the rate law for the reaction: A+B=C+D is second order in [A]° and first order in [B]°. if [A]° is halved and [B] is doubled by what factor the rate of the reaction decrased

the pH of sulfuric acid (H₂SO₄) with a hydrogen ion concentration of 1x10^(-3) M is 3.

To determine the pH of sulfuric acid (H₂SO₄) with a hydrogen ion concentration of 1x10^(-3) M, we can use the pH formula:

pH = -log[H+]

In this case, the hydrogen ion concentration is 1x10^(-3) M. Substituting this value into the formula:

pH = -log(1x10^(-3))

Using a scientific calculator, we can calculate the logarithm of 1x10^(-3) as:

log(1x10^(-3)) = -3

Now, we can find the pH by taking the negative logarithm:

pH = -(-3) = 3

Therefore, the pH of sulfuric acid (H₂SO₄) with a hydrogen ion concentration of 1x10^(-3) M is 3.

for more questions on pH

https://brainly.com/question/172153

#SPJ11

Calculation of milliequivalents in a solution takes into account the concentration and electrical charge of the solute, but not the atomic weight.

The calculation of milliequivalents in a solution takes into account the following three factors: concentration, atomic weight, and electrical charge.
1. Concentration: This is the amount of solute present in a given volume of solution, typically expressed as moles per liter (mol/L). The concentration of the solute directly impacts the number of milliequivalents present in the solution.
2. Atomic weight: The atomic weight is the mass of an element in atomic mass units (amu) and is used to determine the number of moles of a substance. When calculating milliequivalents, we must consider the atomic weight in order to convert the amount of solute from mass to moles.
3. Electrical charge: Milliequivalents are a measure of the chemical combining capacity of a solute based on its electrical charge. Therefore, we must consider the electrical charge of the solute ions to determine the number of milliequivalents present in the solution.
In summary, to calculate the milliequivalents of a solute in a solution, you need to take into account the concentration of the solute, its atomic weight, and its electrical charge.

To know more about milliequivalents Visit:

https://brainly.com/question/31920642

#SPJ11

The atoms that can expand their valence shells when bonding are C (carbon), O (oxygen), and Al (aluminum).

The valence shell of an atom refers to its outermost electron shell, which contains the valence electrons involved in bonding. In general, atoms tend to follow the octet rule, which states that they seek to attain a stable configuration by having eight electrons in their valence shell. However, certain atoms can expand their valence shells and accommodate more than eight electrons in bonding. Carbon (C) is capable of expanding its valence shell when bonding. It has four valence electrons and can form covalent bonds by sharing these electrons with other atoms. By forming multiple bonds, carbon can achieve an expanded octet, exceeding the usual eight electrons in its valence shell. Oxygen (O) is another atom that can expand its valence shell when bonding. It has six valence electrons and can form covalent bonds by sharing these electrons. Similar to carbon, oxygen can form multiple bonds, allowing it to attain an expanded octet. Aluminum (Al) is an exception to the octet rule. It has three valence electrons, and although it cannot achieve an expanded octet through sharing electrons, it can accept additional electrons from other atoms, leading to the expansion of its valence shell. In contrast, atoms such as N (nitrogen) and P (phosphorus) cannot expand their valence shells. Nitrogen has five valence electrons, and it typically forms three covalent bonds to complete its octet. Phosphorus has five valence electrons as well and tends to form three or five covalent bonds. In summary, carbon, oxygen, and aluminum are atoms that can expand their valence shells when bonding. They achieve this by forming multiple bonds or accepting additional electrons.

Learn more about covalent bonds here: brainly.com/question/19382448

#SPJ11

Technician B is correct. Solvents can indeed be reclaimed and reused, reducing both the environmental impact and the need for new solvent production.

Solvents are widely used in various industries and can pose chemical dangers if mishandled or released into the environment. However, the major sources of chemical dangers are not limited to solvents containing chlorinated hydrofluorocarbons (HCFCs). There are many other types of solvents with different chemical compositions that can also present risks.

Technician B's statement about solvents being reclaimable and reusable is accurate. Solvent reclamation involves processes such as distillation, filtration, and purification, which help remove impurities and contaminants from used solvents. This allows the solvents to be restored to a usable condition, reducing waste generation and the need for new solvent production. Solvent reclamation is an effective method for reducing environmental impact, promoting sustainability, and minimizing the potential hazards associated with solvent use.

