Answer:
8.13 mLExplanation:
The required volume can be found by using the formula for Boyle's law
[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
From the question we have
[tex]V_2 = \frac{6.5 \times 1.25}{1} = 6.5 \times 1.25 \\ = 8.125[/tex]
We have the final answer as
8.13 mLHope this helps you
How can you include osmosis in animal cell
list atleast two examples of Arrhenius acids?
Answer:
HCl (hydrochloric acid) and H2SO4 (sulphuric acid)
I hope it helps.
How is the rate of a chymotrypsin-catalyzed reaction affected by using more enzyme in the reaction mixture
The rate of a chymotrypsin-catalyzed reaction will increase by using more
enzyme in the reaction mixture.
The rate of a chemical reaction and the enzyme concentration have a direct
relationship. As concentration increases, the rate of a chemical reaction
also increases and vice versa.
In this scenario, we were told more enzyme was used in the reaction mixture
which signifies an increase in the concentration and a corresponding
increase in the rate of reaction.
Read more on https://brainly.com/question/12330608
Which of the following is NOT a property of gases?
Which of the following is NOT a property of gases?
a. Constant shape
b. Fill their container
c. Have mass
d. Easily compressed
Answer:
a. Constant shape
Which is true of protons and neutrons?
1. They have approximately the same mass and the same charge.
2) They have approximately the same mass but different charge.
by The have different mass and different charge.
O sette
4) They have different mass but the same charge.
Answer:
[tex]\blue{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}[/tex]
[tex]\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}\red{\rule{40pt}{999999pt}}[/tex]
How many moles of KOH are in 21.0g of KOH?
Answer:
HowHow many moles of KOH are in 21.0g of KOH?
Answer:
0.374 moles
Explanation:
I have included the dimensional analysis below, and by MM I mean Molar Mass of the atom.
Hope this helps!
2. A solution NaF is add dropwise to a solution that is .0122 M in Ba . When the concentration of F exceeds ______M, BaF2 will precipitate. Neglect volume changes. BaF2 K
Explanation:
BaF2(s) <------> Ba2+(aq) + 2F-(aq)
Ksp BaF2 = 1.0 x 10^-6.
Ksp BaF2 = [Ba2+(aq)]×[F-(aq)]^2 at equilibrium
When Qsp >Ksp, BaF2 will precipitate
Qsp = [Ba2+(aq)]×[F-(aq)]^2
[Ba2+(aq)]×[F-(aq)]^2 > 1.0 x 10^-6.
0.0122 moldm-3 × [F-(aq)]^2 > 1.0 x 10^-6
[F-(aq)]^2 > 1×10^-6 / 0.0122 mol2dm-6
[F-(aq)]^2 > 81.96 × 10^-6 mol2dm-6
[F- (aq)] > 9.05 × 10^-3 moldm-3
So F- concentration should be more than 9.05 × 10^-3 moldm-3
The result of a division problem is the a ) divisor . b ) quotient . c ) factor . d ) remainder .
Answer:
The number by which we divide is called the divisor. The result obtained is called the quotient. The number left over is called the remainder.
Explanation:
Calculate the mass (in grams) of chlorine (Cl2) gas sample which occupies a 2.50 L container at a pressure of 1.22 atm and temperature of 27.8°C?
Answer:Nothing
Explanation:
The answer is nothing the tempatature isnt matched with the degrees this is false
Which of the following describes how air resistance affects the motion of a falling object?
Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Air resistance may change the direction of a falling object but does not affect its speed.
Air resistance may change the direction of a falling object but does not affect its speed.
Air resistance works with gravity to pull a falling object towards the Earth.
Air resistance works with gravity to pull a falling object towards the Earth.
Air resistance opposes the force of gravity and causes an object to reach terminal velocity.
Air resistance opposes the force of gravity and causes an object to reach terminal velocity.
Air resistance opposes the gravity in a falling object hence the object loses speed once it reaches terminal velocity.
According to the experiment of Galileo, in the absence of air resistance, all objects that are thrown down from the same height will hit the ground at he same time due to the effect of gravity.
We know that the air resistance makes the acceleration of object to become less than the acceleration due to gravity. So, air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Learn more: https://brainly.com/question/865531
Answer:
The answer is D - Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Ill explain why -, for example ,
When the paper is smooth, it exposes a large surface to the air beneath it which slows its descent. Once it is crumpled, the surface which comes in contact with the air is much smaller, allowing it to fall much faster. At first, you probably thought the book would touch the ground first since it is heavier However, once the piece of paper was crumpled, they hit the ground at the same time! Funny, since it is the same piece of paper and the book is still heavier. It all comes down to form. I hope this helped u with the test !!
2. Cells are the_____________ life units on this plane
Answer:
Cell are the smallest life units on this planet
Explanation:
why do you continuously gain exactly the amount of mass you consume with each meal
Answer:
It depends on how much the calories and fat there is in the meals and if you don't get enough physical activity of the same amount of food that you eat it can lead to weight gain
Explanation:
Which part of the cell controls many functions of the cell and stores DNA?
A) The nucleolus
B) Chromosomes
C) Lysosomes
D) Chromatin
Answer:
The Nucleus...
it perform many activities and stores DNA in a cell.
A 0.48-mole sample of helium gas occupies a volume of 11.7 L . What is the volume of 0.72 mol of helium gas under the same conditions
AnswerExplanation:I finsished d
Answer:
17.55L
Explanation:
0.48mol : 11.7
0.72mol : x
0.48x = 8.424
x = 17.55
i want help with these questions thanks !
Answer:
I will give you hints, as follows:
Explanation:
- two words: climate change
- methane smells funny
- the number of electric cars sold each year is increasing
- there´s a reason they´re call "renewable"
- GEOmetry, GEOlogy, GEOthermal
Hope this helps!
If such an ion is negatively charged and includes one or more oxygen atoms
Answer:
atom
Explanation:
The sodium atom has a single valence electron that it can easily lose. (If the sodium atom loses its valence electron, it achieves the stable electron configuration of neon.) The chlorine atom has seven valence electrons and can easily gain one electron.
Which is larger? 12 milligrams or 12 kilograms
Answer:
12 kilograms is larger.
Explanation:
Of the three units, the kilogram is the largest and the milligram is the smallest. The prefix “kilo” means a thousand and “milli” means one-thousandths. A gram is the basic unit of mass.
A 1.__________ is a choice among possible alternative actions. Like planning decision-making is a challenge and requires careful consideration for both types of decision namely 2.____________________________ and 3.______________________. For effective planning in today’s dynamic environments. Different techniques and tools must be used, such as 4._________________, 5.______________________________, 6.______________________________, 7.________________________, 8.__________________. All planning types, without exception, make use of forecasting. Business periodicals publish forecasts such as employment and unemployment rates, increase or decrease of interest rates, stock market data, GNP/GDP data and others. Forecasts used may either be 9._________________, or 10.__________________. Risk or 11._________________________ compel the decision maker to do estimates regarding the possible occurrence of certain outcomes that may affect his or her chosen solution to a problem. All managers and workers/employees in organizations make decision or make choices that affect their jobs and organization they work for, they make decision by going through the 12.__________________________ of the decision-making process suggested by Robbins and Coulter (2009). 13._________________ is a process which begins with problem identification and ends with the evaluation of implemented solutions. 14.________________________ It is change in an attribute, condition, factor, parameter or value that represents crossing a threshold and actuates or initiates a mechanism or reaction that may lead to a radically different state of affairs. 15.________________________ Ideal conditions in deciding problems; these are situations in which a manager can make precise decisions because the results of all alternatives are known.
plzz help me
Answer:1. Decission
2.Structured or programmed decision
3.Unstructured or non -programmed decisions
4.Forecasting
5.Contingency planning
6.Scenario planning
7.Bench marking
8.Participatory planning
9.quantitative
10.qualitative
11.Uncertainty conditions
12.eigt steps
13. Decision making
14.Trigger point
15.Certainty conditions
Explanation:
It's all about organization and management.
Explanation:
I hope it helps
Which of the following statements are true concerning product distribution in the halogenation of an alkane?
a. Halogenation of alkanes follows a chain mechanism.
b. The initiation process involves the formation of a halogen molecule.
c. Heat or UV light causes the weak halogen bond to break.
d. A radical is an intermediate with a single unpaired electron.
e. Halogenation of alkanes is a rearrangement reaction.
Halogens combine with alkanes to yield halogenoalkanes. It is a chain reaction.
Alkanes are a group of organic molecules whose functional group is the carbon - carbon single bond. The halogenation of alkanes refers to the process by which alkanes reacts with halogen molecules to yield halogenoalkanes.
The following are true statements regarding the halogenation of alkanes;
Halogenation of alkanes follows a chain mechanism.Heat or UV light causes the weak halogen bond to break.A radical is an intermediate with a single unpaired electron.Learn more: https://brainly.com/question/17638582
You are given 1.091 grams of a white powder and told that it is a mixture of potassium carbonate and sodium carbonate. You are asked to determine the percent composition by mass of the sample. You add some of the sample to 10.00 mL of 0.8903 M nitric acid until you reach the equivalence point. When you have added enough carbonate to completely react with the acid, you reweigh your sample and find that the mass is 0.573 g. Calculate the mass of the sample that reacted with the nitric acid. Calculate the moles of nitric acid that reacted with the sample.
