The ratio is very close to 1 C to 2 H.
What is the empirical formula?
A. C₂H
B. CH₂
C. C₂H₂

B) The reactions proceed with a net release of free energy.
Exergonic reactions are those that release energy.

In these reactions, the products have less potential energy than the reactants, and the difference between the two is given off as free energy that can be harnessed to do work. This means that the products have lower free energy than the reactants.
For a reaction to be exergonic, the change in Gibbs free energy (ΔG) must be negative, which indicates that the reaction is spontaneous and will proceed without the input of additional energy. This is in contrast to endergonic reactions, which require an input of energy to proceed.
The rate of exergonic reactions can vary widely, and they may occur at different rates depending on the specific conditions of the reaction, such as temperature, concentration, and catalysts.
Exergonic reactions are important in many biological processes, including the breakdown of glucose in cellular respiration, the hydrolysis of ATP to provide energy for cellular processes, and the digestion of food.

Learn more about exergonic reactions here:

https://brainly.com/question/270229

#SPJ4

Gram staining property of a bacterium is dependent on the structure of its cell wall, which either retains or loses the crystal violet dye during the staining process.

Gram staining is a laboratory technique used to differentiate bacterial species into two groups based on the structure of their cell walls: Gram-positive and Gram-negative. During the staining process, the bacterial cells are initially stained with crystal violet, then treated with iodine, and washed with alcohol. Gram-positive bacteria have a thick layer of peptidoglycan in their cell walls, which allows them to retain the crystal violet stain and appear purple under a microscope. In contrast, Gram-negative bacteria have a thin layer of peptidoglycan and an outer membrane that contains lipopolysaccharides, which causes them to lose the crystal violet stain and appear red or pink under a microscope. The Gram staining property of a bacterium is important for identifying and classifying bacterial species, as well as for selecting appropriate antibiotic treatments.
Peptidoglycan is a polymer consisting of sugars and amino acids that forms a mesh-like structure in the cell wall of bacteria, providing rigidity and protection against osmotic pressure. Lipopolysaccharides are complex molecules that are part of the outer membrane of Gram-negative bacteria, contributing to their structural integrity and resistance to antibiotics.

Learn more about peptidoglycan and lipopolysaccharides here:

https://brainly.com/question/13021055

#SPJ4

The density of an object is its mass divided by volume. The mass of a the stopper is given 5.06 g with a volume of 4.2 ml . Then the density of the stopper is 1.2 g/ml.

Density of substance is the measure of its mass per unit volume. It describes how closely its particles are packed. Density depends on the bond type, temperature and pressure.

Volume of the object is the space occupied by its particles. Volume can be expressed in L, ml, cm³, dm³ etc. Only solids and liquids has a definite volume and the volume of gases is that of the container.

Give that, volume of water = 45.2 ml

Total volume = 49.4 ml.

then volume of stopper = 49.4 - 45.2 = 4.2 ml.

Mass of stopper = 5.06  kg

density  =  mass/volume

             = 5.06 g / 4.2 ml

             =  1.2 g/ml

Therefore, the density of the stopper is 1.2 g/ml.

Find more on density:

brainly.com/question/15164682

#SPJ1

A mole of Chromebooks lined up end to end would encircle the moon approximately 1.59 x 10^16 times.

The length of a standard-size school Chromebook is 11.6 inches.

To determine the number of times a mole of Chromebooks lined up end to end would encircle the moon, we need to first convert the length of one Chromebook into meters and then multiply that by Avogadro's number, which is the number of particles in a mole.

One Chromebook is 11.6 inches long, which is approximately 0.2946 meters. Avogadro's number is 6.022 x 10^23.

So, the total length of a mole of Chromebooks lined up end to end would be:

0.2946 meters * 6.022 x 10^23 = 1.75 x 10^24 meters

The circumference of the moon is approximately 10,917 kilometers, which is equal to 10,917,000 meters.

