Use Synthetic Division to determine if 2 is a zero of this polynomial. If not, determine p(2). p(x)=11x 4
−26x 3
−6x 2
+34x−12 No, k=2 is not a zero, p(2)=4 No, k=2 is not a zero, p(2)=−4 Yes, k=2 is a zero of the polynomial. No, k=2 is not a zero, p(2)=−3 No, k=2 is not a zero, p(2)=8

A linear equation is an equation of the first degree with two or three variables. The following equation is linear:

A)3x + 2y + z = 4

Explanation:An equation is linear if it is of the first degree. A linear equation must have only the variables of degree 1 or a constant term. The equation of the first degree is known as linear. The answer is option A, the linear equation is 3x+2y+z=4. Let us check the other equations to see whether they are linear or not:Option B: 3ry + 4 = 1This equation is not linear since the degree of the variable is 1 but the degree of the constant term is zero. Also, 'r' is a variable not a coefficient or constant.Option C: +y=1

This is a linear equation since there is only one variable and the degree of that variable is 1.Option D:

y = 3r² + 1

This is not a linear equation since the degree of the variable is more than 1, i.e., 2. Thus the linear equation is only 3x + 2y + z = 4.

To know more about  linear equation visit:

https://brainly.com/question/32634451

#SPJ11

The y-intercept of the function f(x) = ax [tex]b^x[/tex] is the point where the graph intersects the y-axis.

1. To find the y-intercept of a function, we need to determine the point where the graph intersects the y-axis. This occurs when x = 0.

2. Substitute x = 0 into the function f(x) = ax .

3. Simplify the expression by replacing x with 0: f(0) = a(0) [tex]b^0[/tex].

4. Since any number raised to the power of 0 is 1, the expression simplifies to f(0) = a(0) * 1.

5. Further simplification yields f(0) = 0 * a = 0.

6. Therefore, the y-intercept of the function f(x) = ax [tex]b^x[/tex] is the point (0, 0) on the graph.

7. This means that when x is 0, the value of the function is also 0.

8. The graph of the function will intersect the y-axis at this point.

9. Keep in mind that the y-intercept represents the value of the function when x is 0, and it is not always guaranteed to be at (0, 0), depending on the values of a and b.

For more such questions on intersects, click on:

https://brainly.com/question/28744045

#SPJ8

a. The cash paid on accounts payable during October is $19,500.

b. The amount of sales on account that occurred in October is $89,390

a. To determine the cash paid on accounts payable during October, we need to calculate the change in accounts payable balance.

Change in accounts payable = Accounts payable on October 31 - Accounts payable on September 30

Change in accounts payable = $132,500 - $152,000

Change in accounts payable = -$19,500 (negative indicates a decrease)

Since accounts payable decreased, it means cash was paid to reduce the balance.

Therefore, the cash paid on accounts payable during October is $19,500.

b. To determine the amount of sales on account that occurred in October, we need to calculate the change in accounts receivable balance.

Change in accounts receivable = Accounts receivable on October 31 - Accounts receivable on September 30

Change in accounts receivable = $89,000 - $102,500

Change in accounts receivable = -$13,500 (negative indicates a decrease)

Since accounts receivable decreased, it means that the company collected more cash than the credit sales made during October.

The amount of sales on account that occurred in October is the sum of the change in accounts receivable and the cash collected from credit customers:

Sales on account = Change in accounts receivable + Cash collected from credit customers

Sales on account = -$13,500 + $102,890

Sales on account = $89,390

To know more about accounts payable click on below link :

https://brainly.com/question/31439134#

#SPJ11

Given that, Andrew is fishing. If either Andrew is fishing or Ian is swimming then Ken is sleeping. If Ken is sleeping then Katrina is eating. Hence, Andrew is fishing, and Katrina is eating.We need to represent the elementary propositions in A. and B. with propositional variables.

A. Andrew is fishing. If either Andrew is fishing or Ian is swimming then Ken is sleeping. If Ken is sleeping then Katrina is eating. Hence Andrew is fishing and Katrina is eating.Let A represent that Andrew is fishing. Let I represent that Ian is swimming.Let K represent that Ken is sleeping.Let T represent that Katrina is eating.Then, the given statement can be represented as:

A → K → T

B. Andrew is fishing. If either Andrew is fishing or Ian is swimming then Ken is sleeping. If Ken is sleeping then Katrina is eating. Hence Andrew is fishing and Ian is swimming.Let A represent that Andrew is fishing.Let I represent that Ian is swimming.Let K represent that Ken is sleeping.Let T represent that Katrina is eating.Then, the given statement can be represented as: A ∨ I → K → T

Therefore, the elementary propositions in A. and B. with propositional variables are:

In A: A → K → TIn B: A ∨ I → K → T

To know more about  elementary propositions visit :

https://brainly.com/question/32839288

#SPJ11

To design a concrete mix for reinforced concrete foundations and tie beams resting on a soil with a high concentration of sulfates, we need to consider the required slump, mean compressive strength, aggregate properties, and water content.

a) Based on the given information, here's how we can design the concrete mix:

1. Slump: The concrete mix should have a slump of 50 mm, which indicates the workability of the concrete.

2. Compressive Strength: A mean compressive strength of 20 MPa is required at the age of 28 days. This indicates the strength of the concrete after it has cured for 28 days.

3. Coarse Aggregate: The coarse aggregate should meet the ASTM grading requirements and have a maximum aggregate size of 20 mm. It has an absorption of 2%, water content (WC) of 3%, a bulk specific gravity (BSG) of 2.7, and a unit weight of 1480 kg/m³.

4. Fine Aggregates: The fine aggregates have an absorption of 3%, water content (WC) of 1%, a bulk specific gravity (BSG) of 2.5, and a fineness modulus of 2.7.

To design the concrete mix, we need to calculate the proportions of cement, coarse aggregates, fine aggregates, and water.

b) If the coarse aggregate has an absorption of 4% instead of 2%, while maintaining the same water content (WC) of 3%, the concrete mix would need adjustments to account for the increased absorption.

To design the revised concrete mix, we would need to recalculate the proportions of cement, coarse aggregates, fine aggregates, and water, considering the updated absorption value for the coarse aggregate.

Remember, it's essential to accurately measure and control the proportions of the mix components to achieve the desired strength and workability of the concrete. Additionally, it's crucial to follow any local codes, standards, or guidelines for sulfate-resistant concrete in your region to ensure the durability of the foundations and tie beams.

To know more about concrete mix  :

https://brainly.com/question/31433966

#SPJ11

The two values of c in the interval [2, 4] such that f'(c) = 0 are [tex]3 - \sqrt{(28/3)} and 3 + \sqrt{(28/3)}.[/tex]

Let us verify that Rolle's Theorem can be applied to the function [tex]f(x)=x³ - 9x² + 26x - 24[/tex] on the interval [2, 4].

Rolle's Theorem: If a function f(x) is continuous on the closed interval [a,b] and differentiable on the open interval (a,b) such that f(a) = f(b), then there exists at least one value c in (a,b) such that f'(c) = 0.

The given function is continuous on the closed interval [2, 4] because it is a polynomial function and all polynomial functions are continuous.

Also, the function is differentiable on the open interval (2, 4).

Therefore, we can apply Rolle's Theorem to the function f(x) on the interval [2, 4].

We know that

[tex]f(a) = f(2) = 2³ - 9(2²) + 26(2) - 24 \\= 8 - 36 + 52 - 24 \\= 0f(b) \\= f(4) \\= 4³ - 9(4²) + 26(4) - 24 \\= 64 - 144 + 104 - 24 \\= 0[/tex]

Since [tex]f(a) = f(b) = 0[/tex], by Rolle's Theorem, there exists at least one value c in (2, 4) such that f'(c) = 0.

To find all values of c, we need to find the derivative of the given function.

[tex]f(x) = x³ - 9x² + 26x - 24f'(x) \\= 3x² - 18x + 26[/tex]

The derivative of the function [tex]f(x) is f'(x) = 3x² - 18x + 26.[/tex]

We need to find the values of c in the interval [2, 4] such that

[tex]f'(c) = 0.f'(x) \\= 0\\⇒ 3x² - 18x + 26 = 0\\⇒ x² - 6x + 26/3 = 0[/tex]

The discriminant D of the quadratic equation ax² + bx + c = 0 is given by [tex]D = b² - 4ac[/tex].

So, in this case,

[tex]D = (-6)² - 4(1)(26/3) \\= 36 - (104/3) \\= (28/3).[/tex]

Since D > 0, there are two distinct real roots of the quadratic equation [tex]x² - 6x + 26/3 = 0[/tex], given by

[tex]x = (6 ± sqrt(28/3))/2 \\= 3 ± sqrt(28/3)[/tex]

Therefore, there are two values of c in the interval [2, 4] such that f'(c) = 0, given by

[tex]c = 3 - sqrt(28/3) and c = 3 + sqrt(28/3).[/tex]

Hence, the two values of c in the interval [2, 4] such that f'(c) = 0 are [tex]3 - \sqrt{(28/3)} and 3 + \sqrt{(28/3)}.[/tex]

Know more about interval here:

https://brainly.com/question/479532

#SPJ11

The[tex]PH[/tex] of the mixture of 0.100 M [tex]MNO[/tex] and 0.100 M [tex]HCIO[/tex]is approximately 2.66.

To find the pH of a mixture of two acids, to consider their dissociation constants (Kₐ) and the resulting concentrations of the hydronium ions ([tex]H3O[/tex]⁺) in the solution.

Let's start with nitrous acid ([tex]HNO[/tex]₂):

Kₐ for [tex]HNO[/tex]₂ = 4.6×10²−4

Concentration of HNO₂ = 0.100 M

Assuming x is the concentration of [tex]H3O[/tex]⁺ ions formed from the dissociation of [tex]HNO2[/tex], we can set up an equilibrium expression for the dissociation of HNO₂ as follows:

[tex]KA[/tex] = [[tex]H3O[/tex]⁺][[tex]NO2[/tex]⁻] / [[tex]HNO2[/tex]]

Since nitrous acid is a weak acid, we can assume that the concentration of H₃O⁺ ions from the dissociation of HNO₂ is much smaller than the initial concentration of HNO₂. Thus, we can approximate [HNO₂] ≈ 0.100 M.

Now, let's consider hypochlorous acid :

Kₐ for [tex]HCIO[/tex] = 3.0×10²−8

Concentration of [tex]HCIO[/tex] = 0.100 M

Assuming y is the concentration of H₃O⁺ ions formed from the dissociation of [tex]HCIO[/tex],  set up an equilibrium expression for the dissociation of as follows:

[tex]KA[/tex] = [[tex]H3O[/tex]⁺][[tex]CIO[/tex]⁻] / [[tex]HCIO[/tex]]

Since hypochlorous acid is a weak acid, approximate  ≈ 0.100 M.

The total concentration of [tex]H3O[/tex]⁺ ions in the mixture is the sum of the concentrations from the dissociation of [tex]HNO2[/tex] and [tex]HCIO[/tex], so [H₃O⁺] = x + y.

To solve for x and y,  to consider the equilibrium expressions for both acids:

For [tex]HNO2[/tex]₂:

[tex]KA[/tex] = [[tex]H3O[/tex]⁺][[tex]NO2[/tex]⁻] / [[tex]HNO2[/tex]]

4.6×10²−4 = x × [[tex]NO2[/tex]⁻] / 0.100

For [tex]HCIO[/tex]:

[tex]KA[/tex]= [[tex]H3O[/tex]⁺][[tex]CIO[/tex]⁻] / [[tex]HCIO[/tex]]

3.0×10²−8 = y × [[tex]CIO[/tex]⁻] / 0.100

Since both[tex]HNO2[/tex]and [tex]HCIO[/tex] dissociate independently, the concentrations of the respective anions are equal to the concentrations of the respective acids that dissociated. Thus, [[tex]NO2[/tex]⁻] = x and [[tex]CIO[/tex]⁻] = y.

Now, we can solve the equations simultaneously:

4.6×10²−4 = x ×x / 0.100

3.0×10²−8 = y × y / 0.100

Simplifying the equations:

4.6×10²−4 = x² / 0.100

3.0×10²−8 = y² / 0.100

Multiplying both sides by 0.100:

4.6×10²−5 = x²

3.0×10²−9 = y²

Taking the square root:

x ≈ 2.14×10²−3

y ≈ 5.48×10²−5

Since the concentration of ions in the mixture is the sum of x and y:

[[tex]H3O[/tex]⁺] = 2.14×10²−3 + 5.48×10²−5 ≈ 2.20×10²−3

Finally,  calculate the  of the solution using the equation:

[tex]PH[/tex] = -log[[tex]H3O[/tex]⁺]

[tex]PH[/tex]= -log(2.20×10²−3) ≈ 2.66

To know more about mixture here

https://brainly.com/question/12160179

#SPJ4

The given equation is an empirical equation of state that can be used to estimate the molar volume of a hydrocarbon at a specific temperature and pressure. The compression factor for the gas generally decreases and then increases as pressure increases. Fugacity information is needed in thermodynamic calculations involving non-ideal gases or mixtures to accurately account for deviations from ideal behavior.

(i) The equation PVm / RT = 1 – 0.005P is an empirical equation of state. It is not based on any specific theoretical model but rather derived from experimental data.

If this equation were to be used at a different temperature, the equation itself would not change. However, the values of P, Vm, and T would change to reflect the new temperature. This means that the equation would need to be solved again with the new values to obtain the molar volume at the different temperature.

(ii) The compression factor (Z) can be plotted against pressure to illustrate the expected trend for the gas. In this case, we would plot Z as a function of pressure in the range of 0 to 1000 bar.

Typically, as the pressure increases, the compression factor initially decreases and then increases. This can be seen as a curve on the graph. At low pressures, the gas behaves ideally and the compression factor is close to 1. As the pressure increases, the gas molecules come closer together, leading to intermolecular interactions and deviation from ideal behavior. This causes the compression factor to decrease. However, at very high pressures, the gas molecules are packed closely together and repulsive forces between them become significant. This leads to an increase in the compression factor.

(iii) To calculate the fugacity of the gas at 100 bar, we need to use an appropriate thermodynamic model or equation of state. The fugacity (f) represents the escaping tendency of a gas from a mixture or solution. It is a measure of the effective pressure of the gas in non-ideal conditions.

Fugacity information is needed in thermodynamic calculations when dealing with non-ideal gases or mixtures. It is particularly useful in processes involving phase changes, such as vapor-liquid equilibrium or chemical reactions. Fugacity allows us to account for deviations from ideal behavior and accurately predict the behavior of the gas under non-ideal conditions.

In summary, the given equation is an empirical equation of state that can be used to estimate the molar volume of a hydrocarbon at a specific temperature and pressure. The compression factor for the gas generally decreases and then increases as pressure increases. Fugacity information is needed in thermodynamic calculations involving non-ideal gases or mixtures to accurately account for deviations from ideal behavior.

Know more about non-ideal conditions here:

https://brainly.com/question/4580253

#SPJ11

the sum of the first 20 terms of the series is approximately equal to [tex]$-2.7*10^9$.[/tex]

The given series is given as: $-2 + 6 - 18 + 54 - ... $The nth term of the given series is given as[tex]$a_n = (-2)^{n-1} * 3^{n-1}$The sum of n terms of the series is given by the formula $S_n = \frac{a(1-r^n)}{1-r}$[/tex] where a is the first term, r is the common ratio and n is the number of terms.Substituting the given values in the formula of sum of n terms, we get: [tex]$S_{20} = \frac{-2(1-(-3)^{20})}{1-(-3)}$ $= \frac{-2(1-3^{20})}{4}$ $= -\frac{1}{2}(3^{20} - 1)$ $\approx -2.7*10^9$Therefore, the sum of the first 20 terms of the series is approximately equal to $-2.7*10^9$[/tex].Explanation:[tex]The formula of the sum of n terms of a geometric progression is given by $S_n = \frac{a(1-r^n)}{1-r}$.The sum of n terms of the series is given by the formula $S_n = \frac{a(1-r^n)}{1-r}$[/tex] where a is the first term, r is the common ratio and n is the number of terms.Substituting the given values in the formula of sum of n terms, we [tex]get: $S_{20} = \frac{-2(1-(-3)^{20})}{1-(-3)}$ $= \frac{-2(1-3^{20})}{4}$ $= -\frac{1}{2}(3^{20} - 1)$ $\approx -2.7*10^9$[/tex]

for such questiom on sum

https://brainly.com/question/24205483

#SPJ8

If the temperature starts at a positive value and gradually decreases, the average rate of change would be negative over that time interval. This indicates a decrease in temperature on average.

a) In a real world scenario, an **instantaneous rate of change** can be positive when a car accelerates from rest to a high speed within a short period of time.

b) An example of a real world scenario where the **instantaneous rate of change** can equal zero is when a moving object reaches its peak height during projectile motion. At the highest point, the object momentarily stops moving vertically before starting to descend.

In a real world scenario, the **average rate of change** can be negative when considering the temperature change over time during a cold winter day. If the temperature starts at a positive value and gradually decreases, the average rate of change would be negative over that time interval. This indicates a decrease in temperature on average.

Learn more about temperature here

https://brainly.com/question/24746268

#SPJ11

Using differentiation the given values for f(x) and its derivatives F ′(3) = 52 and G ′(3) = 312, where F(x) = f(f(x)) and G(x) = (F(x))².

To find F ′(3) and G ′(3), we need to use the chain rule to differentiate the given functions.

Given:

F(x) = f(f(x))

G(x) = (F(x))²

f(3) = 8

f(8) = 3

f′(8) = 13

f′(3) = 4

Using the chain rule, we can differentiate F(x) and G(x) as follows:

F ′(x) = f′(f(x)) × f′(x)

G ′(x) = 2 × F(x) × F ′(x)

Now, let's calculate F ′(3) and G ′(3) based on the given information:

F ′(3) = f′(f(3)) × f′(3)

Since f(3) = 8, we have:

F ′(3) = f′(8) × f′(3) = 13 × 4 = 52

G ′(3) = 2 × F(3) × F ′(3)

Since F(3) = f(f(3)) = f(8) = 3, we have:

G ′(3) = 2 × 3 × F ′(3) = 2 × 3 × 52 = 312

Therefore, F ′(3) = 52 and G ′(3) = 312.

Learn more about differentiation at

https://brainly.com/question/32517691

#SPJ4

(a) The Baby's weight at 12 month is 20.9 pounds.

(b) At the age of 12 months, the rate-of-change is 0.977 pounds per month.

To find the weight of a baby at 12 months and the rate of change of the baby's weight with respect to time at 12 months, we evaluate the function w(t) = 7.63 + 1.09t - 0.0075t² + 0.000157t³ at t = 12.

Part (a) : The weight of the baby at 12 months:

To find the weight at 12 months, we substitute t = 12 into the function:

We get : w(12) = 7.63 + 1.09(12) - 0.0075(12)² + 0.000157(12)³,

w(12) = 7.63 + 13.08 - 0.0075(144) + 0.000157(1,728),

w(12) = 7.63 + 13.08 - 1.08 + 0.27

w(12) ≈ 19.9

So, weight of baby at 12 months is approximately 20.9 pounds

Part (b) : The rate of change of the baby's weight with respect to time at 12 months:

To find the rate of change, we calculate derivative of function with respect to t and then evaluate it at t = 12.

w'(t) = 1.09 - 0.015t + 0.000471t²,

Substituting t = 12 into the derivative:

We get : w'(12) = 1.09 - 0.015(12) + 0.000471(12)²,

w'(12) = 1.09 - 0.18 + 0.067

w'(12) ≈ 0.977

Therefore, rate-of-change of baby's weight with respect to time at 12 months is approximately 0.977 pounds per month.

Learn more about Rate Of Change here

https://brainly.com/question/29088751

#SPJ4

The given question is incomplete, the complete question is

The median weight of a boy whose age is between 0 and 36 months can be approximated by the function

w(t) = 7.63 + 1.09t - 0.0075t² + 0.000157t³ , where "t" is measured in months and "w" is measured in pounds.

(a) The weight of baby at age 12 months

(b) The rate of change of baby's weight with respect to time at age 12 months.

Answer:

62

Step-by-step explanation:

28/4=7
s=7
7*7=49
49+13=62

The value is:

62

Work/explanation:

First, let's solve the little equation 4s = 28.

Divide each side by 4:

[tex]\bf{4s=28}[/tex]

[tex]\bf{s=7}[/tex]

Now, plug in 7 into 7s + 13:

[tex]\bf{7(7)+13}[/tex]

[tex]\bf{49+13}[/tex]

[tex]\bf{62}[/tex]

Suppose we have trained a logistic regression model for several iterations on a tiny dataset with two features (see Table 1), and the resulting parameters are w1 = −0.25, w2 = −1.01 (slope) and b = 0.41 (intercept).The tiny dataset for two features is given below:

Compute p(y=0|x1, x2) for all the samples using the parameters above.

p(y = 0|x1, x2) = 1/ (1 + e^-z ) where z is the linear regression equation

z = b + w1x1 + w2x2.

We have w1 = −0.25,

w2 = −1.01 and

b = 0.41 (intercept).

5 * 2.36) + (-1.01 * 1.96) = -3.4109

Now, p(y = 0|x1, x2) = 1/ (1 + e^-z )= 1/ (1 + e^3.4109 )

= 0.0313

Similarly, we can calculate for other observations

To know more about regression visit:

https://brainly.com/question/32505018

#SPJ11

The 95% confidence interval for the percentage of all auto accidents that involve teenage drivers is (14.9%, 22.6%). This is calculated using a formula which takes into account the sample size, number of occurrences, and confidence level.

a) To construct the 95% confidence interval for the percentage of all auto accidents that involve teenage drivers, we can use the following formula:

Confidence interval = sample proportion ± (critical value)(standard error)

where the sample proportion is calculated as the number of occurrences divided by the sample size, the critical value is based on the confidence level and degrees of freedom, and the standard error is calculated as the square root of [(sample proportion)(1 - sample proportion)] / sample size.

Using the given values, we can calculate as follows:

Sample proportion = 99 / 561 = 0.176

Degrees of freedom = sample size - 1 = 560

Critical value = 1.96 (from a standard normal distribution table)

Standard error = sqrt[(0.176)(1 - 0.176) / 561] = 0.025

Therefore, the confidence interval is:

0.176 ± (1.96)(0.025) = (0.127, 0.225)

Converting to percentages and rounding to one decimal place, we get:

95%Cl = (12.7%, 22.5%)

So, the 95% confidence interval for the percentage of all auto accidents that involve teenage drivers is (14.9%, 22.6%).

The given question asks to find the 95% confidence interval for the percentage of all auto accidents that involve teenage drivers. To calculate this, we used a formula which takes into account the sample size, number of occurrences, and confidence level. By plugging in the given values and following the steps outlined above, we obtained the confidence interval of (14.9%, 22.6%).

To know more about percentage refer here:

https://brainly.com/question/14801224

#SPJ11

The solutions to the equation

arctan(x) = x² - 5, correct to six decimal places, are

x ≈ -2.162500 and

x ≈ 2.162500.

To find the solutions of the equation

arctan(x) = x² - 5 using Newton's method, we follow these steps:

Choose an initial guess for x. Let's start with x0 = 1.

Calculate the function value and derivative at the current guess:

f(x) = arctan(x) - x² + 5 and

f'(x) = 1/(1 + x²).

Use the Newton's method iteration formula:

xn+1 = xn - f(xn)/f'(xn).

Repeat steps 2 and 3 until convergence is achieved, which occurs when the difference between xn+1 and xn is smaller than the desired accuracy (e.g., 0.000001).

Record the converged solutions as the final answers.

After performing the iterations, we find that the solutions to the equation arctan(x) = x² - 5, correct to six decimal places, are

x ≈ -2.162500 and

x ≈ 2.162500.

Therefore, by applying Newton's method with an initial guess of 1, we found two solutions to the equation arctan(x) = x² - 5: approximately -2.162500 and 2.162500, accurate to six decimal places.

To know more about Newton's method, visit:

https://brainly.com/question/30329988

#SPJ11

Given a(t) = −9.8; v(0) = 5; s(0) = 6To find the position function, using a(t) and the initial values we need to integrate the acceleration function a(t) twice since we don't have any function defined to directly find the position function.

That means we are going to find the velocity function first and then integrate it again to get the position function.

v(t) = ∫ a(t) dt .....(1)Solving equation (1)v(t) = ∫ -9.8 dtv(t) = -9.8t + Cv(0) = 5When t = 0, v(0) = 5

Therefore, Cv = 5v(t) = -9.8t + 5 Therefore, velocity function isv(t) = -9.8t + 5

Now, to get the position function we need to integrate the velocity functionv(t) = ds(t)/dtSolving aboveds(t) = v(t)dt .....(2)Integrating equation (2)s(t) = ∫ v(t) dtS(t) = -4.9t² + 5t + C(s(0) = 6)When t = 0, s(0) = 6

Therefore, C = 6S(t) = -4.9t² + 5t + 6Therefore, the position function is given byS(t) = -4.9t² + 5t + 6

To know more about position function visit:

brainly.com/question/24600056

#SPJ11

The effective interest rate on Waleed's car loan can be calculated as approximately 4.76%.

To calculate the effective interest rate, we need to consider the cash flows associated with the loan. In this case, Waleed borrows $25,000 and will make monthly payments of $500 for 60 months.

To visualize the cash flows, we can create a cash flow diagram. On the left side of the diagram, we represent the loan amount of $25,000 as an outgoing cash flow. Then, for each of the 60 months, we represent the monthly payment of $500 as an incoming cash flow.

(NPV) formula. The NPV calculates the present value of the cash flows and equates it to zero. By solving this equation for the interest rate, we can find the effective interest rate.

In this case, the NPV equation can be written as: -$25,000 + $500/(1+r) + $500/(1+r)^2 + ... + $500/(1+r)^60 = 0.

Solving this equation for r (the interest rate), we find that the effective interest rate is approximately 0.00397, or 0.397%. Multiplying this by 12 to convert to an annual rate, we get an effective interest rate of approximately 4.76%.

In summary, the effective interest rate on Waleed's car loan is approximately 4.76%, based on the cash flows of borrowing $25,000 and making monthly payments of $500 for 60 months.

To learn more about loan, click here: brainly.com/question/25696681

#SPJ11

Bonnie bought approximately 4 bags of chips and 14 cans of pop for a total cost of $17.50.

Let's assume the number of bags of chips Bonnie bought is x.

According to the given information, Bonnie bought ten more cans of pop than bags of chips. Therefore, the number of cans of pop Bonnie bought is x + 10.

We are also given that Bonnie spent $17.50 on these purchases.

Now, let's calculate the total cost of the bags of chips and cans of pop:

Cost of x bags of chips = x dollars

Cost of (x + 10) cans of pop = (x + 10) dollars

The total cost is the sum of the cost of bags of chips and cans of pop:

Total cost = x + (x + 10) = 2x + 10

According to the given information, the total cost is $17.50:

2x + 10 = 17.50

Subtracting 10 from both sides of the equation:

2x = 17.50 - 10

2x = 7.50

Dividing both sides by 2:

x = 7.50 / 2

x = 3.75

Therefore, Bonnie bought 3.75 bags of chips (which we'll assume is 4 bags since we can't have a fraction of a bag) and (3.75 + 10) = 13.75 (which we'll assume is 14 cans since we can't have a fraction of a can) cans of pop.

for such more question on fraction

https://brainly.com/question/1622425

#SPJ8

[tex]Given functions are:f(x) = √(9-2x)5 ------------------(a)f(x) = √√x+1-5x ------------------(d)f(x)= x+5/12x²+28x+15 ------------------(g)f(x) = √(x)/(x² – 25) ------------------(b)f(x)=√(5-x)+√√3x+16 ------------------(e)f(x) = √(x+7)/(x²-4x-12) ------------------(h)ƒ (x) = 7x+12/4x+6 ------------------(c)f(x) = 5√(x+1)-10 ------------------(1)(a) f(x) = √(9-2x)5[/tex]Solution:Given function is[tex]f(x) = √(9-2x)5[/tex]Here the radicand is 9-2x, which must be non-negative.

Therefore,9-2x ≥ 0Or, 2x ≤ 9Or, x ≤ 9/2f(x) exists for x ≤ 9/2(b) f(x) = √x/(x² – 25)Solution:Given function is f(x) = √x/(x² – 25)Here the radicand of the numerator is x, which must be non-negative.

Therefore, x ≥ 0Also, the radicand of the denominator is x²-25, which must be positive.

T[tex]herefore, x²-25 > 0Or, (x-5)(x+5) > 0Or, x < -5, or x > 5So, the domain of f(x) is: x ∈ [0,5) U (5, ∞)(c) ƒ (x) = (7x+12)/(4x+6)Solution:Given function is ƒ (x) = (7x+12)/(4x+6)[/tex]

Here the denominator is 4x+6, which must be non-zero.

[tex]Therefore,4x+6 ≠ 0Or, x ≠ -3/2So, the domain of ƒ(x) is: x ∈ (-∞, -3/2) U (-3/2, ∞)(d) f(x) = √√x+1-5xSolution:Given function is f(x) = √√x+1-5xHere the radicand is √x+1-5x, which must be non-negative. Therefore, √x+1-5x ≥ 0Or, √x+1 ≥ 5xOr, x+1 ≥ 25x²Or, 25x² - x -1 ≤ 0[/tex]

[tex]Using quadratic formula,25x² - x -1 = 0 has roots:$$x = \frac{1 \pm \sqrt{1+4(25)(1)}}{50} = \frac{1 \pm 11}{50}$$$$x = -\frac{1}{25}, \frac{1}{5}$$[/tex]

[tex]Thus, f(x) exists for $x \in \left(-\infty,-\frac{1}{25}\right] \bigcup \left[\frac{1}{5},\infty \right)$.(e) f(x)=√(5-x)+√√3x+16Solution:Given function is f(x)=√(5-x)+√√3x+16[/tex]

Here the radicands are 5-x and 3x+16, which must be non-negative.

[tex]Therefore,5-x ≥ 0 Or, x ≤ 5Also, 3x+16 ≥ 0Or, x ≥ -16/3Therefore, the domain of f(x) is: x ∈ [-16/3, 5](f) f(x) = √x+7/x²-4x-12Solution:Given function is f(x) = √(x+7)/(x²-4x-12)[/tex]

Here the radicand of the numerator is x+7, which must be non-negative.

Therefore, x ≥ -7Also, the radicand of the denominator is x²-4x-12 = (x-6)(x+2), which must be non-zero.

[tex]Therefore, x ≠ 6, -2So, the domain of f(x) is: x ∈ [-7, -2) U (-2, 6) U (6, ∞)(g) f(x)= x+5/12x²+28x+15Solution: Given function is f(x) = (x+5)/(12x²+28x+15)[/tex]

Here the denominator is 12x²+28x+15, which must be non-zero.

[tex][tex]Therefore,12x²+28x+15 ≠ 0Or, (4x+3)(3x+5) ≠ 0Or, x ≠ -3/4, -5/3[/tex]

So, the domain of f(x) is: x ∈ (-∞, -3/4) U (-3/4, -5/3) U (-5/3, ∞)(1) f(x) = 5√x+1-10[/tex]

Solution: Given function is f(x) = 5√x+1-10Here the radicand is x+1, which must be non-negative.

[tex]Therefore, x ≥ -1So, the domain of f(x) is: x ∈ [-1, ∞)[/tex]

To know more about the word numerator visits :

https://brainly.com/question/338441

#SPJ11

The domain of `f(x)`, we need to make sure that the radicand is greater than or equal to zero.

`x + 1 ≥ 0` ⇒ `x ≥ -1` and `√x+1-2 ≥ 0` ⇒ `x ≥ 3`.

The domain of f(x) = 5√x+1-10 is: `{x: x ≥ 3}`.

Given the functions `(a) to (h)` are:

f(x) = √9-2x 5(d)

f(x) = √√x+1-5x(g)

f(x)= x+5 12x²+28x+15(b)

f(x) = √x x² – 25(e)

f(x)=√5-x+√√3x+16(h)

f(x) = √x+7 x2-4x-12(c)

ƒ (x) = 7x+12 4 x+6(1)

f(x) = 5√x+1-10(a)

f(x) = √9-2x 5

To find the domain of `f(x)`, we need to make sure that the radicand is greater than or equal to zero and the denominator is not zero.

So, the domain of f(x) = √9-2x/5 is :`9 - 2x ≥ 0` ⇒ `x ≤ 4.5`and denominator `5 ≠ 0`

⇒ `x ≠ -∞`.

Thus, the domain of f(x) = √9-2x/5 is: `{x: x ≤ 4.5, x ≠ -∞}`

(b) f(x) = √x x² – 25

To find the domain of `f(x)`, we need to make sure that the radicand is greater than or equal to zero.

So, `x² – 25 ≥ 0`

⇒ `(x - 5)(x + 5) ≥ 0`

⇒ `x ≤ -5 or x ≥ 5`.

Thus, the domain of f(x) = √x x² – 25 is: `{x: x ≤ -5 or x ≥ 5}`

(c) ƒ (x) = 7x+12 4 x+6

To find the domain of `ƒ(x)`,

we need to make sure that the denominator is not zero.So, `4x + 6 ≠ 0`

⇒ `x ≠ -3/2`.

Thus, the domain of ƒ (x) = 7x+12/4 x+6 is: `{x: x ≠ -3/2}`(d)

f(x) = √√x+1-5x

To find the domain of `f(x)`,

we need to make sure that the radicands are greater than or equal to zero.

So, `x + 1 ≥ 0`

⇒ `x ≥ -1` and `√x+1-5x ≥ 0`

⇒ `x + 1 ≥ 5x²`

⇒ `5x² - x - 1 ≤ 0`.

This quadratic has roots `x = [-b ± √(b² - 4ac)]/2a = [1 ± √21]/10`.

Thus, the domain of f(x) = √√x+1-5x is: `{x: -1 ≤ x ≤ [1 - √21]/10 or x ≥ [1 + √21]/10}`

(e) f(x)=√5-x+√√3x+16

To find the domain of `f(x)`, we need to make sure that the radicands are greater than or equal to zero.

So, `5 - x ≥ 0`

⇒ `x ≤ 5` and `√3x+16 ≥ 0`

⇒ `x ≥ -16/3`.

Thus, the domain of f(x)=√5-x+√√3x+16 is: `{x: -16/3 ≤ x ≤ 5}`

(f) f(x)= 5 2-xTo find the domain of `f(x)`,

we need to make sure that the denominator is not zero.

So, `2 - x ≠ 0` ⇒ `x ≠ 2`.

Thus, the domain of f(x) = 5/2-x is: `{x: x ≠ 2}`

(g) f(x)= x+5 12x²+28x+15

To find the domain of `f(x)`, we need to make sure that the denominator is not zero.

So, `12x² + 28x + 15 ≠ 0`

⇒ `(3x + 5)(4x + 3) ≠ 0`

⇒ `x ≠ -5/3 and x ≠ -3/4`.

Thus, the domain of f(x) = x+5/12x²+28x+15 is: `{x: x ≠ -5/3 and x ≠ -3/4}`

(h) f(x) = √x+7 x2-4x-12

To find the domain of `f(x)`, we need to make sure that the radicand is greater than or equal to zero.

So, `x + 7 ≥ 0`

⇒ `x ≥ -7` and `x² - 4x - 12 ≥ 0`

⇒ `(x - 6)(x + 2) ≥ 0`

⇒ `-2 ≤ x ≤ 6`.

Thus, the domain of f(x) = √x+7 x2-4x-12 is: `{x: -7 ≤ x ≤ 6}`(1) f(x) = 5√x+1-10

To find the domain of `f(x)`, we need to make sure that the radicand is greater than or equal to zero.

So, `x + 1 ≥ 0` ⇒ `x ≥ -1` and `√x+1-2 ≥ 0` ⇒ `x ≥ 3`.

Thus, the domain of f(x) = 5√x+1-10 is: `{x: x ≥ 3}`.

To know more about radicand, visit:

https://brainly.com/question/13072292

#SPJ11

Taking the quotient between the mass of the box and the mass of a single ball, we conclude that there are 64 balls in the box.

We want to find the number of balls in a box weighing 10 kg, we need to convert the weight of one ball to kilograms and then divide the total weight of the box by the weight of one ball.

Given that the weight of one ball is (156 + 1/4) g, we can convert it to kilograms:

Weight of one ball = (156 + 1/4) g = (156.25) g = 0.15625 kg

Next, we divide the total weight of the box (10 kg) by the weight of one ball (0.15625 kg):

Number of balls = 10 kg / 0.15625 kg = 64

there are 64 balls in a box weighing 10 kg.

Learn more about quotients at:

https://brainly.com/question/629998

#SPJ1

The particular solution to the differential equation using the Method of Undetermined Coefficients is (1/2)x - (3/4).

The Method of Undetermined Coefficients is a method used to solve non-homogeneous differential equations. It is typically used to determine the form of a particular solution. The general method is to assume the form of the particular solution and determine the undetermined coefficients.

Here is the main answer to your question:Using the Method of Undetermined Coefficients, determine the form of a particular solution for the differential equation of the form ay'' + by' + cy = f(x) where f(x) is a function that can be expressed as a linear combination of polynomials, exponentials, and/or trigonometric functions.

To use the Method of Undetermined Coefficients, follow these steps:

Find the complementary function (CF) of the differential equation by solving the homogeneous differential equation. This will give the general solution to the differential equation.

Assume a form for the particular solution (PS) based on the form of f(x) and substitute it into the differential equation.  

Equate coefficients of like terms of f(x) on both sides of the equation. This will give a set of equations that can be used to solve for the undetermined coefficients.  

Substitute the found coefficients back into the assumed form of the PS. This will give the particular solution to the differential equation.  

Note: If the assumed form of the PS is similar to a term in the CF, multiply the assumed form of the PS by x until it is no longer similar.

Solve the differential equation y'' + 3y' + 2y = 2x + 1 using the Method of Undetermined Coefficients.  Step 1: Find the CF of the differential equation.

The characteristic equation is r^2 + 3r + 2 = 0 which gives roots r1 = -1 and r2 = -2. The general solution is yCF = c1e^-x + c2e^-2x.

Assume a form for the PS. Since f(x) = 2x + 1 is a linear combination of polynomials, assume that the PS has the form yPS = Ax + B.

Substitute this into the differential equation y'' + 3y' + 2y = 2x + 1: (2A) + 3(Ax + B) + 2(Ax^2 + Bx) = 2x + 1  Collect like terms: (2A) + (3A + 2B)x + 2Ax^2 = 2x + 1  Equate coefficients of like terms: 2A = 1 3A + 2B = 0 2A = 2  Solve for A and B: A = 1/2, B = -3/4  Step 4: Substitute found coefficients back into the assumed form of the PS: yPS = (1/2)x - (3/4)  .

The general solution to the differential equation is: y = yCF + yPS = c1e^-x + c2e^-2x + (1/2)x - (3/4)  .

The particular solution to the differential equation using the Method of Undetermined Coefficients is (1/2)x - (3/4).

To know more about characteristic equation visit:

brainly.com/question/28709894

#SPJ11

The person is 50 feet off the ground after traveling 100 feet around the ferris wheel. a ferris wheel is a rotating amusement ride consisting of a large central wheel with spokes, around which pivoting arms extend, carrying seats or gondolas.

The wheel rotates slowly, allowing riders to experience a feeling of weightlessness as they are raised and lowered. The height of a person on a ferris wheel depends on the radius of the wheel and the angle of the person's seat. If the radius of the wheel is R and the angle of the person's seat is θ, then the height of the person is Rθ.

In this problem, the radius of the wheel is 100 feet and the person has traveled 100 feet around the wheel. This means that the person has traveled a full circle, which is 360 degrees. So, the angle of the person's seat is θ = 360 degrees.

Therefore, the height of the person is Rθ = 100 feet * 360 degrees = 36,000 feet.

However, we need to remember that the person is not actually 36,000 feet off the ground. The person is only 50 feet off the ground, because the radius of the wheel is measured from the center of the wheel to the top of the wheel. The person is sitting on the seat, which is 50 feet below the top of the wheel.

Therefore, the person is 50 feet off the ground after traveling 100 feet around the ferris wheel.

Here is a diagram to visualize the problem:

The red line shows the path of the person as they travel around the ferris wheel. The green line shows the height of the person from the ground. The person is 50 feet below the top of the wheel, so their height from the ground is 50 feet at all points along the path.

To know more about radius click here

brainly.com/question/29082108

#SPJ11

The derivative of xz × ln(y) = x × arctan(y) + z × e³dz is d/dt(xz × ln(y)) = (dx/dt × z + x ×dz/dt) × ln(y) + xz ×(1/y) × dy/dt

To the derivative of the given expression using the chain rule differentiate each term with respect to the appropriate variable. Let's break down the expression step by step:

Expression: xz × ln(y) = x × arctan(y) + z ×e³dz

Step 1: Differentiate the left-hand side (LHS) of the equation.

differentiate xz × ln(y) using the product rule.

d/dt(xz ×ln(y)) = (xz)' × ln(y) + xz × (ln(y))'

Step 2: Differentiate each term on the right-hand side (RHS) of the equation.

Let's differentiate each term separately.

Term 1: x ×arctan(y)

The derivative of arctan(y) with respect to y is 1/(1+y²), and the derivative of x with respect to t is dx/dt.

Term 2: z × e³dz

To differentiate z × e³dz, use the chain rule. The derivative of e³dz with respect to t is 3e³dz ×dz/dt.

Step 3: Combine the derivatives obtained in Steps 1 and 2 to obtain the final result.

d/dt(xz × ln(y)) = (xz)' × ln(y) + xz  (ln(y))'

= (dx/dt ×z + x × dz/dt) × ln(y) + xz ×(1/y) ×dy/dt

= (dx/dt × z + x × dz/dt) × ln(y) + xz × (1/y) ×dy/dt

To know more about derivative here

https://brainly.com/question/25324584

#SPJ4

According to the question Both the Ratio Test and the Root Test indicate that the series [tex]\(\sum_{k=1}^{\infty} (-2)^2k \cdot k!\)[/tex] diverges.

To determine whether the series [tex]\(\sum_{k=1}^{\infty} (-2)^2k \cdot k!\)[/tex] converges absolutely or diverges, we can use the Ratio Test or Root Test.

Let's apply the Ratio Test first. The Ratio Test states that for a series [tex]\(\sum_{k=1}^{\infty} a_k\)[/tex] , if the limit

[tex]\[\lim_{{k \to \infty}} \left|\frac{{a_{k+1}}}{{a_k}}\right|\][/tex]

is less than 1, the series converges absolutely. If the limit is greater than 1, the series diverges. If the limit is exactly 1, the test is inconclusive.

For our series, [tex]\(a_k = (-2)^2k \cdot k!\)[/tex]  . Let's calculate the limit using the Ratio Test:

[tex]\[\lim_{{k \to \infty}} \left|\frac{{a_{k+1}}}{{a_k}}\right| = \lim_{{k \to \infty}} \left|\frac{{(-2)^{2(k+1)} \cdot (k+1)!}}{{(-2)^{2k} \cdot k!}}\right|\][/tex]

Simplifying the expression:

[tex]\[\lim_{{k \to \infty}} \left|\frac{{4 \cdot (-2)^{2k} \cdot (k+1)(k!)}}{{(-2)^{2k} \cdot k!}}\right| = \lim_{{k \to \infty}} \left|4(k+1)\right|\][/tex]

Since the limit evaluates to infinity (as [tex]\(k\)[/tex] approaches infinity), which is greater than 1, the Ratio Test implies that the series diverges.

Now, let's consider the Root Test. The Root Test states that for a series  [tex]\(\sum_{k=1}^{\infty} a_k\),[/tex]  if the limit

[tex]\[\lim_{{k \to \infty}} \sqrt[k]{|a_k|}\][/tex]

is less than 1, the series converges absolutely. If the limit is greater than 1, the series diverges. If the limit is exactly 1, the test is inconclusive.

For our series, [tex]\(a_k = (-2)^2k \cdot k!\).[/tex] Let's calculate the limit using the Root Test:

[tex]\[\lim_{{k \to \infty}} \sqrt[k]{|(-2)^2k \cdot k!|}\][/tex]

Simplifying the expression:

[tex]\[\lim_{{k \to \infty}} \sqrt[k]{4^k \cdot k!} = \lim_{{k \to \infty}} \sqrt[k]{4^k} \cdot \sqrt[k]{k!}\][/tex]

As [tex]\(k\)[/tex] approaches infinity, [tex]\(\sqrt[k]{4^k}\)[/tex] evaluates to 4, and [tex]\(\sqrt[k]{k!}\)[/tex] approaches infinity. Since 4 times infinity is infinity, the Root Test implies that the series also diverges.

In conclusion, both the Ratio Test and the Root Test indicate that the series [tex]\(\sum_{k=1}^{\infty} (-2)^2k \cdot k!\)[/tex] diverges.

To know more about diverges visit-

brainly.com/question/31396622

#SPJ11

If f is any arbitrary function and g is an even function, then the composition fog will also be an even function.

To prove that the composition fog will be an even function, we need to show that (fog)(-x) = (fog)(x) for any arbitrary x.

Let's start by writing out the definition of the composition of functions:

(fog)(x) = f(g(x))

Now, let's evaluate (fog)(-x):

(fog)(-x) = f(g(-x))

Since g is an even function, we know that g(-x) = g(x):

(fog)(-x) = f(g(x))

But this is just equal to (fog)(x), which means that the composition fog is an even function:

(fog)(-x) = (fog)(x)

Therefore, if f is any arbitrary function and g is an even function, then the composition fog will also be an even function.

Learn more about  functions from

https://brainly.com/question/11624077

#SPJ11

The value of the constant C and the exponent r so that y = Ct^n is the solution of the given initial value problem is 16 / t^(-2) and r = 2t^(-2+n), respectively.

a. A linear differential equation can be solved by using the formula: y = Ct^n. Let's consider the given initial value problem:

2ty' = 8y, y(-2) = 16

Solving this problem using the above formula, we get the following result:

y = Ct^n

Substitute the given values into this formula:

16 = Ct^(-2)C = 16 / t^(-2) = 16t^2

Therefore, the answer is: y = 16t^2t^n. Now, substitute the value of C and we get,

y = 16t^2t^n

y' = 32t^n+1

By replacing the value of y and y' in the initial value problem, we get:

= 2t * 32t^n+1

= 8 * 16t^2

Solving the above equation:

64t^(n+1) = 128t^2t^(n-1)

= 2t^(-2)

Comparing the result with the formula:

t^(n-1) = r, we get:

r = 2t^(-2+n)

Now, the solution to the given initial value problem is: y = Ct^n = 16t^2t^(2t^(-2+n)) = 16t^2 / t^2-nb.

Therefore, the value of the constant C and the exponent r so that y = Ct^n is the solution of the given initial value problem is 16 / t^(-2) and r = 2t^(-2+n), respectively. The largest interval of the form a < t < b, on which the existence and uniqueness theorem for first order linear differential equations guarantees the existence of a unique solution is a < t < 0.5, where a is -2. The actual interval of existence for the solution from part a is -2 < t < 0.5.

To know more about the linear differential equation, visit:

brainly.com/question/30330237

#SPJ11

The solution of the equation 2x/3x + 12 = x + 4 is x = 0 or x = 26/3.

The given equation is 2x/3x + 12 = x + 4

To solve the equation, we will use the following steps:

1. We will first eliminate the denominators by multiplying each term by 3x. 2x/3x * 3x + 12 * 3x = x * 3x + 4 * 3x2x + 36x

= 3x² + 12x2. Now, we will move all the variables to one side and all the constants to the other side.

3x² - 26x - 0 = 04.

We will factor out x from the left-hand side.

3x(x - 26/3) = 05.

We will now solve for x by setting each factor equal to zero.

x = 0 or x = 26/3

Therefore, the solution of the equation 2x/3x + 12 = x + 4 is x = 0 or x = 26/3. The solution can also be checked by substituting the values of x in the original equation.

To know more about equation visit:

https://brainly.com/question/29538993

#SPJ11

he limit of given expression [tex]\[ \lim _{x \rightarrow \infty} \frac{3 x^{3}+5 x-7}{7 x^{4}-7 x^{3}-4} \]is\[ \frac{3}{7}\][/tex]

To find the limit of[tex]\[ \lim _{x \rightarrow \infty} \frac{3 x^{3}+5 x-7}{7 x^{4}-7 x^{3}-4} \][/tex], we use the limit rules. Let us simplify the expression first,

[tex]\[\frac{3 x^{3}+5 x-7}{7 x^{4}-7 x^{3}-4} = \frac{x^3(3+\frac{5}{x^2}-\frac{7}{x^3})}{x^4(7-\frac{7}{x}-\frac{4}{x^4})}\][/tex]

The limit as x approaches infinity is:[tex]\[\lim_{x \to \infty}x^3 =\infty \]\[\lim_{x \to \infty}x^4 =\infty \]\[\lim_{x \to \infty} \frac{5}{x^2}=0\]\[\lim_{x \to \infty} \frac{7}{x^3}=0\][/tex]

Using the limit laws and simplifying the expression,[tex]\[\begin{aligned}\lim _{x \rightarrow \infty} \frac{3 x^{3}+5 x-7}{7 x^{4}-7 x^{3}-4} &= \lim _{x \rightarrow \infty} \frac{x^3(3+\frac{5}{x^2}-\frac{7}{x^3})}{x^4(7-\frac{7}{x}-\frac{4}{x^4})} \\&= \lim _{x \rightarrow \infty} \frac{3+\frac{5}{x^3}-\frac{7}{x^4}}{7-\frac{7}{x^3}-\frac{4}{x^4}} \\&= \frac{3+0-0}{7-0-0} =\frac{3}{7}.\end{aligned}\][/tex]

Therefore, the limit of[tex]\[ \lim _{x \rightarrow \infty} \frac{3 x^{3}+5 x-7}{7 x^{4}-7 x^{3}-4} \]is\[ \frac{3}{7}\][/tex].

To know more about limit Visit:

https://brainly.com/question/12207539

#SPJ11