Answer:
rooting reflex
Explanation:
prettysure
1) A plane's velocity increases from 40 m/s to 100 m/s over a 10 second interval. What is the plane's average acceleration for this interval? *
Answer:
average acceleration = 6 [tex]\frac{m}{s^2}[/tex]
Explanation:
Recall that the average acceleration [tex](a)[/tex] is defined by the change in velocity from an initial velocity [tex](v_i)[/tex], to a final velocity [tex](v_f)[/tex] over the time (t) it took that change to happen. Then, in mathematical terms this is:
[tex]a=\frac{v_f-v_i}{t}[/tex]
with our information this becomes:
[tex]a=\frac{v_f-v_i}{t} = \frac{100-40}{10}=6\,\frac{m}{s^2}[/tex]
What are 1A, 3B, and 7A examples of on the periodic table?
groups.
numbers
periods
rows
Answer:
groups
Explanation:
I got a 100 on my quiz
Answer:
It's groups
Explanation:
2020 quiz
An engineering team has a goal of installing new, more efficient solar panels
on the International Space Station. Which equation best describes a cost-
benefit analysis the team might perform?
O A. Improved efficiency - manufacturing expenses + fuel to reach
orbit = net benefit
O B. Improved efficiency + manufacturing expenses - fuel to reach
orbit = net benefit
C. Improved efficiency + manufacturing expenses + fuel to reach
orbit = net benefit
O D. Improved efficiency - manufacturing expenses - fuel to reach
orbit = net benefit
Answer:
Answer is D
Explain:
Just did it on Abex
The equation best describes a cost-benefit analysis for installing new, more efficient solar panels on the International Space Station which the team might perform is Improved efficiency - manufacturing expenses - fuel to reach orbit = net benefit.
What are solar panels?A panel designed to absorb the sun's rays as a source of energy for generating electricity or heating. Solar technologies convert sunlight into electrical energy either through photovoltaic (PV) panels or through mirrors that concentrate solar radiation. This energy can be used to generate electricity or be stored in batteries or thermal storage.
What are advantages of solar power?The advantages of solar power are:
Solar power is pollution-free and causes no greenhouse gases to be emitted after installation.Reduced dependence on foreign oil and fossil fuels.Renewable clean power that is available every day of the year, even cloudy days produce some power.What is meant by cost-benefit analysis?A cost-benefit analysis is the process of comparing the projected or estimated costs and benefits (or opportunities) associated with a project decision to determine whether it makes sense from a business perspective.
The Elements of Cost-Benefit Analysis is
Determine on-going staffing costs – an analysis of the operating costs (actual versus proposed).Estimated savings and expenses by user department areas (e.g., Manufacturing, Marketing, etc.).Itemized benefits – both tangible and intangible.Hence, Improved efficiency - manufacturing expenses - fuel to reach orbit = net benefit best describes a cost-benefit analysis the team might perform.
