the reaction between no and h2o produces nh3 and o2: 4 no 6 h2o 4 nh3 5 o2 if the reaction of 60 g of no with 56 g of h2o produces 34 g of ammonia (nh3). what will be the limiting reactant of this reaction?

R, the gas constant is equal to these three values, volume, temperature, pressure and number of moles.

Depending on the other units used in the equation, different units are used for the gas constant. The Gas Constant's Value The units used for pressure, volume, and temperature have an impact on the value of the gas constant "R". These were typical gas constant values prior to 2019. R = 8.3145 J/mol K R = 8.2057 m 3 atm/mol K R = 0.0821 litre atm/mol K. Work per degree every mole is what R means physically. Any system of units for measuring labour or energy, such as joules, or for measuring temperature at an absolute scale, like as kelvin or rankine, may be used to express it.

To know more about gas constant, here:

https://brainly.com/question/14279790

#SPJ1

The indicators used in the titration of a strong acid and a strong base are phenolphthalein and methyl orange. Option A and B.

Phenolphthalein changes color from colorless to pink at a pH of around 8.2-10.0, which is the endpoint of the titration of a strong base with a strong acid. On the other hand, methyl orange changes color from red to yellow at a pH of around 3.1-4.4, which is the endpoint of the titration of a strong acid with a strong base.

Alizarin yellow and red litmus are not commonly used as indicators in this type of titration. The choice of indicator depends on the type of acid and base being titrated, as well as the desired accuracy and precision of the results. The answers are options A and B.

More on indicators: https://brainly.com/question/30038798

#SPJ11

There are 0.0488 moles of ammonia (NH3) present after the reaction.

To determine the moles of ammonia (NH3) produced after the reaction, we start by calculating the moles of H2 and N2 present initially.

Using the ideal gas law, we can calculate the moles of H2 by dividing the product of the pressure and volume of Bulb 1 by the gas constant and temperature.

This gives us 0.0732 moles of H2. Similarly, for N2, we find 0.2476 moles using the same calculation.

Since the stoichiometric ratio between H2 and NH3 is 3:2, we compare the moles of H2 and N2 to determine the limiting reagent. In this case, H2 is the limiting reagent.

Finally, we calculate the moles of NH3 produced by multiplying the moles of H2 by the ratio of NH3 to H2, which gives us 0.0488 moles of NH3.

Therefore, after the completion of the reaction, there are 0.0488 moles of ammonia present.

learn more about celsius

brainly.com/question/1373930

#SPJ11

The molar concentration of Cl- in the unknown solution is 1.31 M.

Since the Ag/AgCl electrode is in equilibrium with the solution, the electrode potential can be used to determine the concentration of Cl- ions in the unknown solution. The standard electrode potential for the Ag/AgCl electrode is +0.222 V at 25 °C. At equilibrium, the electrode potential is equal to the potential of the half-reaction:

AgCl(s) + e- → Ag(s) + Cl-

The electrode potential can be expressed as:

Ecell = E°cell - (RT/nF) ln Q

where E°cell is the standard electrode potential, R is the gas constant, T is the temperature in kelvin, n is the number of electrons transferred, F is Faraday's constant, and Q is the reaction quotient.

For the half-reaction shown above, n = 1. At equilibrium, Q = [Ag+][Cl-]/[AgCl]. Since the Ag/AgCl electrode is a solid, its activity is considered to be 1. Therefore, Q = [Cl-].

Substituting the values into the equation, we get:

Ecell = 0.222 V - (0.0257 V/K)(298 K)/(1 mol/96485 C/mol) ln [Cl-]

Solving for [Cl-], we get [Cl-] = 1.31 M. Therefore, the molar concentration of Cl- in the unknown solution is 1.31 M.

Learn more about electrode here:

https://brainly.com/question/31642782

#SPJ11

Due to a number of variables, Venus's atmosphere contains substantially more carbon dioxide than Earth does.

First, Venus experienced a runaway greenhouse effect, in which higher [tex]CO_2[/tex] concentrations caused higher temperatures, which in turn released more [tex]CO_2[/tex] from the planet's surface. The greenhouse impact was further exacerbated by this positive feedback loop. Second, unlike Earth, Venus does not have a robust carbon cycle that controls carbon dioxide levels through mechanisms like photosynthesis and the breakdown of [tex]CO_2[/tex] in seas. Carbon dioxide is a gas that is taken up by plants on Earth and transformed into organic matter. It is also dissolved in the oceans. Additionally, the absence of plate tectonics on Venus prohibits carbon dioxide from being recycled back into the planet's interior.

To know more about carbon cycle, here

brainly.com/question/30633292

#SPJ4

--The complete Question is, Why does Venus's atmosphere have much more carbon dioxide than Earth's atmosphere? --

The empirical formula of the compound made up of 70.0% iron and 30.1% oxygen is Fe₂O₃, and the molecular formula can be the same as the empirical formula, Fe₂O₃.

To determine the empirical formula, we need to find the simplest whole-number ratio of the elements present in the compound. Given the percentages of iron (Fe) and oxygen (O), we can assume a 100 g sample of the compound.

The mass of iron is 70.0 g (70.0% of 100 g), and the mass of oxygen is 30.1 g (30.1% of 100 g).

Next, we calculate the moles of each element using their respective molar masses:

moles of Fe = 70.0 g / 55.85 g/mol ≈ 1.252

moles of O = 30.1 g / 16.00 g/mol ≈ 1.881

Then, we divide the number of moles of each element by the smallest number of moles to obtain the simplest whole-number ratio:

1.252 / 1.252 ≈ 1 (for Fe)

1.881 / 1.252 ≈ 1.5 (for O)

Since we need to express the empirical formula using whole numbers, we multiply the ratio by 2 to obtain the simplest ratio:

1 × 2 = 2 (for Fe)

1.5 × 2 = 3 (for O)

Therefore, the empirical formula of the compound is Fe₂O₃, and the molecular formula can be the same as the empirical formula, Fe₂O₃.

To learn more about empirical formula, here

https://brainly.com/question/32125056

#SPJ4

The term "pyo-" (py/o/rrhea; pyo/genic) means "pus" or "related to pus."

The prefix "pyo-" is derived from the Greek word "pyon," which means pus. When used as a prefix in medical terminology, "pyo-" indicates a condition or process related to pus or the presence of pus.

For example, "pyorrhea" refers to a condition characterized by the discharge of pus from a wound or an infection of the gums. In this case, the term combines "pyo-" (meaning pus) and "-rrhea" (meaning discharge or flow).

Similarly, "pyogenic" refers to something that causes or is related to the production of pus. It is often used to describe bacteria or microorganisms that can lead to the formation of pus in infected tissues.

In summary, the prefix "pyo-" in medical terminology denotes pus or the involvement of pus in a specific condition, indicating a discharge, infection, or pus-forming process.

To know more about microorganisms, refer here:

https://brainly.com/question/9004624#

#SPJ4

For an O-H bond has a length of 9.6 x 10⁻¹¹ nm, the approximate size of a water molecule, H₂O is D) 3 x 10⁻¹⁰ nm.

The approximate size of a water molecule, H₂O, can be estimated by adding the length of two O-H bonds and the diameter of an oxygen atom.

2(O-H bond length) + oxygen atom diameter = 2(9.6 x 10⁻¹¹ nm) + 1.52 x 10⁻¹⁰ nm ≈ 2.88 x 10⁻¹⁰ nm

Therefore, the approximate size of a water molecule, H₂O, is D) 3 x 10⁻¹⁰ nm.

Find out more on bonds here: https://brainly.com/question/29282058

#SPJ1

The mass of sodium hydroxide produced is 39.58g.

Percent yield is the percent ratio of actual yield to the theoretical yield. It is calculated to be the experimental yield divided by theoretical yield multiplied by 100%. If the actual and theoretical yield ​are the same, the percent yield is 100%

In chemistry, yield is a measure of the quantity of moles of a product formed in relation to the reactant consumed, obtained in a chemical reaction, usually expressed as a percentage.

Given,

moles of sodium oxide = 0.532 moles

From the reaction,

Na₂O + H₂O = 2NaOH

1 mole of sodium oxide gives 2 moles of NaOH

so, 0.532 moles will give 1.064 moles of NaOH

Mass of NaOH = 1.064 × 40 = 42.56g

Theoretical yield = 42.56g

Percentage yield = 93%

Actual yield = (93 × 42.56) ÷ 100

= 39.58g

Learn more about percent yield, here:

https://brainly.com/question/17042787

#SPJ1

Based on the given compound formula Al2X3, the most likely element for X is: D. Cl. The compound with the formula Al2X3 suggests that there are two aluminum atoms and three atoms of a particular element represented by "X".

To determine which element "X" could be, we need to consider the valency of aluminum and the other elements. Aluminum has a valency of +3, which means it can bond with three other atoms to complete its valence shell. Among the given options, sulfur (S) and chlorine (Cl) have a valency of -2, while phosphorus (P) and hydrogen (H) have a valency of -3 and +1, respectively.

Therefore, the correct answer would be D. Cl, as it can form a compound with Al in the ratio of 2:3 by gaining three electrons to attain a noble gas configuration. The compound would be Al2Cl3, which is aluminum chloride, a well-known and stable compound. The other options (A. P, B. S, C. H) do not form stable compounds with aluminum in a 2:3 ratio.

To know about aluminum:

https://brainly.com/question/28989771

#SPJ11

The optimum temperature of 37°C is ideal for restriction enzymes because it closely resembles the normal body temperature of the organisms they are derived from, ensuring optimal enzyme activity.


Restriction enzymes are proteins that function to cut DNA at specific sequences. Most restriction enzymes are isolated from bacteria, and the typical body temperature for many bacteria and other organisms, including humans, is around 37°C. Since enzymes have evolved to function best within the natural environment of their source organisms, 37°C is the temperature at which they can maintain their optimal structure and function.

At lower temperatures, enzyme activity may decrease, and at higher temperatures, the enzymes may become denatured and lose their function. Therefore, maintaining a 37°C environment ensures the restriction enzymes are working efficiently and effectively for their intended purpose.

Learn more about enzyme here:

https://brainly.com/question/14953274

#SPJ11

The formula masses of water, propene, and 2-propanol are 18.015 g/mol, 42.081 g/mol, and 60.096 g/mol, respectively.

The formula mass, also known as the molecular weight, is the sum of the atomic masses of all the atoms in a molecule. For water, H2O, the formula mass would be 2(1.008) + 1(15.999) = 18.015 g/mol. For propene, C3H6, the formula mass would be 3(12.011) + 6(1.008) = 42.081 g/mol. Finally, for 2-propanol, C3H8O, the formula mass would be 3(12.011) + 8(1.008) + 1(15.999) = 60.096 g/mol. In conclusion, It is important to know the formula mass as it can be used to determine the amount of substance in a given sample using Avogadro's number and the mass of the sample.

To know more about formula masses visit:

brainly.com/question/28647347?referrer=searchResults

#SPJ11

The molar mass of the gas at 125°C is approximately 43.4 g/mol. Therefore, the correct answer is not listed as an option.

We need to use the ideal gas law, PV = nRT, to solve for the number of moles of gas present:

n = (PV) / RT

At STP, P = 1 atm and T = 273 K, so:

n = (1 atm * 10.0 L) / (0.0821 L atm/mol K * 273 K) = 0.412 mol

Now, we can use the formula for molar mass, M = m / n, where m is the mass of the gas:

M = 17.90 g / 0.412 mol = 43.4 g/mol

So the molar mass of the gas at 125°C is approximately 43.4 g/mol

Therefore, the correct answer is not listed as an option.

Learn more about molar mass  here:

https://brainly.com/question/31545539

#SPJ11

The maximum number of grams of [tex]PH_3[/tex] that can be formed when 43.00 g of phosphorous react with excess hydrogen to form [tex]PH_3[/tex] in [tex]P_4(g) + 6H_2(g) --- > 4PH_3(g)[/tex]  is 179.42 g.

We must use stoichiometry to estimate the molar mass of phosphine       ([tex]PH_3[/tex]) in order to compute the maximum amount of grammes of [tex]PH_3[/tex] that can be produced.

Let's begin by figuring out the molar mass of phosphorus ([tex]P[/tex]):

P has a molar mass of 31.00 g/mol.

Next, we can apply the balanced equation's calculated molar ratio of phosphorus ([tex]P_4[/tex]) to phosphine ([tex]PH_3[/tex]):

1 mol P4 interacts to create 4 mol [tex]PH_3[/tex].

Let's now determine how many moles of phosphorus ([tex]P_4[/tex]) there are:

The formula for calculating the number of moles of [tex]P_4[/tex] is:

mass of [tex]P_4[/tex] / molar mass of [tex]P_4[/tex]= 43.00 g / 31.00 g/mol = 1.38 mol (rounded to two decimal places).

We can determine the number of moles of phosphine ([tex]PH_3[/tex]) produced using the molar ratio:

The formula for the number of moles of [tex]PH_3[/tex]:

4 mol [tex]PH_3[/tex]/mol P4 * 1.387 mol [tex]P_4[/tex] = 5.54 mol (rounded to two decimal places)

Finally, we can figure out how much [tex]PH_3[/tex] weighs:

To the nearest two decimal places, the mass of [tex]PH_3[/tex] is calculated as follows:

5.548 moles * (31.00 g/mol + 3 * 1.01 g/mol) = 179.42 g.

Therefore, when 43.00 g of phosphorus combines with too much hydrogen, the most [tex]PH_3[/tex] that may be produced is 179.42 g.

To know more about grams of [tex]PH_3[/tex] using given balance equation

brainly.com/question/30877951

If it decays in the lungs, it produces an alpha particle and an atom of a radioactive solid.

Radon is a colorless, odorless, and tasteless radioactive gas that is formed naturally from the decay of uranium and thorium. When radon is inhaled, it can decay in the lungs and release alpha particles, which are highly ionizing and can damage lung tissue. This damage can increase the risk of developing lung cancer, particularly in individuals who are exposed to high levels of radon over a long period of time. Therefore, radon is considered dangerous and is classified as a carcinogen by the World Health Organization (WHO) and the Environmental Protection Agency.

To know more about Protection visit :

https://brainly.com/question/23421785

#SPJ11

When a small amount of HCl is added to a solution containing fluoride ions (F−) and hydrogen fluoride (HF), the following change will occur:

c. The concentration of hydrogen fluoride will decrease and the concentration of fluoride ions will increase.

This is because the HCl will react with the HF to form H
3
O
+
and F
−
, according to the following equation:

HCl + HF → H
3
O
+
+ F
−

This reaction is an example of an acid-base reaction, where HCl acts as the acid and HF acts as the base. The result is that the concentration of HF will decrease, since it is being used up in the reaction, while the concentration of F−
will increase, since it is being produced.

Fluoride ions are negatively charged atoms of the element fluorine (F), which have gained one electron to achieve a stable electron configuration. Fluoride ions are highly reactive and are found in many minerals, as well as in seawater and some freshwater sources.

Fluoride ions are widely used in dental products such as toothpaste, mouthwash, and professional fluoride treatments because they can help prevent tooth decay. Fluoride ions work by strengthening tooth enamel, which is the hard outer layer of the teeth that protects against decay.

Visit here to learn more about fluoride ions brainly.com/question/10916463

#SPJ11

³⁸₁₈Ar nucleus completes the given equation, hence option D is correct.

The equation provided illustrates how an unstable chlorine isotope breaks down into a beta particle and an argon nucleus. To create an Argon nucleus that is more stable, the nucleus emits a beta particle.

Stable isotopes and supposedly unstable or radioactive isotopes are the two categories into which isotopes fall in science. These last ones are stable and don't produce radioactive radiation.

While Xenon and other isotopes are known to be stable, Xenon-124 and Xenon-136 deteriorate over the course of several trillion years.

Learn more about nucleus, here:

https://brainly.com/question/18852772

#SPJ1

Answer:

some of the questions are to be asked and answered scientifically because:

1.scientific method is less biased

Answer:

The first step of the scientific method is the "Question." This step may also be referred to as the "Problem." Your question should be worded so that it can be answered through experimentation. Keep your question concise and clear so that everyone knows what you are trying to solve.

Hope this helps :)

Pls brainliest...

Carbon, hydrogen, oxygen, and nitrogen account for more than 95% of the human body by weight. The correct option is A

An element in chemistry is a pure material made up of atoms that all share the same atomic number, or the quantity of protons in the nucleus.

The structure and operation of cells and tissues in the human body depend on the presence of these elements, which are present in a range of organic substances such as carbohydrates, lipids, proteins, and nucleic acids.

Therefore, In contrast to carbon, hydrogen, oxygen, and nitrogen which make up a larger portion of the body's weight, calcium and phosphorus are also crucial components of the human body.

Learn more about elements here : brainly.com/question/18096867

#SPJ1

If the silicate mineral amphibole has 50% of its silicate tetrahedral possessing 3-shared  and 1-unshared and another 50% possessing 2-shared  and 2-unshared oxygen atoms, the Si:O ratio is 1:4.

In the amphibole silicate mineral, 50% of the silicate tetrahedra have 3-shared oxygen atoms and 1-unshared, while the other 50% have 2-shared oxygen atoms and 2-unshared. To calculate the Si:O ratio, we'll analyze the contribution of each type of tetrahedron.

For the 3-shared, 1-unshared tetrahedra (50%):
1 Si and 4 O atoms (3 shared + 1 unshared) per tetrahedron.

For the 2-shared, 2-unshared tetrahedra (50%):
1 Si and 4 O atoms (2 shared + 2 unshared) per tetrahedron.

Since both types contribute equally, the overall ratio remains the same. Thus, the Si:O ratio in the tetrahedral structure of the amphibole silicate mineral is 1:4.

More on tetrahedral structure: https://brainly.com/question/28138253

#SPJ11

The entropy of a gas is directly proportional to the volume it occupies and inversely proportional to its temperature. Therefore, under the given conditions, the highest entropy (S) of one mole of Ne would occur at 28°C and 30 L.

This is because at higher temperatures, the gas molecules have higher kinetic energy and move more rapidly, increasing their disorder or entropy. On the other hand, at lower volumes, the gas molecules are more confined and have less space to move around, leading to a decrease in entropy.

Therefore, the conditions of 28°C and 30 L would result in the highest entropy for one mole of Ne.

Learn more about entropy here:

https://brainly.com/question/20166134

#SPJ11

The percent ratio of In-112 to In-115 in naturally occurring indium is approximately 21.3% to 78.7%. The atomic mass of indium is a weighted average of the atomic masses of its isotopes, taking into account their relative abundances:

Atomic mass of Indium = (mass of In-112 * % abundance of In-112) + (mass of In-115 * % abundance of In-115)

We can rearrange this equation to solve for the ratio of In-112 to In-115:

% abundance of In-112 / % abundance of In-115 = (Atomic mass of Indium - mass of In-115) / (mass of In-112 - mass of In-115)

Substituting the values given:

Atomic mass of Indium = 114.8 g/mol

Mass of In-112 = 111.905 g/mol

Mass of In-115 = 114.904 g/mol

% abundance of In-112 / % abundance of In-115 = (114.8 - 114.904) / (111.905 - 114.904) ≈ 0.213.

In conclusion, we have calculated the percent ratio of In-112 to In-115 in naturally occurring indium using the atomic mass of indium and the atomic masses and abundances of its isotopes.

for more questions on isotopes

https://brainly.com/question/14783375

#SPJ11

The corresponding half-life of this sample of radioactive polonium is 43.22 min.

To solve this problem, we need to use the formula for radioactive decay:
N = N0 x (1/2)^(t/T)
where N is the remaining amount, N0 is the initial amount, t is the time elapsed, and T is the half-life.
We know that at the end of 14 min, 1/16 of the sample remains. This means that N/N0 = 1/16, or N0/N = 16. We can substitute these values into the formula and solve for T:
1/16 = (1/2)^(14/T)
Taking the logarithm of both sides, we get:
log(1/16) = log[(1/2)^(14/T)]
log(1/16) = (14/T) x log(1/2)
T = -14 / [log(1/2) x log(1/16)]
T = 43.22 min (rounded to two decimal places)
Therefore, the corresponding half-life of this sample of radioactive polonium is 43.22 min. This means that after 43.22 min, half of the remaining sample will decay, leaving only 1/32 of the original amount. After another 43.22 min, half of that remaining amount will decay, leaving only 1/64 of the original amount, and so on. The half-life is an important characteristic of a radioactive substance, as it allows us to predict how much of the substance will remain after a certain amount of time has passed.

To know more about Radioactive visit:

https://brainly.com/question/1770619

#SPJ11

Answer: it would be d

Explanation:because it works out the most

Decreasing the temperature of the liquid while increasing the pressure of the gas will not cause as great of an increase in solubility as increasing the pressure alone.

The solubility of a gas in a liquid is directly related to the pressure of the gas above the liquid. Therefore, increasing the pressure of the gas above the liquid will always cause the greatest increase in the solubility of a gas in a liquid. This is known as Henry's Law, which states that the solubility of a gas in a liquid is directly proportional to the pressure of the gas above the liquid. As the pressure of the gas increases, more gas molecules are forced into the liquid, increasing the solubility. Temperature also affects solubility, but it is not as significant as pressure. As the temperature of a liquid increases, the solubility of a gas generally decreases. Therefore, decreasing the temperature of the liquid while increasing the pressure of the gas will not cause as great of an increase in solubility as increasing the pressure alone.

To know more about solubility visit :

https://brainly.com/question/31900586

#SPJ11

The answer is (A) 1100 mL. The balanced chemical equation for the decomposition of KClO3 is:

2KClO3(s) → 2KCl(s) + 3O2(g)

According to the stoichiometry of the reaction, 2 moles of KClO3 produce 3 moles of O2.

First, we need to calculate the number of moles of O2 produced by the decomposition of 3.00 g of KClO3.

The molar mass of KClO3 is:

39.10 g/mol (K) + 35.45 g/mol (Cl) + 3 x 16.00 g/mol (O) = 122.55 g/mol

Therefore, 3.00 g of KClO3 is equal to:

3.00 g / 122.55 g/mol = 0.0245 mol KClO3

According to the stoichiometry of the reaction, 0.0245 mol KClO3 produces:

0.0245 mol KClO3 x (3 mol O2 / 2 mol KClO3) = 0.0368 mol O2

The ideal gas law can be used to calculate the volume of O2 produced:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.0821 L·atm/(mol·K)), and T is the temperature in Kelvin.

Converting the temperature of 24.0°C to Kelvin:

T = 24.0°C + 273.15 = 297.15 K

Substituting the values into the ideal gas law equation:

V = (nRT) / P = (0.0368 mol) x (0.0821 L·atm/(mol·K)) x (297.15 K) / 0.717 atm

V = 1.10 L or 1100 mL

Therefore, the answer is (A) 1100 mL

Learn more about chemical equation here:

https://brainly.com/question/28792948

#SPJ11

The most correct statement that describes chemical equilibrium is option (e) which states that the rates of the forward and reverse reactions become equal, and the reaction quotient is equal to the equilibrium constant.

At equilibrium, the concentration of reactants and products remains constant, and the reaction is said to be in a state of dynamic equilibrium. The forward and reverse reactions continue to occur, but at equal rates, which maintains the concentration of reactants and products.

The reaction quotient is a measure of the relative concentrations of reactants and products at any given time during the reaction. When the reaction quotient is equal to the equilibrium constant, the system is at equilibrium. Thus, option (c) is also a correct statement. Option (a) is incorrect because reactions do not cease at equilibrium, they are just occurring at equal rates. Option (d) is incorrect because some reactants may still be present at equilibrium.

To know more about chemical equilibrium visit:

https://brainly.com/question/4289021

#SPJ11

Part A: the heat required to warm 1.50 kg of sand from 26.0 ∘C to 100.0 ∘C is 1.09 x 10^5 J. Part B: the final temperature of the aluminum block is 26.0 + 12.3 = 38.3 ∘C. Part C: the specific heat capacity of the substance composing the rock is 0.23 J/g⋅∘C.

Part A:

The heat required to warm 1.50 kg of sand can be calculated using the formula:

q = mCsΔT

where q is the heat, m is the mass of sand, Cs is the specific heat capacity of sand, and ΔT is the change in temperature.

Substituting the values, we get:

q = (1.50 kg) x (1000 g/kg) x (0.84 J/g⋅∘C) x (100.0 - 26.0) ∘C

q = 1.09 x 10^5 J

Therefore, the heat required to warm 1.50 kg of sand from 26.0 ∘C to 100.0 ∘C is 1.09 x 10^5 J.

Part B:

The final temperature of the aluminum block can be calculated using the formula:

q = mCsΔT

where q is the heat absorbed by the aluminum block, m is the mass of the block, Cs is the specific heat capacity of aluminum, and ΔT is the change in temperature.

Rearranging the formula, we get:

ΔT = q/(mCs)

Substituting the values, we get:

ΔT = 747 J / (61 g x 0.903 J/g⋅∘C)

ΔT = 12.3 ∘C

Therefore, the final temperature of the aluminum block is 26.0 + 12.3 = 38.3 ∘C.

Part C:

The specific heat capacity of the substance composing the rock can be calculated using the formula:

Cs = q/(mΔT)

where q is the heat absorbed by the rock, m is the mass of the rock, and ΔT is the change in temperature.

Substituting the values, we get:

Cs = 50.2 J / (3.5 g x (53 - 25) ∘C)

Cs = 0.23 J/g⋅∘C

Therefore, the specific heat capacity of the substance composing the rock is 0.23 J/g⋅∘C.

Visit here to learn more about heat capacity brainly.com/question/28302909

#SPJ11

The average kinetic energy of an object's particles is thermal energy and the correct option is option 2.

The energy associated with an object’s motion is called kinetic energy.

In chemistry, kinetic energy is the energy associated with the constant, random bouncing of atoms or molecules.

Thermal energy and temperature are closely related. Both reflect the kinetic energy of moving particles of matter. However, temperature is the average kinetic energy of particles of matter, whereas thermal energy is the total kinetic energy of particles of matter.

The greater the motion of particles, the higher a substance’s temperature and thermal energy.

Learn more about Kinetic energy, here:

https://brainly.com/question/999862

#SPJ1

At pH 1, aspartic acid will have an overall charge of -1. The carboxyl group will have a charge of -1 and the amino group will be protonated with a charge of +1. The R group will remain unchanged.

Aspartic acid is an amino acid with an acidic side chain, which means it can donate protons. At pH 1, the solution is very acidic and the amino group will be protonated, giving it a charge of +1. The carboxyl group, which is already acidic, will also donate a proton at this pH, resulting in a charge of -1.

Since the charge on the carboxyl group is higher than that of the amino group, the overall charge of the molecule will be -1. The R group, which in this case is a carboxyl group, will remain unchanged as it is not affected by the pH of the solution. Therefore, the overall charge on aspartic acid at pH 1 is -1, with the carboxyl group carrying a charge of -1 and the amino group carrying a charge of +1.

Learn more about aspartic acid here:

https://brainly.com/question/9379332

#SPJ11