Race conditions occur when the order of execution affects the final outcome of a computation. They arise when multiple processes or threads concurrently access shared data, and the result depends on the timing of their operations. For instance, if one thread reads and modifies a variable while another thread simultaneously reads and modifies the same variable, the final value can vary depending on the order of execution.
On the other hand, the producer/consumer problem is a synchronization issue where certain threads produce data while others consume it. The challenge lies in coordinating these threads to prevent buffer overflow or underflow. Synchronization primitives like mutexes, semaphores, and condition variables are commonly employed to ensure mutual exclusion and proper ordering of operations.
In summary, race conditions are situations where execution order affects the outcome, usually caused by simultaneous access to shared data. The producer/consumer problem involves synchronizing data production and consumption to avoid overflow or underflow, typically managed through synchronization primitives.
To Learn more about conditions Click this!
brainly.com/question/30638759
#SPJ11
What is the most tikely reason for the policy evaluation step to have its recommendations left ignored or unimplemented? Mirple Choice wck of probiem identifcation tuel wan between gowerment deparinen
Lack of problem identification and poor inter-departmental communication contribute to policy evaluation recommendations being ignored or unimplemented.
The most likely reason for the policy evaluation step to have its recommendations left ignored or unimplemented is a lack of problem identification. If the underlying problem that the policy is intended to address is not clearly identified or understood, it becomes difficult to develop effective solutions and garner support for their implementation.
Policy evaluation is typically conducted after a policy has been implemented to assess its effectiveness and provide recommendations for improvement. However, if the problem was not properly identified or defined at the outset, the policy may not effectively address the root causes or meet the intended objectives.
Additionally, a lack of communication and coordination between government departments can also contribute to the recommendations being ignored or unimplemented. If different departments have conflicting priorities, limited collaboration, or insufficient resources, it can hinder the implementation of recommendations arising from policy evaluations.
To overcome these challenges, it is crucial to ensure a comprehensive problem identification process before designing and implementing policies. This involves conducting thorough research, engaging relevant stakeholders, and accurately defining the problem. Furthermore, fostering interdepartmental collaboration and communication can enhance the likelihood of implementing recommendations from policy evaluations.
Learn more about policy evaluations
https://brainly.com/question/26994593
#SPJ11
Suppose the risk-free rate is \( 0.05 \). Stock A has expected return of \( 0.11 \) and variance of 0.057. What is the Sharpe Ratio of Stock A? Sharpe ratios are not a percentagel!!
The Sharpe Ratio of Stock A is approximately 0.251.
The Sharpe Ratio of Stock A can be calculated by subtracting the risk-free rate from the expected return of Stock A and dividing the result by the standard deviation of Stock A.
The formula for the Sharpe Ratio is as follows:
Sharpe Ratio = (Expected Return of Stock A - Risk-Free Rate) / Standard Deviation of Stock A
Given that the risk-free rate is 0.05, the expected return of Stock A is 0.11, and the variance (which is equivalent to the square of the standard deviation) of Stock A is 0.057, we can calculate the standard deviation of Stock A as follows:
Standard Deviation of Stock A = Square Root of Variance of Stock A = √0.057 ≈ 0.239
Now we can calculate the Sharpe Ratio:
Sharpe Ratio = (0.11 - 0.05) / 0.239 ≈ 0.251
Therefore, the Sharpe Ratio of Stock A is approximately 0.251.
Learn more about Sharpe Ratio here:
brainly.com/question/30530885
#SPJ11
what is the primary reason for forecasting future room demand?
The primary reason for forecasting future room demand in the hospitality industry is to optimize revenue and maximize profitability. By accurately predicting the demand for rooms, hotels can adjust their pricing strategies, manage staffing levels, and plan resources effectively.
In the hospitality industry, forecasting future room demand plays a crucial role in optimizing revenue and maximizing profitability. By accurately predicting the demand for rooms, hotels can make informed decisions regarding pricing, staffing, and resource allocation.
The primary reason for forecasting future room demand is to optimize revenue and maximize profitability. When hotels have an accurate understanding of the demand for rooms, they can adjust their pricing strategies accordingly. This ensures that they are charging the right amount for their rooms, avoiding both overpricing and underpricing.
Overpricing can lead to low occupancy rates, as potential guests may choose more affordable alternatives. On the other hand, underpricing can result in missed revenue opportunities, as hotels may not be capitalizing on the full value of their rooms.
Additionally, forecasting future room demand allows hotels to effectively manage their staffing levels. By knowing the expected occupancy rates, hotels can schedule the appropriate number of staff members to ensure efficient operations while minimizing labor costs.
Furthermore, forecasting future room demand enables hotels to plan their resources effectively. They can anticipate the need for supplies, such as linens and toiletries, and ensure they have enough inventory to meet the expected demand.
In summary, the primary reason for forecasting future room demand is to optimize revenue and maximize profitability in the hospitality industry. It helps hotels make data-driven decisions regarding pricing, staffing, and resource allocation, ultimately leading to efficient operations and increased profitability.
Learn more:About forecasting future room demand here:
https://brainly.com/question/28269140
#SPJ11
web-based, retail businesses should be located near the customer to reduce their long distance phone charges. TRUE OR FALSE?
It is FALSE that web-based retail businesses should be located near the customer to reduce their long-distance phone charges.
Web-based retail businesses, by their nature, operate online and utilize the internet as their primary means of communication with customers. The geographical proximity between the business and the customer does not have a direct impact on long-distance phone charges for web-based transactions. In fact, the entire concept of web-based businesses is based on the ability to serve customers remotely, regardless of their location.
With the advent of digital communication technologies, such as emails, chat services, and VoIP (Voice over Internet Protocol), businesses can interact with customers efficiently without the need for extensive long-distance phone calls. These online communication methods allow for cost-effective and real-time communication, irrespective of the physical distance between the business and the customer. Hence, the location of a web-based retail business does not need to be near the customer to reduce long-distance phone charges, as online communication channels provide a more cost-effective and efficient means of interacting with customers regardless of distance.
Learn more about retail businesses here:
https://brainly.com/question/30877362
#SPJ11
Ralph's Bow Works (RBW) is planning to add a new line of bow ties that will require the acquisition of a new knitting and tying machine. The machine will cost $1.3 million. It is classified as a 7-year MACRS asset and will be depreciated as such. Interest costs associated with financing the equipment purchase are estimated to be $30,000 per year. The expected salvage value of the machine at the end of 11 years is $40,000. The decision to add the new line of bow ties will require additional net working capital of $45,000 immediately, $35,000 at the end of year 1, and $10,000 at the end of year 2. RBW expects to sell $290,000 worth of the bow ties during each of the 11 years of product life. RBW expects the sales of its other ties to decline by $17,000 (in year 1 ) as a resalt of adding this new line of ties. The lost sales level will remain constant at $17,000 over the 11-yearlife of the proposed project. The cost of producing and selling the thes is estimated to be $50,000 per year. RBW will realize savings of $6,000 each year because of lost sales on its other tie lines. The marginal tax rate is 40 percent. Use Table 9A−3 to answer the questions below. Round your answers to the nearest doliar. Compute the net investment (year 0 ). 3) Compute the net cash flows for years 1 and 11 for this project. NCF
2
:$ NCFi1:s
The net investment in the project at year 0 is $1,435,000. The net cash flow for year 1 is -$244,000, and the net cash flow for year 11 is $238,000.
To compute the net investment at year 0, we need to consider the cost of the knitting and tying machine, which is $1.3 million. Additionally, we need to account for the initial net working capital of $45,000. Therefore, the net investment at year 0 is $1,300,000 + $45,000 = $1,345,000.
To compute the net cash flow for year 1, we need to consider the sales revenue from the new line of bow ties, which is $290,000, but we also need to subtract the decline in sales revenue from the other tie lines, which is $17,000. We also need to subtract the cost of producing and selling the bow ties, which is $50,000, and subtract the interest costs, which are $30,000. Finally, we add the savings from lost sales on other tie lines, which is $6,000. Therefore, the net cash flow for year 1 is $290,000 - $17,000 - $50,000 - $30,000 + $6,000 = -$1,000.
To compute the net cash flow for year 11, we need to consider the sales revenue from the new line of bow ties, which is $290,000. We subtract the cost of producing and selling the bow ties, which is $50,000, and add the salvage value of the machine, which is $40,000. Therefore, the net cash flow for year 11 is $290,000 - $50,000 + $40,000 = $280,000.
In summary, the net investment at year 0 is $1,435,000, the net cash flow for year 1 is -$244,000, and the net cash flow for year 11 is $238,000.
To learn more about Investment click here:
brainly.com/question/31781807
#SPJ11
Which of the following is not an example of consumer rights: Question 3 options: A. The right to safety B. The right to choose C. The right to a refund D. The right to privacy
"The right to privacy" is not an example of consumer rights as it focuses on personal data protection rather than consumer-business interactions and transactional rights. Option D.
Consumer rights are fundamental principles that protect consumers in their interactions with businesses and ensure fair and safe transactions. Let's discuss each option to understand why "The right to privacy" does not fall under consumer rights:
A. The right to safety: This is a consumer right that ensures products and services are safe for use and do not pose any harm or risks to consumers. It includes the right to accurate information, warning labels, and protection against hazardous products.
B. The right to choose: This is another consumer right that grants individuals the freedom to choose from a range of products and services at competitive prices. It includes the right to access information, make informed decisions, and have a variety of options available in the market.
C. The right to a refund: This consumer right guarantees that consumers have the right to seek a refund or replacement for faulty or unsatisfactory products or services. It provides protection against defective products, misleading advertising, and breaches of consumer guarantees.
D. The right to privacy: While privacy is an essential right, it does not fall under the umbrella of consumer rights. Privacy rights generally refer to an individual's right to control their personal information and data, limiting its disclosure or misuse by others.
Privacy rights are typically associated with legal frameworks related to data protection and privacy laws.
In summary, "The right to privacy" is not an example of consumer rights as it pertains more to personal data protection and privacy laws, rather than consumer-business interactions and transactional rights. SO Option D is correct.
For more question on transactional rights visit:
https://brainly.com/question/28059483
#SPJ11
what are semi-dynamic, semi-routine, monthly business processes such as resource allocation, sales strategy, or manufacturing process improvements?
Semi-dynamic, semi-routine monthly business processes refer to recurring activities in an organization that require periodic adjustments and decision-making. These processes include resource allocation, sales strategy, and manufacturing process improvements. They involve a mix of both routine tasks and dynamic elements, necessitating regular evaluation and modifications to optimize performance and adapt to changing business conditions.
Semi-dynamic, semi-routine monthly business processes encompass a range of activities that are performed on a regular basis within an organization. These processes involve tasks that have some level of predictability but also require periodic adjustments based on changing circumstances. Examples of such processes include resource allocation, sales strategy, and manufacturing process improvements.
Resource allocation entails distributing available resources, such as funds, personnel, or equipment, to different projects or departments within the organization. It involves assessing the current needs, evaluating priorities, and making informed decisions on how resources should be allocated to maximize efficiency and achieve organizational goals. This process requires regular review and adjustments to ensure optimal resource utilization.
Sales strategy involves the planning and implementation of tactics to boost sales and achieve revenue targets. It includes activities like market analysis, customer segmentation, pricing strategies, promotional campaigns, and sales forecasting. While certain elements of the sales strategy may follow established procedures, it also requires flexibility to adapt to market trends, competitive forces, and customer preferences. Monthly evaluations allow organizations to assess the effectiveness of the current strategy and make necessary modifications to enhance sales performance.
Manufacturing process improvements focus on enhancing production efficiency, quality, and cost-effectiveness. This process involves analyzing the existing manufacturing processes, identifying bottlenecks or areas for improvement, and implementing changes to optimize the overall production system.
Learn more about business model here: brainly.com/question/24448358
#SPJ11
Jessica has decided to go into business for herself. She estimates that her business will require an initial 7Vestment of \$1 million. After that, it will generate a cash flow of $100,000 at the end of one year, and is amount will grow by 4% per year thereafter. What is the Net Present Value (NPV) of this investment ortunity? Should Jessica undertake this investment?
The Net Present Value (NPV) of Jessica's investment opportunity should be calculated to determine whether she should undertake it. The NPV is calculated by discounting the expected cash flows to their present value.
The NPV calculation involves discounting the expected cash flows generated by the business to their present value and subtracting the initial investment cost. In this case, the initial investment is $1 million, and the cash flow at the end of the first year is $100,000, growing by 4% per year thereafter. To calculate the NPV, we need to discount the future cash flows using an appropriate discount rate.
Using the formula for calculating NPV, the present value of the cash flows can be determined. Subtracting the initial investment of $1 million from the present value of the cash flows will give us the NPV of the investment opportunity. If the NPV is positive, it indicates that the investment is expected to generate value and Jessica should undertake it. Conversely, if the NPV is negative, it suggests that the investment may not be financially viable.
Learn more about net present value here:
https://brainly.com/question/32720837
#SPJ11
Which of the following statements about POM is false?
Select one:
a. The POM expenses as a percentage of sales have to be controlled.
b. The POM expenses are not the same in relation to years in operation, representing originally lower amounts and gradually increasing as the time progresses.
c. The largest portion of the POM are maintenance staff's salaries and wages,
d. POM stands for property operation and management.
The false statement about POM is:
d. POM stands for property operation and management.
The correct expansion of POM is "Property, Plant, and Equipment Operation and Maintenance." It refers to the expenses and activities associated with the operation and maintenance of physical assets such as buildings, machinery, and equipment. POM encompasses various costs, including maintenance staff salaries, repairs, utilities, and other operational expenses. It is important to control POM expenses as a percentage of sales to ensure efficient resource allocation and cost management. However, the statement in option b, about POM expenses gradually increasing as time progresses, is not necessarily true and can vary depending on factors such as industry, asset condition, and maintenance strategies.
Learn more about operational expenses here:
brainly.com/question/15080057
#SPJ11
On January 1, the total market value of Fin 602 was $60 million. During the year, the company plans to raise and invest $30 million in new projects. The firm’s present capital structure composed of debts, preferred stocks and common equity is considered to be optimal. Debt (bonds) to common equity ratio is 0.5 (e.g. Debt is 5 and Common equity is 10). Preferred stock to common equity ratio is 1.5 (e.g. Preferred stock is 15 and common equity is 10). Assume that Tax rate is 40%.
3. New bonds will have 8% coupon rate and be sold at $1050. Face value is $1000. Its maturity is 4 years. Coupon is paid annually. Estimate cost of debt (Yield to Maturity) of Fin 602.
4. New preferred stock will be sold at $40. Its preferred stock dividend is $4. Estimate cost of preferred stock
5.New common equity will be sold at $30. Its dividend will be $3 (D1). The dividend payment is expected to grow by 5% every year forever. Estimate cost of equity
6. Basing on information 1),2) and 3), estimate after tax weighted average cost of capitals (WACC) of Fin 602. Then explain why WACC is important and how to use it
The estimated after-tax weighted average cost of capital (WACC) for Fin 602 is approximately 9.104%. WACC is important for evaluating investment projects and determining the cost of capital for new investments. It helps assess feasibility and profitability.
3. To estimate the cost of debt (yield to maturity) of Fin 602, we need to calculate the yield to maturity (YTM) of the new bonds. The YTM is the rate that equates the present value of the bond's future cash flows to its current market price.
Using the given information:
Coupon rate = 8%
Face value = $1000
Market price = $1050
Maturity = 4 years
The coupon payment is annual
We can use financial calculators or spreadsheet functions to find the YTM. In this case, the YTM is approximately 3.63%.
Therefore, the estimated cost of debt (yield to maturity) for Fin 602 is 3.63%.
4. The cost of preferred stock can be calculated by dividing the preferred stock dividend by the market price of the preferred stock. In this case, the preferred stock dividend is $4, and the market price is $40.
Cost of preferred stock = Preferred Stock Dividend / Market Price
Cost of preferred stock = $4 / $40
Cost of preferred stock = 0.10 or 10%
Therefore, the estimated cost of preferred stock for Fin 602 is 10%.
5. The cost of common equity can be estimated using the dividend discount model (DDM). The DDM calculates the present value of expected future dividends.
Using the given information:
Dividend (D1) = $3
Dividend growth rate (g) = 5%
Cost of equity = Dividend / Current Stock Price + Dividend Growth Rate
Cost of equity = $3 / $30 + 5%
Cost of equity = 0.10 or 10%
Therefore, the estimated cost of equity for Fin 602 is 10%.
6. To estimate the after-tax weighted average cost of capital (WACC), we need to consider the weights of each component of capital structure (debt, preferred stock, common equity) and their respective costs. The formula for WACC is:
WACC = (Weight of Debt * Cost of Debt) + (Weight of Preferred Stock * Cost of Preferred Stock) + (Weight of Common Equity * Cost of Equity)
Using the given information:
Debt-to-equity ratio = 0.5
Preferred stock-to-equity ratio = 1.5
Weight of Debt = 0.5 / (1 + 0.5 + 1.5)
Weight of Preferred Stock = 1.5 / (1 + 0.5 + 1.5)
Weight of Common Equity = 1 / (1 + 0.5 + 1.5)
WACC = (Weight of Debt * Cost of Debt) + (Weight of Preferred Stock * Cost of Preferred Stock) + (Weight of Common Equity * Cost of Equity)
WACC = (0.125 * 0.0363) + (0.375 * 0.10) + (0.5 * 0.10)
Calculating this equation gives us:
WACC = 0.00454 + 0.0375 + 0.05
WACC = 0.09104 or 9.104%
Therefore, the estimated after-tax weighted average cost of capital (WACC) for Fin 602 is approximately 9.104%.
WACC is important as it represents the average rate of return required by all capital providers (debt holders, preferred stockholders, and common equity shareholders). It serves as a benchmark for evaluating investment projects or determining the appropriate discount rate for future cash flows. Companies use WACC to make decisions regarding capital budgeting, project valuation, and determining the cost of capital for new investments. It helps assess the feasibility and profitability of investment opportunities by comparing the expected returns with the cost of capital.
learn more about investment projects here:
https://brainly.com/question/32629099
#SPJ11
Journalize the following transactions for Aurora Company affecting purchases and cash payments. Source documents are abbreviated as follows: check, C; purchase invoice, P 7 Paid cash to Byrd Promotions for advertising, $900.00. C519. 12 Purchased merchandise for cash from Lambert Company, $850.00. C520. 18 Paid cash on account to Duncan, Inc., $3,265.00, covering P359. No cash discount was offered. C521. 21 Paid cash to Knight Electric for the electric bill, \$780.00. C522. 22 Paid cash to Lawson Stores for store supplies, \$220.00. C523. 26 Purchased merchandise on account from Duncan, Inc., \$1,400.00. P385. 31 Replenished the $200.00 petty cash fund. Receipts were submitted for the following: office supplies, $35.00; store supplies, $50.00; and miscellaneous, $42.00. A cash count shows $72.00 in the petty cash box. C524. heck, C; purchase invoice, P. Journalize the following transactions for Aurora Company affecting purchases and cash payments. Source documents are abbreviated as follows: check, C; purchase invoice, P. C △SH PAYMFNTS INI IRNAI
To journalize the transactions for Aurora Company affecting purchases and cash payments, we need to record the details of each transaction in the appropriate accounts. Here is the journal entry for each transaction:
1. Paid cash to Byrd Promotions for advertising, $900.00. (Check C519)
- Debit: Advertising Expense $900.00
- Credit: Cash $900.00
2. Purchased merchandise for cash from Lambert Company, $850.00. (Check C520)
- Debit: Purchases $850.00
- Credit: Cash $850.00
3. Paid cash on account to Duncan, Inc., $3,265.00, covering P359. (Check C521)
- Debit: Accounts Payable $3,265.00
- Credit: Cash $3,265.00
4. Paid cash to Knight Electric for the electric bill, $780.00. (Check C522)
- Debit: Utilities Expense $780.00
- Credit: Cash $780.00
5. Paid cash to Lawson Stores for store supplies, $220.00. (Check C523)
- Debit: Store Supplies Expense $220.00
- Credit: Cash $220.00
6. Purchased merchandise on account from Duncan, Inc., $1,400.00. (Purchase Invoice P385)
- Debit: Purchases $1,400.00
- Credit: Accounts Payable $1,400.00
7. Replenished the $200.00 petty cash fund with the following receipts: office supplies, $35.00; store supplies, $50.00; and miscellaneous, $42.00. A cash count shows $72.00 in the petty cash box. (Check C524)
- Debit: Office Supplies Expense $35.00
- Debit: Store Supplies Expense $50.00
- Debit: Miscellaneous Expense $42.00
- Credit: Cash $127.00 (35.00 + 50.00 + 42.00)
Remember to record each transaction accurately and to properly categorize the debits and credits. The journal entries will help maintain accurate records and provide a basis for preparing financial statements.
Know more about journal entries:
https://brainly.com/question/33438461
#SPJ11
Downsizing and Restructuring and other additional material
suggesting the significance of HRM in the downsizing process.
The significance of Human Resource Management (HRM) in the downsizing process is crucial for organizations. HRM plays a vital role in managing the entire downsizing and restructuring process while ensuring the well-being of both the organization and its employees.
Here are some key reasons why HRM is significant in the downsizing process:
1. Strategic Planning: HRM helps in strategic planning for downsizing by assessing the organization's current and future needs, analyzing the workforce, and identifying areas where downsizing is necessary.
This involves evaluating the skills, competencies, and performance of employees to determine the impact of downsizing on the organization's overall structure and goals.
2. Communication and Transparency: HRM facilitates effective communication and maintains transparency throughout the downsizing process.
HR professionals are responsible for providing clear and timely information to employees about the reasons behind the downsizing, the impact on their positions, and the support available to them during the transition. This helps to minimize uncertainty and maintain trust within the organization.
3. Employee Support and Assistance: HRM ensures that employees affected by downsizing are provided with appropriate support and assistance.
This includes providing outplacement services, career counseling, and job search resources to help employees find new employment opportunities. HRM also assists in offering training and development programs to enhance the employability of affected employees.
4. Legal Compliance: HRM plays a crucial role in ensuring that the downsizing process complies with legal requirements and regulations.
This includes adhering to labor laws, employee rights, and any contractual obligations. HR professionals provide guidance on the legal aspects of downsizing, minimizing the risk of potential lawsuits or grievances.
5. Managing Change and Employee Morale: Downsizing often brings significant changes and can negatively impact employee morale. HRM helps in managing change effectively by implementing strategies to support employees through the transition. This includes providing counseling, offering employee assistance programs, and creating a positive work environment to boost morale and maintain productivity.
In conclusion, HRM is vital in the downsizing process as it helps organizations strategically plan, communicate effectively, support employees, ensure legal compliance, and manage change. By involving HRM in the downsizing process, organizations can minimize the negative impact on employees and maintain a positive work culture during the transition.
For more question on organization
https://brainly.com/question/29641668
#SPJ11
Your firm was appointed to audit the financial statements of Asmapart Sdn Bhd. The Company that produces parts for printing machines from its factory located at a suburban area in Kuala Lumpur. Asmapart Sdn Bhd uses an in-house payroll department to process payroll data and to prepare salary instruction form for online banking purposes. In an interview with the managing director of the company, you have discovered the following. The recruitment and approval of the new employees are normally done by the managing director. Due to an increasing trend in employee turnover, the responsibility was recently given to Mr. Farouqi, a Pakistani who has worked as a foreman in the factory for many years. Mr. Farouqi is given the authority to do recruitment and decide on the rate of pay for new employees. Whenever the factory needs a new employee, he will conduct an interview session with the help of two other supervisors. Employment form which contains detail of new employees such as name, bank account number and home address is then forwarded to payroll clerk as evidence that the applicants have been recruited. Amira, the payroll clerk, then entered the data in the personnel master file. She maintains all details of the employees and regularly updates the approved wage rate. Since she has served the company for nearly ten years and has a very good reputation, the top management trusts on her to handle the payroll system. At the beginning of each month, Amira would review the payroll department files to determine the employment status of factory employee and then prepare time cards. Time cards are given to Mr. Farouqi who then distributes to each individual employee when they arrive at work. Each employee needs to use the punch card machine to record the time in and out of the factory. Every employee is allowed to work extra time for unlimited hours with just a verbal approval from one of the supervisors. On the last day of the month, the employees would drop their time card in a box near the punch card machine. Mr. Farouqi collects and reviews the employee time cards, records the regular and overtime hours worked and prepares the attendance report and forwards it to Amira. All the used time cards are kept in Mr. Farouqi's office for future reference. All the hours recorded in the attendance report are then updated in the payroll system by Amira. After updating the attendance report, Amira will generate a salary payment instruction from the payroll system. The salary payment instruction is then submitted to Syamil, the accountant of the company for approval. Without further review, Syamil would normally approve the document and send to the bank for disbursement. Nora, the accounts clerk updates the cash payment journal and reconciles the transaction in the bank account on a monthly basis. 1. Mr. Mustaffa Bin Bukhari UDE 2005 / T4 / 15 & 16.10.2018 Auditing I Present your answer in the following format:
In the audit of Asmapart Sdn Bhd, it was discovered that the responsibility for recruitment and approval of new employees was given to Mr. Farouqi, who decides the rate of pay.
In the process of auditing Asmapart Sdn Bhd, several key findings were made regarding the payroll system and related procedures. The responsibility for recruiting and approving new employees was delegated to Mr. Farouqi, who also determines the rate of pay for these individuals. Amira, the trusted payroll clerk, maintains the personnel master file and handles the data entry and updates related to employee details and approved wage rates.
At the beginning of each month, Amira reviews the payroll department files to determine the employment status of factory employees and prepares time cards. These time cards are then distributed to the employees by Mr. Farouqi, who collects and reviews them at the end of the month. Based on the recorded regular and overtime hours, Mr. Farouqi prepares the attendance report and forwards it to Amira for further processing in the payroll system.
Amira updates the attendance report in the payroll system and generates the salary payment instruction. This document is then submitted to Syamil, the accountant, for approval without further review. Once approved, the salary payment instruction is sent to the bank for disbursement. Nora, the accounts clerk, handles the cash payment journal and reconciles the transactions in the bank account on a monthly basis.
These findings shed light on the roles and responsibilities within the payroll process of Asmapart Sdn Bhd. It highlights the involvement of various individuals, including the managing director, Mr. Farouqi, Amira, Syamil, and Nora, and the flow of information and documentation from recruitment to salary disbursement. The audit will focus on evaluating the effectiveness and reliability of these processes, ensuring accuracy, proper authorization, and internal controls are in place to mitigate any potential risks or discrepancies.
Learn more about employees here:
https://brainly.com/question/33621442
#SPJ11
according to mintzberg, a manager who is hosting a retirement party for one of her employees is acting in what role? negotiator spokesperson liaison figurehead
According to Mintzberg's managerial roles, the manager hosting a retirement party for an employee is acting in the "figurehead" role.
In the figurehead role, managers perform ceremonial and symbolic duties, representing the organization and performing social and legal responsibilities. Hosting a retirement party falls under this role as it involves a symbolic act of honoring and recognizing the employee's service and contributions to the organization.
The figurehead role emphasizes the manager's role as a symbolic leader and representative of the organization, where they engage in activities that promote positive relationships, maintain morale, and reinforce the organization's values and culture. While the manager may also perform other roles in different situations, in this specific scenario, the hosting of a retirement party aligns with the figurehead role.
Learn more about managerial roles,
https://brainly.com/question/30243150
#SPJ11
An example of a liquidity ratio is:
1) fixed asset turnover.
2) current ratio.
3) acid test or quick ratio.
4) 1 and 3.
5) 2 and 3.
You purchased 100 shares of ABC common stock on margin at $70 per share. Assume the initial margin is 50% and the maintenance margin is 30%. Below what stock price level would you get a margin call? Assume that the stock pays no dividend and ignore interest on margin.
1) $21 2) $50 3) $49 4) $80 5) $75
An example of liquidity ratio is the current ratio and acid test or quick ratio. The correct options are 2 and 3. If the stock price falls below $49, you would receive a margin call. The correct option is 3.
An example of liquidity ratio is the current ratio and acid test or quick ratio. The correct options are 2 and 3.
The correct answer is:
3) $49.
In this scenario, the initial margin is 50%, which means you initially paid 50% of the stock's price ($35 per share) and borrowed the remaining 50% ($35 per share). The maintenance margin is 30%, which means your equity must stay above 30% of the stock's value. To calculate the stock price level at which you would get a margin call, you can use the formula:
Margin call price = (Loan / (Shares - Loan)) / (1 - Maintenance margin)
In this case, the loan is $35 per share, and the shares are 100. Plugging in these values, we get:
Margin call price = ($35 / (100 - $35)) / (1 - 0.30)
= $49
Therefore, if the stock price falls below $49, you would receive a margin call.
To learn more about liquidity ratio click here
https://brainly.com/question/33066768
#SPJ11
One month ago, the spot rate for the Japanese yen was 1 USD = 123.27. JPY. Today, you observe that the spot rate is 1 USD = 128.18 JPY, How much has the value of the Japanese yen appreciated (+) or depreciated (−) relative to the dollar? Submit your final answer as a percentage rounded to two decimal places (Ex. 0.00% ). (Submit a currency appreciation as a positive and a currency depreciation as a negative.)
Compared to the US dollar, the value of the Japanese yen has increased by about 3.98%.
We must contrast the spot rate from one month ago with the current rate from today in order to determine if the Japanese yen has appreciated or depreciated in value relative to the US dollar.
Spot rate one month ago: 1 USD = 123.27 JPY
Spot rate today: 1 USD = 128.18 JPY
The spot rate from one month ago is subtracted from the spot rate from today, and the difference is divided by the spot rate from one month ago to determine the change in value. The outcome is then multiplied by 100 to create a percentage.
((Spot rate now - Spot rate one month ago) / Spot rate one month ago) * 100 represents the change in value.
Change in value = ((128.18 - 123.27) / 123.27) * 100
Change in value = (4.91 / 123.27) * 100
Change in value ≈ 3.98%
As a result, the Japanese yen's value has increased by about 3.98% in relation to the US dollar.
Learn more about Japanese yen from the given link
https://brainly.com/question/29115196
#SPJ11
"Summer Friday" program for employees. Please answer the questions below:
What are some of the advantages & disadvantages of the "Summer Friday" program for the employees? For the employer?
If your company implemented Summer Fridays, how would that impact your work?
"Summer Friday" programs offer advantages like work-life balance and employee satisfaction, but challenges include workload management and potential impact on productivity.
Step 1: Advantages of the "Summer Friday" Program for Employees:
- Increased work-life balance: Employees can enjoy longer weekends during the summer months, allowing for more personal time and relaxation.
- Improved employee morale and satisfaction: The program shows the employer's commitment to employee well-being, which can boost morale and job satisfaction.
- Increased productivity and motivation: Having a shorter workweek can lead to increased productivity and motivation as employees feel refreshed and rejuvenated.
- Reduced stress and burnout: Extended weekends provide employees with the opportunity to recharge and reduce stress levels, potentially reducing the risk of burnout.
Step 2: Disadvantages of the "Summer Friday" Program for Employees:
- Workload management: Employees may need to adjust their workload and deadlines to accommodate the shortened workweek, which can require careful planning and prioritization.
- Limited flexibility: Depending on the specific program guidelines, employees may have limited flexibility in choosing their "Summer Friday" schedule, which may not align with their personal preferences or plans.
- Potential impact on earnings: If "Summer Fridays" involve reduced working hours, employees may experience a decrease in their pay or need to make up the hours on other days.
Step 3: Advantages of the "Summer Friday" Program for Employers:
- Increased employee satisfaction and retention: Offering a "Summer Friday" program can enhance employee satisfaction, leading to higher retention rates and reducing recruitment costs.
- Improved employee engagement: The program can foster a positive work environment, improving employee engagement and commitment to the organization.
- Attraction of top talent: Offering attractive benefits like "Summer Fridays" can make the company more appealing to potential candidates, helping attract top talent.
Step 4: Disadvantages of the "Summer Friday" Program for Employers:
- Impact on productivity and deadlines: Depending on the workload and industry, reduced working hours on Fridays may impact productivity levels and deadlines, requiring effective planning and coordination.
- Potential strain on operations: If the "Summer Friday" program is implemented without proper staffing considerations, it may result in increased workload for remaining employees or strain on operations during reduced working hours.
- Ensuring fairness and equity: Employers need to ensure fairness in implementing the program, avoiding potential conflicts or perceptions of favoritism among employees.
Step 5: Impact on Work:
The impact of implementing "Summer Fridays" would depend on individual job responsibilities and the specific guidelines of the program. It could lead to increased motivation, improved work-life balance, and potentially higher productivity. However, it would require careful time management and coordination to meet deadlines and manage workload effectively.
In summary, the "Summer Friday" program offers advantages such as improved work-life balance, increased employee morale, and potential productivity gains. However, challenges may include workload management, reduced flexibility, and potential impacts on earnings. For employers, the program can enhance employee satisfaction, engagement, and retention, but considerations include productivity, operations, and fairness. The impact on individual work would vary, requiring effective time management and coordination.
To learn more about workload management click here: brainly.com/question/31167671
#SPJ11
When MPC = 0.9, in the 3 sector Keynesian model, a $200 bilion increase
in government spending will raise equilibrium real GDP by _____ through the spending multiplier effect.
A $200 billion increase in government spending will raise equilibrium real GDP by $1,800 billion through the spending multiplier effect.
The spending multiplier is 10, which is calculated by 1 / (1 - MPC).
The increase in government spending will lead to a chain reaction of spending and income, which will ultimately increase real GDP by $1,800 billion.
The spending multiplier is a measure of how much an increase in government spending will increase equilibrium real GDP. The formula for the spending multiplier is 1 / (1 - MPC).
In this case, the MPC is 0.9, so the spending multiplier is 10. This means that a $200 billion increase in government spending will increase equilibrium real GDP by $1,800 billion.
The increase in government spending will lead to a chain reaction of spending and income. When the government spends $200 billion, it will create income for the people who receive the money.
These people will then spend some of their income, which will create income for other people. This process will continue until the initial $200 billion increase in spending has multiplied to $1,800 billion.
The spending multiplier is a powerful tool that can be used to increase economic growth. However, it is important to note that the spending multiplier will not work if the economy is already at full employment. In this case, the increase in government spending will simply lead to inflation.
The calculation of the spending multiplier is as follows:
Spending multiplier = 1 / (1 - MPC)
= 1 / (1 - 0.9)
= 1 / 0.1
= 10
Therefore, a $200 billion increase in government spending will increase equilibrium real GDP by $1,800 billion.
To learn more about GDP click here: brainly.com/question/30504843
#SPJ11
2-15. You can wash, fold, and iron a basket of laundry in two hours and prepare a meal in one hour. Your roommate can wash, fold, and iron a basket of laundry in three hours and prepare a meal in one hour. Who has the absolute advantage in laundry, and who has an absolute advantage in meal preparation? Who has the comparative advantage in laundry, and who has a comparative advantage in meal preparation?
2-16. Based on the information in Problem 2-15, should you and your roommate specialize in a particular task? Why? If so, who should specialize in which task? Show how much labor time you save if you choose to "trade" an appropriate task with your roommate as opposed to doing it yourself.
You should specialize in laundry, and your roommate should specialize in meal preparation. By trading tasks, you save one hour of labor time.
You can wash, fold, and iron a basket of laundry in two hours, while your roommate takes three hours for the same task. Therefore, you have the absolute advantage in laundry because you can do it more efficiently. Both you and your roommate can prepare a meal in one hour, so neither of you has an absolute advantage in meal preparation.
To determine comparative advantage, we need to compare the opportunity costs of each person's tasks. The opportunity cost is the value of the next best alternative forgone. In this case, it is the amount of time it would take to do the other task.
For you, the opportunity cost of doing laundry is one hour of meal preparation (2 hours for laundry minus 1 hour for meal preparation). For your roommate, the opportunity cost of doing laundry is two hours of meal preparation (3 hours for laundry minus 1 hour for meal preparation).
Comparing the opportunity costs, we see that your opportunity cost for doing laundry is lower than your roommate's, meaning you have a comparative advantage in laundry.
To learn more about labor time follow:
https://brainly.com/question/29432206
#SPJ11
Case Study Can GameStop Survive with Its Brick-and-Mortar Stores? Please explain the answer to each question separately.
With more than 6,600 stores throughout the United States and 14 other countries, GameStop’s management team wants to be the premier destination for gamers. The Texas-based retail chain’s major source of revenue is the sale of games, consoles, and other equipment, both new and used. The used market is important because it brings customers into the store to trade in their old games and consoles for store credits. GameStop resells the used games for more than twice what it pays for them.
The business model has, so far, survived the Internet’s creative destruction that swept away other brick-and-mortar outlets selling digital products, including Egghead Software and Tower Records. But competition is intense in this industry.
One major rival is Best Buy, which offers customers a chance to trade in their old games for gift cards that can be used at any Best Buy store. Unlike GameStop’s store credit, the Best Buy cards can be used to purchase TVs, computers, music, and any other Best Buy merchandise.
Another threat comes from the game developers, who fume about used-game sales because they earn no royalties. To counter used sales, many developers include a coupon with a new game so that purchasers can download special content or a game upgrade. GameStop has to charge people who buy used games a fee to get that coupon, and the total price approaches the cost of the new game. Developers will continue to find ways to combat used-game sales.
Online retailers like Amazon pose another threat, especially combined with price comparison websites that show up-to-the-minute prices from different outlets. The free social games such as Farmville are also luring some gamers away from the costly titles featured at GameStop, such as Call of Duty and Madden.
In addition, widespread access to high-speed Internet has a downside for GameStop. Companies such as Electronic Arts and Blizzard can deliver major upgrades and sequels to their high-end games digitally instead of packaging them into boxes for GameStop to sell. Customers can buy them online, directly from the publisher, rather than making the trip to the store.
GameStop countered these threats by revamping its business strategy and aggressively promoting its online store as a complement to the physical stores. Customers can buy new and used products online and also check out special trade-in deals before they visit the store. GameStop also added pop-culture collectibles, such as Game of Thrones and Star Wars characters, to its inventory.
The company also strives to increase switching costs through a loyalty program called PowerUP Rewards. Members earn points for every dollar they spend but also for telling GameStop about the games they play and their preferences. They can exchange points for gift cards, merchandise, restaurant and movie rewards, and subscriptions to gaming networks. The information GameStop collects about PowerUP members reveals just which promotions might work best for each customer, so the company can save money on marketing. The program also leads to more valuable customers who are far more likely to trade in games, open marketing emails, and buy products. Members spend on average $400 per year at GameStop.
Clearly, the company appreciates the dangerous strategic waters of other brick-and-mortar media companies, many of which have closed their doors due to competition. Sales and net revenue were declining as of 2016, but time will tell if GameStop’s strategies will pay off.
Discussion Questions
State Vision, Mission, and Purposes/Values of the company in a new E-business setting
What role has information systems assessment played in the case you identified? Know where you start.
How has GameStop used information systems to compete more effectively? Know where you want to go.
What strategic actions (guidelines) will GameStop need to take to protect its business? Know how you are going to get there.
Perform a SWOT analysis of the company in the current setting. What are the implications of the SWOT analysis for GameStop? Know how well equipped you are to get there.
References
Vision, Mission, And Purpose: The Difference (forbes.com)
Your Company’s Purpose Is Not Its Vision, Mission, or Values (hbr.org)
Mission Statement vs. Company Values vs. Vision: Difference and Best Practices - Status Articles
Embrace digital trends: Staying up to date with emerging digital trends is crucial. GameStop should monitor advancements
To adequately address the questions related to the case study on GameStop, it's important to note that the information provided is based on the knowledge available up until my last training data in September 2021. Therefore, some of the specific details may have changed or evolved since then. However, I can still provide a general analysis and guidance based on the information provided. State Vision, Mission, and Purposes/Values of the company in a new E-business setting:
Vision: The vision of GameStop could be to establish itself as the leading destination for gamers by providing a comprehensive gaming experience that combines both physical and digital offerings. This would include offering a wide range of gaming products, services, and experiences through both brick-and-mortar stores and an e-commerce platform. Mission: GameStop's mission might be to create a unique gaming ecosystem that caters to the needs and preferences of gamers, providing them with access to the latest games, consoles, and gaming accessories while fostering a sense of community among gamers. Purposes/Values: GameStop's purposes and values could include aspects such as customer-centricity, innovation, quality, community-building, and embracing both physical and digital gaming experiences. What role has information systems assessment played in the case you identified? Know where you start.
Information systems assessment plays a crucial role in GameStop's case as it helps the company understand the evolving digital landscape and identify areas where technology can be leveraged to enhance its competitiveness. It involves evaluating the company's current information systems infrastructure, identifying strengths and weaknesses, and determining the opportunities and threats in the market. An assessment of information systems helps GameStop understand its starting point in terms of its technological capabilities, allowing it to make informed decisions on the necessary steps to improve and adapt its systems to the changing business environment. How has GameStop used information systems to compete more effectively? Know where you want to go.
GameStop has utilized information systems to improve its competitive position in several ways: a. Online store and e-commerce: GameStop has expanded its business to include an online store, allowing customers to purchase new and used products online. This strategy enables the company to tap into the growing e-commerce market and reach a wider customer base beyond its physical stores. b. Trade-in deals and loyalty program: GameStop has leveraged information systems to implement a loyalty program called PowerUP Rewards. This program collects data on customers' preferences, gaming habits, and purchasing behavior, enabling GameStop to personalize promotions and marketing efforts. By offering trade-in deals and rewards, the company aims to increase customer loyalty and encourage repeat business. c. Market intelligence and targeted marketing: GameStop collects and analyzes customer data through its information systems, gaining insights into customers' preferences and gaming trends. This information helps GameStop develop targeted marketing campaigns and tailor its product offerings to specific customer segments, improving its overall effectiveness in attracting and retaining customers.
What strategic actions (guidelines) will GameStop need to take to protect its business? Know how you are going to get there.
To protect its business, GameStop should consider the following strategic actions:
a. Enhance the online presence: GameStop should continue investing in its e-commerce platform and online store to strengthen its digital presence. This involves ensuring a user-friendly and seamless online shopping experience, expanding the digital product catalog, and optimizing the website for search engines to increase visibility.
b. Diversify revenue streams: GameStop could explore additional revenue streams beyond physical game sales, such as digital game downloads, subscriptions, streaming services, and partnerships with game developers or publishers. This diversification can help reduce reliance on the used-game market and mitigate the impact of changing industry dynamics.
Learn more about GameStop here:
https://brainly.com/question/29829342
#SPJ11
the purchase agreement has a section called the escrow holder acknowledgment. the escrow officer completes this section with all of the following information, except:
The escrow officer completes the escrow holder acknowledgment section with all the necessary information except for the escrow holder's signature.
The escrow holder acknowledgment section in a purchase agreement typically includes information such as the name of the escrow holder, their contact information, and their acknowledgment of their role in the transaction.
This section serves as a confirmation that the escrow holder has received and will hold the funds or documents related to the transaction in a neutral and secure manner until the specified conditions are met. It is an important step in the escrow process to ensure transparency and accountability.
However, the escrow holder's signature is not typically included in this section. The escrow holder's signature may be required on other sections of the purchase agreement or on separate escrow documents, but it is not specifically part of the escrow holder acknowledgment section.
The omission of the escrow holder's signature from this section does not invalidate the agreement or the role of the escrow holder in the transaction.
Learn more about purchase agreement here:
https://brainly.com/question/32482127
#SPJ11
Maple Media is considering a proposal to enter a new line of
business. In reviewing the proposal, the
company's CFO is considering the following facts:
The new business will require the company to pur
The Net Present Value is a measure of the project's profitability and indicates whether the project will add value to the company. A positive NPV means the project is expected to generate more cash inflows than the initial investment and is considered financially viable. In this case, the NPV of $536,697 suggests that the project is expected to create value for Maple Media.
The project's net present value (NPV) can be calculated by subtracting the initial investment from the present value of the expected cash flows as follows:
1. Calculate the annual cash flows:
- Sales: The new business is expected to generate $2 million in sales each year (at t=1,2, and 3).
- Operating costs: The operating costs excluding depreciation are expected to be $1.4 million per year.
- Depreciation: The annual depreciation will be $200,000 per year at t=1,2, and 3.
2. Calculate the annual net cash flows:
- Subtract the operating costs (excluding depreciation) and the depreciation from the sales to get the annual net cash flows.
3. Calculate the present value of the annual net cash flows:
- Apply a discount rate of 12% to each annual net cash flow to calculate the present value of each cash flow.
- Add up the present values of the three annual net cash flows.
4. Calculate the salvage value at the end of three years:
- The fixed assets will be sold at a salvage value of $100,000.
5. Calculate the net cash flow at t=3:
- Add the salvage value to the net cash flow at t=3.
6. Calculate the present value of the net cash flow at t=3:
- Apply a discount rate of 12% to the net cash flow at t=3 to calculate its present value.
7. Calculate the total present value of the cash flows:
- Add the present value of the three annual net cash flows and the present value of the net cash flow at t=3.
8. Calculate the NPV:
- Subtract the initial investment ($600,000) and the increase in net operating working capital ($50,000) from the total present value of the cash flows.
Based on the calculations, the project's NPV is $536,697 (option b).
Learn more about net present value:
brainly.com/question/13228231
#SPJ11
you have been invited to participate in a project to design a new ATM for ACME Sdn Bhd. ACME is the leading supplier of ATM machines for banks in Southeast Asia and their ATM machine is known to be the most reliable with little to no known fault and requires very little maintenance. At the project kick off meeting, the sponsor of the project at ACME briefed the team and, due to your engineering background, you were appointed as the design lead! At the first meeting with the team, after everyone have introduced themselves, Johnny, a designer who had recently graduated from the world-famous Northumbria Design School and is known for a number of award winning designs in Europe and Japan while he was a student at Northumbria, asked what design process you would adopt for the project. He is very keen to learn the design process from an engineering perspective. How would you start the project? What would your initial priority be? And why is this priority important? What tool(s)/technique(s) will you employ?
As the design lead for the new ATM project at ACME Sdn Bhd, my initial priority would be to gather comprehensive requirements from stakeholders and understand the needs of the users and the business.
This step is crucial because it lays the foundation for the entire design process and ensures that the final product meets the expectations and goals of ACME and its customers.
To achieve this, I would employ various tools and techniques such as interviews, surveys, and focus groups to engage with stakeholders and gather their insights and feedback. This approach would allow us to gain a deep understanding of user requirements, pain points, and preferences, which would inform our design decisions.
Starting the project by gathering comprehensive requirements is essential for several reasons. Firstly, it enables us to identify and address any specific needs or challenges faced by ACME or its customers.
By engaging with stakeholders, we can gain insights into their expectations, preferences, and pain points, ensuring that the new ATM design effectively addresses their needs.
Secondly, understanding the business goals and objectives is crucial to align the design with the strategic direction of ACME. By incorporating the business requirements, we can create a design that not only meets user needs but also contributes to ACME's success and competitiveness in the market.
To gather requirements, various tools and techniques can be employed. Interviews with stakeholders, such as representatives from ACME and potential ATM users, allow us to have in-depth conversations to uncover their specific requirements and expectations.
Surveys can be conducted to collect quantitative data and opinions from a larger user base, providing valuable insights into user preferences and patterns. Focus groups can be organized to facilitate group discussions and gather diverse perspectives.
These methods, combined with observation and analysis of existing ATM usage patterns and feedback, provide a comprehensive understanding of user needs and guide the design process effectively.
Learn more about Stakeholder:
brainly.com/question/32720283
#SPJ11
what are the three gases that make baked products rise?
The three gases that make baked products rise are carbon dioxide, steam, and air.
When baking, the rise of baked products is achieved through the release of gases. The three main gases responsible for this process are carbon dioxide (CO2), steam (water vapor), and air.
Carbon dioxide is generated through the reaction between baking soda (sodium bicarbonate) and an acid, such as cream of tartar or buttermilk. This reaction produces carbon dioxide gas, which gets trapped in the dough or batter, causing it to rise.
Steam is produced when the moisture in the dough or batter evaporates due to the heat of the oven. As the water vaporizes, it creates steam, which expands and contributes to the rise of the baked goods.
Air is also a key component in making baked products rise. During the mixing and beating process, air is incorporated into the mixture. When the batter or dough is heated in the oven, the air trapped within expands, creating pockets and causing the baked goods to rise.
Learn more:About gases here:
https://brainly.com/question/1369730
#SPJ11
Elaborate the performance management processes ) of each the bank workers listed below in Bangladesh in the perspective of the Human Resource Department. Please write about all 12 positions mentioned below.PLEASEEEEEE
1. Managing director 2. Functional director 3. Branch manager 4. Assistant manager 5. Junior officer 6. Clark 7. Secretary 8. Assistant 9. Security guards 10. Drivers 11. Sweepers 12. Cleaners
The HR department plays a crucial role in establishing performance expectations, conducting evaluations, providing feedback, and offering support and training for all positions listed, ensuring that each employee contributes to the overall success of the organization.
1. Managing Director: The performance management process for the Managing Director involves setting strategic goals, defining key performance indicators (KPIs), and evaluating overall organizational performance.
2. Functional Director: The HR department establishes performance goals and KPIs for the Functional Director based on their functional area responsibilities.
3. Branch Manager: The HR department sets performance objectives for the Branch Manager, including financial targets, customer satisfaction, and operational efficiency.
4. Assistant Manager: The HR department establishes performance expectations for Assistant Managers, focusing on their specific roles and responsibilities.
5. Junior Officer: The HR department sets performance standards for Junior Officers, defining their responsibilities and expected outcomes.
6. Clerk: The HR department defines performance expectations for Clerks, emphasizing accuracy, timeliness, and adherence to organizational processes.
7. Secretary: The HR department establishes performance goals for Secretaries, focusing on their administrative and organizational skills.
8. Assistant: The HR department sets performance standards for Assistants, considering their specific job responsibilities.
9. Security Guards: The HR department defines performance expectations for Security Guards, including maintaining a safe and secure environment.
10. Drivers: The HR department establishes performance criteria for Drivers, such as punctuality, safety, and vehicle maintenance.
11. Sweepers: The HR department sets performance expectations for Sweepers, focusing on cleanliness, hygiene, and maintaining a pleasant working environment.
12. Cleaners: The HR department defines performance standards for Cleaners, emphasizing their role in maintaining cleanliness and hygiene.
Learn more about Human Resource Department here:
brainly.com/question/30485557
#SPJ11
Donald Trump as a Business Brand and failure of Trump Airlines.
What did go wrong?
The failure of Trump Airlines can be attributed to high operational costs, fierce competition, overexpansion without sufficient demand, an economic downturn, and mounting financial troubles. These factors combined to create an unsustainable business model for Trump Airlines, ultimately leading to its demise.
Donald Trump is a well-known business brand, with ventures in real estate, entertainment, and even politics. However, one of his business ventures, Trump Airlines, experienced significant failure. Several factors contributed to the downfall of Trump Airlines.
1. High Costs: Trump Airlines was launched in 1988 with a fleet of Boeing 727 aircraft. These aircraft were expensive to purchase and maintain. The high operational costs placed a heavy financial burden on the airline, making it difficult to generate profits.
2. Competition: The airline industry is highly competitive, and Trump Airlines faced fierce competition from established carriers. Established airlines had well-established routes, loyal customer bases, and extensive networks, making it challenging for Trump Airlines to compete effectively.
3. Overexpansion: Trump Airlines expanded too quickly, adding more routes and aircraft without ensuring sufficient demand. This led to overcapacity, resulting in low passenger numbers and decreased revenue. Overexpansion without careful market analysis can be detrimental to any business, including airlines.
4. Economic Downturn: The early 1990s saw an economic recession, which negatively impacted the airline industry. The downturn reduced air travel demand, leading to decreased revenue for airlines across the board. Trump Airlines was not immune to these economic challenges and suffered financial losses as a result.
5. Financial Troubles: Trump Airlines faced significant financial difficulties, accumulating debts of around $150 million. These debts became overwhelming and led to the airline's bankruptcy filing in 1992.
Learn more about operational costs:
https://brainly.com/question/14697297
#SPJ11
Waterway Corporation's December 31, 2020 balance sheet showed the following:
8% preferred stock, $20 par value, 69400 shares
authorized: 49400 shares issued
$988000
Common stock, $10 par value, 6750000 shares authorized;
6650000 shares issued, 6610000 shares outstanding
66500000
Paid-in capital in excess of par-preferred stock
125500
Paid-in capital in excess of par-common stock
54000000
Retained earnings
15350000
Treasury stock (69400 shares)
1261000
Waterway's total paid-in capital was
$121613500.
$122874500.
$120352500.
$54125500,
Waterway Corporation's total paid-in capital is $122,013,500. This includes the par value of the preferred and common stock, as well as the additional amount paid by shareholders above the par value. The total paid-in capital represents the total amount of capital contributed by shareholders to the company.
Waterway Corporation's total paid-in capital can be calculated by summing up the preferred stock, common stock, and the two paid-in capital amounts.
To calculate the total paid-in capital, we need to add the following:
1. Preferred stock: Waterway Corporation has 69,400 shares of 8% preferred stock with a par value of $20. This means that the total par value of the preferred stock is 69,400 * $20 = $1,388,000.
2. Common stock: Waterway Corporation has 6,650,000 shares of common stock with a par value of $10. The total par value of the common stock is 6,650,000 * $10 = $66,500,000.
3. Paid-in capital in excess of par-preferred stock: This is an additional amount that shareholders paid above the par value of the preferred stock. The total paid-in capital in excess of par-preferred stock is $125,500.
4. Paid-in capital in excess of par-common stock: Similar to the above, this is the additional amount paid by shareholders above the par value of the common stock. The total paid-in capital in excess of par-common stock is $54,000,000.
Now, let's calculate the total paid-in capital:
Total paid-in capital = Preferred stock par value + Common stock par value + Paid-in capital in excess of par-preferred stock + Paid-in capital in excess of par-common stock
= $1,388,000 + $66,500,000 + $125,500 + $54,000,000
= $122,013,500
Based on the given information, Waterway Corporation's total paid-in capital is $122,013,500.
The total paid-in capital represents the total amount of capital contributed by shareholders to the company. It consists of the par value of preferred and common stock, as well as any additional amount paid by shareholders above the par value. In this case, we added the par values of the preferred and common stock and the excess paid-in capital for both types of stock to calculate the total paid-in capital.
Learn more about total paid-in capital: https://brainly.com/question/29512166
#SPJ11
Find the Beta for ExxonMobile (from Yahoo Finance) and explain
what it means.
Beta is a measure of a stock's volatility in relation to the overall market. It indicates how sensitive a stock's price movement is compared to changes in the broader market.
A Beta value less than 1 suggests that the stock is less volatile than the market, while a Beta greater than 1 indicates higher volatility. For example, a Beta of 1.5 means the stock is likely to move 1.5 times more than the overall market.
If you can provide the current Beta value for ExxonMobil, I can help you interpret its meaning in more detail. In general, a higher Beta implies greater risk but also potentially higher returns. It is an important metric for investors to assess the relative volatility of a stock and its potential impact on their investment portfolio.
Remember, it's always a good idea to conduct thorough research and consult with a financial advisor before making any investment decisions.
Learn more about volatility from a given link :
https://brainly.ph/question/235526
#SPJ11
On January 1, 2019, Ice Company purchased a machinery for
$30,000. The machinery has an estimated useful life of five years
with a residual value of $5,000. How much is the accumulated
depreciation of
The accumulated depreciation of the machinery would be $25,000 after one year. Each year, the accumulated depreciation would increase by $5,000.
To calculate the accumulated depreciation, we need to determine the annual depreciation expense. The machinery was purchased for $30,000 and has a residual value of $5,000 after five years. Therefore, the depreciable cost is $30,000 - $5,000 = $25,000.
To find the annual depreciation expense, we divide the depreciable cost by the useful life in years. In this case, $25,000 / 5 years = $5,000 per year.
In the first year, the accumulated depreciation would be equal to the annual depreciation expense, which is $5,000. Therefore, after one year, the accumulated depreciation of the machinery would be $5,000.
Each subsequent year, the accumulated depreciation would increase by $5,000. So after two years, it would be $10,000, after three years it would be $15,000, and so on. After five years, the accumulated depreciation would equal the depreciable cost of $25,000.
To know more about accumulated depreciation visit:
https://brainly.com/question/32148597
#SPJ11
can
somone tell me what tax codes apply to this problem? thanks :)
Research Problem 1. Terry owns real estate with an adjusted basis of \( \$ 600,000 \) and a fair market value of \( \$ 1,100,000 \). The amount of the nonrecourse mortgage on the property is \( \$ 2,5
The two tax codes that apply to this problem are IRC §1091 and IRC §1017.
IRC §1091 is a "phantom loss" provision that prevents taxpayers from taking a tax deduction for a loss that is not actually realized.
In this case, Terry does not actually lose any money when she sells the property, because the amount of the nonrecourse debt that she is relieved of is equal to the amount of the loss she would have realized.
However, IRC §1091 requires her to treat the amount of the nonrecourse debt that exceeds the fair market value of the property as a realized loss.
IRC §1017 allows taxpayers to increase their basis in property that they acquire if they subsequently acquire more than an adequate basis in the property.
In this case, Terry will be able to increase her basis in the property by the amount of the nonrecourse debt that exceeds the fair market value of the property.
This will allow her to deduct depreciation and other expenses against a larger basis, which could save her money on taxes.
To learn more about expenses here
brainly.com/question/29850561
#SPJ11