To learn more about Solar power here
https://brainly.com/question/23810774
#SPJ2
You carry a fire hose up a ladder to a height of 10 m above ground level and aim the nozzle at a burning roof that is 9 m high. You hold the hose horizontally and notice that the water strikes the roof at a horizontal distance of 7 m from where it exits the nozzle. The hose is connected to a large pressurized chamber in the fire truck 0.5 m above ground level. What is the pressure in the chamber
Answer:
The value is [tex]P_1 = 314645 \ Pa [/tex]
Explanation:
From the question we are told that
The height is [tex]h_2 = 10 m[/tex]
The height of the burning roof is [tex]k = 9 m[/tex]
The horizontal distance is [tex]d = 7 \ m[/tex]
The height of the truck is [tex]h_1 = 0.5 \ m[/tex]
Generally the time for the water to hit the roof from the hose is mathematically represented as
[tex]t = \sqrt{\frac{2 * (h_2 - k)}{g} }[/tex]
=> [tex]t = \sqrt{\frac{2 * (10 - 9)}{9.8} }[/tex]
=> [tex]t = 0.4518 \ s [/tex]
Generally the velocity of the water is mathematically evaluated as
[tex]v_2 = \frac{d}{t}[/tex]
[tex]v_2 = \frac{ 7}{0.4518}[/tex]
[tex]v_2 = 15.5 \ m/s [/tex]
Generally from Bernoulli's Equation we have that
[tex]P_1 + \frac{1}{2} v_1^2 * \rho + \rho *g *h_1 = P_2 + \frac{1}{2} v_2^2 * \rho + \rho *g *h_2[/tex]
Here [tex]P_1 [\tex] is pressure in the chamber which we are to calculate , [tex]P_2 [\tex] is the atmospheric pressure with value [tex]P_2 = 101325 \ Pa [\tex] , [tex]v_1 [\tex] is the velocity of the water before it starts flowing with value [tex]v_1 = 0 m/s [\tex] , [tex]\rho [\tex] is the density of water with value [tex]\rho = 1000 \ kg/m^3 [\tex]
So
[tex]P_1 + \frac{1}{2} 0^2 * 1000 + 1000 *9.81 *0.5 = 101325 + \frac{1}{2}* 15.5^2* 1000 + 1000 *9.81 *10[/tex]
[tex]P_1 = 314645 \ Pa [/tex]
If you blow across the open end of a soda bottle and produce a toneof 290 Hz, what will be the frequency of the next harmonic heard ifyou blow much harder? (Hz)
Answer:
f = 96.56 Hz
Explanation:
A soda bottle can be simulated by a system of a tube with one end open and the other closed. In this case at the closed end we have a node and at the open end a maximum, so the wavelength is
λ = 4L / n
where n = 1, 3, 5, ...
for our case the speed of sound is
v = λ f
we substitute
f / v = 4L / n
calculate
290 / (340 4) = L / n
0.213 = L / n
In the exercise the value of n is not indicated, but we can assume that it is the fundamental answer, therefore n = 1
L = 0.213 m
now we can calculate the frequency of the following resonance n = 3
f = 4L v / n
f = 4 0.213 340/3
f = 96.56 Hz
Find the average velocity (in m/s) of a cyclist that starts 150 meters north of town and is 1200 meters north of town after 30 minutes
Answer:
v = 0.58 m/s
Explanation:
The velocity of an object is given as the ratio of the total distance traveled by the object to the time interval taken for traveling. Hence, we use the following formula to find the average velocity of the cyclist:
v = s/t
where,
v = average velocity = ?
s = distance traveled = final position - initial position =1200 m - 150 m =1050 m
t = time interval = (30 min)(60 s/1 min) = 1800 s
Therefore,
v = 1050 m/1800 s
v = 0.58 m/s
10. An object accelerates 2.0 m/s2 when a force of 12.0 newtons is applied
to it. What is the mass of the object?|
Explanation:
F = ma
m = F/a
= 12N / 2m/s2
= 6kg
The mass of the object is 6kg.
What is Force?A force is defined as an effect that can change the motion of an object by which an object with mass can change its velocity, that is, accelerate. Force can also be described simply as a push or pull. A force has both magnitude and direction which makes it a vector quantity.
According to the Newton's second law of motion is F = ma, or force is equal to mass times acceleration.
Where, F= Force applied
m= mass of the object
a= acceleration
For above given information,
F= 12 N
Acceleration= [tex]2 m/s^2[/tex]
So, mass will be m=F/a
m= 12/2 = 6kg
Thus, the mass of the object is 6kg.
Learn more about Force, here:
https://brainly.com/question/13191643
#SPJ6
How does the mass of an object affect its motion through the air?
The motion of an object through the air does not affect by its mass. The rate of fall of objects does not depend upon the mass.
What are free fall and air resistance?Free fall is a motion of a body in which gravity is the only force acting upon it. An object moving upwards might not be considered to be falling. But if the object is under the effect of the force of gravity, it is said to be in free fall.
Free fall is a type of motion in which the force acting upon an object is only gravity. Objects are not encountering a significant force of air resistance as they are only falling under the sole influence of gravity. All objects under such conditions will fall with the same rate of acceleration, regardless of their masses.
As an object falls through the air, have gone through some degree of air resistance. Air resistance is the collisions of the object's leading surface with molecules present in the air. The two most common factors that have a direct effect on the amount of air resistance are the cross-sectional area of the object and the speed of the object.
Learn more about free-fall motion, here:
https://brainly.com/question/13297394
#SPJ2
A young child cannot understand
another person's perspective because he is
Answer:
egocentric
Explanation:
Mary throws a baseball straight upward. We can ignore air resistance.
Answer:
Acceleration Remains Constant and Velocity decreases.
Explanation:
Suppose the two carts have the same mass m. In the initial state, these two carts are moving toward each other with the same initial speed, vi, along a frictionless track (implying no net external forces acting on the two carts). These carts collide and the result is some final state. The three parts of this question are concerned with three different final states. A. Assume that the carts hit each other and stop (both carts are not moving). Draw a momentum chart for this situation: make a separate row for each cart. B) Assume that the carts bounce off each other so that the final state of the system has each cart moving oppositely to its initial motion but with the same speed. Draw a momentum chart for this situation. C) As in (B), assume that the carts bounce off each other with equal speeds and in opposite directions, but now assume that the final speeds are smaller than the initial speeds. Draw a momentum chart. D) For each case does the total momentum of the two cars change? How do the momentum charts tell you this? E) Is the total kinetic energy constant for all three cases? How do you know?
Answer:
in all three cases the total moment is zero
cases A and B the kinetic energy is conserved.
In case C the velocity decreases so the kinetic energy decreases
Explanation:
This is a momentum conservation exercise
p = mv
In order for the moment to be preserved, we must define a system formed by the two cars, so that the forces during coke have been internal.
Before crash
car 1 p₀₁ = m v₀
car 2 p₀₂ = - mv₀
pose us several situations, we analyze each one
A) After the crash the cars stop
[tex]p_{f}[/tex] = 0
p₀₁ m v₀
p₀₂ -m v₀
p_{f} 0
B) After the collision, each vehicle reverses its direction
p₀₁ m v₀
p₀₂ -m v₀
p_{f1} -m v₀
p_{f2} m v₀
C) In this case some of the kinetic energy is lost which is converted into internal energy, for example, deformation, heat, friction.
Consequently the speed of the cars is
v < v₀
p₀₁ m v₀
p₀₂ - m v₀
p_{f1} -m v
p_{f2} m v
D) in cases A and B the momentum is maintained, but in case C the total momentum is maintained, even when the speed of the cars decreases, this is pf_total = 0
In all cases the total impulse is zero
p₀ = p₀₁ + p₀₂ = m v₀ - mv₀
p₀_total = 0
in all three cases the total moment is zero
E) The total kinetic energy is the sum of the kinetic energy of each car
K_total = K₀₁ + K₀₂
K_total = ½ m v₀² + ½ m (-v₀)²
K_total = m v₀²
we see that because it is squared, the sign of the velocity does not matter, therefore in cases A and B the kinetic energy is conserved.
In case C the velocity decreases so the kinetic energy decreases
Kf_total < K₀_total
the missing energy is transformed into internal energy during sackcloth.
In the attachment we can see a vector diagram of the momentum in each case
Most automobiles have a coolant reservoir to catch radiator fluid that may overflow when the engine is hot. A radiator is made of copper and is filled to its 16.0-L capacity when at 10.0∘C. What volume of radiator fluid will overflow when the radiator and fluid reach their 95.0∘C operating temperature, given that the fluid’s volume coefficient of expansion is 600×10−6/∘C? Note that this coefficient is approximate, because most car radiators have operating temperatures of greater than 95.0∘C.
Answer:
ΔV = 0.816 L
Explanation:
The change in volume of the fluid upon heating is given by the following formula:
ΔV = βVΔT
where,
ΔV = Increase in Volume of Fluid = Volume of Overflow = ?