To learn more about solvents click here: brainly.com/question/11985826

#SPJ11

Mole ratio is a conversion factor that relates the amounts in moles of any two substances in a chemical reaction.

According to this question, 3 moles of chlorine gas reacts with 6 moles of sodium hydroxide, hence, the mole ratio is ½.

The reactant acting as a base is sodium hydroxide (NaOH). The molar mass can be calculated as follows;

23 + 1 + 16 = 40 grams.

Learn more about mole ratio at: https://brainly.com/question/15288923

#SPJ1

The volume occupied by 6.00 g of argon gas under the given conditions calculated by using ideal gas law is approximately 2.48 L.

To calculate the volume of gas, we need to use the ideal gas law: PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature. We can rearrange this equation to solve for volume: V = (nRT)/P.
First, we need to find the number of moles of argon gas present. We can use the molar mass of argon (39.95 g/mol) and the given mass of 6.00 g to find the number of moles:
n = (6.00 g) / (39.95 g/mol) = 0.150 mol
Next, we can plug in the given values for pressure, temperature, and the gas constant (R = 0.08206 L·atm/K·mol) to find the volume:
V = (0.150 mol x 0.08206 L·atm/K·mol x 273 K) / 3.30 atm ≈ 2.48 L
Therefore, the volume occupied by 6.00 g of argon gas under the given conditions is approximately 2.48 L.

Learn more about ideal gas here:

https://brainly.com/question/12677792

#SPJ11

Approximately 17.24 grams of sulfur must be used to produce 13.7 liters of gaseous sulfur dioxide at STP. S8(s)+8Oz(g)->8 So2 (g)

To determine the mass of sulfur required to produce 13.7 liters of gaseous sulfur dioxide at STP, we can use the stoichiometry of the given chemical equation. From the balanced chemical equation, we know that 1 mole of S8 reacts with 8 moles of O2 to produce 8 moles of SO2. We also know that at STP, 1 mole of any gas occupies 22.4 liters of volume. Therefore, we can use the following steps to calculate the mass of sulfur required:

Convert the given volume of SO2 to moles using the ideal gas law:

n = PV/RT = (1 atm x 13.7 L)/(0.08206 L.atm/mol.K x 273 K) = 0.535 mol

Use the stoichiometry of the equation to determine the moles of S8 required:

1 mol S8 : 8 mol SO2

x mol S8 : 0.535 mol SO2

x = 0.067 mol S8

Finally, calculate the mass of S8 required using its molar mass:

mass = n x M = 0.067 mol x 256.5 g/mol = 17.24 g

for more questions on gaseous

https://brainly.com/question/25736513

#SPJ11

a. The process of dissolving solid KBr in water is endothermic as it causes the solution to get colder.

b. The combustion of natural gas (CH4) in a furnace is exothermic, releasing heat.

c. Adding concentrated H2SO4 to water is exothermic, resulting in a very hot solution.

d. Boiling water in a teakettle is endothermic as it requires the input of heat.

a. When solid KBr is dissolved in water, the process is endothermic because energy is absorbed from the surroundings, resulting in a decrease in temperature. The breaking of ionic bonds between K+ and Br- ions requires an input of energy.

b. The burning of natural gas (CH4) in a furnace is an exothermic process. Combustion reactions release energy in the form of heat and light. In this case, natural gas reacts with oxygen to produce carbon dioxide and water, releasing heat energy.

c. Adding concentrated H2SO4 to water is an exothermic process. The dissolution of highly concentrated sulfuric acid in water is highly exothermic, meaning it releases a significant amount of heat energy.

d. Boiling water in a teakettle is an endothermic process. Heat energy from an external source, such as a stove or electric heating element, is supplied to the water to raise its temperature to the boiling point and convert it from a liquid to a gas phase.

To learn more about endothermic click here brainly.com/question/11902331

#SPJ11

The physical changes that are taking place at points X and Z are melting and vaporization respectively.

The melting point of sodium chloride added to this substance will increase.

The relationship between the supply temperature of the heating system and the outside air temperature is known as the heating curve.

In a heating curve of a pure solid, the two points of phase change are the melting point when the solid melts and the boiling point when the liquid vaporizes.

Learn more about melting point at: https://brainly.com/question/25074953

#SPJ1

The binding energy of copper-65 is approximately 29 kJ/mol nucleons. This value represents the energy released when one mole of copper-65 nuclei is formed from its individual nucleons.

