True or False If the mass of the object increases, then the potential energy of the object decreases.​

Answer:

23s

Explanation:

s=ut+1/2at^2

the distance (s) is 400, initial velocity (u) is 0, acceleration (a) is 1.5 therefore

400=0t+1/2(1.5)t^2

400/0.75=0.75t^2/0.75

t^2=√533.33

t=23s

I hope this helps and sorry if it's wrong

Answer:

hcbvdgsyyvjusvbxjxu usbsbhsi

Explanation:

ysggsghxuxgscsixigdvgsibxhdhshshjf

Answer:

1 ohm

Explanation:

First of all, the equivalent resistance for two resistors (r₁ and r₂) in parallel is given by:

1 / Eq = (1 / r₁) + (1 / r₂)

The equivalent resistance for resistance for two resistors (r₁ and r₂) in series is given by:

Eq = r₁ + r₂

Hence as we can see from the circuit diagram, 2Ω // 2Ω, and 2Ω // 2Ω, hence:

1/E₁ = 1/2 + 1/2

1/E₁ = 1

E₁ = 1Ω

1/E₂ = 1/2 + 1/2

1/E₂ = 1

E₂ = 1Ω

This then leads to E₁ being in series with E₂, hence the equivalent resistance (E₃) of E₁ and E₂ is:

E₃ = E₁ + E₂ = 1 + 1 = 2Ω

The equivalent resistance (Eq) across AB is the parallel combination of E₃ and the 2Ω resistor, therefore:

1/Eq = 1/E₃ + 1/2

1/Eq = 1/2 + 1/2

1/Eq = 1

Eq = 1Ω

Answer:

the distance from the cornea where a very distant object will be imaged is 23.35 mm

Explanation:

Given the data in the question;

For a spherical refracting surface;

[tex]n_i[/tex]/[tex]d_0[/tex] + [tex]n_t[/tex]/[tex]d_i[/tex] = ( [tex]n_t[/tex] - [tex]n_i[/tex] )/R

where [tex]n_i[/tex] is the index of refraction of the light of ray in the incident medium

[tex]d_0[/tex] is the object distance

[tex]n_t[/tex] is the index of refraction of light ray in the refracted medium

[tex]d_i[/tex] is the image distance

R is the radius of curvature

Now, let [tex]d_0[/tex] = ∞, such that;

[tex]n_i[/tex]/∞ + [tex]n_t[/tex]/[tex]d_i[/tex] = ( [tex]n_t[/tex] - [tex]n_i[/tex] )/R

0 + [tex]n_t[/tex]/[tex]d_i[/tex] = ( [tex]n_t[/tex] - [tex]n_i[/tex] )/R

we make [tex]d_i[/tex] subject of the formula

[tex]n_t[/tex]R = [tex]d_i[/tex]( [tex]n_t[/tex] - [tex]n_i[/tex] )

[tex]d_i[/tex] = ( [tex]n_t[/tex] × R ) / ( [tex]n_t[/tex] - [tex]n_i[/tex] )

given that; R = 6.50 mm, [tex]n_t[/tex] = 1.41, we know that [tex]n_i[/tex] = 1.00

so we substitute

[tex]d_i[/tex] = (1.41 × 6.50 mm ) / ( 1.41 - 1.00 )

[tex]d_i[/tex] = 9.165 / 0.41

[tex]d_i[/tex] = 23.35 mm

Therefore, the distance from the cornea where a very distant object will be imaged is 23.35 mm

Answer: Below is the complete question

A spherical piece of candy is suspended in flowing water. The candy has a density of 1950 kg/m3 and has a 1.0 cm diameter. The water velocity is 1.0 m/s, the water density is assumed to be 1000.0 kg/m3, and the water viscosity is 1.0x10-3 kg/m/s. The diffusion coefficient of the candy solute in water is 2.0x10-9 m2/s, and the solubility of the candy solute in water is 2.0 kg/m3. Calculate the mass transfer coefficient (m/s)

answer:

mass transfer coefficient = 9.56 * 10^-5 m/s

Explanation:

Candy density = 1950 kg/m^3

Candy diameter = 1 cm

Velocity of water = 1 m/s

water density = 1000 kg/m^3

Viscosity of water = 1 * 10^-3 kg/m/s

diffusion coefficient of candy in water = 2 * 10^-9 m^2/s

solubility of candy = 2 kg/m^3

Determine the mass transfer coefficient ( m/s )

( Sh) mass transfer coefficient ( flow across sphere ) = 2 + 0.6Re^1/2 * SC^1/3

where : Re = vdp / μ ,   Sh = KLd / Deff

attached below is the remaining solution .

mass transfer coefficient =  9.56 * 10^-5 m/s

Answer:

False

Explanation:

As technology advances and new evidence is found which either contradicts or supports accepted scientific principles, the principles are susceptible to change.

Answer:

b. He would become farsighted.

Explanation:

A  cataract is defined as a medical condition where a person eyes becomes partially opaque and the person is not bale to see properly.

This is mainly caused due to aging or any injury in the eyes tissue which make up the lens of the eye.

It is the clouding of the lens of the eyes or opacity of the eyes. When treating cataract, in some cases the lens of the eyes are needed to be  removed. This may lead to person becoming far sighted.

Therefore, the correct option is (b).

[tex]\:[/tex]

Hydroelectric power, also called hydropower is the electricity produced from generators driven by turbines that convert the potential energy of falling or fast-flowing water into mechanical energy.

Answer:

Hydroelectric power/hydropower -  electricity produced by a hydraulic source, specifically energy generated falling or flowing water

∑ F (horizontal) = (150 N) cos(60°) - 15 N = (20 kg) a

==>   a = ((150 N) cos(60°) - 15 N)/(20 kg) = 3 m/s²

To calculate the acceleration of the box, we need to consider the net force acting on it. So, the acceleration of the box is 3 m/s².

The net force is the vector sum of the applied force and the force of friction. First, let's find the horizontal and vertical components of the applied force:

Horizontal component of the applied force (F[tex]_{horizontal}[/tex]) = F[tex]_{applied}[/tex] × cos(θ)

F[tex]_{horizontal}[/tex] = 150 N × cos(60°)

F[tex]_{horizontal}[/tex] = 150 N × 0.5

F[tex]_{horizontal}[/tex] = 75 N

Vertical component of the applied force (F[tex]_{vertical}[/tex]) = F[tex]_{applied}[/tex] × sin(θ)

F[tex]_{vertical}[/tex] = 150 N × sin(60°)

F[tex]_{vertical}[/tex] = 150 N × (√3 / 2)

F[tex]_{vertical}[/tex] ≈ 129.9 N

Now, let's calculate the net force in the horizontal direction:

Net Force in the horizontal direction (F[tex]_{net horizontal}[/tex]) = F[tex]_{horizontal}[/tex] - F[tex]_{friction}[/tex]

F[tex]_{net horizontal}[/tex] = 75 N - 15 N

F[tex]_{net horizontal}[/tex] = 60 N

Now, we can calculate the acceleration (a) using Newton's second law of motion, F = ma:

F[tex]_{net horizontal}[/tex] = m × a

60 N = 20 kg × a

Now, solve for acceleration (a):

a = 60 N / 20 kg

a = 3 m/s²

So, the acceleration of the box is 3 m/s².

To know  more about acceleration

https://brainly.com/question/460763

#SPJ2

Answer:

şen çal kapimi turkish drama

Answer:

t = 3.48 s

Explanation:

The time for the maximum height can be calculated by taking the derivative of height function with respect to time and making it equal to zero:

[tex]h(t) = -16t^2+v_ot+h_o\\\\\frac{dh(t)}{dt}=0=-32t+v_o\\\\v_o = 32t[/tex]

where,

v₀ = initial speed = 110 ft/s

Therefore,

[tex]110 = 32t\\\\t = \frac{110}{32}\\\\[/tex]

t = 3.48 s

Explanation:

We can write Newton's 2nd law as applied to the sliding mass [tex]m_1[/tex] as

[tex]T - m_1g\sin38 = m_1a\:\:\:\:\:\:\:(1)[/tex]

For the hanging mass [tex]m_2,[/tex] we can write NSL as

[tex]T - m_2g = -m_2a\:\:\:\:\:\:\:(2)[/tex]

We need to solve for a first before we can solve the tension T. So combining Eqns(1) & (2), we get

[tex](m_1 + m_2)a = m_2g - m_1g\sin38[/tex]

or

[tex]a = \left(\dfrac{m_2 - m_1\sin38}{m_1 + m_2}\right)g[/tex]

[tex]\:\:\:\:= 0.30\:\text{m/s}^2[/tex]

Using this value for the acceleration on Eqn(2), we find that the tension T is

[tex]T = m_2(g - a) = (2.6\:\text{kg})(9.51\:\text{m/s}^2)[/tex]

[tex]\:\:\:\:=24.7\:\text{N}[/tex]

Answer:

g = 0.0114 m/s²

Explanation:

The value of acceleration due to gravity on the surface of the moon can be given by the following formula:

[tex]g = \frac{Gm}{r^2}[/tex]

where,

g = acceleration due to gravity on the surface of moon = ?

G = Universal Gravitational Constant = 6.67 x 10⁻¹¹ N.m²/kg²

m = mass of moon = 4.2 x 10¹⁶ kg

r = radius of moon = 1.57 x 10⁴ m

Therefore,

[tex]g= \frac{(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(4.2\ x\ 10^{16}\ kg)}{(1.57\ x\ 10^4\ m)^2}[/tex]

g = 0.0114 m/s²

Explanation:

Lasers produce a narrow beam of light in which all of the light waves have very similar wavelengths. The laser's light waves travel together with their peaks all lined up, or in phase. This is why laser beams are very narrow, very bright, and can be focused into a very tiny spot.

Answer:

B. moving faster than car B, but not necessarily accelerating

Explanation:

Velocity is the speed of something. So car A's velocity is greater than car B but does not mean car A is accelerating.

Answer:

53.8Joule

Explanation:

hope it is helpful

Answer:

approximate 153.1J

Explanation:

W= 1/2k(x^2) = 1/2x725x(0.650)^2 = 153.15625 (J)

Answer:

[tex]\boxed {\boxed {\sf 5.22 \ m}}[/tex]

Explanation:

Gravitational potential energy is the energy an object possesses due to its position. It is calculated using the following formula:

[tex]E_P=mgh[/tex]

Where m is the mass, g is the acceleration due to gravity, and h is the height.

The object has a mass of 8.72 kilograms. Assuming this occurs on Earth, the acceleration due to gravity is 9.8 meters per second squared. The object gains 446 Joules of potential energy.

Let's convert the units of Joules. This makes the process of canceling units simpler later on. 1 Joule is equal to 1 kilogram meter squared per second squared. The object gains 446 J, which is equal to 446 kg *m²/s².

Substitute the values into the formula.

[tex]446 \ kg*m^2/s^2 = 8.72 \ kg * 9.8 \ m/s^2 *h[/tex]

Multiply on the right side of the equation.

[tex]446 \ kg*m^2/s^2 = 85.456 kg*m/s^2 *h[/tex]

We are solving for the height, so we must isolate the variable h. It is being multiplied by 85.456 kg*m/s². The inverse operation of multiplication is division, so we divide both sides by this value.

[tex]\frac{ 446 \ kg*m^2/s^2}{85.456 kg*m/s^2} = \frac{85.456 kg*m/s^2 *h}{85.456 kg*m/s^2}[/tex]

[tex]\frac{ 446 \ kg*m^2/s^2}{85.456 kg*m/s^2} =h[/tex]

The units of kg*m/s² cancel, leaving meters as our unit.

[tex]\frac{ 446 }{85.456 } \ m =h[/tex]

[tex]5.2190601011 \ m =h[/tex]

The original measurements of mass and potential energy have 3 significant figures, so our answer must have the same.

For the number we calculated, that is the hundredths place. The 9 in the thousandths place to the right tells us to round the 1 up to a 2.

[tex]5.22 \ m \approx h[/tex]

The object was lifted to a height of approximately 5.22 meters.

Answer:

ΔT = 0.017 °C

Explanation:

According to the given condition, the change in internal energy of the block must be equal to 85% of its kinetic energy:

Change in Internal Energy = (0.85)(Kinetic Energy)

[tex]mC\Delta T = (0.85)\frac{1}{2}mv^2\\\\C\Delta T = (0.425)v^2\\\\\Delta T = \frac{0.425v^2}{C}[/tex]

where,

ΔT = increase in temperature = ?

v = speed of block = 4 m/s

C = specific heat capacity of copper = 389 J/kg.°C

Therefore,

[tex]\Delta T = \frac{(0.425)(4\ m/s)^2}{389}\\\\[/tex]

ΔT = 0.017 °C

Answer:

Here , mass of bucket ,m = 3.2 Kg

Now , let the tension in upper rope is T1

the tension in the middle rope is T2

a)

For lower bucket, balancing forces in vertical direction

T2 - mg = 0

T2 = mg

T2 = 3.2 *9.8

T2 = 31.36 N

tension in the middle rope is 31.36 N

For the upper bucket , balancing forces in vertical direction

T1 - T2 - mg = 0

T1 = T2 + 3.2 *9.8

T1 = 62.72 N

the tension in the upper rope is 62.72 N

B)

for a = 1.25 m/s^2

Using second law of motion ,for both the buckets

Fnet = ma

T1 - 2mg = 2m*a

T1 = 2*3.2*(9.8 +1.25)

T1 = 70.72 N

the tension in the upper rope is 70.7 N

Now , the lower bucket

Using second law of motion,

T2 - mg = ma

T2 = 3.2 * (9.8 + 1.25)

T2 = 35.36 N

the tension in the lower rope is 35.36 N

Answer:

sorry i didn't understand

Answer:The radioactive waste

Explanation:Fission is the splitting of a heavy unstable nucleus into two Lighter nuclei

Answer:

A. When moving towards a high pressure center the pressure values ​​increase in the equipment

B. This area is called high prison since the weight of the atmosphere on top is maximum

Explanation:

A) A high atmospheric pressure system is an area where the pressure is increasing the maximum value is close to 107 Kpa, the other side as low pressure can have small values ​​85.5 kPa.

When moving towards a high pressure center the pressure values ​​increase in the equipment

B) This area is called high prison since the weight of the atmosphere on top is maximum

in general they are areas of good weather

Answer:

B = 0.013(-j) T

Explanation:

Given that,

The speed of a proton, [tex]v=1.75\times 10^7\ m/s[/tex]

Acceleration experienced by the proton,[tex]a=2.25\times 10^3\ m/s[/tex]

We need to find the magnitude and the direction of the magnetic field. At equilibrium,

[tex]ma=qvB\\\\B=\dfrac{ma}{qv}\\\\B=\dfrac{1.67\times 10^{-27}\times 2.25\times 10^{13}}{1.6\times 10^{-19}\times 1.75\times 10^{7}}\\\\B=0.013\ T[/tex]

The velocity is in +z direction, force in +x direction, then the field must be in -y direction.

Explanation:

she is a woman, i dont understand why youre still using he/him after she comes out

Answer:

[tex]D_l=d[/tex]

Explanation:

From the question we are told that:

The Electric field of strength direction =Right

The Velocity of The First Electron=V_0

The Velocity of The Second Electron=V_0

Therefore

[tex]V_{e1}=V_{e2}[/tex]

Generally, the equation for the Horizontal Displacement of electron is mathematically given by

[tex]D=\frac{at^2}{2}[/tex]

Where

Acceleration is given as

[tex]a=\frac{V_o}{2d}[/tex]

And

Time

[tex]T=\frac{d}{v_0}[/tex]

Therefore horizontal displacement towards the left is

[tex]D_l=\frac{(\frac{V_o}{2d})(\frac{d}{v_0})^2}{2}[/tex]

[tex]D_l=d[/tex]

Answer:

x = 68.3 m

Explanation:

tan 32.8 = x / 106

Answer:

pendulum, quartz

Explanation:

The intensity of the electromagnetic wave in terms of the electric field is 0.00298 W/m² and the intensity of the electromagnetic wave in terms of the magnetic field is 1.193x10⁻⁶  W/m².

The intensity of the electromagnetic wave is related to the electric field as well as to the magnetic field.    

a) Intensity of the electromagnetic wave for the electromagnetic field.

The intensity of the electromagnetic wave (I) in terms of the electromagnetic field is given by:

[tex] I = \frac{E^{2}*c*\epsilon_{0}}{2} [/tex]   (1)

Where:

c: is the speed of light = 3.00*10⁸ m/s  

E: is the magnitude of the electric field = 1.5 V/m

ε₀: is the permittivity of free space = 8.85*10⁻¹² C²/Nm²

Hence, the intensity of the electromagnetic wave (eq 1) is:

[tex] I = \frac{(1.5 V/m)^{2}*3.00 \cdot 10^{8} m/s*8.85 \cdot 10^{-12} C^{2}/(N*m^{2})}{2} = 0.00298 W/m^{2} [/tex]                                                                                          

b) Intensity of the electromagnetic wave for the magnetic field

We can calculate the intensity of the electromagnetic wave (I) in terms of the magnetic field with the following equation:

[tex] I = \frac{cB^{2}}{2\mu_{0}} [/tex]   (2)

Where:

B: is the magnitude of the magnetic field = 10⁻¹⁰ T

μ₀: is the vacuum permeability = 4π*10⁻⁷ m*T/A

Therefore, the intensity of the electromagnetic wave (eq 2) is:

[tex] I = \frac{3.00 \cdot 10^{8} m/s*(1\cdot 10^{-10} m*T/A)^{2}}{2*4\pi \cdot 10^{-7} T/A} = 1.193 \cdot 10^{-6} W/m^{2} [/tex]

Learn more about electromagnetic waves and magnetic and electric fields here: https://brainly.com/question/11647801?referrer=searchResults                                          

I hope it helps you!

Answer:

Triton is the largest of Neptune's 13 moons. It is unusual because it is the only large moon in our solar system that orbits in the opposite direction of its planet's rotation―a retrograde orbit. ... Like our own moon, Triton is locked in synchronous rotation with Neptune―one side faces the planet at all times.

Answer:

An object in either state of equilibrium must have no net force acting on it.

Explanation:

Answer: An object in either state of equilibrium must have no net force acting on it.

Explanation: