The temperatures (in degrees Fahrenheit) in Long Island recorded by the weather bureau over a week were 42, 49, 53, 55, 50, 47, and 52. Which measure should the weather bureau use to calculate how far apart the upper and lower quartiles of the week's daily temperatures were?
A
mode
B.
mean absolute deviation
C.
interquartile range
D.
mean

As the function f is defined piecewise with different rules on different intervals, we need to check the continuity of f at each point of its domain.

In order for a function to be continuous, it needs to be defined and have no breaks, jumps, or holes in its graph. Let's consider the function f with a positive constant k.

The function f can be written as:

f(x) = {

kx^2, if x < 2,

4k - 3x, if x >= 2

}

To determine the value of k for which f is continuous, we need to ensure that the two cases defined for f match at the point x = 2.

When x < 2, the function is defined as kx^2. At x = 2, this becomes k(2)^2 = 4k.

When x >= 2, the function is defined as 4k - 3x. At x = 2, this becomes 4k - 3(2) = 4k - 6.

For the function f to be continuous, the values of 4k and 4k - 6 must be equal at x = 2. Therefore, we have the equation 4k = 4k - 6.

Simplifying the equation, we find that -6 = 0, which is not true for any value of k.

Since the equation has no solution, it means that there is no specific value of k for which f is continuous. However, we can note that for all positive values of k, the function will still be defined in both cases and continuous within each individual case. Therefore, the function f will be continuous for all positive values of k.

Learn more about Intervals here: brainly.com/question/11051767

#SPJ11

Tom does have enough fertilizer to cover the triangular area, as the triangular area is of 179.6 m², and he has 300 m² of fertilizer.

We are given the three sides of the triangle, hence the first step in obtaining the area is obtaining the semi-perimeter, which is half the perimeter, hence:

s = (26 + 20 + 18)/2

s = 32 m.

The area of the triangle is then obtained as follows:

[tex]A = \sqrt{s(s - a)(s - b)(s - c)}[/tex]

[tex]A = \sqrt{32(32 - 26)(32 - 20)(32 - 18)}[/tex]

A = 179.6 m².

Hence Tom does have enough fertilizer to cover the triangular area, as the triangular area is of 179.6 m², and he has 300 m² of fertilizer.

More can be learned about the area of a triangle at brainly.com/question/21735282

#SPJ1

Answer: mean= 24.2 and the standard deviation is 6.0 :)

Step-by-step explanation: this is because when you solve for the equation the result for the standard deviation is 6.3 but if you round the number, it becomes 6.0, being the standard deviation.

To calculate the height of the tree that would leave a 35 cm space from a 250 cm tall ceiling, subtract the desired space from the total height. Hence, the tree should be 215 centimeters tall.

The calculation involves understanding and using the concepts of height and ceiling space. When you want a tree to leave a certain amount of space from the ceiling, you have to subtract that desired space from the total height of the room. So, if your ceiling is 250 centimeters high and you desire a space of 35 centimeters to be left, the tree's height should be calculated as follows:

So, in this scenario, the tree must be 215 centimeters tall to fit perfectly under your ceiling with 35 centimeters of space left.

https://brainly.com/question/34088742

#SPJ11

The system of the equations that describes the situation can be represented as: j + g = 23, j - 2g = - 4

A system of equation is a linear algebraic expression that are represented in variables with their coefficients. A system of equation usually comprises of two equation and these equation are attached to their individual constant.

This implies that, we can have a system of equations where x and y are the variables and the constant can be any number. From the given information, let's assume that the variable for Jodi is "j" and Jerry is "g", then:

j + g = 23

If Jodi buys 4 less than twice number of Jerry's games, then we can have:

j = 2g - 4

j - 2g = - 4

Therefore, the system of the equations can be represented as:

j + g = 23        ------- (1)

j - 2g = - 4     --------- (2)

Learn more about systems of equations here:

https://brainly.com/question/13729904

#SPJ1

We should add 25 to make it a perfect square.

Given is an expression 4x²+20x, we need to add a term to make it a perfect square,

So,

4x²+20x

= (2x)² + 2 × 2 × 5 × x

Add and subtract 25.