The sample of white powder contains 47.1% K2CO3 and 0.39% Na2CO3.
Molar mass of sodium carbonate = 106 g/mol
Molar mass of potassium carbonate = 138 g/mol
Number of moles of HNO3 = 10/1000 L × 0.8903 M = 0.008903 moles
Mass of HNO3 = 0.008903 moles × 63 g/mol = 0.56 g
Mass of sample added = 1.091 g
Mass of sample left over = 0.573 g
Mass of sample reacted = 1.091 g - 0.573 g = 0.518 g
The reacted sample contains xg of Na2CO3 and (0.518 - x) g K2CO3.
Na2CO3 + 2HNO3 --> 2NaNO3 + CO2 + H2O
106g of Na2CO3 reacts with 126g of HNO3
x g of Na2CO3 reacts with (126 × x/106)g of HNO3
K2CO3 + 2HNO3 --> 2KNO3 + CO2 + H2O
138 g of K2CO3 reacts with 126 g of HNO3
(0.518 - x) g of K2CO3 reacts with [(0.518 - x) × 126/138] g
Total mass of HNO3 used;
1.19x + 0.47 + 0.91x = 0.56
2.1x + 0.47 = 0.56
2.1x = 0.56 - 0.47
2.1x = 0.09
x = 0.09/2.1
x = 0.0043 g
Mass of K2CO3 = (0.518 - x) g = 0.518 - 0.0043 = 0.5137 g
Mass percent of K2CO3 = 0.5137 g/ 1.091 g × 100/1 = 47.1%
Mass percent of Na2CO3 = 0.0043/1.091 g × 100/1 = 0.39%
Learn more: https://brainly.com/question/9743981
Consider the evaporation of water. The standard change in the free energy is positive with ΔG∘rxn=+8.59kJmol. One might expect this process to occur in the opposite direction, with water vapor condensing into liquid water. How can the evaporation be spontaneously under normal conditions?
Answer:
The partial pressure of water is much less than 1atm, so the free energy change for the process must be negative with ΔGrxn<0.
Explanation:
Water vapor will condense into liquid water when the water vapor is in its standard state, with a pressure of 1atm. Under normal circumstances, the partial pressure of water vapor is much less that 1atm. It is in a nonstandard state. The free energy change of this reaction has to be negative in order to make the reaction spontaneous.
The criteria of the spontaneous process are the change in the Gibbs free energy should be negative. Above the normal boiling point, the TΔS will be greater than ΔH and ΔG<0.
What is Gibbs's free energy?Gibbs free energy can be described as a state function therefore it doesn’t depend on the path. The change in free energy is equal to the change in enthalpy minus the product of entropy change and temperature of the system.
ΔG = ΔH - Δ (TS)
If the process is carried out at constant temperature, ΔT = 0:
ΔG = ΔH – TΔS
ΔG > 0 for the reaction is non-spontaneous, ΔG < 0 for the reaction is spontaneous, exergonic and ΔG = 0 for the reaction is at equilibrium.
Spontaneous can be described as a reaction that occurs by itself without any external action towards it. The non-spontaneous process needs constant external energy applied to continue and as the external action, the process will cease.
Learn more about Gibbs free energy, here:
https://brainly.com/question/9179942
#SPJ5
How many grams are 0.300 moles of glucose, C6H12O6?
Answer:
Explanation:
Firstly, let us calculate the molar mass of the glucose. To find the molar mass we need to add the masses of individual elements which constitute one glucose molecule.
Now, we know that
Molar mass of Carbon C=12gmol−1
Molar mass of Hydrogen H=1gmol−1
Molar mass of oxygen O=16gmol−1
Therefore, Molar Mass of glucose (C6H12O6) can be calculated as shown below
⇒ 6×12+12×1+6×16
⇒72+12+96⇒180gmol−1
Given mass of glucose = 300g
Now, we can calculate the number of moles in given mass of glucose, using the below formula,
Using the Formula numberofmoles=givenmassmolarmass we get
numberofmoles=300180 = 1.7 moles or 2 moles (approx.)
Hence the number of moles present in 300 g of glucose is 1.7 moles or 2 moles approximately.