β = Coefficient of volumetric expansion of fluid = 600 x 10⁻⁶ °C⁻¹
ΔT = Change in Temperature = Final Temperature - Initial Temperature
ΔT = 95°C - 10°C = 85°C
Therefore,
ΔV = (600 x 10⁻⁶ °C⁻¹)(16 L)(85° C)
ΔV = 0.816 L
A motorcycle patrolman is monitoring traffic from behind a billboard along a stretch of road where the speed limit is 96.0 km/hr. He clocks a motorist at 107 km/hr and decides to give chase and award the driver a speeding ticket. By the time he gets onto the highway and up to his chase speed of 131 km/hr, he is 350 m behind the speeder. Determine the amount of time it takes the patrolman to catch the speeder.
Answer:
The time taken is [tex]t = 52.5 \ s [/tex]
Explanation:
From the question we are told that
The speed limit is [tex]v__{{l}}} = 96.0 \ km/hr = \frac{96 * 1000}{3600} = 26.7 \ m/s[/tex]
The velocity of the motorist is [tex]v_m = 107 \ km/hr = \frac{107 * 1000}{3600} = 29.72 \ m/s[/tex]
The chase speed of the motorcycle patrolman is [tex]v = 131 \ km/hr = \frac{131 *1000}{3600} = 36.39 \ m/s[/tex]
The relative distance between the motorcycle patrolman and the speeder is d= 350 m
Generally the relative speed between the the motorcycle patrolman and the speeder is mathematically represented as
[tex]v_r = v - v_m[/tex]
=> [tex]v_r = 36.39 - 29.72[/tex]
=> [tex]v_r = 6.67 \ m/s [/tex]
Generally the time taken is mathematically represented as
[tex]t = \frac{v_r}{d}[/tex]
=> [tex]t = \frac{350}{ 6.67}[/tex]
=> [tex]t = 52.5 \ s [/tex]
Two red blood cells each have a mass of 4.60×10−14 kg4.60×10−14 kg and carry a negative charge spread uniformly over their surfaces. The repulsion arising from the excess charge prevents the cells from clumping together. Once cell carries −2.00 pC−2.00 pC of charge and the other −2.90 pC−2.90 pC , and each cell can be modeled as a sphere 8.20 μm8.20 μm in diameter. What minimum relative speed vv would the red blood cells need when very far away from each other to get close enough to just touch? Ignore viscous drag from the surrounding liquid.
Answer:
v = 5.26 10² m / s
Explanation:
We can solve this exercise using the concepts of conservation of mechanical energy, because there is no friction
starting point. Red blood cells too far away
Em₀ = K = ½ m v²
final point. Red blood cells touching r = 8.20 10⁻⁶ m
Em_f = U = k q₁ q₂ / r₁₂
Em₀ = Em_f
½ m v² = k q₁ q₂ / r₁₂
v = √ (2 k q₁ q₂ / m r₁₂)
we calculate
v =√ (2 9 10⁹ 2 10⁻¹² 2.9 10⁻¹² / (4.60 10⁻¹⁴ 8.20 10⁻⁶))
v = √ (0.276775 10⁶)
v = 0.526 10³ m / s
v = 5.26 10² m / s
A reversible heat engine, operating in a cycle, withdraws thermal energy from a high-temperature reservoir (the temperature of which consequently decreases), performs work w, and rejects thermal energy into a low-temperature reservoir (the temperature of which consequently increases). The two reservoirs are, initially, at the temperatures T1 and T2 and have constant heat capacities C1 and C2, respectively. Calculate the final temperature of the system and the maximum amount of work which can be obtained from the engine.
Answer:
The final temperature is [tex]\left(T_1^{C_1}+T_2^{C_2}\right)^{\frac {1}{C_1+C_2}}[/tex]
and the maximum amount of workdone is [tex]C_1T_1 + C_2T_2-(C_1+C_2)\left(T_1^{C_1}+T_2^{C_2}\right)^{\frac {1}{C_1+C_2}}[/tex].
Explanation:
Assume that [tex]R_1[/tex] is the reservior having temperature [tex]T_1 K[/tex] and heat capicity [tex]C_1 \frac JK[/tex] and [tex]R_2[/tex] is the reservior having temperature [tex]T_2[/tex] and heat capicity [tex]C_2 \frac JK[/tex].
The work will be extracted till that both the reservior reach the thermal equilibrium. Let the final temperature of both the reservior is [tex]T_f[/tex].
Let total [tex]Q_1[/tex] heat is extracted by the heat engine from the reservior [tex]R_1[/tex] and its temperature decreases from [tex]T_1[/tex] to [tex]T_f[/tex] and [tex]Q_2[/tex] heat is rejected by the heat engine to the reservior [tex]R_2[/tex] and its temperature decreases from [tex]T_2[/tex] to [tex]T_f[/tex].
So, The maximum amount of work done,
[tex]w= Q_1 - Q_2\; \cdots (i)[/tex]
Now, as the heat engine is reversible, so change is entropy for the universe is 0, which means sum of change in entropy for the ststem as well as surrounding is 0.
As shown in figure, the system is the reversible engine, so, change is entropy for the system is 0. Hence, change in entropy for the the surrounding is 0.
As temperature of [tex]R_1[/tex] is changing fron [tex]T_1[/tex] to [tex]T_f[/tex], so, change in entropy of surrounding due to transfer of [tex]Q_1[/tex] is [tex]C_1 \ln \frac {T_f}{T_1}[/tex].
Similarly, change in entropy of surrounding due to transfer of [tex]Q_2[/tex] is [tex]C_2 \ln \frac {T_f}{T_2}[/tex].
As the net change in entropy of the surrounding is 0.
[tex]\Rightarrow C_1 \ln \frac {T_f}{T_1}+C_2 \ln \frac {T_f}{T_2}=0[/tex]
[tex]\Rightarrow \ln \left( \frac {T_f}{T_1} \right)^{C_1}+ \ln \left( \frac {T_f}{T_2}\right)^{C_2}=0[/tex]
[tex]\Rightarrow \ln \left(\frac {T_f}{T_1}\right)^{C_1}=- \ln \left( \frac {T_f}{T_2}\right)^{C_2}[/tex]
[tex]\Rightarrow \ln \left(\frac {T_f}{T_1}\right)^{C_1}= \ln \left( \frac {T_2}{T_f}\right)^{C_2}[/tex]
[tex]\Rightarrow \left( \frac {T_f}{T_1}\right)^{C_1}=\left( \frac {T_2}{T_f}\right)^{C_2}[/tex][taking anti-log both the sides]
[tex]\Rightarrow T_f^{(C_1 +C_2)}=T_1^{C_1}+T_2^{C_2}[/tex]
[tex]\Rightarrow T_f=\left(T_1^{C_1}+T_2^{C_2}\right)^{\frac {1}{C_1+C_2}}\; \cdots (ii)[/tex]
This is the required final temperature.
Now, from equarion (i), the maximum amount of work done is
[tex]w= Q_1 - Q_2[/tex]
As [tex]Q=C\Delta T[/tex]
[tex]\Rightarrow w=C_1(T_1-T_f)-C_2(T_f-T_2)[/tex]
[tex]\Rightarrow w=C_1T_1 + C_2T_2-(C_1+C_2)T_f[/tex]
From equation [tex](ii)[/tex],
[tex]w=C_1T_1 + C_2T_2-(C_1+C_2)\left(T_1^{C_1}+T_2^{C_2}\right)^{\frac {1}{C_1+C_2}}[/tex]
This is the required maximum workdone.
A cube at 333 K contains two metals: 8.00 kg of solid Silver and 15.0 kg of solid Gold. It is placed in contact with a block of solid Iron at 1737 K. The system reaches equilibrium at 1337 K (all the silver and all the gold has melted) Find the mass of the iron. (cgold-liquid= 0.150 kJ/(kg K), csilver-liquid= 0.280 kJ/(kg K)
Answer:
Mass of Iron is 24.45 kg
Explanation:
Given that:
Mass of Silver, [tex]m_{S}[/tex] = 8.00 kg
Mass of Gold, [tex]m_{G}[/tex] = 15.0 kg
Initial temperature of Silver and Gold = 333 K
Initial temperature of Iron = 1737 K
Final temperature = 1337 K
Specific heat capacity of Gold-liquid, [tex]c_{G}[/tex] = 0.150 kJ/(kg K)
Specific heat of Silver-liquid, [tex]c_{S}[/tex] = 0.280 kJ/(kg K)
Known: Specific heat capacity of Iron, [tex]c_{I}[/tex] = 0.461 kJ/(kg K)
Therefore;
Heat lost by Iron = Heat gained by Silver + Heat gained by Gold
[tex]m_{I}[/tex] x [tex]c_{I}[/tex] x Δθ = ([tex]m_{S}[/tex] x [tex]c_{S}[/tex] + [tex]m_{G}[/tex] x [tex]c_{G}[/tex]) x Δθ
[tex]m_{I}[/tex] x 0.461 x (1737 - 1337) = (8 x 0.280 + 15 x 0.150) x (1337 - 333)
[tex]m_{I}[/tex] x 0.461 x 400 = (2.24 + 2.25) x 1004
[tex]m_{I}[/tex] x 184.4 = 4507.96
[tex]m_{I}[/tex] = [tex]\frac{4507.96}{184.4}[/tex]
[tex]m_{I}[/tex] = 24.4466
[tex]m_{I}[/tex] ≅ 24.45
The mass of Iron is 24.45 kg.
If you hit a nail that has a mass of .003 kg with a force of 300 N, what will
the acceleration of the nail be?
Answer:
Explanation:
M= 0.003 kg
F=300N
a=?
F=mass*acceleration
a=F/m
a=300/0.003
a=100,000m/s^2
Two supports, made of the same material and initially of equal length, are 2.0 m apart. A stiff board with a length of 4.0 m and a mass of 10 kg is placed on the supports, with one support at the left end and the other at the midpoint. A block is placed on the board a distance of 0.50 m from left end. As a result the board is horizontal (that is, the downward force on each support is the same). The mass of the block is:
Answer:
20 kg
Explanation:
Assuming that the board remains horizontal with the unknown mass on it, then F = kx
If we add the vertical forces to zero, we have something like this
2F - (M + 10)g = 0
2F = (M + 10)g, next, divide both sides by 2
F = (M + 10)g/2
Since we were able to sum the moments at the right end of the board to zero, we then proceed to find the unknown mass M
To start, we say, Let the clockwise moment is positive, and so
F * 4 + F * 2 - Mg * 3.5 - 10 * g * 2 = 0
4F + 2F - 3.5Mg - 10 * 2 * g = 0
6F - 3.5Mg - 10 * 2 * g = 0,
Remember from above, we say that
F = M + 10)g/2, now, all we do is substitute it inside this equation
6 * (M + 10)g/2 - 3.5Mg - 10 * 2 * g = 0
3 * (M + 10)g - 3.5Mg - 10 * g * 2 = 0, divide all sides by g(so as to eliminate it)
3 (M + 10) - 3.5M - 10 * 2= 0
3M + 30 - 3.5M - 20 = 0
-0.5M + 10 = 0
0.5M = 10
M = 10/0.5
M = 20 kg
The mass of the block that was placed on the board is; M = 20 kg
Since the two supports are the same, then it means their forces will be the same.
Thus;
Force at left support = F
Force at right support = F
Now, we are told that a block of unknown mass is placed on the stiff board. This means that the sum of the weight of the board and and the block on it will be; (M + 10)g
where M is the mass of the block.
Now, from equilibrium we know that sum of upward forces is equal to sum of downward forces. Thus;
F + F = (M + 10)g
Thus;
2F = (M + 10)g
F = ¹/₂(M + 10)g
Now, taking moments about the right end gives;
(F × 4) + (F × 2) - (M × 3.5)g - (10 × 2)g = 0
6F - 3.5Mg - 20g = 0
Put ¹/₂(M + 10)g for F to get;
6(¹/₂(M + 10)g) - 3.5Mg - 20g = 0
Divide through by g to get;
3(M + 10) - 3.5M = 20
3M + 30 - 3.5M = 20
3.5M - 3M = 30 - 20
0.5M = 10
M = 10/0.5
M = 20 kg
Read more at; https://brainly.com/question/17059265
otential difference ΔVΔV exists between the inner and outer surfaces of the membrane of a cell. The inner surface is negative relative to the outer surface. If 2.70×10−20 J2.70×10−20 J of work is required to eject a positive sodium ion (Na+)(Na+) from the interior of the cell, what is the magnitude of the potential difference (in millivolts) between the inner and outer surfaces of the cell?