= (2x)² + 2 × 2 × 5 × x + 25 - 25

= (2x)² + 2 × 2 × 5 × x + 5² - 25

= (2x+5)² - 25

Hence we should add 25 to make it a perfect square.

Learn more about perfect square click;

https://brainly.com/question/13521012

#SPJ1

Mrs. Coleman can make 20 dresses from the remaining fabric.

To determine how many dresses Mrs. Coleman can make from the remaining fabric, we need to calculate the available fabric after she used 3 meters for her skirt and convert it to centimeters.

Given:

Total fabric received = 25 meters

Fabric used for Mrs. Coleman's skirt = 3 meters

Remaining fabric = Total fabric received - Fabric used for the skirt

Remaining fabric = 25 meters - 3 meters

Remaining fabric = 22 meters

Now, we need to convert the remaining fabric from meters to centimeters:

1 meter = 100 centimeters

Remaining fabric in centimeters = Remaining fabric in meters * 100 centimeters/meter

Remaining fabric in centimeters = 22 meters * 100 centimeters/meter

Remaining fabric in centimeters = 2200 centimeters

To calculate the number of dresses Mrs. Coleman can make, we divide the remaining fabric in centimeters by the fabric needed per dress:

Number of dresses = Remaining fabric in centimeters / Fabric needed per dress

Number of dresses = 2200 centimeters / 110 centimeters per dress

Number of dresses = 20 dresses

Know more about meter here:

https://brainly.com/question/372485

#SPJ11

Answer:

2 there we have the second quadrant

The sketch of the graph of the logarithm function is added s an attachment

From the question, we have the following parameters that can be used in our computation:

y = 3log₂(-x) - 9

The above equations is an illustration of a logarithm function that has been transformed using the following

Next, we plot the graph using a graphing tool

The graph of the logarithm function is added as an attachment

Read more about logarithm equations at

https://brainly.com/question/28041634

#SPJ1

The angles in the trapezoid are as follows:

m∠D = 21°

m∠A = 159°

m∠B =  159°

Isosceles trapezoid is a trapezoid in which the top and bottom sides are parallel, while the remaining two non-parallel sides have the same length.

Adjacent angles of the isosceles trapezoid are congruent.

Hence,

m∠D = 21 degrees

Any lower base angles is supplementary to any upper base angles.

m∠A = 180 - 21 = 159 degrees

m∠B = 180 - 21 = 159 degrees

learn more on isosceles trapezoid here: https://brainly.com/question/2516570

#SPJ1

Answer:

sec θ

Step-by-step explanation:

cos θ + sin θ tan θ

= cos θ + sin θ (sin θ / cos θ)

= cos θ + (sin²θ)/cos θ

= cos θ + (1 - cos²θ) / cosθ

= cos θ + 1/cos θ - cos²θ/cos θ

= cos θ + 1/cos θ - cos θ

= 1/cos θ

= sec θ

The length of the room (h) is 18 feet. The width of the room is (h - 4), so the width is 18 - 4 = 14 feet.The dimensions of the room are 18 feet by 14 feet.

Let's denote the length of the room as h. According to the problem, the width is four feet less than the length, so the width can be represented as (h - 4).

The area of a rectangle is given by the formula: area = length * width. In this case, the area is given as 252 square feet. Therefore, we can write the equation:

252 = h * (h - 4)

To solve this equation, we need to put it in standard quadratic form, which is ax² + bx + c = 0. Expanding the equation and rearranging terms, we have:

h² - 4h - 252 = 0

Now we can solve this quadratic equation. It can be factored or solved using the quadratic formula. Factoring it, we find:

(h - 18)(h + 14) = 0

Setting each factor equal to zero, we have two possible solutions:

h - 18 = 0 or h + 14 = 0

Solving for h, we find:

h = 18 or h = -14

Since the dimensions of a room cannot be negative, we discard the solution h = -14.

For such more questions on Dimensions:

https://brainly.com/question/28464

#SPJ11

The limit lim(x→∞) x/√(x^2 + 3) is 1, and there is no need to apply L'Hospital's Rule in this case.

When trying to use L'Hospital's Rule to find the limit lim(x→∞) x/√(x^2 + 3), it is important to note that L'Hospital's Rule can only be applied if the function is continuous and differentiable. In this case, the function is continuous and differentiable, but applying L'Hospital's Rule is not necessary as the limit can be evaluated using another method.
First, let's rewrite the given function by dividing both the numerator and the denominator by x:
lim(x→∞) (x/x) / (√(x^2 + 3)/x) = lim(x→∞) 1 / √(1 + 3/x^2)
As x approaches infinity, the term 3/x^2 approaches 0, so the limit becomes:
lim(x→∞) 1 / √(1 + 0) = 1 / √(1) = 1
Therefore, the limit lim(x→∞) x/√(x^2 + 3) is 1, and there is no need to apply L'Hospital's Rule in this case.

To know more about Limit visit:

https://brainly.com/question/12207539

#SPJ11

Option B is correct, 2/3 is the scale factor of the dilation.

Triangle A'B'C' is the dilated form of the triangle ABC

By the translation of dilation an object becomes larger or smaller

Scale factor is the size by which the shape is enlarged or reduced.

Let us consider the side AB which has 12 units

When it is multiplied with 2/3 we get 8 which is length of A'B'

Similarly let us check for other sides of the triangle, which gives 2/3 as a scale factor

Hence, 2/3 is the scale factor of the dilation.

To learn more on Graph click:

https://brainly.com/question/17267403

#SPJ1

Answer:

Step-by-step explanation:

True.

A Data Flow Diagram (DFD) is a graphical representation of a system or a process that shows how data flows through different components of the system. It provides a visual representation of the system's inputs, processes, and outputs.

While a DFD can provide information on the data that flows between the different components of a system, it does not provide any information about the timing or sequence of those processes. A DFD is a static diagram that only depicts the flow of data in a system and does not provide any indication of when or how frequently processes occur

The linear regression equation that best fits the data set is y = 126x + 462.

To find the linear regression equation, we can use the following steps:

Calculate the slope and the y-intercept..

In this case, we have the following values:

y₂ = 4,920

y₁ = 650

x₂= 20

x₁ = 2

Substituting these values into the formula, we get the following:

m = (4,920 - 650)/(20 - 2) = 2,270/18 = 126.11

The y-intercept is calculated using the following formula:

b = y - mx

In this case, we can use the point (2, 650) because it is the first point in the table. Substituting these values into the formula, we get the following:

b = 650 - 126.11(2) = 461.89

The linear regression equation that best fits the data set is y = 126.11x + 461.89. Round each parameter to the nearest whole number, we get y = 126x + 462.

Learn more about regression on

https://brainly.com/question/25987747

#SPJ1

The number of views of a video on the internet is shown in the table below as a function of the time since the video was posted (in hours).

Number of hours, x

Number of views, y

2

650

5

1,280

8 12

2,140

3,120

17

4,050

20

4,920

Find a linear regression equation, in the form y=ax+b, that best fits this data set. Round each parameter to the nearest whole number.

The ant population will reach 38.2 thousand in about 3.25 years, assuming a growth rate of 5% per year.

To answer this question, we need to know the growth rate of the ant population. Let's say the growth rate is 5% per year. This means that each year, the population will increase by 5% of its current size. To calculate the population size after a certain number of years, we can use the formula:

P = P0 * (1 + r)^t

where P is the population size after t years, P0 is the initial population size, r is the growth rate as a decimal, and t is the number of years.

Assuming the initial population size is 30 thousand, we can plug in the values to find when the population will reach 38.2 thousand:

38.2 = 30 * (1 + 0.05)^t

Solving for t, we get t = 3.25 years. However, it's important to note that the actual growth rate may be different, so this calculation is just an estimate.

To learn more about : population

https://brainly.com/question/30396931

#SPJ11

the equation of the ellipse in standard form with the given properties is:

x²/16 + y²/16 = 1

What is ellipse?
An ellipse is a closed curve that is symmetric about its center. It is a type of conic section, which is formed by intersecting a cone with a plane. An ellipse is defined as the set of all points in a plane for which the sum of the distances to two fixed points (called the foci) is constant.

To write the equation of an ellipse in standard form with the center at the origin, foci at (-1, 0), and co-vertices at (0, -4), we can use the following information:

Center: (h, k) = (0, 0) (since the center is at the origin)

Foci: (c, 0) = (-1, 0)

Co-vertices: (0, b) = (0, -4)

Let's denote "a" as the distance from the center to the vertices and "c" as the distance from the center to the foci.

From the given information, we can deduce that:

a = 4 (since the distance from the center to the co-vertices is 4)

c = 1 (since the distance from the center to the foci is 1)

The standard form equation for an ellipse with a horizontal major axis and center at the origin is:

x²/a² + y²/b² = 1

Substituting the values we found:

x²/4² + y²/(-4)² = 1

Simplifying the equation:

x²/16 + y²/16 = 1

Thus, the equation of the ellipse in standard form with the given properties is:

x²/16 + y²/16 = 1

Read more about ellipse at:
https://brainly.com/question/16904744
#SPJ4

Answer:

130

Step-by-step explanation:

The expected count of women who ranked the dark-skinned model as the most beautiful is 100.

Since there are three models, we would expect 100/3 = 33.33% of the women to have ranked each model as the most beautiful if there were no relationship between skin color and beauty judgements. Thus, we can calculate the expected count of women who ranked the dark-skinned model as the most beautiful as follows:

Expected count = 300 * 33.33% = 100

Therefore, we can expect that 100 women out of the 300 sampled would have ranked the dark-skinned model as the most beautiful if there were no relationship between skin color and beauty judgements. The observed count of 55 women who ranked the dark-skinned model as the most beautiful is higher than the expected count, which suggests that there may be a relationship between skin color and beauty judgements. However, further statistical tests would be needed to confirm this.

Learn more about Statistical Tests here: brainly.com/question/31746962

#SPJ11

The probability of drawing a green candy and a blue candy from the bag, one at a time and without replacement, is approximately 0.077 or 7.7%.

To calculate the probability of drawing a green candy and a blue candy from the bag without replacement, we need to determine the total number of candy combinations and the favorable combinations (green and blue candies).

The total number of candies in the bag is 3 blue + 4 green + 6 red = 13 candies.

When drawing the first candy, there are 13 candies to choose from. If a green candy is drawn, there are 4 green candies remaining out of the 12 candies left in the bag. Now, if a blue candy is drawn as the second candy, there are 3 blue candies remaining out of the 11 candies left in the bag.

The probability of drawing a green candy and a blue candy can be calculated as follows:

Probability = (Number of favorable combinations) / (Total number of candy combinations)

Number of favorable combinations = 4 (number of green candies) * 3 (number of blue candies) = 12

Total number of candy combinations = 13 (total candies) * 12 (remaining candies) = 156

Probability = 12 / 156 ≈ 0.077 or 7.7% (rounded to the nearest tenth)

Know more about probability here:

https://brainly.com/question/32004014

#SPJ11

The percentage of pregnancies last shorter than 38 weeks is (c) 30.85%.

We can use the normal distribution formula to calculate the percentage of pregnancies that last shorter than 38 weeks:

z = (x - μ) / σ

where z is the z-score, x is the value we are interested in (in this case, x = 38), μ is the mean (μ = 39), and σ is the standard deviation (σ = 2).

Substituting the values, we get:

z = (38 - 39) / 2 = -0.5

We can now use a standard normal distribution table or a calculator to find the percentage of values that fall below the z-score of -0.5. The area to the left of -0.5 is approximately 30.85%.

To know more about percentage,

https://brainly.com/question/29746632

#SPJ11

Answer:

The answer is 460m²

Step-by-step explanation:

Area of rectangle =Length × Width

A=20×23

A=460m²

Answer:460

Step-by-step explanation: 20

                                          x 23

                                          _____

                                               60

                                             +400

There are different ways to approach this question, but one possible method is to conduct a one-sample t-test using the formula t = (M - μ) / (s / sqrt(n)), where M is the sample mean, μ is the population mean (null hypothesis), s is the sample standard deviation, and n is the sample size. With the given information, the t-value is (1.6 - 0) / (0.8 / sqrt(16)) = 8.

The degrees of freedom is n - 1 = 15. Using a t-table or a calculator, the p-value for a one-tailed test with 15 degrees of freedom and a t-value of 8 is much smaller than .05 (e.g., < .0005). Therefore, we can reject the null hypothesis and conclude that women find a sense of humor to be important in a long-term relationship at a .05 level of significance. The correct answer is b.

Test 2 is associated with smaller critical values. The critical values for a t-test depend on the level of significance, the degrees of freedom, and whether the test is one-tailed or two-tailed. In general, a smaller level of significance or a larger sample size leads to smaller critical values (i.e., it becomes easier to reject the null hypothesis). Since Test 2 has a larger sample size than Test 1, it is more likely to detect a significant effect (i.e., have a smaller Type II error rate), and therefore requires smaller critical values to achieve a .05 level of significance. The correct answer is b.

To learn more about hypothesis : brainly.com/question/30899146

#SPJ11

The volume of the tool box is 2,052 cubic inches.

To find the volume of a rectangular solid, we need to multiply its length, width, and height. In this case, the length is 19 inches, the width is 12 inches, and the height is 9 inches. So, we can use the formula:

Volume = length x width x height

Volume = 19 in. x 12 in. x 9 in.

Volume = 2,052 cubic inches

Therefore, the volume of the tool box is 2,052 cubic inches.

Conclusion: The tool box has a volume of 2,052 cubic inches, which means it can hold that much space or stuff inside it.
The volume of the toolbox is 2052 cubic inches.


To calculate the volume of a rectangular solid, you multiply the length, width, and height of the solid. In this case, the dimensions of the toolbox are 19 inches (length), 12 inches (width), and 9 inches (height).

Step 1: Multiply the length, width, and height:
Volume = Length × Width × Height

Step 2: Substitute the given dimensions:
Volume = 19 inches × 12 inches × 9 inches

Step 3: Perform the multiplication:
Volume = 2052 cubic inches

The volume of the rectangular solid toolbox with sides of 19 inches, 12 inches, and 9 inches is 2052 cubic inches.

To know more about rectangular visit:

https://brainly.com/question/29006211

#SPJ11

Hello

9¹⁴ x 9² ÷ 9⁵

= 9¹⁴⁺² ÷ 9⁵

= 9¹⁶ ÷ 9⁵

= 9¹⁶⁻⁵

= 9¹¹

The unknown exponent "x" is equal to 11. So the simplified expression is 9¹¹ - 9¹¹.

Let's begin by applying the rules of exponents to simplify the given expression:

Step 1: Combine the exponents when multiplying the same base.

[9¹⁴ x 9²] can be simplified to 9¹⁴⁺² = 9¹⁶.

Step 2: Calculate 9⁵.

9⁵ = 9 x 9 x 9 x 9 x 9 = 59,049.

Step 3: Now we have the expression: 9¹⁶ / 59,049 - 9ˣ.

We need to find the value of the unknown exponent that completes the expression. Let's denote the unknown exponent as "x."

Step 4: Subtract the exponents when dividing the same base.

9¹⁶ / 59,049 can be written as 9¹⁶⁻⁵ = 9¹¹

Step 5: So, the simplified expression is 9¹¹ - 9ˣ.

Now, we want to find the value of "x."

Step 6: To do this, we can set the exponents equal to each other since they have the same base.

We have: 11 = x.

To know more about exponent here

https://brainly.com/question/5497425

#SPJ2

The incorrect statement is

1: The transformation can be represented by (x, -y).

In geometry reflection is a transformation that produces the mirror image of a figure across a line or a plane.

The line or plane across which the figure is reflected is called the line of reflection. The image produced by reflection is a congruent image of the original figure

the reflection depicted is over the y axis and the reflection rule in this case is

(x, y) →  (-x, y)

Other options are true as the pre image is in the fourth quadrant and is congruent with the image.

Learn more about transformation at

https://brainly.com/question/4289712

#SPJ1

The equation that represents the grade for the assignments is:

Y = 6(X) + 50

The general formula for the equation of a line in slope intercept form is expressed as:

y = mx + c

where:

m is slope

c is y-intercept

We are told that they give 6 points each for each assignment done and a base grade of 50. Thus, using the format of linear equation in slope intercept form, we have the equation as:

Y = 6(X) + 50

Here 6 is the slope.

Read more about Linear Equation Word Problems at: https://brainly.com/question/20335698

#SPJ1