Determine how many grams of Al(OH)3 will be required to neutralize 216 mL of 0.367 M HCl according to the reaction:
3HCl + Al(OH)3 > AlCl3 + 3H20
mol = conc × v
= 0.367 × 0.216
= 0.0792 mol HCl
3 mol HCl = 1 mol Al(OH)3
0.0792 mol HCl = x
x = 0.0792/3 × 1
= 0.0264 mol Al(OH)3
Al(OH)3 = 27 + 3(16 +1) = 78 g/mol
mass = mol x molar mass
= 0.0264 × 78
= 2.0592 g
I don't know if it's correct
Oil does not dissolve in water because
Answer:
Because oil have apolar molecules, while water have polar molecules
Suppose you have samples of three unknown solids. Explain how you could use their properties to
determine whether or not they are ionic solids.
Using melting and boiling temperature, hardness and electric current passing testing.
Ionic solidsIonic solids are materials that have a strong bond between their ions, thus producing well-defined shapes.
In addition, due to this strong attraction, the boiling and melting temperatures of these materials are very high, in addition to the resistance to breakage presented by them.
Finally, ionic solids are also excellent conductors of electricity.
So, their properties used to determine whether or not they are ionic solids are melting and boiling temperature, hardness and electric current passing testing.
Learn more about ionic solids: brainly.com/question/8236583
The distance between two adjacent peaks on a wave is called the wavelength. (2pts) a. The wavelength of ultraviolet light is 255nm. What is the wavelength in meters? b. The wavelength of a beam of red light is 683nm. What is its wavelength in angstroms?
Answer:
a.2.55e-7
b.6830
Explanation:
Which of the following has the greatest mass?
A) One mole of mercury
B) One mole of barium
C) One mole of gold
D) They all have the same mass
Answer:one mole of gold
the process of breaking food is to release energy is called _____
Answer:
The process by which food is broken down to release energy is called respiration
I hope it helps.
Answer:
Respiration
Explanation:
hope this helps.
Br2(l) + 2Nal(aq) — 12(s) + 2NaBr(aq)
Which elements are oxidized and reduced in the reaction?
(1 point)
O Sodium (Na) is oxidized, and bromine (Br) is reduced.
O Bromine (Br) is oxidized, and iodine (1) is reduced.
O Bromine (Br) is oxidized, and sodium (Na) is reduced.
Olodine (I) is oxidized, and bromine (Br) is reduced.
Iodine (I) is oxidized, and bromine (Br) is reduced. The correct option is the last option - lodine (I) is oxidized, and bromine (Br) is reduced.
To determine which elements are oxidized and reduced,
First, we will define the terms Oxidation and Reduction
Oxidation is simply defined as the loss of electrons. It can also be defined as increase in oxidation number.
Reduction is defined as the gain of electrons. It can also be defined as decrease in oxidation number.
The given chemical equation is
Br₂(l) + 2NaI(aq) → I₂(s) + 2NaBr(aq)
Oxidation number of Bromine decreased from 0 to -1.
Therefore, Bromine is reduced.
Oxidation number of Iodine increased from -1 to 0.
Therefore, Iodine is oxidized.
Oxidation number of sodium did not change.
Therefore, Sodium is neither oxidized nor reduced.
Hence, Iodine (I) is oxidized, and bromine (Br) is reduced. The correct option is the last option - lodine (I) is oxidized, and bromine (Br) is reduced.
Learn more here: https://brainly.com/question/12913997
For a process Arightwards harpoon over leftwards harpoonB, at 25 °C there is 10% of A at equilibrium while at 75 °C, there is 80% of A at equilibrium. Estimate enthalpy change of this reaction in kJ/mol
This question is describing the following chemical reaction at equilibrium:
[tex]A\rightleftharpoons B[/tex]
And provides the relative amounts of both A and B at 25 °C and 75 °C, this means the equilibrium expressions and equilibrium constants can be written as:
[tex]K_1=\frac{90\%}{10\%}=9\\\\K_2=\frac{20\%}{80\%} =0.25[/tex]
Thus, by recalling the Van't Hoff's equation, we can write:
[tex]ln(K_2/K_1)=-\frac{\Delta H}{R}(\frac{1}{T_2} -\frac{1}{T_1} )[/tex]
Hence, we solve for the enthalpy change as follows:
[tex]\Delta H=\frac{-R*ln(K_2/K_1)}{(\frac{1}{T_2} -\frac{1}{T_1} ) }[/tex]
Finally, we plug in the numbers to obtain:
[tex]\Delta H=\frac{-8.314\frac{J}{mol*K} *ln(0.25/9)}{[\frac{1}{(75+273.15)K} -\frac{1}{(25+273.15)K} ] } \\\\\\\Delta H=4,785.1\frac{J}{mol}[/tex]
Learn more:
https://brainly.com/question/10038290https://brainly.com/question/19671384