in his atomic theory, dalton proposed that all atoms of a given element are identical. which of the following observations provides the best evidence that the proposal is incorrect?
In his atomic theory, Dalton postulated that every atom of a specific element is identical. Given that CuCu's mass spectrum has two peaks, one at 63 amu and the other at 65 amu, option b is correct.
A scientific theory addressing the composition of matter was put forth by English physicist and chemist John Dalton in 1808. It asserted that the fundamental units of matter are minute, indivisible particles known as "atoms." The number of protons in the nucleus of a pure substance, or chemical element, comprised exclusively of one species of atoms, is known. Chemical elements, as opposed to chemical compounds, cannot be reduced through any chemical process to less complicated molecules.
Learn more about chemical compounds here
https://brainly.com/question/12166462
#SPJ4
The complete question is -
a) The mass spectrum of CuCu has a peak at 123amu and another peak at 26amu.
b) The mass spectrum of CuCu has a peak at 63amu and another peak at 65amu.
c)The mass spectrum of CuCu has a peak at 89amu and another peak at 69amu.
Consider the previous question again. If 3 moles of MgCl2 are put in a Liter of water then which of the following statements is TRUE? (Mark all that are TRUE...there may be more than one).a. The solution would have a molarity of 1 b. The solution would have a molarity of 3 c. The solution would have an osmolarity of 3 d. The solution would have an osmolarity of 6 e. The solution would have a molarity of 6 f. The solution would have a molarity of 1.5 g. The solution would have an osmolarity of 1.5 h. The solution would have an osmolarity of 9
If 3 moles of MgCl₂ are put in the liter of the water then the true statement are :
d) True
e) True
f) True
g) True
h) True
The true statements are given below if the 3 moles of MgCl₂ are put in the liter of the water :
d) The solution would have an osmolarity of 6
e) The solution would have a molarity of 6
f) The solution would have a molarity of 1.5
g) The solution would have an osmolarity of 1.5
h) The solution would have an osmolarity of 9
The molarity can be calculated by the following formula :
Molarity = moles / volumes in L
To learn more about molarity here
https://brainly.com/question/16017559
#SPJ4
A positively charged sphere A is brought close without touching to a neutral sphere B. Sphere B is touched with a grounded wire. What is the charge on sphere B after the wire is removed?
The contact of the charged aluminum plate with the neutral metal spherical causes it to become charged.
What occurs when two spheres with different charges come into contact?Contact between a charged object and a neutral object constitutes charging by conduction. Consider touching a neutral metal sphere with an aluminum plate that is positively charged. The contact of the charged aluminum plate with the neutral metal spherical causes it to become charged.The positive charges on a positively charged conducting sphere will migrate in the direction of the uncharged conducting sphere when it is brought close to (but not touching) an uncharged conducting sphere (that is, one with no excess charge).The contact of the charged aluminum plate with the neutral metal spherical causes it to become charged.To learn more about spheres refer to:
https://brainly.com/question/22807400
#SPJ1
A mass is recorded as 15.02 g. Given the accepted level of uncertainty in any recorded measurement, select the range in which this mass will fall.O 15.01 - 15.03 gO 15.00 - 15.10 g O 14.92 - 15.12 g O 14.95 - 15.05 g
A mass is recorded as 15.02 g. Given the accepted level of uncertainty in any recorded measurement, The correct answer is 15.01 - 15.03 g.
The accepted level of uncertainty in any recorded measurement is typically given as the number of significant figures in the measurement. In this case, the mass is recorded as 15.02 g, which has three significant figures. This means that the true value of the mass could be anywhere within ±0.01 g of the recorded value. Therefore, the range in which this mass will fall is 15.01 - 15.03 g.
Option-15.00 - 15.10 g is not correct as it is greater than ±0.01 g
Option-14.92 - 15.12 g is not correct as it is greater than ±0.01 g
Option-14.95 - 15.05 g is not correct as it is not including the recorded value 15.02g
Learn more about uncertainty in any recorded measurement here:
https://brainly.com/question/15237560
#SPJ4
a chemist is trying to get two substances to react, but he is unsuccessful. he knows that the two substances should react with one another. which of the following could he do to possibly get the substances to react? (select all that apply)
It's possible that the substances will react to form the product when the substance is heated. The kinetic energy of a substance will increase when heated. Therefore, choice E is the right one.
What is a Chemical reaction?A chemical reaction is the process by which one or more reactants are changed into products, which are new substances. Depending on the reactants, the substances are either chemical elements or compounds.
Since an increase in temperature typically speeds up a reaction by raising the average kinetic energy of the reactant molecules in a solution, heating the solution will cause the formation of product. This will increase the frequency at which different substances in a solution collide, which will cause products to form.
Learn more about Chemical reaction here:
brainly.com/question/29762834
#SPJ4
Complete question:
A chemist is trying to get two substances to react, but he is unsuccessful. He knows that the two substances should react with one another. Which of the following could he do to possibly get the substances to react? (Select all that apply)
a
increase the concentration of one of the substances
b
crush up one of the substances
c
decrease the concentration of one of the substances
d
cool the substances
e
heat the substances
Give the name of the ion with 13 protons and 10 electrons
Answer:
Explanation:
aluminum
Answer: The aluminum ion
Explanation:
How many of the following molecules are polar?
CH4, N2, NBr3, PCl5, CH3Cl
The molecules that are polar among the given options are as follows:
NBr₃
CH₃Cl
What are polar molecules?Polar molecules are formed when one end of the molecule is said to possess more positive charges and whereas the opposite end of the molecule has negative charges, creating an electrical pole.
In polar molecules, the distribution of electrons between the covalently bonded atoms is not even.
The N–Br bond in NBr₃ is polar because the electrons that are shared between the two atoms are concentrated in the Br atom.
CH₃Cl is polar because the C-Cl bond is polar, the CH₃Cl has a net dipole, so CH₃Cl is polar.
PCl₅, CH₄, N₂ are said to be non polar because, as a bond is formed between the two atoms, there is no difference in their electronegativity and the net dipole moment becomes zero.
Learn more about polarity at: https://brainly.com/question/3184550
#SPJ1
The proposed rate-determining step for a reaction is2 NO2(g) → NO3(g)+NO(g)The graph above shows the distribution of energies for NO2(g) molecules at two temperatures. Based on the graph, which of the following statements best explains why the rates of disappearance of NO2(g) are different at temperature 2 and temperature 1 ?Pilihan jawabanNO2(g) is consumed at a faster rate at temperature 2 because more molecules possess energies at or above the minimum energy required for a collision to lead to a reaction compared to temperature 1.NO2(g) is consumed at a faster rate at temperature 2 because the molecules have a wider range of energies allowing for a better orientation during a collision compared to temperature 1.Fewer NO2(g) molecules have a relatively high energy at temperature 1, which favors collisions between molecules rather than between the molecules and the container, leading to a faster rate of disappearance compared to temperature 2.More NO2(g) molecules have a relatively low energy at temperature 1, which increases the number of effective collisions taking place and the rate of disappearance compared to temperature 2.
NO2(g) When compared to temperature 1, NO2(g) is burned at a quicker pace at temperature 2 because more molecules have energies at or above the minimum energy.
necessary for a collision to result in a reaction.A reaction's suggested rate-determining step is2NO2(g) + NO3(g) (g)The graph above depicts the energy distribution for NO2(g) molecules at two temperatures. According to the graph, NO2(g)NO2(g) is burned at a quicker rate at temperature 2 because more molecules have energies equal to or greater than the minimum energy necessary for a collision to result in a reaction at temperature 1. The first step in balancing a chemical equation is to identify your reactants and products. Remember, your reactants are on the left side of your equation. The products
learn more about molecules here:
https://brainly.com/question/19922822
#SPJ4
compare and contrast the electromagnetic spectra and the atomic emission spectra. please use proper grammar and mechanics.
The electromagnetic spectrum and the atomic emission spectra are both related to the study of light and its properties. When an atom absorbs energy, electrons move to a higher energy level, and when they return to a lower energy level, they release energy in the form of light.
The electromagnetic spectrum is a range of all types of electromagnetic radiation, including radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays. These types of radiation have different wavelengths, frequencies, and energy levels. The electromagnetic spectrum is a continuous spectrum, with no clear boundaries between the different types of radiation.On the other hand, atomic emission spectra refer to the light emitted by atoms when they are excited. The light emitted by atoms is always specific to the element and the energy level of the atom. . This light is specific to the element and the energy level of the atom, and it results in a line spectrum, which is made up of specific and discrete lines of different colors.In summary, the electromagnetic spectrum is a continuous range of all types of electromagnetic radiation, while atomic emission spectra refer to the specific light emitted by atoms when they are excited, resulting in a discrete line spectrum. The electromagnetic spectrum provides an overview of all types of radiation and their characteristics, while atomic emission spectra allow for the identification of specific elements by analyzing the light they emit.
To learn more about electromagnetic spectrum here:
https://brainly.com/question/23727978
#SPJ4
in the following images, a blue circle represents an atom of one type of element, and a red square represents an atom of a second type of element. determine which of them represent a pure substance, a homogenous mixture, and a heterogeneous mixture.
In the given images structure 1 represents pure element, structure 2 represents heterogenous and structure 3 represents homogenous structure, respectively.
A Pure element is a structure that is made up of only one kind of particle. Homogenous mixture is a mixture that contain same proportion of its components while heterogenous mixture is a mixture that contains unequal proportion of the component.
Given, blue circle represents an atom and red square represents an atom of second type of element.
In the structure given in 1st, half part of sphere contains blue atom and another half contain another type of atom(red). Thus, the structure is an example of pure element.
In the 2nd structure, Blue and Red elements are mixed together in an unequal amount in a sample. Thus, it is an example of heterogenous structure.
In 3rd structure, number of two type of atoms are same. Thus, it is an example of homogenous structure.
Therefore, the provided structure represents pure element, heterogenous structure, and homogenous structure, respectively.
Learn more about homogenous mixture here;
https://brainly.com/question/24898889
#SPJ12
HELP PLEASE w/ all questions
Answer:
Explanation: 4P+5O2-----2P2O5
How much will the temperature a 60 g sample of iron (specific heat = 0.214 cal/g/*C) change if 2000 calories are added to it?
Answer:
37.36 degrees Celsius
Explanation:
The temperature change of a substance can be calculated using the formula:
ΔT = Q / (m * Cp)
Where:
ΔT is the change in temperature (in degrees Celsius)
Q is the heat added or removed (in calories)
m is the mass of the substance (in grams)
Cp is the specific heat capacity of the substance (in calories per gram per degree Celsius)
For a 60g sample of iron with a specific heat of 0.214 cal/g*C and 2000 calories added to it, the temperature change would be:
ΔT = 2000 / (60 * 0.214) = 37.36 degrees Celsius
pure semiconductor materials are mixed with impurities to form p or n type materials. a p type material is .
P or N type materials are created by combining pure semiconductor materials with impurities. When an impurity is combined with three valence electrons to give the compound a net positive charge, a P type material is created.
the components, ingredients, or materials from which something is formed or may be made. (2): material that possesses distinguishing characteristics that allow for categorization. sticky substance Any substance used to create an object is referred to as a material. Different materials include clay, glass, paper, wax, air, water, and chalk. Matter is the basis of all materials. Metals, polymers, and ceramics are the three main categories of materials. Steel, fabric, and ceramics are a few examples of them. These classes often have quite distinct origins, traits, and uses. Undoubtedly, materials have a bigger role in our society than we know. Almost every aspect of our everyday lives—including communication, response, shelter, clothing, and food production—is impacted by materials.
learn more about materials here:
https://brainly.com/question/13376768
#SPJ4
Which of the following is often easily separated into its components by simple techniques suchas filtering or decanting?
a.heterogeneous mixture
b.compounds
c.homogeneous mixture
d.elements
e.solutions
Heterogeneous mixtures easily separated into its components by simple techniques suchas filtering or decanting.
What is meant by filtering ?
Employing specialized equipment, remove particles from liquids or gases or specific forms of light: To get rid of any pollutants, the water is filtered.The most typical illustration is brewing tea. Tea leaves and water are separated during tea preparation using a filter or sieve.The pores of the sieve will only let water through. The filtrate, in this case water, is the liquid that has been obtained following filtration.The technique of filtering involves forcing a liquid to flow through the pores of a substance known as a filter in order to separate suspended solid particles from a liquid. The filtrate is the liquid that has gone through the filter.To learn more about filtering refer to
https://brainly.com/question/23945157
#SPJ4
If 25.0 grams of water at 100°C are heated at a constant rate of 400.0 joules/minute, calculate the time needed
to vaporize the sample completely. SHOW WORK.
I need help please
If 25.0 grams of water at 100°C are heated at a constant rate of 400.0 joules/minute, 56425J needed to vaporize the sample completely.
What is vaporization?
The process of converting a substance from its liquid or solid state into its gaseous (vapor) state is known as vaporization. Boiling is the process of vaporizing a liquid when the environment permits the development of vapor bubbles inside the liquid. Sublimation is the direct transformation of a solid into a vapor.
What is grams?
The gram is a unit of mass in the International System of Units (SI) that is equal to one thousandth of a kilogram. It was originally known as the gramme. Gram. This pen cap weighs around one gram.
Amount of heat required to convert 25g of water at 100°
C to 25g of steam at 100°
C =25×2257J=56425J
Therefore, If 25.0 grams of water at 100°C are heated at a constant rate of 400.0 joules/minute, 56425J needed to vaporize the sample completely.
Learn more about vaporization from the given link.
https://brainly.com/question/486624
#SPJ1
based on the reading and your knowledge of environmental science, suggest a reason why nitrogen is typically present in the largest quantity in inorganic fertilizer.
One reason why nitrogen is typically present in the largest quantity in inorganic fertilizer is because it is an essential nutrient for plant growth.
What are fertilizers?
Fertilizer is a substance added to soil to provide plants with essential nutrients such as nitrogen, phosphorus, and potassium. The primary purpose of fertilizer is to increase crop yields and improve the overall health of plants. Fertilizers can be organic or inorganic.
Nitrogen is a key component of chlorophyll, the molecule in plants that allows them to absorb light and use it to photosynthesize. Without sufficient nitrogen, plants cannot produce enough chlorophyll and will not grow well. Nitrogen is also necessary for the production of amino acids, which are the building blocks of proteins, and for the synthesis of nucleic acids, which are necessary for cell growth and replication.
Another reason is that Nitrogen is abundant in the atmosphere, comprising 78% of it, and is relatively easy to convert to a form that can be used by plants. Nitrogen can be converted to ammonia, which is a common ingredient in inorganic fertilizers, through the Haber-Bosch process, which uses high temperatures and pressures to combine nitrogen and hydrogen.
Additionally, Nitrogen is relatively cheap and easy to produce, making it a cost-effective choice for fertilizer manufacturers.
In summary, Nitrogen is an essential element for plant growth, abundant and relatively easy to convert to a form that can be used by plants and cost-effective, that's why it is present in the largest quantity in inorganic fertilizers.
To learn more about fertilizers from the given link:
https://brainly.com/question/22283073
#SPJ4
calculate the percent by mass composition of c (carbon) in the compound ch4 (round your answer to 3 significant figures at the end.) g
The percent by mass composition of c (carbon) in the compound ch4 is 10%.
How much carbon is there in CH4 by mass?As an example, let's look at methane, or CH4. Methane's formula weight is [12.01 + (4 x 1.008)] = 16.04 (grams per cubic meter). Methane has a mass that is made up of (12.01/16.04) x 100 = 74.87% carbon and (4.032/16.04) x 100 = 25.13% hydrogen.
Sulfuric acid's percentage makeup of each element: Hydrogen% is equal to (2.016/98.07) x 100, or 2.0556%. Sulfur% = 32.06 98.07 100 = 32.69% Oxygen% = (63.996/98.07) 100 = 65.25%.
(1) CO = 80% CH, equals 20%; (2) CO = 90% CH4 = 10%.