Learn more about a mole at: https://brainly.com/question/29367909

#SPJ1

Answer:

A redox reaction, also known as oxidation-reduction reaction, is a type of chemical reaction in which the oxidation state of a molecule changes due to the transfer of electrons from one molecule to another molecule.

Answer:

A chemical reaction that takes place between an oxidizing substance and a reducing substance.

Explanation:

The gas which have highest average kinetic energy per mole at 298K is b)CO₂.So,correct option is b.

The kinetic energy of gases is a straightforward, generally critical traditional model of the thermodynamic way of behaving of gases, with which numerous foremost ideas of thermodynamics were laid out. The model depicts a gas as an enormous number of indistinguishable submicroscopic particles (iotas or atoms), which are all in consistent, fast, irregular movement. Their size is thought to be a lot more modest than the typical distance between the particles. The particles go through irregular flexible impacts among themselves and with the encasing walls of the compartment. The fundamental rendition of the model depicts the best gas, and thinks about no different communications between the particles.

The kinetic energy of gases makes sense of the perceptible properties of gases, like volume, pressure, and temperature, as well as transport properties like consistency, warm conductivity and mass diffusivity. Because of the time reversibility of minute elements (minuscule reversibility), the motor hypothesis is likewise associated with the guideline of nitty gritty equilibrium, concerning the variance dissemination hypothesis (for Brownian movement) and the Onsager proportional relations.

We know that average kinetic energy is given by the formula =(1/2) mv²

Since temperature is same for all gases, so speed will remain same.

Now,molecular mass will be deciding factor.So,gas which have high molecular mass will have more average kinetic energy.

Molecular mass of O₂=32g

Molecular mass of CO₂=44g

Molecular mass of H₂O(g)=18g

Molecular mass of H₂O(l)=18g

Hence,option b is correct.

To know more about kinetic energy,visit here:

https://brainly.com/question/26472013

#SPJ4

To determine the Vmax and Km of an enzymatic reaction using the Michaelis-Menten model, scientists must maintain constant enzyme and reaction times.

monitor the product concentration at different substrate concentrations, and use controls to ensure that observed changes are due to enzymatic activity

1. They only take into account the rate of the first reaction for each substrate concentration.

2. The first substrate concentrations tested are all significantly higher than the initial enzyme concentrations.

— The concentration of substrate at which 12Vmax occurs is Km.

Three underlying premises underlie the Michaelis-Menten equation:

The substrate concentration [S] during the reaction is constant according to the free ligand assumption.

2. The steady-state hypothesis postulates that the amount of ES remains constant during the reaction, allowing the rate of product creation to stay constant.

3. According to the irreversibility assumption, the reaction only moves in one direction and the product cannot be changed back into the substrate.

Learn more about enzyme here:

https://brainly.com/question/1865289

#SPJ4

In water, 1 mol of Al(ClO₃)₃ (aq) will dissociate into two moles of Al³⁺ ions and three moles of ClO³⁻ions.

In water, 1 mol of Al(ClO₃)₃ (aq) will dissociate into the following ions: Al³⁺and ClO³⁻.

When Al(ClO₃)₃ is dissolved in water, it will dissociate into its constituent ions. The Al³⁺ ion will separate from the three ClO³⁻ ions. This process is known as dissociation and is a common occurrence when ionic compounds are dissolved in water.

The resulting solution will contain Al³⁺ and ClO³⁻ions that are free to move around and interact with other ions in the solution. In summary, 1 mol of Al(ClO₃)₃ (aq) will dissociate into 1 mol of Al³⁺ ions and 3 mol of ClO³⁻ ions in water.

Learn more about dissociate at https://brainly.com/question/9187417

#SPJ11

In an ecosystem, the coastal area  that is rotating toward the moon is the area where  tide rising to form a high tide.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .

Learn more about ecosystem,here:

https://brainly.com/question/1673533

#SPJ1

The gram formula mass of a compound if 5 moles of the compound have a mass of 100 grams would be 20 grams/mole.

