The velocity of sound waves is roughly the same for all wavelengths. Suppose that a sound wave has a wavelength of one meter and a frequency of 1000hz. The wavelength of a 250hz sound wave would then be.

Double insulated is a term used to describe an electrical product designed so that a single ground fault cannot cause a dangerous electrical shock through any exposed parts of the products that can be touched by an electrician.

The number one reason to test insulation is to ensure public and personal safety. By performing high voltage testing between the dead life and grounded conductors the possibility of life-threatening short circuits or ground faults can be eliminated.

Care should always be taken not to measure the insulation resistance when the temperature is below the dew point. This is the easiest method. Apply the test voltage briefly and record the measured insulation resistance at this point. Network connections are generally of two types: peer-to-peer and network-sharing environments.

Learn more about Double insulated here:-https://brainly.com/question/14719149

#SPJ4

The moon orbiting the earth and Gravity pulls skydiver down towards the surface of the earth from an airplane are examples of a non-contact force

Non-contact forces are forces that act between two objects that are not physically touching each other.

That means that there is no contact but there exist force between them .The moon orbiting the earth due to gravitational force between both the bodies , this is a non contact force . Because moon is in not in contact with the earth , still both the bodies are exerting force on each other

Also Gravity pulls skydiver down towards the surface of the earth from an airplane is also an example of non contact force because there is no contact between skydiver and earth , still due to earth's gravitational force , it is been attracted towards the ground

To learn more about Non-contact forces here :

https://brainly.com/question/18451249

#SPJ1

Because of how large Earth is, an ant's exploration of it makes it appear flat. It appears that the Big Bang theory explains how components were created in the first few minutes following the Big Bang.

Contrary to popular belief, Earth doesn't provide an official international name. The word "Terra" is merely a common misunderstanding of the scientific name for the planet. "Earth" is the commonly used English name for the planet, particularly in scientific contexts.

A planet like the Earth revolves around a star called the sun. A star is typically understood to be a mass of gas that is sufficiently massive and dense to enable nuclear fusion to occur at its core.

To know more about earth visit:

https://brainly.com/question/12041467

#SPJ4

The dot on the screen in the center of the fringe e to the left slit than it is from the dot to the right slit is 940 nm.

The wavelength of mild is defined as. It is far denoted with the aid of the Greek letter lambda (λ). consequently, the space between both one crest or trough of one wave and the next wave is known as wavelength.

A bright fringe creates constructive interference, the wavelength is always in multiple forms.

At the center fringe, the difference is (470 nm)(0) = 0

For the first maximum, the difference is (470 nm)(1) = 470 nm

For the second maximum, the difference = (470 nm)(2) = 940 nm

Thus, for nth maxima, the difference is (470 nm)(n)

From the image uploaded, C is located on the second maximum, therefore the difference is given as  (470 nm)(2) = 940 nm

Therefore, the dot on the screen in the center of the fringe is 940 nm.

Learn more about wavelength here:-https://brainly.com/question/10728818

#SPJ4

The angular speed of the tires with 52.2 cm diameter about their axles if the automobile is traveling at 60.5 km/h is 64.65 rad / s

v = r ω

v = Linear / Tangential velocity

r = Radius

ω = Angular velocity

v = 60.5 km / h = 16.81 m / s

r = 52.2 / 2 cm = 26.1 cm

r = 0.26 m

ω = v / r

ω = 16.81 / 0.26

ω = 64.65 rad / s

Therefore, the angular speed of the tires about their axles is 64.65 rad / s

To know more about angular speed

https://brainly.com/question/28439806

#SPJ4

When starting and ending at rest and stretching this cuff from x = 0 to x = l, the work involved is:. al²÷2

A force's output is defined as the product of the force's component acting in the displacement's direction and its magnitude. Formula. The following formula can be used to determine work: multiply force by distance traveled in the direction of force. W = F × d.

In our daily lives, we see many examples of work is being done. Several examples include a student carrying a bag full of books off his shoulder or back, a horse dragging a plow through a field, a father moving a supermarket cart at a mall, and many more.

Stretching the rubber band from x = 0 to x = L requires work.

[tex]W = \int\limits^L_0 {F} \, dx = \int\limits^L_0 {a} \, dx \\W = \frac{aL}{2}[/tex]

To know more about work done visit:

https://brainly.com/question/13662169

#SPJ4

The ability of Torricelli's hypothesis about atmospheric pressure to suggest the design of the barometer is an illustration of Fruitfulness

A barometer is a scientific instrument used to measure the air pressure in a certain environment. The atmospheric pressure measured is also known as barometric pressure. The pressure is measured in terms of atmosphere ( atm ) or bars. One bar / atm = 100 KPa

A glass tube closed at one end is submerged in a bowl filled with mercury and raised the tube but not above the mercury surface. The weight of the mercury pulled it down and left a partial vacuum at the closed end. This proved that gas has mass by creating pressure on things around it.  

Therefore, the ability of Torricelli's hypothesis about atmospheric pressure to suggest the design of the barometer is an illustration of Fruitfulness

To know more about Torricelli's hypothesis

https://brainly.com/question/17212070

#SPJ4

Competition from newly industrializing countries has also been blamed for rising unemployment in the OECD region.

This paper demonstrates that the widely accepted supply shock and real wage gap explanation of unemployment rate increases since 1973 has only limited empirical support.

The causes of unemployment are best understood by focusing on conflicts of interest in Western democracies, the distribution of power resources among major interest groups, and conflict strategies. Given economic constraints, unemployment appears to be the labor market manifestation of distributive conflict, with inflation and industrial disputes as alternatives.

Strategic action by government elites and long-term patterns in conflict resolution are major factors behind the two major transformations of Western unemployment levels – the introduction of full employment in the immediate postwar period and the return to high unemployment since 1973 – as well as variations in unemployment among the eighteen Western democracies.

To learn more about Cross-National and Long-Term Analysis refer to :https://brainly.com/question/27413958

#SPJ1

The temperature patterns under low emissions and high emissions differ from the medium emissions model by having different temperature rise.

A temperature pattern describes the temperature of  a place in Earth. It is highly influenced by the strength of the sun. The strength of the sun is highly dependent upon how high it rises in the sky during the day. It is also influenced by the emissions in the area which is responsible for global warming.

As the name suggests low emission model has lower emission, high emission model has high emission and medium emission model will have medium emission. As emission increase, the temperature will also increase. So there will be different temperature patterns in all these models.

Therefore, the temperature patterns under low emissions and high emissions differ from the medium emissions model.

To know more about temperature patterns

https://brainly.com/question/14661210

#SPJ4

The maximum acceleration of the truck when it carries load of 1000 kg is 0.67 m/s².

Given data :

Force moving the truck = empty truck mass x max. acceleration

= 2,000 kg x 1 m/s²

= 2,000 N

The force will remain the same even with a load of 1,000 kg because that is the maximum force the truck is capable of producing.

Therefore,

2,000 N = mass with load x acceleration

2,000 N = (2,000 kg + 1,000 kg) * acceleration

2,000 N = 3,000 kg × acceleration

=> acceleration = 2,000 N / 3,000 kg

=> acceleration = 0.67 m/s²

Its maximum acceleration will be 0.67 m/s².

Learn more about Finding acceleration refer to :

https://brainly.com/question/26408808

#SPJ1

The force is needed to make an 8kg object accelerate on a surface with a frictional force of 2.1n is  27.7 Newtons.

F = m x a

where

F = force exerted

m = mass of the object

a= the acceleration

m = 8 kg

a = 3.2m/s²

F = 8 x  3.2 = 25.6 N

So, net force required to overcome this friction and accelerate the object  =  25.6 + 2.1 = 27.7 Newtons

The given question is incomplete. complete question is :

how much force is needed to make an 8kg object accelerate at a rate of 3.2m/s²  on a surface with a frictional force of 2.1n.

The force is needed to make an 8kg object accelerate on a surface with a frictional force of 2.1n is  27.7 Newtons.

To know more about force

https://brainly.com/question/13942878

#SPJ4

The potential energy of the wooden log was converted into the kinetic energy of heat and light.

Potential energy is energy that is saved or conserved in an object or substance. This saved energy is based totally on the location, association or country of the object or substance. You could consider it as energy that has the potential to do work.

An item can store energy as the result of its function. for instance, the heavy ball of a demolition machine is storing power when it is held at an accelerated function. This saved electricity of role is known as capability electricity. similarly, a drawn bow is able to keep energy as the end result of its role.

