the temperature of an ideal gas in a sealed 0.60m^3 container is reduced from 440 k to 270 k. the final pressure did the gas is 40kpa. the molar heat capacity at constant volume of the gas is 28.0j/mol•k. what is the work done by the gas?

We have to know that the speed is the ratio of the distance to the time and that the speed is a scalar quantity. We are going to apply the concept of the speed here.

The SI unit of speed is meters per second (m/s). Other common units of speed include kilometers per hour (km/h) and miles per hour (mph).

Speed = Distance/Time

Distance = Speed * Time

= 120 seconds * 8.3 m/s

= 996 m/s

The time that is taken so as to travel 3 Km at this speed is

Time = Distance/Speed

Time = 3000 m/996 m/s

= 3 s

Learn more about speed:https://brainly.com/question/13263542

#SPJ1

Answer:

formula of aluminum oxide Al₂O₃

Since the wire is perpendicular to the magnetic field thus

F=I {l{B}

Force on current carrying wire due to magnetic field is given as

[tex]\vec{F}=I (\vec{l}\times \vec{B})=I lB\sin\theta[/tex]

Since the wire is perpendicular to the magnetic field thus

F=I {l{B}

Let's check the options

If we change the angle between the current flow and the magnetic field from 90 to 75 or 60 degrees, F doesn't become 1/4 of its initial value. Hence options (d) & (e) is incorrect options.

Now if we decrease the current to 1/8 and increase the magnetic field to 4 times then force F becomes 1/2. Therefore option (a) is the incorrect option.

If we decrease the field to B/2 then the force becomes F/2.

Therefore (c) is also an incorrect option.

We are only left with option (b) which is the correct option.

Read more about magnetic field here:

https://brainly.com/question/7802337

#SPJ1

Answer:

1. Visual Impairment: People with visual impairments, including blindness, may find it difficult or impossible to access printed media. This can be due to the small size of text, lack of contrast between the text and background, or other formatting issues that make it difficult to read.

2. Physical Disability: Individuals with physical disabilities that affect their mobility, such as paralysis or tremors, may find it difficult to hold and manipulate printed media, such as books or magazines.

3. Literacy Levels: People who struggle with literacy or have limited reading skills may find it difficult to access printed media. This can be due to the complexity of the language used, or the lack of materials available in their native language.

Ohm's law states that the voltage (V) over a resistor is break even with to the item of the current (I) streaming through it and its resistance (R), or V = I*R.

To discover the resistance required to have an amperage of 7.0 A with a voltage supply of 210 V, able to improve the condition to unravel for R:

R = V/I

Stopping within the values we know:

R = 210 V / 7.0 A

R = 30 ohms

Subsequently, the understudy will require a resistance of 30 ohms to attain an amperage of 7.0 A with a voltage supply of 210 V.

Learn more about ohms law

https://brainly.com/question/14296509

#SPJ1

Answer:

Explanation: To solve this problem, we can use the equation for the force on a current-carrying conductor in a magnetic field:

F = I L x B

where F is the force on the conductor, I is the current flowing through the conductor, L is the length of the conductor, and B is the magnetic field strength.

a) Just after the switch is closed, the circuit is completed and a current starts to flow in the bar. The emf of the battery causes a current to flow in the circuit, which is given by Ohm's Law:

I = V / R = 12 / 5 = 2.4 A

The direction of the current is from the battery, through the bar, and back to the battery. Since the magnetic field is directed into the plane, the force on the bar is perpendicular to both the magnetic field and the current. Therefore, the bar experiences a sideways force that pushes it along the rails. The magnitude of the force is given by:

F = I L B = 2.4 x 0.36 x 2.4 = 2.0736 N

The mass of the bar is 0.90 kg, so the acceleration of the bar is:

a = F / m = 2.0736 / 0.90 = 2.304 m/s^2

Therefore, the acceleration of the bar just after the switch is closed is 2.304 m/s^2.

b) When the bar's speed is 2.0 m/s, the force on the bar is still given by:

F = I L B = 2.4 x 0.36 x 2.4 = 2.0736 N

However, now there is an additional force acting on the bar due to its motion through the air. This force is given by:

F_air = -0.5 ρ C_d A v^2

where ρ is the density of air, C_d is the drag coefficient, A is the cross-sectional area of the bar, and v is the speed of the bar. We can estimate the cross-sectional area of the bar as A = 0.01 m^2, and assume that the drag coefficient is C_d = 1. The density of air is ρ = 1.2 kg/m^3.

Substituting the given values, we get:

F_air = -0.5 x 1.2 x 1 x 0.01 x 2^2 = -0.024 N

The negative sign indicates that the air resistance is acting in the opposite direction to the motion of the bar.

The net force on the bar is therefore:

F_net = F + F_air = 2.0736 - 0.024 = 2.0496 N

Using Newton's Second Law, we can calculate the acceleration of the bar:

a = F_net / m = 2.0496 / 0.90 = 2.2778 m/s^2

Therefore, the acceleration of the bar when its speed is 2.0 m/s is 2.2778 m/s^2.

c) The bar's terminal speed is reached when the air resistance force is equal in magnitude and opposite in direction to the force due to the magnetic field. At this point, the net force on the bar is zero, so the acceleration is zero and the bar moves at a constant speed.

Setting F_net = 0, we can solve for the terminal speed:

F + F_air = 0

I L B - 0.5 ρ C_d A v^2 = 0

2.4 x 0.36 x 2.4 - 0.5

ρ C_d A v^2 = 2.0736

v^2 = (2.0736) / (ρ C_d A)

v^2 = (2.0736) / (1.2 x 1 x 0.01)

v^2 = 172.8

v = sqrt(172.8)

v = 13.142 m/s

Therefore, the bar's terminal speed is 13.142 m/s.

While the use of parentheses to indicate the number of a particular group of atoms in a compound can be helpful, it is not strictly necessary for writing a correct chemical formula.

There are several rules that should be followed when writing chemical formulas, but one of the unnecessary rules is the use of parentheses to indicate the number of a particular group of atoms in a compound. For example, the formula for magnesium carbonate can be written as MgCO₃ or as Mg(CO₃)₂, where the parentheses indicate that there are two carbonate ions present.

While the use of parentheses can make it clearer which group of atoms is being referred to, it is not necessary for writing a correct chemical formula. The number of each type of atom in the compound can be determined from the compound's name or from knowledge of the properties of the elements involved.

To know more about chemical formulas, here

brainly.com/question/31713710

#SPJ1

The range in pressure differences required to measure the flow rates of 0.002 and 0.02 m^3/s is approximately 2,710.62 Pa.

The pressure difference across a venturi meter is given by the Bernoulli's equation, which states that the sum of the pressure, kinetic energy and potential energy at any two points in a fluid flow system is constant.

Assuming the flow is incompressible and there is no energy loss due to friction or heat transfer, the equation can be expressed as:

[tex]P1 + 1/2 * rho * V1^2 + rho * g * h1 = P2 + 1/2 * rho * V2^2 + rho * g * h2[/tex]

where,

P1 and P2 are the pressures at the inlet and throat of the venturi meter, respectively,

rho is the density of the fluid,

V1 and V2 are the velocities at the inlet and throat,

h1 and h2 are the elevations of the inlet and throat,

and g is the acceleration due to gravity.

Assuming that the elevations of the inlet and throat are the same,

h1 = h2, and the velocity at the inlet is negligible compared to the velocity at the throat, V1 ≈ 0, the Bernoulli's equation simplifies to:

[tex]P1 - P2 = 1/2 * rho * (V2^2 - V1^2)[/tex]

Using the continuity equation, which states that the mass flow rate is constant in a fluid flow system, the velocity at the throat can be calculated as:

[tex]A1 * V1 = A2 * V2[/tex]

where A1 and A2 are the cross-sectional areas of the pipe at the inlet and throat, respectively.

The cross-sectional areas of the pipe and throat are:

[tex]A1 = pi * (15/2)^2 = 176.71 cm^2\\A2 = pi * (5/2)^2 = 19.63 cm^2[/tex]

Using the specific gravity of the oil, we can calculate its density as:

rho = specific gravity * density of water

      = [tex]0.83 * 1000 kg/m^3[/tex]

      = [tex]830 kg/m^3[/tex]

Therefore, the range in pressure differences required to measure the flow rates of 0.002 and 0.02 [tex]m^3/s[/tex] is:

For the maximum flow rate of 0.02 [tex]m^3/s[/tex]:

[tex]V2 = (A1/A2) * V1 \\= (176.71/19.63) * 0.02 / (100/1) \\= 1.8112 m/s\\\\P1 - P2 = 1/2 * rho * (V2^2 - V1^2) \\= 1/2 * 830 * (1.8112^2 - 0) \\= 2,738 Pa[/tex]

For the minimum flow rate of 0.002 [tex]m^3/s[/tex]:

[tex]V2 = (A1/A2) * V1 \\= (176.71/19.63) * 0.002 / (100/1) \\= 0.18112 m/s\\\\P1 - P2 = 1/2 * rho * (V2^2 - V1^2) \\= 1/2 * 830 * (0.18112^2 - 0)\\ = 27.38 Pa[/tex]

Therefore, the range in pressure differences required to measure the flow rates of 0.002 and 0.02 m^3/s is approximately:

[tex]2,738 Pa - 27.38 Pa = 2,710.62 Pa.[/tex]

Learn more about Bernoulli's equation at

brainly.com/question/30504672

#SPJ1

1. Young's Double Slit Experiment with light proved that light was a wave from a reflection. FALSE

2. Sound waves speed up as they go farther down in the ocean because of multiple factors such as the ocean's waves' wavelengths being longer, pressure increasing, and salinity. TRUE.

The reflection of the light occurs when light hits a hard surface and falls back.

The Young's Double Slit Experiment with light did not prove that light was a wave from a reflection.

For question, 2;  

Sound waves speed up as they go farther down in the ocean because of multiple factors such as the ocean's waves' wavelengths being longer, pressure increasing, and salinity.

The above statement is true, as speed of a wave increases with increase in its wavelength.

Learn more about speed of wave here: https://brainly.com/question/2142871

#SPJ1

Nuclear power plants have backup generators to ensure that essential equipment, such as cooling systems, can continue to function in the event of a power outage or other emergency.

Nuclear power plants rely on a constant supply of electricity to operate the equipment that controls the nuclear reaction and cools the reactor. If the power supply is interrupted, the reactor can overheat and damage can occur. Backup generators provide power to essential equipment, such as cooling systems, that keep the reactor and spent fuel pools from overheating.  If the backup generators fail, there is a risk of a nuclear accident, as was seen in the disaster in 2011, where the failure of backup generators led to a loss of cooling and a major nuclear incident.

To know more about power plants, here

brainly.com/question/7670779

#SPJ1

If the block is displaced from its equilibrium position by a distance x, the period of its motion is T = 2π/ω = 2π√(m/k).

The period of motion of a block under simple harmonic motion is given as;

T = 2π√(m/k)

Where;

When the block is displaced from its equilibrium position by a distance x,  the force acting on it is given as;

F = -kx

where;

We also know that angular velocity is given as;

ω = √(k/m)

So the equation for the period can also be;

T = 2π/ω = 2π√(m/k)

Learn more about period of wave here: https://brainly.com/question/18818486

#SPJ1

The speed of the roller coaster car as shown is  31 m/s

We know that the roller coaster is the kind of device that we can use to be able to show the conversion of kinetic energy to potential energy. By the use of the roller coaster, we can show that the total mechanical energy in the system is a constant.

As such we have that;

mgh = 1/2mv^2

m = mass of the object

g = acceleration due to gravity

h = height

v = velocity

Hence;

gh= 1/2v^2

v = √2gh

v = √ 2 * 9.8 * 49

v = 31 m/s

Learn more about roller coaster:https://brainly.com/question/19920727

#SPJ1

Answer:

a. If the frequency of light is increased above the threshold frequency, the energy of the electrons emitted will increase.

b. If the frequency of light is decreased to below the threshold frequency, the rate at which electrons are emitted will decrease.

c. If the intensity of light is decreased, the energy of the electrons emitted will remain the same, but fewer electrons will be emitted.

d. If the intensity of light is decreased, the rate at which electrons are emitted will decrease.

The weight of the Mars Rover Curiosity on Earth and on Mars is 8820 N and 3330 N respectively.

The weight of an object is given by the product of its mass and the gravitational field strength at its location.

On Earth:

On Mars:

Therefore, the weight of the Mars Rover Curiosity on Earth and on Mars are 8820 N and 3330 N respectively.

More on weight of objects can be found here: https://brainly.com/question/12378369

#SPJ1

Answer:

A, C, and D could alter this rocket's speed or direction.

A) The rocket traveling near a planet could alter its speed or direction due to the gravitational pull of the planet.

B) The rocket rotating as it travels would not change its speed or direction, but it could change the orientation of the rocket's engines or thrust, which could affect its trajectory.

C) The rocket running out of fuel would cause it to slow down or stop moving, which would obviously alter its speed or direction.

D) The rocket changing shape could alter the way air or other particles interact with the rocket, which could affect its speed or direction. For example, if the rocket expanded in size, it would encounter more resistance in its path, which could slow it down or change its direction.

Therefore, the correct answer is A, C, and D.

Answer:

A, C, and D could alter the rocket's speed or direction.

A) The rocket traveling near a planet can alter its speed or direction due to the planet's gravity. This can cause the rocket to speed up, slow down, or change direction as it enters the planet's gravitational field.

C) If the rocket runs out of fuel, it will not be able to continue traveling at its current speed or direction. It may slow down, change direction, or come to a complete stop.

D) If the rocket changes shape, such as losing a piece of its body or encountering debris, this can alter its aerodynamics and affect its speed or direction.

B) The rocket rotating as it travels would not typically alter its speed or direction, as long as the rotation is not significant enough to affect its trajectory. The rocket's rotation could cause some minor changes in its orientation, but it would not significantly alter its speed or direction of travel.

Answer:

B. momentum = mass x velocity

Explanation:

P = mv

Answer:

Explanation: To find the magnification and location of the image produced by a concave mirror, we can use the mirror equation:

1/f = 1/do + 1/di

where f is the focal length of the mirror, do is the distance from the object to the mirror, and di is the distance from the image to the mirror.

We can use the sign conventions for mirrors, where distances are positive when measured in the direction of light propagation and negative when measured in the opposite direction.

In this case, the object is located 18.0 cm in front of the mirror, so do = -18.0 cm. The radius of curvature of the mirror is 52.0 cm, so the focal length is f = R/2 = 26.0 cm.

Substituting these values into the mirror equation, we get:

1/26.0 = 1/-18.0 + 1/di

Solving for di, we get:

1/di = 1/26.0 - 1/-18.0

1/di = 0.0385

di = 26.0 cm / 0.0385

di = 675.3 cm

The negative sign for do indicates that the object is located in front of the mirror, while the positive sign for di indicates that the image is located behind the mirror.

To find the magnification of the image, we can use the magnification equation:

m = -di / do

Substituting the given values, we get:

m = -675.3 cm / -18.0 cm

m = 37.5

Therefore, the image produced by the concave mirror is located 675.3 cm behind the mirror and is magnified by a factor of 37.5.

Among the many agents of socialization, the one that has had the most significant impact on defining a person's identity is the family. Growing up in a family shapes a person's values, beliefs, attitudes, and behavior patterns.

The family provides the foundation for a child's socialization process, and the experiences a child has in the family can determine their outlook on life.

For example, if a child is raised in a family that values education, they are more likely to value education and strive for academic success. Likewise, if a child is raised in a family that values honesty and integrity, they are more likely to uphold these values in their interactions with others. The family is also responsible for providing emotional support, which can impact a child's mental health and self-esteem. Overall, the family is the most critical agent of socialization as it shapes a person's identity from a very young age and sets the foundation for their future relationships and interactions with society.

To know more about socialization

https://brainly.com/question/31906046

#SPJ1

The electric field at the y-axis position is -10.0 N/C and is oriented towards the negative charge and electric potential at the point on the y-axis is -0.5 V..

To calculate the electric potential and electric field at the point on the y-axis, use equations for electric potential and electric field due to an electric dipole:

Electric potential V = kq/(r_+) - kq/(r_-)

Electric field E = kq/(r_+)² - kq/(r_-)²

where k = Coulomb constant,

q = charge of each point charge,

r_+ = distance from the positive charge to the point on the y-axis, and

r_- = distance from the negative charge to the same point on the y-axis.

Using the given values:

r_+ = √((0.01 m)² + (0.1 m)²) = 0.1005 m

r_- = √((0.008 m)² + (0.1 m)²) = 0.1002 m

q = 3.0 μC

Electric potential:

V = (9.0 x 10⁹ N·m²/C²)(3.0 x 10⁻⁶ C)/(0.1005 m) - (9.0 x 10⁹ N·m²/C²)(3.0 x 10⁻⁶ C)/(0.1002 m)

V = 215.6 V - 216.1 V

V = -0.5 V

The electric potential at the point on the y-axis is -0.5 V.

Electric field:

E = (9.0 x 10⁹ N·m²/C²)(3.0 x 10⁻⁶ C)/(0.1005 m)² - (9.0 x 10⁹ N·m²/C²)(3.0 x 10⁶ C)/(0.1002 m)²

E = 2705.6 N/C - 2715.6 N/C

E = -10.0 N/C

The electric field at the point on the y-axis is -10.0 N/C, directed towards the negative charge.

Find out more on electric dipole here: https://brainly.com/question/14553213

#SPJ1

(A)  The potential energy stored in the two rubber bands together will be 9.90 J. (B) the speed of the stone when it leaves the slingshot will be 10.5 m/s.

To solve this problem, we need to use the formula for potential energy stored in a spring:

U = (1/2)kx²

where U is the potential energy, k is the spring constant, and x is the displacement from the equilibrium position.

(a) To find the potential energy stored in the rubber bands, we need to first calculate the spring constant. We know that it takes a force of 15 N to stretch one rubber band by 1.0 cm, so the spring constant for one rubber band is:

k = F/x = 15 N / 0.01 m = 1500 N/m

The two rubber bands are in parallel, so the effective spring constant for both of them together is:

ktotal = 2k = 3000 N/m

To calculate the displacement of the slingshot when the stone is pulled back. The equilibrium position is where the rubber bands are unstretched, so the displacement is:

x = 0.22 m

Finally, we can calculate the potential energy stored in the rubber bands:

U = (1/2)ktotal × x² = (1/2)(3000 N/m)(0.22 m)² = 9.90 J

Therefore, the potential energy stored in the two rubber bands together is 9.90 J.

(b) To find the speed of the stone when it leaves the slingshot, we need to use the conservation of energy:

U = K

where U is the potential energy stored in the rubber bands and K is the kinetic energy of the stone when it leaves the slingshot.

The potential energy stored in the rubber bands is 9.90 J, and the kinetic energy of the stone when it leaves the slingshot is:

K = (1/2)mv²

where m is the mass of the stone and v is its velocity.

We know the mass of the stone is 47 g, which is 0.047 kg. We can solve for the velocity:

v = √(2K/m) = √(2(9.90 J)/0.047 kg) = 10.5 m/s

Therefore, the speed of the stone when it leaves the slingshot is 10.5 m/s.

To know more about potential energy

https://brainly.com/question/31657479

#SPJ1

Answer:

4161 J/kg·°C

Explanation:

We can use the principle of conservation of energy to solve this problem, which states that the total heat energy in a closed system is constant. The heat lost by the tea is equal to the heat gained by the milk.

Let's first calculate the heat lost by the tea:

Q(tea) = mcΔT

Q(tea) = (0.27 kg)(3910 J/kg·°C)(90.0°C - 85.0°C)

Q(tea) = 6555 J

where m is the mass of tea, c is the specific heat of tea, and ΔT is the change in temperature.

Next, let's calculate the heat gained by the milk:

Q(milk) = mcΔT

Q(milk) = (0.02 kg)(c)(85.0°C - 6.0°C)

Now we can equate the two expressions:

Q(tea) = Q(milk)

6555 J = (0.02 kg)(c)(79.0°C)

Solving for c, we get:

c = 4161 J/kg·°C

Therefore, the specific heat of milk is approximately 4161 J/kg·°C.

An example of relapse is D, Troy was trying to get stronger, so he participated in a strength training program all year but then got too busy and did not lift a single weight all summer.

After a time of improvement or change, relapse is the return to a prior state or behavior. Relapse is used to describe the restart of drug or alcohol use or other addictive behaviors after a period of abstinence or recovery in the context of addiction or recovery.

This is an example of a relapse "slip" because Troy was making progress towards his goal of getting stronger but temporarily stopped due to being busy, whereas a "fall" would imply a complete abandonment of the goal with no intention of getting back on track.

Find out more on relapse here: https://brainly.com/question/7249782

#SPJ1

Answer: The correct answer is A "Hailey was trying to eat healthier, but she ate a bowl of ice cream after dinner."

Explanation: I got it right on the test

GL to all of you out there <3

The formula for potential difference (also known as voltage) is, V = ΔE/q, where V is the potential difference in volts (V), ΔE is the change in electric potential energy in joules (J), and q is the charge in coulombs (C).

Electric potential difference, also known as voltage, is a measure of the electric potential energy per unit of charge required to move a charge from one point to another in an electric circuit. It is the difference in electric potential between two points in an electric circuit.

The formula for potential difference, V = ΔE/q, reflects this relationship. The numerator, ΔE, represents the change in electric potential energy between the two points, while the denominator, q, represents the charge that moves between the two points.

For example, if a charge of +1 C moves from a point A to a point B in an electric circuit, and the electric potential energy at point B is greater than at point A by 1 J, then the potential difference between points A and B is 1 V. This means that it takes 1 J of energy to move a unit of charge from point A to point B in the circuit.

To know more about potential difference, here

brainly.com/question/12198573

#SPJ1

Answer:

C) The book's inertia carried it forward.

When the bus stops suddenly, the book tends to remain in motion due to its inertia. The book was at rest on the seat of the bus, and when the bus stopped suddenly, the book continued moving forward with the same speed and direction it had before the bus stopped. As a result, the book slid off the seat and onto the floor.

Firing a gun straight up into the air can be dangerous because the bullet, when it falls back to Earth, can reach a high enough velocity to cause injury or even death.

When a bullet is fired straight up into the air, it will eventually reach the highest point of its trajectory and begin to fall back down due to gravity. As it falls, it gains speed and momentum, which can cause it to reach a lethal velocity when it impacts a person or object on the ground. This phenomenon is known as "celebratory gunfire," and it can cause serious harm to people who are hit by falling bullets. Therefore, firing a gun straight up into the air is never a safe or responsible act.

To know more about momentum, here

brainly.com/question/30487676

#SPJ1

--The complete question is, What is the scientific explanation for why firing a gun straight up into the air can be dangerous, despite the fact that the bullet will eventually fall back down to Earth?--

If a particle's velocity is nonzero, then its acceleration can be zero, because acceleration is the rate of change of velocity. If the velocity is constant and does not change, the acceleration is zero.

The rate of change of an object's velocity with respect to time is defined as acceleration. Vector quantities are accelerations. The orientation of an object's acceleration is determined by the orientation of its net force.

Because velocity is both a speed and a direction, there are only two ways to accelerate: modify your speed or your direction—or both.

Learn more about acceleration here:
https://brainly.com/question/460763

#SPJ1

Answer:

Explanation: To calculate the displacement of an object moving with constant acceleration, we can use the following kinematic equation:

d = (1/2)at^2 + v0t

where d is the displacement of the object, a is the constant acceleration, t is the time elapsed, and v0 is the initial velocity of the object.

In this case, we know the initial velocity v0 = 3 m/s and the final velocity vf = 10 m/s. We also know that the object moves with constant acceleration, so we can use the following equation to relate the initial and final velocities to the acceleration and displacement:

vf^2 = v0^2 + 2ad

Solving for d, we get:

d = (vf^2 - v0^2) / (2a)

Substituting the given values, we get:

d = (10^2 - 3^2) / (2a) = 91 / (2a)

Therefore, to calculate the displacement of the object, we need to determine the value of the acceleration.

We can use the velocity vs. time graph to find the acceleration of the object. The slope of the velocity vs. time graph represents the acceleration of the object, since acceleration is the rate of change of velocity with respect to time.

Since the initial position of the object is zero, the velocity vs. time graph will pass through the origin. Therefore, we can use the part of the graph between the initial time t=0 and the final time when the velocity is 10 m/s. This part of the graph will be a straight line with positive slope, representing the constant acceleration of the object.

We can calculate the slope of this line by finding the change in velocity and dividing by the time elapsed:

a = (vf - v0) / t

Substituting the given values, we get:

a = (10 - 3) / t

Therefore, the acceleration of the object is 7/t, where t is the time elapsed between the initial and final velocities.

Substituting this value for a into the expression for displacement, we get:

d = 91 / (2(7/t)) = (91t) / 14

Therefore, the part of the velocity vs. time graph between t=0 and the final time can be used to calculate the displacement of the object using the equation d = (91t) / 14.

part a.

The student’s speed just after losing contact with the spring  is 14.14 m/s

part b.

The students can go up to 32.06cm

Speed is described as one such measurable quantity that measures the ratio of the distance travelled by an object to the time required to travel that distance.

Given values:

We apply the conservation of energy, energy in the compressed string:

1/2 mv2 = 1/2 kx²v²

which will be [tex]\sqrt{kxv}/m[/tex]

substituting we have the value as 14.14 m/s

part b.

then conservation of energy equation will become:

1/2 kx² + mgh

substituting we have the value as 32.06cm

Learn more about speed at:

https://brainly.com/question/4931057

#SPJ1

.