Using the CER format (claims, evidence and reasoning), answer the following question: Three resistors are connected in series: (14 Ohms, 2.5 Ohms and 22 Ohms). If all these resistors were light bulbs, which would be the brightest? (CLEARLY IDENTIFY YOUR CLAIM, EVIDENCE AND REASONING.)

In the series of a flashlight's barrel, the fraction of the chemical energy transformed appears as internal energy in the batteries as 0.460.

b) the expression for the total emf for the given circuit is

E = nV

E = total emf for the circuit

n = number of batteries

V = voltage across the batteries

Substitute 2 for n, 1.50V for V in the above equation to find E

E = 2 x 1.500V

= 3.0V

Total emf = 3.0V

By using the formula to calculate total internal resistance for the circuit

r = r1+r2

r = total circuit's resistance

r1 = one battery's internal resistance

r2 = internal resistance of other battery

Substitute 0.350 for r1 and 0.110 for r2 in the above formula then,

r = 0.350+0.110

= 0.460

Hence, the total internal resistance for the circuit is 0.408

To learn more about resistance: https://brainly.com/question/17563681

#SPJ4

The direction of the force is sliding friction is always select one to that velocity of the object and is Select one Statics friction this statement is false.

Friction is the force resisting to the relative motion of the  solid surfaces, fluid layers, and material elements and the  sliding against each  other. There are some several types of friction: Dry friction is a force and that opposes the relative lateral and the  motion of two solid surfaces in contact.

Frictional force offers to the resistance to the applied by the  force opposing it is the  motion. Thus, it always acts like it is  in the direction of the  opposite to that of the object in the motion

So it will not be in direction  of the motion

And static friction also work  as the opposite direction of the  motion .

Thus, it is false.

To know more about friction click-

https://brainly.com/question/24386803

#SPJ1

The capacity of the bottle is 1.2 cups of juice.

The capacity of the bottle is the sum of all the volume of juice contained in the bottle and it is calculated as follows;

Total capacity of the bottle = initial volume of the bottle ÷  volume of the cup of juice

2/3 full ------------------> 4/5 cups

100% full = 1 -------------> x

( ²/₃ ) x = ⁴/₅

The total capacity of the bottle is calculated as follows;

Total capacity of the bottle ⇒ ( ²/₃ ) x = ⁴/₅

5 (2x) = 4 (3)

10x = 12

x = 12 / 10

x = 1.2 cups

Thus, the capacity of the bottle is a function of the amount of cups of juice that can fill it.

Learn more about capacity of bottle here: https://brainly.com/question/17120212

#SPJ1

The statement that is true if matter undergoes both chemical and nuclear reaction is that atoms are rearranged (option A).

A chemical reaction is a process, typically involving the breaking or making of interatomic bonds, in which one or more atoms or substances are changed into others.

Also, a nuclear reaction is a process such as the fission of an atomic nucleus, or the fusion of one or more atomic nuclei and/or subatomic particles in which the number of protons and/or neutrons in a nucleus changes.

In a nuclear reaction, the products may contain a different element or a different isotope of the same element.

This suggests that are atoms are rearranged in both chemical and nuclear reactions.

Learn more about nuclear and chemical reactions at: https://brainly.com/question/9566647

#SPJ1

The labeling of blood vessels shown below:

Arterioles are the incredibly small branches of arteries, the blood channels that convey blood out from the heart. Venules, which are incredibly tiny branches that gather blood from numerous organs and body parts, join to create veins, which carry blood back to the heart.

The arteries divide into progressively smaller branches that supply the body's tissues and organs with oxygen and other nutrients. The oxygen and other nutrients enter the cells when the blood passes through the capillaries, while waste products from the cells travel into the capillaries.

Labeling are shown below:

To know more about blood vessels refer to:

https://brainly.com/question/11763276

#SPJ1

The complete question is as follows:

Label the blood vessels using the hints provided. Pterygoid plexus of v Middle meningeal Superficial temporal Maxillary v Facial v Posterior auricular V Reset Zoom.

Astronomers use space telescopes to determine the effects of collisions between galaxies.

A space telescope could be a telescope in outer space utilized to watch astronomical objects. Space telescopes avoid the sifting and distortion of electromagnetic radiation which they observe, and maintain a strategic distance from light pollution which ground-based observatories experience. They are divided into two sorts, such as Satellites which outline the entire sky, and satellites which center on selected galactic objects or parts of the sky and beyond. Astronomy deals with the study of external space. The study centers on planets and other celestial bodies. For the most part, telescopes are utilized to study external space.

To know more about space telescopes refer to the link brainly.com/question/20476135

#SPJ4

which tools do? select the two correct answers. (1 point)

computer simulations

print encyclopedia entries

space telescopes

solar system models

The velocity of the fuel through the nozzle. assume that the fuel filled the entire cross-sectional area of the nozzle. 6.45ft/sq

Velocity is a vector expression of the displacement that an item or particle undergoes with appreciate to time . the usual unit of pace importance (additionally referred to as speed ) is the meter according to 2nd (m/s).

calculation:-

Volume of the fuel pump is V = Avt

V = 687 gallons = 2.6 m³

t = (2.31) 60 × 9

= 1247.4 sec

A = πr²

= 3.141 × (0.0368/2)²

= 0.00106 m³

V = Avt

2.6 m³ = 0.00106 m³ v × 1247.4

V = 1.966 m/s

V = 6.45 ft/sec

Nozzles are used within the rocket and plane engineering to provide jet propulsion, in intensive shattering and spraying technology, in jet gadgets and ejectors and in fuel dynamic lasers and gasoline mills (see gasoline turbine).

Learn more about  cross-sectional area here :-

brainly.com/question/83161

#SPJ4

The wavelength of the electromagnetic wave is 1.58 * 10⁵m. Electromagnetic radiation is made up of electromagnetic field waves that travel through space carrying electromagnetic radiant energy.

Because of their diverse origins and effects on matter, electromagnetic waves of varying frequencies are given different names. Microwaves, radio waves, visible light, ultraviolet radiation, infrared radiation, X-rays, and gamma rays are in the order of increasing frequency and decreasing wavelength.

The relation between the wavelength, frequency, and speed is as follows:

ν = λf

Here, the speed of the electromagnetic wave is ν

Rearrange the above expression to get λ

λ = ν / f

The speed of electromagnetic waves in a vacuum is 3 * 10⁸ m/s.

Substitute 1.9kHz for f and 3 * 10⁸ m/s for ν in the above expression.

λ = ν / f

λ = ( 3 * 10⁸ m/s) / 1.9kHz

λ = ( 3 * 10⁸ m/s) / 1.9kHz (10³ Hz/ 1kHz)

λ = 157894 m

λ = 1.58 * 10⁵m

Thus, the wavelength of the electromagnetic wave is 1.58 * 10⁵m.

Learn more about the electromagnetic wave here:

https://brainly.com/question/3101711

#SPJ4

To balance the seesaw, Jon should sit in the middle, where dJ = 1.7 m

The equation for balancing the moments at the seesaw's center is as follows:

∑Mo = 0

'Mo =

Where:

Mo: Moments in the balance's center(o) added algebraically

Moment of the o point (Mo) (N*m)

force F ( N)

Distance from the force to the origin (in N*m)

Data

mA = 60 kg: Anna's mass mJ = 70 kg:

Jon's mass dA = 2 m:

Anna's distance from the seesaw's center g:

Gravitational acceleration

Calculating the distance (dJ) from Jon to the seesaw's center with ∑Mo = 0 Ana's weight is WA, and Jon's weight is WJ.

W = (mA*g)(dA) - (mJ*g)(dJ) = 0 (mA*g)(dA) - (mJ*g)(dJ) = 0

(mA)(dA) = (mJ)(dJ)

The center where Jon should sit for the seesaw to be balanced is  = 1.7 m.

To know more about  seesaw visit:-

https://brainly.com/question/28566147

#SPJ4

The linear acceleration of the disk is [tex]8.17 m/s^{2}[/tex].

We know that, a rotating disk has two acceleration:

                       Radial acceleration ([tex]a_{r}[/tex]) = ω^2 * r  and  

                       Tangential acceleration[tex](a_{t} )[/tex] = [tex]\alpha r[/tex]

where ω = angular velocity

           [tex]\alpha[/tex] = angular velocity

           r = radius

Given, ω = 4 m/s , [tex]\alpha[/tex] = 3.4 [tex]m/s^{2}[/tex] , r = 0.5m

Putting these values in above equation we get

           [tex]a_{r} = 8 m/s^{2} \\a_{t} = 1.7 m/s^{2}[/tex]

The linear acceleration is given by:

           [tex]a = \sqrt{a_{r} ^{2} + a_{t} ^{2} }[/tex]

Putting respected values in above equation we get a = 8.17 [tex]m/s^{2}[/tex].

So the linear acceleration of the disk is [tex]8.17 m/s^{2}[/tex].        

To know more about rotational mechanics visit:

https://brainly.com/question/13262346?

#SPJ4                  

The rate at which the volume is increasing is dV/dt equals 21.2 cm3/min.

Adiabatic expansion is defined as expansion in which there is no heat exchange between the system and its environment and the system uses its own energy to perform work.

An ideal gas is enclosed in an insulated container and allowed to expand in a vacuum for adiabatic free expansion. The work done by or on the system is 0 because the gas cannot expand because there is no external pressure for it to do so.

This should, I assume, state that PV 1.4 = C.

By applying the chain rule and the product rule to the derivative with regard to time, we arrive at:

[tex]PV^1^.^4[/tex] = C

[tex]\frac{d}{dt} (PV^1^.^4)[/tex] = d/dt( C)

On further solving the derivative we get,

(-7)(4201.4) + (99)(1.4)(4200.4)dV/dt = 0

-32934 + 1552.6dV/dt = 0

dV/dt = 32934/1552.6

dV/dt equals 21.2 cm3/min.

To know more about adiabatic expansion you may visit :

https://brainly.com/question/28212232

#SPJ4

Answer:

1400

Explanation:

because when the 70m long x20m lone will give u 1400 then u time it with 1 that will give u 1400

The quantities di and do are measured from the lens (or mirror): False.

True statement: The quantities of di and do are not measured from the lens (or mirror).

A lens is a piece of transparent material that is typically round in form with two polished surfaces that are either convex (bulging) or concave on one or both sides (depressed). In other words, the radius of curvature is constant since the curves are virtually always spherical.

Lenses are a common component of telescopes, binoculars, and cameras, among other image equipment. Additionally, they are utilized as visual aids in spectacles to treat vision problems including myopia and hypermetropia.

The statement is false.

To know more about lens refer to:

https://brainly.com/question/9757866

#SPJ1

Angular velocity of the microwave in radians per second = 0.6492 rad/s

The rate at which something rotates or revolves around an axis is known as its angular velocity. The Greek letter omega (ω) stands for angular velocity. Because it is expressed as an angle per unit of time, angular velocity in the SI is measured in radians per second.

According to the given information

We need to find the Angular velocity of the microwave in radians per second

For that ,Firstly we will find the frequency

Microwave rotate at the rate of = 6.2 rev/min

                                                    = 6.2/60 rev/s

                                                    = 0.10333 rev/s

Now , we know that

Angular velocity = 2[tex]\pi[/tex]f

                      ω  = 2×3.14×0.10333

                      ω = 0.6492 rad/s

Angular velocity of the microwave in radians per second = 0.6492 rad/s

To know more about Angular velocity

https://brainly.com/question/1980605

#SPJ4

The rotational kinetic energy of an object that is only rotating about a fixed axis through its center of mass is given by E_rot = 1/2 Iω^2, where I is the moment of inertia and ω is the angular velocity.

The rotational kinetic energy of an object is the energy associated with its rotation about an axis. It is equal to one-half the product of the object's moment of inertia and its angular velocity squared.

It is a form of kinetic energy and is usually represented by the symbol Krot. The rotational kinetic energy of an object depends on its moment of inertia and the angular velocity of its rotation. The equation for rotational kinetic energy is Krot= 1/2 Iω2, where I is the moment of inertia and ω is the angular velocity.

For more questions like Rotational kinetic energy click the link below:

https://brainly.com/question/15261931

#SPJ4

Radio is the electromagnetic radiation wavelength is efficiently observed using ground based telescopes. Option A.

In terms of physics, electromagnetic radiation is made up of electromagnetic field waves that travel over space while carrying radiant electromagnetic energy. It consists of X-rays, gamma rays, microwaves, infrared, light, and radio waves. These waves are all a component of the electromagnetic spectrum.

The energy levels of electromagnetic radiation can range from low to high. It consists of x-rays, gamma rays, infrared light, visible light, ultraviolet light, radio waves, and microwaves.

Read more on electromagnetic radiationhere: https://brainly.com/question/1408043

#SPJ1

Weight of the object on planet X is 19.8 N, then the mass of the object on planet x  is calculated to be 2.02 kg.

In physics, gravitational acceleration is the acceleration of an object in ab free fall within a vacuum, without experiencing drag.

When objects fall on the ground, gravity causes them to accelerate. Acceleration is the change in velocity, and velocity is a measure of the speed and direction of motion. Gravity causes an object to fall to the ground much fast and faster is velocity, longer the object takes to fall.

On planet X;

Given, W= 19.8 N ; a= 9.8 m/s^2

W = m a

m= W/a= 19.8/9.8

Mass of the object on planet x = 2.02 kg

To know more about gravitational acceleration, refer

https://brainly.com/question/14374981

#SPJ4

The plantaris works by flexing the knee and ankle joints sporadically. about the foot's position, the central nervous system.

There are numerous ways in which the plantaris tendon might hurt. First, when the plantaris tendon is overworked or overloaded, it might experience tendonitis or tendinopathy. Second, it's hypothesized that the plantaris can chafe and compress on the Achilles tendon, injuring it.

Function. The plantaris functions to plantar flex the knee joint and ankle joint sporadically. The central nervous system may receive proprioceptive feedback information about the location of the foot from the plantaris muscle.

To know more about Plantaris visit:

https://brainly.com/question/29610354

#SPJ4

Maximum distance that it moves down is 26 cm, when block hangs at rest with the spring stretched by 13.0 cm.

In the formula, F = -k x :  k is called the spring constant and is a measure of the spring's stiffness. When a spring is stretched or compressed,  its length changes by an amount x from  equilibrium length, and then it exerts a force F = -kx in a direction towards the equilibrium position.

Given that the equilibrium position is 13 cm below the starting point. As motion is symmetric about the equilibrium position, so the two turning points are 26 cm apart.

13 *2 = 26cm

To know more about spring stretch, refer

https://brainly.com/question/21278956

#SPJ4

Electrical insulators are important because they are used to protect us from electricity.

Learn more about Electrical insulator refer to :

https://brainly.com/question/11845176

#SPJ4

If we are severely dehydrated, ADH levels increases resulting in more concentrated urine.

Low BP means low GFR produced so Renin is increased, high ADH and high aldosterone.

Oxylate used in formation of calcium stones in kidney.

What is ADH?

ADH is also called arginine vasopressin. A hormone produced in the hypothalamus of the brain and stored in the posterior lobe of the pituitary gland. It tells your kidneys how much water to save.

ADH constantly regulates and balances the amount of water in the blood. Higher concentrations of water increase blood volume and pressure. Osmotic sensors and baroreceptors work in concert with ADH to maintain hydrogen metabolism.

Osmotic sensors in the hypothalamus respond to the concentration of particles in the blood. These particles include sodium, potassium, chloride and carbon dioxide molecules. When particle levels are out of balance or blood pressure is too low, these sensors and baroreceptors direct the kidneys to store or release water to maintain a healthy spectrum of these substances. . It also regulates the body's thirst.

Therefore, If we are severely dehydrated, ADH levels increases resulting in more concentrated urine.

Low BP means low GFR produced so Renin is increased, high ADH and high aldosterone.

Oxylate used in formation of calcium stones in kidney.

To know more about ADH, visit:

https://brainly.com/question/28063750

#SPJ4

The sled slows down and eventually stops as a result of the kinetic frictional force that the snow imparts on its runners. The kinetic friction coefficient is 0.050.

The girl and sled together weigh 755 N, with a kinetic friction coefficient of 0.047 between the runners of the sled and the hard, ice snow. 9.81 m per s2 is the acceleration of gravity.

The system determines the SLED as follows if the total shelf life is supplied in the material master record: SLED equals the whole shelf life plus the manufacture date from the GR document.

To know more about sliding  visit:-

https://brainly.com/question/20777311

#SPJ4

Answer:

Explanation:

I think its all of the above

have a good day :)

Answer: Because physics makes us go to the right

Explanation:

A boxer rides with a punch so as to reduce force.

Force is an external influence that can change the velocity or motion of an object.

Force is also the amount of impact the object suffers due to another body's action.

Speed is the rate of change of distance w.r.t time, which cannot affects the boxer in any format

Impulse is force times the time interval which does not defines the impact.

Momentum is the product of mass and velocity which does not satisfies the boxer's condition while punching.

Therefore only force is the suitable answer, i.e. a boxer rides with a punch so as to reduce force.

To know more about force,

https://brainly.com/question/19053790

#SPJ4

If two objects of different temperatures are placed in contact, heat will flow from the object with high internal energy to the object with low internal energy.

Internal energy is the sum total of the kinetic and potential energies of an object. The internal energy of an object depends on the temperature of the object. Heat will flow from an object with a high temperature to an object with a low temperature.

An object having a high temperature will definitely be having high internal energy. Therefore, heat will flow from the object of high internal energy to the object of low internal energy.

To know more about internal energy, visit: https://brainly.com/question/1370118

#SPJ4

It can be said that the speed is v=3.9.0m/s

given data use for calculation:-

Generally the equation for the kinetic energy  is mathematically given as

K.E. = 1/2 m v2

K.E.=1/2*.008*(400*400)

K.E.= 640J

therefore velocity:-

[tex]V^{2}[/tex]= 2*KE/m

V= 3.9 m/s.

The energy an object has as a result of motion is referred to as kinetic energy. If we want to accelerate an object, we must exert force. To apply a force, we must work hard. When the work is done, energy will have been transferred to the item, causing it to move at a new, constant speed.

To know more about kinetic energy visit:-

https://brainly.com/question/15764612

#SPJ4

The binding energy per nucleon of 235-U and 137-Cs is given below:

The binding energy of a nucleus is given by the following equation:

where;

BE is binding energy

Δm is mass defect

c is the speed of light = 931.49 MeV/u

For 235U:

A = 235

Δm  = 1.9150664

BE = 1.9150664  * 931.49 MeV/u

BE = 1783.8648 MeV

The binding energy per nucleon is given by the formula; BE/A

BE/A =  1738.648 MeV / 235

BE/A = 7.6 MeV

For 137-Cs, binding energy will be:

Δm is mass defect = 1.23383 u

BE = 1.23383 u * 31.49 MeV/u = 1149.3003 MeV

And, the binding energy per nucleon, BE/A will be:

And, since in the case of 137-Cs, A is 137;

BE/A = 1149.3003 MeV / 137

BE/A = 8.39 MeV

Learn more about binding energy per nucleon at: https://brainly.com/question/10095561

#SPJ1

Answer:

0.25 J

Explanation:

Speed of the 50th-order maxima on the screen = 0.480 m/s

Given in the question,

Wavelength = 633.0 nm

Dimension of slits = 0.200 mm

Speed of students walking toward the screen = 3.00 m/s

The angle of 50th order fringe =

⇒ d sinθ = mλ

⇒ θ = [tex]sin^{-1}[/tex]( 50λ / d)

The distance x from the slit to the screen and the distance y of the 50th-order fringe from the central maximum is related by tan θ,

tan θ = [tex]\frac{y}{x}[/tex]

As the student comes closer to the screen at speed v, the distances between x and y decrease but their ratio stays the same.

tan θ =[tex]\frac{y}{x}[/tex]

y = x tan θ

[tex]\frac{dy}{dt}[/tex] = [tex]\frac{dx}{dt}[/tex]tan θ

Since [tex]\frac{dx}{dt}[/tex] represents a change in speed so we could assume,

[tex]\frac{dx}{dt}[/tex] = v

[tex]\frac{dy}{dt}[/tex] = -v tan θ

As we can see in the question that the distance is decreasing so the change in distance will also decrease hence = [tex]\frac{dy}{dt}[/tex] will be negative.

[tex]v_{50th-order}[/tex] = |[tex]\frac{dy}{dt}[/tex]| = vtanθ

= vtan[ [tex]sin^{-1}[/tex] (mλ / d) ]

By using this formula we will find the speed of the 50th-order fringe,

[tex]v_{50th-order}[/tex] = (3.00m/s)tan { [tex]sin^{-1}[/tex] [ [tex]\frac{50(633.0 * 10^{-9}m) }{0.200 * 10^{-3} }[/tex] ] }

[tex]v_{50th-order}[/tex] = (3.00 m/s) tan (9.1053)

[tex]v_{50th-order}[/tex] = 3.00 x 0.160

[tex]v_{50th-order}[/tex] = 0.480 m/s

Therefore, speed of the 50th-order maxima on the screen = 0.480 m/s

To learn more about wavelength,

https://brainly.com/question/13692660

#SPJ4