The ratio of the measures of the sides of a triangle is 4:5:5. If it's perimeter is 91 meterd, find each side length

The ratio of the volumes of the similar solids expressed in lowest terms is 64 : 27

From the question, we have the following parameters that can be used in our computation:

Two similar solids have a scale factor of 4:3

This means that

Ratio = 4 : 3

To calculate the ratio of their volumes expressed in lowest terms, we cube both sides of the expression

So, we have

Volume ratio = 64 : 27

Hence, the ratio of their volumes expressed in lowest terms is 64 : 27

Read more about scale factor at

https://brainly.com/question/29229124

#SPJ1

The weighted average rating for movie 3285 can be calculated by multiplying each rater's similarity with the given rating and then dividing the sum by the total sum of similarities.

In this case, we have two raters with similarity values of 15 and 30, respectively. For the first rater with an ID of 30, the similarity value is 15 and the given rating for movie 3285 is 7.0. Therefore, the contribution of this rater to the weighted average rating is (15 x 7.0) = 105.0.

For the second rater with an ID of 20, the similarity value is 30 and no rating is given for movie 3285. Therefore, the contribution of this rater to the weighted average rating is 0. The total sum of similarities is 15 + 30 = 45.0. Thus, the weighted average rating for movie 3285 is (105.0 + 0) / 45.0 = 2.33.

So, the weighted average rating for movie 3285 is 2.33. It's important to note that this calculation assumes that these are the only two raters who rated the movie, and that their similarity values accurately reflect their taste in movies.

we'll use the following formula: Weighted Average = (Rating1 * Similarity1 + Rating2 * Similarity2) / (Similarity1 + Similarity2), Plugging in the values: Weighted Average = (15 * 7.0 + 30 * 30.0) / (7.0 + 30.0)
Weighted Average = (105 + 900) / 37
Weighted Average = 1005 / 37
Weighted Average ≈ 27.16

So, the weighted average rating for the movie with ID 3285 is approximately 27.16.

To know more about value click here

brainly.com/question/30760879

#SPJ11

The error sum of squares is 0.32. So the answer is (B) 0.32.

The total sum of squares represents the variation in the dependent variable that can be explained by the independent variable(s) and the error term.

The regression sum of squares represents the variation in the dependent variable that can be explained by the independent variable(s) in the regression model.

The error sum of squares represents the variation in the dependent variable that cannot be explained by the independent variable(s) in the regression model and is often referred to as the residual variation.

The formula we can use is SSE = SST - SSR

Here we have

In a study where the least squares estimates were based on 34 sets of sample observations,

The total sum of squares SST = 4.53

The regression sum of squares SSR = 4.21

To find the error sum of squares, we use the formula:

=> SSE = SST - SSR

Plugging in the given values, we have:

=> SSE = SST - SSR = 4.53 - 4.21 = 0.32

Therefore,

The error sum of squares is 0.32. So the answer is (B) 0.32.

Learn more about Error sum at

https://brainly.com/question/30022853

#SPJ4

Complete Question:

In a study where the least squares estimates were based on 34 sets of sample observations, the total sum of squares and regression sum of squares were found to be: SST = 4.53 and SSR = 4.21. What is the error sum of squares?

Multiple Choice

A. 1.07   B. 0.32     C. 0.92   D. 8.74

After the new resident with an income of $2 million per year builds a mansion in the community, the median household income remains unchanged.

This is because the median household income is the middle value in a list of incomes, and the new resident's income is much higher than any of the other household incomes, so it does not affect the middle value.

However, the mean household income will increase significantly. The mean is the sum of all the incomes divided by the total number of households, and the new resident's income is much larger than any of the other households.

Therefore, when the new resident's income is added to the total income, the mean will increase significantly.

Before the new resident moved in, the total income for all eight households was $240,000 (4 households x $30,000 + 4 households x $40,000). After the new resident moves in, the total income becomes $2,240,000 ($240,000 + $2,000,000).

Dividing this by the total number of households (now nine, with the addition of the new resident) gives a new mean household income of approximately $248,888.

In conclusion, the median household income remains unchanged, while the mean household income increases significantly after the new resident with a high income moves in.

learn more about income here : brainly.in/question/15692103

The value of the z-score of the normally distributed scores is z = -0.2

Given data ,

To find the z-score of a person who scored 390 on the exam, we can use the formula for z-score:

z = (X - μ) / σ

where:

X = the score of the person = 390

μ = the mean of the distribution = 400

σ = the standard deviation of the distribution = 50

On simplifying , we get

z = (390 - 400) / 50

z = -10 / 50

z = -0.2

Hence , the z-score of a person who scored 390 on the exam is -0.2

To learn more about z-score click :

https://brainly.com/question/15016913

#SPJ1

Answer:75

Step-by-step explanation:

[tex]\frac{9}{12} =\frac{\frac{9}{3}}{\frac{12}{3} } =\frac{3}{4} \\and percentage is fraction*100\\\frac{3}{4}*100=75[/tex]

To prove that for some n > 0, xi > 0 for all i > n, we can use the fact that (xi) is a sequence that converges to x.

This means that given any ε > 0, there exists an N such that |xi - x| < ε for all i > N.  we can use the fact that (xi) is a sequence that converges to x.

Let's choose ε = x/2. Since x > 0, ε > 0 as well. Then there exists an N such that |xi - x| < ε = x/2 for all i > N. Rearranging this inequality, we get:

x - xi < x/2

xi > x/2

Since xi > x/2 and x > 0, we have shown that for some N > 0, xi > 0 for all i > N.

Learn more about Sequences

https://brainly.com/question/6561461

#SPJ4

The minimum amount of wrapping paper needed for the trapezoidal chocolate is 272 cm².

The minimum amount of wrapping paper that Maria will need to wrap the block of chocolate can be calculated as follows:

Therefore,

Surface area of the trapezoidal prism = (a + b)h + Lateral surface area

Lateral surface area = (a + b + c + d)l

Hence,

Lateral surface area = (5 + 11 + 5 + 5) 8

Lateral surface area = 26(8)

Lateral surface area = 208 cm²

Therefore,

Surface area of the trapezoidal prism = (5 + 11)4 + 208

Surface area of the trapezoidal prism = (16)4 + 208

Surface area of the trapezoidal prism = 64 + 208

Surface area of the trapezoidal prism = 272 cm²

learn more on prism here: https://brainly.com/question/27204575

#SPJ1

In a case whereby angela walked 12 mile. She took a break for water and then walked some more. In all, she walked 1110 miles then the distance that Angela walk after her break is 1098 miles

The distance that she walks initially = 12 mile

The total distance that she wlaked =1110 miles.

Then the distance she walked after the break =1110 miles -  12 mile

=1098 miles

Then we can come into conclusion that she was able to navigate 1098 miles after she rest during the break 1098 miles which implies that the distance she walked after the break was more.

Learn more about distance at:

https://brainly.com/question/26550516

#SPJ1

Exponential growth that shows greater increases with passing time, creating the curve of an exponential function and Arithmetic growth takes place when a constant is being added such that the amount of addition remains constant.

The amounts added grow by a fixed rate of growth, expressed in percentages. Due to the fact that these remain constant while the amounts added rise, growth is then typically measured in doubling times.

Due to the fact that all populations of organisms have the potential to experience exponential growth, the concept of exponential growth is particularly intriguing in the field of population biology.

Learn more about Exponential and Arithmetic Growth at:

https://brainly.com/question/30168786

#SPJ4

The value of x is 7[tex]\sqrt{3}[/tex] inches

The correct answer is an option (d)

Let us assume that in the attached diagram of right triangle the angle A measures 30 degrees.

Here, the hypotenuse measures 7 in.

We know that in right triangle, the tangent of angle θ is nothing but the ratio of opposite side of angle θ to the adjacent side of angle θ.

Consider the tan of angle A

tan(A) = opposite side of angle A / adjacent side of angle A

tan(30°) =  7 / x

We know that from the standard trigonometric table the value of tan(30°) is [tex]\frac{1}{\sqrt{3} }[/tex]

Substitute this value in above equation we get,

[tex]\frac{1}{\sqrt{3} }[/tex] =  7/x

We solve this equation to find the value of x.

x = 7 × [tex]\sqrt{3}[/tex]

x = 7[tex]\sqrt{3}[/tex] in.

Therefore, the correct answer is an option (d)

Learn more about the tan of angle here:

https://brainly.com/question/12865818

#SPJ1

it is important to keep in mind that the results of a polygraph test should not be taken as absolute proof of deception or truthfulness, and that other factors should also be considered in evaluating a job applicant

While lie-detector tests (also known as polygraph tests) are sometimes used as part of a job application process, their reliability and accuracy are controversial and have been questioned by many experts in the field. The test measures physiological responses such as heart rate, blood pressure, and sweat gland activity in response to questions, and the results are interpreted by a trained examiner to determine whether the person is being truthful or deceptive.

However, there are several factors that can affect the results of a polygraph test, including the person's physiological state (such as anxiety or stress), the wording and interpretation of the questions, and the skills and biases of the examiner. False positives (indicating deception when the person is actually telling the truth) and false negatives (indicating truthfulness when the person is actually lying) are also possible.

In your case, it is possible that the lie-detector test gave a false positive result, indicating deception when you were actually telling the truth. There could be various reasons for this, such as anxiety or stress during the test, a misunderstanding or misinterpretation of the questions, or an error in the administration or interpretation of the test.

To learn more about physiological visit:

brainly.com/question/31483930

#SPJ11

Answer:

[tex]x \approx 60.4[/tex]

Step-by-step explanation:

We can solve for x using the trigonometric ratio cosine:

[tex]\cos(\theta) = \dfrac{\text{adjacent}}{\text{hypotenuse}}[/tex]

↓ plugging in the given values

[tex]\cos(22\°) = \dfrac{56}{x}[/tex]

↓ taking the reciprocal of (flipping) both sides

[tex]\dfrac{1}{\cos(22\°)} = \dfrac{x}{56}[/tex]

↓ multiplying both sides by 56

[tex]\dfrac{56}{\cos(22\°)} = x[/tex]

↓ plugging into a calculator

[tex]\boxed{x \approx 60.4}[/tex]

Bayes' Theorem is a mathematical theorem that enables the revision of prior probabilities based on new information or evidence.

This theorem is widely used in statistics, machine learning, and other fields that deal with uncertainty and probabilistic reasoning. Contrary to the first option mentioned in the question,

Bayes' Theorem can be used when conditional probabilities are known, and it enables the calculation of posterior probabilities, which is the probability of a hypothesis or event given the available evidence.

Therefore, the third option is correct; Bayes' Theorem enables the use of sample information to revise prior probabilities. This theorem is highly valuable because it allows the integration of new data or knowledge into the decision-making process,

which can lead to more accurate predictions and better-informed decisions. In summary, Bayes' Theorem is a powerful tool that requires knowledge of probabilities and enables the calculation of posterior probabilities based on new evidence or information.

By combining prior probabilities with likelihoods (based on new data), we can calculate posterior probabilities, which represent our updated knowledge.

This process is crucial in making informed decisions in various fields, such as data science, finance, and medical diagnosis.

To know more about theorem click here

brainly.com/question/30242664

#SPJ11

P(X > 20) has a rounded value of 0.0475.

By dividing the sum of the given numbers by the entire number of numbers, the mean—the average of the given numbers—is determined.

To find P(X > 20), where X is a normal random variable with mean μ = 15 seconds and standard deviation σ = 3 seconds, we need to standardize the variable and use the standard normal distribution.

Let Z be a standard normal random variable, then we can standardize X as follows:

Z = (X - μ) / σ = (20 - 15) / 3 = 1.67

Using a standard normal table or calculator, we can find the probability:

P(Z > 1.67) = 0.0475 (rounded to four decimal places)

Therefore, P(X > 20) has a rounded value of 0.0475.

Learn more about mean on:

https://brainly.com/question/14532771

#SPJ4

1.Communism is a political and economic theory that advocates for a society where all property and resources are owned and controlled by the community, without social classes. The theory proposes that the state or community should control the means of production, and individuals should work for the benefit of society, rather than their own gain.

2.Capitalism is an economic and political theory that emphasizes private ownership of the means of production, with wealth being accumulated through free markets and competition. The theory holds that individuals should be free to pursue their own economic interests, while the government's role is limited to protecting property rights and ensuring market efficiency.

3.The proletariat refers to the working class in Marxist theory, who do not own the means of production and must sell their labor to survive. The proletariat is said to be exploited by the bourgeoisie, who extract surplus value from their labor.

4.The bourgeoisie refers to the capitalist class in Marxist theory, who own the means of production and extract surplus value from the labor of the proletariat. The bourgeoisie are motivated by profit, and their accumulation of wealth comes at the expense of the working class.

5.Famine is a situation in which a large number of people are unable to access enough food to meet their basic nutritional needs. Drought, war, government policies, and economic instability are some factors that can contribute to famine.

6.A dictatorship is a form of government in which a single individual or small group holds absolute power, often through the use of force and repression. Dictatorships are characterized by the absence of political freedom and civil liberties, and the subjugation of the populace to the will of the dictator or ruling clique.

7.Ideology refers to a set of beliefs, values, and assumptions that shape an individual's worldview and guide their actions and decisions. Ideologies can take many different forms, from religious and philosophical systems to political and economic theories.

8.In economics, demand refers to the quantity of a good or service that consumers are willing and able to purchase at a given price. The law of demand states that as the price of a good or service increases, the quantity demanded decreases, and vice versa.

9.Overproduction is a situation in which producers manufacture or produce more goods or services than can be consumed or sold in the market. Overproduction can lead to a surplus of goods, which can depress prices and lead to economic downturns.

10.Shareholders are individuals or entities that own shares in a company, entitling them to a portion of the company's profits and a say in its management. Shareholders can exercise their ownership rights through voting on important company decisions and receiving dividends on their investments.

To know more about Social Science here

https://brainly.com/question/17560563

#SPJ4

The measure of angle ITE is 44 degrees. In a kite, the diagonals intersect at a right angle and bisect each other. Let's label the points in the kite as follows:

Point P is the intersection of the diagonals.

Point K is at one end of the kite.

Point E is at the other end of the kite, opposite to point K.

Point I is between points K and P.

Point T is between points E and P.

Since the diagonals bisect each other, we know that IP = KP and EP = TP. Let's use this fact to find the measure of angle ITP, which is equal to ITE:

We know that angle KIP = 46 degrees.

Since IP = KP, angle KIP is isosceles, so angle KPI is also 46 degrees.

Similarly, since KEP = 34 degrees, we know that angle KPE is also 34 degrees.

Since EP = TP, angle EPT is also 34 degrees.

We also know that angles KPI and EPT add up to 90 degrees, since they are complementary angles formed by the intersection of perpendicular lines.

Therefore, angle IPT is 90 - 46 = 44 degrees.

Since IP = TP, angles ITP and IPT are congruent, so angle ITP is also 44 degrees.

Therefore, the measure of angle ITE is 44 degrees.

Learn more about Diagonals intersect

https://brainly.com/question/18983839

#SPJ4

The null hypothesis for an ANOVA test is that all population means are equal, and the alternative hypothesis is that at least one mean is different from the others.

The p-value for the F-test in this case is 0.064, which is greater than the 5% significance level. Therefore, we fail to reject the null hypothesis and conclude that there is not enough evidence to suggest that the mean sulfur dioxide concentrations for the three cities are different.

In other words, it appears that the mean concentration levels are approximately the same for the three city populations.

Therefore, the correct conclusion is that "It appears that the mean concentration levels are approximately the same for the three city populations."

To know more about population mean click on below link :

https://brainly.com/question/30727743#

#SPJ11

Since the culture is observed to double every 6 hours, we know that the growth rate is constant at r = ln(2)/6 per hour.

To calculate growth rates, divide the difference between the starting and ending values for the period under study by the starting value. The most frequent time intervals for growth rates are annually, quarterly, monthly, and weekly.

We can use the formula for exponential growth to model the number of bacteria in the culture after t hours:

n(t) = n0e^(rt)where n0 is the initial number of bacteria.

Substituting in the values given in the problem, we get:

n(t) = 25e^[(ln(2)/6)t]Simplifying this expression using the properties of logarithms, we can rewrite it in the form:

n(t) = 25(2)^(t/6)This is the exponential model for the number of bacteria in the culture after t hours.

To know more about  growth rate visit:

https://brainly.com/question/23879811

#SPJ4

The exponential model for population of bacteria, [tex]n(t) = n_0{2}^{\frac{t}{a} }[/tex] can be written [tex]n(t) = 25 \times {2}^{\frac{t}{6} }[/tex] for the number of bacteria in the culture after t hours. The estimate number of bacteria after 13 hours is equals to the 112. In 92 hours, the bacteria count will reach to 1 million.

We have a certain culture of the bacterium Rhodobacter.

Initial population, n₀ = 25

The population become doubles in every 6 months. The exponential model

[tex]n(t) = n_0{2}^{\frac{t}{a} }[/tex] for the number of bacteria in the culture after t hours. Now, the population become double in 6 hours, so a = 6 , then exponential equation is [tex]n(t) = 25 \times {2}^{\frac{t}{6} }[/tex].

We have to estimate the number of bacteria after 13 hours. That is t = 13 hours, [tex]n( t) = 25( 2)^{\frac{t}{6}}[/tex]

Substitute t = 13 hours

[tex] = 25( 2)^{\frac{13}{6}}[/tex]

[tex]= 25( 2)^{2.16}[/tex]

= 111.728713807 ~ 112

So, n(13) = 112

We have to determine the value of t in hours for n(t) = 1 million = 1000000, using the above equation, [tex]1000000 = 25( 2)^{\frac{t}{6}}[/tex]

[tex]40000 = ( 2)^{\frac{t}{6}}[/tex]

Taking natural logarithm both sides

=>[tex] ln( 40000) = ln(( 2)^{\frac{t}{6}})[/tex]

=> [tex]ln(40000) = \frac{t}{6} ln(2)[/tex]

=> [tex]t = \frac{6 ln( 40000)}{ ln(2)}[/tex]

= 91.7262742773 ~ 92

Hence, required value is 92 hours..

For more information about exponential model, visit:

https://brainly.com/question/29527768

#SPJ4

81.06% of people in the 25-34 age group spend less than $2,500 on reading and entertainment per year.

To find the z-score for a person who spends $2,500 on reading and entertainment in the 25-34 age group, we can use the formula:

[tex]z = \frac{(x - μ) }{σ} [/tex]

Where: x = $2,500 μ = $2,080 σ = $480 Substituting these values, we get:

[tex]z = \frac{ (2500 - 2080)}{ 48} \\ z = 0.88[/tex]

This means that a person who spends 2,500 on reading and entertainment is 0.88 standard deviations above the mean. To find the proportion of people who spend less than 2,500 on reading and entertainment, we can use a standard normal table or calculator to find the area to the left of z = 0.88. The area is 0.8106. Therefore, approximately 81.06% of people in the 25-34 age group spend less than $2,500 on reading and entertainment per year.

Learn more about standard deviations here,

https://brainly.com/question/31616931

#SPJ4

The expected number of people who will drop out due to either relapse or moving away is 10 + 6 = 16. However, taking into account the standard deviations, it is 16 +/- 5.

To find the expected number of people who will drop out due to either relapse or moving away, we need to add the expected number of people who will drop out due to relapse (10) and the expected number of people who will drop out due to moving away (6).

Expected number of people who will drop out due to either relapse or moving away = 10 + 6 = 16.

However, we also need to take into account the standard deviations for each of these groups. To do this, we can use the square root of the sum of the variances (SD squared) for each group, squared.

Variances:
- Relapse: 4 squared = 16
- Moving away: 3 squared = 9

Square root of the sum of the variances:
- sqrt(16 + 9) = 5

Therefore, the expected number of people who will drop out due to either relapse or moving away, taking into account the standard deviations, is 16 +/- 5.

This means that we can expect anywhere between 11 and 21 people to drop out due to either relapse or moving away during the two-year cohort study.

More on standard deviation: https://brainly.com/question/8889532

#SPJ11

The total cost for both the truck driver and the engineer this week is $4,320.

To solve this problem, we first need to determine how many hours the truck driver worked this week. We can do this by dividing the weekly earnings of the truck driver by their hourly rate of $40:

1440 / 40 = 36 hours

Therefore, the truck driver worked for 36 hours this week.

Now, we need to determine the total earnings of the engineer for the same number of hours. We know that the engineer earns $80 per hour, so for 36 hours of work, they will earn:

80 x 36 = $2,880

Therefore, the total cost for both the truck driver and the engineer this week will be the sum of their earnings:

1440 (truck driver) + 2880 (engineer) = $4,320

To know more about total here

https://brainly.com/question/14286201

#SPJ4

Complete Question:

A truck driver earns $40 per hour, and an engineer earns $80 per hour. If the truck driver made 1,440 this week, then the total cost does he made is?

A company seeking to estimate the time required to produce 100 units of a product based on past production rates should utilize regression analysis. This statistical method is the most effective among the given choices because it focuses on identifying the relationship between variables, such as production rates and time, and uses this relationship to make predictions.

Regression analysis will enable the company to develop a model that quantifies the relationship between the production rates (independent variable) and the time taken to produce units (dependent variable). By analyzing historical data, the company can establish a mathematical equation to predict future production times based on the past performance.

Hypothesis testing and confidence intervals are less suited for this purpose, as they primarily focus on determining the significance of relationships or differences between groups rather than predicting future outcomes. Similarly, correlation analysis measures the strength of a relationship between variables but does not predict future values based on past data.

In summary, regression analysis is the most effective statistical method for a company to estimate the time required to produce 100 units of a product based on past production rates. This method enables the company to create a predictive model, which can help optimize production processes and enhance overall efficiency.

To know more about hypothesis testing visit:

https://brainly.com/question/30588452

#SPJ11

The sampling method is not specified. The probability a customer spends less than $14 each visit is approximately 0.8413. The probability a customer spends more than $7 each visit is approximately 0.9082. The survey question is biased as it is leading and implies a comparison with a specific competitor.

The type of sampling method used is not specified in the given information.

Using the standard normal distribution, the probability that a customer spends less than $14 can be found as

P(X < 14) = P(Z < (14-11)/3) = P(Z < 1) = 0.8413

Therefore, the probability that a customer spends less than $14 each visit is 0.8413.

Similarly, the probability that a customer spends more than $7 can be found as

P(X > 7) = P(Z > (7-11)/3) = P(Z > -1.33) = 0.9082

Therefore, the probability that a customer spends more than $7 each visit is 0.9082.

The survey question "How does our food compare to PhillyBurger?" may be biased because it suggests a comparison between two specific brands, which may influence the customer's response. A more neutral question would be "How do you rate the quality of our food?"

To know more about Probability:

https://brainly.com/question/11234923

#SPJ4

It depends on which edge and by how much you are raising the weight in the minimum spanning tree.

Consider the following example to gain a better understanding of this idea. Let T be the smallest spanning tree of G and let G be a connected, weighted graph. Consider increasing an edge's weight in T by a tiny positive amount.

T continues to be a spanning tree of G if is small enough because it is still connected and contains all of G's vertices. However, T is no longer a minimum spanning tree of G because its weight has increased by. Consider any alternative spanning tree T' of G to understand why. We know that the weight of T is less than or equal to the weight of T' because T was the lowest spanning tree prior to the weight increase.

T' is now a better minimal spanning tree than T since, after the weight increase, the weight of T is greater than the weight of T' plus. T' must be the new minimal spanning tree of G as a result.

In conclusion, altering the weight of an edge in a minimum spanning tree may result in the inclusion of a different set of edges, which may result in a change in the tree's structure. The new minimal spanning tree might, however, nevertheless have the same edges as the previous minimum spanning tree if the weight gain is negligibly tiny.

To know more about MST Edge Weight Change visit:

https://brainly.com/question/30010373

#SPJ4

The value of x is x= ± 2√5 (option a).

To solve this equation, we need to isolate x on one side of the equation. We can do this by taking the square root of both sides of the equation. However, we need to keep in mind that when we take the square root of a number, there are always two possible solutions, one positive and one negative.

So, taking the square root of both sides of x² = 20, we get:

x = ± √20

Simplifying √20, we get:

x = ± √(4 × 5)

Using the property of square roots that √(a × b) = √a × √b, we can simplify further to get:

x = ± 2√5

Therefore, the two solutions to the equation x² = 20 are x = 2√5 and x = -2√5.

However, we also need to check if any of these solutions make sense in the context of the problem. In this case, we are looking for the value of x, which is a measure of length, so we can discard the negative solution since lengths cannot be negative.

Therefore, the only valid solution is x = 2√5.

Hence the correct option is (a).

To know more about equation here

https://brainly.com/question/10413253

#SPJ4

Our assumption that AC ≤ BC must be false.  To prove that the hypotenuse is the longest side of a right triangle, we will use an indirect proof. We will assume the opposite of what we want to prove and show that it leads to a contradiction.

Assume that AC ≤ BC. This means that the side opposite the acute angle A is shorter than the side opposite the acute angle C.

Now, let's draw a line segment from vertex C perpendicular to AB. This line segment divides the triangle into two smaller triangles, let's call them ΔACD and ΔBCD.

Since the line segment is perpendicular to AB, angle ACD and angle BCD are both right angles. And since angle A is acute, angle ACB must be acute as well.

Now, using the Pythagorean theorem, we can write:
AC² = AD² + CD²
BC² = BD² + CD²

Since AD < BD (because AC ≤ BC), we can substitute BD - AD for BD in the second equation:
BC² = (BD - AD)² + CD²
BC² = BD² - 2AD·BD + AD² + CD²

But now we have a contradiction:
AC² = AD² + CD² < BC² = BD² - 2AD·BD + AD² + CD²

If we simplify the inequality, we get:
0 < BD² - AC² - 2AD·BD

But this cannot be true, because all the terms on the right-hand side are positive (BD > AD, AC < BC, and both sides are squares). Therefore, our assumption that AC ≤ BC must be false.

We have proven that the hypotenuse is the longest side of a right triangle.

learn more about hypotenuse here: brainly.com/question/30389960

#SPJ11

The derivative of F(x) is [tex]F'(x) = x^{(1/3)[/tex].

A relation between a collection of inputs and outputs is known as a function. A function is, to put it simply, a relationship between inputs in which each input is connected to precisely one output.

To find the derivative of the given function F(x), we will apply the fundamental theorem of calculus and differentiate the integral with respect to x.

Let's compute F'(x):

F(x) = ∫[0 to x] [tex]t^{(1/3)} dt[/tex]

To differentiate the integral with respect to x, we'll use the Leibniz integral rule:

F'(x) = d/dx ∫[0 to x] [tex]t^{(1/3)} dt[/tex]

According to the Leibniz integral rule, we have to apply the chain rule to the upper limit of the integral.

[tex]F'(x) = x^{(1/3)} d(x)/dx - 0^{(1/3)} d(0)/dx[/tex]   [applying the chain rule to the upper limit]

Since the upper limit of the integral is x, the derivative of x with respect to x is 1, and the derivative of 0 with respect to x is 0.

[tex]F'(x) = x^{(1/3)} (1) - 0^{(1/3)} (0)[/tex]

[tex]F'(x) = x^{(1/3)[/tex]

Therefore, the derivative of F(x) is [tex]F'(x) = x^{(1/3)[/tex].

Learn more about function on:

https://brainly.com/question/7693326

#SPJ4

The following triangle is b) right.

To determine whether the triangle is acute, right, or obtuse, we can use the Pythagorean theorem, which states that in a right triangle, the sum of the squares of the two shorter sides (legs) is equal to the square of the longest side (hypotenuse). If this is not true, then the triangle is either acute or obtuse.

In this case, we have:

a = 7 ft

b = 11 ft

c = √170 ft

We can first check whether this is a valid triangle by verifying that the sum of the lengths of any two sides is greater than the length of the third side. In this case, we have:

a + b > c

7 + 11 > √170

18 > √170

This inequality is true, so we know that the given side lengths can form a triangle.

Next, we can use the Pythagorean theorem to check whether the triangle is right. If we square each of the two shorter sides and add the results, we get:

[tex]a^{2}[/tex] + [tex]b^{2}[/tex] = [tex]7^{2}[/tex] + [tex]11^{2}[/tex] = 170

Then, we can compare this to the square of the longest side, which is:

[tex]c^{2}[/tex] = [tex](\sqrt{170} )^{2}[/tex] = 170

Since [tex]a^{2}[/tex] + [tex]b^{2}[/tex] = [tex]c^{2}[/tex], we have a right triangle.

Therefore, the answer is (b) right.

To learn more about triangle here:

https://brainly.com/question/6322314

#SPJ1