A. applied force
force applied to an object
Answer:
A. Applied force
Explanation:
A. should be the answer because you applied force onto an object to make it move or do what you’d like.
I hope it helps! Have a great day!
Muffin~
A sample of an ideal gas at 1.00 atm and a volume of 1.96 L was placed in a weighted balloon and dropped into the ocean. As the sample descended, the water pressure compressed the balloon and reduced its volume. When the pressure had increased to 15.0 atm, what was the volume of the sample
Answer: 0.130 L
Explanation:
How many energetically equivalent ways can you distribute the particles in system a?.
The number of energetically equivalent ways that one can distribute the particles in system A and B are 1 and 6 respectively.
How to calculate the number of ways?From thx complete information, system A has only 1 distribution that's possible.
For system B, the number of ways will be:
= 3 × 2 × 1
= 6
In conclusion, the correct options are 1 and 6 respectively.
Learn more about particles on:
https://brainly.com/question/80295
If 162.35 g aluminum hydroxide are dissolved in 6750 mL of solution, what is the concentration of the solution?
If 162.35 g aluminum hydroxide are dissolved in 6750 mL of solution, the concentration of the solution is 0.308M
How to calculate concentration?The concentration of a solution can be calculated using the following formula:
Molarity = no of moles ÷ volume (L)
However, the number of moles in 162.35g of Al(OH)3 must be calculated as follows:
Molar mass of Al(OH)3 = 78g/mol
no of moles = 162.35g ÷ 78mol
no of moles = 2.08mol
Molarity = 2.08mol ÷ 6.75L
Molarity = 0.308M
Therefore, if 162.35 g aluminum hydroxide are dissolved in 6750 mL of solution, the concentration of the solution is 0.308M.
Learn more about molarity at: https://brainly.com/question/2817451
A buffer solution is prepared by adding NH4Cl to a solution of NH3 (ammonia).
NH3(aq) + H2O(I) = NH4+(aq) +OH-(aq0
What happens if Ca(NO3)2 is added?
Shifts to reactants, remain the same, shifts to products.
Please HELP!
I watched the video, but I still don't get it!
I don't know how this works
Answer:
Remains the same
Explanation:
I just got it right on Acellus!
Draw the organic products of the reaction shown. Draw hydrogens on oxygen and nitrogen where appropriate and draw charges where needed.
The products of chemical reactions are made up of the atoms of the reactants.
What are organic products?Organic products are chemical compounds that are obtained in a reaction in which there are organic compounds or elements as reactants. The basic types of organic chemical reactions are:
Addition reactions.Elimination reactions.Substitution reactions.Organic redox reactions.How to identify an organic product?To identify an organic product we must take into account that all organic chemical compounds have carbon in their composition.
Note: This question is incomplete because there is some information missing. However I can answer it based on my general prior knowledge.
Learn more about organic reactions in: https://brainly.com/question/9585105
Sodium combines with water to produce sodium hydroxide and hydrogen gas. which word equation represents this violent reaction? sodium hydroxide water right arrow. sodium hydrogen sodium water right arrow. sodium hydroxide hydrogen sodium hydrogen right arrow. sodium hydroxide water sodium sodium hydroxide right arrow. water hydrogen
Answer:
B.) sodium water right arrow. sodium hydroxide hydrogen
Explanation:
Reactants are listed before the arrow and products are listed after the arrow. This symbolizes the reactants turning into the products.
Reactants --> Products
Reactants are the molecules which react with each other to make new molecules. Since sodium and water are being combined, they are the starting molecules. Products are the molecules made after a reaction occurs. Sodium hydroxide and hydrogen gas are produced, making them the ending molecules. The balanced chemical equation is:
2 Na⁺ (s) + 2 H₂O (l) --> 2 NaOH (s) + H₂ (g)
What is the oxidation number of chromium in sodium dichromate, na2cr2o7?.
Answer:+6
Explanation:Oxygen always has an ON of -2 so when there’s O7 the total is -12. Sodium is in group 1 so has an ON of +1 that means with two of them it’s overall ON is +2. When you combine the two that equals -12 but you want it to equal 0. So it would be +12. Considering there are two chromium present you would divide that by 2 making the answer +6.
What does Earth rotate on? (2 points)
a
Its axis
b
Its continents
c
Its countries
d
Its poles
help asap i'll give u 100 points and brainliest
Answer:
its axis
Explanation:
the earth rotates on its axis 24 hrs a day in relation to the sun.
Part of the complement system of defense is opsonization. This process
causes the pathogen to become trapped in mucus.
coats the pathogen exterior so that it is recognized by the host's phagocytes.
creates an acidic environment that prevents pathogen attachment
causes holes to form in the pathogen's cell walls.
Answer:
The correct answer is coats the pathogen exterior so that it is recognized by the host's phagocytes. :)
To learn more about this, here is a link!!
https://brainly.com/question/13022302?referrer=searchResults
Have an amazing day!!
Please rate and mark brainliest!!!
3. describe natural sources of radiation. infer some of the dangers that radiation can impose.
Answer:
All of us are exposed to radiation every day, from natural sources such as minerals in the ground, and man-made sources such as medical x-rays. According to the National Council on Radiation Protection and Measurements (NCRP), the average annual radiation dose per person in the U.S. is 6.2 millisieverts (620 millirem).
Explanation:
Of the following substances, which one will heat up the FASTEST?
Ammonia (4.70 J/g°C)
Aluminum (0.90 J/gºC)
Gold (0.13 J/gºC)
Ethylene glycol (2.42 J/g°C)
A. Ethylene glycol
B. Aluminum
C. Ammonia
D. Gold
in titration, 25 mL of 0.2M NaOH neutralizes 20mL of HCl, what is the concentration of the HCl?
The concentration of the HCl solution needed to neutralize 25 mL of 0.2 M NaOH is 0.25 M
Balanced equationHCl + NaOH —> NaCl + H₂O
From the balanced equation above,
The mole ratio of the acid, HCl (nA) = 1The mole ratio of the base, NaOH (nB) = 1How to determine the concentration of HCl Volume of base, KOH (Vb) = 25 mLConcentration of base, NaOH (Cb) = 0.2 MVolume of acid, HCl (Va) = 20 mL Concentration of acid, HCl (Ca) =?CaVa / CbVb = nA / nB
(Ca × 20) / (0.2 × 25) = 1
(Ca × 20) / 5 = 1
Cross multiply
Ca × 20 = 5
Divide both side by 20
Ca = 5 / 20
Ca = 0.25 M
Thus, the concentration of the HCl solution is 0. 25 M
Learn more about titration:
https://brainly.com/question/14356286
What is the 2nd step in the process of natural selection?
Answer: Selection proper
Explanation:
it's an anti-chance process, but subject to many constraints
The percentage of water vapor present in the air compared to that required for saturation is the ____.
Answer:
30%
Explanation:
The relative humidity is the water-vapor content of the air relative to its content at saturation. Saturated air, for example, has a relative humidity of 100 percent, and near the Earth, the relative humidity very rarely falls below 30 percent.
6. Zn + 2HCl → ZnCl2 + H2 How many moles of HCl are produced from the reaction of 2.25 moles of zinc?
Answer:
E. 16.6 mol HCl
Explanation:
The equation for the reaction is;
Zn + 2 HCl --> ZnCl2 + H2
From the reaction 2 moles of HCl produces 1 mole of ZnCl2
Therefore; 8.3 moles of ZnCl2 will be produced by;
= 8.3 moles ×2
= 16.6 Moles of HCl
Therefore; E. 16.6 mol HCl
Which of the following is an example of an insoluble substance being added to water?
When added to water, the substance quickly falls to the bottom and then dissolves.
The substance has disappeared after being poured into the water.
The substance makes the water cloudy and then forms a layer on top of the water.
The water remains clear after the substance is stirred into the water with a spoon.
Answer:
Explanation: “Insoluble” generally means that a substance does not dissolve in water. Some examples include: sand, fats, wood, metals, and plastic. When we put them in water and try to mix them, they will not dissolve.
Explanation:
Consider these equations:
2S (s) + 3O2 (g)→2SO3 (g), ΔH = −792 kJ
2S (s) + 2O2 (g)→2SO2 (g), ΔH = −594 kJ
2SO2 (g) + O2 (g)→2SO3 (g), ΔH =?
What is the missing ΔH?
a. −294 kJ
b. −198 kJ
c. +198 kJ
d. +294 kJ
Answer: (B) −198 kJ.
If 25.0 g of NO are produced how many liters,at STP,of nitrogen gas are used?
Answer:
9 1/3 liters
Explanation:
N2 + O2 = 2 NO
Find mole weights from table of elements
N =14
O =~16 30 gm is a mole
22.4 l / mole for gases at STP
22.4 * 25/30 = 18 2/3 Liters of NO
but since Nitrogen is N2 it will take 1/2 s much = 9 1/3
*** EDITED ***
According to the stoichiometry and STP conditions if 25.0 g of NO are produced 2269 liters of nitrogen gas are used.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.1 mole of nitrogen gives 2 moles of NO, thus as per ideal gas equation which on substitution gives V=1×8.314×273/1=2269.722 liters.
Learn more about stoichiometry,here:
https://brainly.com/question/30218216
#SPJ2
Chromium (lII) sulphate reacts with potassium carbonate to form chromium (III) carbonate and potassium
sulphate.
Skeleton equation:
Answer:
Cr2(SO4)3+K2CO3---------------->Cr2(CO3)3+K2SO4
BALANCING
Cr2(SO4)3+3K2CO3------------------------->Cr2(CO3)+3K2SO4
Explanation:
Helium is most likely to behave as an ideal gas when its under what?
Answer:
Low pressure and high temperature :)
Have an amazing day!!
Please rate and mark brainiest!!
The concentration of A is initially 0.150 M before it proceeds to equilibrium. The system is at 298 K. What is the equilibrium concentration of B
For a concentration of is initially 0.150 M before it proceeds to equilibrium, the equilibrium concentration of B is mathematically given as
x=3.0*10^{-7}m
What is the equilibrium concentration of B?Generally, the equation for the change in Gibbs free energy is mathematically given as
dG=-RTInK
Therefore
31.5*10*^{3}=-(8.314)(298)(ink)
K=3*10^(-6)
Eqution
A--->B
K=x/0.1-x
x=3.0*10^{-7}m
In conclusion, the equilibrium concentration
x=3.0*10^{-7}m
Read more about Concentration
https://brainly.com/question/16979235
how many molecules of oxygen are contain in 100 ml of air at NTP? (air contains 21% oxygen by volume
Answer:
600
Explanation:
because if there's 6 molecules in each then 6×100 is 600
which has a positive impact on land
a.composing
b. deforestation
c. mining
d. urbanization
giving brainiest
[tex]\huge\tt\fbox\pink{↪Answer:–}[/tex]
[tex]▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬[/tex]
[tex]\red\bigstar\:Explanation [/tex]
Option c Deforestation.[tex]▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬[/tex]
I hope it will help you.Answer:
In some cases, changes in land use may have positive effects, such as increasing habitat (as a result of deliberate habitat restoration measures) and reclamation of previously contaminated lands for urban/suburban development.
Explanation:
BBBBBBBB
Suppose that an individual's arm is cut, and because of this injury, bacteria are able to gain entry to the body and cause disease. What type of defense has been breached (overcome)?
adaptive defense
physical defense
chemical defense
Answer:
Physical :)
Explanation:
Skin works as a shield to the outside elements and does a good job of keeping the bad stuff out. :)
Have an amazing day!!
Please rate and mark brainliest!!
Draw the lewis structure of sf2, showing all lone pairs.
Answer:
Number of valence electrons in two F atom = 2(7) = 14
Total number of valence electrons = 6 + 14 = 20 electrons
Placing a bonding pair of electrons between the atoms to form the chemical bonds.
Electrons used in bonding = 4
The remaining electrons are used as a lone pair for central or terminal atoms to achieve an octet to finish the Lewis dot structure.
Electrons used as a lone pair = 20 - 4 = 16
Explanation:
hope this helps
Sodium Hydroxide, which is a base, has a pH of _____
a
2
b
3
c
14
d
6
Answer:
c
Explanation:
Given that sodium hydroxide is a base, it's pH has to be above pH 7. Thus, option c is the correct option.
On the other hand, acids have a pH of lesser than 7 while pure water has a pH of 7. All the other options have a pH of less than 7, indicating that they are acids.
What is the average mass for
Answer:
zzzzzzzZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
When we react an acid with a base a neutralisation reaction occurs.
What pH do you end up with?
Explanation:
Good question!
When you react an acid with a base,the pH of the product is determined by the concentrations of the reactants (the acid and the base)
If both reactants (acid and base) are strong,the pH of the product is 7
If the acid is stronger than the base,the pH of the product will be less than 7
If the base is stronger,the pH of the product will be greater than 7
I hope this helps
The co32- ion is an example of a polyatomic ion with ________. a. a nonpolar bond b. linear structure c. resonance structures d. triple bonds
The Co32- ion is a polyatomic molecule and have resonance structure
What is resonance structure?Resonance structures refer to different sets of Lewis structures that depict and explain the delocalization of electrons in a polyatomic ion or a molecule.
What are polyatomic molecules?Polyatomic molecules are molecules that are electrically neutral and have three or more atoms held together by covalent bonds. Examples are So3, Co3 and so on.
Therefore, The Co32- ion is a polyatomic molecule and have resonance structure.
Learn more about resonance structure here.
https://brainly.com/question/419650
The gas in a balloon occupies 2.25 L at 298 K and 300 kPa. At
what temperature will the balloon expand to 3.50L and 2.17 atm?
If a gas in a balloon occupies 2.25 L at 298 K and 300 kPa, the temperature at which the balloon expand to 3.50L and 2.17 atm is 345.23K.
How to calculate temperature?The temperature of an ideal gas can be calculated using the following formula:
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressureP2 = final pressureV1 = initial volumeV2 = final volumeT1 = initial temperatureT2 = final temperatureAccording to the information given in this question;
P1 = 300kpa = 2.96 atmP2 = 2.17 atmV1 = 2.25LV2 = 3.50LT1 = 298KT2 = ?2.96 × 2.25/298 = 2.17 × 3.5/T2
0.022T2 = 7.595
T2 = 7.595 ÷ 0.022
T2 = 345.23K
Therefore, if a gas in a balloon occupies 2.25 L at 298 K and 300 kPa. the temperature at which the balloon expand to 3.50L and 2.17 atm is 345.23K.
Learn more about temperature at: https://brainly.com/question/11464844
