the temperature of a 5.50 l sample of nh3 gas is 22 oc. what will be the resulting temperature in kelvin if the volume is reduced to 3.40 l at constant pressure?

Answer:

The EF of the compound is CH2O and the MF is C6H12O6.

Explanation:

To find the empirical formula (EF) of the compound, we need to determine the simplest whole number ratio of the atoms in the compound. We can assume we have 100 g of the compound, which means we have:

40 g of carbon

6.67 g of hydrogen

53.33 g of oxygen (since the rest of the compound is oxygen)

Next, we can convert the masses to moles:

Moles of carbon = 40 g / 12.01 g/mol = 3.33 mol

Moles of hydrogen = 6.67 g / 1.01 g/mol = 6.61 mol

Moles of oxygen = 53.33 g / 16.00 g/mol = 3.33 mol

We then divide each of the mole values by the smallest number of moles, which is 3.33, to get the simplest whole number ratio:

Carbon: 3.33 / 3.33 = 1

Hydrogen: 6.61 / 3.33 = 1.98 (rounded to 2)

Oxygen: 3.33 / 3.33 = 1

So the EF of the compound is CH2O.

To find the molecular formula (MF), we need to know the molecular mass of the EF. The empirical formula mass (EFM) of CH2O is:

EFM = (1 x 12.01 g/mol) + (2 x 1.01 g/mol) + (1 x 16.00 g/mol) = 30.03 g/mol

We can then calculate the molecular formula mass (MFM) by dividing the given molecular mass (180 g/mol) by the EFM:

MFM = 180 g/mol / 30.03 g/mol = 6

This means the MF is 6 times the EF, or C6H12O6. Therefore

Comparing the four solutions above, the vapour pressure of a 0.4 M CH4 (methane) solution is lowest. This is due to the fact that a solution's vapour pressure is directly inversely proportional to the mole fraction of the solvent.

When the rate of evaporation and condensation are equal, the pressure that a substance's vapour exerts in a closed container is referred to as vapour pressure. It is an indicator of a substance's propensity to evaporate and is influenced by variables including temperature, surface area, and intermolecular forces. A substance with a higher vapour pressure will evaporate more quickly than a substance with a lower vapour pressure at a given temperature. Chemistry, physics, and material science are just a few of the scientific and engineering disciplines where vapour pressure is an important feature. It has significant effects on how liquids and gases behave, including boiling temperatures, distillation, and phase transitions.

Learn more about  vapour pressure here:

https://brainly.com/question/14123284

#SPJ4

The large display can show readings in an extended range from -2.0 to 16.0 pH and temperature from 0°C to 90°C. It can also simultaneously display both of these values so that users can easily compare them.

This means it can display the pH and temperature values of a wide range of solutions and other substances. It can also simultaneously display both of these values so that users can easily compare them. This can be useful for monitoring and analyzing changes in pH or temperature over time, or for analyzing the relationship between pH and temperature.

To know more about pH please refer:

https://brainly.com/question/15289741

#SPJ4

The compound interest for two months will be $13.98. Then, after two months, there will be $ 4213.98 in the account.

Compound interest is the interest on normal interest. Compound interest for an amount p for a n years with a rate of interest R% can be calculated as follows:

A  = P [1 + r/100]ⁿ

Given that, the amount  p = $4200

rate of compound interest  = 2.1 %

time period n = 2 months, it is 0.16 years.

Now the compound interest for two months = $ 4200× [1 + 2.1/100]^0.16 - $4200 = $13.98

Now, the amount after two months will be $ 4213.9.

Therefore, there will be $4213.9 in the account after two months.

Find more on compound interest :

https://brainly.com/question/26457073

#SPJ1

24 g of pure CO2 are exhaled by the individual. To calculate the number of moles, divide the outcome by the molar mass. As a result, the individual exhales about 0.55 moles of carbon dioxide every hour.

During aerobic cellular respiration, the interaction of glucose and oxygen results in the production of ATP that the cell can utilize.

As by-products, water and carbon dioxide are produced. The general formula for aerobic cellular respiration is: During cellular respiration, oxygen and glucose combine to create ATP.

CO2 is converted to glucose during photosynthesis, and H2O is oxidized to produce oxygen. Cellular respiration involves the reduction of oxygen and the oxidation of glucose to produce CO2 and water.

CO2 is carried by the bloodstream to the lungs, where it is eventually exhaled out of the body.

Therefore, Hence Number of moles glucose, C6H12O6 = 100g/180g = 0.55 moles.

Learn more about glucose here:

https://brainly.com/question/8394646

#SPJ1

The change in enthalpy (Δh) between the initial and final state is [tex]-48270 kJ[/tex]

The change in enthalpy (Δh) between the initial and final state can be calculated using the following equation:

Δ[tex]h = m (h2 - h1)[/tex]

where m is the mass of water vapor, h1 is the enthalpy of the initial state and h2 is the enthalpy of the final state.

Since the initial state is at 300 kPa and 200°C, the enthalpy of the initial state (h1) can be calculated using the steam tables. From the steam tables, the enthalpy of the initial state (h1) is 2760 kJ/kg.

The final state is at 175 kPa and a quality of 50%. The enthalpy of the final state (h2) can also be calculated using the steam tables. From the steam tables, the enthalpy of the final state (h2) is 1703 kJ/kg.

Now, the mass of water vapor (m) in the closed piston-cylinder device can be calculated using the ideal gas law equation.The following equation is the ideal gas law:

[tex]PV = mRT[/tex]

where R is the gas constant, T is the temperature, V is the volume, m is the mass, and P is the pressure.

Since the volume of the closed piston-cylinder device is 5 liters and the temperature is 200°C, the mass of the water vapor (m) can be calculated as follows:

[tex]m =\frac{ (300 kPa * 5 liters)}{ (0.287 *323.15 K)}[/tex]

Therefore, the mass of the water vapor (m) is 41.6 kg.

Finally, the change in enthalpy (Δh) between the initial and final state can be calculated using the equation given above. Thus,

Δ[tex]h = 41.6 (1703 - 2760) = -48270 kJ[/tex]

Therefore, the change in enthalpy (Δh) between the initial and final state

is [tex]-48270 kJ[/tex].

learn more about enthalpy Refer:brainly.com/question/13996238

#SPJ4

Soil can be conserved by removing trees. This statement is false.

Soil conservation is a set of practices used to keep soil from deteriorating. To begin with, soil conservation entails treating the soil as a living ecosystem. This entails continuously returning organic matter to the soil. Preventive maintenance on a car is analogous to soil conservation.

Organic or ecological farming entails reducing or eliminating the use of synthetic fertilizers and pesticides, as well as cultivating rich, long-term balanced soil fertility through techniques such as crop rotation, conservation tillage, and soil amendments such as compost and manure.

Thus,  Soil can be conserved by removing trees. This statement is false.

To learn more about the soil conservation, follow the link;

https://brainly.com/question/30333660

#SPJ1

An ionic compound will dissolve when the attraction between the polar molecules and the ions is greater than the attraction between the ions themselves.

Polar motes A polar patch is generally formed when the one end of the patch is said to retain more positive charges and whereas the contrary end of the patch has negative charges, creating an electrical pole. When a patch is said to have a polar bond, also the centre of the negative charge will be on one side, whereas the centre of positive charge will be in the different side. The entire patch will be a polar patch.

Ion, any snippet or group of tittles that bears one or further positive or negative electrical charges. appreciatively charged ions are called cations; negatively charged ions, anions. Ions are formed by the addition of electrons to, or the junking of electrons from, neutral tittles or motes or other ions.

Learn more about Ionic compound:

https://brainly.com/question/29348041

#SPJ4

The net ionic equation for the given reaction is KCO₃ + MgCl₂---->MgCl₂ + KCl.

When aqueous solutions of potassium carbonate and magnesium chloride are combined, solid magnesium carbonate and a solution of potassium chloride are formed,then

KCO₃ + MgCl₂---->MgCl₂ + KCl. will form.

Like a molecular equation, which communicates compounds as particles, an ionic equation is a synthetic equation where the electrolytes in fluid arrangement are communicated as separated particles. Normally, this is a salt broken down in water, where the ionic species are trailed by (aq) in the situation to demonstrate they are in fluid arrangement.

The particles in fluid arrangements are balanced out by particle dipole cooperations with water atoms. Nonetheless, an ionic equation might be composed for any electrolyte that separates and responds in a polar dissolvable. In a fair ionic condition, the number and sort of particles are similar on the two sides of the response bolt. Furthermore, the net charge is similar on the two sides of the situation.

Solid acids, solid bases, and dissolvable ionic equations (typically salts) exist as separated particles in fluid arrangement, so they are composed as particles in the ionic condition.

To know more about ionic equation,visit here:

https://brainly.com/question/15466794

#SPJ4

Slime is a non-Newtonian fluid and does not have a molecular structure that can be considered polar or non-polar. The term "polarity" typically refers to the distribution of electrical charge within a molecule. In the case of slime, the material is made up of polymer molecules, which are long chains of repeating units. These polymer molecules interact with each other through hydrogen bonding, which gives the material its unique properties such as being a non-Newtonian fluid. However, these interactions are not based on polarity, so it is not appropriate to describe slime as being polar or non-polar.

Answer:

The polarity of slime molecules depends on the specific type of slime. There are many different types of slime, each made up of different types of molecules.

For example, if we consider a typical type of slime made from polyvinyl alcohol (PVA), the polarity of the PVA molecules will depend on their molecular structure and the type of bonding between the atoms. PVA is a synthetic polymer made up of repeating units of vinyl alcohol, which has a polar hydroxyl group (-OH). As a result, PVA is considered to be a polar molecule.

However, the overall polarity of a slime made from PVA will also depend on the other ingredients that are present, such as borax, which is often used as a cross-linking agent to form the slime. The overall polarity of the slime will also depend on the conditions it is in, such as the temperature, pH, and the presence of other substances that could affect the polarity of the slime.

In summary, the polarity of slime molecules can be complex and depends on the specific type of slime, the ingredients that make it up, and the conditions it is in.

Explanation:

Just tell me if you kinda confuse

ALLEN

Answer:

Arrhenius defined an acid as a substance that dissociates in water to produce hydrogen ions (H+) as the sole cation.

Explanation:

Tell me if you still confuse

ALLEN

Today was a difficult day. The sun's rays seemed to beat down on us like never before - the heat was unbearable.

What do you mean by the ozone layer?

The ozone layer is a region of Earth’s atmosphere located in the stratosphere, between 10 and 30 km above Earth’s surface. It is composed of ozone molecules, which are made up of three oxygen atoms (O3). The ozone layer acts as a shield, blocking most of the ultraviolet radiation from the sun. This helps protect life on Earth from the harmful effects of UV radiation.

I can only imagine what life would be like without the ozone layer. Without the ozone layer protecting us, we are exposed to the damaging rays of the sun, including UV radiation.

The air quality is also much worse. With the ozone layer gone, there would be a huge increase in the amount of pollution in the air, leading to much more severe health issues for people than we currently experience.

It's also getting harder and harder to grow food. With the depletion of the ozone layer, crops are being destroyed by the intense heat, leaving us with much less food than we used to have.

It's a struggle to get through each day without the ozone layer. I miss the days when I could go outside and be comfortable, rather than feeling like I'm suffocating from the heat.

It's so hard to see the world suffer from the lack of an ozone layer. I can only hope that something is done soon to save us from this reality.

To know more about the ozone layer,

https://brainly.com/question/833767

#SPJ1

5 moles of oxygen reacting with excess hydrogen will produce 180.15 g of water.

Hard water contains high levels of dissolved minerals, primarily calcium and magnesium ions. Water picks these minerals up as they pass through rocks, soil, and other natural materials.

Soft water is generally preferred for chemical reactions because it does not contain highly dissolved minerals. Hard water, however, can react with certain chemicals and interfere with the desired chemical reactions.

The balanced chemical equation for the reaction between oxygen and hydrogen to form water is 2H2 + O2 -> 2H2O.

The molar mass of water (H2O) is estimated to be 18.015 g/mol. Therefore, the mass of 10 moles of water will be 10 mol x 18.015 g/mol = 180.15 g

Therefore, 5 moles of oxygen reacting with excess hydrogen will produce 180.15 g of water.

To learn more about moles, visit here:

https://brainly.com/question/14357742

#SPJ1

The molar mass and the mole ratio from the reaction equation B. 305.9 grams Al2O3

Molar mass is a physical property of a chemical compound, defined as the mass of a given substance divided by the amount of substance measured in moles. It is expressed in g/mol and is numerically equal to the average atomic weight of the atoms in the compound. Molar mass is used to calculate the mass of a given amount of a substance, as well as to determine the relative atomic mass of an element.

The molar mass of aluminum is 26.98 g/mol, and the molar mass of aluminum oxide is 101.96 g/mol. Using the molar mass and the mole ratio from the reaction equation, we can calculate the amount of Al2O3 produced.
6.000 mol Al x (2 mol Al2O3/3 mol Al) x (101.96 g Al2O3/1 mol Al2O3) = 305.9 g Al2O3

To learn more about molar mass
https://brainly.com/question/837939
#SPJ1

The molar ratio of Mg reacted to H2 produced is 1:1. This means that for every mole of Mg that reacts, one mole of H2 is produced. The stoichiometric ratio between the Mg ribbon reactant and the hydrogen gas product is also 1:1.

This ratio is determined by the balanced chemical equation for the reaction between Mg and HCl, which is Mg + 2HCl → MgCl2 + H2. The coefficients in this equation represent the number of moles of each reactant and product that are involved in the reaction. The coefficient for Mg is 1, indicating that one mole of Mg reacts with two moles of HCl to produce one mole of H2 and one mole of MgCl2.

The stoichiometric ratio is important because it allows us to determine the number of reactants or products needed in a reaction. For example, if we know the amount of Mg we have, we can use the stoichiometric ratio to calculate the amount of H2 that will be produced. Similarly, if we know the amount of H2 we need, we can use the stoichiometric ratio to determine how much Mg we need to react with HCl to produce the required amount of H2.

Learn more about stoichiometric ratio

brainly.com/question/28297916

#SPJ4

The 40%  is the percentage of oxygen in the vessel.

What is pressure ?

As force applied per unit area, pressure is defined. P=FA, where F is the force operating perpendicular to the surface area A, gives it mathematical expression. The pascal (Pa), which equates to a newton per square metre (N/m 2), is the accepted unit of pressure.

What is partial pressure ?

The idea of partial pressure arises from the fact that each individual gas contributes a portion of the total pressure, and that portion is the partial pressure of that gas. In order to describe all the pieces, it is essentially like taking a percentage or fraction of the whole.

Therefore, The 40%  is the percentage of oxygen in the vessel.

Learn more about pressure from the given link.

https://brainly.com/question/28012687

#SPJ1

Answer:

0.225 moles

Explanation:

Looking at the balanced equation, 4 moles of Fe(s) react with 3 moles of [tex]O_{2}[/tex](g) to produce 2 moles of [tex]Fe_{2}O_{3}[/tex](s). In other words, for every 3 moles of [tex]O_{2}[/tex] (g) used, there are 2 moles of product [tex]Fe_{2}O_{3}[/tex](s). The mole ratio is therefore 3:2. In other words, you  the moles of [tex]O_{2}[/tex] by [tex]\frac{3}{2}[/tex] to find the moles of product.

There are 0.15 moles of [tex]O_{2}[/tex], so the moles of product should be  3/2 of this according to the molar ratio.

0.15 * [tex]\frac{3}{2}[/tex] = 0.225

Your answer is 0.225 moles.

Hope this helps!

The sodium ion concentration in the cytoplasm of a neuron increases when its sodium channels open.

This is because the opening of the sodium channels allows for the influx of sodium ions into the cytoplasm, leading to an increase in the content-loaded sodium ion concentration within the cell. As a result, the cytoplasm becomes more positively charged, which can lead to the generation of an action potential and the transmission of a nerve impulse.

The sodium channel itself is the membrane protein that conducts sodium ions (Na⁺) through a cell membrane. It is highly selective to transport sodium ions, which it achieves by encapsulation of the ion in a cavity of a larger molecule.

Learn more about sodium channels at https://brainly.com/question/15905781

#SPJ11

The process requires more energy: is completely vaporizing 1 kg of saturated liquid water at 1 atm pressure.

The The process requires more energy: is completely vaporizing 1 kg of saturated liquid water at 1 atm pressure. This is because  from the latent heat of vaporization of the each system. For the system 1, saturated the water at 1 atm, the latent heat of vaporization is equal to 40.7 kJ per mole and for, at 8 atm, the latent heat of vaporization is equal to 36.4 kJ per mole.

Thus, the completely vaporizing 1 kg of saturated liquid water at 1 atm pressure requires the more energy.

To learn more about saturated here

https://brainly.com/question/12976073

#SPJ4

Option (b) is correct. Functional group describes a special combinations of atoms that attach to hydrocarbon chains and rings to form organic nutrients.

Functional groups are classified as any of numerous combinations of atoms that form parts of chemical molecules that undergo characteristic reactions themselves. In many cases it influence the reactivity of the remainder of each molecule. The concept of functional groups is useful as a basis for classification of large numbers of compounds according to their reactions. Some examples of the common functional groups are hydroxyl present in alcohols and phenols, carboxyl present in carboxylic acids, carbonyl present in aldehydes, ketones and quinones. In a simple way it is defined as an atom or group of atoms within a molecule that has similar chemical properties whenever it appears in various compounds even if other parts of the molecule are quite different.

To learn more about Functional group please visit:

https://brainly.com/question/27879244

#SPJ4

The complete question is,

which of the following best describes a functional group?

multiple choice question.

(a) large molecules comprised of a glycerol and three fatty acid chains

(b) special combinations of atoms that attach to hydrocarbon chains and rings to form organic nutrients

(c) molecules that are composed of hydrogen and carbon in a long chain or ring-like structure

(d) large molecules composed of two or more repeating smaller units

Calculate the amount of 0.1 M PMSF required to make a final concentration of 1 mM in 200 ml of extraction buffer: 1 mM = 0.001 M moles of PMSF = 0.001 M x 0.2 L = 0.0002 moles volume of 0.1 M PMSF required = moles / molarity = 0.0002 moles / 0.1 M

To make 200 ml of extraction buffer with the desired concentrations, we need to calculate the amounts of each stock solution that we need to add. Here are the steps to follow:

Calculate the amount of 1 M Tris base required to make a final concentration of 10 mM in 200 ml of extraction buffer:

10 mM = 0.01 M

moles of Tris = 0.01 M x 0.2 L = 0.002 moles

volume of 1 M Tris base required = moles / molarity = 0.002 moles / 1 M = 0.002 L or 2 ml

Therefore, add 2 ml of 1 M Tris base to the solution.

Calculate the amount of 1 M HCl required to adjust the pH to 7.4:

The pH of the 1 M Tris solution is approximately 12.1. To adjust the pH to 7.4, we need to add HCl to the solution. The amount of HCl required can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pKa is the dissociation constant of Tris (8.1), [A-] is the concentration of Tris- (which is the same as the concentration of HCl we will add), and [HA] is the concentration of the protonated form of Tris.

Rearranging the equation, we get:

[A-]/[HA] = 10²(pH - pKa)

Substituting the values, we get:[HCl]/[Tris+] = 10²(7.4 - 8.1) = 0.158

[Tris+] = 0.01 M (since we are aiming for a 10 mM Tris concentration)

Solving for [HCl], we get:

[HCl] = 0.158 x 0.01 M = 0.00158 M

moles of HCl required = 0.00158 M x 0.2 L = 0.000316 moles

volume of 1 M HCl required = moles / molarity = 0.000316 moles / 1 M = 0.000316 L or 0.32 ml

Therefore, add 0.32 ml of 1 M HCl to the solution to adjust the pH to 7.4.

Calculate the amount of 0.2 M 2-mercaptoethanol required to make a final concentration of 1 mM in 200 ml of extraction buffer:

1 mM = 0.001 M

moles of 2-mercaptoethanol = 0.001 M x 0.2 L = 0.0002 moles

volume of 0.2 M 2-mercaptoethanol required = moles / molarity = 0.0002 moles / 0.2 M = 0.001 L or 100 µl

Therefore, add 100 µl of 0.2 M 2-mercaptoethanol to the solution.

1 mM = 0.001 M

moles of PMSF = 0.001 M x 0.2 L = 0.0002 moles

volume of 0.1 M PMSF required = moles / molarity = 0.0002 moles / 0.1 M

learn more about concentration here:

https://brainly.com/question/10725862

#SPJ4

Hi there, here's your answer:

Given the velocity of the dog v = 6.0 m/s

Momentum of the dog P = 60.0 kg m/s

To find:
The mass of the dog.

Solution:

We know that the formula for finding the momentum given the mass of a body and it's velocity is P = m × v.

Substituting the values, we get 60.0 = m × 6.0

Therefore, [tex]m = \frac{60.0}{6.0} = 10kg[/tex]

Thus, the mass of the dog is 10kg.

Hope it helps! Please mark as Brainliest!

The pressure values for propane and butane after each addition of water were not always the same.

This is due to the fact that the vapor pressure of a liquid is directly related to its boiling point. Propane has a boiling point of -42.1°C, whereas butane has a boiling point of 0.5°C. This means that at a given temperature, propane will have a higher vapor pressure than butane, resulting in higher pressure values when the same amount of water is added to each gas. This can be expressed mathematically by the Clausius-Clapeyron equation, which states that the vapor pressure of a liquid is directly proportional to its temperature.

learn more about butane Refer:brainly.com/question/29147540

#SPJ4

The formula for Iron (III) oxide is Fe2O3, which means that there are 2 iron atoms and 3 oxygen atoms in one molecule of Fe2O3.

What do you mean by molecules?

A molecule is a group of two or more atoms held together by chemical bonds. These atoms can be of the same or different types. Molecules are the smallest units of a compound that retain the chemical and physical properties of that compound.

Molecules play a critical role in many chemical reactions and biological processes. They can interact with each other through chemical reactions to form new compounds or release energy. Understanding the structure and behavior of molecules is fundamental to understanding many fields of science, including chemistry, biochemistry, and materials science.

The formula for Iron (III) oxide is Fe2O3, which means that there are 2 iron atoms and 3 oxygen atoms in one molecule of Fe2O3.

To find the number of moles of oxygen atoms in 1 mole of Fe2O3, we need to multiply the number of oxygen atoms per molecule by the Avogadro constant (6.022 x 10^23).

Number of moles of oxygen atoms in 1 mole of Fe2O3 = 3 x (6.022 x 10^23) = 1.8066 x 10^24

Therefore, there are 1.8066 x 10^24 oxygen atoms in 1 mole of Fe2O3.

Learn more about moles of oxygen click here:

https://brainly.com/question/29499360

#SPJ1

The mass (in grams) of H₂ gas produced when 14.3 g of aluminum dissolves in the acid is 1.6 g

First, we shall determine the reacting mass of Al and the mass of H₂ produced from the balanced equation. This is shown below

2Al(s) + 3H₂SO₄(aq) -> Al₂(SO₄)₃(aq) + 3H₂(g

From the balanced equation above,

54 g of Al reacted to produce 6 g of H₂

Finally, we shall determine the mass of H₂ produced when 14.3 g aluminum, Al dissolves. Details below:

From the balanced equation above,

54 g of Al reacted to produce 6 g of H₂

Therefore,

14.3 g of Al will react to produce = (14.3 × 6) / 54 = 1.6 g of H₂

Thus, the mass of H₂ produced is 1.6 g

Learn more about mass:

https://brainly.com/question/9526265

#SPJ1

Complete question:

Sulfuric acid dissolves aluminum metal according to the following reaction:

2Al(s) + 3H₂SO₄(aq) -> Al₂(SO₄)₃(aq) + 3H₂(g)

Suppose you wanted to dissolve an aluminum block with a mass of 14.3g. How many grams of H₂ gas would be produced by the complete reaction of the aluminum block?

Answer:

The Lewis structure for potassium chloride (KCl), which is an ionic compound, cannot be represented by a single Lewis structure. Ionic compounds do not have a covalent bond, instead they have an electrostatic attraction between positive and negative ions. In the case of potassium chloride, potassium (K) has a charge of +1 and chloride (Cl) has a charge of -1. The ionic compound can be represented by showing the positive and negative ions next to each other, separated by a dash or an arrow, like this:

K+ Cl-

Explanation:

Alternatively, it can be represented by a crystal lattice structure, which shows the repeating pattern of positive and negative ions in the solid compound.

The current atmospheric concentration of carbon dioxide is 40 in 250 years ago

Long-term changes to weather patterns and temperatures are a result of climate change.

The use of fossil fuels (such as coal, oil, and gas), which release heat-trapping gases, has been the primary cause of climate change since the 250s, despite the fact that these changes are natural.

Global warming is the long-term increase in the planet's average temperature.

Even while there has been a long-term warming trend, the usage of fossil fuels over the past century has caused the pace of acceleration to increase.

The usage of fossil fuels has expanded along atmospheric concentration  with the global population.

Learn more about atmospheric concentration here

https://brainly.com/question/25312838

#SPJ4

The total amount of heat required to evaporate hundred gram of liquid Ammonia at its boiling point is found to be 28 KJ.

The enthalpy of vaporization from liquid ammonia is given to be 4.8 kilo joule per mole.

The mass of the liquid ammonia is 100 grams.

The formula to find the amount of heat required to evaporate this ammonia is given by,

Q = nL

Where, m is the moles of ammonia and L is the latent heat of vaporization.

Putting all the values,

Q = 100/17 x 4.8 KJ/mol

Q = 28 KJ

So, a total of 28 kilo joules of energy will be required to evaporate these ammonia.

To know more about heat of vaporization, visit,

https://brainly.com/question/26306578#:~:text=Expert%2DVerified%20Answer&text=The%20heat%20absorbed%20by%20the,vaporize%201%20gram%20of%20liquid.

#SPJ4

0.0174 M is the calculated [H₃O+] for 0.0087 M H₂SO₄.  Molarity is an important concept in chemistry.

Molarity, which is defined as the number of moles of solute dissolved per liter of solution, is a measure of a solution's concentration. It is often written with the symbol "M" and is measured in moles per liter (mol/L) units.

The molarity of a solution is determined by dividing the volume of the solution in liters by the number of moles of the solute present in that volume. because it allows us to quantify the amount of substance present in a solution. It is frequently used in stoichiometric calculations to determine the amounts of a chemical reaction's reactant and product that should be known. For instance, if a solution contains 2 moles of solute dissolved in 1 liter of solution, the molarity of the solution is 2 mol/L.

Because it fully dissociates in water, H₂SO₄ is a powerful acid that produces two H+ ions for every molecule that dissociates. As a result, the [H₃O+] in a solution of 0.0087 M H₂SO₄ is twice as molten as the H₂SO₄ solution: [H₃O+] = 2 x [H+] = 2 x 0.0087 M = 0.0174 M.

Accordingly, the [H₃O+] of a H₂SO₄ solution containing 0.0087 M is 0.0174 M.

Learn more about Molarity:

brainly.com/question/14469428

#SPJ1