The gram formula mass of a compound is the total weight of all atoms in a molecule or a formula unit of a substance.

It is also the ratio of the mass of a compound and the number of moles present in the mass of the compound.

Gram formula mass = mass/mole

In this case, mass = 100 grams, and mole = 5 moles

Gram formula mass = 100/5

                                 = 20 grams/mole

In other words, the gram formula mass of the compound is 20 grams/mole.

More on gram formula mass can be found here: https://brainly.com/question/15232447

#SPJ1

The molar mass of the monoprotic acid, given that 1.07 g of the acid was dissolved in water is 192.27 g/mol

We'll begin by obtaining the mole of KOH in the solution. Details below:

Mole = Molarity x Volume

Mole of KOH = 0.210 × 0.0265

Mole of KOH = 0.005565 mole

Next, we shall determine the mole of the monoprotic acid. Details below:

Balanced equation:

HA + KOH —> KA + H₂O

From the balanced equation above,

1 mole of KOH reacted with 1 mole of HA.

Therefore,

0.005565 mole of KOH will also react with 0.005565 mole of HA.

Finally, we shall determine the molar mass of the monoprotic acid. Details below:

Molar mass = mass / mole

Molar mass of monoprotic acid = 1.07 / 0.005565

Molar mass of monoprotic acid = 192.27 g/mol

Learn more about molar mass:

https://brainly.com/question/25645713

#SPJ1

you need to measure out 17.0 grams of NaOH to prepare a 1.7 M solution of 250.0 mL.

To calculate the amount of NaOH needed to prepare a 1.7 M solution of 250.0 mL, we can use the formula:

moles of solute = concentration (in M) x volume (in L)

First, we need to convert the volume from milliliters to liters:

250.0 mL = 250.0 / 1000 = 0.25 L

Now, we can plug in the values:

moles of NaOH = 1.7 M x 0.25 L

moles of NaOH = 0.425 mol

Finally, we can calculate the mass of NaOH required using its molar mass:

mass of NaOH = moles of NaOH x molar mass of NaOH

The molar mass of NaOH is 40.00 g/mol (sodium: 22.99 g/mol, oxygen: 15.99 g/mol, hydrogen: 1.01 g/mol).

mass of NaOH = 0.425 mol x 40.00 g/mol

mass of NaOH = 17.0 g

Therefore, To calculate the amount of NaOH needed to prepare a 1.7 M solution of 250.0 mL, we can use the formula:

moles of solute = concentration (in M) x volume (in L)

First, we need to convert the volume from milliliters to liters:

250.0 mL = 250.0 / 1000 = 0.25 L

Now, we can plug in the values:

moles of NaOH = 1.7 M x 0.25 L

moles of NaOH = 0.425 mol

Finally, we can calculate the mass of NaOH required using its molar mass:

mass of NaOH = moles of NaOH x molar mass of NaOH

The molar mass of NaOH is 40.00 g/mol (sodium: 22.99 g/mol, oxygen: 15.99 g/mol, hydrogen: 1.01 g/mol).

mass of NaOH = 0.425 mol x 40.00 g/mol

mass of NaOH = 17.0 g

Therefore, you need to measure out 17.0 grams of NaOH to prepare a 1.7 M solution of 250.0 mL.

Find out more about naoh solution.

brainly.com/question/28177652

#SPJ4

When we have 10% (m/v) ibuprofen on hand, we have to add 48ml of 10% (m/v) solution.

Lets say, we need 'x' ml of ibuprofen

the molecular weight of ibuprofen = 206.29 g/mol

now we know 4%(m/v) ibuprofen means 100ml of the total solution contains 4g of ibuprofen = 4g/206.29g/mol

= [tex]\frac{4}{206.29}[/tex]mol of ibuprofen

100 ml contains = [tex]\frac{4}{206.29}[/tex]mol

therefore 120 ml contains = = [tex]\frac{4}{206.29}[/tex] x 120 mol........(1)

10% (m/v) means 100ml contains mol

therefore we know 'x' ml is

10/206.29 × x mol........(ii)

we can say that (i) = (ii)

so we get,

120×4 = 10x

10x = 480

x = 48

so now we have to add 48ml of 10% (m/v) solution.

S₁×v₁ = S₂v₂

∴4 × 120 = 8 × v₂

v₂ = 48

To learn more about volume, click here:

brainly.com/question/29064747

#SPJ4

The contribution to the percentage error in the freezing point depression due to the errors in the thermometer readings is 1.76%.

The freezing point depression is a colligative property that depends only on the molality of the solute particles in a solution and is independent of the identity of the solute. Therefore, the freezing point depression is given by the equation:

ΔTf = Kf x molality

where ΔTf is the change in the freezing point, Kf is the freezing point depression constant for the solvent, and molality is the concentration of solute particles in moles per kilogram of solvent.

However, in this case, there are errors in the thermometer readings that can contribute to the uncertainty in the calculated freezing point depression. The errors are +0.12°C for the initial thermometer and -0.11°C for the borrowed thermometer.

The total error due to thermometer readings is the sum of the errors from both thermometers, which is:

Total error = +0.12°C - 0.11°C = +0.01°C

The percentage error due to the thermometer readings can be calculated as:

Percentage error = (total error / measured freezing point) x 100%

The measured freezing point is the sum of the actual freezing point depression and the error due to the thermometer readings. Assuming that the actual freezing point depression was accurately measured, the measured freezing point can be expressed as:

Measured freezing point = actual freezing point depression + total error

Since the molality of the solution is given as 0.30, the actual freezing point depression can be calculated using the freezing point depression constant for the solvent.

Assuming a typical freezing point depression constant for the water of 1.86°C/m, the actual freezing point depression would be:

actual freezing point depression = Kf x molality = 1.86°C/m x 0.30 mol/kg = 0.558°C

Therefore, the measured freezing point would be:

Measured freezing point = actual freezing point depression + total error = 0.558°C + 0.01°C = 0.568°C

The percentage error due to the thermometer readings would be:

Percentage error = (total error / measured freezing point) x 100% = (0.01°C / 0.568°C) x 100% = 1.76%

To learn more about freezing point depression

https://brainly.com/question/12844810

#SPJ4

Answer:

nevermind it was B got it right :)

Explanation:

have a good

Pasteurization was first developed to kill spoilage bacteria in wine.

Pasteurization is a procedure in which a liquid is subjected to a high temperature for a certain time and then cooled rapidly in order to destroy the microorganisms present in it without altering the qualities of the liquid.

Pasteurization was first developed by Louis Pasteur to kill spoilage bacteria in wine. Before the pasteurization process was developed, wine contained bacteria that caused fermentation leading to unpleasant flavors and toxins dangerous to humans.

Learn more about Pasteurization here https://brainly.com/question/3119262

#SPJ11

If we wanted to produce 4.30 grams of iron (III) hydroxide, the ml of 1.00 M Fe(NO₃)₃  excess sodium hydroxide is 0.040 L.

The mass of the iron (III) hydroxide = 4.30 grams

The mass molar  of iron (III) hydroxide = 106.87 g/mol

The moles of the iron (III) hydroxide = mass /molar mass

The moles of the iron (III) hydroxide = 4.30 / 106.87

The moles of the iron (III) hydroxide = 0.040 mol

The molarity = 1 M

The volume = moles / molarity

Volume = 0.040 / 1

Volume = 0.040 L

Thus, the volume of Fe(NO₃)₃  is 0.040 L.

To learn more moles here

https://brainly.com/question/29076435

#SPJ4

After 2.4 hours, only 15.8% of the initial concentration of N2O5 will remain when  first-order reaction 2N2O5 -> 2N2O4 + O2 at a particular temperature. The half-life of N2O5 is 0. 90 hours.

The first-order reaction 2N2O5 -> 2N2O4 + O2 has a rate constant k that can be determined using the half-life of N2O5. The half-life of a first-order reaction is given by the equation:

t1/2 = ln(2) / k

where t1/2 is the half-life and ln is the natural logarithm.

Substituting the given half-life of 0.90 hours into this equation, we can solve for the rate constant k:

0.90 = ln(2) / k

k = ln(2) / 0.90

k = 0.77 / hour

Now we can use the integrated rate law for a first-order reaction to determine the fraction of the initial concentration of N2O5 that will remain after 2.4 hours:

ln([N2O5]t/[N2O5]0) = -kt

where [N2O5]t is the concentration of N2O5 at time t, [N2O5]0 is the initial concentration of N2O5, and k is the rate constant.

We want to find [N2O5]t/[N2O5]0 when t = 2.4 hours. We know that t1/2 = 0.90 hours, so after one half-life (0.90 hours), the concentration of N2O5 will be reduced to half its initial value. After two half-lives (1.80 hours), the concentration will be reduced to one quarter of its initial value, and so on. We can use this information to determine that 2.4 hours is equal to 2.67 half-lives:

2.4 hours / 0.90 hours per half-life = 2.67 half-lives

Substituting this value into the integrated rate law, we get:

ln([N2O5]t/[N2O5]0) = -kt

ln([N2O5]t/[N2O5]0) = -(0.77 / hour) x (2.4 hours)

ln([N2O5]t/[N2O5]0) = -1.85

Taking the antilogarithm of both sides, we get:

[N2O5]t/[N2O5]0 = e^-1.85

[N2O5]t/[N2O5]0 = 0.158

Therefore, after 2.4 hours, only 15.8% of the initial concentration of N2O5 will remain.

To know more about concentration:-

brainly.com/question/10725862

#SPJ4

The observation that shows a change in state of matter has occurred is option A) Wood burns, producing gas and an ashy residue.

A change in state of matter refers to the transformation of a substance from one physical state to another, such as from solid to liquid, liquid to gas, or vice versa. In option A, when wood burns, it undergoes a chemical reaction known as combustion.

During combustion, the wood reacts with oxygen in the air and undergoes a transformation from a solid state to a gaseous state, producing gas (such as carbon dioxide and water vapor) as well as an ashy residue (solid carbon and other impurities remaining after the combustion process). This change in state is accompanied by the release of heat and light.

Option B, where dew forms on the grass overnight, does not indicate a change in state of matter. Dew formation is a physical process known as condensation, where water vapor in the air cools down and changes into liquid water droplets upon contact with a colder surface (such as grass). In this case, the state of matter remains the same (from a gaseous state to a liquid state), and no new substances are formed.

Option C, where an alkali indicator changes color when added to a cleaner, also does not represent a change in state of matter. It suggests a chemical reaction between the alkali indicator and the cleaner, resulting in a color change. However, the states of matter involved (liquid or solid) do not change during this process.

In summary, option A is the observation that indicates a change in state of matter, as it involves the transformation of wood from a solid state to a gaseous state during combustion.

For more such question on matter visit:

https://brainly.com/question/1172629

#SPJ8

Oxygen and carbon dioxide are two substances that can diffuse directly from the blood through the plasma membrane of endothelial cells.

After exiting circulation, red blood cells transport oxygen, which is required for aerobic respiration, and this oxygen diffuses into the body's cells.

Carbon dioxide is produced as a byproduct of cellular respiration and diffuses into the bloodstream from the cells. In contrast to carbon dioxide and oxygen steroid hormones are too large to diffuse through the membrane instead they must be transferred into or out of the cell by a specific carrier molecule known as a transporter protein.

As a result, steroid hormones do not rapidly diffuse past the plasma membrane of endothelial cells and depart the body.