The binding energy per nucleon is a measure of the energy required to separate the nucleons within an atomic nucleus. It can be calculated by subtracting the mass of the nucleus from the sum of the masses of its individual nucleons, and then converting the mass difference into energy using Einstein's equation E=mc². For copper-65, the required masses in g/mol are necessary to determine the binding energy. Without the provided masses, it is not possible to perform the calculation accurately. Therefore, additional information, such as the masses of the individual nucleons, is required to calculate the binding energy accurately. However, if we assume that the binding energy per nucleon for copper-65 is given as 29 kJ/mol nucleons, it implies that, on average, each nucleon in copper-65 releases approximately 29 kJ/mol of energy when the nucleus is formed or when nucleons come together to form the copper-65 nucleus.

learn more about binding energy here: brainly.com/question/31817434

#SPJ11

The use of plastic containers in microwaves raises concerns about unsafe chemical exposure.

The use of plastic containers in microwaves raises concerns about unsafe chemical exposure. Plastic containers can release harmful chemicals such as bisphenol A (BPA) and phthalates when heated in the microwave. BPA and phthalates are known to disrupt hormonal balance in the body and have been linked to a variety of health problems such as cancer, developmental issues, and reproductive problems. It is recommended to use glass or ceramic containers when heating food in the microwave as they do not release harmful chemicals and are safer for food storage and reheating. It is important to note that not all plastic containers are created equal, and some may be labeled as microwave safe. However, it is always better to err on the side of caution and choose a safer alternative such as glass or ceramic containers.

To know more about microwaves visit: https://brainly.com/question/1675193

#SPJ11

Eisbocks are made from malted grains that have been harvested frozen, which gives them a rich and intense flavor profile. To create an eisbock, a traditional bock beer is partially frozen so that water ice crystals can be filtered out prior to bottling.

This process, known as freeze distillation or fractional freezing, results in a higher alcohol content and more concentrated flavors. Unlike some other beers, eisbocks are not typically served over ice. Instead, they are usually enjoyed at room temperature or slightly chilled, which allows their complex flavors and aromas to shine. So, the correct answer to your question is "partially frozen so water ice crystals can be filtered out prior to bottling and made from malted grains that have been harvested frozen."

Eisbocks are a type of strong, dark lager beer originating from Germany. They are made by partially freezing the beer so that water ice crystals can be filtered out prior to bottling, resulting in a higher alcohol content and a more concentrated flavor. Eisbocks are not made from malted grains that have been harvested frozen, nor are they always served over ice. So, the correct answer is that eisbocks are partially frozen for ice crystal filtration before bottling.

To know more about eisbocks :

https://brainly.com/question/31149725

#SPJ11

The mass number of the boron atom is the sum of the number of protons and neutrons, which is 5 + 11 = 16. Hence, the mass number of this atom of boron is 16.

Based on the given information, we can determine the mass number of the boron atom. The mass number is the sum of the number of protons and neutrons in the atom.

Since the boron atom is electrically neutral, it means that the number of electrons is equal to the number of protons. Therefore, we can assume that the boron atom has 5 protons since it is a boron atom.

To calculate the number of neutrons, we subtract the number of protons from the total number of particles, which is 16. Thus, the number of neutrons in the boron atom is 16 - 5 = 11.

Therefore, the mass number of the boron atom is the sum of the number of protons and neutrons, which is 5 + 11 = 16. Hence, the mass number of this atom of boron is 16.

To learn more about  Electrons, click here:

https://brainly.com/question/12001116

#SPJ11

When a reaction occurs in a flask, and the flask gets colder, the sign of ΔH is negative (ΔH<0). The symbol ΔH represents the enthalpy change that occurs during a chemical reaction. Enthalpy is a measure of the total heat energy in a system, and it can be either absorbed or released during a chemical reaction. A negative ΔH indicates that heat energy is released during the reaction, resulting in a decrease in temperature of the system.

In the case of an exothermic reaction, where the products have less enthalpy than the reactants, energy is released from the system. As a result, the flask gets colder, indicating that the reaction is exothermic and the sign of ΔH is negative. A negative ΔH is also associated with stronger bonds, which release more energy upon breaking. Understanding the sign of ΔH is crucial in predicting the direction and energy changes that occur during a chemical reaction.

To learn more about direction click here: brainly.com/question/30173481

#SPJ11

Iodide is more soluble in water due to its ionic nature and strong interactions with water molecules, while iodine is more soluble in xylene due to its nonpolar nature and weaker interactions with water.

The solubility of a substance in a solvent depends on the types of intermolecular forces present between the solute and solvent. Iodide, being an ionic compound, forms strong electrostatic interactions with the polar water molecules (hydrogen bonds), resulting in its higher solubility in the water phase.

On the other hand, iodine is a nonpolar molecule with weaker dispersion forces. It does not interact strongly with polar water molecules, making it less soluble in water. Xylene, a nonpolar solvent, forms dispersion forces with iodine, which are more favorable than the interactions between iodine and water. Therefore, iodine is more soluble in the xylene phase.

Learn more about intermolecular forces here:

https://brainly.com/question/29388558

#SPJ11

Melting and glass transition are two distinct processes that occur in materials, but they are often confused with each other. The main difference between melting and glass transition lies in the change in the physical state of the material.

Melting is a process in which a solid material is heated to a temperature at which its crystalline structure breaks down and becomes a liquid. On the other hand, glass transition is a process in which a solid material is heated to a temperature at which its amorphous structure transitions from a rigid state to a more fluid-like state. Melting occurs in materials that have a well-defined crystal structure, such as metals, ceramics, and some polymers. When these materials are heated, their atoms vibrate more rapidly and eventually become so energetic that the bonds holding them together break down, and the material transitions into a liquid state.

During melting, the material goes through a gradual transition from a solid state to a liquid state, with the molecules and atoms moving more freely as the temperature increases.Glass transition, on the other hand, occurs in amorphous materials such as glasses, some plastics, and other non-crystalline solids. These materials lack a well-defined crystal structure and have a disordered arrangement of atoms or molecules. When amorphous materials are heated, their atoms or molecules gain kinetic energy, causing them to move more rapidly. At a certain temperature, known as the glass transition temperature (Tg), the material becomes more flexible and rubbery, and it can be shaped or molded more easily. However, the material is still a solid, and it does not flow like a liquid.

To know more about physical state visit :

https://brainly.com/question/13265083

#SPJ11

In the experiment where sodium chloride or table salt was added to water, the process observed was dissolution or solubility.

This is because sodium chloride dissolves in water due to the polar nature of water molecules. When salt is added to water, it breaks down into positively charged sodium ions and negatively charged chloride ions. These ions then interact with the polar water molecules, forming hydration shells around them. This leads to the breaking of the ionic bonds that hold the sodium chloride molecules together and the subsequent dissolution of the salt in the water. The process can be seen in the illustrations where the salt crystals gradually disappear as they dissolve in the water. This experiment helps to demonstrate the concept of solubility and how substances can dissolve in different solvents based on their properties.

To know more about Sodium chloride visit:

https://brainly.com/question/14516846

#SPJ11

The solid commonly used as an inactive electrode in electrochemical cells is Graphite. So option b is the correct answer.

Graphite is often chosen as an electrode material because it is chemically inert, highly conductive, and has a stable structure. This makes it suitable for various electrochemical applications without affecting the overall cell reactions.

An inactive electrode, also known as an inert electrode, is an electrode that does not participate in the chemical reaction occurring in the cell but serves as a conductor for the flow of electrons.

The graphite working electrode, which can be employed as an anode or a cathode in various electrochemical applications, is renowned for its chemical stability, superior electrical conductivity, and high melting point.

So the correct answer is option b. Graphite.

To know more about electrodes: https://brainly.com/question/25749323

#SPJ11

The statemtent C l F 3 has 'T-shaped' geometry. There are non-bonding domains in this molecule has correct option c) 2 . The number of non-bonding domains in ClF3 is option c) 2.

Chlorine trifluoride (ClF3) has a "T-shaped" molecular geometry due to the presence of two non-bonding electron domains, in addition to the three bonding domains formed by the Cl-F bonds. In an explanation of the molecule's structure, the central chlorine atom is surrounded by five electron domains, consisting of three bonding domains and two non-bonding domains. The non-bonding domains occupy equatorial positions, forcing the three fluorine atoms into a "T-shaped" arrangement.

To know more about electron visit:

brainly.com/question/12001116

#SPJ11

The most likely reaction to take place based on the activity series is the reaction of lithium with copper(II) sulfate. This is because lithium is higher in the activity series than copper, and therefore has a greater tendency to displace copper from its salt solution.

The activity series is a list of metals in order of their reactivity. Metals higher in the series are more reactive than metals lower in the series. A metal will displace another metal from its salt solution if it is higher in the activity series.