Answer:
The value is [tex]V =168.75\ millivolt [/tex]
Explanation:
From the question we are told that
The workdone is [tex]W= 2.70 * 10^{-20 } \ J[/tex]
Generally charge on the positive sodium ion is equivalent to the charge on a proton, the value is [tex]e = 1.60 *10^{-19} \ C[/tex]
Generally the potential difference between the inner and outer surfaces of the cell is mathematically represented as
[tex]V = \frac{W}{e}[/tex]
=> [tex]V = \frac{2.70 * 10^{-20 } }{1.60 *10^{-19} }[/tex]
=> [tex]V = 0.16875 \ V[/tex]
converting to millivolt
[tex]V = 0.16875 * 1000 [/tex]
=> [tex]V =168.75\ millivolt [/tex]
A powerful missile reaches a speed of 5 kilometers per second in 10 seconds after its launch. What is the average acceleration of the missile during this period?
A.
0.2 meters/second2
B.
0.4 centimeters/second2
C.
0.5 meters/second2
D.
0.5 kilometers/second2
Answer:
D
Explanation:
5 Km=5000m
so Δv=5000 m/sec
a=Δv/Δt
=5000/10
a=500 m/sec² as 500÷1000=0.5 Km
a=0.5 km/sec²
so D is the right answer.
Fill in the blank
A pot of water is placed on the cook top. For a while the temperature of the water increases,
indicating the____
is increasing.
Answer:
temperature
Explanation:
when you put a water on the stove the water will start to boil there for temperature
0.00032 cm is equal to
the answer is c because you have to move the decimal back because of the negative
The mass of the Sun is 2multiply1030 kg, and the mass of the Earth is 6multiply1024 kg. The distance from the Sun to the Earth is 1.5multiply1011 m. (a) Calculate the magnitude of the gravitational force exerted by the Sun on the Earth. N (b) Calculate the magnitude of the gravitational force exerted by the Earth on the Sun.
Answer:
a) 3.56 x 10^22 N
b) 3.56 x 10^22 N
Explanation:
Mass of the sun M = 2 x 10^30 kg
mass of the Earth m = 6 x 10^24 kg
Distance between the sun and the Earth R = 1.5 x 10^11 m
From Newton's law,
F = [tex]\frac{GMm}{R^2}[/tex]
where F is the gravitational force between the sun and the Earth
G is the gravitational constant = 6.67 × 10^-11 m^3 kg^-1 s^-2
m is the mass of the Earth
M is the mass of the sun
R is the distance between the sun and the Earth.
Substituting values, we have
F = [tex]\frac{6.67*10^{-11}*2*10^{30}*6*10^{24}}{(1.5*10^{11})^2}[/tex] = 3.56 x 10^22 N
A) The force exerted by the sun on the Earth is equal to the force exerted by the Earth on the Sun also, and the force is equal to 3.56 x 10^22 N
b) The force exerted by the Earth on the Sun = 3.56 x 10^22 N
Part A:
The magnitude of the gravitational force exerted by the Sun on the Earth is :
Mass of the sun M = 2 x 10^30 kgMass of the Earth m = 6 x 10^24 kgDistance between the sun and the Earth R = 1.5 x 10^11 mFrom Newton's law,
F = GmM/F
G is the gravitational constant = 6.67 × 10^-11 m^3 kg^-1 s^-2m is the mass of the EarthM is the mass of the sunR is the distance between the sun and the Earth.Substituting values,
F = = 3.56 x 10^22 N
The force exerted by the sun on the Earth is equal to the force exerted by the Earth on the Sun also, and the force is equal to 3.56 x 10^22 N.
Part B:
The force exerted by the Earth on the Sun = 3.56 x 10^22 N.
Learn more :
https://brainly.com/question/15541263?referrer=searchResults
A runner has an original velocity of 6 m/s and slows to a final velocity of 0 m/s. If the runner covers a
displacement of 12 m while slowing down, how long time) did it take the runner to stop?
Answer:
4 s
Explanation:
Given:
Δx = 12 m
v₀ = 6 m/s
v = 0 m/s
Find: t
Δx = ½ (v + v₀) t
12 m = ½ (0 m/s + 6 m/s) t
t = 4 s
What is the effect on the gas’ pressure when compressing a gas to 1/3 of its volume? Explain
Explanation:
It's pressure become three times larger because according to Boyles Law the pressure of fixed mass of gas is inversely proportional to it's volume provided that temp remains constant. That means a reduction in volume, will result in an increase in pressure and vice versa.
It's important to match your exercise shoes with the type of exercise in which you will be participating, Please select the best answer from the choices provided OT
Answer:
the answer is true
Explanation:
Pea plants have 2 advantages as genetic specimens:
Answer:
it can be cross pollinated as well as self pollinated
it has short life style
pea plant has many contrasting character in pair example tall, short.
large number of offspring are produced from hybrid plants
20-ohm resistor is connected to a 10 V battery. The battery is then replaced by a battery that provides a larger voltage what happens to the current through the resistor
Explanation:
It is given that,
Resistance, R = 20 ohms
Voltage of the battery, V = 10 V
We can find current flowing through the circuit using Ohm's law as follows :
V = IR
[tex]I=\dfrac{V}{R}\\\\I=\dfrac{10}{20}\\\\I=0.5\ A[/tex]
It can be seen from the Ohm's law, that the current is directly proportional to the voltage. It means that if the battery is replaced by a battery that provides a larger voltage, the current through the circuit will be more than 0.5 A i.e. it increases.
The current via the circuit will be more than 0.5 A i.e. it increases.
Ohm law:Since
Resistance, R = 20 ohms
The voltage of the battery, V = 10 V
Now we applied the above law i.e.
V = IR
I = V/R
I = 10/20
I = 0.5 A
Based on the above calculations, we can say that the current should be directly proportional to the voltage. That means in the case when the battery should be replaced by the battery that gives the larger voltage so the current should be more than 0.5 A due to this it increased.
Learn more about voltage here: https://brainly.com/question/15156298
A train that is 268.7 m long undergoes constant acceleration the moment the last car (end of
the train) is outside of the station, how far is the front of the train from the station after 25.0 s
if its initial speed before acceleration is 4.48 m/s and its final speed is 27.4 meters per second?
Answer:
its 667m just took the test
Explanation:
It is often illustrated in art, popular culture and everyday conversation that the Sun is Yellow. a. Using Wien’s Law and what you learned in class about the Sun’s temperature, explain why this is not true in reality. (20 points) b. In reality, what is the Sun’s true color? Why is this true? (20 points)
Answer:
a) surface λ = 5 10⁻⁷ m
nuecleus λ= 2,890 10⁻⁹ m
there is a mixture of wavelengths giving rise to white light
b) True color sun is White
Explanation:
Wien's law establishes a relationship between the temperature of a star and the maximum wavelength emitted
λ T = 2,898 10⁻³
if we calculate the wavelength of the Sun
T = 5800K λ = 5 10⁻⁷ m = 5000 nm
this is the surface temperature
in the part of the internal Sunspart (Nucleus) about 10⁶ degrees this is where the nuclear reaction occurs
in this region the photons are very short λ
λ = 2,890 10⁻³ / 106
λ= 2,890 10⁻⁹ m
these photons are absorbed and emitted on their way to the surface of the sun many times, therefore there is a mixture of wavelengths giving rise to white light
b) Sunlight when it reaches Earth is absorbed by atmospheric gases, mainly Blue, as it is absorbed by Nitrogen, it lets through mainly red and red
True color sun is White