Confirm that about 82.6% of C4H10's mass is made up of carbon. The molar masses of hydrogen and carbon on the periodic table are, respectively, 12.0 and 1.01.
To learn more about percent by mass refer to:
https://brainly.com/question/26150306
#SPJ4
which of the following types of reactions will reach dynamic equilibrium? multiple select question. weak bases in water gas-forming reactions in an open system weak acids in water reactions where the product is removed
Only reversible reactions may reach dynamic equilibrium, which happens when the rates of the forward and reverse processes are identical.
When a system is in a state of dynamic equilibrium, the reversible reaction that is occurring in it no longer changes the ratio of reactants to products, but there is still movement of substances between the reactants and products. Because reactants and products continue to alter even after equilibrium has been reached, chemical equilibrium is dynamic in nature. Dynamic equilibrium is a condition in which bodies are moving at a constant speed as opposed to static equilibrium, which is a state in which bodies are at rest (rectilinear motion). The total amount of pressures exerted on them in both situations is zero.
learn more about dynamic equilibrium here:
https://brainly.com/question/19386257
#SPJ4
Only reversible reactions may reach dynamic equilibrium, which happens when the rates of the forward and reverse processes are identical.
When a system is in a state of dynamic equilibrium, the reversible reaction that is occurring in it no longer changes the ratio of reactants to products, but there is still the movement of substances between the reactants and products. Because reactants and products continue to alter even after equilibrium has been reached, chemical equilibrium is dynamic in nature. Dynamic equilibrium is a condition in which bodies are moving at a constant speed as opposed to static equilibrium, which is a state in which bodies are at rest (rectilinear motion). The total amount of pressure exerted on them in both situations is zero.
learn more about dynamic equilibrium here:
brainly.com/question/19386257
#SPJ4
which is would be the empirical formula of a compound that has 4 moles of oxygen and 10 moles of nitrogen?
The empirical formula for a compound is 2N2O if it contains 4 moles of oxygen and 10 moles of nitrogen. A compound is a material that results from the chemical bonding of two or more elements.
The two types of bonding that hold the atoms of a molecule together most frequently are ionic and covalent. In chemistry, a substance's empirical formula is the simplest whole number ratio of the atoms that are present in it. The simple illustration of this concept is the empirical formula of sulphur monoxide, which is just NO.
Nitrogen = 10/14 = 0.71 M of nitrogen = 4/16 = 1/4 = 0.2 M of oxygen
Atomic mass is equal to 0.2/0.2 and 1
Atomic mass = 0.71/0.2 = 3.6, or around 4, and empirical formula = 2N2O.
Learn more about empirical formula here
https://brainly.com/question/14044066
#SPJ4
determine the chemical feed rate for the alum, the amount of alkalinity consumed by the reaction, and the amount of precipitate produced in mg/l and kg/day?
The amount of precipitate produced in mg/l and kg/day is 57.2753 kg.
What is precipitation?Precipitation is the process of changing a dissolved substance from a super-saturated solution to an insoluble solid in an aqueous solution.
Chemical feed rate :
60 mg per liter we need
60 grams per one m3
60 x 3800 grams = 228 kg per 3800 m³
Since the water flow per day is 3800 m³, alum consumption per day is 228 kg
Alkalinity: The alkalinity requirement for alum is 0.49 mole of alkalinity per one mole of alum. The precipitate formed: For one mole of alum, 2 moles of Al(OH)₃ will form.
So 621 g of alum reacts to form
2 x 78 g of Al(OH)₃ precipitate
228 x 1000g will form:
(228 x 1000 x 156)/621 = 57.2753 kg per day precipitate
Therefore, the amount of precipitate produced in mg/l and kg/day is 57.2753 kg.
To learn more about precipitate, refer to the link:
https://brainly.com/question/14690742
#SPJ1
The question is incomplete. Your most probably complete question is given below:
Natural water with a flow of 3800 m3/d is to be treated with an alum dose of 60 mg/L.
Balance the redox reaction occurring in acidic aqueous solution: BrO−3(aq)+N2H4(g)→Br−(aq)+N2(g)
The redox reaction occurring in acidic aqueous solution is BrO3(aq) + 6N2H4(g) → 3Br-(aq) + 3N2(g).
The redox reaction occurring in acidic aqueous solution is: BrO3(aq) + N2H4(g) → Br-(aq) + N2(g)
To balance this redox equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation. Additionally, we need to make sure that the charge is balanced on both sides of the equation.
The unbalanced equation looks like this:
BrO3(aq) + N2H4(g) → Br-(aq) + N2(g)
We can start by balancing the elements:
BrO3(aq) + N2H4(g) → Br-(aq) + N2(g)
Now we can balance the charge:
BrO3(aq) + N2H4(g) → Br-(aq) + N2(g)
Finally, we can check that the number of atoms of each element is the same on both sides of the equation.
The balanced equation is:
BrO3(aq) + 6N2H4(g) → 3Br-(aq) + 3N2(g)
The balanced equation shows that 6 molecules of N2H4 and 3 BrO3 are required to produce 3 Br- and 3 N2.
To know more about redox reaction please refer: https://brainly.com/question/13293425
#SPJ4
Krista is saving money to visit her relatives in Florida. It costs $1,250 for the plane ticket and $250 per night for the hotel. Using the function that represents the cost c based on the number of nights n Krista spends in Florida, how many nights can Krista stay in Florida if she saves $3,500?
Krista can stay 9 nights in Florida if she saves $3,500.
What is linear function?The graph of a linear function is a straight line. The following is the form of a linear function.
a + bx = y = f(x).
One independent variable and one dependent variable make up a linear function. x and y are the independent and dependent variables, respectively.
Given:
Krista is saving money to visit her relatives in Florida.
It costs $1,250 for the plane ticket and $250 per night for the hotel.
Using the function that represents the cost c based on the number of nights n Krista spends in Florida,
f(x) = 250x + 1250.
If f(x) = 3500,
250x + 1250 = 3500
250x = 2250
x = 9
Therefore, she can stay for 9 nights.
To learn more about the linear function;
brainly.com/question/20286983
#SPJ1
_BaCl2 + _K3N → _Ba3N2 + _KCl
How many moles of BaCl2 do you need to react with 5.3 moles of K3N?
a
12.5 mol
b
18.0 mol
c
3.53 mol
d
7.95 mol
According to the balanced chemical equation and stoichiometry, 7.95 moles of barium chloride will react with 5.3 moles of K₃N.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.
As per the chemical equation, 3 moles of barium chloride give 2 moles of potassium nitride , thus 5.3 moles of potassium nitride will give 3×5.3 /2=7.95 moles .
Thus , 7.95 moles of barium chloride will react with 5.3 moles of K₃N.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ1
Can anyone help me out here? I'm really struggling
Answer:
Explanation: Cl2 + 2NaBr ------ 2Nacl+Br2
3H2+N2--------2NH3
2Na+Br2-----2NaBr
Cucl2+H2S----cuS+2Hcl
2Hgo+Cl2-----2Hgcl+O2
C+2H2-----CH4
elect the incorrect statements(s).
1. Although ice, water and water vapour all look different and display different physical properties, they are
chemically the same.
2. During burning of a candle, both physical and chemical changes take place.
3. Both water and cooking oil are liquid but their chemical characteristics are different. They differ in odour
and inflammability.
4. It is the physical property of oil that makes it different from water.
(a) 1 and 2 (b) 2 and 3
(c) 1, 2 and 3 (d) Only 4
The incorrect statements are option (a) 1 and 2 :
1. Although ice, water and water vapor all look different and display different physical properties, they are chemically the same.
2. During burning of a candle, both physical and chemical changes take place.
What is physical properties?Although ice, water and water vapor all look different and display different physical properties, they are chemically the same. This statement is incorrect. Ice, water, and water vapor are all forms of water, but they are not chemically the same. They have different physical properties such as state, shape, and temperature.
Therefore, During burning of a candle, both physical and chemical changes take place. This statement is incorrect. Burning of a candle is a chemical change, where the wax is broken down into smaller molecules and is converted into carbon dioxide, water vapor and other gases.
Learn more about physical properties from
https://brainly.com/question/12330204
#SPJ1
Chemistry final
HELP!!!!HELPP please
1) Shown in the image attached
2) Shown in the image attached
3)
a) Copper II sulfate
b) Aluminum chloride
c) Barium nitride
d) Iron III oxide
e) Lithium fluoride
4) Shown in the image attached
What are isotopes?We know that isotopes are the atoms that have the same atomic number but note the same mass number. The models of the isotope Lithium -8 is shown in the image attached.
The orbital diagram shows the arrangement of the elements that are in the atom. The orbital diagrams of nitrogen is shown in the image attached.
Learn more about isotopes:https://brainly.com/question/11680817
#SPJ1
which of the following structures are meso compounds? b, d and e only a and e only d and e only b only
B and D parts are Meso compounds from the structures attached below.
Meso compounds need to contain two or more chiral centers and a symmetry plane that splits the molecule in half. We can only refer to a chemical as a meso compound if it can meet these two requirements.
Part-A-The questioned chemical lacks a plane of symmetry yet contains three chiral centers. It is not a meso compound as a result.
Part-B-In this instance, the molecules have a plane of symmetry and three chiral centers. It is a meso compound as a result.
Part-c-Three chiral centers are present in this chemical, however the symmetry plane is not present. It is not a meso compound as a result.
Part-D-Three chiral centers and one plane of symmetry may be found in this chemical. It is a meso compound as a result.
Part-E-The provided molecule is not a meso compound since it lacks a plane of symmetry.
Part-F-In this instance, a plane of symmetry exists, but there is only one chiral center. It is not a meso compound as a result.
complete question:attached below.
learn more about Meso compounds Refer:brainly.com/question/12973507
#SPJ4
The balanced equation for the decomposition of sodium bicarbonate is 2NaHCO3(s) ---> Na2CO3(s) +H2O(g) +CO2 (g),ΔH
=129.2.
Using the enthalpies of formation, calculate the enthalpy of formation of sodium bicarbonate.
Because of this, it is calculated that -1013 kJ/mol is required to produce NaHCO3 N a H C O 3 from its component elements.
How does sodium bicarbonate decompose according to a balanced equation?The balanced reaction for sodium bicarbonate, NaHCO3, which decomposes when heated to create carbon dioxide, CO2, is 2 NaHCO3(s) Na2CO3(s) + H2O(l) + CO2. Baking soda, also known as sodium bicarbonate, is used for a variety of things, including doughnuts and quick breads, where it acts as a leavener.Because of this, it is calculated that -1013 kJ/mol is required to produce NaHCO3 N a H C O 3 from its component elements.For baked items, we typically use sodium bicarbonate (NaHCO3) (N a H C O 3). Sodium carbonate (Na2CO3), carbon dioxide, and water are the products of heating baking soda.To learn more about sodium bicarbonate refer to:
https://brainly.com/question/20670487
#SPJ4
at low temperatures and high pressures ethen gas, c2h4, does not behave like an ideal gas. use chemical principles to explain why this is.
At low temperature and high pressure Ethane gas doesn't not behave like Ideal gas because of its larger molecular size.
Ideal gas is a theoretical gas composed of many randomly moving particles. Ideal gases are called as hypothetical gases which do not exist in nature. Gases exhibit ideal behavior at certain conditions. Ideal gases are assumed to have no interactions among the molecules. The volume of the gases is negligible with respect to the total volume. At low temperature and high pressures the molecules of a gas are very close at each other such that the volume of the gas molecules become significant. The interactions between the atoms become strong enough to affect their properties.
To learn more about Ideal gases please visit:
https://brainly.com/question/25290815
#SPJ4
DA chemistry lab requires students to
identify chemical compounds by using
various tests. Each student is given
samples of three different compounds,
labeled A, B, and C. Each student is also
given a list of seven possible compounds.
If a student does not perform the tests and
randomly chooses three from the list, what
is the probability that he guesses all three
correctly?
Answer:
The chance of guessing the first one is 1/9. Second is 1/8. Third is 1/7.
Total is 1/9 x 1/8 x 1/7 = 1/504
Explanation:
