The temperature of a 0.85kg block of copper was found to be 21 degrees the copper was placed in the sun and temperature increased to 28 degrees.Assume the specific heat of copper to be 0.385J/g degrees and determine the amount of heat absorbed by the block of copper.

Answer:

3 ZnS (s) + 2 AIP(s) ---> AI₂S₃(s) +  Zn₃P₂(s)

Explanation:

I believe you are asking for this reaction to be balanced. However, after looking more closely, those are not the products that would be created from the reactants. Assuming this is a double-displacement reaction, and taking the most common charges of the ions into consideration, the actual products would be AI₂S₃(s) + Zn₃P₂(s). I apologize if I assumed incorrectly.

For an equation to be balanced, there needs to be the same amount of each element on both sides of the equation.

The unbalanced equation:

ZnS (s) + AIP(s) ---> AI₂S₃(s) + Zn₃P₂(s)

Reactants: 1 zinc, 1 sulfur, 1 aluminum, 1 phosphorus

Products: 3 zinc, 3 sulfur, 2 aluminum, 2 phosphorus

As you can see, there is an unequal amount of each element on the reactants and products side. To balance the equation, coefficients in front of the compound(s) will be necessary.

The balanced equation:

3 ZnS (s) + 2 AIP(s) ---> AI₂S₃(s) +  Zn₃P₂(s)

Reactants: 3 zinc, 3 sulfur, 2 aluminum, 2 phosphorus

Products: 3 zinc, 3 sulfur, 2 aluminum, 2 phosphorus

Answer:

It depends on how high you are above sea level

Explanation:

I did an experiment in my Scince class that showed, the less air that is around water will lessen it’s boiling level. We put water in a glass beaker inside of our vacuum chamber, we made a vacuum in he chamber. Making a vacuum is like being on a mountain, the less air the lower the boiling point. The water then began to boil due to the water evaporating. When we reached to maximum vacuum that we could the water started to boil at 61°C. No the water was not very hot, it was just warm water that just so happened to also be boiling, cool right!!! Anyways, we played with dry ice the next day.

Hoped this helped.

Hope I earned your star rating or helpful rating from this.

the air pressure around the experiment is lower than at sea level

When 1 mole of Zn and 2 mole of O₂ reacts togethor, It will produce 1 mole of ZnO as O₂ is excess reagent and Zn will act as Limiting reagent and thus it limits the amount of product formed.

Limiting reagents are the substances that are completely consumed first in a chemical reaction.

Given ;

Given equation ;

2Zn + O₂ --> 2ZnO

As according to given chemical equation,

2 moles Zn of reacts with 1 mole of O₂ to produce 2 moles of ZnO.

Therefore,

1 mole of Zn will require 0.5 mole of O₂.

But,

the given amount of O₂ is 2 mole which is excess

Hence,

Zn here will act as the Limiting reagent, According to which the amount of product formed will be decided.

Therefore,

If 2 mole Zn produces : 2 moles of ZnO (According to given balanced equation)

Thus,

1 mole of Zn will produce = 2/2 x 1

                                          = 1 mole of ZnO

Hence, When 1 mole of Zn and 2 mole of O₂ reacts togethor, It will produce 1 mole of ZnO as O₂ is excess reagent and Zn will act as Limiting reagent and thus it limits the amount of product formed.

Learn more about Limiting reagent here ;

https://brainly.com/question/11848702

#SPJ1

Answer:

Solid objects have the least kinetic energy

Explanation:

because solid particles vibrate in place. Gases have the most kinetic energy because their particles move very quickly.

[tex]\quad \huge \quad \quad \boxed{ \tt \:Answer }[/tex]

[tex]\qquad \texttt {Observe a natural phenomenon}[/tex]

____________________________________

[tex] \large \tt Explanation \: : [/tex]

At first scientists/researchers observe a natural phenomenon. after enough observation, they make predictions why that phenomenon is happening and the reasons that lead to that particular phenomenon. then they generate scientific hypothesis to explain that phenomenon and after getting enough data they develop tests and perform experiments. And check the results they get and at last based on the results they conclude what actually is happening.

Answered by : ❝ AǫᴜᴀWɪᴢ ❞

CH3 CH₂OH + 30₂ → 2CO₂ + 3H₂O

Answer: a = 2 ; f = 5 ; b = 2 ; g = 2 ; c = 2 ; h = 2 ; d = 4 ; i = 5 ; e = 3 ; j = 7

Explanation: Some rules to follow while calculating sig figs is

1. If a number like 4500 is present, only two sig figs are counted, but none of the zeros are, but if 4500. has a decimal point present, then you should count all the numbers available.

2. If a number like .0005 is present, only count 5 as a sig fig, however if the number is .00050, count the 0 after the 5 in this example (this would then have two sig figs.

Answer:

chuma ya ndoshi.............

Explanation:

.

kwenda ukalale .............

For all three questions, we will use the fact that

1) For 175 mL of solution at 0.203 M, this means that:

Considering the hydrochloric acid solution, if we have 0.035523 mol, then:

2) If there is 20.3 mL = 0.0203 L, then:

This means that the molarity of the diluted solution is:

3) If we need 1.50 L of 0.700 M solution, then:

Considering the 9.36 M acid solution, from which we need 1.05 mol of perchloric acid from,

In conclusion, modeling is very useful for predicting molecular polarity because chemical bonds among different atoms are generated to equal electrical charges.

Molecular polarity refers to the unequal distribution of electrical charges in the atoms of a molecule.

This unequal distribution leads to the generation of molecular poles (positive and negative) at the ends of the chemical bonds.

In conclusion, modeling is very useful for predicting molecular polarity because chemical bonds among different atoms are generated to equal electrical charges.

Learn more about molecular poles here:

https://brainly.com/question/18649956

#SPJ1

Answer:

Quadruple

Explanation:

Answer:

A

Explanation:

Answer: There is a very large percentage of C-12.

Explanation:

The atomic mass is must closer to that of C-12 than of C-13, meaning that there is a much larger percentage of C-12.

Answer:

Verdadero!
no se en que mas quieres que te ayude? o cual realmente quieres que sea la respuesta?

The problem is not found here but a possible experiment might be to measure the amount of product from a chemical reaction.

An experiment is a procedure used to verify a working hypothesis obtained by applying the scientific method.

Experimental variables that can be tested include, for example, temperature, amount of product from a chemical reaction, etc.

In conclusion, the problem is not found here but a possible experiment might be to measure the amount of product from a chemical reaction.

Learn more about experimentation here:

https://brainly.com/question/17274244

#SPJ1

The Munich Procedural Model is a simple design model that uses the concepts define, optimize, and develop solutions iteratively and in any order. C

The Munich procedural model is a design that illustrates several opportunities regarding the order in which design process and stages beyond mere iteration should take.

A procedural model commonly used for development is the V-model.

Hence, the Munich Procedural Model is a simple design model that uses the concepts define, optimize, and develop solutions iteratively and in any order.

Learn more about procedural designs here:

https://brainly.com/question/22654163

#SPJ1

The rate law uses the molar concentrations of reactants to determine the reaction rate. Hence, option (C) is the correct option

A rate law shows how the rate of a chemical reaction depends on reactant concentration.

For a reaction such as aA → products, the rate law generally has the form

rate = k[A]ⁿ,

where,

Typically, increased concentrations of reactants increases the speed of the reaction, because there are more molecules colliding and reacting with each other.

Hence , The rate law uses the molar concentrations of reactants to determine the reaction rate. Hence, option (C) is the correct option

Learn more about rate law here ;

https://brainly.com/question/4222261

#SPJ1

If a snail crawls at a rate of 228.16cm/s, Its speed in miles per hour will 5.10 miles/hour

The rate at which someone or something moves or operates or is able to move or operate.

Snail covers distance in 1 seconds = 228.16 cm

It covers in 60 seconds (1 min) = 228.16 cm x 60 = 6mtrs

It covers in 60 minutes (1 hour) = 228.16 cm x 60 x 60 = 821376 cm

Now, lets convert cm to miles :

As,                    1 cm = 6.21371 x 10⁻⁶ miles

Thus,     821376 cm = 5.10 miles

hence, If a snail crawls at a rate of 228.16cm/s, Its speed in miles per hour will 5.10 miles/hour

Learn more about speed here :

https://brainly.com/question/22610586

#SPJ1

Answer:

A magic number is a number of nucleons (either protons or neutrons, individually) that form complete bands within the atomic nucleus. As a result, atomic nuclei with a magic number of protons or neutrons are significantly more persistent than other nuclei.

The empirical formula for the compound is [tex]Fe_3PO_4[/tex] if A 8.63 g sample of a compound contains 5.51 g of iron, Fe, 1.02g of phosphorus, P, and oxygen, O.

An empirical formula tells us the relative ratios of different atoms in a compound.

We need to calculate the number of moles:

Given data:

Mass of iron - 5.51 g

Mass of phosphorus -1.02g

Mass of oxygen -2.1 g

Moles of iron - [tex]\frac{mass}{molar \;mass}[/tex]

Moles of iron - [tex]\frac{5.51 g}{56 g/mol}[/tex]

0.098 mole

Moles of phosphorus [tex]-\frac{mass}{molar \;mass}[/tex]

Moles of phosphorus -  [tex]\frac{1.02g}{31 g/mol}[/tex]

0.032 moles

Moles of oxygen -[tex]\frac{mass}{molar \;mass}[/tex]

Moles of oxygen - [tex]\frac{2.1 g}{16 g/mol}[/tex]

0.13moles

Dividing each mole using the smallest number that is divided by 0.032moles.

Fe:P:O :: 3:1:4

The empirical formula for the compound is [tex]Fe_3PO_4[/tex].

Learn more about empirical formula here:

brainly.com/question/14044066

#SPJ1

Answer:

this image represents both a crystalline solid [you can tell because it is clearly a solid, and it has a tightly packed/organized into rows layout}

and a pure element [you can tell this because it is pure--meaning that it is not a mixture (which is why it's not classified as a homogenous mixture instead)]

hope this helps!

Answer:

1 and 4

Explanation:

Pure element because it is made by same type of atom.

Crystalline solid because its structure define it as a solid

The concentration of sodium chloride in the solution is 5.72% (weight/volume percent).

Weight/volume percent concentration (w/v) expresses the amount of solute (in grams) dissolved in a given volume of solution (in milliliters). Specifically, it is defined as the weight of the solute divided by the volume of the solution, multiplied by 100.

To calculate the weight/volume percent concentration, we need to determine the mass of NaCl per volume of the solution.

First, we need to convert the volume of the solution from milliliters (mL) to liters (L):

67.8 mL = 0.0678 L

Next, we calculate the concentration of NaCl in grams per liter (g/L):

Concentration = Mass of solute ÷ Volume of solution

Concentration = 3.88 g ÷ 0.0678 L

Concentration = 57.2 g/L

Finally, we convert the concentration to weight/volume percent by multiplying by 100:

Weight/volume percent = Concentration x 100

Weight/volume percent = 57.2 g/L x 100

Weight/volume percent = 5.72%

Therefore, the concentration of NaCl in the solution is 5.72% (weight/volume percent).

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ1

There is no delay because the effects of gravity are constantly acting on bodies of water. Hence, option D is correct.

Gravitation or just gravity is the force of attraction between any two bodies.

The Moon exerts over twice the gravitational pull of the Sun on Earth's tides because of its proximity to Earth. -The lunar tidal bulges are about twice the size of the solar tidal bulges. -The Sun's contribution to the tides is less than that of the Moon.

When the sun and moon are perfectly unaligned (they form a 90-degree angle relative to the earth), there are still tides because the moon's gravitational gradient is stronger than the sun's. The sun's gravitational gradient never completely cancels out the moon's.

Hence, option D is correct.

Learn more about the gravitational effect here:

https://brainly.com/question/14433868

#SPJ1

A chemical equation is the symbolic representation of a chemical reaction in the form of symbols and formulae, wherein the reactant entities are given on the left-hand side and the product entities on the right-hand side with a plus sign between the entities in both the reactants and the products and an arrow that points towards the products, and shows the direction of the reaction. The coefficients next to the symbols and formulae of entities are the absolute values of the stoichiometric numbers. The first chemical equation was diagrammed by Jeen Beguin in 1615.

A chemical formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes also other symbols, such as parentheses, dashes, brackets, commas and plus and minus signs.

Hope this helps you!

Answer:

Explanation:

Answer: D. The energy needed to change a liquid into a gas

Answer:

It's a Ionic compound

Explanation:

To tell if CaO (Calcium oxide) is ionic or covalent (also called molecular) we look at the Periodic Table that and see that Ca is a metal and O is a non-metal. When we have a metal and a non-metal the compound is usually considered ionic.

Because we have a metal and non-metal in CaO there will be a difference in electronegativity between the metal and non-metal. This difference results in an electron(s) being transferred from the metal (lower electronegativity) to the non-metal (higher electronegativity). The results in the metal becoming a postitive ion and the non-metal a negative ion. The two opposite charges are attracted and form the ionic bond between atoms in Calcium oxide.

Aluminum can be oxidized by [tex]Li^{+}[/tex] and [tex]Ca^{2+}[/tex]

Some of the metal corrodes (or oxidizes) and forms the corresponding metal oxide on the surface as a result of a chemical reaction between the metal surface and the oxygen in the air. The corrosion products that occur in some metals, like steel, are highly apparent and loose.

According to reactivity series (The array of metals in the descending order of their reactivities is referred to as the metals' reactivity series. It is sometimes referred to as the metals in the activity series.)

Lithium and calcium ions are more reactive than aluminum ion and they are less electronegative.

Since silver and tin are more electronegative than aluminum so, they cannot oxidize aluminum.

∴ [tex]Li^{+}[/tex] and [tex]Ca^{+2}[/tex] ions can oxidize aluminum.

Learn more about electronegativity here https://brainly.com/question/16446391

#SPJ10

Answer:

The Red Circles: Liquid, Blue and Yellow Circles: Solid, and Purple Circles: Gas

Explanation:

Should be it based on the picture and given information.

Answer:

According to me end point is the end of a reaction

Answer: Decide whether they have designed the best possible product.