A polynomial with zero coefficients is one that has all of its components equal to zero. In other words, the degree of a zero polynomial seems to be either undefined or set to -1.
What does the 0 in a polynomial mean?
The zeros of a polynomial, p(x), are all x-values that make it equal to zero. They intrigue us for a number of reasons, such as the fact of they reveal the polynomial's x-intercepts on the graph. We will also see that they are related to a polynomial's factors.
What exactly is a quadratic of degree zero?
When all of the factors in a polynomial have degrees of 0, it is said to have zero degrees. Examples include 6 x 0 & 9 a 0.Therefore, any number is an usually negligible polynomial, whether it is positive or negative.
To know more about degree polynomial solution visit:
brainly.com/question/29775881
#SPJ4
Complete question
Is there a way, given a set of values (x,f(x)), to find the polynomial of a given degree that best fits the data?
I know polynomial interpolation, which is for finding a polynomial of degree n given n+1 data points, but here there are a large number of values and we want to find a low-degree polynomial (find best linear fit, best quadratic, best cubic, etc.). It might be related to least squares...
More generally, I would like to know the answer when we have a multivariate function -- points like (x,y,f(x,y)), say -- and want to find the best polynomial (p(x,y)) of a given degree in the variables. (Specifically a polynomial, not splines or Fourier series.)
Both theory and code/libraries (preferably in Python, but any language is okay) would be useful.
A digital component defines an output voltage between 0 and 0.8V as a logic-0, and an output voltage between 2V and 5V as a logic. These voltages are its ___________/?
A digital component defines an output voltage between 0 and 0.8V as a logic-0 and an output voltage between 2V and 5V as logic. These voltages are its Logic Level.
For a signal to exist or to be considered a signal it should be at a certain logic level. Mostly used states are ON or OFF. An 'on' refers to a binary 1, and an 'off' refers to a binary 0 when expressed in binary. These signals are referred to as "high" or "low", respectively
Binary logic is used by digital devices to store, analyse, and transmit data and information. In binary logic, a condition is either "on" or "off".
The manufacturers mentions the logic level voltage of each device in the manual provided with it.
To learn more about Voltage
brainly.com/question/2364325
#SPJ4
For each of the cases described below, draw the total acceleration vector, the radial acceleration vector, and the tangential acceleration vector.
A car is accelerating from 55 km/h to 70 km/h as it rounds a curve of constant radius... Draw the vectors sstarting at the black dot. The location and orientation of the vectors will be graded. The length of the vectors will not be graded.
A car is going a constant 65 km/h as it rounds a curve of a constant radius... Draw the vectors starting at the black dot. The location and orientation of the vectors will be graded. The length of the vectors will not be graded.
A car slows down while rounding a curve of constant radius... Draw the vectors starting at the black dot. The location and orientation of the vectors will be graded. The length of the vectors will not be graded.
The circle's center is where the acceleration is pointed radially.
What is acceleration?The square of the body's speed along the wind divided by the radius (r) from the circle's center to the moving body gives rise to the centripetal acceleration, or a(centripetal), whose magnitude is equal to that.The total acceleration vector, the radial acceleration vector, and the tangential acceleration vector.v 2/r = a(centripetal).The equation for tangential acceleration is a(tangential) = r, where r is the circle's compass and is the angular acceleration. It comes from the fact that the bow length is equal to the circle's compass times the angle in radians.The circle's center is where the acceleration is pointed radially.To learn more about acceleration refer to:
https://brainly.com/question/30257873
#SPJ4
the 500 kg engine is suspenderd from the crane boom in fig determine the resultant internal loadings acting on the cross section of the boom at point e
The resultant internal loadings acting on the cross section of the boom at point E is -2.54kN·m, force equilibrium equations.
What is equilibrium?The notion of equilibrium or balance is a very fundamental concept when dealing with forces. An object can typically be affected by multiple forces at once. A force is a vector quantity, meaning it has both a magnitude (size) and a direction.
There is no net force acting on an object and it is said to be in equilibrium if the size and direction of the forces acting on it are exactly balanced. The first law of motion states that an object at rest will remain at rest and an object in motion will remain in motion because there is no net force acting on an object in equilibrium.
We will consider segment AE of the boom, so we must first determine the pin reactions at A. Notice that member CD is a two-force member. The free-body diagram of the boom is shown in Fig. 1–5 b . Applying the equations of equilibrium,
[tex]$$\begin{gathered}\circlearrowleft+\Sigma M_A=0 ; \quad F_{C D}\left(\frac{3}{5}\right)(2 \mathrm{~m})-[500(9.81) \mathrm{N}](3 \mathrm{~m})=0 \\F_{C D}=12262.5 \mathrm{~N} \\+\Sigma F_x=0 ; \quad A_x-(12262.5 \mathrm{~N})\left(\frac{4}{5}\right)=0 \\A_x=9810 \mathrm{~N} \\+\uparrow \Sigma F_y=0 ; \quad-A_y+(12262.5 \mathrm{~N})\left(\frac{3}{5}\right)-500(9.81) \mathrm{N}=0 \\A_y=2452.5 \mathrm{~N}\end{gathered}[/tex]
The free-body diagram of segment A E is shown in Fig. 1-5 c.
Equations of Equilibrium
[tex]$$\begin{array}{ll}\rightarrow \Sigma F_x=0 ; & N_E+9810 \mathrm{~N}=0 \\& N_E=-9810 \mathrm{~N}=-9.81 \mathrm{kN} \\+\uparrow \Sigma F_y=0 ; & -V_E-2452.5 \mathrm{~N}=0 \\& V_E=-2452.5 \mathrm{~N}=-2.45 \mathrm{kN}\end{array}$$$$\begin{aligned}\circlearrowleft+\Sigma M_E=0 ; & M_E+(2452.5 \mathrm{~N})(1 \mathrm{~m})=0 \\& M_E=-2452.5 \mathrm{~N} \cdot \mathrm{m}=-2.45 \mathrm{kN} \cdot \mathrm{m}\end{aligned}$$[/tex]
Thus, The resultant internal loadings acting on the cross section of the boom at point E is -2.54kN·m.
To know more about equilibrium click-
brainly.com/question/517289
#SPJ4
Full question:
The 500-kg engine is suspended from the crane boom in Fig. 1–5 a . Determine the resultant internal loadings acting on the cross section of the boom at point E .
Consider the proposition below.
The composition of ocean water has
remained constant for thousands of
years.
If the following statements are true,
which one provides the most support for
this proposition?
A Salt deposits that were formed
thousands of years ago by the
evaporation of ocean water have the
same composition as salt deposits
formed today.
B The composition of salt deposits formed
by the evaporation of ocean water is
similar everywhere in the world.
C The shells of marine animals that
lived thousands of years ago have
the same composition as the shells of
marine animals that live today.
D The types of marine animals living
in different parts of the world have
stayed the same for thousands of years.
Answer:
A Salt deposits that were formed thousands of years ago by the evaporation of ocean water have the same composition as salt deposits formed today would provide the most support for the proposition that the composition of ocean water has remained constant for thousands of years. This statement directly supports the idea that the composition of ocean water has not changed over time, as the salt deposits that were formed in the past have the same composition as those formed today. The other statements provide supporting evidence but not as strong as statement A.
which system element converts a sensor's minute actions into a usable indication or signal? select the best answer transducer transmitter indicator rotameter
Transducer element converts a sensor's minute actions into a usable indication or signal.
A transducer which is known as thermocouple, is able to sense changes in temperature and it produce the output voltages representative of those changes. A lot of the sensors which is used in HVACR are also transducers since they generate the electrical signal while monitoring another signal as input.
The circuit which is to be measured and the ammeters must be linked in series and it measures the current. The entire circuit where current can pass through an ammeter at relatively low currents (up to a few amperes).
Power readings are taken with a power meter. The potential difference between two locations in a circuit is measured using a voltmeter.
Learn more about transducers:
brainly.com/question/13103015
#SPJ4
students want to use the setup above to make measurements that will allow them to determine the charge-to-mass ratio q/m of the particles using a best-fit line to a linear graph. i. describe a procedure the students could use, including what quantities are varied and what measurements are recorded. also include any steps to reduce experimental uncertainty.
A procedure the students could use to determine the charge-to-mass ratio of the particles includes the following steps:
1.Obtain a sample of the particles of interest.
2.Set up a parallel plate electrostatic apparatus with a known voltage difference across the plates.
3.Measure the distance between the plates and the electric field strength between the plates.
4.Introduce the sample of particles between the plates, and use a detector to measure the current that flows between the plates.
5.Vary the voltage difference across the plates and record the corresponding current for each voltage.
6.Plot a graph of current versus voltage. The slope of this graph represents the charge-to-mass ratio of the particles.
7.To reduce experimental uncertainty, the students should use a high-precision voltmeter to measure the voltage and a high-precision ammeter to measure the current. They should also take multiple measurements at each voltage and take the average. They should also use a large number of particles to get a more accurate result.
8.Also, the students should ensure that the electrodes are clean, and the electric field is uniform across the gap, as any non-uniformity would affect the results.
9.They should also try to minimize the environmental effects such as temperature and humidity, which could affect the results.
10.Finally, repeat the experiment multiple times and take the average of the results to get the most accurate value of charge-to-mass ratio of the particles.
Learn more about charge-to-mass ratio at : https://brainly.com/question/11927241
#SPJ4
the correct, general definitions of velocity and acceleration, in terms of position vector ~r, are ~v
Velocity is a vector quantity that describes an object's change in position over time. The general definition of velocity is the derivative of the position vector ~r with respect to time, denoted as v = dr/dt. This means that velocity is the rate of change of position with respect to time. It is also a measure of how fast an object is moving in a particular direction.
Acceleration is another vector quantity that describes an object's change in velocity over time. The general definition of acceleration is the derivative of the velocity vector ~v with respect to time,
denoted as a = dv/dt. This means that acceleration is the rate of change of velocity with respect to time. It is also a measure of how quickly an object's velocity is changing.
In summary, velocity is a measure of how fast an object is moving in a particular direction, while the acceleration is a measure of how quickly an object's velocity is changing. Both are vector quantities and can be described in terms of position vector ~r.
Read more about Kinematics:
https://brainly.com/question/26407594
#SPJ4
An electron is placed between two charged parallel plates asshown. Which 2 of the following statements are true?
I. The electrostatic force is greater at A than B
II. The work done from A to B to C is the same as the workdone from A to C
III. The electrostatic force is the same at points A andC
IV. The electric field strength decreases as the elctron isrepelled upward
An electron is placed between two charged parallel plates asshown. The statements III and IV are True.
What are electrostatic forces?
The electrostatic force is greater at A than B is False. Since the plates are charged parallel, the electrostatic force is the same at both points A and B.The work done from A to B to C is the same as the work done from A to C is False.The work done from A to B to C is the work done to move the electron from point A to point B, and then from point B to point C. The work done from A to C is the work done to move the electron from point A to point C, which is the sum of the work done from A to B to C. The work done from A to B to C is not the same as the work done from A to C.The electrostatic force is the same at points A and C is True. Since the plates are charged parallel, the electrostatic force is the same at both points A and C.The electric field strength decreases as the electron is repelled upward is True. The electric field strength decreases as the electron is moved upward and farther away from the negative plate.To sum up, statement I and II are false and statement III and IV are true.
To learn more about electrostatic force refer:
brainly.com/question/20797960
#SPJ4
when you drive to work on a winding road, the odometer of your car changes from 27123 km to 27134 km.
The distance traveled by car is exactly equal to the 11 km, so option B is correct, and the displacement traveled by car is less than 11 km, so option A is correct.
What do you mean by displacement?It is defined as the difference in position of an object from its initial position to its final position. The displacement vector points from the initial position to the final position, and its magnitude is equal to the distance between the two positions.
For example, if an object is moving in a straight line, its displacement can be described as the change in its position along that line. The unit of displacement is typically meters (m) or kilometers (km).
In addition, displacement is a scalar quantity in that it has only magnitude, it does not have a direction.
Given information:
The odometer's initial readout is [tex]d_i[/tex] = 27123 kilometres
The odometer's final readout is: [tex]d_f[/tex] = 27134 kilometers
Step (1)
An odometer is a device that is mounted to the dashboard of an automobile to track the miles driven.
The longest path the car has taken is the distance.
The following statement describes how far the car traveled on the winding road:
D = [tex]d_f -d_i[/tex]
Change the value in the equation above.
D= 27134km-27123km
D= 11km
As a result, the distance driven by car is exactly 11 kilometers.
Thus, choice (B) is the right one.
Step (2)
The distance between the final point and the starting point is measured as displacement. Displacement is never greater than the distance or equal to it. The displacement's expression is given as
SD
S(df-di)
Change the value in the equation above.
S<( 27134km-27123km)
S<11km
The displacement driven by car is therefore less than 11 kilometers.
Thus, choice (A) is the right one.
Learn more about displacement
brainly.com/question/10919017
#SPJ4
The complete question is:
When you drive to work on a winding road, the odometer of your car changes from 27123 km to 27134 km.
1) The distance your car traveled is ________.
A. less than 11 km B. exactly 11 km
C. greater than 11 km
2) The magnitude of your car's displacement is ________.
A. less than 11 km B. exactly 11 km
C. greater than 11 km
You are on the roof of the physics building, 46.0 m above the ground. Your physics professor, who is 1.80 tall, is walking along side the building at a constant speed of 1.20 m/s. If you wish to drop an egg on your professor's head, how far from the building should the professor be when you release the egg? Assume that the egg is in free fall.Take the free fall acceleration to be 9.80 m/s^2
The physics professor should be 3.60m far from the physics building for the egg to successfully fall on professor's head, assuming freefall motion of the egg and acceleration to be 9.80 m/s^2.
The height of the building = 46 m
The height of the professor = 1.80 m
The effective height for freefall of the egg = 46.00 - 1.80 = 44.2 m
As S = ug + 1/2a[tex]t^{2}[/tex]
44.2 = 0 + 1/2 × [tex]t^{2}[/tex] × 9.8
[tex]t^{2}[/tex] = (2 × 44.2) / 9.8
[tex]t^{2}[/tex] = [tex]\sqrt{9.02}[/tex]
[tex]t[/tex] = 3.003 s
Let the distance travelled by the professor be x
The time taken by the egg to fall is equal to the time taken by the professor to reach the building through distance x
Speed with which the professor is walking = 1.20 m/s
Now as Distance = Speed × Time,
x = 1.20 × 3.003
x = 3.6036 meters.
Learn more about freefall here:
https://brainly.com/question/17067422
#SPJ4
What is an Aerobic Exercise?
Responses
An exercise that makes your body use a large amount of oxygen over a long period of time
An exercise that makes your body use a large amount of oxygen over a long period of time
The ability to move and change directions
The ability to move and change directions
The ability to use your body parts and senses together
The ability to use your body parts and senses together
Ability to move and bed your body easily
An exercise that makes your body use a large amount of oxygen over a long period of time is an aerobic exercise.
What is aerobic exercise?The word "aerobic" literally means "with oxygen," meaning that the amount of oxygen that can reach the muscles to support their ability to burn fuel and move depends on how much air is breathed in. The cardiovascular system is strengthened by aerobic exercise. A great way to lose weight is through aerobic activity. Along with helping you lose weight, these exercises also improve your muscles' stamina.
Furthermore, aerobic exercise is the most effective strategy to shed extra fat since it increases the amount of oxygen that your body receives. A warm-up and cool-down should be done before and after every aerobic activity session. Individual exercise tolerance should be the foundation for advancing to higher intensities of exercise. The intensity should also be increased very gradually.
To learn more about aerobic exercise, visit:
https://brainly.com/question/28513883
#SPJ1
A rocket accelerates from rest at a rate of 66 m/s2. (a) What is its speed after it accelerates for 27 s?
a 56.5 kg skateboarder starts out with a speed of 1.75 m s he does 80.0 j of work on himself by pushing with his feet against the ground in addition friction does 265 j of work on him in both cases the forces doing the work are non conservative the final speed of the skateboarder is 6.00 m s. (a) Calculate the change (ΔPE = PEf-PE0) in the gravitational potential energy. (b) How much has the vertical height of the skater changed?
(c) Is the skater above or below the starting point?
a)The gravitational potential energy has changed by 1536.92 joules.
b) The skateboarder's vertical height fluctuated by 2.919 meters.
How to apply the law of conservation of energy and the law of work?Energy to a skateboarder (a) - 1620.8J
The skateboarder's initial kinetic energy is given by K i = 1/2 * mu 2 = 1/2 * (56.5kg) * (2.44m/s) 2 = 165.5J, whereas his final kinetic energy is given by K f = 1/2 * m * v 2 = 1/2 * (56.5kg) * (7.24m/s) 2 = 1457.2J, where v is his final speed.
The kinetic energy shift is therefore Delta*K = K f - K i = 1457.2J - 166.5.J = 1290.6J.
The change in the skateboarder's mechanical energy (kinetic plus potential) is equal to the work done on
it: W = 80.0J is the effort the skateboarder did on himself, therefore Delta*K + Delta*E p = W + W f
The amount of work done by friction is W f = 265J.
The shift in gravitational potential energy is represented by the formula Delta*E p =E pf -E pi.
Delta*K = 80.0J - 265J - 1457.2J = - 1620.8J, where Delta*E p = W + W f - Delta*K.
(b) 2.97 m
The skateboarder's shift in potential energy may be expressed mathematically as Delta*E p = mg*Delta*h.
where g = 9.8m / (s 2) is the acceleration of gravity and m = 56.5 kg is the mass.
The skateboarder's change in vertical height is measured by delta*h.
Delta*h is calculated as (Delta*E p)/(mg) = (- 1620.8J)/((56.5kg)(9.8m / (s 2))) = - 2.99m.
Where the skateboarder has descended as indicated by the negative symbol. Because we are only concerned with the absolute value, the solution is h = 2.99m.
To learn more about gravitational potential energy refer to:
https://brainly.com/question/12902132
#SPJ4
estion 7 of 12
Macmillan Learning
A fox locates rodents under the snow by the slight sounds they make. The fox then leaps straight into the air and burrows its
nose into the snow to catch its meal. If a fox jumps up to a height of 91 cm, calculate the speed at which the fox leaves the snow
and the amount of time the fox is in the air. Ignore air resistance.
The fox spends 0.91 seconds in the air after leaving the snow at a speed of 3.84 m/s.
which the fox leaves the snow and the amount of time the fox is in the air?h = 91 cm = 0.91 m is provided.
Locate: vi, t
We may apply the formulae v = vi - 9.81 t and y = vi t - 4.905 t2.
There is a further fact that we are aware of. The fox has zero velocity at height h, the highest point of the jump:
0.91 = vi tp - 4.905 tp2 where 0 = vi - 9.81 tp
There are now two equations and two unknowns remaining. The starting velocity, vi, may be solved for.
vi = 9.81 tp - 4.905 tp2 - 9.81 tp2 - 4.905 tp2 tp = 0.391 seconds
vi=9.81 tp=3.84 m/s.
That is one response. Applying the second equation once more:
t = 3.84 t - 4.905 t2 0 = t = y = vi t - 4.905 t2 0 (3.84 - 4.905 t)
t = 0, 0.91 s
The fox spends 0.91 seconds in the air after leaving the snow at a speed of 3.84 m/s.
To learn more about speed refer to:
https://brainly.com/question/5176575
#SPJ1
Match the following data collection methods with its definition by filling in the blank with the letter of the definition.
Definitions
A. This method observes subjects with little interference in their "natural habitat".
B. This method is an intensive study of a person or a group.
C. This method uses questionnaires and interviews to collect information about people's attitudes, beliefs, feelings, behaviors, and lifestyles.
Case Studies
HELP ME!
The answers include the following:
A. This method observes subjects with little interference in their "natural habitat" - Naturalistic observation.
B. This method is an intensive study of a person or a group - Case study.
C. This method uses questionnaires and interviews to collect information about people's attitudes, beliefs, feelings, behaviors, and lifestyles - Survey.
What is Observation?Thus us referred to as the active acquisition of information from a primary source and involves the use of our senses.
Naturalistic observation is a type which involves observing subjects with little or no interference in their "natural habitat" which was why it was chosen as the correct choice,
Read more about Observation here https://brainly.com/question/13303856
#SPJ1
4.evil space aliens drop you and your fellow astronomy student 1 km apart out in space, very far from any star or planet. discuss the effects of gravity on each of you.
Both of us would be attracted towards each other due to the force of gravity with a specific magnitude of 2.4 x 10^-13 N-that number is calculated using the formula for gravitational force and inputting 1KM for r^2.
What is gravitational force?Gravitation or just gravity is the force of attraction between any two bodies. All the objects in the universe attract each other with a certain amount of force, but in most of the cases, the force is too weak to be observed due to the very large distance of separation. Besides, gravity’s range is infinite, but the effect becomes weaker as objects move away.This force of attraction was first observed by Sir Isaac Newton and was presented as Newton’s law of gravitation in the year 1680. However, gravitation can generally exist in two main instances.Gravitation may be the attraction of objects by the earth.To learn more about gravitational force refer to:
https://brainly.com/question/27943482
#SPJ1
Consider the falling object of mass 10 kg in Example 2,but assume now that the drag force is proportional to the square of the velocity.(a) If the limiting velocity is 49 m/s, show that the equation of motion can be written as dv/dt=[(49)2−v2]/245.Also see Problem 25 of Section 1.1.(b) Ifv(0)=0, find an expression for v(t )at any time.(c) Plot your solution from part (b) and the solution (26) from Example 2 on the same axes.(d) Based on your plots in part (c), compare the effect of a quadratic drag force with that of a linear drag force.(e) Find the distance x(t)that the object falls in time t.(f) Find the time T it takes the object to fall 300 m.
G = -9.81 m/s2 is the gravitational acceleration close to the earth. Simply multiply the acceleration of gravity by the length of time since anything was released to determine its speed (or velocity) after that period of time. Velocity is calculated as follows: V = gt = -9.81 m/s2 * time.
How do you find the velocity of an object falling down?Because of the gravitational attraction of the earth, an object falls faster as it descends. In close proximity to the earth, gravity accelerates at a rate of g = -9.81 m/s2. The acceleration of gravity is simply multiplied by the period of time since the object was released to determine the speed (or velocity) of the object. V = gt is the result of velocity being equal to -9.81 m/s2 * time. Just that the thing is traveling downwards is shown by the negative sign. It would be climbing the ladder if it were positive. Simply omit the negative sign if referring to velocity rather than speed.If you tossed the ball up or down rather than just letting go, you would have an initial velocity, thus you would also need to factor that into the calculation, giving you: Vo is the object's initial speed, and V equals Vo plus gt. The only difference is that this equation will only give you the up-down velocity, not the total velocity, if you tossed the ball to the side rather than straight up or down. The object's initial up-down velocity remains the value you should use for Vo.To Learn more About gravitational acceleration refer to:
https://brainly.com/question/14374981
#SPJ4
which of the following statements regarding Haig's theory of in utero parent-offspring interaction is true?
Hormones produced by the placenta manipulate the in-utero environment in ways that benefit the fetus at a cost to the mother is true.
What does physics theory mean?
A well-supported theory considers facts, rules, and hypotheses to explain a natural phenomenon. The gravitational field hypothesis, for example, explains both apples falling from bushes and astronauts floating in space.
Is an opinion a fact?
You can never demonstrate a theory. It provides an analysis of several different facts. Until it is disproven, a well-supported, fact-based hypothesis is accepted. It will never come to pass, and that is a fact.
To know more about offspring visit:
https://brainly.com/question/471576
#SPJ4
Which of the following statements regarding Haig’s theory of in-utero parent-offspring conflict is true?
a. Maternal genes should be selected to transfer as many nutrients to the fetus as requires
.b. Fetal-derived cells cannot invade the maternal endometrium during implantation.
c. Hormones produced by the placenta manipulate the in-utero environment in ways that benefit the fetus at a cost to the mother.
d. Selection will not favor maternal genes that code for resisting the invasion of the endometrium y fetal-derived tissues.
e. Fetal genes should he selected to respect the maternal optimum for nutrient transfer topreserve the mother’s future reproductive success.
under normal conditions, with good brakes, you can bring a car to a controlled stop from 50 m.p.h. in approximately:
Total stopping distance is more complicated than how quickly your car stops after you press the brakes.You have a minimum 268 foot total stopping distance at 50 mph.
How far will it take a car with decent brakes traveling at 50 mph to stop completely on dry pavement? The length of time it takes for your car to stop once you apply the brakes is not the same as the total stopping distance.You have a minimum 268 foot total stopping distance at 50 mph.55 Feet for Perception are included in the total of 268 feet.In the best case scenario, the braking distance is the maximum distance your car will go.It may take around 158 feet at 50 mph on dry pavement with decent brakes.It will take roughly 6 seconds to stop your car if you are moving at 55 mph.Prior to coming to a stop, the vehicle will have traveled around 302 feet.A football field's length is greater than that.To learn more about stopping distance refer
https://brainly.com/question/24020960
#SPJ4
which of the following are correct pairings when considering physical quantities and si units used in physics?\
The SI unit for length is the meter, The correct abbreviation for kelvins is K.
What are the SI units and physical quantities?S.I. Unit SymbolDistance (l) in meters.kilograms (kg) of mass (M).Minute (M) Second (s).Amperes of electric current (I). A.Temperature thermodynamic () Kelvin. K.Size of the material (N) It's mole.Temperature-kelvin is the proper pairing of a physical quantity and a SI unit.The length, mass, time, electric current, temperature, quantity of a substance, and luminous intensity are the seven fundamental physical units that make up the International System of Units (SI), which is used to express all physical values.Pressure and force do not share a single SI unit.The newton is the SI unit of force (N). The pascal is the pressure unit in SI (Pa).To learn more about SI unit refer to:
https://brainly.com/question/24119811
#SPJ4
For each of the situations given, state whether frictional forces do positive, negative, or zero work on the italicized object.
A person exerts a horizontal force on a banana at rest on a counter top. The banana remains at rest.
a. positive
b. negative
c. zero
A person exerts a horizontal force on a banana at rest on a counter top. The banana remains at rest is zero.
What do you mean by frictional forces?When two surfaces come into contact with one another, frictional force acts to move them either in the same direction or in the opposite way. Since friction is a force that opposes or resists an object's ability to glide against another when they come into contact. As a result, the force of friction is a contact force. A force called friction always works against motion. The texture of the surfaces of the items that made contact with each other and the amount of force applied to them both have a significant impact on the frictional forces. Rolling, sliding, static, and kinetic friction are the four main categories under which frictional forces are categorised. Fluid friction is yet another significant type of friction.
Frictional forces exist between the banana and the countertop. These forces resist the motion of the banana, and it remains at rest because the force applied to it is not enough to overcome the force of friction. In this scenario, the frictional force does zero work on the banana because the banana does not move, and work is defined as force applied over a distance.
The force exerted by the person is equal and opposite to the force of friction, so the net force on the banana is zero, and no work is done on the banana.
To know more about force visit:
https://brainly.com/question/28875770
#SPJ4
which way and by what angle does the accelerometer in (figure 1) deflect under the following conditions?
This law can be expressed as follows: force (F) equals mass (m) times acceleration (a); F = m * a.
Calculate the object's acceleration in terms of the angle the string makes with the vertical ?
It is a frame of reference problem that requires us to exert a pseudo-force on the item.
If an object is accelerating, such as a car, the pendulum's motion must be measured in relation to the accelerating car.
On the pendulum, a pseudoforce equal to ma will be applied in the direction that the automobile is accelerating against.
Here, the pendulum's mass is m, and the car's acceleration is a.If T is the string's tension and it forms an angle of with the vertical,
T sin = mg
Ma = tsin
tanθ = a/g
θ = tan⁻¹ (a/g)
To learn more about acceleration refer
https://brainly.com/question/16269581
#SPJ4
A force pushes the cart for 1 s, starting from rest. To achieve the same final speed with a force half as big, the force would need to push for how long? A) 1/4 s B) 1/2 s C) 1 s D) 2 s E) 4 s
To achieve the same final speed with a force half as big, the force would need to push for 2 seconds.
What is importance of motion in force?The importance of forces and motion cannot be overstated. Movement and inertia are caused by lives, forces, and motion. Motion is merely movement; it requires an external force to be applied. Forces that can speed up or slow down motion include pushing and pulling.
We know that Newton's Second law of motion states that
[tex]$F = ma = m\frac{v_f-v_o}{t}[/tex]
As here it starts from rest so,
[tex]$F = ma = m\frac{v_f}{t}[/tex]
So for both cases:
[tex]$F_1 = m\frac{v_f}{t_1}[/tex]
[tex]$F_2 = m\frac{v_f}{t_2}[/tex]
This gives us
[tex]$\frac{F_2}{F_1}=\frac{t_1}{t_2}[/tex]
Given that
F₂ = F₁/2
Therefore,
t₂ = 2t₁ = 2s
Thus, To achieve the same final speed with a force half as big, the force would need to push for 2 seconds.
Learn more about force
https://brainly.com/question/13191643
#SPJ4
The most predominant direction from which the wind blows is from the Northeasteast (NEE,which is part of the northeast but nearer to the east side). The percentage of time that the windblows from this direction is about 36.5-37% of the time.
The NEE directional component is quite consistent throughout the year, with the exception of the summer months.
What is NEE direction?The wind direction from NEE is more frequent in the winter and spring, when cold air masses dominate the region.
The other predominant direction from which the wind blows is the Southwest (SW). The percentage of time that the wind blows from the SW is approximately 31%. The SW directional component is quite consistent throughout the year, and tends to be more frequent in the summer and fall months. This direction of wind is usually associated with warm air masses, which can bring rainfall and storms.
The remaining wind directions, from the North (N), South (S), East (E), and West (W), make up the remaining 32-33% of the time. These directions are usually associated with different weather patterns and are more variable throughout the year. For example, during the summer months, the N and S directional components will be higher than the E and W directional components.
The variability in wind direction throughout the year is caused by a combination of large-scale weather patterns and local terrain. The large-scale weather patterns that affect wind direction are the prevailing winds and global circulation patterns. Local terrain also plays a role, as some areas may have more of a particular direction of wind due to their location.
Overall, the NEE and SW directions are the most predominant wind directions in the region. Although the other four directions make up the remaining portion of the wind patterns, they are usually associated with different weather patterns and are more variable throughout the year.
To know more about weather patterns click-
https://brainly.com/question/28789144
#SPJ4
V2
V3- 31.00 V, 13= ?, R3= 20.00 Ohms
Solve for all the necessary parts of the circuit to answer the followin
question:
What is the current (13) which is flowing through resistor three?.
HELP PLEASE GIVING BRIANLEST
620V current I3, Electric circuits can be simple or sophisticated, but they all consist of the same three fundamental parts:
The Ohm's Law: How to Solve It?V = I*R is the equation for Ohm's Law. Voltage, or V, is an abbreviation for that term. In terms of amps, I stands for current. Ohms are the units used to measure resistance, or R.Electric circuits can be simple or sophisticated, but they all consist of the same three fundamental parts: wires that transport the current through the circuit; a device, like a lamp or motor, that uses the electricity to perform some type of work; and a power source, like a battery or generator.V = I*R is the equation for Ohm's Law. Voltage, or V, is an abbreviation for that term. In terms of amps, I stands for current. Ohms are the units used to measure resistance, or R.V = I * R = 31.00 * 20.00 = 620V.
To learn more about Ohm's Law refer to:
https://brainly.com/question/14296509
#SPJ1
can the speed of the car immediately before the braked are applied be determined without accelerartion
Without accelerating, it is feasible to ascertain a car's speed before the brakes are used. The magnitude of the shift in location depends on an object's speed in kinematics and daily use.
Given that it calculates how much its position has changed in respect to time, it is a scalar quantity. The average speed of an object during a time interval is calculated as the distance travelled in that time interval divided by the interval's duration. The maximum size and direction of an object are referred to as magnitude in physics. Magnitude is a factor that is shared by both vector and scalar values. We are aware that scalar quantities are those that only have a single property—magnitude.
Learn more about speed here
https://brainly.com/question/28224010
#SPJ4
A solid sphere of mass m and radius R rolls down an inclined plane from rest without slipping as shown in the figure. What will be the maximum velocity of the sphere when it will reach the ground?
A √10gh/7
B √gh/7
C √10gh/3
D √gh/3
The maximum velocity of the sphere when it will reach the ground will be [tex]\sqrt{\dfrac{10gh}{7} }[/tex]. Thus, option A is correct.
What are the lowest and highest speeds?A minimum velocity is present at a position where acceleration is both negative to the left and positive to the right. A maximum velocity is at a location where acceleration is positive to the left and negative to the right.
The displacement diminishes as the mass comes closer to the equilibrium position, which also results in a decrease in the restoring force and acceleration. There is no restoring force when the mass reaches the equilibrium position. Since there is no acceleration, the mass is travelling at its fastest possible rate.
For the maximum velocity of the sphere when it reaches the ground, the loss in gravitational potential energy is equal to the gain in translational kinetic energy and rotational kinetic energy,
[tex]$ \Rightarrow \text{ mgh} = \frac{1}{2} mv^2 + \frac{1}{2} I \omega^2[/tex]
[tex]$ \Rightarrow \text{ mgh} = \frac{1}{2} mv^2 + \frac{1}{2} \left(\frac{2}{5}mR^2\right) \omega^2[/tex]
[tex]$ \Rightarrow \text{ mgh} = \frac{1}{2} mv^2 + \frac{1}{2} \times \frac{2}{5}m \times R \times R \times \omega \times \omega[/tex]
From the no-slip condition:
v = Rω
So, [tex]\mathrm{ R \times R \times \omega \times \omega = v \times v = v^2 }[/tex]
[tex]$ \Rightarrow \text{ mgh} = \frac{1}{2} mv^2 + \frac{2}{10} mv^2[/tex]
[tex]$\mathrm{ \Rightarrow \text{ mgh} = \frac{5}{10} mv^2 + \frac{2}{10} mv^2}[/tex]
[tex]$\mathrm{ \Rightarrow \text{ mgh} = mv^2\left(\frac{5 + 2 }{10} \right)}[/tex]
[tex]$\mathrm{ \Rightarrow \text{ mgh} = mv^2\left(\frac{7 }{10} \right)}[/tex]
[tex]$\mathrm{ \Rightarrow \frac{ mgh}{mv^2} = \left(\frac{7 }{10} \right)}[/tex]
[tex]$\mathrm{ \Rightarrow 7{v^2} ={10} gh }[/tex]
[tex]$\mathrm{ \Rightarrow {v^2} = \frac {10 gh} {7}}}[/tex]
[tex]$ \Rightarrow \text v = \sqrt{\frac{10gh}{7} }[/tex]
Thus, the maximum velocity of the sphere when it will reach the ground will be [tex]\sqrt{\dfrac{10gh}{7} }[/tex]. Thus, option A is correct.
Learn more about minimum velocity
brainly.com/question/13104567
#SPJ4
Based on the data in the graph, which of the following represents the total electricity production in the United States from all energy sources, in billions of kilowatt-hours, in 2017?
3.8×1012kWh represents the total electricity production in the United States from all energy sources, in billions of kilowatt-hours, in 2017.
What is meant by electricity?
The collection of physical phenomena known as electricity are those that are connected to the presence and movement of matter that possesses an electric charge.Maxwell's equations describe the phenomenon of electromagnetism, which includes both magnetism and electricity as components.Lightning, static electricity, electric heating, electric discharges, and many other common phenomena have an electrical component.An electric field is created by the existence of an electric charge, which may be positive or negative.Electric current, which results from the movement of electric charges, also creates a magnetic field.A force will act on a charge when it is positioned in an area with an electric field that is not zero.To learn more about electricity refer to
https://brainly.com/question/776932
#SPJ4
Suppose an arrow is shot upward on the moon with a velocity of 33 m/s, then its height in meters after t seconds is given by h(t) = 33t - 0.83t^2 . Find the average velocity over the given time intervals [t1,t2] Round your answers to four decimal places_ [5, 6]: Vave m/s
The average velocity over a given time [3,4] is 27.19 m/sec, the average velocity over a given time [3,3.5] is 27.605 m/sec, the average velocity over a given time [3,3.1] is 27.937 m/sec and this can be determined by using the given data.
What is average velocity?Average velocity is calculated as the displacement or change in position divided by the displacement's time intervals. In order to calculate average velocity, divide the change in position or displacement (x) by the time intervals (t) during which the displacement takes place. Based on the direction of the displacement, the average velocity might either be positive or negative. The SI unit for average speed is meters per second (m/s or ms⁻¹).
Given that:
Suppose an arrow is shot upward on the moon with a velocity of 33 m/s, then its height in meters after t seconds is given by: h(t) = 33t - 0.83t²
a) [3,4]
At time t = 3 and 4, the value of h(t) is given below:
h(3) = 33×(3) - 0.83(3)² = 91.53
h(4) = 33×(4) - 0.83(4)² = 118.72
The average velocity is given by: (118.72 - 91.53) / (4 - 3)
v = 27.19
b) [3,3.5]
At time t = 3 and 3.5, the value of h(t) is given below:
h(3) = 33×(3) - 0.83(3)² = 91.53
h(3.5) = 33×(3.5) - 0.83(3.5)² = 105.3325
The average velocity is given by: ( 105.3325 - 91.53) / (3.5 - 3)
v = 27.605
c) [3,3.1]
At time t = 3 and 3.1, the value of h(t) is given below:
h(3) = 33×(3) - 0.83(3)² = 91.53
h(3.1) = 33×(3.1) - 0.83(3.1)² = 94.3237
The average velocity is given by: (94.3237- 91.53) / (3.1 - 3)
v = 27.937
d) [3,3.01]
At time t = 3 and 3.01, the value of h(t) is given below:
h(3) = 33×(3) - 0.83(3)² = 91.53
h(3.01) = 33×(3.01) - 0.83(3.01)² = 91.8101
The average velocity is given by: (91.8101 - 91.53) / (3.01 - 3)
v = 28.01
e) [3,3.001]
At time t = 3 and 3.001, the value of h(t) is given below:
h(3) = 33×(3) - 0.83(3)² = 91.53
h(3.001) = 33×(3.001) - 0.83(3.001)² = 91.5580
The average velocity is given by: (91.5580 - 91.53) / (3.001 - 3)
v = 28
To know more about average velocity refer to:
https://brainly.com/question/24824545
#SPJ4
The complete question is as follows:
Is consistency in a moral system or code of for a person important
It has been said that ethics is characterized by consistency, or the absence of contradictions.
What is Moral system?We wouldn't know what to do if someone stated, "Open the window yet don't open the window," as the instruction is contradictory and hence illogical.
Similar to this, if our ethical beliefs and actions are inconsistent, logical individuals like ourselves will be perplexed about what to do and split about how to live.
Consistency in ethics refers to the idea that our moral principles, deeds, and ideals shouldn't be at odds with one another.
Therefore, It has been said that ethics is characterized by consistency, or the absence of contradictions.
To learn more about Ethics, refer to the link:
https://brainly.com/question/11992384
#SPJ1