Earth has coordinates like altitude and azimuth, horizon, and zenith/nadir. Zenith is directly above you 90 degrees from the horizon. Nadir is directly below your feet.
Declination actually has a relation to latitude, as well as being measured in the same units. If you are at the north pole, the north celestial pole would be at your zenith. If you are at the earth's equator, the celestial equator will be at your zenith, at least the part that is culminating on the meridian.
The meridian is where an object moving from east to west reaches its highest point above the horizon, regardless of whether it can reach the zenith or not. When on the meridian, a star with the same declination as your latitude with being at the zenith.
Learn more about earth's equator here:- https://brainly.com/question/13698699
#SPJ4
what is the maximum total force exerted on a astronaut by her seat during the launch of a space shuttle?
The maximum total force exerted on an astronaut by her seat during the launch of a space shuttle is about 3gs.
The weight of the cargo a rocket is carrying determines how much g-force it can generate. A manned mission is constrained by what a human being can withstand. High g-forces can harm the body, and at about 9 gs, most people pass out as their blood struggles to get to their brains. During a rocket launch, astronauts typically feel a maximum g-force of about 3gs. The force of gravity is equivalent to three times what people ordinarily experience on Earth, but the passengers can withstand it. Astronauts undergo high-g training, don g-suits, and need to be properly outfitted.
When a mass accelerates, there is a force (F=ma). While moving at any speed, there is no inherent force that is perceived. Whenever velocity changes, force is sensed. Since the definition of acceleration is the change in velocity over time (dv/dt), we can rewrite the force equation as F=m(dv/dt).
Learn more about the force exerted on the astronauts here:
https://brainly.com/question/19227789?referrer=searchResults
#SPJ4
what is the connection between the variations in the cmb and the large scale structure and dark matter
Because primordial baryonic density fluctuations would have to be extremely large for the vast majority of galaxies we observe in the cosmos to emerge without dark matter, the adiabaticity of CMB fluctuations actually leads to dark matter.
The smooth early Universe and the bumpy older Universe are connected by the CMB. The CMB is fairly homogeneous overall, yet there are small temperature differences or anisotropy. These temperature variations match changes in the universe's matter density at the time the CMB formed.
Up to 90% of the matter in the cosmos may be dark matter or invisible matter. Many astronomers and physicists have proposed a number of explanations for this dark matter. It might just be common material, like dust strewn over the universe, frigid gas, big or small black holes, or ultra-faint stars that produce or reflect too little radiation for our equipment to detect. It might possibly be made up of strange, exotic particles that we are unable to perceive.
Learn more about the dark matter here:
https://brainly.com/question/13121227
#SPJ4
An ice crystal falls vertically from a cloud.
What happens to the acceleration of the ice crystal as it falls?
Answer: It decreases because of air resistance.
Explanation:
A 873-kg (1930-lb) dragster, starting from rest completes a 405.0-m (0.2531-mile) run in 4.913 s. If the car had a constant acceleration, what would be its acceleration and final velocity?
Answer:
Acceleration: approximately [tex]33.56\; {\rm m\cdot s^{-2}}[/tex].
Final velocity: approximately [tex]164.9\; {\rm m\cdot s^{-1}}[/tex].
Explanation:
Let [tex]x[/tex] denote displacement. Let [tex]a[/tex] denote the acceleration of the vehicle. Let [tex]t[/tex] denote the duration of the acceleration. Let [tex]u[/tex] denote the initial velocity of the vehicle.
In this question, it is given that [tex]x = 405.0\; {\rm m}[/tex], [tex]t = 4.913\; {\rm s}[/tex], and [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] since the vehicle started from rest. Acceleration [tex]a[/tex] is to be found.
Since acceleration [tex]a[/tex] is constant, apply the SUVAT equation [tex]x = (1/2)\, a\, t^{2} + u\, t[/tex] and solve for acceleration [tex]a[/tex].
Note that since [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex], the SUVAT equation becomes [tex]x = (1/2)\, a\, t^{2}[/tex].
Rearrange and solve this equation for [tex]a[/tex]:
[tex]\begin{aligned}a &= \frac{2\, x}{t^{2}} \\ &= \frac{2 \, (405.0\; {\rm m})}{(4.913\; {\rm s})^{2}} \\ &\approx 33.558\; {\rm m\cdot s^{-2}}\end{aligned}[/tex].
Let [tex]v[/tex] denote the velocity of the vehicle after the acceleration. Apply the SUVAT equation [tex]v = u + a\, t[/tex] to find this velocity:
[tex]\begin{aligned}v &= u + a\, t \\ &= (0\; {\rm m\cdot s^{-1}}) + (33.558\; {\rm m\cdot s^{-2}})\, (4.913\; {\rm s}) \\ &\approx 164.9\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
a model helicopter pulls into a tight circular curve of radius 30.0 m. the 300 g helicopter is traveling at 90.0 km/h. what is the helicopter's centripetal force?
The centripetal force on the model helicopter is 6.25N.
The radius of the curve of the model helicopter is 30m and the mass of the helicopter is 300g, it is travelling with a speed of 90km/h.
Converting the speed into m/s, speed is 25m/s.
The centripetal force on a body is given by,
F = Mv²/r
Where,
F is the force,
V is the speed,
r is the radius,
So, putting values for helicopter,
F = 0.3 x 25 x 25/30
F = 6.25 N.
So, the centripetal force is 6.25 N.
To know more about Centripetal force, visit,
https://brainly.com/question/20905151
#SPJ4
an object is thrown from an initial height of 45 m with initial speed of 50 m/s. how far does the object travel horizontally before striking the ground?
The object travels horizontally before striking the ground is 1 sec.
Calculation:-
Height = 45 m
speed = 50 m/s
S = ut + 1/2at²
45 = 50×t + 1/2 × 9.8 × t²
T = 1 sec
The rate of trade of function of an item in any path. speed is measured as the ratio of distance to the time in which the space is turned covered. the pace is the gap traveled in line with a unit of time. it is how fast an object is transferring. The pace is the scalar amount that is the significance of the rate vector. It would not have a route. higher pace means an item is transferring faster.
Speed is the gap of a shifting object in a given quantity of time. velocity is a degree of the way speedy something is moving. The common velocity of an object in a sure time is the gap the item traveled divided by the point. The average velocity of the answer is described as the average amount of time it takes for a call center to answer a smartphone name from a patron. protected on this metric is the time a caller waits in a queue.
Learn more about speed here:-https://brainly.com/question/13943409
#SPJ4
Which change will always take place in nuclear fusion?(1 point)
Responses
A nucleus with a greater mass than any of the reactants will be produced.
A nucleus with a greater mass than any of the reactants will be produced.
The total charge will be less than before the fusion took place.
The total charge will be less than before the fusion took place.
The total charge will be greater than before the fusion took place.
The total charge will be greater than before the fusion took place.
A nucleus with a smaller mass than any of the reactants will be produced.
The change that will take place in nuclear fusion is a nucleus with a greater mass than any of the reactants will be produced.
What is Nuclear fusion?The process of nuclear fusion, in which light elements interact to create heavier elements (up to iron). If the interacting nuclei are from low-atomic-number elements, like hydrogen (atomic number 1) or its isotopes deuterium and tritium, significant amounts of energy are released.
Thermonuclear weapons, or hydrogen bombs, which were created in the decade immediately following World War II, were the first to utilize the tremendous energy potential of nuclear fusion. There are two primary types of fusion reactions: those that maintain the number of protons and neutrons and those that entail converting protons and neutrons.
Because of a crucial aspect of nuclear matter called the binding energy, which can be released through fusion or fission, fusion reactions between light elements and fission reactions that split heavy atoms both release energy.
Therefore, a nucleus with a greater mass than any of the reactants will be produced when nuclear fusion takes place.
To know more about Nuclear fusion:
https://brainly.com/question/12701636
#SPJ1
an athlete runs with velocity 12 km/h for 4 minutes, 14 km/h for the next 4 minutes, and 19 km/h for other 5 minutes. compute the total distance traveled.
Total distance travelled by an athlete is approx 4 km.
We have given following information, let the total distance travelled by an anthlete be x km
An athlete runs first part of total distance (x) with a velocity 12 km/ h for 4 minutes.
the next part of x km is travelled by an anthlete with 14 km/h for 4 minutes.
one other part of x km is travelled by an anthlete with 19 km/h for 5 minutes
Change the time units from minutes to hours
1 hour = 60 min => 4 minutes = 4/60 h = 1/15 h
and 5 minutes = 1/12 h
Now use the velocity formula ,
velocity = distance/ time
=> distance = velocity × time
so, total distance (x ) = 12 km/h × 1/15 h + 14 km/h × 1/15 h + 19 km/h × 1/12 h = (12/15 + 14/15 + 19/12)
= 3.91 km ~ 4 km
therefore, total distance travelled by an anthelete is 4km.
To learn more about distance, refer:
https://brainly.com/question/17273444
#SPJ4
A 5.00-N salmon swims 20.0 m upstream against a current that provides a
resistance of 1.50 N. This portion of the stream rises at an angle of 10.0° with
respect to the horizontal. How much work is done by the salmon against
the current?
-30 J of work is done by salmon against the current.
What is work done?In order for an object to move, it must be converted into energy. The transfer of energy can be done in a force way. This amount of energy transferred by the force that moves the object is called work done.
The work done when the force and displacement are opposite is called negative work. example: When you throw an object up, gravity acts downwards and displacement upwards.
W = F × s × cosθ
Where, W = work done
F = force against which work is done (1.5 N)
s = distance travelled (20 m)
θ = 180° since the movement is against the stream of river
W = 1.5 × 20 × cos180
W = 1.5 × 20 × (-1)
W = -30 J
To know more about work done, visit:
https://brainly.com/question/13662169
#SPJ1
when a train increases its velocity, it momentum dreceases?
Answer:
Momentum increases
Explanation:
Momentum = m * v so if mass or velocity increase , so does the momentum
Light-rail systems have been tried all over the country, and they've failed. Although the people who support them have noble intentions, sadly, the system the city proposes is doomed to fail as well. People simply enjoy their cars too much to endure any inconvenience for the sake of the environment. And I don't blame them. As the owner of Jake's Used Cars and Trucks, I have seen the joy and freedom car ownership brings people. Americans will never abandon that feeling for the sake of being slightly better citizens. I believe it is far more responsible to purchase a high-quality car with good fuel efficiency. Building an entire light-rail system from the ground up, as the city proposes to do, will be more wasteful in the end if nobody uses it — not to mention that it will take years to build and cost taxpayers millions of dollars. I encourage all city residents to vote against the light-rail system on May 1. Which statement best describes the author's point of view? A. The author thinks Americans should be more environmentally responsible. B. The author wants citizens to visit his car dealership. C. The author is opposed to the light-rail project. D. The author would like the city to implement its project successfully.
The author's best argument against the light-rail project is that it is unnecessary. A combination of trams characterizes light rail transit, a type of passengers urban rail transportation.
What does light rail accomplish?In big cities, LRT can function as an independent organization or as a complement to heavy rail and passenger rail systems. The fastest and most economical interurban transport in a city is provided by LRT.
What does light rail accomplish?Heavy rail systems can be supplemented by LRT, and commuter rail networks in big cities can function independently. In a metropolitan area, LRT offers the fastest and most affordable interurban transportation service. It is intended to close a considerable gap between light rail and local buses.
To know more about light rail project visit:
https://brainly.com/question/2166229
#SPJ1
A steel wire in a piano has a length of 0.700 0 m and a
mass of 4.300 x 10^-3 kg. To what tension must this wire
be stretched so that the fundamental vibration corre-
sponds to middle C ( f^c = 261.6 Hz on the chromatic musical scale)?
The magnitude of tension must be 3.64 N on the wire.
What is frequency?In physics, frequency is the number of waves that pass a fixed point in a unit of time as well as the number of cycles or vibrations that a body in periodic motion experiences in a unit of time.
Given parameters:
Length of the piano wire: L = 0.700 m.
Mass of the piano wire: m = 4.300 × 10⁻³ kg.
Fundamental frequency of it: f = 261.6 Hz.
We have to find: the tension applied on it T = ?
We know that:
Fundamental frequency is given by:
f = (2π/L)√(T/m)
rearranging the formula, we get:
T = (fL/2π)²m
= ( 261.6 × 0.7000/2π)²× 4.300 × 10⁻³N.
=3.64 N.
Hence, The magnitude of tension must be 3.64 N on the wire.
Learn more about frequency here:
https://brainly.com/question/5102661
#SPJ1
What is the number of paths through which electricity can flow in a series circuit?.
A parallel circuit has more than one path for the current to travel than a series circuit, which has just one.
Why is it called series circuit?The same voltage applied to all components when they are connected in parallel along numerous routes. A series circuit is one with all of its components connected in series, whereas a parallel circuit is one with all of its components connected in parallel.
What makes a series circuit effective?A series circuit offers exactly single route for electric current to go between any two places. The benefit of these circuitry is that they make every component extremely dependent on another component. This implies that removing one component causes the other components to all turn off.
To know more about Series circuit visit:
https://brainly.com/question/11409042
#SPJ1
Here is a table showing the temperatures of some objects and their surroundings. Which object(s) will change temperature fastest? C B A Object A B C Temperature of object (°C) 90 10 60 Temperature of surroundings (°C) 30 18 -12
The temperature of object 60 and temperature of surrounding -12 in °C will have fastest change in temperature.
We need to know about the heat rate to solve this problem. The heat rate depends on the conductivity, surface area, temperature gap, and thickness. It can be written as
H = k . A . ΔT / L
where H is heat rate, k is conductivity, A is surface area ΔT is temperature gap and L is the thickness.
The greater temperature gap leads the object to change its temperature easily.
From the question above, the greater temperature gap is 60 and (-12) in °C where
ΔT = 60 - (-12)
ΔT = 72 °C
Find more on heat rate at: https://brainly.com/question/25677592
#SPJ4
A worker pushes a 50kg box on a level floor at constant velocity and moves a distance of 10 m.
a.) If the person pushes it with a force of 850N, what must be the magnitude and the direction of the frictional force on the surface?
b.) How much work is done on the box (1) by the worker and (2) by friction?
c.) How much work is done by the (1) normal force and (2) by gravity?
d.) What is the total work done on the box?
Pls pakisagutan po ng MAAYOS.
867 Newton must be the magnitude and the direction of the frictional force will be opposite to the surface.
F=µN
µ=F/N
µ=50×10÷50×9.8
µ=1.02
f=µF
f=1.02×850N
f=867 N
IIn mechanics, a force is any action that attempts to sustain, modify, or deform a body's motion. It is common practice to utilize Isaac Newton's three laws of motion to illustrate the idea of force in his Principia Mathematica (1687).
Newton's first law states that in the absence of an external force, a body will continue to be in either its resting or equally moving condition along a straight path. According to the second law, when an outside force applies on a body, the body accelerates (changes velocity) in the force's direction.
To know more about force visit : brainly.com/question/13191643
#SPJ9
PLEASE ASAP HELP WHO EVER IS FIRST I WILL GIVE THANKS LIKE AND POINTS AND STUFF PLEASE ALSO IT HAS TO BE CORRECT
Answer:
its c i had this as home work and got a 100%
Explanation:
Answer:
reupload the photo please
please help ASAP and I need get the independent and dependent variables
The amount of time is the independent variable, while the water phase change is the dependent variable.
What is the independent variable?The independent variable is any variable in the experiment that does not change along the experiment but whose values are associated with the modification in the dependent variable (such as in this case time to observe water phase change).
Therefore, with this data, we can see that the independent variable does not change along the experimental procedure and is known to be the cause of the change in the dependent variable.
Learn more about the independent variable here:
https://brainly.com/question/82796
#SPJ1
a 43- kgkg child stands on the edge of a 270- kgkg playground merry-go-round that is turning at the rate of 1 rev every 2.2 ss . he then walks to the center of the platform. part a if the radius of the platform is 1.5 mm , what is its rotational speed once he arrives at the center?
The rotational speed is 5.8 rad/s.
This is a rotational system related to rotational motion and the system is made up of the merry-go-round and the child, for which we write the moment of two instants
Initial
L₀ = I₀ w₀
Final
L_{f} = I w
L₀ = L_{f}
I₀ w₀ = I_{f} w
.w = I₀/I_{f} w₀
The initial moment of inertia is
I₀ = 0.0011 kg. m2
The final moment of inertia
l_{f} = 0.0011 + m r²
I_{f} = 0.0011 + (43) (1.5)²
I_{f} = 4160.25 kg m²
Initial angular velocity
w₀ = 0.22 rad / s
Let's calculate
rotational speed = (0.0011/4160) 0.22
rotational speed = 5.81 rad / s
Therefore, the rotational speed when the child arrives at center is 5.81 rad/s.
To know more about rotational speed, refer: https://brainly.com/question/6955083
#SPJ4
What happens to the gravitational force between two particles if the distance between them is doubled?.
If the gap between them doubles, the gravitational pull will be reduced to one-fourth of its current strength.
The inverse of the square of the factor that affects separation distance is the factor that affects electrostatic force. Therefore, the electrostatic force is reduced by a factor of four when the separation distance doubles.The square of the distance between the two charges has an inverse relationship with the force's size. As a result, when the gap between two charges is doubled, the attraction or repulsion weakens and drops to one-fourth of its initial strength.The force is smaller the further apart the masses are. The gravitational force does not decrease by half when the distance between two masses is doubled because it is proportional to 1/d2, but rather by 1/4.
To know more about gravitational pull
https://brainly.com/question/29359340
#SPJ4
What is the equation for density d d/m over V?.
The equation for the density is D = m/v.
Density is the substance's mass consistent with the unit of quantity. The symbol most customarily used for density is ρ, despite the fact that the Latin letter D can also be used. Density is the size of ways tightly a cloth is packed together. it's far defined as the mass consistent with unit quantity.
ρ = m/V, wherein ρ is the density, m is the mass of the item and V is the quantity of the object.
The density of a liquid is a measure of how heavy it is for the quantity measured. in case you weigh the same amounts or volumes of two one-of-a-kind beverages, the liquid that weighs extra is greater dense.
The density is of two types, one is absolute density, and the alternative is relative density. Relative density is also called unique gravity, which is the ratio of the density of a material to the density of a reference material. typically, the reference fabric is water.
Learn more about density here:-https://brainly.com/question/6838128
#SPJ4
a rectangular current loop with a clockwise current is in a uniform magnetic field. what is the direction of the net force on the loop?
The direction of the magnetic force on the loop is going inside the loop. If the loop place on the paper, the magnetic force going through the paper.
If a loop of wire is electrified there will be a uniform magnetic field. We use the right-hand rule for loops to calculate the direction of the magnetic field. The rules are
Curl your fingers according to the direction of the current flows.Thumb points in the direction of magnetic force.Imagine a loop on paper. A clockwise current on the loop, curl your fingers, and go in a clockwise direction.
Your thumb gonna points down and the magnetic force going inside the paper.
Learn more about Right-hand rule here: https://brainly.com/question/29331739
#SPJ4
a woman stands on a bathroom scale in a motionless elevator. when the elevator begins to move, the scale briefly reads only 0.87 of her regular weight.
The elevator accelerates with an acceleration of a=-2.45 m/s2 in a downward direction.
What is the speed at which it is accelerating?Any vector's magnitude, represented by its unit and pointing in the direction of the vector, is its length. As a result, the acceleration's magnitude is equal to the length of the acceleration vector and it is pointed in the same direction. For any vector quantity, this is true.
What is the acceleration's direction?Three situations can be distinguished when figuring out the direction of acceleration: when picking up speed, the acceleration is in the direction of movement; when slowing down, the acceleration is in the opposite direction to the direction of movement; and when driving around a corner at a constant speed, the acceleration is in the direction of movement.
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ4
What is generally found behind the drawbridge of a castle?.
An open area between the two buildings is generally found behind the drawbridge of a castle.
A drawbridge is basically a long bridge made up of wood or sometime metal at the entrance of a castle or tower surrounded by a moat. It is basically for the leading to a gateway, capable of being raised or lowered to either restrict entry into the castle or allow someone in it, and often spanned a ditch or moat.
Depending on how big the castle is, when someone go over the drawbridge he or she can generally see an open area, between the buildings. And if we talk about the mechanism behind the drawbridge of the castle a typical arrangement would have the drawbridge immediately outside a gatehouse, consists of a wooden deck with single edge pivoting at the gatehouse threshold, so that in the heighted position the bridge would be flush against the gate, forming passage to entre.
Hence, an open area between the two buildings is generally found behind the drawbridge of a castle.
To know more about drawbridge of a castle here:
https://brainly.com/question/9933174
#SPJ4
an air sample contains 3.5 x 10-6 g/l (grams per liter) of carbon monoxide. how would you express this concentration of carbon monoxide in lb/ft3 (pounds per cubic foot)? note: 1 pound
2.225 x [tex]10^{-7}[/tex] lb/[tex]ft^3[/tex] concentration of carbon monoxide in lb/[tex]ft^{3}[/tex]
Conc. of CO in air = 3.5x[tex]10^{-6}[/tex] [tex]\frac{g}{L}[/tex]
454g = 1 lb
1g = [tex]\frac{1}{454}[/tex] lb
3·5 × [tex]10^{-6}[/tex] g = 1/454 x 3.5 x [tex]10^{-6}[/tex] lb
= 0.007709x[tex]10^{-6}[/tex] lb
= 7.70 x [tex]10^{-9}[/tex] lb
1 L = [tex]10^{3}[/tex] [tex]cm^{3}[/tex]
=[tex]10^{3}[/tex] x [tex](0.3930) ^3[/tex]
=[tex]10^{3}[/tex] x [tex]0.00069 in^3[/tex]
=[tex]10^{3}[/tex] x 0.060 x [tex](0.083ft) ^3[/tex] (1 in = 0.0833ft)
=[tex]10^{3}[/tex] x 0.060 x 0.000571 [tex]ft^3[/tex]
=[tex]10^{3}[/tex] x 6.06 x [tex]10^{-2}[/tex] x 5.71 x [tex]10^{-4}[/tex] [tex]ft^3[/tex]
=34.60 x [tex]10^{-3}[/tex] [tex]ft^3[/tex]
So, 3.5 x[tex]10^{-6}[/tex] g/L = 7.70 x [tex]10^{-9}[/tex] lb / 34.60 x 10
=0.2225 x [tex]10^{-6}[/tex] lb/[tex]ft^3[/tex]
=2.225 x [tex]10^{-7}[/tex] lb/[tex]ft^3[/tex]
Colorless, lethal, odorless, tasteless, and combustible gas with the chemical formula CO, carbon monoxide is a little less dense than air. One carbon atom and one oxygen atom bound together by three bonds make up carbon monoxide. The oxocarbon family's simplest molecule is this one. The carbon monoxide ligand in coordination complexes is referred to as carbonyl. It is a crucial component in numerous industrial chemistry processes.
There are a lot of biological and environmental factors that produce a lot of carbon monoxide as well. It is crucial for the creation of numerous compounds, such as medicines, fragrances, and fuels.
To learn more about carbon monoxide visit here:
brainly.com/question/22530423
#SPJ4
why does the atomic structures determine the properties of a substance?
pls don't search it up i just tried that and it's a different question from mine
which determines whether an atom will receive, lose, and share electrons with other atoms in order to become stable.
Describe three electron-related facts.The outside of the nucleus is surrounded by electrons, which are negatively charged particles. Scientists may have trouble observing them since they rotate so quickly. The tiniest particles in an atom, with 2000 of them fitting into a proton, they are drawn to the protons' positive charge.
Why do electrons matter so much?
In addition to participating in gravitational, electromagnetic, and weak interactions, electrons are crucial for a variety of physical processes, including electricity, magnetism, chemistry, and thermal conductivity.
To know more about electrons visit:
https://brainly.com/question/1255220
#SPJ1
DESCRIPTION
A crane raises a container with
a mass of 1,865 kg to a height
of 17.5 m. What is the GPE of
the container?
calculate the initial volume of NH3 gas at 0°C that is changed to 731 centimeter cube by cooling it to "-14°C" at constant pressure.
The initial volume can be calculated using Charles's law. The initial volume of the ammonia gas was 770 cm³.
What is Charles's law?According to Charles's law, at constant pressure, the volume and temperature of a gas is directly proportional. Thus, v/t = a constant.
V1/T1 = V2/ T2
Given that the final volume and temperature are 731 cm³ and -14 degree Celsius or 269 K respectively. Thus the volume of the gas at 0 degree Celsius or 273 K is :
volume V1 = V2 T1 / T2
= (273 K × 731 cm³ ) /269 K
= 770 cm³.
Thus, the initial volume of the gas was 770 cm³.
To find more on Charles's law, refer here:
https://brainly.com/question/16927784
#SPJ1
WILL GIVE BRAINLIEST!!!! The model represents how electromagnetic radiation transmits energy. f What does the model show? A. An electric field and a magnetic field vibrating parallel to each other B. Two light waves vibrating parallel to each other C. An electric field and a magnetic field vibrating perpendicular to each other D. Two light waves vibrating perpendicular to each other
This model represents how electromagnetic radiation transmits energy and it shows: C. an electric field and a magnetic field vibrating perpendicular to each other.
What is an electromagnetic energy?In Science, an electromagnetic energy can be defined as form of energy that is primarily carried by electromagnetic waves such as:
Gamma raysx-rays.This ultimately implies that, an electromagnetic energy simply refers to a form of energy that typically moves as particles at the speed of light, which is about three hundred million meters per seconds (3 × 10⁸ m/s) and they are always perpendicular to each other.
Based on the model shown in the image attached below, we can logically deduce that a single light wave travels away from a source within an electric field and a magnetic field that are vibrating perpendicular to each other.
Read more on electromagnetic energy here: https://brainly.com/question/20196295
#SPJ1
You are an electrician on the job. The electrical blueprint shows that eight 500-w lamps are to be installed on the same circuit. The circuit voltage is 277 v and is protected by a 20-a circuit breaker. Assuming that the load is continuous, is a 20-a circuit large enough to carry this load?.
The circuit is large enough to sustain the load and has an allowed current load greater than the total current flowing through it. The maximum continuous use current for the circuit is 16 A, or 80% of 20 A.
what's the current equation for physics?How much current is flowing can be calculated to use the electric current formula I=V/R. Ohm's Law serves as the foundation for what is known as the "current equation." I, V, and R are the variables that stand in for current, voltage, and resistance, respectively.
Why do current and electrons exist?Although they move in the same general direction, current and electrons move in different paths. In both directions, electrons can go from a negative to a positive potential. Current is calculated as the quantity of electrons passing through the cross section of a conductor in a second.
To know more about current visit:
https://brainly.com/question/14287268
#SPJ4
A solid silver spoon has a mass of 65.1g.
The volume of the spoon is 6.2cm³.
Calculate the density of silver.
Answer:
10.5
Explanation:
Density= Mass/volume
= 65.1/6.2
= 10.5