Learn more about diffusion in blood:

https://brainly.com/question/14119214

#SPJ4

When aqueous solutions of barium nitrate and potassium carbonate are mixed, a precipitate of barium carbonate (BaCO3) will form.

A precipitate is a solid that forms and separates out of a solution when two or more soluble compounds are mixed together.

The balanced chemical equation for the reaction is:

Ba(NO3)2 (aq) + K2CO3 (aq) → BaCO3 (s) + 2 KNO3 (aq)

In this reaction, the barium cation (Ba2+) from barium nitrate (Ba(NO3)2) combines with the carbonate anion (CO32-) from potassium carbonate (K2CO3) to form the insoluble salt barium carbonate (BaCO3), which precipitates out of solution.

Note that the potassium cation (K+) and the nitrate anion (NO3-) remain in solution as soluble salts, potassium nitrate (KNO3).

To learn more about Precipitate :

https://brainly.com/question/20925010

#SPJ4

The Silicates are a class of chemicals that includes the most prevalent minerals on Earth.

Over 90% of the crust of the Earth is made up of the roughly 1,000 silicate minerals. The largest mineral group by far is the silicate family. The two silicate minerals that are most prevalent are feldspar and quartz. Both minerals are very widespread rock-forming minerals.

Silicate minerals are exceptionally stable and prevalent in crustal rocks and sediments because oxygen and silicon are the two most plentiful elements in the Earth's crust and because the (SiO4) tetrahedron is such a stable complex. They predominate in numerous sedimentary rocks as well as igneous and metamorphic rocks.

To know more about Silicates visit:-

https://brainly.com/question/29560091

#SPJ1

It is False that acid rain can damage your skin so the correct option among group of choices is (B) False.

Acid rain typically refers to rain with a pH below 5.6, which is more acidic than normal rain. While acid rain can damage certain materials, such as metals and buildings, it is unlikely to directly damage human skin. This is because the skin has a protective outer layer that helps to regulate the pH and prevent the penetration of harmful substances.

However, swimming in an acidic lake could potentially damage the skin, as the acid can disrupt the pH balance of the skin and cause irritation or burns. Additionally, exposure to acid rain can indirectly harm human health by damaging crops and forests, which can impact the food supply and air quality.

Learn more about Acid rain here:

https://brainly.com/question/11543614

#SPJ4

the percentage of chlorine in the pool will be % When the amount of chlorine in the pool is equal to the amount that was in the city water.

The pool has a total volume of gal, and it is initially filled with water containing % chlorine. Starting at t0, city water containing % chlorine is pumped into the pool at a rate of gal/min. At the same time, the pool water flows out of the pool at the same rate.

After minutes, the pool will contain % chlorine. This can be determined by calculating the amount of chlorine that will be in the pool after minutes, which is calculated by adding the amount of chlorine that was initially in the pool and the amount of chlorine that will be added to the pool from the city water. When the amount of chlorine in the pool is equal to the amount that was in the city water, the percentage of chlorine in the pool will be %.

When the pool water reaches % chlorine, this will happen after minutes. This can be determined by calculating the amount of chlorine that will be in the pool after minutes, which is calculated by subtracting the amount of chlorine that was initially in the pool, and adding the amount of chlorine that will be added to the pool from the city water. When the amount of chlorine in the pool is equal to the amount that was in the city water, the percentage of chlorine in the pool will be %.

To know more about percentage of chlorine click here:

brainly.com/question/14988832

#SPJ4

The largest change in entropy will be in c) C(graphite)  -----> C(diamond).So,correct option is c.

Entropy is a logical idea, as well as a quantifiable actual property, that is generally usually connected with a condition of turmoil, haphazardness, or vulnerability. The term and the idea are utilized in assorted fields, from traditional thermodynamics, where it was first perceived, to the minuscule depiction of nature in measurable material science, and to the standards of data hypothesis. It has found far-going applications in science and physical science, in natural frameworks and their connection to life, in cosmology, financial aspects, social science, climate science, environmental change, and data frameworks remembering the transmission of data for telecommunication.

