under what conditions can an object be treated as a particle? (note that some quiz questions have multiple correct answer. the check box is square instead of round on these questions.) select one or more: a. object must be able to be treated as round b. forces on object must be concurrent c. object must not deform under the forces d. object must not change shape e. object must not be large f. object must not rotate

ow fast are we traveling around the galaxy, in km/hr ? express your answer in kilometers per hour to three significant figures.

We are located about 27,000 light-years from the galactic center and we orbit the center about once every 230 million years.  We are traveling at about 800,000 km/hr.

In this problem, they inform us of the rotation of the galaxy about its core; hence, if we assume that the galaxy was revolving in a circle, they inform us that the distance from the center is such that the circle's radius is 27,000 light years. 230 million years are needed for us to complete one full cycle. We must thus determine our current speed, which is equal to the circumference of this circle divided by the time it takes to complete the circle. Therefore, a circle's circumference is equal to two pi times its radius, which is 27,000 light years in this case.

Learn more about galaxy here:

https://brainly.com/question/2905713

#SPJ4

A) Speed of waves on the wire: 360 m/s. the wire is held rigidly at both ends and set into oscillation.

What is oscillation ?

Oscillation is a repeating back and forth movement between two points, or a continuous and regular alternation between two states. It is a type of periodic motion, which can either be regular or irregular, that is often seen in physical or biological systems.

In physics, oscillation is a type of motion that is repeated over and over again in the same pattern. Examples of oscillation include the swinging of a pendulum, the vibration of a tuning fork, and the wave-like motion of a spring. In biology, oscillation can refer to the cyclic changes in the activity of a living organism, such as the body temperature of a mammal, or the circadian rhythm of a plant. Oscillation is an important phenomenon in many areas of science, from engineering to economics.

To learn about more oscillation

https://brainly.com/question/12622728

#SPJ4

Have no affect on the period of the pendulum. This is because the equation does not include the mass, which means that the period of the pendulum is independent of the mass of the bob.

What is the pendulum ?

A pendulum is a weight suspended from a pivot so that it can swing freely. It is a device used to measure time, as the swing of the pendulum is regular and can be used to keep track of the passing of time. Pendulums are also used in clocks, swinging back and forth to mark the seconds and minutes. In addition to clocks, pendulums are also used in scientific experiments, such as determining the acceleration due to gravity. The length of the pendulum and the period of its swing are related, with a longer pendulum having a longer period. Pendulums can be used to measure the strength of a gravitational field, as the period of the pendulum is affected by the local strength of the gravity.

To learn more about pendulum

https://brainly.com/question/26449711

#SPJ4

The magnitude of the electric field along the long axis of the rod at a point 27.0 cm from its center is -4,444,444 N.

When charge is present in any form, each point in space has an electric field that is connected to it. The value of E, also known as the electric field strength, electric field intensity, or just the electric field, is used to express the size and direction of the electric field.

A charged rod's electric field can be calculated using the following formula:

E (electric field ) = k Q/[D (D + L)]

Where,

E is electric field

k is Coulomb’s constant = 9×10⁹ Nm²/c²

Q is  total charge = -20.0 µc = -20.0 × 10⁻⁶c

L is length of rod = 12.0 cm = 0.12 m

D is distance from the center = 27.0 – 12.0 cm = 0.15m

Substituting the values in the formula:

E = (9×10⁹ Nm²/c²) × (-20.0×10⁻⁶c) / [0.15m (0.15m + 0.12m)]

E = -4,444,444 N.

To know more about electric field visit:

https://brainly.com/question/4361782

#SPJ4

Complete question is" A rod 12.0 cm long is uniformly charged and has a total charge of -20.0 µc. determine the magnitude and direction of the electric field along the axis of the rod at a point 32.0 cm from its center".

The pressure at the bottom of a body of water is the weight of water per one-meter square area.

The force applied perpendicularly to an object's surface per unit area across which that force is dispersed is known as the pressure. The definition of it is force per unit area. It is usually more convenient to use pressure rather than force to describe the influences upon the behaviour of fluid. various units are used to express pressure.

In a column of fluid, pressure increases with depth as a result of the weight of the overlying fluid. As a result, the bottom of a fluid column suffers more pressure than the top, as does an object submerged in the column.

To know more about pressure:

https://brainly.com/question/1118467

#SPJ4

Option d is Correct. Since crests move away from the boundary quicker than they move up to the border, the sound wave speed will increase when the wave crosses the boundary into the ocean.

Several characteristics will alter as a sound wave moves from air to water. It causes the distance between crests (the wavelength) to grow. Due to some sound being reflected off the water's surface, the sound intensity in the water will be lower than it was in the air.

Since a crest moves away from the border every time a crest approaches the boundary, the frequency (number of crests passing each second) will remain constant.

Learn more about sound Visit : brainly.com/question/1199084

#SPJ4

Correct Question:

What happens to a sound wave as it travels from air into water? (a) Its intensity increases. (b) Its wavelength decreases. (c) Its frequency increases. (d) Its frequency remains the same. (e) Its velocity decreases.

d = 18sin(πt/2)

This equation models the horizontal distance of the pendulum from the center as a function of time.

What is pendulum?

A pendulum is a weight suspended from a pivot so that it can swing freely. Pendulums are often used to regulate time in clocks, as well as for scientific experiments to study gravity and other forces.

The pendulum swings 18 inches from right to left in 2 seconds, so we can use the equation d = 18sin(πt/2). To explain this, note that the pendulum takes 2 seconds to swing from right to left and back to right.

This means that it takes a total of 4 seconds for the pendulum to complete one period. Therefore, we can divide the time by 4 seconds to find the period.

This gives us πt/2. We then multiply this period by 18, the horizontal distance of the pendulum from the center, to get the equation d = 18sin(πt/2).

Therefore, d = 18sin(πt/2)

To learn kore about pendulum

Here: https://brainly.com/question/27187715

#SPJ4

Answer:

Explanation:

R-total (parallel) = 1/10 + 1/30 = 0.13 Ω

R-total (series) = 500 + 120 = 620 Ω

None of these the work done on the block by the spring.

Work is the quantity of energy that an external force transfers to an object when that force moves the object a predetermined distance.

Energy transferred to an object by work is measured as the work done on the object.

Work done on an object when it is subjected to a force that causes a change in position in the same direction as the force. Force applied to and displacement caused by an object are the two main parts of work done on it. In order for a force to exert work on an object, the object must be moved along the force's line of action.

Learn more about work done

https://brainly.com/question/13662169

#SPJ4

Full question:

A block of mass mmm is pushed up against a spring with spring constant kkk until the spring has been compressed a distance xxx from equilibrium. What is the work done on the block by the spring?

W=kx2

W=kx2

W=−kx2

W=−kx2

W=0

None of these.

sirius is a blue-white star with a surface temperature of about 9800 k. 2.0 solar mass is most likely the mass of sirius.

The amount if matter that makes up every object or body is the greatest way to understand mass. Everything that we can see has mass. Examples of objects with mass include a table, a desk, your bedroom, a football, weight glass, and even air.

Scientists frequently use balances to quantify mass. Using an electronic balance or a beam balance, one may directly determine the mass of solids. A liquid's mass can be calculated by measuring its volume and using the density table to determine the liquid's density. The kilogram is the SI measure of weight (Kg).

To learn more about mass visit:

https://brainly.com/question/19694949

#SPJ4

The gravity attraction force between the two is directly related to the product of respective weights and is inversely related to the square of their masses, according to Newton's Inverse Square Law.

A gravitational field is what?

Learn the vocabulary you need to speak with assurance. The region where gravity acts, such as the space surrounding a planet, is known as the gravitational field. Gravity and gravitational force are the same thing. The power that an item has because it is located in a position where gravity could effect it is known as gravitational potential energy.

Exists gravitation, or not?

Furthermore, although the influence of gravity is weaker as objects are moved away, its range is infinite. Sir Isaac Newton was the first to notice this force of attraction, and his discovery became known as Newton's law.

To know more about gravitation visit:

https://brainly.com/question/3009841

#SPJ4

Electric field is a physical field occupied by a charged particle on another particle in its surrounding. It is denoted by E. It is an invisible field.

a) Yes, an object with charge q experiences force from an electric field of intensity E. This force still acts even when the item is stationary because, as we can see, it is independent of the speed of the object.

b) No, the magnetic force produced by an object with charge q and speed v is equal to the magnetic force produced by an object with charge q and speed v in a magnetic field of intensity of B.

c) The electric force is still very strong. Point (a) shows that the electric force is still present and unaffected by the charge's speed.

d) The magnetic force F is no longer zero because the object is now moving at a specific speed v.

e) The answer is that the electric field does exert a force on the charges moving along the wire because it does so constantly to a charge.

f) Because a magnetic field always exerts a force on a moving charge, the charges flowing through the wire are being affected by the magnetic field. This is because the current in the wire is made up of charges travelling at a constant v.

g) Since an electric field exerts force and electrons have an electric charge, this argument makes sense. As a result, an electric charge and, by extension, an electron beam are always under the influence of an electric field.

h) The magnetic force is constant since the speed of the electrons in the beam is constant (v). V is not equal to zero, hence the magnetic field is not zero either.

As a result, an object with charge q experiences a force from an electric field of intensity E. This force still acts even when the item is stationary because, as we can see, it is independent of the speed of the object.

To know more about electric and magnetic fields:

https://brainly.com/question/9203526

#SPJ4

With a little additional arithmetic, we can determine that resistance of the filament at 100 watts is roughly 145 ohms using the formula R(Resistance)=E(Voltage)/I(Amps).

The bulb's power rating is 100 watt, and the rms voltage from across bulb is 220 volts, according to the query. So, to find the resistivity of the bulb, change P=100 watts with Vrms=220 watts in the formula P=V2rmsR. As a result, the bulb has a 484 ohm resistance.

The ratio of the electric current flowing through it to the voltage applied is the definition of electrical resistance for a component in the circuit or device: if there is consistent resistance over a broad range

To know more about resistance visit ;

https://brainly.com/question/29427458

#SPJ4

n of x and t in si units for a sinusoidal wave traveling along a rope in the negative x direction with the following characteristics: a58.00 cm, l5 80.0 cm, f5 3.00 hz, and y(0, t) 5 0 at t5 0. (b) what if? write the expression for y as a function of xand t for the wave in part (a) assuming y(x, 0) 5 0 at the point x5 10.0 cm.

for a - the expression is in the equation of y(x,t) = 58.00 cm * sin (2π (3.00 Hz (t-(-x/240 cm/s)) )) and for b the expression is y(x,t) = 58.00 cm * sin (2π (3.00 Hz (t- (-x/240 cm/s)) + (x/80cm)))

(a) For a sinusoidal wave traveling in the negative x direction with amplitude A = 58.00 cm, wavelength λ = 80.0 cm, frequency f = 3.00 Hz, and y(0, t) = 0 at t = 0, the expression for y as a function of x and t in SI units is given by: y(x,t) = A * sin (2π (f(t-x/v)) ). where v is the speed of the wave, which can be found using the relationship v = fλ. In this case, v = 3.00 Hz * 80.0 cm = 240.0 cm/s.Therefore, the equation becomes: y(x,t) = 58.00 cm * sin (2π (3.00 Hz (t-(-x/240 cm/s)) ))

(b) If y(x, 0) = 0 at the point x = 10.0 cm, then the phase of the wave is shifted by: Φ = 2π (x/λ). so the expression for y as a function of x and t becomes y(x,t) = 58.00 cm * sin (2π (3.00 Hz (t- (-x/240 cm/s)) + (x/80cm)))The wave is still traveling in the negative x direction, but the point x = 10.0 cm is now in phase with the rest of the wave, so it is no longer the starting point for the wave.

Learn more about wavelength here:

https://brainly.com/question/13533093

#SPJ4

what is its weight, in lbf, at a location where gravity is 32. 0 ft/s2?

The weight of the object in lbf at a location with gravity 32.0 ft/s2 is 320 lbf (10 lbm x 32.0 ft/s2).

Gravity is a natural phenomenon by which all objects with mass in the universe attract each other. It is the force that keeps us and all other objects on the Earth’s surface and is responsible for the movement of celestial bodies. Gravity is an invisible force that acts on every object in the universe, no matter how small or large. It is the force that gives objects their weight and keeps them in orbit around other objects, such as planets or stars. Gravity is one of the four fundamental forces of nature, along with the strong and weak nuclear forces, and electromagnetism.

The weight of an object is equal to its mass multiplied by the gravitational acceleration at the location.
Therefore, the weight of the object in lbf at a location with gravity 32.0 ft/s2 is 320 lbf (10 lbm x 32.0 ft/s2).

To learn more about gravity
https://brainly.com/question/28224994
#SPJ4

Ray tracing is a method used to determine the location and characteristics of the image created by a mirror.

To solve this problem, first draw a ray diagram to help visualize the situation. In this diagram, draw a line from the light bulb to the center of the mirror, which is the focal point. Then draw a ray that reflects off the mirror and back towards the focal point. This ray is called the principal ray.
Using the principal ray, you can draw a line that is parallel to the principal ray and intersects the focal point. This line will intersect the mirror at a point that is the same distance from the mirror as the light bulb is from the focal point. This is the location of the image.
To determine whether the image is upright or inverted, draw another ray from the light bulb, parallel to the principal ray. If this ray reflects off the mirror and intersects the focal point, then the image is upright, and if it reflects off the mirror and does not intersect the focal point, then the image is inverted. In this case, the image is inverted.
To determine if the image is real or virtual, draw a line from the image to the center of the mirror. If this line intersects the mirror, then the image is real, and if it does not intersect the mirror, then the image is virtual. In this case, the image is virtual.
To verify these results, you can calculate the location of the image using the mirror equation: 1/f = 1/d1 + 1/d2, where f is the focal length, d1 is the distance from the light bulb to the mirror, and d2 is the distance from the image to the mirror. Plugging in the values from this problem, we get 1/20 = 1/60 + 1/d2, which simplifies to d2 = 120 cm. This confirms that the image is 120 cm from the mirror, which is the same location as determined by ray tracing.

To learn more about mirror
https://brainly.com/question/27841226
#SPJ4

If it took 5.5 seconds for the sound of the lightning strike to reach the student, then the distance of the lightning strike from the student is 1886.5 meters.

To determine the distance from the student to the lightning strike, you would need to know the time it took for the sound of the strike to reach the student. The speed of sound in air is approximately 343 meters per second (m/s). By using the formula:

distance = speed x time

If it takes 5.5 seconds for the sound of the lightning strike to reach the student, then the distance of the lightning strike from the student is:

distance = 343 meters/second × 5.5 second

distance = 1886.5 meters

Therefore the distance is 1886.5 meters.

Also, keep in mind that the speed of sound varies with temperature, humidity, and pressure. So, if you want to get an accurate result, you'll need to take these factors into account as well. Furthermore, it's important to remember that sound travels in a straight line, so it's not always the same distance as the visual distance of the lightning strike.

To learn more about speed of sound visit: https://brainly.com/question/16012426

#SPJ4

Your question seems incomplete, but i assume the complete question was:

"Sound travels at 343m/s in the air. What distance from the student, in meters, is the lightning strike if it took 5.5 seconds for the sound of the lightning strike to reach the student?"

The coefficient of sliding friction between the block and the table top is 0.35. The force will be required to keep the block and brick moving at constant velocity is 21 N.

The coefficient of sliding friction (μ_s) is given by the ratio of the force of friction to the normal force.

For the wooden block on the table top:

Fs = μs * N

where

Fs = 14.0 N (force required to keep the block moving at constant velocity)

N = 40.0 N (normal force on the block)

So

μs = Fs / N = 14.0 N / 40.0 N = 0.35

When a 20.0 N brick is placed on top of the wooden block, the normal force on the block increases to 60.0 N (40.0 N + 20.0 N).

The force required to keep the block and brick moving at constant velocity can be calculated using the same formula as above:

Fs = μs * N

where

N = 60.0 N (new normal force)

so

Fs = μs * 60.0 N = 0.35 * 60.0 N = 21.0 N

Learn more about force here https://brainly.com/question/13191643

#SPJ4

The eye changing light waves into impulse and the ear changing sound waves into impulses are examples of transduction.

Transduction is the method of translation of arriving signal into a command transfer to the brain by a sensory receptor. It starts when stimulus changes the membrane potential of a receptor cell, which converts the signal energy in a stimulus and then into an electrical signal. Receptors are categorized into two main categories: exteroceptors, and interoceptors. Exteroceptors receive external sensory stimuli, and interoceptors receive internal sensory stimuli.

in visual system, cone and rods are the sensory cells that convert the physical light energy signal into electrical signal. In auditory system, hair cells transduced the sound vibrations into electrical signal and transfer them to the brain.

To know more about transduction, here

https://brainly.com/question/12974399

#SPJ4

Answer:

The electromotive force is the amount of energy given to each coulomb of charge. The potential difference is the amount of energy utilized by one coulomb of charge. The electromotive force is independent of the circuit's internal resistance. The potential difference is proportional to the circuit's resistance.

The distance from the point of collision to the center of mass of the stick and puck will depend on the mass of the stick and puck, and their relative positions at the time of collision.

The center of mass (COM) of an object is the point at which all of its mass is concentrated, and around which it rotates. The COM of two or more objects is the point at which the masses of the objects balance each other.

In the case of a collision between a stick and a puck, the COM of the two objects will be located at a point where the distance from the COM to the point of collision is proportional to the mass of the object. This means that if the stick and puck have different masses, the COM will be closer to the more massive object.

To know the exact distance of the center of mass from the point of collision, more information is needed like mass and the relative positions of both objects before the collision.

To learn more about center of mass visit: https://brainly.com/question/28021242

#SPJ4

The net force acting on the object weighing 3.58 kg accelerating 1.52 m/s² will be 5.44 N. The applied force to overcome the frictional force of 17.9 N is then 23.34 N.

Friction is a kind of force that resist motion of an object. It is an opposing force so that it always be negative. The net force acting on an object decreases from the applied force due to friction.

Force is the product of mass and acceleration of the moving object.

Given mass  = 3.58 kg

acceleration =  1.52 m/s²

net force = 3.58 kg  × 1. 52 /m/s² = 5.44 N.

The net force is  applied force - frictional force

then, applied force =  5.44 N + 17.9 N = 23.34 N.

Therefore, the applied force on the object is 23.34 N.

Find more on friction :

https://brainly.com/question/13000653

#SPJ1

The end of the a thin rod with a length of 0.452 m and very little mass is moving up the plane at an acceleration of 0.80 m/s2 whereas the rod is horizontal.

The speed of an object in rotation is known as its angular speed. In radians, the distance traveled is denoted by the symbol. The amount of time is expressed in seconds. As a result, the angular speed is expressed in radians per second, or rad/s.

A scalar measurement of the rotating item is its angular speed. A vector representation of the rotational motion is the angular velocity. Only the magnitude of an angle's speed is specified. The magnitude and direction are both specified by angular velocity.

To know more about acceleration visit :

https://brainly.com/question/12550364

#SPJ4

Answer:

Explanation:

The amount of energy needed to apply a force of 1 newton over a distance of 1 meter is also called a joule. The joule (symbol: J) is the SI derived unit of energy. It is the energy transferred to an object when a force of one newton acts on that object in the direction of its motion through a distance of one meter. It is also the amount of energy required to heat 1 gram of water by 1 degree Celsius.

Answer:

One way to distinguish between samples of metal and nonmetal with the help of a hammer is by conducting a simple test called the "ring test." This test involves striking the sample with the hammer and listening for the sound it makes. Metals typically produce a clear, ringing sound when struck, while nonmetals produce a dull, thudding sound. Additionally, you can use a magnet to test if the sample is metal or not. If the sample is attracted to the magnet, it's likely to be a metal, if not it's likely to be a nonmetal.

The net torque on the pulley about the axle would be -0.20 Nm.

Torque is defined as a twisting or turning force that causes rotation around an axis, which can be a centre of mass or a fixed point. Torque can also be defined as a rotating object's ability to overcome turning resistance, such as a gear or a shaft.

In most cases, it is expressed in pounds per foot or newtons per metre. Torque is frequently confused with work, which is defined as force applied across a distance. Torsion (twisting) is, however, an essential component of the definition of torque.

Torque and work are both mechanical expressions of energy. Torque is a force that allows cars to smoke brake burns and accelerate quickly from a slow speed.

The net torque on the pulley well about axle is the torque due to the 30 N force plus the torque due to 20 N force:

T=(30 N)r₁ sinθ₁+(20 N)r₂ sinθ₂

= (30 N)(0.02 m)sin(-90°)+(20 N) (0.02 m)sin(90°)

=(-0.60Nm)+(0.40 Nm)

=-0.20 N m

Thus, The net torque on the pulley about the axle would be -0.20 Nm.

Learn more about torque

https://brainly.com/question/6855614

#SPJ4

The block is moving at the speed of 5.61 m/sec at the instant the spring has been compressed 15 cm. If the mass possessed by the block is 10 kg.

Let the mass of the block, m = 10 kg

Speed of the block before touching the spring, v = 6.0 m/s

Let the speed of the block after compressing the spring = V

k = 2.0 KN/m

By the law of conservation of energy,

0.5mv² = 0.5kx² + 0.5mV²

10 × 6² = 2000 × 0.15² + 10 × V²

V² = (10 × 6² - 2000 × 0.15²)/10

V² = 31.5

V = 5.61 m/s

To know more about spring, here

https://brainly.com/question/14670501

#SPJ4

b.) The core would heat up, fusion rates would increase, the core would re-expand.

What is fusion?

Fusion is the process by which atomic nuclei come together to form a heavier nucleus, releasing large amounts of energy in the process. This is the process that powers the sun and other stars. The most common fusion reaction in the sun is the fusion of hydrogen nuclei to form helium. This reaction takes place in the sun's core, where the temperature is about 15 million degrees Celsius and the pressure is about 340 billion times Earth's atmospheric pressure.

If the sun's core suddenly shrank, the pressure and temperature inside the core would increase. This would cause the fusion rates of hydrogen nuclei to increase, releasing more energy and causing the core to heat up. The increased heat would cause the core to re-expand, as the increased energy would push against the outer layers of the core. The increase of fusion rates would also result in more helium being produced, which would cause the core to shrink again, but this is a slower process than the initial shrinkage.

Hence, if the core shrank a bit fusion rates would increase, the core would re-expand.

To learn more about fusion from the given link:

https://brainly.com/question/17870368

#SPJ4

the proportion of heat produced by the hotter item to that by the cooler one

What connection exists between the change in temperature and the transfer of heat?

temperature object. For a gas, a shift in temperature and heat transfer are connected. Heat emitted = Stefan's constant T4 if the two bodies are separate.

We now know that the ratio of heat released to a ratio of degrees will be 4.Heat(hotter): Heat: 600:300 = 16:1 Cooler: 300:600

In water, how does heat transfer happen?

Heat is transferred by a fluid, including water or air, by convection. As the fluid (gas) flows from one place to another, it also transfers heat. A current is the term used to describe the movement of warm water or air.

To know more temperature  about visit : https://brainly.com/question/21031825

SPJ4

Length in feet and inches:: 378 feet 6 inches

Width in feet and inches: : 279 feet 2 inches

Dimensions are the measurement of something's size, such as length, width, and height. Dimensions can be used to describe the overall size of an object, or more specifically, its components.

They can also be used to quantify the area or volume of an object. Dimensions are usually expressed in metric units such as centimeters, meters, or millimeters, although imperial units are also used.

Calculation:

Length: 115 m x 3.28 ft/m = 378.8 ft ≈ 378 ft 6 inches

Width: 85 m x 3.28 ft/m = 279.2 ft ≈ 279 ft 2 inches

To learn more about dimensions

Here: https://brainly.com/question/20759684

#SPJ4