Visit the interactive periodic table and locate the element neon (Ne). Use the information within the square to answer these questions.

Answer:

kinetic energy. (General Physics) the energy of motion of a body, equal to the work it would do if it were brought to rest. The translational kinetic energy depends on motion through space, and for a rigid body of constant mass is equal to the product of half the mass times the square of the speed.

Answer:it is the simplest one

the energy possessed by a body due to its motion is called kinetic energy

K.E.=[tex]\frac{1}{2}[/tex]mv²

Answer:

3.34x10¹⁶ molecules of aspirin are in a drop of blood

Explanation:

The recomended dose of aspirin in blood is 100.0μg/mL =

1x10⁻⁴g aspirin / mL of blood.

In a drop (0.100mL) there are:

0.100mL ₓ (1x10⁻⁴g aspirin / mL of blood) = 1x10⁻⁵g aspirin.

Molecular mass of aspirin is:

9C = 12.01g/mol ₓ 9 = 108.09g/mol

8H = 1.01g/mol ₓ 8 = 8.08g/mol

4O = 16g/mol ₓ 4 = 64g/mol

108.09 + 8.08 + 64 = 180.17g/mol

Thus, moles of aspirin in 1x10⁻⁵g are:

1x10⁻⁵g ₓ (1mol / 180.17g) = 5.55x10⁻⁸ moles of aspirin

In 1 mole, you have 6.022x10²³ molecules, thus:

5.55x10⁻⁸ moles of aspirin ₓ (6.022x10²³ molecules / 1 mole ) =

Explanation:

Copper(II) carbonate basic, CuCO3•Cu(OH)2(s), is the dull green colour that forms on copper roofs. Copper oxidises in the air to form an approximately equimolar mixture of CuCO3 and Cu(OH)2.The percentage of CuCO3 in the

Answer:

The chemical equation needs to be balanced so that it follows the law of conservation of mass.

Explanation:

Explanation:

the chemical equation needs to be balance so that it follows the law of conservation of mass. a balance chemical equation occurs when the number of the different atoms of elements to the reactants side is equal to that of the product side. balancing chemical equation is a process of trial and error .

Answer:

The correct option is;

4 percent ionic, 96 percent covalent, 222 pm

Explanation:

The parameters given are;

Phosphorus:

Atomic radius = 109 pm

Covalent radius = 106 pm

Ionic radius = 212 pm

Electronegativity of phosphorus = 2.19  

Selenium:

Atomic radius = 122 pm

Covalent radius = 116 pm

Ionic radius = 198 pm

Electronegativity of selenium= 2.55  

The percentage ionic character of the chemical bond between phosphorus and selenium is given by the relation;

Using Pauling's alternative electronegativity difference method, we have;

[tex]\% \, Ionic \ Character = \left [18\times (\bigtriangleup E.N.)^{1.4} \right ] \%[/tex]

Where:

Δ E.N. = Change in electronegativity = 2.55 - 2.19 = 0.36

Therefore;

[tex]\% \, Ionic \ Character = \left [18\times (0.36)^{1.4} \right ] \% = 4.3 \%[/tex]

Hence the percentage ionic character = 4.3% ≈ 4%

the percentage covalent character = (100 - 4.3)% = 95.7% ≈ 96%

The bond length for the covalent bond is found adding the covalent radii of both atoms as follows;

The bond length for the covalent bond = 106 pm + 116 pm = 222 pm.

The correct option is therefore, 4 percent ionic, 96 percent covalent, 222 pm.

Answer:

2.5 g of platinum

Explanation:

Recall that a catalyst is a specie added to a reaction system to increase the rate of reaction. A catalyst does not participate in the chemical reaction hence it remains unchanged at the end of the chemical reaction. A catalyst merely provides an alternative reaction pathway by lowering the activation energy of the reaction system. Hence a catalysed reaction usually proceeds faster with less energy requirement than the uncatalysed reaction.

Since the catalyst does not participate in the reactions and remains unchanged at the end of the reaction, the mass of platinum will remain the same (2.5g). The mass can only change if a specie participates in the chemical reaction. Hence the answer.

2.5 g of platinum will there be left in the vessel at the end of the reaction

The following information should be considered:

learn more: https://brainly.com/question/2514933?referrer=searchResults

Answer:

The Healthcare system should be a welcome place to the different tiers of people in the society. There should be zero form of discriminations and everyone should be should be treated in the same way. Defaulters should be frowned at and adequate punishments should be meted out. There should be strict accountability of the funds made available to the healthcare centers to prevent diversion and any corrupt practices. These systems need to be in place to ensure fairness in healthcare.

Answer:

Industrial activity increases the emission of greenhouse gases in the atmosphere, especially carbon dioxide (CO2), and it negatively affects climate by increasing global warming.

Two actions to face the global warming:

1- To substitute the use of fossil fuels by alternative clean energy sources such as, for example, hydroelectric, geothermal, solar and wind energy resources.  

2- The government's policies decided to develop electric cars and to stimulate healthy habits such as walking instead of the use of conventional fossil-fueled transport modes.

Answer:

d. 0.9 mol

Explanation:

On this case we have to start with the formula of acetylene:

[tex]C_2H_2[/tex]

Now we can write the chemical reaction of combustion:

[tex]C_2H_2~+~O_2~->~CO_2~+~H_2O[/tex]

The next step is to balance the reaction:

[tex]2C_2H_2~+~5O_2~->~4CO_2~+~2H_2O[/tex]

The molar ratio between [tex]C_2H_2[/tex] and [tex]CO_2[/tex] is 2:4, so:

[tex]0.3~mol~C_2_H_2\frac{4~mol~CO_2}{2~mol~C_2H_2}=0.6~mol~CO_2[/tex]

The molar ratio between [tex]C_2H_2[/tex] and [tex]H_2O[/tex] is 2:2, so:

[tex]0.3~mol~C_2_H_2\frac{2~mol~H_2O}{2~mol~C_2H_2}=0.3~mol~H_2O[/tex]

The total moles would 0.6 + 0.3=0.9 moles.

I hope it helps!

Answer:

first answer

Explanation:

atomic number of bromine is 35

[tex]1{s}^{2} 2 {s}^{2} 2 {p}^{6} 3 {s}^{2} 3 {p}^{6} 3 {d}^{10} 4 {s}^{2} 4 {p}^{5} [/tex]

Answer:

1s22s22p63s23p64s23d104p5

Explanation:

;)

Answer:

Some things you could do are recycle more, contribute to organizations that support saving the environment, finding alternate transportation methods such as riding a bike or walking, and finally, you could volunteer.

Answer:

Calcium chloride

Explanation:

Sublimation is the process whereby a solid substance is converted to gas when heat is applied or when exposed to an environment with a higher temperature.

Solid normally gets converted to the liquid phase before reaching the gaseous phase but these substances gets converted from solid straight to gas

Solid—> Gas

Dry ice( solid CO2) and Ammonium chloride undergo sublimation while Calcium chloride doesn't.

Answer:  [tex]C_6H_{14}[/tex] is a hydrocarbon.

Explanation:

Alcohols are the compounds which contain -OH as the functional group. Example: [tex]CH_3OH[/tex]

Amine are the compounds which contain [tex]-NH_2[/tex] as the functional group. Example: [tex]CH_3NH_2[/tex]

Ether are the compounds which contain [tex]ROR[/tex] as the functional group. Example: [tex]CH_3OCH_3[/tex]

Hydrocarbons are defined as the compounds in which bonds are present between carbon and carbon atoms. Hydrocarbons with single bond between carbon and carbon atoms are called as alkanes.The general formula for alkanes is [tex]C_nH_{2n+2}[/tex] Example: [tex]C_6H_{14}[/tex] which is named as hexane.

Answer:

D) Hydrocarbon

Explanation:

Completed the test and got it right

Answer:

Im not sure what you mean but I hope what I wrote helps you!

The Law of Conservation of Matter says that the amount of matter stays the same, even when matter changes form. Sometimes it may seem that matter disappears during a science experiment, but this law tells us that matter cannot magically appear or disappear, it simply changes from one form to another.

Explanation:

Answer:

To separate an insoluble solid from a soluble solid: Mixing the mixture with water, filtering out the insoluble solid, and then evaporating the water to isolate the soluble solid.

Explanation:

Answer:

Mixing the mixture with water, filtering out the insoluble solid, and then evaporating the water to isolate the soluble solid

Answer:

Every species is made of different elements.

Explanation:

Living organisms are classified by their species. Species refer to a group of closely related individual organisms which are callable of interbreeding with each other and exchanging genetic material.

Member of a species have similar genetic make up and often look alike, it is the lowest taxonomic rank of closely related organisms.

Members of of different species are often composed of different elements. Since individual organisms are members of a given species, we can say that every species of organisms are made up of different elements.

Answer:

C7H16 + 11O2 = 7CO2 + 8H2O

Explanation:

Start by balancing the C and H in C7H16 by adding the coefficient of 7 for CO2 because there are 7 C's in C7H16. Similarly, since there are 16 H's in C7H16, balance it by adding the coefficient of 8 to the H2O, which will result in 16 H's.

Finally, add up the O's on the right side and balance it by adding the appropriate coefficient on the O2. On the right, there are 22 O's, so balance the equation by adding the coefficient of 11 on the left for the O2.

Answer: 211.2 grams

Explanation:

To calculate the number of moles for given molarity, we use the equation:

[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}}{\text{Volume of solution in L)}}[/tex]     .....(1)

Molarity of [tex]KBr[/tex] solution = 1.7 M

Volume of solution = 3.5 L

Putting values in equation 1, we get:

[tex]1.7M=\frac{\text{Moles of}KBr}{3.5L}\\\\\text{Moles of }KBr=\{1.7mol/L\times 3.5L}=5.95moles[/tex]

The balanced chemical reaction is:

[tex]Cl_2+2KBr\rightarrow 2KCl+Br_2[/tex]

According to stoichiometry:

2 mole of KBr requires = 1 mole of [tex]Cl_2[/tex]

5.95 moles of KBr requires = [tex]\frac{1}{2}\times 5.95=2.975[/tex] moles of [tex]Cl_2[/tex]

Mass of [tex]Cl_2=moles\times {\text {Molar mass}}=2.975mol\times 71g/mol=211.2g[/tex]

Thus 211.2 grams of chlorine gas are needed to react with 3.5 liters of a 1.7 molar potassium bromide solution

Answer:

C. the substance in which the solute dissolves

Explanation:

There are two terms in this... the solute and the solvent. The way I learned how to remember this is with a little pirate analogy: The loot (stolen treasure) always goes in the vent. So, the soLUTE goes in the solVENT.

Answer:

Your question is somewhat poorly worded, even so what I can contribute is the statement is false, since the salt is sodium chloride, where its severe chemical formula NaCl, is a SALT not an acid and if it dissolves in water, seriously the solute of a solution, where water plays the role of the solvent

Explanation:

Sodium chloride is a binary salt, very easy to dissolve in water, it is also called the famous table salt, since it can be ingested in food even though it is not so recommended against high blood pressure conditions.

Answer:

In order to take steps by humans for controlling the change in climate.

Explanation:

It is important that scientist find out the change which occurs in the climate with the passage of time by performing experiments and also repeat the experiments in order to verify their findings. Due to these experiments, scientists also find out the reasons behind of climate change which enable us to take steps in preventing the change that occurs in the environment. it is also important for scientists to be able to explain how they know that climate has changed over time in order to explain that he is not assuming or making predictions, he has to provide evidence for his statement which is only be possible through experiments.

Answer:

The vapor pressure due to water in a sample can be corrected for in order to get the true value for the pressure of the gas.

Explanation:

Answer:

Sodium (Na) — Will lose electrons

Silicon (Si) — Will lose electrons

Argon (Ar) — No reaction

Hope this helps.

Answer:

Minerals

Explanation:

I looked it up on google. Thanks.

Answer: 1. There are [tex]0.20\times 10^{23}[/tex] molecules of sulfuric acid  in the solution.

2.  0.093 moles of baking soda have been used.

Explanation:

According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.

To calculate the moles, we use the equation:

1. [tex]\text{Number of moles of sulpfuric acid}=\frac{\text{Given mass}}{\text {Molar mass}}=\frac{3.2g}{98g/mol}=0.033moles[/tex]

1 mole of [tex]H_2SO_4[/tex] contains = [tex]6.023\times 10^{23}[/tex] molecules of sulfuric acid

Thus mole of [tex]H_2SO_4[/tex] contains = [tex]\frac{6.023\times 10^{23}}{1}\times 0.033=0.20\times 10^{23}[/tex] molecules of sulfuric acid

There are [tex]0.20\times 10^{23}[/tex] molecules of sulfuric acid  in the solution.

2.  [tex]\text{Number of moles of baking soda}=\frac{\text{Given mass}}{\text {Molar mass}}=\frac{7.8g}{84g/mol}=0.093moles[/tex]

0.093 moles of baking soda have been used.

______________________________

Solution,

Mass=500g =500/1000=0.5 kg

gravity(g)=9.8m/s^2

Now,

Weight= m*g

= 0.5*9.8

=4.9 N

So the weight of the block is 4.9 Newton

hope it helps...

Good luck on your assignment

_______________________

alkali metals

a.pex

yes