Let X be a random variable that represents the weight of a single Grade A egg chosen at random. for the empty cardboard candy cane box weights, which had a mean of 22 grammes and a standard deviation
I What does X mean?
The expected value properties show that E(W) = E(P)+ E(X1) + + E(X12) This results in E(W) = E(P) + 12 E since the mean weight of all 12 eggs is the same (X;). In light of the information that E(W) = 840 and E(P) = 20, we can use the equation 840 = 20 + 12 E(X;) to determine E(X;) 840-20 12 68.33 grammes.
Secondly, what is X's standard deviation?
Properties of variance prove that Var (W) = Var (P) + Var (X1) + Var (X2) +... + Var due to independence (X12).
This equals Var(W) Var(P) + 12 x Var since the variance of the weights of all 12 eggs is the same (X;).
SD (W) was given a value of 7.9 and SD (P) a value of 1.7. Var (W) = 7.92 = 62.41, and Var (P) = 1.722 = 2.89, as a result.
Var (X,) = = SD(X)=(496)2.23 grammes may be obtained by solving 62.41 = 2.89 + 12 x Var(X,).
Learn more about Standard deviation here:
https://brainly.com/question/30217035
#SPJ4
Look at the shape of the last force vs. time graph. Is the peak value of the force significantly different from the average force? Is there a way you could deliver the same impulse with a much smaller force?
There is no method to give the same impulse with a substantially smaller maximum force, even though the peak value of the force differs significantly from the average force.
How can the average force be determined from a force vs. time graph?By dividing the area under the force vs. time curve by the time, one can determine the average force (the base of the triangle in this case). As a result, the height of a triangular profile is just the peak force, and the average force is 1/2 the height.
What is the connection between time and force?The change in momentum over time is measured by force. It can be expressed as F = mass x velocity change / time.
To know more about force visit:-
https://brainly.com/question/13191643
#SPJ4
FILL IN THE BLANK The first step you should take to decelerate is to _______.
Answer:
If you are reffering to a manual transmission, the first step would be to press the clutch.
Answer: Release pressure on the accelerator
Explanation:
A jet airplane reaches 658. km/h on a certain flight. What distance does it cover in 10.0 min? Set the math up. But don't do any of it. Just leave your answer as a math expression. Also, be sure your answer includes all the correct unit symbols. distance =
The distance traveled by airplane which has a speed of 10.97km/min is 109.7 km
The speed of the airplane = 658 km/h
= 658 / 60 km/min
= 10.97 km/min
The time taken by the airplane = 10 min
The distance traveled by airplane can be found using the formula,
s = d/t
where s is the speed of the airplane
d is the distance traveled by airplane
t is the time taken by the airplane
Let us rearrange the above equation,
d = s x t
Let us substitute the known values in the above equation, we get
d = 10.97 x 10
= 109.7 km
Therefore, the distance traveled is 109.7 km
Learn more about the speed in
https://brainly.com/question/7359669
#SPJ4
an object of mass 0.5kg is given an initial velocity and then slides across a horizontal surface. the object experiences a resistive force that is a function of velocity. the velocity v of the object as a function of time t is given by v(t) = ae-B, where a = 2 m/s and B = 35?.. Which of the following is a correct expression for the net force, in newtons, exerted on the object as a function of time? (A) -6e-3 (B) -3e-34 (C) (D) 2e- 2 (E 3(1-2-4)
The correct expression for the net force, in Newtons, exerted on the object as a function of time is (D) 2e-2.
Which of the following is a correct expression for the net force, in newtons, exerted on the object as a function of time?The net force experienced by the object as a function of time is given by F(t) = ma + f(v).Here, m is the mass of the object and a is its initial acceleration.The resistive force is given by f(v) = -Bv, where B is a constant.Therefore, the net force, in newtons, exerted on the object as a function of time is F(t) = ma - Be-Bt.Simplifying the equation, we get F(t) = -(mB + a)e-Bt.Substituting the given values of m, a, and B, we get F(t) = -3e-35.Thus, the correct expression for the net force, in newtons, exerted on the object as a function of time is -3e-35.To learn more about The correct expression for the net force, in Newtons refer to:
https://brainly.com/question/2648301
#SPJ4
according to gay-lussac's law, the pressure of a gas varies directly with its temperature when volume is held constant.
According to Gay Lussac's Law, a given volume of gas kept at a fixed pressure will have a pressure that is directly proportional to its Kelvin temperature.
What does pressure directly vary with according to Gay-Lussac's law?According to Gay Lussac's Law, a given volume of gas kept at a fixed pressure will have a pressure that is directly proportional to its Kelvin temperature.A gas's molecules receive more energy when it is heated, which causes them to move more quickly.Additionally, the pressure will rise as a result of increased collisions on the container's walls.By maintaining a constant volume, Gay-Law Lussac's states that for a given mass of gas, the pressure fluctuates in a direct proportion to the absolute temperature of the gas.Increases in temperature and pressure of a sample of gas in a rigid container are correlated.To learn more about Gay Lussac's Law refer
https://brainly.com/question/2683502
#SPJ4
What is the momentum of a 0.15 kg ball moving at 4 m/s?
Answer:
mass of ball:0.5
acceration:4m/
force:?
we know that,
f:ma
:0.5×4
:2 newton
. determine the magnitude and coordinate direction angles of the resultant of the two forces acting at point a.
The magnitude is 756.72 N and the coordinate direction angles of the resultant of the two forces acting at point A are alpha([tex]149^{0}[/tex]), beta([tex]0^{0}[/tex]), and gamma([tex]59^{0}[/tex]).
What do you mean by resultant force?The resultant force is the overall force acting on an object, which is the vector sum of all the individual forces acting on the object. It is the net force that determines the motion of an object. In other words, it is the force that would have the same effect on the object's motion as all the individual forces combined. The direction of the resultant force is the direction of the net force and the magnitude is the sum of the magnitudes of the individual forces.
Given,
A = (5, 0, 0) m
B = (0, 2, 3) m
C = (0, -2, 3) m
AB = B - A = -5i + 2j + 3k
[tex]AB_{cap}[/tex] = [tex]\frac{-5i+2j+3k}{\sqrt{5^{2}+2^{2}+3^{2} } } =\frac{-5i+2j+3k}{6.16}[/tex]
AC = C - A = -5i - 2j + 3k
[tex]AC_{cap} =\frac{-5i+2j+3k}{6.16}[/tex]
Fb = 400 (-5i + 2j + 3k ) / 6.16[tex]F_{b} =\frac{400(-5i+2j+3k)}{6.16} =-324.44i+129.78j+194.67k \\F_{c}=\frac{400(-5i+2j+3k)}{6.16}= -324.44i-129.78j+194.67k[/tex]
[tex]F_{net} =F_{b} +F_{c}[/tex]= - 648.88i + 389.33k N
Magnitude = |[tex]F_{net}[/tex]| = [tex]\sqrt{648.88^{2}+389.33^{2} } =756.72N[/tex] .......Ans
Coordination angles,
alpha = [tex]cos^{-1} \frac{F_{net} x}{|F_{net}| } =149^{0}[/tex]
beta = [tex]cos^{-1}\frac{F_{net}y }{|F_{net} |} =0^{0}[/tex]
gamma = [tex]cos^{-1}=\frac{F_{net}z }{|F_{net} |} =59^{0}[/tex]
To know more about force visit:
https://brainly.com/question/13014979
#SPJ4
The complete question is given below:
A student walks up a hill. The student’s friend has the same mass and walks up the same hill, but completes the journey in less time. Which statement is true about the situation?
Since they both expended the same amount of energy, the statement that is true about the situation is: The student's friend developed more power than the student.
The correct option is C.
What is mechanical power?The rate at which mechanical energy can be given to a system is known as mechanical power. Remember that power is the transfer of energy over a given period of time. Although it can also be measured in watts, mechanical power is frequently expressed in horsepower.
Mathematically;
Power = work done/time taken
Since the student's friend walks up the hill at a faster rate, he developed more power than the student.
Learn more about mechanical power at: https://brainly.com/question/30100581
#SPJ1
Complete question:
A student walks up a hill. The student’s friend has the same mass and walks up the same hill, but completes the journey in less time. Which statement is true about the situation?
a. The student developed more power than the friend
b. The student expended more energy than the friend
c. The student's friend developed more power than the student
d. The student's friend expended more energy than the student
looking at the plot, i determined that the explorer 35's orbit is 11,400 km* across its long dimension. use this distance to find the orbit's semimajor axis in kilometers.