In the given list, lithium is higher in the activity series than copper. Therefore, lithium will displace copper from copper(II) sulfate solution. This reaction will produce copper metal and lithium sulfate solution.

To learn more about activity series brainly.com/question/14129976

#SPJ11

The fatty acid that is also known as 18:2 is linoleic acid. It is an essential omega-6 fatty acid that cannot be produced by the human body and must be obtained through the diet.

Linoleic acid plays a crucial role in maintaining healthy skin, hair, and nails, as well as supporting immune function and promoting proper growth and development. It is found in many foods such as nuts, seeds, vegetable oils, and meat. However, it is important to note that excessive intake of linoleic acid can lead to inflammation and other health issues, so it should be consumed in moderation and as part of a balanced diet.

To learn more about acid click here: brainly.com/question/3333368

#SPJ11

The ion that has 46 electrons and has lost 4 electrons is the ion of palladium (Pd2+).

An atom of palladium has 46 electrons, and in a neutral state, it also has 46 protons. When four electrons are removed from the palladium atom, it results in a positively charged ion, Pd2+.

The loss of electrons creates an imbalance in the number of electrons and protons, resulting in a net positive charge of +2 on the ion.

The electronic configuration of palladium is [Kr]4d10 5s0, and when two electrons are removed, the remaining electronic configuration is [Kr]4d8. Palladium is a transition metal and belongs to Group 10 of the periodic table.

Pd2+ ion is formed by the loss of valence electrons from the 4d orbital, which has a higher energy level than the 5s orbital. Pd2+ ion has a smaller radius than the neutral atom, as it has lost two electrons and the remaining electrons are now held more tightly by the nucleus.

The Pd2+ ion has important applications in catalysis and electrochemistry.

Visit here to learn more about Electrons:

brainly.com/question/860094

#SPJ11

We need 79.96 grams of oxygen (atomic weight 16) to completely react with 10 grams of hydrogen (atomic weight 1) to form hydrogen peroxide, H2O2.

To determine the mass of oxygen needed to completely react with 10 grams of hydrogen to form hydrogen peroxide, we need to first balance the chemical equation for the reaction:
2H2 + O2 → 2H2O2
From this equation, we can see that two moles of hydrogen (2 x 2.016 = 4.032 g) react with one mole of oxygen (15.999 g) to produce two moles of hydrogen peroxide (2 x 34.014 = 68.028 g).
Since we only have 10 grams of hydrogen, we need to determine how much oxygen is needed to react with that amount.
Using stoichiometry, we can set up a proportion:
2 moles of H2 / 1 mole of O2 = 10 g of H2 / x grams of O2
Solving for x:
x = (10 g H2 x 1 mole O2 / 2 moles H2) x (15.999 g O2 / 1 mole O2)
x = 79.96 g of O2
To know more about stoichiometry Visit:

https://brainly.com/question/28780091

#SPJ11

HBrO is the stronger Brønsted-Lowry acid compared to HBr.

This is because the electronegativity of the oxygen atom in HBrO is higher than the electronegativity of the bromine atom in HBr,

making the hydrogen atom in HBrO more likely to dissociate in water and donate a proton (H+) to form H3O+.

The dissociation of HBrO in water results in the formation of H3O+ and BrO-,

while the dissociation of HBr in water results in the formation of H3O+ and Br-.

Therefore, HBrO has a greater tendency to donate a proton than HBr, making it the stronger Brønsted-Lowry acid.

To know more about  Brønsted-Lowry refer here

https://brainly.com/question/15885173#

#SPJ11

B. Cooling causes air to contract and heating causes air to expand.

The graph shows that the circumference of the test balloon decreases when placed in the freezer and increases when left on the table. This indicates that cooling causes the air inside the balloon to contract, resulting in a decrease in circumference. Conversely, when the balloon is left on the table, it returns to its original size, indicating that the air inside expands when heated.

Therefore, the statement that best explains the differences seen between the two balloons during the experiment is that cooling causes air to contract and heating causes air to expand (option B).

For a pair of coordination complexes to be enantiomers, they must have the same molecular formula and connectivity but differ in their three-dimensional arrangement.

This means that they must have a chiral center. In other words, they must have a central metal ion (m) that is coordinated with different ligands (l1, l2, l3, l4, l5) in a way that results in a non-superimposable mirror image. Two choices that can result in a pair of enantiomers are (R)-m(l1)(l2)(l3)(l4)(l5) and (S)-m(l1)(l2)(l3)(l4)(l5). These two complexes differ only in the arrangement of ligands around the metal ion, resulting in a mirror image that cannot be superimposed.

In the given generalized coordination complex, M is the central metal ion, and L1, L2, L3, L4, and L5 are five distinct ligands. To identify a pair of enantiomers, we should look for complexes with a non-superimposable mirror image, which is a key characteristic of chiral molecules. A common example is an octahedral complex with three bidentate ligands (L1, L2, and L3). In this case, if the arrangement of ligands around the central metal ion (M) creates a pair of complexes that are mirror images of each other but cannot be superimposed, then these two complexes are enantiomers.

To learn more about  coordinate, click here:

https://brainly.com/question/22261383

#SPJ11

False. Infants do need omega-3 sources for their development, particularly for the growth and development of their brain and eyes. Omega-3 fatty acids are essential for healthy brain function and development in infants.

Breast milk is a rich source of omega-3 fatty acids, and it is recommended that mothers consume enough omega-3 fatty acids during pregnancy and breastfeeding to support their infant's development. Omega-3 fatty acids can also be found in some infant formulas. While omega-3 fatty acids are important for preventing cardiovascular disease in adults, they serve many other functions in the body, including supporting healthy brain development in infants.
In conclusion, it is false that infants don't need omega-3 sources. Omega-3 fatty acids are essential for the development of their brain and eyes. Mothers should ensure they consume enough omega-3 fatty acids during pregnancy and breastfeeding, and some infant formulas contain omega-3 fatty acids as well. While omega-3 fatty acids are also important for preventing cardiovascular disease in adults, they serve many other vital functions in the body.

To know more about cardiovascular disease visit:

brainly.com/question/29802206

#SPJ11

Answer: C

Explanation:

Reaction 1 starts off with one mole of reactant and produces 2 moles of product. The increase in the number of moles, along with the fact that aqueous compounds are more disordered than solid compounds, increases the disorder and thus entropy.

Reaction 2 starts off with 1 mole of solid and produces 1 mole of solid and one mole of gas. The increase in the number of moles, along with the fact that gases are more free and disordered than solids, increases the disorder and thus entropy.

To change the pH of a 10.0 ml sample of HCl solution from 2.00 to 4.00, approximately 90 ml of water should be added. This dilution process will decrease the concentration of HCl and increase the volume, resulting in a higher pH value.

The pH scale is a logarithmic scale that measures the acidity or alkalinity of a solution. A pH of 2.00 indicates a highly acidic solution, while a pH of 4.00 is less acidic and closer to neutral. By diluting the HCl solution with water, the concentration of HCl decreases while the volume increases, leading to a change in pH. To calculate the volume of water needed, we can use the formula for dilution:

C₁V₁ = C₂V₂

Where C₁ and V₁ represent the initial concentration and volume of the HCl solution, while C₂ and V₂ represent the desired concentration and volume after dilution. In this case, the initial volume is given as 10.0 ml, and the initial pH is 2.00. The pH scale is logarithmic, meaning that each unit represents a tenfold change in acidity or alkalinity. Therefore, a change of 2 units on the pH scale corresponds to a 100-fold decrease in HCl concentration. To increase the pH from 2.00 to 4.00, we need to reduce the HCl concentration by a factor of 100. By rearranging the dilution formula and solving for V₂, we find:

V₂ = (C₁V₁) / C₂ = (10.0 ml * 100) / 1 = 1000 ml

Thus, to change the pH of the HCl solution to 4.00, approximately 90 ml of water should be added to the initial 10.0 ml sample, resulting in a total volume of 100 ml.

learn more about logarithmic scale here: brainly.com/question/30188635

#SPJ11

Sterling silver is a homogeneous mixture, meaning it has only one phase. Therefore, the answer is: 1 phase.

A homogeneous mixture is a type of mixture in which the composition is uniform throughout the entire mixture. In other words, all the components or substances that make up the mixture are evenly distributed, and it is not possible to distinguish between them by physical means.

An example of a homogeneous mixture is a solution. When salt dissolves in water, it forms a homogeneous mixture because the salt ions are evenly distributed throughout the water, and the mixture appears to be a single, uniform substance. Other examples of homogeneous mixtures include alloys (such as brass or steel), air, and some types of soil.

Visit here to learn more about homogeneous mixture brainly.com/question/30587533

#SPJ11