Answer:
The connecting rod and its cap
Explanation:
The connecting rod connects to the underside of the piston and also connects it to the crankshaft. However, if you do not have the bearings to the part that connects to the crankshaft, things can overheat and go very wrong.
Know and Understand
1. Why are layout lines used?
A. To mark the center points of circles for drilling operations
B. To mark lines and arcs for cutting operations
C. Both of the above.
D. None of the above.
Answer: To mark the center points of circles for drilling operations
Explanation:
Why are nails referred to be term “ penny”?(ex:21 penny nails ) pocket ref
Answer:
The term "penny" used with nails was a measurement, originally in England, meaning price per 100.
Which of the following lists has the correct key phases of a Safety and Health Program strategic map?
A. Getting Ready, Taking Action, Making Progress, Staying on Track
B. Setting Goals, Changing Priorities, Making Progress, Finishing the Race
C. Getting Ready, Assigning Jobs, Aligning Resources, Finding Root Causes
D. Setting Goals, Choosing Committees, Assigning Jobs, Winning the Game
Answer:
Explanation:
c.
Answer: c
Explanation:
Elucidate the importance of an animal doctor.
Answer:
An animal doctors are professionally trained people to take care of the animals
Explanation:
they are professionally trained people to take care of the animals because they know understand well the behavior, signals, languages and communications from the animals to know what the want or what is wrong with them
A piece of shaft 1 1/4 inch in diameter is 3/16 inch too large for a whole. What is the size of the hole? (For welding class)
If the piece of shaft 1 1/4 inch in diameter is 3/16 inch too large for a hole. the size of the hole is going to be calculated as: 1.0643 inches
How to find the size of the holeThe piece of shaft is given as 1 1/4 inch in diameter
The difference that lies between the shaft and the hole is said to be 3/16 inch. This is due to the fact that the question says that it is 3/16 inches too large for the hole.
Therefore the size of the hole would be gotten by:
1 1/4 inch - 3/16 inch
= 1.25 - 0.1857
= 1.0643
Therefore the size of the hole that we have here is 1.0643 inches.
Read more on diameter here:
https://brainly.com/question/23220731
#SPJ1
Space ships and space suits are___ tight beacisr
Answer:
Space ships and space suits are tight because space is a vacuum.
Explanation:
Real space suits are made from a Kevlar-like fabric, which is then pumped full of air to maintain enough pressure for a human to survive and work. If you pump air into any flexible material, it inflates like a balloon. Space suits are no different.
Astronauts have complained that space suits are tiring to move around in, because they also become rigid like a balloon. Modern space suits have complex mechanical joints to make movement easier. But there’s only so much you can do with what is effectively still a stiff human-shaped balloon.
So a team at MIT under engineer Dana Newman has constructed a prototype skin-tight space suit that uses physical pressure instead of air to hold your body in. Think of it like a very stiff and tight leotard with an air bubble just around your head. But at this point it’s more of a promising concept than reality.
Thanks,
Eddie
If you build a 1:10 model of a car that is 15 feet long, how long would the model be?
Give your answer in feet and inches.
multiple choice
What is the idea behind form following function?
A good design is based on the imitation of organic life.
A good design is based on how the object or structure will be used.
A good design is based on what looks the most visually appealing.
A good design is based on how quickly the object or structure can be created.
The idea behind form following function is: B. A good design is based on how the object or structure will be used.
What is form?Form can be defined as an element of art and it has three-dimensions, height width and depth, and are usually enclosed in space.
This ultimately implies that, height (length), width (breadth) and depth are the three dimensional parameters that makes up a form. Also, form as a principle of design, an element of art, and media can either be geometric or free-form.
Generally speaking, the function of a physical object refers to what it can be used to do such as proffering a solution to a specific problem.
Read more on form and function here: https://brainly.com/question/23417171
#SPJ1
A current of 0.20 A passes through a 3.0 resistor. The resistor is connected in series with a 6.0 V
battery and an unknown resistor. What is the resistance value of the unknown resistor?
By applying Ohm's law, the resistance value of the unknown resistor is equal to 27.0 Ohms.
What is Ohm's law?Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.
Mathematically, Ohm's law is given by this formula;
V = IR
Where;
V represents voltage measured in voltage.I represents current measured in amperes.R represents resistance measured in ohms.How to calculate the unknown resistor?By applying Ohm's law, we would determine the resistance of the battery as follows:
V = IR
R = V/I
R = 6/0.2
Resistance, R = 30.0 Ohms.
Now, we can calculate the resistance value of the unknown resistor:
Unknown resistance = 30.0 - 3.0
Unknown resistance = 27.0 Ohms.
Read more on resistance in series here: https://brainly.com/question/1851488
#SPJ1
la derivada de g(x)=4-x2
Is it OK to pass cars that have pulled over to let emergency vehicles through
The department of motor vehicles can suspend the license of any person that has accumulated
That statement is false in most states.
Any citizen within the jurisdiction, whether male or female, adult or minor, may accumulate at any time, or refrain from accumulating, as much or as little as he or she wishes.
Such a decision on the part of the citizen is of no interest or concern to the Department of Motor Vehicles.
Note: This Brainly answer is not intended as legal advice. You are responsible for confirming the legality of your decisions and actions with local counselors within the jurisdiction of your own country, state, province, county, city, village, hamlet, or settlement. Moreover, minors are advised to confirm them with their parents or guardians.
That statement is false in most states. Any citizen within the jurisdiction, whether male or female, adult or minor, may accumulate at any time, or refrain from accumulating, as much or as little as he or she wishes.
What is Motor vehicles?Such a decision on the part of the citizen is of no interest or concern to the Department of Motor Vehicles.
A motor vehicle, often referred to as a motorized vehicle or an automotive vehicle, is a self-propelled land vehicle, typically with wheels, that is used for the movement of people or goods and does not run on rails (unlike trains or trams).
An engine or motor, typically an internal combustion engine or an electric motor, or any mix of the two, such as hybrid electric vehicles and plug-in hybrids, provides the vehicle's propulsion.
Therefore, That statement is false in most states. Any citizen within the jurisdiction, whether male or female, adult or minor, may accumulate at any time, or refrain from accumulating, as much or as little as he or she wishes.
To learn more about Vehicle, refer to the link:
https://brainly.com/question/24745369
#SPJ2
2. An arc welding machine which consists of a dc rectifier and an
alternator is a(n)
machine.
A. positive-voltage
B. direct current
C. ac/dc
D. alternating current
E. None of the above.
An arc welding machine which consists of a dc rectifier and an alternator is an ac/dc machine. The correct option is C.
What is an arc welding machine?An arc welding machine is a metal-fusing device. An electrode in the machine generates an electrical arc, which melts metal or supplies filler into a joint between two pieces of metal.
Arc welding machines use a lot of energy to reach temperatures of up to 3,600 degree Celsius, which is needed to fuse metals.
An ac/dc machine is an arc welding machine that consists of a dc rectifier and an alternator.
Thus, the correct option is C.
For more details regarding arc welding machine, visit:
https://brainly.com/question/14994590
#SPJ1
What is the most common construction design used to build small and medium size passenger cars?
Answer: Also called a 'space frame construction or unitized construction', this is the most common type of configuration used to build small and medium passenger cars.
Explanation:
Why doesn’t the US just use the metric system
Explanation:
The biggest reasons the U.S. hasn't adopted the metric system are simply time and money. When the Industrial Revolution began in the country, expensive manufacturing plants became a main source of American jobs and consumer products.