The semimajor axis of Explorer 35's orbit is 5,700 km. The semimajor axis of Explorer 35's orbit is half the long dimension of 11,400 km.
What is orbit's semimajor axis?The semimajor axis of an orbit is the longest radius of the ellipse that is described by the orbit. It is also half of the sum of the periapsis and apoapsis distances. The semimajor axis can be used to calculate the orbital period of an object in an orbit around a given primary body. For example, for an object in a circular orbit around a star, the orbital period can be calculated as T = 2π√a^3/μ, where a is the semimajor axis and μ is the standard gravitational parameter of the star. The semimajor axis is also used to calculate the energy of an object in orbit around a given primary body. For a two-body system, the energy of the object can be calculated as E = -μ/2a, where a is the semimajor axis and μ is the standard gravitational parameter of the primary body. The semimajor axis can also be used to calculate the angular momentum of an object in orbit around a given primary body. For a two-body system, the angular momentum of the object can be calculated as L = μa^2, where a is the semimajor axis and μ is the standard gravitational parameter of the primary body.To learn more about semimajor axis refer to:
https://brainly.com/question/26662489
#SPJ4
A block is dropped from a high tower and is falling freely underthe influence of gravity. Which one of the following statements istrue concerning this situation? Neglect air resistance.
The kinetic energy increases by equal amounts over equaldistances.
The true statement concerning this situation is the total energy of the block increases by equal amounts over equal distances
What is the velocity of the block at the moment it hits the ground?The velocity of the block when it hits the ground depends on several factors, such as the initial height of the tower, the mass of the block, and air resistance. In the absence of air resistance, the velocity of the block at the moment it hits the ground is equal to the square root of twice the acceleration of gravity multiplied by the height from which it was dropped. Since the acceleration of gravity is approximately 9.81 meters per second squared, the velocity of the block at the moment it hits the ground can be calculated as follows:Velocity = √2 * 9.81 * HeightFor example, if the block was initially dropped from a height of 100 meters, its velocity at the moment it hits the ground would be approximately 44.3 meters per second. However, if the block is falling through air, the velocity may be slightly lower due to air resistance. Air resistance is a force that acts in the opposite direction to the motion of the block, reducing its velocity over time. The magnitude of air resistance depends on the size and shape of the block, as well as its velocity. If the block is falling at a high velocity and has a large surface area, air resistance can be quite substantial.To learn more about acceleration of gravity refer to:
https://brainly.com/question/88039
#SPJ4
A rectangular container measuring 17 cm ⨯ 52 cm ⨯ 67 cm is filled with water. What is the mass of this volume of water in kilograms and grams?
The mass of the water in the rectangular container measuring 17 cm x 52 cm x 67 cm is approximately 4,849.8 kg or 4,849,800 g.
What is the volume of the container in cubic centimeters?The volume of the container in cubic centimeters is calculated by multiplying its length, width and height together. In this case, the dimensions of the container are 17 cm, 52 cm and 67 cm. To find the volume, we multiply these three numbers together: 17 cm x 52 cm x 67 cm = 62876 cm^3. This is the total volume of the container in cubic centimeters. We can use this information to calculate the mass of the water in the container, by multiplying the volume by the density of water.
To know more about Length visit: https://brainly.com/question/8552546
#SPJ1
A spaceship hovering over the surface of Venus drops an object from a height of 33 m. How much longer does it take to reach the surface than if dropped from the same height on Earth? Neglect air resistance in both cases. [The acceleration due to gravity on Venus is 90.7% of that on Earth,
gVenus = (0.907)g.]
laws of motion notes
Newton's Laws of motion are: an object at rest remains at rest, and an object in motion remains in motion at constant speed and in a straight line. The acceleration of an object is determined by its mass and the amount of force applied. When one object applies a force to another, the second object applies an equal and opposite force to the first.
What are Newton’s Laws of Motion?Sir Isaac Newton contributed to physics and mathematics in a variety of ways. At the age of just 23, he created the theories of gravitation in 1666. In the "Principia Mathematica Philosophiae Naturalis," published in 1686, he presented his three laws of motion.
Newton revolutionised science by formulating his three laws of motion. Planets move in elliptical orbits as opposed to circles because of Newton's laws and Kepler's laws.
Newton's Laws of motion are
An object at rest remains at rest, and an object in motion continues to move in a straight line at a constant speed unless it is affected by an unbalanced force. The mass of an object and the strength of the applied force determine its acceleration. When one object exerts force on another, the second object exerts a force that is equal to and opposing that exerted by the first object.Learn more about Laws of motion
https://brainly.com/question/29227937
#SPJ1
use the relationships you found to determine the velocity that would be obtained if your apparatus had 40 washers.
The velocity for 40 washers would be 40 x 0.4 = 16 m/s.
Newton's Second Law of Motion
Newton's Second Law of Motion states that the acceleration of an object is proportional to the net force acting upon it and inversely proportional to its mass.
This question uses the concept of Newton's Second Law of Motion,
In this case, the acceleration is caused by the force of gravity acting on the washers, and the mass of the washers remains constant.
As the number of washers increases, the force of gravity increases as well, resulting in a higher acceleration and thus a higher velocity.
Steps are given below
1. Calculate the velocity for each number of washers: Start by calculating the velocity for each number of washers.
To do this, multiply the number of washers by the slope of the linear regression line (0.4 m/s/washer).
2. Find the velocity for 40 washers: Once you have the velocities for each number of washers, you can use this to determine the velocity for 40 washers.
To do this, multiply the number of washers (40) by the slope of the linear regression line (0.4 m/s/washer).
This gives us 40 x 0.4 = 16 m/s.
To learn more about Newton's Second Law of Motion refer :
brainly.com/question/30330719
#SPJ4
How could electrical energy and kinetic energy be
used to cool your tree house?
Examine the heating curve for water in Section 12.7 (Figure 12.36 ). Explain why the curve has two segments in which heat is added to the water but the temperature does not rise.
The curve has two segments in which heat is added to the water but the temperature does not rise is because:
Horizontal lines reveal phase changes.All of the energy is used to completely change in between phases.What is heating curve?The temperature difference between the outside air temperature and the supply temperature of the heating system is known as the heating curve. According to the heating curve, the CH boiler must heat the water to a specific temperature at a specific outdoor temperature. Two parameters—the curve's slope and level—are used to describe this relationship.
The so-called "Stoker's table," which assisted in determining the required supply temperature of the heating system based on outside temperature, served as the prototype for the heating curve. Due to the weather-based control, which modifies the supply temperature in accordance with the outside temperature, a heating curve is automatically applied.
Learn more about heating curve
https://brainly.com/question/27018999
#SPJ4
Complete question:
Examine the heating curve for water in Section 11.7 (Figure 11.36). Explain why the curve has two segments in which heat is added to the water but the temperature does not rise.
if you are located in the northern hemisphere, which of the following correctly describes a relationship between the sky and your location? if you are located in the northern hemisphere, which of the following correctly describes a relationship between the sky and your location? the longitude of the north celestial pole is circumpolar, and therefore crosses your zenith at the meridian. the altitude of the north celestial pole equals your latitude. the altitude of the celestial equator equals your latitude. the altitude of the north celestial pole equals your longitude.
if you are located in the northern hemisphere: The altitude of the north celestial pole equals your latitude.
What is celestial pole?The geographic North Pole of the Earth is carried into space by the Northern Celestial Pole. The celestial pole serves as a crucial point of reference in the equatorial co - ordinate system since the celestial meridian and the star's hour circles both pass through it. The north celestial pole is only 0.5° away from the polestar. The two places in the sky where the axis of rotation of the Earth crosses the celestial sphere are known as that of the north and south celestial poles. For observers at Earth's North Pole and South Pole, respectively, the north and south celestial poles appear to be always straight overhead.
correct option: The altitude of the north celestial pole equals your latitude.
To know more about celestial pole refer to:
https://brainly.com/question/28515366
#SPJ4
If two cars leave from two different cities 50 miles apart and one car is going 50 mph and the other car is going 60 mph, at what time will they meet?
The relative speed of one car in relation to another changes as the cars approach one another. Therefore 150 miles
How do you calculate the time two cars meet?The relative speed of one car in relation to another changes as the cars approach one another.
On parallel roadways, two cars that are 150 miles apart begin to travel in the same direction.
The first car travels at an average speed of 60 miles per hour.
The second car is traveling at an average speed of 55 mph.
Net speed, or relative speed, is 150 miles per hour (60 + 55).
Allow 't' seconds for the automobiles to pass each other.
60 + 55 =150
Therefore, the formula will be 60t + 55t = 150.
We can resolve this if you want to.
t = 1.30
To learn more about cars time refer
https://brainly.com/question/13410350
#SPJ4
assume there is negligible friction between each block and the surface. (a) indicate whether the speed of the center of mass of the two-block system is either constant or not constant during the time interval from t1 to t2, and explain why.
The speed of the center of mass of the two-block system is not constant during the time interval from t1 to t2. Since the block system experience external force by a spring causes acceleration of block A.
When a system is subjected to an external force, the centre of mass shifts as if?The centre of mass of a system remains stationary or moves at constant speed if it has already moving if there is no external force that acts on the system. The centre of mass accelerates in the presence of an external force in accordance with the formula F = ma.
Can the centre of mass be moved without an outside force?The centre of mass of a system of particles will not move if there is no external force that acts on them.
What variables affect the centre of mass?The mass of the rigid body, the distance of the mass from an axis, the system's axis, and the distribution of mass all influence where the centre of mass is located.
Learn more about mass here:
brainly.com/question/29576405
#SPJ4
The figure above shows Case 1 of an experiment. Initially, block A is held in place while in contact with a horizontal spring with spring constant that is compressed a distance and fixed to a wall.
The following events occur.
At time t1, the block A released from restAt time t2, the ideal spring reaches it uncompressed length, and block A leaves the springAt time t3, Block A colloid with and sticks to ideal block B, which is initially at restAt time t4, Block A and Block B slides together along the surface.assume there is negligible friction between each block and the surface.
A) Indicate whether the speed of the center of mass of the two-block system is either constant or not constant during the time interval from t1 to t2, and explain why.
which of the following indicates that different rocks in the same area might weather differently? select the two correct answers. (1 point)
The weathering processes of cliffs with ridges and smooth plain in the same area might be different hence options A and D are the correct answers.
Weathering describes the process of breaking down or disintegration or dissolving of rocks and minerals on the surface of the Earth. Water, ice, plants, animals, acids, salts, and changes in temperature are all agents of the process of weathering.
Mechanical weathering, also called a physical weathering or disaggregation, causes the rocks to crumble. Water, in either in the liquid or the solid form, is often the key agent of mechanical weathering.
Chemical weathering is process of changes in the molecular structure of rocks and soil. For an instance, carbon dioxide from the air or the soil sometimes, combines with water in a process called carbonation.
Biological weathering is the process where rocks are weaken or disintegrated by plants, animals or microbes.
The weathering processes on a smooth plain and on a cliff with ridges require the Mechanical Weathering and Biological/Chemical Weathering respectively.
Learn more about weathering processes here:
https://brainly.com/question/9621344
#SPJ4
The correct question should be:
Which of the following indicates that different rocks in the same area might weather differently? Select the two correct answers.
A. Cliffs with ridges
B. Rock pillars in the middle of grassy plains
C. The rock atop a newly formed Mountain
D. A smooth plain
Which of the following is a possible set of quantum numbers for a 4f orbital? a) n = 4,1 = 2, m = 0 b) n = 4,1 = 1, m = 2 c) n = 4,7 = 1, m = -1 d) n = 4,1 = 3, mı = 0 e) n = 4,1 = 3, m = 4
The set of quantum numbers for a 4f orbital is n=4,l=3,m=−3to3, s=±1/2. Hence, the answer to the question would be Option D.
The three quantum numbers are described below:
The principal quantum number (n) - describes the size of the given orbital. Orbitals for which n = 2, are larger in size than those for which n = 1, for example. This is because they have opposite electrical charges, electrons (negatively charged) are attracted to the nucleus (positively charged) of the atom. Energy must therefore be absorbed to excite/move an electron from the lower orbital in which the electron is close to the nucleus (n = 1) into a upper orbital in which that electron is further from the nucleus (n = 2). The principal quantum number thus, indirectly describes the energy of an orbital.
The angular quantum number (l) - describes the shape of an orbital. Orbitals have shapes that are generally described as spherical (l = 0), polar (l = 1), or cloverleaf (l = 2). They can even take on even more complex shapes as the value of the angular quantum number (l) becomes larger.
The magnetic quantum number (m) - there is only a single way in which a sphere (l = 0) can be oriented in space. However, orbitals that have polar (l = 1) or cloverleaf (l = 2) shapes, can point in different directions. Therefore, we need a third quantum number to describe the orientation in space of a particular orbital. (It is called by the name magnetic quantum number because the effect of different orientations of the orbitals was first observed in the presence of a magnetic field.)
For 4f orbitals : n = 4,
l = 3,
m = −3 to 3, and
s = ±1/2
Hence, after checking for the values, we get option D as the answer.
Learn more about 4f orbitals here:
https://brainly.com/question/28392889
#SPJ4
When the space shuttle is launch from earth the rocket engines burn fuel and apply a constant force on the shuttle until they burn out. Explain why the shuttles acceleration increases while the rocket engines are burning fuel
The space shuttle is launched from Earth with the help of rocket engines, which burn fuel to generate thrust.
Why the acceleration increases?As the rocket engines burn fuel, they apply a constant force on the shuttle, which causes it to accelerate.The acceleration of the shuttle increases as the rocket engines continue to burn fuel, because the force applied by the engines is greater than the force of gravity pulling the shuttle back down to Earth.Additionally, as the rocket engines burn fuel, the mass of the shuttle decreases, which also contributes to the increase in acceleration.The acceleration of the shuttle will continue to increase until the rocket engines burn out, at which point the thrust from the engines will decrease and the force of gravity will begin to dominate, causing the shuttle to slow down and eventually reach a steady state velocity.To learn more about acceleration refer:
brainly.com/question/605631
#SPJ4
if a boiler has a stack temperature of 475 degrees f and the temperature of the air entering the furnace is 84 degrees f, how much heat is being lost to the atmosphere per pound of fuel burned? (note: the specific heat of the gases of combustion is .24 btu/lb.)
The heat that is being lost to the atmosphere per pound of fuel burned is 93.84[tex]\frac{btu}{lb}[/tex].
The amount of thermal energy required to raise a sample's temperature by 1 K when it weighs 1 kg is known as its specific heat.
When a substance, especially a gas, is heated while being allowed to expand (specific heat capacity at constant pressure) as opposed to being heated in a closed vessel that forbids expansion, its specific heat capacity may be much larger (specific heat capacity at constant volume).
Now, the formula that has to be used is
[tex]Q=mc\triangle T[/tex]
here we have to found heat per pound so mass is not needed
C is given 0.24
and temperature difference is 475-84 =391
So just put all the variable in formula
[tex]Q=391\times 0.24=93.84[/tex]
So, the heat loss is 93.84[tex]\frac{btu}{lb}[/tex].
Learn more about heat
brainly.com/question/1429452
#SPJ4
While exploring a sunken ocean liner, the principal researcher found the absolute pressure on the robot observation submarine at the level of the ship to be about 413 atmospheres. The inside of the submarine is kept at atmospheric pressure. The density of seawater is 1025 kg/m3 (a) Calculate the gauge pressure on the sunken ocean liner. . (b) Calculate the depth of the sunken ocean liner. (c) Calculate the magnitude of the net force due to the fluid pressures only on a viewing port of the submarine at this depth if the viewing port has a surface area of 0.0100 m2 (d) What prevents the ‘net force’ found in part c from accelerating and moving the viewing port. . Suppose that the ocean liner came to rest at the surface of the ocean before it started to sink. Due to the resistance of the seawater, the sinking ocean liner then reached a terminal velocity of 10.0 m/s after falling for 30.0 s. (e) Determine the magnitude of the average acceleration of the ocean liner during this period of time. (f) Assuming the acceleration was constant, calculate the distance d below the surface at which the ocean liner reached this terminal velocity. (g) Calculate the time t it took the ocean liner to sink from the surface to the bottom of the ocean.
(a)Gauge pressure is 412 atmospheres ; (b) depth = 4.24 x 10^2 m. (c)magnitude of the net force = 4.13 x 10^2 N. (d) viewing port is made of strong material that can withstand the high pressure (e)magnitude of the average acceleration = 0.333 m/s^2 (f) d=498.5m (g) t= 29.94 s.
What is gauge pressure?Gauge pressure is the pressure of a system above the atmospheric pressure.
(a) Since the inside of the submarine is kept at atmospheric pressure, gauge pressure on the sunken ocean liner is 413 atmospheres - 1 atmosphere = 412 atmospheres.
(b) P = ρgh, where P is pressure, ρ is density of seawater, g is acceleration due to gravity, and h is depth. Given P = 413 atmospheres, ρ = 1025 kg/m3, and g = 9.8 m/s^2. Therefore, h = P/(ρg) = 413 atmospheres / (1025 kg/m3 * 9.8 m/s^2) = 4.24 x 10^2 m.
(c) As, F = PA, where F is force, P is pressure, and A is area. Given, P = 413 atmospheres and A = 0.0100 m^2. So, F = PA = 413 atmospheres * 0.0100 m^2 = 4.13 x 10^2 N.
(d) The viewing port is made of a strong material like glass or acrylic that can withstand the high pressure of the surrounding seawater.
(e) As, v = at, where v is final velocity, a is acceleration, and t is time. We know that v = 10.0 m/s and t = 30.0 s. So, a = v/t = 10.0 m/s / 30.0 s = 0.333 m/s^2
(f) d = 1/2at^2 to find the distance. d = 1/20.333*30^2 = 498.5m
(g) v^2 = u^2 + 2as, where u is initial velocity, v is final velocity, a is acceleration and s is distance. s = (10^2 - 0^2)/(2*0.333) = 299.4 m. So, time t = s/v = 299.4/10 = 29.94 s.
To know more about gauge pressure, refer
https://brainly.com/question/29341536
#SPJ4
a class of physics students is investigating projectile motion using a variety of equipment assumer air resistance can be ignored in all cases. onge group constructs a long ramp as showin ramp 1 below
A group of physics students investigating projectile motion using a long ramp as shown in ramp 1 (below) may be able to study the following aspects of projectile motion
What are the equipment used to assume air resistance for investigating projectile motion?The effect of launch angle on the range of a projectile: By adjusting the launch angle of the projectile, the students can study how the range of the projectile is affected.The effect of launch velocity on the range of a projectile: By adjusting the launch velocity of the projectile, the students can study how the range of the projectile is affected.The effect of launch angle and launch velocity on the maximum height of a projectile: By adjusting both the launch angle and launch velocity of the projectile, the students can study how the maximum height of the projectile is affected.The relationship between the range and maximum height of a projectile: By measuring the range and maximum height of a projectile for different launch angles and launch velocities, the students can study the relationship between these two variables.The time of flight of a projectile: By measuring the time it takes for a projectile to travel from the top of the ramp to the ground, the students can study the time of flight of a projectile.In summary, a group of physics students investigating projectile motion using a long ramp as shown in ramp 1 may be able to study the effect of launch angle and launch velocity on the range and maximum height of a projectile, the relationship between the range and maximum height of a projectile, and the time of flight of a projectile.To learn more about projectile motion refer:
brainly.com/question/24216590
#SPJ4
if something weighs more and there falling at the same speed do they have the same amount of kinetic energy?
The kinetic energy of an object is determined by its mass and velocity. Two objects falling at the same speed will have the same kinetic energy if they have the same mass.
What is kinetic energy?However, if one object has a greater mass than the other, it will have more kinetic energy.To understand this, it is important to know that kinetic energy is calculated using the formula: KE = (1/2) * m * v^2.Here are the main points:Kinetic energy is determined by mass and velocity.Two objects falling at the same speed will have the same kinetic energy if they have the same mass.An object with a greater mass will have more kinetic energy than one with less mass, even if they are falling at the same speed.Kinetic energy is calculated using the formula: KE = (1/2) * m * v^2where m is the mass of the object and v is its velocity.To learn more about kinetic energy refer:
brainly.com/question/25959744
#SPJ4
Bob, Nora, and Clara are discussing a problem in which the pressure and temperature of the air in a bicycle tire were given. The question asked for the new pressure on a much warmer day when the volume of the tire was the same as before. In the book, the pressures were given in units of psi (pounds per square inch), and the solution used the equation P, =P and kept the pressure in units of psi. Part of the students dialogue is given below. Clara: This really confuses me. I thought that pressure and volume had to be in the right units. Nora: It s okay to measure pressure in units of psi because we were talking in terms of air in a tire, psi works better for the pressure unit. It s more convenient, Bob: I just assumed it was OK to use psi as units since pressure is on both sides of the constant volume equation, so the units cancel. Clara: Oh, yeah. That must be right. So the pressure could be in mm of Hg and it would still work, right? Bob: I think so. Nora: But then why did we have to convert the temperature from Celsius to Kelvin? Temperature son both sides of the equation, too. I still don t get it. In 2-3 thoughtful and complete sentences, help Nora out: Why is it OK to keep the pressure in units of psi (not m) but its not OK to keep the temperature in Celsius? If you are puzzled, please explain clearly what it is that puzzles you.
We must multiply a conversion factor to convert pressure from one unit to another and a factor of 273 must be added to convert temperature from Celsius to Kelvin.
Explain in detail how the pressure and temperature are converted?We have pressure on both sides of the equation for pressure and temperature. As a result, the conversion factor is wiped out, and we may utilise pressure in any unit. In order to convert temperature from Celsius to Kelvin, we must add a factor of 273. As a result, the answers for Celsius and Kelvin are not the same. We use Kelvin instead of Celsius since it is a standard unit.
What is the relationship between pressure and temperature?Temperature and pressure are found to be linearly related. If the temperature is on the Kelvin scale, P and T are directly proportional and increases by a particular amount, just as the gas pressure.
To learn more about pressure, refer to:
brainly.com/question/29341536
#SPJ4
In class, we discussed angular acceleration and tangential acceleration. Describe how the simulation can be used to find each for the bugs in Ladybug Revolution.
The simulation can be used to find both angular and tangential acceleration for the bugs in Ladybug Revolution.
Describe how the simulation can be used to find each for the bugs in Ladybug Revolution?Angular acceleration can be found by calculating the change in angular velocity over time.This can be done by measuring the angle that the bug rotates and the time it takes for the bug to rotate that angle.Tangential acceleration can be found by measuring the change in velocity over time, which can be done by measuring the distance the bug travels and the time it takes for the bug to travel that distance.In the Ladybug Revolution simulation, angular acceleration and tangential acceleration can be calculated for the bugs by observing their motion in the simulation. Angular acceleration is a measure of the rate of change in angular velocity and is calculated by observing the bug’s angular velocity over time. To calculate angular acceleration, the angular velocity of the bug at two different points in time is recorded and then the difference between these velocities is divided by the time interval between the two points.Tangential acceleration is a measure of the rate of change in linear velocity and is the product of the angular acceleration and the radius of the bug’s path. To calculate tangential acceleration, the angular acceleration of the bug is multiplied by the radius of its path. This will give the tangential acceleration of the bug as it moves around the Ladybug Revolution simulation. By recording both angular acceleration and tangential acceleration over time, one can observe the bug’s motion in the simulation and analyze its motion more accurately.To learn more about angular acceleration and tangential acceleration refer to:
https://brainly.com/question/13014974
#SPJ4
Suppose you go from the earth to a planet where the acceleration of gravity is 3 m/s2. On the new planet your mass willA. be 1/3 its value on EarthB. be 9 times its value on EarthC. be 3/10 its value on EarthD. not change
If we go from Earth to a planet where the acceleration of gravity is 3 m/s2 then it does not change.
An object acted on by only the force of gravity, on or near Earth's surface, which accelerates downward at the rate of about 9.8 m/s² without air resistance.
Acceleration due to gravity can be defined as the constant acceleration which is produced in a body when a body falls freely under the effect of gravity alone.
It is represented with the letter g and has a value of 9.8 m/s^2 on the surface of the earth.
This acceleration is gained by an object due to the gravitational force.
Learn more about acceleration:
brainly.com/question/29135987
#SPJ4
which of the following is an antiderivative of quantity of x squared plus 1 over x close quantity squared question mark
The antiderivative of x² + 1/x² is (1/3)x³ + x + C.
What is meant by antiderivative?An antiderivative, also known as an indefinite integral, is a mathematical operation that finds a function whose derivative is equal to a given function. This operation is the opposite of the derivative, which is a measure of the rate of change of a function at a given point. The antiderivative is used to solve problems in calculus and other branches of mathematics that involve integrals, which are the area under a curve. For example, in integration by parts, one must find the antiderivative of a function before it can be integrated. Antiderivatives are also used to find the area bounded by a curve, to determine the length of a curve, to calculate the volume of a solid of revolution, and to solve differential equations. Antiderivatives can be calculated by using the rules of calculus, such as the Fundamental Theorem of Calculus, integration by parts, and substitution. In addition, there are other methods, such as integration by parts, integration by substitution, and numerical integration.To learn more about antiderivative refer to:
https://brainly.com/question/27830377
#SPJ4