Potential energy refers to the saved electricity within an item that exists due to the item's function, kingdom, or association. It's one of the  number one types of energy the opposite is kinetic energy. The saved electricity is released when the position, kingdom, or association of the object changes.

Learn more about potential energy here:- https://brainly.com/question/14427111

#SPJ4

0.03M is  the concentration of sodium hydroxide.

Here from calculation concentration of NaOH -

100×0.019/ 20 = .095 M

For acetic acid-

Volume acid used, V1= 25 ml

Concentration of acetic acid N1= ?

Volume of NaOH used, V2 = 8.99 ml

Concentration of NaOH used, N2= .095 M

From N1×V1= N2×V2

N1 = N2×V2 / V1

N1 = .095 × 8.99/25

N1 = 0.03M

concentration is the quantity of a material in a certain area. The ratio of the solute in a solution to the solvent or whole solution is another way to define concentration. In order to indicate concentration, mass per unit volume is typically used. The solute concentration can, however, alternatively be stated in moles or volumetric units. Concentration may be expressed as per unit mass rather than volume. Although concentration is often used to describe chemical solutions, it may be computed for any combination.

To know more about  concentration visit : https://brainly.com/question/22511666

#SPJ4

The speed of the rock right before it hits the water is 15.23 m/s.

The speed of the rock should follow a uniform motion. Uniform motion is an object's motion under acceleration. It should follow the rule

v' = v + a . t

v'² = v² + 2a . s

s = v . t + 1/2 . a . t²

where v' is final velocity, v is initial velocity, a is acceleration, t is time and s is displacement.

From the question above, we know that

s = 9.33 m

v = 7.01 m/s

a = g = 9.8 m/s²

By using the second equation, we can calculate the speed of  the rock right  before it hits the water

v'² = v² + 2a . s

v'² = 7.01² + 2 . 9.8 . 9.33

v'² = 232.0081

v' = 15.23 m/s

Find more on the speed at: https://brainly.com/question/28040370

#SPJ4

The wavelength of light will the first-order dark fringe is 1.205 μm.

Calculation:-

We know that, for the 1st order dark fringe, we have

y(dark,0 )= ( 0 + 1/2)*λ*L/d

0.00484 m =( 0.5*λ*3 ) /0.00037376

= λ =( 0.00484*0.00037376)/(0.5*3)

= λ = 1205*10^-9 m

= 1.205 μm

The wavelength of light determines its color and the wavelength of sound determines its pitch. Wavelength is the gap among two wave crests and the equal for wave troughs. Frequency is the variety of oscillations that bypass through a specific point in a single 2d, measured in cycles according to 2nd. the distance among peaks is called the wavelength.

Learn more about The wavelength here:- https://brainly.com/question/10728818

#SPJ4

An electric motor is a device used to convert electricity into mechanical energy—opposite to an electric generator.

(A) The weight of the motor should be considered as the 1000 N.

(B) It should be located like 1.2 m from the 400 N force.

Since

length of the board (R) = 2 m

force at one end (F1) = 400 N

force at other end (F2) = 600 N

Here we assume following things

let the distance of force F1 from the motor be = r

let the distance of force F2 from the motor be = r

So, r + r' = 2 m

a. here the weight should be

= 600 + 400

= 1000 N

b.

Since

F1 x r = F2 x r'

So,

here we have to recall that r + r' = 2

r' = 2 - r

now substituting r' = 2 -r into the equation

F1 x r = F2 x (2 - r)

So,

400r = 600(2-r)

400r = 1200 - 600r

400r + 600r = 1200

1000r = 1200

r = 1200/1000

r = 1.2 m

To learn more about electric motor refer to:

https://brainly.com/question/17384612

#SPJ4

The tension force on the string with a ball of mass 3.56 kg attached to it is 35 N.

Tension force is defined as the force transmitted through a rope, string or wire when pulled by forces acting from opposite sides.

To calculate the tension force in the string, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the tension force on the string is 35 N.

Learn more about tension force here: https://brainly.com/question/24994188

#SPJ1

The correct option is "they makes the work easier".

Machines make work easier even if they still require the same amount of work to be done.

We humans get tired because we do not have constant source of energy for the work to be done.

Machines have a constant source of energy such as electricity.

Humans too will work at the same rate without getting tired if they are also provided with constant energy.

What is a Machine?

A machine is a physical system that use power to exert forces, control motion, and perform an action. The phrase is widely used to describe man-made systems that utilize engines or motors, in addition to naturally existing biological macromolecules like molecular machines. Humans, animals, and unnatural forces like wind and water can all propel machines.

Chemical, thermal, or electricity may also be used to propel them. The actuator input of these machines is often shaped by a set of mechanisms to create a certain set of output forces and movements. They may also have mechanical components that monitor activity and plan movement. These components are typically referred to as computers and sensors.

Therefore, the machines help in making the work easier.

To know more about Machines : brainly.com/question/3135614

#SPJ4

The light will continue to travel at 34.8° with the normal. The result is obtained by using the Snell's Law.

The Snell's Law is a formula to describe the relationship between the angles of incidence and refraction when a light passes through two medias. It can be expressed as

ni / nr = sin θr / sin θi

Where

Note that the angles are measured from the normal line.

The critical angle can be expressed as

sin θc = ni / nr

If the critical angle is 53.7° and the light enters the substance from air at 45.0° with the normal, what angle with the normal will it continue to travel?

We can combine the above two formulas to find the refracted angle.

ni / nr = sin θr / sin θi

sin θc = sin θr / sin θi

sin 53.7° = sin θr / sin 45°

0.806 = sin θr / 0.707

sin θr = 0.707 × 0.806

sin θr = 0.570

θr = 34.8°

Hence, the light will continue to travel at 34.8° with the normal.

Learn more about Snell's Law here:

brainly.com/question/8757345

#SPJ4

This inquiry deals with the idea of semi-projectile motion. The equations for horizontal and vertical motion can be used to solve it.

"2.6 m/s" is the bare minimum horizontal velocity needed.

We'll start by examining the stunt person's vertical motion. To determine the motion's time interval, we shall apply the second equation of motion in the vertical direction.

You are looking for Vx0 (initial velocity in the X direction) use this formula

remember there is no acceleration in x direction, only Y

X = x0 + Vx0(t) + (1/2)at^2

X= 0 + Vx0 (t) + 0

x= Vx0 (t)

Vx0 = x/t

what we are missing is Time, so u can get this by using the Y formula to find the time

Remember there is no velocity in the Y direction

Y=y0 + Vy0(t) - (1/2)gt^2

y= 0 +0 - (1/2)gt^2

(3.0 m *2) / 9.80m/s/s = t^2

0.61224 = t^2

t = 0.78 s

now plug this time back into this formula from above

Vx0 = x/t

= 2.0m / 0.78s

=2.6 m/s

Hence the minimum horizontal velocity is 2.6m/s

To learn more about the velocity the link is given below:

https://brainly.com/question/7134967?

#SPJ4

The molecular shape or molecular geometry of electron pair repulsion is determined by the no of electron pair present.

The lightest known stable subatomic particle is the electron. It has an equal negative charge to that of 1.602176634 coulombs, which is regarded as the fundamental unit of electric charge. Only 1/1,836 of a proton's mass, or 9.1093837015 1031 kg, is present in the rest mass of the electron.

As a result, compared to a proton or neutron, an electron is thought to be almost massless, and its matter is not taken into account when determining an atom's mass number.

The quantity of electron pairs in a molecule affects its form. Electron pair interactions are typically repulsive. Electron couples align themselves to reduce their attraction to one another. It is assumed that the valence, or outermost, electron shell, is spherical

Therefore, the molecular shape or molecular geometry of electron pair repulsion is determined by the no of electron pair present.

To know more about Electron:

https://brainly.com/question/1255220

#SPJ1

Answer:

The difference between ohmic and non-ohmic conductor is that an Ohmic conductors have linear relationship between voltage and current, whereas the non-Ohmic conductors do not have linear relationship between voltage and current. The conductor is whether ohmic or non ohmic can be verified with Ohm's law.

Explanation:

An astronomer on Earth witnesses two spacecraft traveling apart from one another along an axis and passes through the earth at a relative speed of 0.70c.

Astronomers do research on planets, stars, and some other celestial objects. They employ both space-based technology, like the Hubble Space Telescope, and ground-based technology, such optical telescopes. Some astronomers investigate far-off galaxies and phenomena like black holes & neutron stars.

Astronomy, atmospheric science, physics, and astrobiology, the study of space biology, are some of the scientific fields that are most likely to result in employment at NASA. NASA employs 15 different categories of scientists, demonstrating the importance of scientists from all specialities in space research.

To know more about astronomers  visit:

https://brainly.com/question/16471213

#SPJ4

Answer:

Explanation:

Given:

ρ = 1 030 kg/m³ - Salt water density

h = 120.0 m - Submergence depth of the submarine

_____________________________

p - ?

Pressure:

p = ρ·g·h

p = 1030·9.8·120.0 ≈ 12·10⁶ Pa    or  p = 12 MPa

The lowest frequency of the standing waves is 8.37 Hz.

The lowest frequency of standing waves on a wire depends on the length of the wire and wave velocity. The speed of the waves can be calculated by using this formula

v = √( F . L / m )

where v is the speed of the waves, F is wire tension, L is the length of the wire and m is the mass of the wire.

The harmonic frequency of waves should follow

f = (n + 1) v / 2L

where f is the harmonic frequency, n is the order number

From the question above, the given parameters are

L = 10.5 m

m = 90 g = 0.09 kg

F = 265 N

n = 0

Find the speed of waves

v = √( F . L / m )

v = √( 265 . 10.5 / 0.09 )

v = 175.83 m/s

Find the lowest frequency

f = (n + 1) v / 2L

f = (0 + 1) 175.83 / 2 . 10.5

f = 8.37 Hz

Find more on lowest frequency at: https://brainly.com/question/14684474

#SPJ4

Answer:

NaCl (Sodium Chloride)

Explanation:

This is the answer

No, the bag does not hold in case of the maximum force a grocery sack can withstand and not rip is 250 n. if 20.0 kg of groceries are lifted from the floor to the table with an acceleration of 5.0 m/s^2.

The second law of motion of Newton describes how things behave when all external forces are not equal. The second rule states that an object's acceleration depends on both its mass and the net force acting on it. The acceleration of an item is defined by the net force acting on it and is inversely related to its mass.

Given,

Fₓ = 250

m = 20kg

[tex]a_{gravity}[/tex] = 9.81 m/s2

[tex]a_{pull}[/tex] = 5 m/s2

Fₙ = m(a+g)

Fₙ = 20 kg ( 5 m/s2 + 9.81 m/s2)

Fₙ = 20 (14.81)

Fₙ = 296.2

To know more about Newton's second law of motion, visit:

https://brainly.com/question/13447525

#SPJ4

When it is given that that star has 4 times the sun's mass then main sequence lifetime is calculated as: 312.5 * 10 ^6 million years.

A continuous and distinctive band of stars that appear on plots of stellar color versus brightness known as the main sequence. The color-magnitude plots are known as Hertzsprung–Russell diagrams.

The outer layers of star expand while the core is shrinking. As the expansion continues, the luminosity also increase.

Given mass of star is 4 times the sun, then

Main sequence lifetime is calculated as:

= 10^10 / 4^2.5

= 312500000

= 312.5 * 10 ^6 million years.

To know more about main sequence lifetime, refer

https://brainly.com/question/29052063

#SPJ4

Answer:

Explanation:

R₁ = 22 Ω

R₂ = 4.5 Ω

U = 45  V

Circuit resistance:

R = R₁ + R₂ = 22 + 4.5 = 26.5 Ω

Circuit current:

I = I₁ = I₂ = U / R = 45 / 26.5 ≈ 1.7 А

Lamp voltages:

U₁ = I₁·R₁ = 1.7·22 ≈ 37 V

U₂ = I₂·R₂ = 1.7·4.5 ≈ 8 V

Power:

P₁ = U₁·I₁ = 37·1.7 ≈ 63 W

P₂ = U₂·I₂ = 8·1.7 ≈ 14 W

P = U·I = 45·1.7 ≈ 77 W

Although air makes up more than half of a marshmallow's volume, sugar is the main ingredient. Gelatin or another ingredient that gels is beaten with a hot sugary syrup to create them.

To know about Air bubbles-

https://brainly.com/question/4412236

#SPJ4