The thermodynamic idea was alluded to by Scottish researcher and designer William Rankine in 1850 with the names thermodynamic capability and intensity potential. In 1865, German physicist Rudolf Clausius, one of the main pioneers behind the field of thermodynamics, characterized it as the remainder of a little measure of intensity to the prompt temperature.

Hence,correct option is c.

To know more about entropy,visit here:

https://brainly.com/question/30691597

#SPJ4

(Complete question) is:

Which change occurs with the largest increase in entropy at 25°C?

a)Br₂(l)----->Br₂(g)

b)Br₂(g)-------->Br(l)

c)C(graphite)-------->C(diamond)

d)H₂O(s)-------->H₂O(l)

It is more accurate to standardize the NaOH with KHP than to standardize with a solution of HCl because it is stable under the acid base reaction conditions and has a high molecular weight.

Titration processes may occasionally claim a standardization process to regularize a secondary standard using a primary standard. This is because a secondary standard is what will be used in the titration of a certain analyte and its original attention may not be known directly beforehand.

Strong base solutions need to be standardised since chemicals like NaOH will inadvertently pick up moisture from the air and react with gases like CO2 to produce undesired contaminants in the base's stock sample. As a result, we cannot be certain that the mass of NaOH pellets we measure to create a desired solution is the mass of NaOH itself. The bulk consists of all of the impurities together. As a result, we cannot be certain of the base concentration in the solution we make.

Learn more about Solution of KHP:

https://brainly.com/question/15411716

#SPJ4

The percent by mass of water in the hydrated compound is 60.3%.

Percentage by mass is a way to express the concentration of a solution or the composition of a mixture as a percentage of the total mass of the solution or mixture. It is calculated by dividing the mass of the solute or component of interest by the total mass of the solution or mixture and multiplying by 100%.

The formula for percentage by mass is:

Percentage by mass = (Mass of solute or component / Total mass of solution or mixture) x 100%

The mass of water in the hydrated compound can be calculated by subtracting the final mass of the anhydrate from the initial mass of the hydrated:

Mass of water = Initial mass of hydrated - Final mass of anhydrate Mass of water = 9.5 g - 3.77 g Mass of water = 5.73 g

The percent by mass of water in the hydrated compound can be calculated using the following formula:

Percent by mass = (Mass of water / Initial mass of hydrated) x 100%

Substituting the values we get:

Percent by mass = (5.73 g / 9.5 g) x 100% Percent by mass = 60.3%

Therefore, the percent by mass of water in the hydrated compound is 60.3%.

To know more about solution, visit:

https://brainly.com/question/7932885

#SPJ1

Answer:

ultraviolet, or UV rays from the sun can damage yor skin. thats why you put on sunscreen lol

Answer: ISOTOPES

Explanation:

isotopes are different types of the same element, this could be because they have an extra neutron, for example.

however, this does not apply to atoms that lose or gain electrons.

for example, Hydrogen has an isotope called Deuterium (or Hydrogen-2)  and Tritium (Hydrogen-3).

As electron orbital transition a produces light with a wavelength of 690 nm, the wavelength of the light produced by transition b is 1380 nm.

The energy of a photon is inversely proportional to its wavelength, so we can use the fact that transition b involves half the energy of transition a to determine the wavelength of the light it produces.

The energy of transition b is half that of transition a, so the wavelength of the light produced by transition b will be twice that of transition a. Therefore, the wavelength of the light produced by transition b is:

Wavelength b = 2 x Wavelength a

Wavelength b = 2 x 690 nm

Wavelength b = 1380 nm

So, the wavelength of the light produced by transition b is 1380 nm.

To know more about wavelengths, visit:https://brainly.com/question/13533093

#SPJ4