there was once a crab name mr crabs who had to go to the docter one day . mr crabs is a an animal in the ____ phylum which was not surpising since he has 10 jointed legs

The fundamental frequency of a 0.672-m-long tube, open at both ends, on a day when the speed of sound is 344 m/s is 256 Hz.

The fundamental frequency is the lowest frequency that any given instrument can produce. The instrument's first harmonic is another name for the fundamental frequency.

Given,

Length of the tube = 0.672-m

Speed of sound = 344 m/s

Tube open at both the ends

Solution:

Since the tube is open at both ends,

[tex]f_{n}[/tex] = n ([tex]V_{w/2L}[/tex])

n = 1, 2, 3, 4,...

[tex]f_{1}[/tex] = 1(344/2*0.672)

   = 256 Hz

To learn more about fundamental frequency, refer

https://brainly.com/question/1967686

#SPJ4

Answer:

A metamorphic rock

Explanation:

Increase in wavelength of light leads to decrease in the radiation energy.

Radiation energy is inversely proportional to the wavelength of light. Thus, an increase in the wavelength of light will decrease the radiation energy and a decrease in the wavelength of light will increase the radiation energy.

Radiation energy is calculated by the formula:

E = hυ

where,

E is the radiation energy

h is the Planck’s constant

υ is the frequency

But,

υ = c / λ

where,

c is the speed light travels at in vacuum

λ is the wavelength of light

Therefore,

E = hc/λ

And thus, radiation energy and wavelength of light are inversely proportional.

Learn more about radiation energy here:

https://brainly.com/question/1599867

#SPJ9

Increasing the frequency of supply will decrease the current through the inductor.

When an inductor is connected to an ac supply, it develops a resistance known as inductive reactance.

The inductive resistance/reactance(XL) is given by the following formula

XL = ω X L

As  ω =2πf

XL = 2πf x L

Where ω is the angular frequency and f is the frequency of the AC supply.

When the frequency of AC supply is increased i.e, f is increased, the inductive reactance (XL) is also increased because it is directly proportional to the frequency.

As the resistance of the inductor is increased, the current through it will decrease.

Thus, increasing the frequency of supply will decrease the current through the inductor.

To know more about "inductive reactance", refer to the following link:

https://brainly.com/question/20471259?referrer=searchResults

#SPJ4

Answer:

1what is the first who derived car

The rocket is still moving at 30 Km/s after 60 seconds

Speed is the distance travelled per unit. Mathematically, it can be expressed as:

Speed = distance / time

The follwing data were obtained from the question:

From the data given, we were told that the rocket experience no forces.

This simply implies that the rocket was still moving at the said speed (i.e 30 Km/s)

Thus, we can conclude that the speed of the rocket after 60 seconds is 30 Km/s since it experience no forces.

Learn more about speed:

https://brainly.com/question/680492

#SPJ1

The speed of raindrops hitting your face when thy fall vertically at 3m/s while you’re running horizontally at 4 m/s is 5 m/sec.

Consider one drop of rain falling vertically. The velocity  of the rain and the velocity of the man both  are taken as vectors.

The result of the above statement is the vector is sum.

Let us consider two vectors : a and b.

Then a and b are added.

The magnitude of the sum is the root of the sum of squares of the individual vectors.

We know that

a = 3

b = 4

On substituting the given values in the above equation, we get as

Underroot of 3^2 + 4^2 we get 25.

Therefore the square root of 25 is 5

Therefore, it hit fast your face is 5 m/s.

To know more about vectors visit:

https://brainly.com/question/13322477

#SPJ9

The acceleration of the following given forces and masses are Mass = 50 kg, Force = 150N, Acceleration = 3m/s², Mass = 50 kg, Force = 200N, Acceleration = 4m/s², Mass = 50 kg, Force = 250N, Acceleration = 5m/s², Mass = 50 kg, Force = 300N, Acceleration = 6m/s².

According to Newton's second law of motion, the rate of change of momentum is directly proportional to the force.

F = ma                                ----(1)

where,

m is the mass of the body

a is the acceleration by which body move

F is the force

From 1 equation,

a = F/ m

By substituting all the values, we get

For (1),

a = 150/ 50

a = 3m/s²

For (2),

a = 200/50

a = 4 m/s²

For (3),

a = 250/50

a = 5m/s²

For (4),

a = 300/50

a = 6 m/s²

Thus, we concluded that the acceleration of the following given forces and masses are

Mass = 50 kg, Force = 150N, Acceleration = 3m/s²

Mass = 50 kg, Force = 200N, Acceleration = 4m/s²

Mass = 50 kg, Force = 250N, Acceleration = 5m/s²

Mass = 50 kg, Force = 300N, Acceleration = 6m/s²

learn more about Newton's law of equation of motion:

https://brainly.com/question/8898885

#SPJ9

Answer:

If the gas is ideal while volume and temperature stay unchanged, there would be a five-fold increase in the pressure of this gas.

Explanation:

Let [tex]V[/tex] denote the volume of this gas, let [tex]P[/tex] denote the pressure of the gas, let [tex]n[/tex] denote the number of particles in this gas, let [tex]T[/tex] denote the temperature of this gas, and let [tex]R[/tex] denote the ideal gas constant.

If this gas is an ideal gas, it would satisfy the ideal gas law:
[tex]P\, V = n\, R\, T[/tex].

Assuming that this gas is uniform. The mass of this gas will be directly proportional to the number of particles [tex]n[/tex] in this gas. Hence, a five-fold increase in the mass of this will increase the number of particles in this gas by five folds.

Rearrange this equation to separate pressure [tex]P[/tex] from the number of particles in this gas [tex]n[/tex]:

[tex]\begin{aligned} P &= \left(\frac{R\, T}{V}\right) \, n\end{aligned}[/tex].

In other words, if the temperature and volume of this gas stays the same, the pressure [tex]P[/tex] of this gas will be proportional to the number of particles [tex]n[/tex] in this gas. Thus, the five-fold increase in the number of particles (from a five-fold increase in mass) will increase the pressure of this gas by five folds.

The power does the razor consume as it is ruined 160 watt.

From joules law of heating, current flows through a resistor, converts a part of electric energy into heat energy.

The rate at which the power dissipated through a resistor is,

[tex]P = V^2/R[/tex]

Here,V is the applied voltage or voltage from source Ris the resistance of the resistor, Resistance of the device Ac razor)is,

[tex]R = V^2/P[/tex]

[tex]= (120)^2/ 40[/tex]

= 14400/40

= 360 ohm

NOW, the input voltage is change to V1, new power consumed by the razor is

[tex]P_1 = V_1^2/R[/tex]

[tex]= (240)^2/360[/tex]

= 57,600/360

=160 watt

Joule's law is the e rate at which heat is produced in a conductor is directly proportional to the square f the current provided is resistance is constant.

To know more about  joules law of heating visit: https://brainly.com/question/23866366

#SPJ4

The fact that voyager 1 continues to speed out of the solar system even though its rockets have no fuel is an example of Newton's first law of motion.                                                                                                                                                  

Newton's first law of motion states that "an object will continue to be in a state of rest, or will continue to move at constant speed, unless it is acted upon by a force". In other words, if an object is already moving, it won't slow down or speed up on its own, unless it collides with another object, or a force acts on it.

Voyager 1 was launched in 1977 in an attempt to study the outer solar system. While it was being launched, rockets were used in order to break free from the gravitational pull of the earth. After that, the rockets continued to propel voyager 1 away from the earth, until it eventually ran out of fuel.

Even though its rocket is out of fuel, the satellite will continue to speed out of the solar system. This is because, according to Newton's first law of motion, voyager 1 will still continue in uniform motion out to space, unless it collides with an asteroid, or it enters the gravitational field of another planet, but for now, it will just continue to move.

Learn more about Newton's first law of motion here:

https://brainly.com/question/26108169

#SPJ4

Answer: acting, lying, or being across : set crosswise. 2 : made at right angles to the long axis of the body a transverse section.

Explanation:

When using parallax, astronomers calculate distance from the sun and not earth to improve on the accuracy of their measurement, since parallax angle decreases as star distance increases.

Parallax enables astronomers to measure the distances of far away stars by using trigonometry.

As the distance of star increases, the parallax angle decreases, and great degree of accuracy is required for its measurement.

So taking a refence from the earth instead of the sun will impact the accuracy of their measurement.

Thus, when using parallax, astronomers calculate distance from the sun and not earth to improve on the accuracy of their measurement, since parallax angle decreases as star distance increases.

Learn more about parallax distance here: https://brainly.com/question/2128443

#SPJ1

The net force is zero due to the direction.

We need to know about force resultant to solve this problem. The force resultant is the total net force applied to the object according to the direction. It can be written as

R = F1 + F2 + ... + Fn

where R is force resultant (net force)

From the question above, we know that

F1 = F2 = F N

Because the direction is the same, the force will be minus each other.

R = F1 - F2

R = F - F

R = 0 N

Hence, the net force is 0 N

Find more on net force at: https://brainly.com/question/14361879

#SPJ4

The energy would be obtained if 44 g of carbon were irradiated is  5.8863 x 10^5 J.

Assume each carbon atom emits one photon. For each photon.

E=hc/lambda

Where h = Plank's constant

C = speed of light

E = (6.625×10^-34)×(3×10^8)/(7.45×10^-7)

E = 2.66819x10^-19 J

So the total energy emitted is

E = E1xn

E = (2.66819x10^-19)×(6.022x10^23)/ 1 mol of carbon atom

E = 5.8863 x 10^5 J

Black body radiation is a type of radiation in which a body is in thermodynamic equilibrium, emitted by a black body. It has a specific, continuous spectrum of wavelength. Photons are energy stored in bundles.

In above question,

Wavlength (lambda)=745nm = 7.45x10^-7m.

Mass of carbon = 44 gram

Assume each carbon atom emits one photon. For each photon.

E=hc/lambda

Where h = Plank's constant

C = speed of light

E = (6.625×10^-34)×(3×10^8)/(7.45×10^-7)

E = 2.66819x10^-19 J

So the total energy emitted is

E = E1xn

E = (2.66819x10^-19)×(6.022x10^23)/ 1 mol of carbon atom

E = 5.8863 x 10^5 J

Therefore, The energy would be obtained if 44 g of carbon were irradiated is  5.8863 x 10^5 J.

Learn more about black body radiation here:

https://brainly.com/question/13002333

#SPJ1

The density of wood is 118.095 gram/liter.

We need to know about the density to solve this problem. Density is a unit that measures how dense an object is. Density can be measured by dividing mass by volume. It can be written as

ρ = m / V

where ρ is density, m is mass and V is volume

From the question above, we know that

m = 62 grams

V = 0.525 liter

By substituting the following parameters, we can calculate the density

ρ = m / V

ρ = 62 / 0.525

ρ = 118.095 gram/liter

Hence, the density of wood is 118.095 gram/liter.

Find more on density at: https://brainly.com/question/406690

#SPJ4

Critical angle. Angle of refraction from. Diamond to hear is 90 degree.

Using Snell's law.

[tex]\frac{sini}{sin90} =\frac{1}{n} \\ or, n=2.42[/tex] index of refraction

Refraction is the term for the bending of light as it passes through transparent materials (it also occurs with sound, water, and other waves).

We are able to create lenses, magnifying glasses, prisms, and rainbows because to this bending caused by refraction. Even our eyes rely on this light bending. We wouldn't be able to concentrate light onto our retina without refraction.

Two factors determine how much bend occurs:

To know more about refraction visit:

https://brainly.com/question/14760207

#SPJ4

The heat developed per hour is 2896740 J/h.

The electric potential of the electric iron is V.

V = 121 v

The current drawn by the electric rod is I.

I = 6.65 A

The heat developed is,

Power = Electric potential × Current

P = V × I

= 121 × 6.65

= 804.65 watts

Heat developed developer in watts is 804.65 watts.

The heat developed in joules per second is,

= 804.65 J/s

The heat developed in joules per second is 804.65 Joules per second.

The heat developed per hour is,

[tex] = \frac{804.65}{ \frac{1}{3600}hour } [/tex]

= 2896740 J/h

Therefore, the heat developed per hour is 2896740 joules per hour.

To know more about the current, refer to the below link:

https://brainly.com/question/23323183

#SPJ4

The amplitude of the electric field in a plane electromagnetic wave is 100  v/m then the amplitude of the magnetic field is 3.34×[tex]10^{-7}[/tex].

Electromagnetic waves, or EM waves, are produced by the oscillations of an electric field and a magnetic field. In other words, electromagnetic (EM) waves are created when magnetic and electric fields oscillate.

Electromagnetic waves are produced when an electric field and a magnetic field interact. They are referred to as "electromagnetic" waves as a result. The electric field and magnetic field of an electromagnetic wave are perpendicular to one another (at right angles). They are also parallel to the direction of the EM wave.

According to the question,

Electric Field, E₀= 100 v/m and,

B₀/E₀=1/c

The amplitude of the magnetic field  will be :

B₀=E₀/c

=100/(3×[tex]10^{8}[/tex])

B₀=3.34×[tex]10^{-7}[/tex]

Hence, the amplitude of the magnetic field is 3.34×[tex]10^{-7}[/tex].

To get more information about Electromagnetic waves :

https://brainly.com/question/18165320?referrer=searchResults

#SPJ4

(a) The probability that we roll the die n times is (5/6) n−1 = (1/6)

(b) The expected number of times we roll the die is 6

We would have to roll (n – 1) numbers that are not 6 followed by a 6. In other words, other five numbers are expected to be rolled each, and since there are five other numbers aside 6, so the probability is

(5/6) n−1 = (1/6)

The expected number of dies to be rolled is given by the relation:

E(N) = ∑_(n=1)^∞▒n

= (5/6) n−1* (1/6)

= (1/6) (1/(1-(5/6)))2

= 6

This is the correct answer since after 6 rolls we would expect to have rolled exactly one 6 while other numbers appear once per time.

To learn more about probability. Click https://brainly.com/question/18723490

#SPJ4

When Diego is in the race, he would be using only aerobic exercise.

The term aerobic exercise has to do with the type of exercise that require brisk repetitive movements in which the consumption of oxygen is elevated during the process.

A person tends to breath faster and more deeply when carrying out an aerobic exercise and the rapid movements is the reason why there is an intense demand for oxygen in the process.

As such, when Diego is in the race, he would be using aerobic exercise.

Learn more about aerobic exercise:https://brainly.com/question/2428731

#SPJ1

An energy unit known as a kilowatt-hour is one kilowatt of power for one hour. It is 3.6 megajoules, or in conventional units.

The Formula for Calculating Watts Into Kilowatt-Hours:

kWh = (watts × hrs) ÷ 1,000

[tex]= ( 16*6)/1000[/tex]

=0.096 kwh

To learn more about kilowatt-hour refer to:

https://brainly.com/question/13988193

#SPJ4

If 4.71 l of nitrogen gas and 24.96 l of hydrogen gas were allowed to react, in total 16.616 L of ammonia could form.

The balanced reaction for this would be:

N2(g) + 3H2(g) → 2NH3(g)

assuming STP:

∴ V N2(g) = 4.71 L

∴ V H2(g) = 24.96 L

The ideal gas equation is stated as:

PV = RTn

∴ moles N2(g) = PV/RT

⇒ mol N2(g) = (1 atm) (4.71L)/ (0.082 atm.L/K.mol)(298 K)

⇒ mol N2(g) = 0.007 mol

∴ moles H2(g) = PV/RT

⇒ mol H2(g) = (1) (24.96) / (0.082) (298) = 1.021 mol (limit reagent)

∴ moles NH3(g) = (1.021 moles H2(g)) (2 moles NH3 / 3 mol H2) = 0.680 mol

∴ V NH3(g) = RTn/P

⇒ V NH3(g) = ((0.082 atm.L/K.mol)(298 K) (0.680 mol))/(1 atm)

⇒ V NH3(g) = 16.616 L

To know more about ideal gas, visit:

https://brainly.com/question/28257995

#SPJ4

Wavelength = c/f = (3 × [tex]10^{8}[/tex]) / (9076 × [tex]10^{9}[/tex]) = 0.0307 m.

