Using two different colors, sketch the paths that the two blocks of ice take during the turn. Assume that friction between the bed of the truck and the ice may be neglected.

The forces acting on the book are: hand on book and earth on book. The forces acting on your hand are: book on hand and earth on hand. the forces "hand on book" and "book on hand" are action-reaction pair.

You hold your physics textbook in your hand. By applying the Newton's third law of action and reaction, we can conclude that:

a) The forces acting on the book are:

   The floor is not in contact with the book, hence, there is no force from the floor on the book

b) The direction of forces in part (a):

c) The forces acting on your hand:

d) The direction of forces in part (c)

e) The action force has the same magnitude as the reaction force, but in opposite direction.

The action-reaction forces are:

Learn more about Newton's law here:

https://brainly.com/question/1430348

#SPJ4

the magnitude (in m/s2) and direction of the plane's average acceleration during this time interval is a = -9 m/s2 in westward direction.

The rate at which velocity changes is called acceleration. Acceleration typically indicates a change in speed, but not necessarily. An item that follows a circular course while maintaining a constant speed is still moving forward because the direction of its motion is shifting.

Include the appropriate variables and the specified values in your writing.

v = 0 m/s and u = 135 m/s

t = 15 s

To calculate the necessary acceleration for the given scenario, write the first law of motion.

At zero speed, v = u + at = 135 m/s + a(15 s) a = -9 m/s2.

The plane is deaccelerating in the opposite direction of motion in this case, as indicated by the negative magnitude of acceleration. As a result, the magnitude in m/ s2 is 9 m/ s2, and the average acceleration of the plane during this time period is westward.

To learn more about average acceleration from given link

https://brainly.com/question/17257675

#SPJ4

An object is at rest if the location versus time graph of the object is a horizontal line.

The right answer is C.

The measurement of a change in speed called acceleration. Most of the time, but not always, acceleration indicates a change in speed. A moving item traveling in a circular path at a constant speed is still moving forward because the trajectory of its own motion is always changing.

A linear quantity called acceleration is used to represent how quickly something changes its momentum. If an object's velocity is changing, it's said to be accelerating. One kind of vector that has both magnitude and direction is velocity. The pace at which speed changes while simultaneously taking direction into account is called acceleration.

To know more about Acceleration visit:

https://brainly.com/question/12550364

#SPJ4

The oxidation state of Ag or the charge on Ag is +1.

The oxidation state of an element is the charge the element would have if all its bonds were covalent. In the case of Ag, it forms an ionic bond with one oxygen atom, Ag+O- => AgO.

The oxygen atom has an oxidation state of -2 and the Ag is +1. To determine the oxidation state, one must understand the ionic charges of the elements in the compound.

The charge of the compound must be equal to zero, so since the oxygen has a charge of -2, the Ag must have a charge of +1. If the compound had more than one of the same element, the oxidation state would be the average of the oxidation states of the atoms.

For more questions like Oxidation state click the link below:

https://brainly.com/question/11313964

#SPJ4

Answer:

Explanation:

Urinary system, reproductive system, and integumentary system

Answer:

Useless body parts include the appendix, the tail bone, and the muscle fibers that produce goose bumps.

All electromagnetic waves are organized into a continuum called the electromagnetic spectrum according to their frequency and wavelength.

The wavelength, which will also apply to troughs, is the separation between two wave crests. The frequency is measured on cycles per second (Hz), which is the quantity of vibrations that cross a specific area in a second (Hertz). In this article, the relationship between frequency and wavelength is covered.

Here are some wavelength examples: Yellow Light is a prime example. The wavelength range of all visible light is 400 to 700 nanometers (nm). The wavelength of yellow light is 570 nanometers or such. Wavelength (nm) (nm)

To know more about wavelength visit:

https://brainly.com/question/13533093

#SPJ4

The property is unique to electromagnetic waves are that they can travel in a vacuum and they can travel on the surface of water.

Unlike mechanical waves, which need a medium to travel, electromagnetic waves can move through air or space. This indicates that electromagnetic waves are capable of passing not only through solid objects like air and rock but also through a vacuum like space.

Electromagnetic waves include those produced by radio and television signals as well as microwaves. The only thing separating them is wavelength. The distance between one wave crest and the next is known as the wavelength.

Learn more about electromagnetic waves here:

brainly.com/question/3101711

#SPJ4

The weight of the automobile is 19.94KN

Weight is the measure of the pull of gravity on an object. It is usually measured in units of mass, such as kilograms (kg) or pounds (lbs).

Depending on the object, the weight can be affected by the environment, including gravity, atmosphere, and other forces.

Weight of the automobile = (4 tires) x (gauge pressure) x (contact area) x (gravitational acceleration)

                                         = (4) x (2.3 105 Pa) x (0.027 m2) x (9.8 m/s2)

                                        = 1.994 x 104 N

                                        = 19.94 kN

Therefore, The weight of the automobile is 19.94KN

To learn more about weight

Here: https://brainly.com/question/229459

#SPJ4

i. Change in angular velocity - When a net torque is applied to a rigid body, it will cause a change in the angular velocity of the body.

Torque is a measure of rotational force or rotational energy. It is defined as the product of the magnitude of the force applied to an object and the perpendicular distance from the point of application to the axis of rotation. Torque is a vector quantity, meaning it has both magnitude and direction. It is measured in units of newton-meters (Nm) or foot-pounds (ft-lbs).

ii. Rotational equilibrium - Rotational equilibrium occurs when the net torque on a rigid body is equal to zero.

iii. Constant angular velocity - A constant angular velocity is not always created when a net torque is applied to a rigid body.

iv. Constant angular momentum - A constant angular momentum is not always created when a net torque is applied to a rigid body.

To learn more about torque
https://brainly.com/question/20691242
#SPJ4

The final momentum of the volleyball is  0.5 kg · m/s .

We have to consider the Second law that was put forward by Isaac Newton. According to the law, the rate of change of the momentum would be directly proportional to the impressed force.

We would now have  momentum   to make use of the law as we know it to be able to obtain the final  of the object. Let us bear in mind that;

Ft = p2 - p1

F = force

t = time

p2 = final momentum

p1 = initial momentum

Then we would  now substitute the values from what we have in the question and have;

150 * 0.01 = p2 - (-1)

150 * 0.01 = p2 + 1

1.5 =  p2 + 1

p2 = 1.5 -1

p2 = 0.5 kg · m/s

Thus the final momentum as we have done the calculation here is  0.5 kg · m/s .

Learn more about momentum:https://brainly.com/question/24030570

#SPJ1

Missing parts;

A volleyball that has an initial momentum of -1.0 ⋅ kg⋅m/s changes direction after a hand hits it with a force of 150 N for 0.01 seconds. What is the final momentum of the object in the figure shown below?

Explanation:

A car travels north on the highway for 125 kilometers, then turns west for 75 kilometers, then makes a u-turn and travels south for 125 kilometers.

A. To determine the displacement of the car, you would need to calculate the final position of the car relative to its initial position. In this case, the car traveled north for 125 km, then west for 75 km, and then south for 125 km. This means the car ends up in the same place it started (125 km south of its starting point), so the displacement would be 0 km.

Anthony has 25 kilograms of sand, while Juan has 60 pounds of sand. To determine which of the two boys has the most amount of sand, we need to convert the weight of the sand from pounds to kilograms. 60 pounds is approximately 27.2 kilograms. So Juan has 27.2 kilograms of sand and Anthony has 25 kilograms of sand. Anthony has more sand.

A horse runs with a velocity of 15 km/hr towards the north for 90 minutes. To determine the displacement of the horse, you would need to calculate the distance traveled by the horse. You can use the formula: Displacement = velocity x time. In this case, the velocity is 15 km/hr and the time is 90 minutes (converted to hours). So, Displacement = 15 x (90/60) = 22.5 km towards the North.

The number of beats that will be heard per second will be 6 beats heard per second.

When two sound waves of slightly different frequencies are combined, the resulting sound wave will have a periodic variation in amplitude, which is known as a beat.

Beats occur when two sound waves of slightly different frequencies are combined. The number of beats per second is equal to the difference in frequency between the two sounds. In this case, the two tuning forks have a frequency difference of 260 Hz - 254 Hz = 6 Hz. Therefore, there will be 6 beats heard per second.

Learn more about  beats here: https://brainly.com/question/28245460

#SPJ4

The magnitude of the charge can be calculated using the equation E = kQ/r^2, where E is the electric field strength, k is the Coulomb's constant (8.99 x 10^9 N·m^2/C^2), Q is the charge, and r is the distance from the charge.

what is strength ?

Strength can be defined as the capacity to endure physical, mental, or emotional stress. It can refer to physical strength, mental strength, or emotional strength. Physical strength is the ability to perform physical activities such as lifting weights, running, or pushing objects. Mental strength is the ability to focus on tasks and stay motivated.

Emotional strength is the capacity to handle difficult situations and to remain calm and composed. Strength is a quality that can be cultivated through practice and hard work. It is an important factor in achieving goals, as well as maintaining a healthy lifestyle. Strength can also be developed by setting and achieving goals, practicing visualization techniques, and engaging in activities that challenge one's mental and physical abilities. Additionally, strength can be developed through positive thinking, self-awareness, and self-discipline.

To learn about mora strength.

https://brainly.com/question/26257705

#SPJ4

When air at 1000 mb is lifted to 700 mb, it will be colder than the surrounding air.

This represents an unstable condition, as the air is not able to stay in its current state and is forced to move up and away from its original position. This creates a situation where the colder air is more dense and is more likely to sink back down towards its original position.

In an unstable condition, the air is constantly moving and shifting, making it difficult to predict what the weather conditions will be.

This condition is considered to be unstable because the air has become less dense than the air around it. As the air rises and cools, the air molecules condense and form clouds which can lead to the development of storms.

To learn more about air, click here:

https://brainly.com/question/636295

#SPJ4

The maximum speed with which the car can round this curve without slipping is 12.35 m/s.

The velocity of a body or object determines its direction of motion. Speed is a scalar quantity in its most fundamental form. Velocity is essentially a vector quantity. It is the rate of change in distance. The displacement change rate is the issue.

Maximum speed restrictions set a ceiling on possible speeds and, if followed, can lessen the disparities in vehicle speeds amongst users of the same road.

The materials being used have an impact on the coefficient of friction. For instance, rubber on the pavement has a high coefficient of friction, which prevents the materials from sliding past one another as readily as ice on steel, which has a low coefficient of friction.

Given:

μ =0.5

Radius (r) = 30.5

g = 10 m/s^2

v^2 = μrg

[tex]v=\sqrt{0.5*30.5*10}[/tex]

[tex]v=12.35m/s[/tex]

To know more about friction visit:

https://brainly.com/question/14121363

#SPJ4

The buoyant force in the increasing order is:

F<A<D<B<C=E

The buoyant force is an upward directed force that acts on any object when it is submerged either partially or completely inside a static fluid.

A body is able to float on the surface of fluid because of the buoyant force acting on the object, which tends to balance the weight of the object. The strength of the buoyant force on an object depends on the mass/volume of the fluid displaced by the object. This principle is known as Archimedes' Principle. According to Archimedes' principle, the buoyant force acting on an object is equal to the weight of the fluid displaced by the object.

The weight of an object is given by the equation:

W=mg

Here,

• m is the mass of the object.

• g=9.8m/s² =9.8m/s² is the acceleration due to gravity.

In terms of the volume, V and density ρ, the above equation becomes:

W=ρVg

It can be seen from the above equation that for a constant, ρ, we have:

W∝V

Therefore, the buoyant force will be proportional to the volume, Vf , of the fluid displaced by the object. Since the volume, Vf of the displaced fluid is equal to the volume of the object submerged inside the fluid, we have:

Vf = Vo∴Fb∝Vo

Therefore, the buoyant force in the increasing order is:

F<A<D<B<C=E

To know more about Archimedes' Principle, visit:

https://brainly.com/question/787619

#SPJ4

The complete question is as follows:

Answer:

The weight of a person with a mass of 68.5 kg on the Moon is 109.6 N.

Explanation:

To find the weight of a person on the Moon, we need to use the formula:

Weight = Mass x Gravitational Force

On the Moon, the gravitational force is 1.6 N/kg. So, using that information:

Weight = 68.5 kg x 1.6 N/kg = 109.6 N

To learn more about Gravitational Force,

https://brainly.com/question/29328661

The spring extends 0.18 meters in total. And choice (4) is accurate.

The spring stiffness is quantified by the spring constant, or k. For various springs and materials, it varies. The stiffer the spring is and the harder it is to stretch, the larger the spring constant.

The force necessary to compress or extend a spring is inversely related to the length extended, according to Hooke's law. Newton's Third Law of Motion states that a spring will return with a restoring force after being pulled. Hooke's Law, which connects spring force to continuous spring force, is followed by this restoring force.

Given information: The spring constant's value is k = 68 N/m.

F = 12 N is the amount of downward force.

The stiffness of spring material is expressed numerically as the spring constant. such that it may be calculated simply dividing the spring force by the stretch distance. It is referred to as Hooke's law.

based on Hooke's law,

F = K × x

x = F /K

x = 12/68

x ≈ 0.18m

To learn more about spring constant from given link

https://brainly.com/question/14962997

#SPJ4

Balmer lines of hydrogen get closer together as you go towards shorter wavelengths due to lesser wavelength and high frequency of blue light, the lines get closer together on going bluer.

However, the visible hydrogen lines or Balmer series are brought about by electron transitions within atoms in the second energy level, or first excited state, which is significantly more energetic than the ground level.

As electrons move between atoms or ions, spectral lines are created. Energy in the form of light (or other radiation) is emitted or absorbed depending on how close or far the electrons are from the nucleus of an atom (or of an ion).

To know more about Balmer lines visit:

https://brainly.com/question/15593991

#SPJ4

"The organelle found in plant cells which is responsible for converting sunlight energy into the chemical energy found in sugar molecules is chloroplast."

The conversion of solar energy into chemical energy through the synthesis of sugar molecules is known as photosynthesis. Only those creatures that have the specific organelle where this procedure takes place experience this process.

Photosynthesis is the process by which solar energy is converted into chemical energy for growth and is an organelle present in the cells of plants and some algae.

The presence of chlorophyll in this double-membrane organelle allows it to absorb solar energy. The chloroplast also has the enzymes required to create sugar molecules using light energy.

To know more about plants:

https://brainly.com/question/14482280

#SPJ4

Sound waves are mechanical waves that require a medium to travel through.

Electromagnetic waves are a form of energy that have both electric and magnetic field components. They are part of the electromagnetic spectrum and are created by the oscillation of electric and magnetic fields. These waves travel at the speed of light and can be transmitted through empty space, solid objects, and even through the human body.

They are created by vibrating objects, and the sound waves travel through the medium, such as air or water, to reach the ear. Electromagnetic waves, on the other hand, are transverse waves that do not require a medium to travel through. These waves are created by oscillating electric and magnetic fields, and they can travel through a vacuum and other materials, such as gases, liquids, and solids. They are also responsible for carrying energy from one place to another.

To learn more about Electromagnetic waves
https://brainly.com/question/13874687
#SPJ4

The dive angle must the submarine make is found to be 25.4 °

a vessel capable of submersion: a nuclear submarine. a command or base for submarines. A wide range of missions, including anti-surface and anti-submarine warfare, information gathering, mine reconnaissance, ground strikes, polar operations, Special Forces support, and guarding other fleet ships, can be carried out by American submarines.

Sin Ф = 0.9/2.1;

Ф=> Sin^-1(0.9/2.1);

   => 25.4°.

For long to four months at a time, submarines can remain submerged more than 600 feet below the surface of the water while continuously patrolling and carrying out secret operations. Although you can't always see them, they are always working under the sea in silence.

Learn more about submarine here:

brainly.com/question/22546376

#SPJ4

When using an oil immersion lens, four procedures can be implemented to achieve maximum resolution: Using a high-quality oil immersion objective lens, Keeping the objective lens clean, Proper focus, Proper oil matching.

1.Using a high-quality oil immersion objective lens: The oil immersion objective lens is the most critical component in achieving high resolution. Using a high-quality, high numerical aperture lens will ensure that the resolution is maximized.

2.Proper oil matching: The type of oil used in the immersion lens needs to have the same refractive index as the cover glass of the microscope slide to achieve maximum resolution.

3.Keeping the objective lens clean: Any dust or debris on the lens can affect the resolution. Regular cleaning of the lens with appropriate solvents will help to maintain maximum resolution.

4.Proper focus: The microscope stage needs to be adjusted so that the objective lens is in the correct position, i.e., in focus, to achieve maximum resolution. This can be done by using the fine focus knob or a focus motor.

By implementing these procedures, the maximum resolution can be achieved with an oil immersion lens.

Additionally, using the oil immersion lens at the highest possible magnification while keeping the sample well illuminated will also help to achieve the best resolution.

To know more about Microscope, visit:

https://brainly.com/question/507443

#SPJ4

A rectangular coil, its dimensions are 20 cms x 10 cms, it consists of 100 turns. It rotates around an axis parallel to its length in a magnetic flux of density 35 x 10 Tesla. A maximum e.m.f. of 4.4 volt was created. The speed with which it rrotates is 0.252 radians/sec

The formula for calculating the speed is given by:

Speed = (e.m.f. x N) / (B x A)

Where e.m.f. = 4.4 volts, N = 100 turns, B = 35 x 10 Tesla, and A = 20 cm x 10 cm = 200 cm2

Speed = (4.4 x 100) / (35 x 10 x 200) = 0.252 radians/sec

Therefore, the correct answer is as given above. It could be calculated that the speed with which it rotates is 0.252 radians/sec.

learn more about speed: https://brainly.com/question/13943409

#SPJ1

In order to determine which two particles have the same centripetal force, we need to know the angular velocity (ω) and the radius of the circular path for each particle.  formula for centripetal force: F = mω^2r.

If two particles have the same value for F, then they have the same centripetal force. Without knowing the angular velocity and radius of the circular path for each particle, we cannot determine which two particles have the same centripetal force.

The apparent outward force that a rotating mass experiences is known as centrifugal force. Imagine a ball being whirled around on a string or the outward motion you experience when driving around a curve. Since the system is not rotating in an inertial frame, there is no outward acceleration.

to know more about centripetal force here:

brainly.com/question/11324711

#SPJ4

Answer:

8.75 ×10^6m²

Explanation:

(35×10^1 × 25 × 10^3)m²

(35×25×10^4)m²

(875×10^4)m²

Answer:

So, 20W of light energy is produced per second.

Explanation:

a) To calculate the current flowing through the bulb, we use the formula:

I = P / V

Where P is the power in watts (100 W) and V is the voltage (220 V).

I = 100 / 220 = 0.45 A

b) To find the light energy produced per second, we use the formula:

E = P x t

Where P is the power in watts (100 W) and t is the time in seconds.

As we know only the power and not the time, we have to calculate the energy efficiency of the bulb.

Efficiency = (Energy output/ Energy input) * 100

Efficiency = (Light energy output / Total energy input) * 100

Let's assume that the bulb is on for 1 sec

Efficiency = (Light energy output / 100W) * 100

Light energy output = (Efficiency / 100) * 100W = 20W

Efficiency = 20%

So, 20W of light energy is produced per second.

Answer:

So, 20W of light energy is produced per second.

Explanation:

a) To calculate the current flowing through the bulb, we use the formula:

I = P / V

Where P is the power in watts (100 W) and V is the voltage (220 V).

I = 100 / 220 = 0.45 A

b) To find the light energy produced per second, we use the formula:

E = P x t

Where P is the power in watts (100 W) and t is the time in seconds.

As we know only the power and not the time, we have to calculate the energy efficiency of the bulb.

Efficiency = (Energy output/ Energy input) * 100

Efficiency = (Light energy output / Total energy input) * 100

Let's assume that the bulb is on for 1 sec

Efficiency = (Light energy output / 100W) * 100

Light energy output = (Efficiency / 100) * 100W = 20W

Efficiency = 20%

So, 20W of light energy is produced per second.

Synergistic Effects is a tenet of airpower The coordinated force across multiple domains produces effects that exceed the contributions of forces used individually.

The application of airpower, according to Air Force doctrine, is refined by several fundamental guiding truths known as tenets. They reflect not only the distinct historical and doctrinal evolution of airpower, but also the current appreciation for its nature. Furthermore, they supplement the joint operations principles you learned about in the previous section by providing more specific considerations for the use of airpower. According to Air Force doctrine, these tenets are interconnected, overlapping, and frequently interlocking. Priorities, for example, necessitate flexibility and versatility. However, the oldest principle of airpower, centralised control and decentralised execution, remains the cornerstone of modern warfare success.

Learn more about  here;

https://brainly.com/question/28683531

#SPJ4

An object is placed at a distance of 40 cm in front of a concave mirror of focal length 20 cm, 11:21 is the ratio of the size of the image and the size of object.

What is focal length?

A narrow lens's focal length in air is calculated by dividing the distance between its primary foci, also called its focal points, from the lens's center. How far a collimated light beam must travel to focus on a single point is determined by the focal length of a converging lens, such as a convex lens, which is positive.

What is concave mirror?

Convex mirrors have curved surfaces that extend outward in the direction of the light source. This projecting surface does not direct light; it merely reflects it.

Therefore, An object is placed at a distance of 40 cm in front of a concave mirror of focal length 20 cm, 11:21 is the ratio of the size of the image and the size of object.

Learn more about focal length from the given link.

https://brainly.com/question/28039799

#SPJ4

The angle from vertical of the axis of the second polarizing filter  unpolarized light with an intensity of 350 W/m² passes first through the polarizing filter with the vertical axis, then through the second polarizing filter and merging from the second filter with an intensity of 126 W/m² = 53°

The notions presented by Malus regarding the intensity of light must be used to answer this question.

According to the law of Malus, intensity is described as:

I' = [tex]\frac{1}{2}[/tex] I₀ cos²∅

The expression for the light's intensity is provided by after the first filter.

I = [tex]\frac{1}{2}[/tex] I₀

= [tex]\frac{1}{2}[/tex] (350 W/m²)

= 175 W/m²

Hence,

I' = [tex]\frac{1}{2}[/tex] I₀ cos²∅

cos²∅ = (2I' / I₀)

∅ = cos⁻¹ ([tex]\sqrt{\frac{(2)(126)}{350} }[/tex])

= 53°

Learn more about polarizing filter here: https://brainly.com/question/29315333

#SPJ4