Answer:
Explanation:
a )
Radius of the sun = .69645 x 10⁹ m .
600 times = 600 x .69645 x 10⁹ m
= 4.1787 x 10¹¹ m .
surface area A = 4π (4.1787 x 10¹¹)²
= 219.317 x 10²²
energy radiated E = σ A Τ⁴
= 5.67 x 10⁻⁸ x 219.317 x 10²² x (3000)⁴
= 100695 x 10²⁶ J
To know the wavelength of photon emitted
[tex]\lambda_mT= b[/tex]
[tex]\lambda_m= \frac{b}{T}[/tex]
= 2.89777 x 10⁻³ / 3000
= 966 nm
= 1275 /966 eV
1.32 x 1.6 x 10⁻¹⁹ J
= 2.112 x 10⁻¹⁹ J
No of photons radiated = 100695 x 10²⁶ / 2.112 x 10⁻¹⁹
= 47677.5 x 10⁴⁵
= .476 x 10⁵⁰ .
b )
energy radiated by our sun per second
E₂ = σ A 5800⁴
energy radiated by Betelgeuse per second
E₁ = σ x 600²A x 3000⁴
E₁ / E₂ = σ x 600²A x 3000⁴ / σ A 5800⁴
= 36 X 10⁴ x 3⁴ x 10¹² / 58⁴ x 10⁸
= 25.76 x 10⁸ x 10⁻⁵
= 25760 times .
The site from which an airplane takes off is the origin. The X axis points east, the y axis points straight up. The position and velocity vectors of the plane at a later time are given by r=(1.21x103i+3.45x104;)m and v= (2 i-3.5j) m/s The magnitude, in meters, of the plane's displacement from the origin is:_________
a. 2.50 x104
b. 1.45 x 104
c. 3.45x104
d. 2.5x103
e. none of the above
Answer:
d = 3.5*10^4 m
Explanation:
In order to calculate the displacement of the airplane you need only the information about the initial position and final position of the airplane. THe initial position is at the origin (0,0,0) and the final position is given by the following vector:
[tex]\vec{r}=(1.21*10^3\hat{i}+3.45*10^4\hat{j})m[/tex]
The displacement of the airplane is obtained by using the general form of the Pythagoras theorem:
[tex]d=\sqrt{(x-x_o)^2+(y-y_o)^2}[/tex] (1)
where x any are the coordinates of the final position of the airplane and xo and yo the coordinates of the initial position. You replace the values of all variables in the equation (1):
[tex]d=\sqrt{(1.12*10^3-0)^2+(3.45*10^4-0)^2}=3.45*10^4m[/tex]
hence, the displacement of the airplane is 3.45*10^4 m
Three identical 6.0-kg cubes are placed on a horizontal frictionless surface in contact with one another. The cubes are lined up from left to right and a force is applied to the left side of the left cube causing all three cubes to accelerate to the right at 2.0 m/s2. What is the magnitude of the force exerted on the middle cube by the left cube in this case
Answer:
24 Newtons
Explanation:
The force exerted in the middle cube needs to be enough to move the middle cube and the right cube with an acceleration of 2 m/s2.
The mass of those two cubes combined is 6 + 6 = 12 kg
So, using the following equation, we can find the force:
Force = mass * acceleration
Force = 12 * 2
Force = 24 Newtons
calculate the volume of marble if its diameter is 10mm
Answer:
The volume of the marble is [tex]523.33\ mm^2[/tex].
Explanation:
Marble is spherical in shape. The diameter of marble is 10 mm. It radius will be 5 mm.
The volume of spherical shaped object is given by :
[tex]V=\dfrac{4}{3}\pi r^3[/tex]
Plugging all the values, we get :
[tex]V=\dfrac{4}{3}\times 3.14\times (5)^3\\\\V=523.33\ mm^2[/tex]
So, the volume of the marble is [tex]523.33\ mm^2[/tex].
A ball thrown horizontally from the top of a building hits the ground in 0.600 s. If it had been thrown with twice the speed in the same direction, it would have hit the ground in:________.
a. 4.0 s.
b. 1.0 s.
c. 0.50 s.
d. 0.25 s.
e. 0.125 s.
Answer:
none of the answers is correct, the time is the same t₁ = t₂ = 0.600 s
Explanation:
This is a kinematics exercise, analyze the situation a bit. The vertical speed in both cases is the same is zero, the horizontal speed in the second case is double (vₓ₂ = 2 vₓ₁)
let's find the time to hit the ground
y = y₀ + I go t - ½ g t²
0 = y₀ - ½ g t²
t = √ 2y₀ / g
with the data from the first launch
y₀i = ½ g t²
y₀ = ½ 9.8 0.6²
y₀ = 1,764 m
with this is the same height the time to descend in the second case is the same
t₂ = 0.600 s
this is because the horizontal velocity change changes the offset on the x axis, but does not affect the offset on the y axis
Therefore, none of the answers is correct, the time is the same
t₁ = t₂ = 0.600 s
The Z0 boson, discovered in 1985, is the mediator of the weak nuclear force, and it typically decays very quickly. Its average rest energy is 91.19 GeV, but its short lifetime shows up as an intrinsic width of 2.5 GeV. what is the lifetime of this particle?
Answer:
The lifetime of the particle is [tex]\Delta t = 2.6*10^{-25} \ s[/tex]
Explanation:
From the question we are told that
The average rest energy is [tex]E = 91.19 \ GeV = 91.19GeV * \frac{1.60 *10^{-10} J }{1GeV} = 1.46 *10^{-8}J[/tex]
The intrinsic width is [tex]\Delta E =2.5eV = 2.5GeV * \frac{1.60 *10^{-10}J }{1GeV} = 4*10^{-10} J[/tex]
The lifetime is mathematically represented as
[tex]\Delta t = \frac{h}{\Delta E}[/tex]
Where h is the Planck's constant with a value of [tex]1.055*10^{-34} \ J\cdot s[/tex]
substituting values
[tex]\Delta t = \frac{1.055*10^{-34}}{4 *10^{-10}}[/tex]
[tex]\Delta t = 2.6*10^{-25} \ s[/tex]
Question
20
what would be the advantages if your body had magnetic properties science subject
Answer:
Some of the advantages if our body had magnetic properties are as follows:
Magnetic properties can have health benefits such as recovering quickly from a stroke, resolving bladder problems, and reducing blood pressure.Brain will be able to control more activities of the nervous system and other organs of the body using magnetic power.Heart will have many benefits of magnetic properties and able to provide more energy to the entire body through the circulation of blood.Magnetic properties in body will be able to maintain the production of melatonin that controls the sleep patterns.Magnetic properties will be able to kill cancer causing cells.Hence, magnetic properties are somehow beneficial for humans.
"A trooper is moving due south along the freeway at a speed of 28 m/s. At time t = 0, a red car passes the trooper. The red car moves with constant velocity of 40 m/s southward. At the instant the trooper's car is passed, the trooper begins to speed up at a constant rate of 2.9 m/s2. What is the maximum distance ahead of the trooper that is reached by the red car?"
Answer:
24.83 m
Explanation:
Applying the equation of motion;
d = vt + 0.5at^2 ......1
Where;
d = distance
v = velocity
t = time
a = acceleration
For the trooper;
v = 28 m/s
a = 2.9 m/s^2
Substituting into equation 1;
d1 = 28t + 0.5(2.9t^2)
d1 = 28t + 1.45t^2
For the red car;
v = 40 m/s
a = 0
Substituting into equation 1
d2 = 40t
The difference in distance is;
d = d2 - d1
d = 40t - (28t + 1.45t^2)
d = 12t - 1.45t^2
The maximum distance is at d(d)/dt = 0
differentiating d;
d' = 12 - 2.9t = 0
2.9t = 12
t = 12/2.9 = 4.137931034482
t = 4.138 s
Substituting t into function d;
d(max) = 12(4.138) - 1.45(4.138^2)
d(max) = 24.8275862 = 24.83 m
the maximum distance ahead of the trooper that is reached by the red car is 24.83 m
When you "crack" a knuckle, you suddenly widen the knuckle cavity, allowing more volume for the synovial fluid inside it and causing a gas bubble suddenly to appear in the fluid. The sudden production of the bubble, called "cavitation", produces a sound pulse---the cracking sound. Assume that the sound is transmitted uniformly in all directions and that it fully passes from the knuckle interior to the outside, at a distance of 0.29 m from your ear. If the pulse has a sound level of 61 dB at your ear, what is the rate at which energy is produced by the cavitation
Answer:If a wave y(x, t) = (6.0 mm) sin(kx + (600 rad/s)t + Φ) travels along a string, how much time does any given point on the string take to move between displacements y = +2.0 mm and y = -2.0 mm?
Explanation:
A swimmer heading directly through a 200m wide river reaches the opposite shore in 6 min 40s. She is washed downstream 480 m. How fast can you swim in calm water?
Answer :v=480m400s=1.2ms
2002+4802=H2
The hypotenuse H=520m
A quicker way to get the length of the hypotenuse is to recognize that this is a simple 5–12–13 triangle where the sides are multiples of 5, 12, and 13:
5(40) = 200m, 12(40)= 480m, 13(40)= 520m
We know that the swimmer travelled 520 m in 400 seconds, so her average speed was:
VR=520m400sec= 1.3ms
hope i got it right!! xx
Explanation:
A student throws a set of keys vertically upward to his fraternity brother, who is in a window 3.60 m above. The brother's outstretched hand catches the keys 1.60 s later. (Take upward as the positive direction. Indicate the direction with the sign of your answer.)With what initial velocity were the keys thrown?
Answer:
[tex]v_{i}=10.10 m/s[/tex]
Explanation:
The equation of the position is:
[tex]y=y_{i}+v_{i}t-0.5gt^{2}[/tex]
Where:
v(i) is the initial velocity
The initial position y(i) will be zero and the final position y = 3.60 m.
So, we just need to solve this equation for v(i).
[tex]v_{i}=\frac{y+0.5gt^{2}}{t}[/tex]
[tex]v_{i}=\frac{3.6+0.5*9.81*1.6^{2}}{1.6}[/tex]
[tex]v_{i}=10.10 m/s[/tex]
Therefore, the initial velocity is 10.10 m/s upwards.
I hope it helps you!
Escaping from a tomb raid gone wrong, Lara Croft (m = 62.0 kg) swings across an alligator-infested river from an 8.80-m-long vine. If her speed at the bottom of the swing is 6.30 m/s and she makes it safely across the river, what is the minimum breaking strength of the vine?
Answer:
887.2 N
Explanation:
Given that
Mass of Lara, m = 62 kg
Length of the vine, l = 8.8 m
Speed of the swing, v = 6.3 m/s Then,
We start by calculating her weight.
w = mass * acceleration
w = mg
w = 62 * 9.8
w = 607.6 N
F(c) = mv²/l, on substituting
F(c) = (62 * 6.3²) / 8.8
F(c) = 2460.78 / 8.8
F(c) = 279.6 N
T - 607.6 N = 279.6 N
T = 607.6 N + 279.6 N
T = 887.2 N
Thus, the minimum breaking strength of the vine is 887.2 N
The minimum breaking strength of the vine is about 900N.
TensionTension is a force developed by a rope, string, or cable when stretched under an applied force.
Given:
Mass (m) = 62 kg, length (l) = 8.8 m, velocity (v) = 6.3 m/s, g = 10 m/s².
Weight(W) = m * g = 62 * 10 = 620N
centripetal force = F(c) = mv²/l = 62 * 6.3² / 8.8 = 279.6N
T - W = F(c)
T - 620 = 279.6
T = 900N
The minimum breaking strength of the vine is about 900N.
Find out more on Tension at: https://brainly.com/question/24994188
A mass m at the end of a spring vibrates with a frequency of 0.72 Hz . When an additional 700 g mass is added to m, the frequency is 0.64 Hz . Part A What is the value of m? Express your answer using two significant figures.
Answer:
The value of m is 2635.294 grams.
Explanation:
Let suppose that mass-spring system has a simple harmonic motion, to this respect the formula for frequency is:
[tex]f = \frac{\omega}{2\pi}[/tex]
Where [tex]\omega[/tex] is the angular frequency, measured in radians per second.
For a mass-spring system under simple harmonic motion, the angular frequency is:
[tex]\omega = \sqrt{\frac{k}{m} }[/tex]
Where:
[tex]k[/tex] - Spring constant, measured in newtons per meter.
[tex]m[/tex] - Mass, measured in kilograms.
The following equation is obtained after replacing angular frequency in frequency formula:
[tex]f = \frac{1}{2\pi}\cdot \sqrt{\frac{k}{m} }[/tex]
As this shows, frequency is inversely proportional to the square root of mass. Hence, the following relationship is deducted:
[tex]f_{1}\cdot \sqrt{m_{1}} = f_{2} \cdot \sqrt{m_{2}}[/tex]
If [tex]m_{2} = m_{1} + 700\,g[/tex], [tex]f_{1} = 0.72\,hz[/tex] and [tex]f_{2} = 0.64\,hz[/tex], the resulting expression is simplified and then initial mass is found after clearing it:
[tex]f_{1} \cdot \sqrt{m_{1}} = f_{2} \cdot \sqrt{m_{1}+700\,g}[/tex]
[tex]f_{1}^{2} \cdot m_{1} = f_{2}^{2}\cdot (m_{1} + 700\,g)[/tex]
[tex]\left(\frac{f_{1}}{f_{2}} \right)^{2}\cdot m_{1} = m_{1} + 700\,g[/tex]
[tex]\left[\left(\frac{f_{1}}{f_{2}}\right)^{2} - 1\right]\cdot m_{1} = 700\,g[/tex]
[tex]m_{1} = \frac{700\,g}{\left(\frac{f_{1}}{f_{2}} \right)^{2}-1}[/tex]
[tex]m_{1} = \frac{700\,g}{\left(\frac{0.72\,hz}{0.64\,hz} \right)^{2}-1}[/tex]
[tex]m_{1} = 2635.294\,g[/tex]
The value of m is 2635.294 grams.
An airplane takes off a runway at a constant speed of 49m/s at constant angle 30 to the horizontal
Complete Question
An airplane takes off a runway at a constant speed of 49 m/s at constant angle 30 to the horizontal.How high (in meters ) is the airplane above the ground 13 seconds after takeoff?
Answer:
The height is [tex]H = 318.5 \ m[/tex]
Explanation:
From the question we are told that
The speed at which the plane takes off is [tex]u = 49 \ m/s[/tex]
The angle at which it takes off is [tex]\theta = 30 ^o[/tex]
The time taken is [tex]t = 13 s[/tex]
The vertical distance traveled is mathematically represented as
[tex]H = u sin \theta t[/tex]
Substituting values
[tex]H = (49) * sin (30) *13[/tex]
[tex]H = 318.5 \ m[/tex]
Complete the first and second sentences, choosing the correct answer from the given ones.
1. The water temperature in the dish depends on the A / B / C / D.
A. average kinetic energy of water molecules
B. total kinetic energy of water molecules
C. water mass. D. potential energy of the container with water
2. The internal energy of the water in the vessel is E / F / G.
E. potential energy of the vessel with water
F. average kinetic energy of water molecules
G. sum of kinetic energy and potential water molecules
Answer:
Hope this helps :)
Explanation:
1. A
2. G (because the basic definition of internal energy is, the sum of kinetic and potential energies of water molecules)
Astrophysicist Neil deGrasse Tyson steps into an elevator on the 29th floor of a skyscraper. For some odd reason, there is a scale on the floor of the elevator. Neil, whose mass is about 115 kg, decides to step on the scale and presses the button for a lower floor. The elevator starts traveling downwards with a constant acceleration of 1.5 m/s2 for 6.0 seconds, and then travels at a constant velocity for 6.0 seconds. Finally, the elevator has an upward acceleration of 1.5 m/s2 for 6.0 seconds as it comes to a stop.
A. If each floor is approximately 4 m tall, which floor does the elevator stop at?
B. If the mass of the elevator is 1,200 kg, what is the maximum tension of the elevator cable?
Answer:
A. Final Floor = 15.5 = 15 (Considering downward portion of elevator)
B. T = 14859.5 N = 14.89 KN
Explanation:
A.
First we calculate distance covered by the elevator during downward motion. Downward motion consists of two parts. First one is uniformly accelerated. For that part we use 2nd equation of motion:
s₁ = Vi t + (0.5)at²
where,
s₁ = distance covered during accelerated downward motion = ?
Vi = initial speed = 0 m/s (since elevator is initially at rest)
t = time taken = 6 s
a = acceleration = 1.5 m/s²
Therefore,
s₁ = (0 m/s)(6 s) + (0.5)(1.5 m/s²)(6 s)²
s₁ = 4.5 m
also we find the final velocity using 1st equation of motion:
Vf = Vi + at
Vf = 0 m/s + (1.5 m/s²)(6 s)
Vf = 9 m/s
Now, the second part of downward motion is with constant velocity. So:
s₂ = vt
where,
s₂ = distance covered during constant speed downward motion = ?
v = Vf = 9 m/s
t = 6 s
Therefore,
s₂ = (9 m/s)(6 s)
s₂ = 54 m
Now for distance covered during upward motion is given by the 2nd equation of motion. Since the values of acceleration and time are same. Therefore, it will be equal in magnitude to s₁:
s₃ = s₁ = 4.5 m
Therefore, the total distance covered by elevator is given by following equation:
s = s₁ + s₂ - s₃ (Downward motion taken positive)
s = 4.5 m + 54 m - 4.5 m
s = 54 m
Therefore, net motion of the elevator was 54 m downwards.
So the final floor will be:
Final Floor = Initial Floor - Distance Covered/Length of a floor
Final Floor = 29 - 54 m/4m
Final Floor = 15.5 = 15 (Considering the downward portion or floor of elevator)
B.
The maximum tension will occur during the upward accelerated motion. It is given by the formula:
T = m(g + a)
where,
T = Max. Tension in Cable = ?
m = total mass of person and elevator = 115 kg + 1200 kg = 1315 kg
g = 9.8 m/s²
a = acceleration = 1.5 m/s²
Therefore,
T = (1315 kg)(9.8 m/s² + 1.5 m/s²)
T = 14859.5 N = 14.89 KN
John heats 1 kg of soup from 25 °C to 70 °C for 15 minutes by a heater. How long does the same heater take to heat 1.5 kg of the same kind of soup from 20 °C to 80 °C? The energy output per unit time by the heater is constant.
Answer:
30 minutes
Explanation:
Energy per time is constant, so:
E₁ / t₁ = E₂ / t₂
m₁C₁ΔT₁ / t₁ = m₂C₂ΔT₂ / t₂
(1 kg) C (70°C − 25°C) / 15 min = (1.5 kg) C (80°C − 20°C) / t
(1 kg) (45°C) / 15 min = (1.5 kg) (60°C) / t
3/min = 90 / t
t = 30 min
Convert from standard form to scientific notation:
0.00000013
A)1.3 x 10-7
B)13 x 108
C)1.3 x 107
D)13 x 10-8
A potential difference of 71 mV is developed across the ends of a 12.0-cm-long wire as it moves through a 0.27 T uniform magnetic field at a speed of 6.0 m/s. The magnetic field is perpendicular to the axis of the wire.
Required:
What is the angle between the magnetic field and the wire's velocity?
Answer:
Explanation: please see attached file I attached the answer to your question.
The angle between the magnetic field and the wire's velocity is 33.2 degrees.
Calculation of the angle:Since the potential difference = 71mv = 71 *10 ^-3 V
The length is 12 cm = 0.12m
The magnetic field i.e. B = 0.27T
The speed or v = 4 m/s
here we assume [tex]\theta[/tex] be the angle
So,
e = Bvl sin[tex]\theta[/tex]
So,
[tex]Sin\theta[/tex] = e/bvl
= 71*10^-3 / 0.27 *4*0.12
= 0.5478
= 33.2 degrees
Therefore, the angle should be 33.2 degrees
Learn more about an angle here: https://brainly.com/question/14661707
A person is swimming 1.1 m beneath the surface of the water in a swimming pool. A child standing on the diving board drops a ball into the pool directly above the swimmer. The swimmer sees the ball dropped from a height of 4.2 m above the water. From what height was the ball actually dropped?
Answer:
The actual height is [tex]A =3.158 \ m[/tex]
Explanation:
From the question we are told that
The depth of the person is [tex]d = 1.1 \ m[/tex]
The apparent height is [tex]D = 4.2 \ m[/tex]
Generally
The refractive index of water is [tex]n_w = 1.33[/tex]
The refractive index of the air is [tex]n_a = 1[/tex]
The apparent depth is mathematically represented as
[tex]D = A [\frac{n_w}{n_a} ][/tex]
substituting values
[tex]4.2 = A [\frac{1.33}{1} ][/tex]
=> [tex]A = \frac{4.2 }{1.33}[/tex]
[tex]A =3.158 \ m[/tex]
The ball was dropped at the height of "3.158 m". To understand the calculation, check below.
Refractive IndexAccording to the question,
Water's refractive index, [tex]n_w[/tex] = 1.33
Air's refractive index, [tex]n_a[/tex] = 1
Apparent height, D = 4.2 m
Person's depth, d = 1.1 m
We know the relation,
→ D = A[[tex]\frac{n_w}{n_a}[/tex]]
By substituting the values, we get
4.2 = A[[tex]\frac{1.33}{1}[/tex]]
By applying cross-multiplication,
A = [tex]\frac{4.2}{1.33}[/tex]
= 3.158 m
Thus the approach above is correct.
Find out more information about refractive index here:
https://brainly.com/question/10729741
someone please help me with this thanks
Two parallel plates having charges of equal magnitude but opposite sign are separated by 21.0 cm. Each plate has a surface charge density of 39.0 nC/m2. A proton is released from rest at the positive plate. (a) Determine the magnitude of the electric field between the plates from the charge density.
Answer:
E = 3.45*10^-19 N/C
Explanation:
a) The electric field between two parallel plates id given by the following formula:
[tex]E=\frac{\sigma}{\epsilon_o}[/tex] (1)
where:
σ: surface charge density of the plates = 39.0nC/m^2
εo: dielectric permittivity of vacuum = 8.85*10^-12 C/Nm^2
You replace these values in the equation (1):
[tex]E=\frac{39.0*10^{-9}C/m^2}{8.85*10^{-12}C^2/Nm^2}\\\\E=3.45*10^{-19}\frac{N}{C}[/tex]
The electric field in between the parallel plates is 3.45*10^-19 N/C
Q.1- Find the distance travelled by a particle moving in a straight line with uniform acceleration, in the 10th unit of time.
Answer:
If the acceleration is constant, the movements equations are:
a(t) = A.
for the velocity we can integrate over time:
v(t) = A*t + v0
where v0 is a constant of integration (the initial velocity), for the distance traveled between t = 0 units and t = 10 units, we can solve the integral:
[tex]\int\limits^{10}_0 {A*t + v0} \, dt = ((A/2)10^2 + v0*10) = (A*50 + v0*10)[/tex]
Where to obtain the actual distance you can replace the constant acceleration A and the initial velocity v0.
Calculate the potential difference across a 25-Ohm. resistor if a 0.3-A current is flowing through it.
V
Answer:7.5V
Explanation:
Ohm's law, V=IR
so, V=0.3×25
V=7.5V
Answer:
7.5 V
Explanation:
Two parallel, vertical, plane mirrors, 38.8 cm apart, face each other. A light source at point P is 30.1 cm from the mirror on the left and 8.7 cm from the mirror on the right.
(a) How many images of point P are formed by the mirrors?
(b) Find the distance from the mirror on the right to the two nearest images behind the mirror.
first nearest image=
second nearest image=
(c) Find the number of reflections of light rays for each of these images.
first nearest image=
second nearest image=
Answer:
Explanation shown below.
Explanation:
1.The number of images formed by 2 parallel mirrors is an infinite number of images.
2. The characteristics of a plane mirror is such that the object distance equals the image distance.
Hence the object distance is 8.7cm from the right; the image formed would be 8.7cm behind the mirror.
Now a second image is going to be formed by the left mirror which is going to have an image distance of 30.1cm behind the mirror.
Now this image would be reflected on the right side to form a new image which is going to be seen as 38.8 +30.1 = 68.9cm behind the right Mirror .
Hence the shortest distances are 8.7cm and 68.9cm
3. The number of reflections is infinite for both cases.
You are moving a desk that has a mass of 36 kg; its acceleration is 0.5 m / s 2. What is the force being applied
Answer:
18 N
Explanation:
Force can be found using the following formula.
f= m*a
where m is the mass and a is the acceleration.
We know the desk has a mass of 36 kilograms. We also know that its acceleration is 0.5 m/s^2.
m= 36 kg
a= 0.5 m/s^2
Substitute these values into the formula.
f= 36 kg * 0.5 m/s^2
Multiply 36 and 0.5
f=18 kg m/s^2
1 kg m/s^2 is equivalent to 1 Newton, or N.
f= 18 Newtons
The force being applied is 18 kg m/s^2, Newtons, or N
A student in the front of a school bus tosses a ball to another student in the back of the bus while the bus is moving forward at constant velocity. The speed of the ball as seen by a stationary observer in the street:_________
a. is less than that observed inside the bus.
b. is the same as that observed inside the bus
c. may be either greater or smaller than that observed inside the bus.
d. may be either greater, smaller, or equal to that observed inside the bus.
e. is greator than that observed inside the bus
Answer:
d
Explanation:
good question. now the bus is moving in constant velocity . a student in front tosses a ball to the student in back. but we dont know the speed at which the student tosses a ball. we have to assume the speed
assume the speed of ball is slightly less than the speed of bus. in this case the stationary observer sees the ball in slower speed than the one inside the bus.
so a is correct
now assume the speed of ball is 1/2 the speed of bus. here stationary observer sees the ball the same speed as the one in bus observe
b is correct
assume the speed of ball is very small than the speed of bus . in this case the stationary observer see in grater speed than the student in bus
e also correct
so correct answer is d. it depends on the speed of ball tossed by the student in front.
Calculate the energy released by the electron-capture decay of 5727Co. Consider only the energy of the nuclei (ignore the energy of the surrounding electrons). The following masses are given:
5727Co: 56.936296u
5726Fe: 56.935399u
Express your answer in millions of electron volts (1u=931.5MeV/c2) to three significant figures.
A negligible amount of this energy goes to the resulting 5726Fe atom as kinetic energy. About 90 percent of the time, after the electron-capture process, the 5726Fe nucleus emits two successive gamma-ray photons of energies 0.140MeV and 1.70 102MeV in decaying to its ground state. The electron-capture process itself emits a massless neutrino, which also carries off kinetic energy. What is the energy of the neutrino emitted in this case?
Express your answer in millions of electron volts.
Answer:
Explanation:
⁵⁷Co₂₇ + e⁻¹ = ²⁷Fe₂₆
mass defect = 56.936296 + .00055 - 56.935399
= .001447 u
equivalent energy
= 931.5 x .001447 MeV
= 1.3479 MeV .
= 1.35 MeV
energy of gamma ray photons = .14 + .017
= .157 MeV .
Rest of the energy goes to neutrino .
energy going to neutrino .
= 1.35 - .157
= 1.193 MeV.
A 0.25 kg steel ball is tied to the end of a string and then whirled in a vertical circle at a constant speed v. The length of the string is 0.62 m, and the tension in the string when the ball is at the top of the circle is 4.0 N. What is v
Answer:
Explanation:
Let the tension in the string be T . At the top of the circle , total force acting on them = T + mg . This will provide centripetal force
T + mg = m v² / r
4 + .25 x 9.8 = .25 x v² / .62
6.45 = .25 v² / .62
v² = 16
v = 4 m /s .
You have a suction cup that creates a circular region of low pressure with a 30 mm diameter. It holds the pressure to 85 % of atmospheric pressure. What "holding force" does the suction cup generate in N
Answer:
Force = 60.08 N
Explanation:
Given that
Diameter d = 30 mm
Holding pressure = 85 % of Atmospherics pressure
Solution
As we know that here 1 atm = 10⁵ N/m²
and pressure is known as force per unit area
pressure = [tex]\frac{F}{A}[/tex] ................1
put here value and we will get
F = [tex]0.85\times 10^5\times \frac{\pi}{4}\times 0.03^2\ N[/tex]
solve it we get
Force = 60.08 N
6. When a positive charge is released and moves along an electric field line, it moves to a position of A) lower potential and lower potential energy. B) lower potential and higher potential energy. C) higher potential and lower potential energy. D) higher potential and higher potential energy.
Answer:
Since you would have to do work on the charge to bring it back to its original position, the charge moves to a position of lower potential and lower potential energy.
The positive charge is released from a point such that it will move along an uniform electric field to the position of lower potential and lower potential energy. Therefore, option (A) is correct,
When a positive charge (say +Q) is released from a point (say A) and moves in an uniform electric field to reach the point (say B), then some work is done on the charge. This work done is given as,
[tex]W=+Q(V_{A}-V_{B})[/tex]
Here, [tex]V_{A}[/tex] and [tex]V_{B}[/tex] are the potential differences between the points A and B respectively..
This means the charge is moving from higher potential to lower potential. And since it is moving along the uniform electric field, therefore the electric potential energy of charged system is decreased.
Thus, we conclude that on releasing the positive charge from a point, it starts moving along the electric field towards the direction of lower electric potential and lower electric potential energy. Hence, option (A) is correct.
Learn more about electric potential and electric potential energy here:
https://brainly.com/question/12645463?referrer=searchResults
