The solubility of cadmium oxalate, , in 0.150 M ammonia is mol/L. What is the oxalate ion concentration in the saturated solution? If the solubility product constant for cadmium oxalate is , what must be the cadmium ion concentration in the solution? Now, calculate the formation constant for the complex ion

Answers

Answer 1

Answer:

[Cd²⁺] = 2.459x10⁻⁶M

Kf = 9.96x10⁶

Explanation:

Solubility of CdC₂O₄ is 6.1x10⁻³M and ksp is 1.5x10⁻⁸

The ksp of CdC₂O₄ is:

CdC₂O₄(s) ⇄ Cd²⁺(aq) + C₂O₄²⁻(aq)

ksp = [Cd²⁺] [C₂O₄²⁻] = 1.5x10⁻⁸

As solubility is 6.1x10⁻³M, concentration of C₂O₄²⁻ ions is 6.1x10⁻³M. Replacing:

[Cd²⁺] = 1.5x10⁻⁸ / [6.1x10⁻³M]

[Cd²⁺] = 2.459x10⁻⁶M

All Cd²⁺ in solution is 6.1x10⁻³M and exist as Cd²⁺ and as Cd(NH₃)₄²⁺. That means concentration of Cd(NH₃)₄²⁺ is:

[Cd(NH₃)₄²⁺] + [Cd²⁺] = 6.1x10⁻³M

[Cd(NH₃)₄²⁺] = 6.1x10⁻³M - 2.459x10⁻⁶M = 6.098x10⁻³M

[Cd(NH₃)₄²⁺] = 6.098x10⁻³M

In the same way, the whole concentration of NH₃ in solution is 0.150M, as you have 4ₓ6.098x10⁻³M = 0.024M of NH₃ producing the complex, the concentration of the free NH₃ is:

[0.150M] = [NH₃] + 0.024M

0.1256M = [NH₃]

The equilibrium of the complex formation is:

Cd²⁺ + 4 NH₃ → Cd(NH₃)₄²⁺

The kf, formation constant, is defined as:

Kf = [Cd(NH₃)₄²⁺] / [Cd²⁺] [NH₃]⁴

Replacing:

Kf = [6.098x10⁻³M] / [2.459x10⁻⁶M] [0.1256M]⁴

Kf = 9.96x10⁶


Related Questions

Which correctly lists the three processes that are affected by freeze and thaw cycles?
creep, landslide, and deposition
deposition, creep, and weathering
landslide, slump, and deposition
O slump. weathering, and creep

Answers

Answer:

slump. weathering, and creep

Explanation:

Freezing and thawing cycle in geology is the process in which water gets in between soil space or rock cracks, freeze in a cold season, and then melt in a warmer season, exerting a force on the soil or rock around it. This force is due to the expansion and contraction of water when it changes from ice to liquid water.

The three geological processes slump, weathering and creep all depend on thawing and freezing cycle among other factors.

Slump: Slump is a type of geological process that occurs when coherent mass of loosely consolidated materials or a rock layer moves a short distance down a slope. The movement of a slump is characterized by sliding along a concave-upward or planar surface. Causes includes earthquake shocks, thorough wetting, freezing and thawing, undercutting, and loading of a slope.Weathering: This is a geological process that results in the gradual disintegration of rocks into smaller sizes. It is one of the most important soil formation process, and is different from erosion by the degree of movement of the soil formed. Weathering does not move the soil from its origin. Thawing and freezing cycle plays a major role in weathering by helping crack up the rocks and by also tearing the rock apart. plays a major role.Creep: This is the slow, often imperceptible downslope movement of soil or other debris. The effects of creep is often seen in the presence of physical characteristics like bent trees, tilted fences, and cracked walls.  Creep is caused by multiple factors, of which heaving is likely the most important process. Heaving involves the expansion and contraction of rock fragments, and occurs during cycles of wetting and drying, as well as freezing and thawing.

Answer:

It is slump, weathering and creep

Explanation:

Took the test on edg

In Chapter 4, we will learn that single bonds experience free rotation at room temperature, while double bonds do not. Consider the two C-N bonds in the structure. One of these bonds exhibits free rotation, as expected for a single bond, but the other C-N bond exhibits restricted rotation. Identify the C-N bond with restricted rotation, and justify your answer by drawing resonance structures.

Answers

Answer:

Explanation:

The main objective here is to draw a diagram of an heterocyclic compound containing two C-N bonds in the structure. One with free rotation, as expected for a single bond, but the other C-N bond exhibits restricted rotation. After that ; we will identify the C-N bond with restricted rotation, and also justify our answer by drawing resonance structures.

So; the first image below shows the structure of the heterocyclic compound containing two C-N bonds in the structure with One with free rotation, as expected for a single bond, but the other C-N bond exhibits restricted rotation. From the first diagram. the squared area indicates the  C-N bond that exhibits restricted rotation.

The amide bonds in the C-N bonds offers the resonance characteristics and thus exhibits restricted rotation. The resonance is shown in the second image below

Constructive interference occurs when the compression of one wave meets
up with the compression of a second wave.
A. True
B. False

Answers

Its true because their trough and crest join together to form a new wave

Answer:

True

Explanation:

Describe why some acids are strong while other acids are weak

Answers

Answer:

I hope this help you. Mark me as brainliest and rate please

Explanation:

the terms strong and weak as applied to acids. As a part of this it defines and explains what is meant by pH, Ka and pKa.

It is important that you don't confuse the words strong and weak with the terms concentrated and dilute.

As you will see below, the strength of an acid is related to the proportion of it which has reacted with water to produce ions. The concentration tells you about how much of the original acid is dissolved in the solution.

It is perfectly possible to have a concentrated solution of a weak acid, or a dilute solution of a strong acid.

Monel metal is a corrosion-resistant copper-nickel alloy used in the electronics industry. A particular alloy with a density of 8.80 g/cm3 and containing 0.090 % Si by mass is used to make a rectangular plate that is 15.0 cm long, 12.5 cm wide, and 3.50 mm thick and has a 2.50-cm-diameter hole drilled through its center such that the height of the hole is 3.50 mm .
The silicon in the plate is a mixture of naturally occurring isotopes. One of the those isotopes is silicon-30, which has an atomic mass of 29.97376 amu. The percent natural abundance, which refers to the atoms of a specific isotope, of silicon-30 is 3.10%.
Part A What is the volume of the plate?Express the volume numerically in cubic centimeters.
Part B How many silicon-30 atoms are found in this plate?
Express your answer numerically using two significant figures.

Answers

Answer:

Based on the given question, the dimensions of the plate is 15 cm in length, 12.5 cm in width, and 3.50 mm in thickness (0.350 cm). Now the volume of the plate will be,  

V = 15 cm × 12.5 cm × 0.350 cm = 65.62 cm³

A hole of diameter 2.50 cm is drilled through the center of the plate, at the height of 3.50 mm or 0.350 cm. Now the volume of the hole is π(r)²h,  

= 22/7 × (1.25 cm)² × 0.350 cm = 1.72 cm³

Thus, the volume of the plate will be determined by subtracting the volume of plate with the volume of hole, which will be,  

65.62 cm³ - 1.72 cm³ = 63.9 cm³

The density of the alloy is 8.80 g/cm³, therefore, the mass of the alloy can be determined by using the formula, mass = density * volume  

mass = 8.80 g/cm³ × 63.9 cm³ = 562.32 grams

Of the total alloy, 0.090 percent is Si, that is,  

(0.090/100) × 562.32 g = 0.506 grams of Si

The natural abundance of the element is not determined by mass but by the number of atoms it possess. For this Avogadro's number and atomic mass of Si is used. Now the number of atoms of Si present is,  

(0.506 g) (1 mol/28.0855 g) (6.023 × 10²³ atoms /mol) = 1.08 × 10²² Si atoms

Of these Si atoms, 3.10 percent are Si-30 so,  

= (3.10 / 100) × (1.08 × 10²² atoms) / 1000 = 3.34 × 10²⁰ atoms of Si-30. or 3.4 × 10²⁰ atoms

Which of the following obervations would be classified as a physical change? A) Fireworks releasing light B) Antacid fizzing in water C) Steam condensing on a mirror D) Apple turning brown

Answers

Answer:

C) Steam condensing on a mirror

Explanation:

This was just a change in the physical state.

Which statement BEST describes how a golf club does "work" on a golf ball?
(A) When the club hits the ball the club transfers all of its kinetic energy to the ball.
(B) All of the kinetic energy from the club is transferred to the ball as they both move through the air.
(C)
Some of the kinetic energy from the golf club is transferred to the ball and some transforms into sound
and heat, but the total energy remains the same.
(D) The golf club loses kinetic energy when it hits the ball and the ball gains kinetic energy from the air as it
travels

Answers

Answer:

C

Explanation:

It looks pretty reasonable to me

At 25 °C, what is the hydroxide ion concentration, [OH−] , in an aqueous solution with a hydrogen ion concentration of [H+]=1.9×10−9 M?

Answers

Answer:

The correct answer will be "5.26 × 10⁻⁶".

Explanation:

The given values is:

[tex][H^{+}]=1.9\times 10^{-9} M[/tex]

As we know,

⇒  [tex]pH+pOH=14[/tex]

On taking log, we get

⇒  [tex]-log[H^{+}] + -log[OH^{-}] = 14[/tex]

Now,

Taking "log" as common, we get

⇒  [tex]log[H^{+}][OH^{-}]= -14[/tex]

⇒  [tex][H^{+}][OH^{-}]= 10^{-14}[/tex]

⇒  [tex][OH^{-}]=\frac{10^{-14}}{[H^{+}]}[/tex]

On putting the estimated value of "[tex][H^{+}][/tex]", we get

⇒             [tex]=\frac{10^{-14}}{1.9\times 10^{-9}}[/tex]

⇒             [tex]=5.26\times 10^{-6}[/tex]

What mass of salt would you need to add to 1.00kg of water to achieve a freezing point of -5 degrees C

Answers

Answer:

The type of salt to be added to the water is not known from the question but no worries, I will try to give you the step by step procedure to answer any type of question similar to this.

To answer this question, we should know some facts.

1. the molar freezing point depression constant of water (Kf) = 1.86 K kg/mol

2. the molar mass of the salt if NaCl = 58.5 g/mol ; KCl = 74.5 g/mol

3. since the salt can dissociate if NaCl or KCl into two ions, the Van't Hoff factor ( i )= 2

Note that: the change in freezing point, molarity, deepression constant and van't Hoff factor are related by this formula;

                ΔTf = i Kf m

So lets take NaCl as the salt:

Molar mass = 58.5 g/mol

Van't Hoff factor = 2

1. calculate the number of moles

So we can calculate the molarity of the salt NaCl from the formula;

m = ΔTf / i Kf

m = 5 / 2 * 1.86

m = 5 / 3.72

m = 1.344 mol/kg

2. calculate the number of moles of the salt required

Next is to multiply the molarity by the mass of water. Density of water = 1kg/L

number of moles = 1.344 mol/kg * 1 Kg/L * 1 kg water

number of moles = 1.344 moles.

3. calculate the mass of the salt.

numner of moles = mass / molar mass

mass = number of moles * molar mass

mass = 1.344 * 58.5

mass = 78.624 g of NaCl salt.

You can follow these steps to solve for the type of salt you are given in the question.

The reaction of hydrogen and iodine to produce hydrogen iodide has a Kc of 54.3 at 703 K. Given the initial concentrations of H2 and I2 are 0.453 M, what will the concentration of HI be at equilibrium

Answers

Answer:

[HI] = 0.7126 M

Explanation:

Step 1: Data given

Kc = 54.3

Temperature = 703 K

Initial concentration of H2 and I2 = 0.453 M

Step 2: the balanced equation

H2 + I2 ⇆ 2HI

Step 3: The initial concentration

[H2] = 0.453 M

[I2] = 0.453 M

[HI] = 0 M

Step 4: The concentration at equilibrium

[H2] = 0.453 - X

[I2] = 0.453 - X

[HI] = 2X

Step 5: Calculate Kc

Kc = [Hi]² / [H2][I2]

54.3 = 4x² / (0.453 - X(0.453-X)

X = 0.3563

[H2] = 0.453 - 0.3563 = 0.0967 M

[I2] = 0.453 - 0.3563 = 0.0967 M

[HI] = 2X = 2*0.3563 = 0.7126 M

A 950.0 mL solution of potassium permanganate was made by dissolving 45.0 g KMnO4 in 750.0 mL of water. Assume water has a density of 1.00 g/mL. (Molar Mass for H = 1 , O = 16 , K= 39 , Mn= 55 ) The mole fraction of the solute =

Answers

Answer:

The correct answer is 6.67×10⁻³.

Explanation:

Based on the given question, the amount of solute (KmNO4) is 45 grams. The molecular weight of KmNO4 is 158 gram per mole. The moles of solute can be determined by using the formula,  

n = mass/molecular weight  

n = 45/158 = 0.28  

The amount of solvent (water) given is 750 milliliters, and the density of water is 1 gm. per ml, 18 gram per mole is the molecular weight of water. So, the moles of solvent will be,  

n = 750/18 = 41.7  

The formula for calculating mole fraction is,  

Mole fraction = mole of solute / (mass of solute + mole of solvent)

The mole fraction of solute can be determined by putting the values in the above mentioned formula,  

Mole fraction of KmNO4 = 0.28/(0.28+41.7)

= 0.28/41.98

= 6.67 × 10⁻³ or 7 × 10⁻³.  

Is chemical engineering suits for a person who gets bored fast and needed to learn new things?​

Answers

Answer:

yes

Explanation:

because it will keep them entertained and will learn new things

Consider the following reaction where Kc = 2.90×10-2 at 1150 K: 2 SO3 (g) 2 SO2 (g) + O2 (g) A reaction mixture was found to contain 4.71×10-2 moles of SO3 (g), 5.00×10-2 moles of SO2 (g), and 4.53×10-2 moles of O2 (g), in a 1.00 liter container.

Answers

Answer:

The reaction is not in equilibrium and  must move in a backward manner i.e towards the reactant so that it will attain equilibrium

Explanation:

The complete question is as follows;

Consider the following reaction where Kc = 2.90×10-2 at 1150 K: 2 SO3 (g) 2 SO2 (g) + O2 (g) A reaction mixture was found to contain 4.71×10-2 moles of SO3 (g), 5.00×10-2 moles of SO2 (g), and 4.53×10-2 moles of O2 (g), in a 1.00 liter container.

Is the reaction at equilibrium? If not, what direction must it run in order to reach equilibrium? The reaction quotient, Qc, equals . The reaction A. must run in the forward direction to reach equilibrium. B. must run in the reverse direction to reach equilibrium. C. is at equilibrium.

Solution

The first thing to do here is to calculate the pressure of each of the gases. This would be useful in the equilibrium calculations. We calculate this by dividing the respective number of moles by the volume of the container.

Now, since the volume of the container is 1L, then the number of moles will be equal to the pressure of the gaseous substances, although units will be different.

So, [SO3] = 4.71 * 10^-2 mol/L

[SO2] = 5.00 * 10^-2 mol/L

[O2] = 4.53 * 10^-2 mol/L

The equation of the reaction is as follows;

[tex]2SO_{3(g)}[/tex]    ⇆    [tex]2SO_{2(g)}[/tex]   +    [tex]O_{2(g)}[/tex]

We proceed to calculate the reaction quotient Qc

Mathematically Qc for this reaction = [[tex]SO_{2}[/tex]]^2 × [[tex]O_{2}[/tex]]/ [[tex]SO_{3}[/tex]]^2

Qc = {(5 * 10^-2)^2 * (4.53 * 10^-2)}/ (4.71 * 10^-2)^2 = 5.11 × 10^-2 mol/L

Now, we are given that the value of Kc = 2.9 * 10^-2 which is less than Qc

Since Kc < Qc, the backward reaction is favored.

Now to the question;

The reaction is not in equilibrium and  must move in a backward manner i.e towards the reactant  so that it will attain equilibrium

Two hypothetical ionic compounds are discovered with the chemical formulas XCl2 and YCl2, where X and Y represent symbols of the imaginary elements. Chemical analysis of the two compounds reveals that 0.25 mol XCl2 has a mass of 100.0 g and 0.50 mol YCl2 has a mass of 125.0 g. (a) What are the molar masses of XCl2 and YCl2

Answers

Answer:

THE MOLAR MASS OF XCL2 IS 400 g/mol

THE MOLAR MASS OF YCL2 IS 250 g/mol.

Explanation:

We calculate the molar mass of XCL2 and YCL2 by bringing to mind the formula for molar mass when mass and amount or number of moles of the substance is given.

Number of moles = mass / molar mass

Molar mass = mass / number of moles.

For XCL2,

mass = 100 g

number of mole = 0.25 mol

So therefore, molar mass = mass / number of moles

Molar mass = 100 g / 0.25 mol

Molar mass = 400 g/mol.

For YCL2,

mass = 125 g

number of mole = 0.50 mol

Molar mass = 125 g / 0.50 mol

Molar mass = 250 g/mol.

So therefore, the molar mass of XCL2 and YCL2 IS 400 g/mol and 250 g/mol respectively.

What is the Arrhenius definition of an acid? A substance that increases H3O+ concentration when it is dissolved in water. A substance that increases OH– concentration when it is dissolved in water. A compound that donates protons. A compound that accepts protons.

Answers

Answer:

A substance that increases H3O+ concentration when it is dissolved in water.

Explanation:

Note that H3O+ and H+ are used quite interchangeably in chemistry.

An acid makes the H+ content higher, thereby decreasing the pH.

Answer:

a

A substance that increases H3O+ concentration when it is dissolved in water.

Explanation:

Wax melts when it is heated which most likely describes what is true of the result of this reaction

Answers

Answer:

Was is a hydrocarbon therefore when heated some co2 escapes but later solidifies

Explanation:

Hope it helps

tertbutylamine and ammonia. Which is more basic

Answers

Answer:

ammonia

Explanation:

A gas occupies a volume of 180 mL at 35 °C and 95.9 kPa. What is the volume of the gas at conditions of STP?

Answers

Answer:

the volume of the gas at conditions of STP = 151.04998 ml

Explanation:

Data given:

V1 = 180 ml

T1 = 35°C or 273.15 + 35 = 308.15 K

P1 = 95.9 KPa

V2  =?

We know that at STP

P2 = 1 atm or 101.3 KPa

T2 = 273.15 K

At STP the pressure is 1 atm and the temperature is 273.15 K

applying Gas Law:

[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]

putting the values in the equation of Gas Law:

[tex]V_2=\frac{P_1V_1T_2}{T_1P_2}[/tex]

V_2 =[tex]\frac{95.9\times180\times273.15}{308.15\times101.3}[/tex]

V2 = 151.04998

therefore, V2 = 151.04998 ml

Answer:

151 mL is the correct answer to the given question .

Explanation:

We know that

[tex]PV =n RT[/tex]

Where P =pressure ,V=volume and T=Temperature

Given

P=95.9 kPa.

V=[tex]180 * 10 ^{-3}[/tex]

R=25/3

T=273 + 35 =308k

Putting these value into the equation we get

[tex]95.9\ * 180\ *\ 10^{-3} \ =\ n * \frac{25}{3} * 308[/tex]

n=[tex]6.72 * 10^{-3}[/tex]

Now using the equation

[tex]n= \ \frac{V}{22.4}[/tex]

[tex]6.72 * 10^{-3} =\frac{V}{22.4}\\ V\ =\ 150.6mL[/tex]

This can be written as  151mL

when a car drives down a street, what evergy conversions are happening?

Answers

kinetic energy happens
Kinetic energy happens

Match the following aqueous solutions with the appropriate letter from the column on the right. 1. 0.13 m FeCl3 A. Highest boiling point 2. 0.19 m Mg(CH3COO)2 B. Second highest boiling point 3. 0.30 m KI C. Third highest boiling point 4. 0.53 m Glucose(nonelectrolyte) D. Lowest boiling point An error has been detected in your answer. Check for typos,

Answers

Answer:0.30 m KI ---- A. Highest boiling point

0.19 m Mg(CH3COO)2 ---- B. Second highest boiling point

0.53 m Glucose(nonelectrolyte) ---- Third highest boiling point-C

0.13 m FeCl3---- Lowest boiling point-D

Explanation:

Using the  boilng point elevation formula

ΔTb=m* kb *i

where m= molality

kb= elevated boiling point constant( here kb values will be same for all soluton)

i= vant hoff factor = number of ions present in a solution

Using the  number of ions and molarity present in a solution as a collagative property, since kb is constant, we can determine which of the species has the highest boiling point.

1.) 0.13 m FeCl3= Fe³⁻  + Cl⁻

        i=4

ΔTb=m* kb* i= molarity x number of ionsx Kb= 0.13 x 4= 0.52kb

2) 0.19 m Mg(CH3COO)2 = Mg²⁺ + CH₃COO⁻

i= 3

ΔTb=m* kb* i= molarity x number of ions= 0.19 x 3= 0.57kb

3. 0.30 m KI = K⁺  + I⁻

i= 2

ΔTb=m *kb *= imolarity x number of ions xKb= 0.30x 2= 0.60kb

4. 0.53 m Glucose(nonelectrolyte) =

i= 1 for nonelectroytes

ΔTb=m* kb* i = molarity x number of ionsx Kb= 0.53 x 1= 0.53Kb

therefore,

0.30 m KI ---- A. Highest boiling point

0.19 m Mg(CH3COO)2 ---- B. Second highest boiling point

0.53 m Glucose(nonelectrolyte) ---- Third highest boiling point

0.13 m FeCl3---- Lowest boiling point

dropping an Alka-Seltzer tablet into a glass of water _________________________________________ b. bleaching a stain _________________________________________ c. burning a match _________________________________________ d. rusting of an iron nail

Answers

Answer:

Hi there!

When dropping Alka-Seltzer into a glass of water, bubbles immediately appear and the solid substance “disappears”, dissolves, into the water. This forms a new compound, a liquid, which means a reaction took place.

3. Are all amino acids are chiral? Why or why not? Protein only contain ____ (L-/D-) amino acids. Which organic molecule is the standard molecule for L-/D- configuration system? The chiral carbon in L-Alanine is ______ (R- /S-) configuration, but in D-Alanine is ________ (R-/S-) configuration.

Answers

Answer:

Protein are essential in body cells for the repair of worn out tissues. Amino acid is gotten when protein is broken down under certain conditions.

All amino acids are chiral with the exception of glycine. This means they have a central carbon atom with the R-, -COOH, and -NH2 group attached to it.

Protein contain only L amino acid because the L amino acid is the only type used by cells.

The chiral carbon in L-Alanine is S-configuration and D-Alanine is R-configuration.

The metalloid that has three valence electrons is .

Answers

Answer:

Boron

Explanation:

Answer: a. boron

Explanation: bc the Boron Family is named after the first element in the family. atoms in this family have 3 valence electrons. this family includes a metalloid (boron), and the rest are metals.

What is the rate of a reaction if the value of kis 0.1, [A] is 1 M, and [B] is 2 M?
Rate = K[A]2[B]2
A. 1.6 (mol/L)/s
B. 0.8 (mol/L)/S
C. 0.2 (mol/L)/S
D. 0.4 (mol/L)/S

Answers

Answer:

D.  0.4 (mol/L)/S

Explanation:

You simply have to plug in the given values into the rate law.

Rate = k[A][B]

Rate = (0.1)(1)²(2)²

Rate = (0.1)(1)²(4)²

Rate = 0.4

A sample of thallium(III) peroxide, Tl2(O2)3, contains 2.45 mol of thallium(III) ions. The number of moles of peroxide ions in the sample is

Answers

Answer:

The correct answer is 3.675 moles.

Explanation:

Based on the question, the reaction taking place is,  

Tl₂(O₂)₃ ⇒ 2Tl⁺³ + 3O₂⁻²

Thus, 1 mole of thallium peroxide comprise 2 moles of thallium and 3 moles of peroxide ions.  

However, based on the given question, a sample of thallium peroxide comprise 2.45 moles of thallium ions. The moles of peroxide ions present in the sample will be,  

= 2.45 × 3 / 2

= 3.675 moles.  

Hence, the moles of peroxide ions present in the given sample is 3.675.  

In general,for a gas at a constant volume?

Answers

Answer:

The pressure of a gas is directly proportional to its Kelvin temperature if the volume is kept constant. At constant volume and temperature, the total pressure exerted by a mixture of gases is equal to the sum of the partial pressures of the component gases.

Explanation:

Which of the following are not created by an arrangement of electric charges
or a current (the flow of electric charges)?
A. An electric field
B. A magnetic field
C. A quantum field
D. A gravitational field

Answers

Answer:

gravitational and quantum ARE NOT, but electric and magnetic ARE.    there is a similar question to this but it's the exact opposite, so don't get confused

A student sets up the following equation to solve a problem in solution stoichiometry. (The ? stands for a number the student is going to calculate.) Enter the units of the student's answer

(1.26mol)1mL10^−3L / (7.9mol/L)= ?

Answers

Answer:

mL * L²

Explanation:

The question in t his problem is to calculate the units of the final answer.

The units in the numerator is mol, ml and L.

The unit in the denominator is mol/L

This leads us to;

Numerator / Denominator =  mol * mL * L / (mol / L )

The final units is mL * L²

Hcl and 1-isopropylcyclohexane formation

Answers

Yes I don’t know what this means

Answer:

Spahgetti

Explanation:

Given a K value of 0.43 for the following aqueous equilibrium, suppose sample Z is placed into water such that it’s original concentration is 0.033 M. Assume there was zero initial concentration of either A(aq) or B(aq). Once equilibrium has occurred, what will be the equilibrium concentration of Z?
2A(aq) + B(aq) <> 2Z (aq)

Answers

Answer:

[Z] = 0.00248M

Explanation:

Based in the reaction:

2A(aq) + B(aq) ⇄ 2Z (aq)

K of the reaction is defined as:

K = [Z]² / [A]²[B] = 0.43

If you add, in the first, just 0.033M of  Z, concentrations in equilibrium are:

[Z] = 0.033M - 2X

[A] = 2X

[B] = X

Replacing in K equation:

0.43 = [0.033M - 2X]² / [2X]² [X]

0.43 = [0.033M - 2X]² / [2X]² [X]

0.43 = 4X² -0.132X + 0.001089 / 4X³

1.72X³ - 4X² + 0.132X - 0.001089 = 0

Solving for X:

X = 0.01526M

Replacing, concentration in equilibrium of Z is:

[Z] = 0.033M - 2*0.01526M = 0.00248M

Answer:

Less than 0.033 M

Explanation:

Hello,

In this case, given the equilibrium:

[tex]2A(aq) + B(aq) \rightleftharpoons 2Z (aq)[/tex]

Thus, the law of mass action is:

[tex]K=\frac{[Z]^2}{[A]^2[B]}[/tex]

Nevertheless, given the initial concentration of Z that is 0.033 M, we should invert the equilibrium since the reaction will move leftwards:

[tex]\frac{1}{K} =\frac{[A]^2[B]}{[Z]^2}=2.33[/tex]

Know, by introducing the change  due to the reaction extent, we can write:

[tex]2.33=\frac{(2x)^2*x}{(0.033M-2x)^2}[/tex]

Which has the following solution:

[tex]x_1=2.29M\\x_2=0.0181M\\x_3= 0.0153M[/tex]

But the correct solution is [tex]x=0.0153M[/tex]  since the other solutions make the equilibrium concentration of Z negative which is not possible. In such a way, its concentration at equilibrium is:

[tex][Z]_{eq}=0.033M-2*0.0153M=0.0024M[/tex]

Which is of course less than 0.033 M since the addition of a product shift the reaction leftwards in order to reestablish equilibrium (Le Chatelier's principle).

Regards.

Other Questions
Evaluate 5 4/6 Give your answer as a mixed number in its simplest form. HURRRYYYYYYYA standard number cube with the numbers 1 through 6 is rolled. Find the probability of rolling a number less than 4.A).1/4B).1/3C).1/2D).2/3 What is the volume in cubic units of a cube with a side length of 1/2 unit? Which best explains why the United States was able to remain neutral at the outbreak of hostilities in 1914, while most of Europe went to war? if a number of 721 students enrolled to a school & the number increases by 7%, by the next year how many students will there be? Verify sin^4 x - sin^2 x = cos^4 x - cos^2 x is an identity Deere is a global manufacturer and distributor of agricultural, construction, and forestry equipment. Suppose it reported the following information in its 2017 annual report. (In millions) 2017 2016 Inventories (LIFO) $2,267 $2,999 Current asset 32,910 Current liabilities 11,711 LIFO reserve 1,389 Cost of goods sold 15,661Compute Deere inventory turnover for 2017 ratio. what is the volume of a prism with a height of 4 feet and a base area of 9 square feet? what does western world represent? A study of king penguins looked for a relationship between how deep the penguins dive to seek food and how long they stay underwater. For all but the shallowest dives, there is a linear relationship that is different for different penguins. The study report gives a scatterplot for one penguin titled "The relation of dive duration (DD) to depth (D)." Duration DD is measured in minutes, and depth D is in meters. The report then says, "The regression equation for this bird is: DD = 2.69 + 0.0138D.1. What is the slope of the regression line?2. Explain in specfic language what this slope says about this penguin's dives.A. If the depth of the dive is increased by one meter, it adds 0.0138 minutes to the time spent under water.B. If the depth of the dive is decreased by one meter, it adds 0.0138 minutes to the time spent under water.C. If the depth of the dive is increased by 0.0138 meter, it adds one minute to the time spent under water.3. According to the regression line, how long does a typical dive to a depth of 200 meters last? 4. According to the regression line, how long does a typical dive to a depth of 210 meters last? 5. According to the regression line, how long does a typical dive to a depth of 220 meters last? 6. According to the regression line, how long does a typical dive to a depth of 230 meters last? 7. According to the regression line, how long does a typical dive to a depth of 240 meters last? 8. According to the regression line, how long does a typical dive to a depth of 150 meters last?9. According to the regression line, how long does a typical dive to a depth of 160 meters last?10. According to the regression line, how long does a typical dive to a depth of 170 meters last? 11. According to the regression line, how long does a typical dive to a depth of 180 meters last? 12. According to the regression line, how long does a typical dive to a depth of 190 meters last? Thomlin Company forecasts that total overhead for the current year will be $11,597,000 with 164,000 total machine hours. Year to date, the actual overhead is $7,833,000 and the actual machine hours are 83,000 hours. The predetermined overhead rate based on machine hours is Round the factory overhead rate to the nearest dollar before multiplying by the number of hours. a.$94 per machine hour b.$48 per machine hour c.$71 per machine hour d.$140 per machine hour What is 3x^2-10x-8 fully factored? Helen has only 10 questions left to do of her Math homework. Shehas 120 minutes before it's her bedtime and it takes 5 minutes to doeach Math question. Describe the pattern and determine how muchtime she will have available after her homework is complete.A)Start at 120 and add 5 each time. She will have 70 minutes of free time after she finishes her math questions.B) Start at 120 and subtract 5 each time. She will have 70 minutes of free time after she finishes her math questions.C)Start at 120 and subtract 5 each time. She will have 75 minutes of free time after she finishes her Math questions.D) Start at 120 and subtract 5 each time. She will not have enough time to complete all of her math questions. A probability experiment consists of rolling a fair 16 sided die. Find the probability of the event below, rolling a 12 What are the x-intercepts of y=4x^2-16 An equilateral triangle have always _________ vertex and _______ lines of symmetry. a) (3 , 1) b) ( 4, 0) c) (3 , 3 ) d) (3, 2 ) what is the dungeon like? Pls, help! I really need it! THANKS!! I'm giving 15 points + BRAINLIEST THANK YOU NOW PLS HELP ME Find the value of x using properties of parallel lines. answers: A) 1 B) 8 C) 5 D) 3.5 hows your fav singer