The distance between identical points (adjacent crests) in adjacent cycles of a waveform signal propagated in space or along a wire is defined as the wavelength.

Therefore,

Wavelength = c/f = (3 × [tex]10^{8}[/tex]) / (9076 × [tex]10^{9}[/tex]) = 0.0307 m.

To learn more about Wavelength, visit;

https://brainly.com/question/4112024

#SPJ4

The transformer secondary turns should be 83 turns.

We need to know about the transformer to solve this problem. Transformer is a device that can increase or reduce the voltage. The changed voltage depends on the current and number of coil turns. It can be written as

Vi / Vs = Ni / Ns = Is / Ii

where Vi is input voltage, Vs is output voltage, Ni is primary turn, Ns is secondary turn, Is i output current and Ii is input current.

From the question above, we know that

Vi = 120 V

Ni = 1000 turns

Vs = 10V

By substituting the following parameters, we can calculate the secondary turns

Vi / Vs = Ni / Ns

120 / 10 = 1000 / Ns

Ns = 1000 / 12

Ns = 83 turns

Hence, the transformer secondary turns should be 83 turns.

Find more on transformer at: https://brainly.com/question/25886292

#SPJ4

The angle in radians between the central maximum  is 0.04 .

The central maximum is the brightest central portion of the diffraction pattern. The central maximum is the widest and has the maximum intensity.

When the crest of a wave coincides with the crest of another wave then that interference is called the bright fringe. The same thing happens with the dark fringe also, when the trough of one wave coincides with the trough of another wave then results in dark fringes.

Formula used:

nλ = d sin(θ)

Given,

n = 1, and d = 25λ, so:

λ = 25λsin(θ)

on Dividing through by λ, and we get:

1 = 25sin(θ)

1/25 = sin(θ)

θ = 2.29 degrees = 0.04 radians.

To know more about "Bright Fringe"

Refer this link:

https://brainly.com/question/14703580

#SPJ4

According to the  given statement  these option are apply for strong hypothesis:

B-A good hypothesis results in a test with quantifiable outcomes.

C-A good hypothesis leads to a test with measurable results.

E-A good hypothesis provides a possible explanation to answer a scientific question.

A few examples of simple hypotheses: "Students who eat breakfast will perform better on a math exam than students who do not eat breakfast." Complex hypothesis: "Students who experience test anxiety before an English exam will get lower scores than students who do not experience test anxiety."

Simple hypothesis is one example of a hypothesis. complex hypothesis direction-hypothesis

To know more about Hypothesis visit:

https://brainly.com/question/13025783

#SPJ9

Which statement describes the best reason for having a strong hypothesis ?  Check all that apply.

A-A good hypothesis is based on one's personal opinion.

B-A good hypothesis can be tested.

C-A good hypothesis results in a test with quantifiable outcomes.

D-A good hypothesis does not always have to be based on prior knowledge or research.

E-A good hypothesis provides a possible explanation to answer a scientific question.

The liquid density is 1.25 g/ml.

We need to know about the density to solve this problem. Density is a unit that measures how dense an object is. Density can be measured by dividing mass by volume. It can be written as

ρ = m / V

where ρ is density, m is mass and V is volume

From the question above, we know that

m = 10.47 lb

V = 1 gal

Convert mass to grams

m = 10.47 lb

m = 10.47 x 453.592 grams

m = 4749.11 grams

Convert volume to milliliters

V = 1 gal

V = 1 x 3785.41 ml

V = 3785.41 ml

By substituting mass and volume, we can determine the density

ρ = m / V

ρ = 4749.11 / 3785.41

ρ = 1.25 g/ml

Find more on density at: https://brainly.com/question/406690

#SPJ4

Answer: Ask the rest of the question.

Explanation: