Answer:
1. The solution to question 1 is as follows;
srand(seedVal);
cout<<rand()%10<<endl;
cout<<rand()%10<<endl;
2. The solution to question 2 is as follows
cout<<100+rand()%50 <<endl;
cout<<100+rand()%50 <<endl;
Explanation:
The general syntax to generate random number between interval is
Random Number = Lower Limit + rand() % (Upper Limit - Lower Limit + 1)
In 1;
The solution starts by calling srand(seedVal);
The next two statements is explained as follows
To print two random integers between intervals of 0 and 9 using rand()"
Here, the lower limit = 0
the upper limit = 9
By substituting these values in the formula above; the random number will be generated as thus;
Random Number = 0 + rand() % (9 - 0 + 1)
Random Number = 0 + rand() % (10)
Random Number = rand() % (10)
So, the instruction to generate the two random variables is rand() % (10)
2.
Similar to 1 above
To print two random integers between intervals of 100 and 149 using rand()"
Here, the lower limit = 100
upper limit = 149
By substituting these values in the formula above; the random number will be generated as thus;
Random Number = 100 + rand() % (149 - 100 + 1)
Random Number = 100 + rand() % (50)
So, the instruction to generate the two random variables is 100 + rand() % (50)
The U.S. continues to become more dependent on the global domain within the information environment consisting of the interdependent network of information technology infrastructures, including the Internet, telecommunications networks, computer systems, and embedded processors and controllers. It is imperative that we safeguard this domain known as _____.
Answer:
cyberspace
Explanation:
It is the notional environment in which communication over computer networks occurs.
It is imperative that we safeguard this domain known as cyberspace.
What is cyberspace?The meaning of the cyberspace is the climate of the Internet.
There is large network of computers connected together in offices or organizations to explore the internet. The cyberspace has formed the first important needed thing in this century without which nothing can be done in personal space or in any companies.
The U.S. continues to become more dependent on the global domain within the information environment consisting of the interdependent network of information technology infrastructures, including the Internet, telecommunications networks, computer systems, and embedded processors and controllers.
So, we safeguard this domain known a cyberspace.
Learn more about cyberspace.
https://brainly.com/question/832052
#SPJ2
Which component allows you to enjoy cinematic
or 3-D effects on your computer?
A.Cache memory
B.Ethernet port
C.external hard drive
D.video and sound cards
external hard drive
external hard drive
Answer:
Amswer would be D
Explanation:
Python high school assignment: please keep simpleIn pythonInstructionsUse the following initializer list:w = ["Algorithm", "Logic", "Filter", "Software", "Network", "Parameters", "Analyze", "Algorithm", "Functionality", "Viruses"]Write a loop that prints the words in uppercase letters.Sample RunALGORITHMLOGICFILTERSOFTWARENETWORKPARAMETERSANALYZEALGORITHMFUNCTIONALITYVIRUSES
Answer:
w = ["Algorithm", "Logic", "Filter", "Software", "Network", "Parameters", "Analyze", "Algorithm", "Functionality", "Viruses"]
for i in range (len(w)):
print(w[i].upper())
Explanation:
every element needs to be upper cased
A loop that prints the words in uppercase letters is written below with the help of Python.
What is a function?Simply said, a function is a "chunk" of code that you may reuse repeatedly so instead of having to write it out several times. Software developers can divide an issue into smaller, more manageable parts, which can each carry out a specific task, using functions.
A function, according to a technical definition, is a relationship between an amount of parameters and a set of potential outputs, where every other input is connected to precisely one output.
All the functions are to be written in uppercase:
w = ["Algorithm", "Logic", "Filter", "Software", "Network", "Parameters", "Analyze", "Algorithm", "Functionality", "Viruses"]
for i in range (len(w)):
print(w[i].upper())
Learn more about function, Here:
https://brainly.com/question/29050409
#SPJ5
Which of the following meanings of the plus sign, +, are built-in to the language (and/or standard libraries or classes that we have been using with the language)?
A. Numeric subtraction
B. Numeric addition
C. string concatenation
D. The logical "or" operation
Answer:
Numeric Addition
Explanation:
Literally, the + sign is an arithmetic operator used to perform addition operation between numeric datatypes (integer, float, decimal, double, long integer, etc...)
Its default built in function of the plus is sign is to add variables, constants and/or expressions.
The plus sign is used as follows;
a = 5;
b = 3;
c = a + b
-------------
a + b = 5 + 3 = 8
8 will be saved in variable c. This is only possible using the plus sign.
The plus sign also has other function such as string concatenation but this function is language dependent (i.e. some programming languages do not use + for string concatenation).
Conclusively, the built in function of the plus sign is for numeric addition
Write a program that displays a menu allowing the user to select air, water, or steel, and then has the user enter the number of feet a sound wave will travel in the selected medium. The program should then compute and display (with four decimal places) the number of seconds it will take. Your program should check if the user enters a valid menu choice, if not, it should terminate with an appropriate message.
Answer:
yooooooooooooooooooooo
Explanation:
Create a Python program that: Allows the user to enter a person's first name and last name. The user should be able to enter as many names as they desire. Create a function that takes the first name and last name, puts them together with the last name first, followed by the first name; with the names separated by commas. Take the result from the function, and place the resulting name in a list. Once the user finishes entering names, sort the contents of the list. Write the sorted names from a list into a text file. When you create the text file, allow the user to enter a name for the file to be created. After you finish writing names to the file, close the file and end the program.
Answer:
#main function start
def main():
#list to store names entered by user
name_list=[]
#variable to take input from user to keep rotating the loop and take input from user again and again
ch='y'
fname=""
lname=""
while ch=='y' or ch=='Y':#keep the loop taking input from user till user do not want to enter more
#take input from user
name=[]
fname=input("Enter first name: ")
lname=input("Enter last name: ")
name.append(fname)
name.append(lname)
#append the previously input first and last name in main list
name_list.append(name)
ch=input("Do you want to continue: (y/Y for yes)")
#main function end
#get file name from user
filename=input("Enter output file name")
#open file in write mode
file=open(filename,"w")
#keep loop add data in file till main list 'name_list' have
for i in name_list:
#Write data in file
file.write("%s, %s\r\n" % (i[0],i[1]))
#close the file
file.close()
#call main function
main()
Explanation:
input the above code and see output
What is an accessory?
A.a security setting that controls the programs children can use
B.a tool that provides proof of identity in a computing environment
C.a set of programs and applications that help users with basic tasks
D.a set of gadgets and widgets that makes it easier to create shortcuts
Answer:
C
Explanation:
Accessories are in Microsoft windows, a set of programs and applications that help users with some basic tasks
For this assignment, you will create flowchart using Flow gorithm and Pseudocode for the following program example: Hunter Cell Phone Company charges customer's a basic rate of $5 per month to send text messages. Additional rates apply as such:The first 60 messages per month are included in the basic billAn additional 10 cents is charged for each text message after the 60th message and up to 200 messages.An additional 25 cents is charged for each text after the 200th messageFederal, state, and local taxes add a total of 12% to each billThe company wants a program that will accept customer's name and the number of text messages sent. The program should display the customer's name and the total end of the month bill before and after taxes are added.
Answer:
The pseudocode is as given below while the flowchart is attached.
Explanation:
The pseudocode is as follows
input customer name, number of texts
Set Basic bill=5 $;
if the number of texts is less than or equal to 60
Extra Charge=0;
If the number of texts is greater than 60 and less than 200
number of texts b/w 60 and 200 =number of texts-60;
Extra Charge=0.1*(number of texts b/w 60 and 200);
else If the number of texts is greater than 200
number of texts beyond 200 =number of texts-200;
Extra Charge=0.25*(number of texts beyond 200)+0.1*(200-60);
Display Customer Name
Total Bill=Basic bill+Extra Charge;
Total Bill after Tax=Total Bill*1.12;
Programming CRe-type the code and fix any errors. The code should convert non-positive numbers to 1.
if (userNum > 0)
printf("Positive.\n");
else
printf("Non-positive, converting to 1.\n");
user Num = 1;
printf("Final: %d\n", userNum);
1 #include Hem
int main(void) {
int userNum;
scanf("%d", &userNum);
return 0;
Answer:
Given
The above lines of code
Required
Rearrange.
The code is re-arrange d as follows;.
#include<iostream>
int main()
{
int userNum;
scanf("%d", &userNum);
if (userNum > 0)
{
printf("Positive.\n");
}
else
{
printf("Non-positive, converting to 1.\n");
userNum = 1;
printf("Final: %d\n", userNum);
}
return 0;
}
When rearranging lines of codes. one has to be mindful of the programming language, the syntax of the language and control structures in the code;
One should take note of the variable declarations and usage
See attachment for .cpp file
Suppose you have 9 coins and one of them is heavier than others. Other 8 coins weight equally. You are also given a balance. Develop and algorithm to determine the heavy coin using only two measurements with the help of the balance. Clearly write your algorithm in the form of a pseudocode using the similar notation that we have used in the class to represent sorting algorithms
Answer:
Following are the algorithm to this question:
Find_Heavier_Coins(Coin[9]):
i) Let Coin[] Array represent all Coins.
ii) Divide coin[] into 3 parallel bundles and each has three coins, example 0-2, 3-5, 6-8 indicate a1 a2 a3
iii) Randomly select any two bundles and place them in balance [say a1 and a2]
iv) If Weigh of a1 and a2 has same:
// checking that if a3 has heavier coin
Choose any two 6-8 coins and place them onto balance [say 6 and 8]
If those who weigh has the same weight:
Third coin is coin heavier [say 7]
else:
The coin [6 or 8] is the one which is heavier on the balance
else:
//The coin has the package which would be heavier on the balance [say a1]
Select any two coins on balance from of the heavier package [say 0 and 1]
If they weigh the same weight:
Third coin is coin heavier [say 2]
else:
The coin that is heavier on the balance is the [or 0]
Explanation:
In the above-given algorithm code, a method Find_Heavier_Coins is declared which passes a coin[] array variable in its parameters. In the next step, if conditional block is used that checks the values which can be described as follows:
In the first, if block is used that checks a1 and a2 values and uses another if block in this it will print a3 value, else it will print 6 to 8 value. In the another, if the block it will check third coins value and prints its value if it is not correct it will print first coin valueA number of LC-3 instructions have an "evaluate address" step in the instruction cycle, in which a 16-bit address is constructed and written to the Memory Address Register via the MARMUX. List all LC-3 instructions that write to the MAR during the evaluate address phase of the instruction cycle, with the Register Transfer description of each.
Answer: you want to list all LC structers
Explanation:
The degree of a point in a triangulation is the number of edges incident to it. Give an example of a set of n points in the plane such that, no matter how the set is triangulated, there is always a point whose degree is n−1.
Answer:
squarepentagonExplanation:
The vertices of a square is one such set of points. Either diagonal will bring the degree of the points involved to 3 = 4-1.
The vertices of a regular pentagon is another such set of points. After joining the points in a convex hull, any interior connection will create a triangle and a quadrilateral. The diagonal of the quadrilateral will bring the degree of at least one of the points to 4 = 5-1.
In this assignment, you will develop a C++ program and a flowchart that calculates a cost to replace all tablets and desktop computers in a business. Customers paying cash get a ten percent discount applied to the total cost of the computers (desktop and tablets). Customers financing the purchase incur a fifteen percent finance charge based on the total cost of the computers (desktop and tablets). Tablets costs $320.00 each and desktops costs $800.00 each. The tax is 75% (.075).
Requirements:
⦁ Use the following variables of the appropriate type: name of company selling the computers, the cost per each type of computer, number of computers to be purchased, discount if paying cash, sales tax rate. Tablets =$320 each and desktop computers = $800.00 each. Sales Tax Rate = .075, Discount Percent = .10, and Finance Charge = .15.
⦁ Variable names must be descriptive.
⦁ Use additional variables to hold subtotals and totals.
⦁ For customers paying cash, the discount should be subtracted from the total computer cost.
⦁ For customers financing the purchase, the finance charge should be added to the total computer cost.
⦁ The body of your program must use variables only; there should not be any "hard coded" values in the output statements. An example of hardcoding is
***Cost of tablets = 4 * 320****.
⦁ Use cout to output the values of the variables to the console. Your cout statement MUST use the variables to display the values
⦁ Display the cost of the computers, tax and average cost per computer. The average cost will be the total cost divided by the number of computers purchased. Display the discount if the customer decides to pay cash or the finance charge if the customer finances the purchase.
⦁ Output must be labelled and easy to read as shown in the sample output below.
⦁ Program must be documented with the following:
⦁ // Name
⦁ // Date
⦁ // Program Name
⦁ // Description
⦁ Develop a flowchart
Hints:
Total cost of computers = cost per tablet * number of tablets purchased + cost per desktop * number of desktops purchased
Calculate the cost if paying cash or financing
Calculate the tax
Average cost per computer = Total computer cost divided by the number of computers purchased
Answer:
Explanation:
The objective of this program we are to develop is to compute a C++ program and a flowchart that calculates a cost to replace all tablets and desktop computers in a business.
C++ Program
#include<iostream>
#include<iomanip>
using namespace std;
/*
⦁ // Name:
⦁ // Date:
⦁ // Program Name:
⦁ // Description:
*/
int main()
{
const double SalesTaxRate = .075, DiscountPercent = .10, FinanceCharge = .15;
const double TABLET = 320.00, DESKTOP = 800.00;
double total = 0.0, subTotal = 0.0,avg=0.0;
int numberOfTablets, numberOfDesktop;
cout << "-------------- Welcome to Computer Selling Company ------------------ ";
cout << "Enter number of tablets: ";
cin >> numberOfTablets;
cout << "Enter number of desktops: ";
cin >> numberOfDesktop;
subTotal = TABLET * numberOfTablets + numberOfDesktop * DESKTOP;
char choice;
cout << "Paying cash or financing: (c/f): ";
cin >> choice;
cout << fixed << setprecision(2);
if (choice == 'c' || choice == 'C')
{
cout << "You have choosen paying cash." << endl;
total = subTotal - subTotal * DiscountPercent;
cout << "Discount you get $" << subTotal * DiscountPercent<<endl;
cout << "Sales Tax: $" << SalesTaxRate * total << endl;
total = total + total * SalesTaxRate;
cout << "Total computers' Cost: $" << total << endl;
avg = total / (numberOfDesktop + numberOfTablets);
cout << "Average computer cost: $ " << avg << endl;
}
else if (choice == 'f' || choice == 'F')
{
cout << "You have choosen Finance option." << endl;
total = subTotal + subTotal * FinanceCharge;
cout << "Finance Charge $" << subTotal * FinanceCharge << endl;
cout << "Sales Tax: $" << SalesTaxRate * total << endl;
total = total + total * SalesTaxRate;
cout << "Total computers' Cost: $" << total << endl;
avg = total / (numberOfDesktop + numberOfTablets);
cout << "Average computer cost: $ " << avg << endl;
}
else
{
cout << "Wrong choice.......Existing.... ";
system("pause");
}
//to hold the output screen
system("pause");
} }
OUTPUT:
The Output of the program is shown in the first data file attached below:
FLOWCHART:
See the second diagram attached for the designed flowchart.
A small publishing company that you work for would like to develop a database that keeps track of the contracts that authors and publishers sign before starting a book. What fields do you anticipate needing for this database
Answer:
The database can include the fields related to the Author such as name and address, related to Publisher such as publisher's name and address, related to book such as title and ISBN of the book and related to contract such as payment schedule, contract start and end.
Explanation:
The following fields can be needed for this database:
Author First_NameAuthor's Last_NameAuthors_addressPublisher_namePublisher_addressBook_titleBook ISBNcontract date : this can be start_date (for starting of contract) and end_date ( when the contract ends) payment_made: for payment schedule.The following are reasons why many organizations are trying to reduce and right-size their information foot-print by using data governance techniques like data cleansing and de-duplication:
A. None of the above
B. reduce risk of systems failures due to overloading
C. improve data quality and reduce redundancies, reduce increased and staggering storage management costs,
D. Both A and B
Answer:
C. improve data quality and reduce redundancies, reduce increased and staggering storage management costs
Explanation:
Excess data retention can lead to retention of redundant and irrelevant data, which can reduce data handling and processing efficiency, while at the same time increasing the cost of data storage and management. This can be curbed be reducing data to the right size by using data governance techniques like data cleansing and de-duplication
Suppose that the following two classes have been declared public class Car f public void m1) System.out.println("car 1"; public void m2) System.out.println("car 2"); public String toString) f return "vroom"; public class Truck extends Car public void m1) t System.out.println("truck 1"); public void m2) t super.m1); public String toString) t return super.toString) super.toString ); Write a class MonsterTruck whose methods have the behavior below. Don't just print/return the output; whenever possible, use inheritance to reuse behavior from the superclass Methog Output/Return monster 1 truck1 car 1 m2 toString "monster vroomvroom'" Type your solution here:
Answer: provided in the explanation section
Explanation:
// code to copy
Car.java
public class Car {
public void m1()
{
System.out.println("car 1");
}
public void m2() {
System.out.println("car 2");
}
public String toString()
{
return "vroom";
}
}
Truck.java
public class Truck extends Car{
public void m1()
{
System.out.println("truck 1");
}
public void m2()
{
super.m1();
}
public String toString()
{
return super.toString() + super.toString();
}
}
MonsterTruck.java
public class MonsterTruck extends Truck
{
public void m1() {
System.out.println("monster 1");
}
public void m2() {
super.m1();
super.m2();
}
public String toString() {
return "monster " + super.toString();
}
public static void main(String[] args) {
MonsterTruck mt=new MonsterTruck();
mt.m1();
mt.m2();
System.out.println(mt);
}
}
cheers i hope this helped !!!
Write a program that reads integers start and stop from the user, then calculates and prints the sum of the cubes (=> **3) of each integer ranging from start to stop, inclusive. "Inclusive" means that both the values start and stop are included.
Answer:
This program is written in python programming language
Comments are used for explanatory purpose;
Take note of indentations(See Attachment)
Program starts here
#Initialize Sum to 0
sum = 0
#Prompt user for start value
start= int(input("Start Value: "))
#Prompt user for stop value
stop= int(input("Stop Value: "))
#Check if start is less than stop
if(start<=stop):
#Iterate from start to stop
for i in range(start, stop+1, 1):
sum+=i**3
else:
print("Start must be less than or equal to Stop")
#Display Result
print("Expected Output: ",sum)
#End of Program
A(n) _____ element, as described by the World Wide Web Consortium (W3C), is an element that "represents a section of a page that consists of content that is tangentially related to the content around that element, and which could be considered separate from that content."
Answer:
B. Aside element
Explanation:
The options for this question are missing, the options are:
A. article element
B. aside element
C. section element
D. content element
An aside element is defined as a section of a page that has content that is tangentially related to the content around the element. In other words, the aside element represents content that is indirectly related to the main content of the page. Therefore, we can say that the correct answer to this question is B. Aside element.
Write a program that reads in investment amount, annual interest rate, and number of years, and displays the future investment value using the following formula: futureInvestmentValue = investmentAmount * (1 + monthyInterestRate)numberOfYears*12. For example if you enter amount 1000, annual interest rate 3.25%, and number of years 1, the future investment value is 1032.98.NB: Please make sure to use the NumberFormat coding for currency to display your results. (Java Programming)
Answer:
Following are the code to this question:
import java.util.*; //importing package for user input
public class Main //defining class
{
public static void main(String []ar) //defining main method
{
double investment_amount,interest_rate,future_investment_value; //defining double variables
int years; //defining integer variable
Scanner obx=new Scanner(System.in); //creating Scanner class Object
System.out.print("Enter invest value: "); //print message
investment_amount=obx.nextDouble(); //input value
System.out.print("Enter interest rate: ");//print message
interest_rate=obx.nextDouble();//input value
System.out.print("Enter number of years: ");//print message
years=obx.nextInt();//input value
future_investment_value=investment_amount*Math.pow((1+interest_rate/1200.),years*12); //calculating value by apply formula
System.out.println("you enter amount: $"+investment_amount); //print calculated value
System.out.println("annual interest rate:"+interest_rate+"%");//print calculated value
System.out.printf("Number of years: "+years+" the future investment value is :$%.2f\n",future_investment_value);//print calculated value
}
}
output:
please find the attachment.
Explanation:
Program Description:
In the above-given program, inside the main method, a variable is declared that are investment_amount, interest_rate, future_investment_value, and years, in which only year variable is an integer type and other variables are double types.In the next step, a scanner class object that is "obx" is created, which is used to input value from the user end, in the next line we apply the formula to calculate the future_investment_value.At the last step, we all the input and a calculated valueYou are working at the Acme company that has the following environment: 400 Windows Servers 2. 8000 Windows client devices (laptops running Windows os) 40 Linux servers Active Directory Domain Services to provide dns services to all the hosts, both Windows and Linux. Acme acquires a small research company, Uni-Tech that uses Unix servers for all of its applications. For host resolution they use BIND
a. Describe what BIND is and what the acronym stands for? BIND stands for Berkley Internet Name Domain. BIND allows you to pick one of your computers to act as the DNS server.
b. This acquisition happens very quickly and on day one the business needs people at Uni-Tech to connect to hosts at Acme using hosts names that can be resolved by Active Directory. Describe a method for integrating the two environments that does not require too many individual tasks that will take many hours. (10) Describe how you would test to make sure your integration is working correctly.
Answer: Provided in the explanation section
Explanation:
(a). BIND is a type of DNS server used on the internet, actually it is reported to be most widely used DNS server on the internet. Also BIND is the de-facto standard on Unix like operating systems and Linux. Thus it can be used to locate computers on a network using domain names instead of their IP addresses. BIND was originally programmed at the University of California, Berkeley in the 1980s, this was made possible by a grant from US based DARPA program.
Originally, BIND stood for Berkeley Internet name daemon, but nowadays it is called Berkeley Internet name domain.
(b). In some of the clients in windows and Windows servers we will install LDP. By the LDP.exe we can test tDNS, Active directory woking , even we can add or modify. LDP is used to test and verify the Active Directory objects. We will install in windows machine then open the software, then from the menu we will select connect and type the IP adress of the Active Directory then we will select or type the objects of Active directory. For Linux system we have to openldap and can search the AD.
From Linux or Unix we can use the nmap tool which can test the network connectivity between all the computers whether it is windows or Linux. By nmap we can test by ICMP protocol to verify the network connectivity. By nmap we can scan all the port which are required to open from client to the server. We can also use nslookup to test DNS server from the client. By nslookup we can check that client can connect the server.
A(n) ________ is a server-based operating system oriented to computer networking and may include directory services, network management, network monitoring, network policies, user group management, network security, and other network-related functions.
Answer:
Network Operating System (NOS)
Explanation:
A network operating system (NOS) is an operating system that makes different computer devices connect to a common network in order to communicate and share resources with each other using a server. A network operating system can be used by printers, computers, file sever among others, and they are connected together using a local area network. This local area network which they are connected to works as the server.
The NOS also acts as a network security because it could be used as an access control or even user authentication.
There are two types of NOS
1) Peer to peer network operating system.
2) Client/server network operating system
A network operating system (NOS) is a server-based operating system oriented to computer networking and may include directory services, network management, network monitoring, network policies, user group management, network security, and other network-related functions.
Transaction is an action or series of actions the execution of which should lead to a consistent database state from another consistent database state. Discuss which properties that transactions should have for their correct executions. Provide two examples to support your answer.
Explanation:
A transaction is a very small system unit that can contain many low-level tasks. A transaction in a database system should maintain, Atomicity, Consistency, Isolation, and Durability − these are commonly known as ACID properties − in order to ensure accuracy, completeness, and integrity of the data.
An example of a simple transaction is as below, Suppose a bank employee transfers Rs 500 from A's account to B's account.
A’s Account
Open_Account(A)
Old_Balance = A.balance
New_Balance = Old_Balance - 500
A.balance = New_Balance
Close_Account(A)
B’s Account
Open_Account(B)
Old_Balance = B.balance
New_Balance = Old_Balance + 500
B.balance = New_Balance
Close_Account(B)
Look at these examples:- • Men are not emotional. • Women are too emotional. • Jewish people are good business people. • The French are great lovers. • Old people are useless. • Young people are sex mad. • Black people are poor. • Thin people are self-disciplined. • Fat people are clumsy. • Rock stars are drug addicts. To what extent do you agree with these statements? Make a note of which ones you agree with
Answer:
None
Explanation:
These are all stereotypes. Sure, there are definitely some people who fit their stereotypes, but not all. It's just a generalization at the end of the day. I can't really agree with any of them due to the fact that it's all stereotyping.
Perhaps you feel differently, and believe that some of these example are true. I can't though, sorry. Hope this take helps.
Write a short program in C that will display the following information:
Name : Phones:
email:
Hometown:
High School(s):
Previous colleges:
List college math/CS courses:
What, when, and where was your last math and cs course?
Type(s) of computers that you are confident working on:
Extracurricular activities (jobs, clubs, sports, etc.)
Favorite books, movies, music:
What you plan to do after graduation? (Be as specific as you can.)
Be sure to include all necessary documentation within your code
Answer:
Explanation:
The objective of this question and what we are meant to do is to compute a short program in C++ that will display the information given in the question.
Let get started!.
C ++ Program Code.
#include <iostream>
#include<string>
using namespace std;
int main()
{
string name,email,hometown,highschool,previousColleges,mathOrCSCource,lastMathOrCSCource,CompType,ExtraCur,FavBook
,planAfterGrad,phone;
//Reading Data
cout<<"Name:";
getline(cin,name);
cout<<"Phone:";
getline(cin,phone);
cout<<"Email:";
getline(cin,email);
cout<<"HomeTown:";
getline(cin,hometown);
cout<<"High School(s):";
getline(cin,highschool);
cout<<"Previous Colleges:";
getline(cin,previousColleges);
cout<<"List of math/CS Cources:";
getline(cin,mathOrCSCource);
cout<<"When,Where and what was your last math or CS course:";
getline(cin,lastMathOrCSCource);
cout<<"Type(s) of computer you are confident working with:";
getline(cin,CompType);
cout<<"ExtraCurricular Activities (job,club,sports,etc.):";
getline(cin,ExtraCur);
cout<<"Favourite books,movies,music:";
getline(cin,FavBook);
cout<<"What you plan to do after Graduation:";
getline(cin,planAfterGrad);
//Printing data
cout<<"--------------------Printing Data---------------------------"<<endl;
cout<<"Name:"<<name<<endl;
cout<<"Phone:"<<phone<<endl;
cout<<"Email:"<<email<<endl;
cout<<"HomeTown:"<<hometown<<endl;
cout<<"High School(s):"<<highschool<<endl;
cout<<"Previous Colleges:"<<previousColleges<<endl;
cout<<"List of math/CS Cources:"<<mathOrCSCource<<endl;
cout<<"When,Where and what was your last math or CS course:"<<lastMathOrCSCource<<endl;
cout<<"Type(s) of computer you are confident working with:"<<CompType<<endl;
cout<<"ExtraCurricular Activities (job,club,sports,etc.):"<<ExtraCur<<endl;
cout<<"Favourite books,movies,music:"<<FavBook<<endl;
cout<<"What you plan to do after Graduation:"<<planAfterGrad<<endl;
return 0;
}
Output values below an amount
Write a program that first gets a list of integers from input. The input begins with an integer indicating the number of integers that follow. Then, get the last value from the input, and output all integers less than or equal to that value.
Ex: If the input is 5 50 60 140 200 75 100, the output is:
For coding simplicity, follow every output value by a space, including the last one.
Such functionality is common on sites like Amazon, where a user can filter results.
LAB
ACTIVITY
8.3.1: LAB: Output values below an amount
0 / 10
Submission Instructions
These are the files to get you started.
main.cpp
Download these files
Compile command
g++ main.cpp -Wall -o a.out
We will use this command to compile your code
Answer:
def output_ints_less_than_or_equal_to_threshold(user_values, upper_threshold):
for value in user_values:
if value < upper_threshold:
print(value)
def get_user_values():
n = int(input())
lst = []
for i in range(n):
lst.append(int(input()))
return lst
if __name__ == '__main__':
userValues = get_user_values()
upperThreshold = int(input())
output_ints_less_than_or_equal_to_threshold(userValues, upperThreshold)
Explanation:
Java programing:
Add two more statements to main() to test inputs 3 and -1. Use print statements similar to the existing one (don't use assert)
import java.util.Scanner;
public class UnitTesting {
// Function returns origNum cubed
public static int cubeNum(int origNum) {
return origNum * origNum * origNum;
}
public static void main (String [] args) {
System.out.println("Testing started");
System.out.println("2, expecting 8, got: " + cubeNum(2));
/* Your solution goes here */
System.out.println("Testing completed");
return;
}
}
__________
Answer:
import java.util.Scanner;
public class UnitTesting {
// Function returns origNum cubed
public static int cubeNum(int origNum) {
return origNum * origNum * origNum;
}
public static void main (String [] args) {
System.out.println("Testing started");
System.out.println("2, expecting 8, got: " + cubeNum(2));
System.out.println("3, expecting 27, got: " + cubeNum(3));
System.out.println("-1, expecting -1, got: " + cubeNum(-1));
System.out.println("Testing completed");
return;
}
}
Explanation:
Added statements are highlighted.
Since the cubeNum function calculates the cube of the given number and we are asked to write two statements to test inputs 3 and -1, pass the parameters 3 and -1 to the function called cubeNum and print the results using print statements
You are a network technician for a small corporate network that supports 1000 Mbps (Gigabit) Ethernet. The manager in the Executive Office says that his network connection has gone down frequently over the past few days. He replaced his Ethernet cable, but the connection problem has continued. Now his network connection is either down or very slow at all times. He wants you to install a new 1000 Mbps Ethernet network card in his workstation to see if that solves the problem.
If the new card does not resolve the issue, you will need to perform troubleshooting tasks to find the cause of the issue and confirm that the problem is fixed after you implement a solution. Following are some troubleshooting tasks you can try:
• Use the Network and Sharing Center and the ipconfig command on the Exec workstation to check for a network connection or an IP address.
• Look at the adapter settings to see the status of the Ethernet connection.
• Use the ping command to see if the workstation can communicate with the server in the Networking Closet. (See the exhibit for the IP address.)
• View the network activity lights for all networking devices to check for dead connections. In this lab, your task is to complete the following:
1. Install a new Ethernet adapter in one of the open slots in the Exec workstation per the manager's request.
2. Make sure that the new adapter is connected to the wall outlet with a cable that supports Gigabit Ethernet.
3. Resolve any other issues you find using the known good spare components on the Shelf to fix the problem and restore the manager's internet connection.
After you replace the network adapter and resolve the issues you found while troubleshooting, use the Network and Sharing Center to confirm that the workstation is connected to the network and the internet
If necessary, click Exhibits to see the network diagram and network wiring schematics.
Answer:
The step by step explanation
Explanation:
Before doing anything, the first thing to do is to select the 100BaseTX network adapter and reconnect the Cat5e cable. The 100BaseTX network adapter supports Fast
Ethernet which is all that is required.
Now do the following steps:
Step one
In Office 2, switch to the motherboard view of the computer (turning off the workstation as necessary).
Step two
On the Shelf, expand the Network Adapters category.
Step three
Identify the network adapter that supports Fast Ethernet 100BaseTX. Drag the network adapter from the Shelf to a
free PCI slot on the computer.
Step four
To connect the computer to the network, switch to the back view of the computer.
Step five
Drag the Cat5 cable connector from the motherboard's NIC to the port of the 100BaseTX network adapter.
Step six
To verify the connection to the local network and the Internet, switch to the front view of the computer.
Step seven
Click the power button on the computer case.
Step eight
After the workstation's operating system is loaded, click the networking icon in the notification area and click
Open Network and Sharing Center. The diagram should indicate an active connection to the network and the
Internet.
For one to be able to confirm the speed of the connection, it can be done by clicking the Local Area Connection link in the Network and
Sharing Center.
Write a short assembly language program in either our 8088 SCO DOSBox or 80386+ MASM Visual Studio 2017 environment that demonstrates data storage and retrieval from memory. As an example consider some value which is either 16 or 32 bits, after instantiating as an immediate value transfer to and retrieve from memory using assembly language instructions.
Answer: provided in the explanation section
Explanation:
The question says:
Write a short assembly language program in either our 8088 SCO DOSBox or 80386+ MASM Visual Studio 2017 environment that demonstrates data storage and retrieval from memory. As an example consider some value which is either 16 or 32 bits, after instantiating as an immediate value transfer to and retrieve from memory using assembly language instructions.
The Answer:
multi-segment executable file template. data segment ; add your data here! pkey db "press any key...$" ends stack segment dw 128 dup(0) ends code segment start: ; set segment registers: mov ax, data mov ds, ax mov es, ax ; add your code here mov cx,4 input: mov ah,1 int 21h push ax loop input mov dx,13d mov ah,2 int 21h mov dx,10d mov ah,2 int 21h mov cx,4 output: pop bx mov dl,bl mov ah,2 int 21h loop output exit: lea dx, pkey mov ah, 9 int 21h ; output string at ds:dx ; wait for any key....
mov ah, 1 int 21h mov ax, 4c00h ; exit to operating system. int 21h ends end start ;
set entry point and stop the assembler.
Cheers I hope this helps!!!
Array A is not a heap. Clearly explain why does above tree not a heap? b) Using build heap procedure discussed in the class, construct the heap data structure from the array A above. Represent your heap in the array A as well as using a binary tree. Clearly show all the steps c) Show how heap sort work in the heap you have constructed in part (b) above. Clearly show all the step in the heap sort
Answer:
Sorted Array A { } = { 1, 4, 23, 32, 34, 34, 67, 78, 89, 100 }
Explanation:
Binary tree is drawn given that the binary tree do not follow both minimum heap and maximum heap property, therefore, it is not a heap.
See attached picture.
Write a program that keeps track of where cars are located in a parking garage to estimate the time to retrieve a car when the garage is full. This program will demonstrate the following:_________.
How to create a list for use as a stack,
How to enter and change data in a stack.
Answer: Provided in the explanation section
Explanation:
Code to use;
# Define the main() function.
def main():
# Declare the required variables.
stack_cars = []
move_time = 1
retrieve_time = 2
# Start the loop to display the menu.
while True:
# Display the choices to the user.
print("\n\t\t\t Car Stack Menu")
print("\n1. Add a car")
print("2. Retrieve a car")
print("3. Show the car stack")
print("4. Exit")
# Prompt the user to enter the input.
choice = input("\nEnter your choice: ")
# Append the car in the stack if the choice is 1.
if choice == '1':
car = input("Enter the car name to add: ")
stack_cars.append(car)
# Remove the car from the stack if the choice is 2.
elif choice == '2':
car = input("Enter the car name to retrieve: ")
# Display the error message if the car is not present.
if car not in stack_cars:
print(car + " is not present in the stack.")
# Otherwise, compute the time to retrieve a car.
else:
# Declare a temp stack to move the cars.
temp = []
x = stack_cars.pop()
count = 0
# Start the loop to pop the cars from the stack
# until the car to be retrieved is found.
while x != car:
count += 1
# Store the car in the temp stack.
temp.append(x)
x = stack_cars.pop()
# Start the loop to move the cars back in the
# original stack.
while len(temp) != 0:
stack_cars.append(temp.pop())
# Compute and display the total time.
total_time = move_time * count + retrieve_time
print("Total time to retrieve", car, "=", total_time)
# Display the stack if the choice is 3.
elif choice == '3':
print("Car stack =", stack_cars)
# Return from the funtion if the choice is 4.
elif choice == '4':
print("Exiting from the program...")
return
# Display the message for invalid input.
else:
print("Error: Invalid choice!")
# Call the main() function.
if __name__ == "__main__":
main()
