Answer:
Below!
Explanation:
Isotopes are elements with a similar chemical makeup and the same atomic number, but a different atomic mass and number of neutrons . An example of this would be carbon-12, carbon-13, and carbon-14. Three isotopes of the element carbon that have the same 6 protons but have a different neutron count. A simple way to explain isotopes would be to say that they are just different "versions" of an element.
Hope this helps ya! Best of luck <3
3. Classify the following plants along with two main characteristics: al Cycus b) Bamboo c) Lemna d) Paddy a) Sugarcane f) Pinus g) Mango b) Mustard
Answer:
A. cycas
1. it is thick and scaly
2. it grow relatively slowly and have a large, terminal rosette of leaves.
B. bamboo
1. it is very durable
2. it is both flexible and elastic
C. lemna
1. it grows as simple free-floating thalli on or just beneath the water surface
2. it are small, not exceeding 5 mm in length
D. paddy
1. it is variety purity
2. it degree of purity
E. sugarcane
1. it is bear long sword-shaped leaves
2. it's stalks are composed of many segments, and in each joint there is a bud
Aspirin (C9H8O4) is produced from salicylic acid (C7H6O3) and acetic anhydride (C4H6O3):
C7H6O3 + C4H6O3 -----> C9H8O4 + HC2H3O2
(a) How much salicylic acid is required to produce 1.5 x 10^2 kg of aspirin, assuming that all of the salicylic acid is converted to aspirin? (b) How much salicylic acid would be required if only 80% of the salicylic acid is converted to aspirin? (c) What is the theoretical yield of aspirin of 185 kg of salicylic acid is allowed to react with 125 kg of acetic anhydride? (d) If the situation described in part (c) produces 182 kg of aspirin, what is the percentage yield?
Explanation:
the equation is yes a the line of jointing line passing the ball to is
H2O decomposes to hydrogen and oxygen as describe in the
following reaction:
2H20 (1) ► 2H2 (9) + O2 (9)
What is the mole fraction of hydrogen gas in the products?
a 0.5
b 0.33
C 0.4
d 0.67
Can someone help me with this please
That is an ionic bond.
Explanation:
It has cations and anions
Name the 4 properties of waves.
Answer:
the 4 properties of waves are frequency, amplitude, wavelength, and speed.
Explanation:
What does an atom's period tell us?
Answer:
A horizontal row in the periodic table, which signifies the totoal number of electron shells in an element's atom.
Explanation:
Hope this helpss)):
31.) How far can a rock fly(meters). if the slingshot has a total potential of 500 Joules, and when releasing the slingshot exerts a total amount of 25 Newtons?
Whats the best red waterproof lipstick? Need some help :)
[tex][tex]\blue{\rule{40pt}{900000000pt}}[/tex][/tex]
In a chemical change energy can be ___?
A. Created but not destroyed
B. Either created or destroyed
C. Destroyed but not created
D. Neither created nor destroyed
Answer:
chemical change energy can neither be created nor destroyed.
Explanation:
the rule of law of conversion states that energy can only be converted from said energy to another. it cannot be created and destroyed.
Answer:
D. Neither created nor destroyed
Explanation:
The law of conservation of energy states that energy is neither created nor destroyed.
1. What is the Speed equation?
a. S= D/T
c. A= Fv-lv/T
b. A= lv - FIT
d. S= T/D
Answer:
A
Explanation:
distance over time is speed's equation
Which statement correctly describes the relationship between molecular structure, the strength of electrostatic forces between
molecules, and the boiling point of a substance? (1 point)
The boiling point of a substance affects the strength of electrostatic forces, which can affect the molecular
structure
The boiling point of a substance affects its molecular structure, which can affect the the strength of
electrostatic forces.
Molecular structure affects the strength of electrostatic forces, which can affect the boiling point of a
substance
Stronger electrostatic forces cause a stronger molecular structure and lower boiling points
Molecular structure affects the strength of electrostatic forces, which can affect the boiling point of a substance is the statement that correctly describes the relationship between these terms.
The molecular structure is the way in which the atoms that are in a molecule are arranged in space, this is defined by a series of forces that hold the atoms together in a specific arrangement.
The boiling point is the temperature at which the vapor pressure of the liquid equals the pressure that surrounds the liquid, when this happens, the liquid transforms into gas.
For a compound to vaporize, the forces that hold the molecules together must be broken, this means that the boiling point of a compound depends on the attraction between the molecules, that is, on the forces that determine the molecular structure.If the molecules are held together by strong electrostatic forces, it will take a lot of energy to push the molecules away from each other and the compound will have a very high boiling point.Therefore, we can conclude that the boiling point depends on the molecular mass of the substance and the type of electrostatic forces present, that is, the bonds that the atoms establish with each other to form the molecule (molecular structure).
Learn more about molecular structure here: https://brainly.com/question/25799404
50 POINTS!!!! PLEASE HELP I AM BEGGING!!!!!!
3CH4 and C3H12 have the same number and kind of elements. How are they different?
what is the chemistry between us?
A calcium atom has 20 protons, 20 electrons, and 20 neutrons. When calcium forms a positive two ion it's new composition is
Answer:
40
Explanation:
I'm not sure
7) Element Families on the Periodic Table have similar _____________________. There are ________ Families.
8) Alkali Metals are good conductors of _____________________________ and ________________________________.
9) There are a total of _________ elements that are grouped as Transition Metals.
10) As opposed to metals, non-metals can be very __________________________. They have no metallic ____________
and do not reflect ______________________.
11) All Lanthanide Series elements occur naturally except for ___________________________________.
12) All Actinide Series elements are ___________________________ and most are _____________________
The periodic table is composed of metals and nonmetals arranged in groups and periods.
The periodic table is an arrangement of elements in groups and periods based on their properties. The properties of elements repeat at regular intervals hence the term, "periodic".
The answers to the questions are;
7) Element Families on the Periodic Table have similar properties. There are 18 families.
8) Alkali Metals are good conductors of heat and electricity.
9) There are a total of 38 elements that are grouped as Transition Metals.
10) As opposed to metals, non-metals can be very opaque. They have no metallic luster and do not reflect light.
11) All Lanthanide Series elements occur naturally except for promethium.
12) All Actinide Series elements are radioactive and most are synthetic.
Learn more about the periodic table: https://brainly.com/question/24719506
Conversion of units of temperature
Answer:
1. -5
2. 88.7
3. -23.3333
4. 126.5
5. 69.8
6. 30.61111
7. 118.4
8. 275
9. 94.82
10. 44.6
Explanation:
Answer:
here you go
Explanation:
1.-5
2.88.7
3.23.333
4.126.5
5.69.8
6.30.6111
7.118.4
8.275
9.94.82
10.44.6
8) (When allyl alcohol dissolves in water, the particles of allyl alcohol
a. remain intact.
b. react with water.
C. react with water forming solvated atoms.
d. react with water forming solvated ions.
9) The hydrogen bonding interaction between particles of allyl alcohol and water
occurs between the hydrogen atom of water
a. and the oxygen atom of allyl alcohol.
b. and the hydrogen atom of allyl alcohol that is covalently bonded to the oxygen atom.
c. and the hydrogen atom of allyl alcohol that is covalently bonded to the carbon atom.
d. Actually, hydrogen bonding is NOT the intermolecular force between allyl alcohol and
water
10) The hydrogen bonding interaction between particles of allyl alcohol and water
occurs between the oxygen atom of water
a. and the oxygen atom of allyl alcohol.
b. and the hydrogen atom of allyl alcohol that is covalently bonded to the oxygen atom.
C. and the hydrogen atom of allyl alcohol that is covalently bonded to the carbon atom.
d. Actually, hydrogen bonding is NOT the intermolecular force between allyl alcohol and
water
Hydrogen bonding interaction occurs between the oxygen atom of water and the hydrogen atom of allyl alcohol that is covalently bonded to the oxygen atom.
We must recall that allyl alcohol is a molecular substance. Molecular substances do not dissociate into ions in water. As such particles of allyl alcohol remain intact when dissolved in water.
Hydrogen bonding occurs when hydrogen is bonded to an electronegative atom such as oxygen. In allyl alcohol, hydrogen bonding interaction occurs between the hydrogen atom of water and the oxygen atom of allyl alcohol.
Also, hydrogen bonding interaction occurs between the oxygen atom of water and the hydrogen atom of allyl alcohol that is covalently bonded to the oxygen atom.
Learn more: https://brainly.com/question/865531
Ores contain enough metal to make extraction of the metal ______
economical.
reversible.
carbon neutral.
Answer:
oxide
Explanation:
which is the best reason given to explain why metals make good electrical conductors?
Answer: Metals are an excellent conductor of electricity and heat because the atoms in the metals form a matrix through which outer electrons can move freely.
Explanation:
silver has an atomic mass of 107.868 amu. silver has two common isotopes. one of the isotopes has a mass of 106.906 amu and a relative abundace of 51.881%. a. what is the % abundance of the other isotope. b. what is the mass if the other isotope.
A. The abundance of the 2nd isotope is 48.119%
B. The mass of the 2nd isotope is 108.905 amu
Let the 1st isotope be A
Let the 2nd isotope be B
A. Determination of the abundance of the 2nd isotope
Abundance of isotope A = 51.881%.
Abundance of isotope B =?Abundance of B = 100 – A
Abundance of B = 100 – 51.881
Abundance of B = 48.119%B. Determination of the mass of the 2nd isotope
Atomic mass of silver = 107.868 amu.
Mass of 1st isotope (A) = 106.906 amu
Abundance of isotope A (A%) = 51.881%.
Abundance of isotope B (B%) = 48.119%
Mass of 2nd isotope (B) =?[tex]atomic \: mass = \frac{mass \: of \:A \times \:A\%}{100} + \frac{mass \: of \:B \times \:B\%}{100} \\ \\ 107.868 = \frac{106.906\times \ \: 51.881}{100} + \frac{mass \: of \:B \times \:48.119}{100} \\ \\ 107.868 = \: 55.464 + 0.48119 \times mass \: of \:B \\ \\ collect \: like \: terms \\ \\ 0.48119 \times mass \: of \:B = 107.868 - 55.464 \\ \\ divide \: both \: side \: by \: 0.48119 \\ \\ mass \: of \:B = \frac{107.868 - 55.464 }{0.48119} \\ \\ mass \: of \:B =108.905 \: amu \\ \\ [/tex]
Therefore, the mass of the 2nd isotope is 108.905 amu
Learn more: https://brainly.com/question/7955048
A horticulturalist wants to produce geraniums with specific characteristics.
She knows that the trait of red flowers is governed by the allele R (RR and Rr) and the trait of white flowers is governed by the allele r(rr).
The horticulturalist crosses two geraniums from the F1 generation.
Look at the Punnett square to see this cross.
R r
R RR Rr
r Rr rr
Which ratio of red-to-white flowering plants would she expect to see in the phenotypes of the F2 generation?
all red
3 red : 1 white
1 red : 3 white
2 red : 2 white
Yo,
In Geranium plant life red vegetation is given by using the allele R this is dominant (so RR or Rr ) genotype will produce crimson plant life.
If we communicate approximately the connected punnet square which i took from the workout e book, you could see that there was a cross made among vegetation with heterozygous genotype for red flora.
P1: Rr X Rr
Gametes: R: r : R : r
F1: RR: Rr: Rr: rr
so there is three: 1 in F1 offspring for red to white plant life.
Now the query is set f2 technology, while we cross F1 generation suppose we do a move of Rr and rr from F1 generations allow us to see what takes place.
F1: Rr: rr
Gametes: R: r: r: R
F2 : Rr : rr: Rr: rr
Rr: purple flowers
rr: White flora:
So the ratio in F2 era might be 2 crimson : 2 white. Please see connected punnet squares (first one for query) and the second of F1 move for better know-how.
I'm hoping that this will benefit you, so from my assumption and study it'd be 2 crimson : 2 white, if this is indeed the one i'm thinking of since nothing else was provided, if not please correct me.
Answer: 2 red : 2 white
Explanation:
I know
If you wanted to make a crucible for melting sodium (Na), which metal would be most suitable for that purpose
To make a crucible for melting sodium (Na), metals that would be most suitable for that purpose are inert metals or metals like alumina.
What are inert metals?inert metals are those metals that do not react with other highly reactive metals or in the atmosphere due to the absence of one free electron in the outermost orbital.
The sodium metal is kept in the crucible of the inert metal like alumina because sodium has one free electron in the outer shell and catches fire as come into the contact with the air.
Therefore, to make a crucible for melting sodium (Na), metals that would be most suitable for that purpose are inert metals or metals like alumina.
Learn more about inert metal, here:
https://brainly.com/question/14546209
#SPJ6
The compound of ammonium sulfate consists of two ions. NH4+ and SO42- both of which are polyatomic ions. a molecule of the compound consists of (one, two , or four) NH4+ ions and (one, two, or four) SO42- ions?
Answer:
Blank #1: Polyatomic
Blank #2: 2 (see explanation)
Blank #3: 1 (see explanation)
Explanation
Both the ammonium ion and the sulfate ion contain more than one atom in each ion. The two species are thus polyatomic. The chloride ion , for example, is monoatomic.
Superscripts above formulae of the ions indicate their charge. Each ammonium ion carries a positive one (+1) charge. Each sulfate ion carries a charge of negative two (-2).
Ammonium sulfate is an ionic compound. A sample of this compound contain myriads of ammonium ions and sulfate ions. The ions are packed in three-dimensional lattices. Thus unlike water, ammonium sulfate does not exist as molecules in nature.
Assuming that the second and third blanks refers to a formula unit, rather than a molecule, of ammonium sulfate. The empirical formula of ammonium sulfate gives the minimum whole-number ratio between the two ions in a sample.
Charges shall balance between the two ions. Ammonium ions are of charge +1. Sulfate ions are of charge -2. The sample shall thus contain two ammonium ions for every one sulfate ion.
The empirical formula of ammonium sulfate is therefore .
There are thus two ammonium ions and one sulfate ion in each formula unit of ammonium sulfate.
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, a molecule of the ammonium sulfate consists of one NH₄⁺ ions and one SO₄²⁻ ions.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond. The compound of ammonium sulfate consists of two ions. NH₄⁺ and SO₄²⁻ both of which are polyatomic ions. A molecule of the ammonium sulfate consists of one NH₄⁺ ions and one SO₄²⁻ ions.
Therefore, a molecule of the ammonium sulfate consists of one NH₄⁺ ions and one SO₄²⁻ ions.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ2
Which compound contains both sigma and pi bonds? HCCl3 H2CO H2S HBr.
The compound that contains both sigma and pi bonds has been [tex]\rm \bold{H_2CO}[/tex]. Thus, option B is correct.
The compounds have been resulted by the sharing of the valence electrons between atoms, for the completion of octet of each elements.
The bonds can be saturated with the presence of only sigma bond. The unsaturated bonds has presence of pi bonds as well. The bond with one pi and one sigma has been a double bond, while 1 sigma and 2 pi has been a triple bond.
The bonds present in the following structures has been:
[tex]\rm HCCl_3=4\;\sigma\;bonds\\H_2CO=2\;\sigma,\;1\;\pi\;bond\\H_2S=2\;\sigma\;bonds\\HBr\;=1\;\sigma\;bond[/tex]
The compound with the presence of both sigma and pi bonds has been [tex]\rm \bold{H_2CO}[/tex]. Thus, option B is correct.
For more information about the sigma and pi bonds, refer to the link:
https://brainly.com/question/14018074
copper cannot be used as an anode in electrolysis of water
Answer:
I hope this will help
Explanation:
Copper is purified by electrolysis . Electricity is passed through solutions containing copper compounds, such as copper(II) sulfate. The anode (positive electrode ) is made from impure copper and the cathode (negative electrode) is made from pure copper.
A gas in a rigid container at 25°C has a pressure of 0. 96 atm. A change in temperature causes the pressure to increase to 1. 25 atm. What is the new temperature of the gas? Use StartFraction P subscript 1 over T subscript 1 EndFraction equals StartFraction P subscript 2 over T subscript 2 EndFraction. â€""44. 2°C 32. 6°C 115°C 388°C.
The new temperature of the gas is 115 °C
From the question given above, the following data were obtained:
Initial temperature (T₁) = 25 °C = 25 + 273 = 298 K Initial pressure (P₁) = 0.96 atmNew pressure (P₂) = 1.25 atmNew temperature (T₂) =?The new temperature of gas can be obtained as follow:
[tex] \frac{P_1}{T_1} = \frac{P_2}{T_2} \\ \\ \frac{0.96}{298} = \frac{1.25}{T_2} \\ \\ cross \: multiply \\ \\ T_2 \times 0.96 = 298 \times 1.25 \\ \\ divide \: both \: side \: by \: 0.96 \\ \\T_2 = \frac{298 \times 1.25 }{0.96} \\ \\ T_2 = 388 \: K \\ \\ subtract \: 273 \: from \: 388 \: to \: express \: the \: answer \: im \: \degree \: C \\ \\ T_2 = 388 - 273 \\ \\ T_2 = 115 \: \degree \: C [/tex]
Therefore, the new temperature is 115 °C
Learn more about gas laws: https://brainly.com/question/25862018
A 0.03 mol sample of NH4NO3 (s) is placed in a 1 L evacuated flask, which is then sealed and heated. The NH4NO3 (s) decomposes completely according to the balanced equation above. The total pressure in the flask measured at 400 K is closest to which of the following? (The value of the gas constant, R, is 0.082 L atm mol-1 K-1.)
a. 3 atm
b. 1 atm
c. 0.5 atm
d. 0.1 atm
e. 0.03 atm
The total pressure in the flask measured at 400 K is 1 atm
The correct answer to the question is Option B. 1 atm
From the question given above, the following data were obtained:
Number of mole (n) = 0.03 mole Volume (V) = 1 L Temperature (T) = 400 KGas constant (R) = 0.082 atm.L/Kmol Pressure (P) =?Using the ideal gas equation, we can obtain the pressure in the flask as follow:
PV = nRT
P × 1 = 0.03 × 0.082 × 400
P = 1 atmTherefore, the total pressure in the flask measured at 400 K is 1 atm
Learn more on ideal gas equation: https://brainly.com/question/4147359
Answer: a: 3 atm
Explanation:
0.03 mol NH4NO3 decomposes into 0.09 mol of gas total, thus we multiply 0.09 by 0.082 and 400K to get our answer of about 3 atm.
Select all the statements that correctly describe a solution. Multiple select question.
A. A solution is a mixture of substances dissolved in water.
B. A solution may have more than one solute.
C. Not all solutions are liquid.
D. A solution is a homogeneous mixture of two or more substances.
E. The solute is the substance present in the largest quantity.
Answer:
B, D, C
Explanation:
the solution may have more than one solute, a solution is a homogenous mixture of 2 or more substances and not all solutions are liquid
A solution is formed by the mixture of substances dissolved in water. There may have more than one solute. Not all solutions are liquid but there exists solid solutions too. Hence, options A, B, C are correct.
What are solutions?A solution is a combination of a solvent and a solid solute. The solute can be completely dissolved in the solvent and can have a partial solubility.
Water is a good solvent which dissolve majority of compounds. But there are other solvents too forming solution with suitable solutes. Solutions can be homogenous or heterogenous. Homogenous solutions are forming one phase and the solute particles are uniformly arranged.
Heterogeneous solutions are those where the solute particles are arranged in a non-uniformity and they form a different phase from the solvent.
There can be more than one solute in a solution provided that the solute can be of miscibility with each other.
To find more about solutions, refer the link below:
https://brainly.com/question/1616939
#SPJ2
Alison observes that when she injects additional gas molecules into a container of gas, the number of collisions in the container (and the pressure inside) increases. She then increases the volume of the container just enough to restore it to its original pressure. Which of the following laws best describes what Alison observed?
A. Amonton's Law
B. Avogadro's Law
C. Boyles Law
D. Charles's Law
E. Dalton's Law
Answer:
Explanait it is not d
which is the first news paper of Nepal
Answer:
Nepal Bhasa Patrika
Explanation:
Nepal Bhasa Patrika
