Given what we know, we can confirm that whole-tire recycling has advantages for the environment, as well as economic disadvantages.
What are the Pros and Cons of recycling tires?Tires are made from rubber mixed with other substances such as steel and certain polyester fibers. This makes the tires a poor source of rubber and said rubber would not be of great quality when recycling, this along with the high cost of the process entails the disadvantages of recycling tires. The advantage, however, is environmental, as tires take up a great portion of the space in landfills and greatly pollute the air when burning.
Therefore, we can confirm that whole-tire recycling has advantages for the environment, as well as economic disadvantages due to its poor quality material and high cost of recycling.
To learn more about recycling visit:
https://brainly.com/question/11861824?referrer=searchResults
Pick the right answer
write different Betweens
Three point starter and four point starter~
Ty ~
The most significant difference between the three point and the four-point starter is that in three-point starter the no voltage coil (NVC) is connected in series with the field winding whereas in four-point starter the NVC is directly connected to the supply voltage.
☆...hope this helps...☆
_♥︎_mashi_♥︎_
problem: Asteroid Field.
Answer:
An asteroid is a minor planet of the inner Solar System. Historically, these terms have been applied to any astronomical object orbiting the Sun that did not resolve into a disc in a telescope and was not observed to have characteristics of an active comet such as a tail.
Most newer homes are built with a circuit breaker that can
handle a maximum of 200 A of current. If a home is using
the maximum amount of current possible, which is flowing
every 2 seconds, how many coulombs of charge are flowing
into the house? Explain.
The coulombs of charge which are flowing into the house is 400 coulombs.
What is Electric charge?This is the physical property of matter that causes it to experience a force when placed in an electromagnetic field and its unit is Coulomb.
Electric charge(Q) = It where I is current and t is time
Q = It
= 200A × 2s
= 400 coulombs
Read more about Electric charge here https://brainly.com/question/2373424
The headlights of a typical car are powered by a 12 v battery. What is the resistance of the headlights if they draw 3.0 A if a current when turned on
Answer:
4 ohms
Explanation:
V = I R
12 = 3 R
R = 4 ohms
.
A bowling ball has a mass of 3 kg & is moving at a speed of 10 m/s.
What is its kinetic energy?
Answer:
150 j
Explanation:
K.E. = 1/2 m v ^2
= 1/2 * 3 * 10^2 = 150 j
Hello people ~
On charging by conduction, mass of a
body may
(a) increase
(b) decreases
(c) increase or decrease
(d) None of these
increase or decrease
body gains mass when gets negative charge/electronsbody losses mass when gets positive charge/losses electrons
Thus the mass may increase and decrease due to conduction || varies
What is the energy of a single photon of visible light with a wavelength of 500.0 nm? 1 nm=10^−9 m
1. 3.97×10^−19 J
2. 84×10^14 J
2. 02×10^18 J
4. 95×10^−19 J
Answer:
3.97×10^−19 J
From the planks equation
E=hv
V= c/ wave length
V= 3×10^8/500×10^-9
=6×10^14
E= hv
6.63×10^-34×6×10^14
= 3.97×10^−19 J
Explanation:
A light wave was calculated to have a length of 4x10^-7 m. what would the energy in the wave be?
λ = 5 x 10^-7 m, i.e the wavelength
to find:the energy in the wave.
solution:= c / λ
c =( 3 x 10^ 8 m/s)
f = 3x10^8ms-¹ /5 x10^-7m
= 6x10^14 Hz.
Net force of on a vehicle that is accelerating at a rate of one. 5 M/S squared is 1999 N what is the mass of the vehicle to the nearest kilogram
How much heat does it take to melt a 0.234 kg ice cube at its melting point?
Answer:
Q = M kg* 3.33E5 J / kg = .234 * 3.33E5 = 7.79E4 Joules
As a check (using 80 cal/gm as latent heat of fusion for water)
234 g * 80 cal/gm = 18720 cal
1 cal = 4.19 J
18720 cal * 4.19 J / cal = 7.7E4 J agrees with value found above
A train travels north at 103 km/hr. Is this an example of speed, velocity, or acceleration?
Answer:
velocity
Explanation:
when a speed is given with a direction it is velocity
Answer:
Velocity
Explanation:
Velocity is the rate, and direction of an objects movement.
Speed is the rate of and objects movement, no certain direction.
Acceleration is the rate when velocity changes over time, it can both increase and decrease, and it has both speed and direction.
I hope this helps! Have a great day!
Your Murderer~
Question 7 of 10
Which of the following phrases best describes the term scientific model?
A. A simplified representation used to explain or make predictions
about something
B. The application of scientific knowledge to make predictions about
an object, system, or process
C. A physical copy of a scientific object, system, or process
Answer:
my answer to that question was c
Explanation:
a material used by living things for growth and other life functions is a?
Answer:
I believe it wouled be Nutrients
Explanation:
hope this helps if not please let me know
Uranus and Neptune are called “ice giants” because they experience very low temperatures. This is due to the fact that these two planets are very far from the
Answer:
Sun :)
Explanation:
Uranus and neptune are the planets farthest from the sun (a heat source). :)
Have an amazing day!!
Please rate and mark brainliest!!
Visible light has a range of wavelengths from about 400-750 nm. Which of these wavelengths is
most likely seen as the color red?
Answer:
600-750
Explanation:
The red color in the visible region lies in the wavelength of 600 – 750 nm. The visible light spectrum is the fraction of the spectrum that is visible to humans.
What is wavelength ?The distance between two successive troughs or crests is known as the wavelength. The peak of the wave is the highest point, while the trough is the lowest.
The wavelength is also defined as the distance between two locations in a wave that have the same oscillation phase.
The length of a wave is measured in its propagation direction. The wavelength is measured in meters, centimeters, nanometers, and other units since it is a distance measurement.
The portion of the spectrum visible to the human light is known as the visible light Spectrum.
Visible light has a range of wavelengths from about 400-750 nm. The red color in the visible region lies in the wavelength of 600 – 750 nm.
To learn more about the wavelength, refer to the link;
brainly.com/question/7143261
#SPJ2
1. A woman shuts her summer cottage up in September and returns to June. No one has entered the cottage in the meantime
Explain what she is likely to find, in terms of the second law of thermodynamics.
The hot summer cottage she left in September will still be hot when she returns in June as long as no one enters it (Isolated).
What is second law of thermodynamics?The second law of thermodynamics states that, hot things always cool unless you do something to stop them. Or the total entropy of an isolated system can never decrease.
In other words, not all heat energy can be converted into work in a cyclic process.
Therefore, we can conclude that when the woman returns, the hot summer cottage she left in September will still be hot when she returns in June as long as no one enters it (Isolated).
Learn more about second law of thermodynamics here: https://brainly.com/question/1022530
Second Exercise: The circuit breaker in a kitchen (6.5 points) The electrical installation in a kitchen is fed by a sinusoidal alternating voltage of effective value U = 220 V. This installation includes the following electrical appliances: A refrigerator; A washing machine; An electric water heater (which can be considered as a resistor) of power P = 1540 W; An incandescent lamp carrying the following indications (220 V, 100 W). . 1) These electrical appliances are connected in parallel. Why? 226
Answer:
can you clear more I don't understand
Whoever is good at physics, can you help me with these questions?
Answer:
i honestly do not know the awnser , im just setting up my brainly account
Answer:
Q)32) What is the unit of intensity of sound
Ans)Decibel
Q)33) Relate amplitude and distance to the intensity and loudness of sound
Ans)The average amount of energy passing through a unit area per unit of time in a specified direction is called the intensity of the wave. As the amplitude of the sound wave increases, the intensity of the sound increases. (i can't find the answer for distance and loudness i can't find it on g....o...o....g....l.....e and my textbook u will have to search it on ur own sorry)
Q)34) What is the pitch of sound
Pitch is the rise and fall of our voice when we speak. It is the characteristic of sound by which we can distinguish the sounds of the same loudness. Types: Pitch is generally of two types, high pitch and low pitch. High Pitch: The higher the frequency of the sound, the higher will be the pitch.
Q)35) How is pitch of sound related to its frequency of sound waves?
The sensation of a frequency is commonly referred to as the pitch of a sound. The pitch of the sound we hear depends on the frequency of the sound wave. A high frequency sound wave has a high pitch, and a low frequency sound has a low pitch.
Q)36) Define the Doppler effect?
The apparent change in the frequency of sound due to the relative motion between the source and the observer is called the Doppler effect.
Q)37) Explain why the doppler effect occurs
The Doppler effect, or Doppler shift, occurs when the movement of an observer relative to a source (or vice versa) causes a change in wavelength or frequency.
Sorry i can't find the last one i will try to search it afterwards
What is the wasted energy in each of the energy transfers?
a) clockwork toy
b) boy kicking a football
c) boiling kettle on a gas ring
d) person walking upstairs
Answer:
a person walking upstairs is a wasted energy
An erect object is 50 cm from a concave mirror of radius 60 cm. In the situation above, the object is moved to a new position, such that the new lateral magnification is 2.5. The new object distance, in cm, is closest to:
For an erect object is 50 cm from a concave mirror of radius 60 cm. In the situation above, the object is moved to a new position, the new object distance is mathematically given as
u = -18cm
What is the new object distance?
Generally, the equation for magnification is mathematically given as
1/f = 1/v +1/u
therefore,
-1/30 = 1/v + 1/u
v = -2.5u
Hence,
-1/30 = -1/2.5u + 1/u
-1/30 = (3/5)u
u = -18
In conclusion, the new object distance is
u = -18cm
Read more about Lens
https://brainly.com/question/13161236
Which name is given to the force that stretches the spring with a metal that weights it down
Answer:
gravity
Explanation:
ok what i understand from your query is that a spring balance with a metal piece attached to it is weighing it down, a spring balance is measured in newtons (f=ma), the acceleration part is gravity (-9.81 m/s^2). The metal piece is attached to the string.
hope this answers your question and please take my answer with a grain of salt and refer to some webpages or videos
An ideal gas, initially at a volume of 2.4 L and
pressure of 5 kPa, undergoes isothermal expansion until its volume is 6 L and its pressure
is 2 kPa.
A) Calculate the work done by the gas during
this process.
Answer in units of J.
B) find the heat added to the gas during this process.
Answer in units of J.
(a) The work done by the gas during this process is -10.8 J.
(b) The heat added to the gas during this process is 10.8 J.
Work done by the gas against an external pressureThe work done by the gas during the isothermal expansion is calculated as follows;
W(net) = ΔP x ΔV
W(net) = (2 kPa - 5 kPa) x (6L - 2.4 L)
W(net) = (-3kPa) x 3.6L
W(net) = -10.8 kPa.L
W(net) = -10.8 J
Heat added to the gasW = - Q
-10.8 J = -Q
Q = 10.8 J
Learn more about isothermal expansion here: https://brainly.com/question/17192821
Why are alloys made from many metals
Answer:
It add strength to the metal, along with other enhanced chemical properties. Hardness, machinability, and corrosion resistance are other properties that can be added or enhanced by creating an alloy.
I hope my answer helps you.
A plane's propeller has a rotational inertia of 2.0kg * m ^ 2 After a clockwise torque of 4.0Nm was applied to the propeller for 4.0s, the propeller has a clockwise angular speed of 24 * (rad)/s What was the initial angular momenturn of the propeller before the torque was applied ?
The initial angular momentum of the propeller before the torque was applied will be 32 kg m²/s.
What is torque?Torque is the force's twisting action about the axis of rotation. Torque is the term used to describe the instant of force. It is the rotational equivalent of force. Torque is a force that acts in a turn or twist.
The amount of torque is equal to force multiplied by the perpendicular distance between the point of application of force and the axis of rotation.
The given data in the problem is;
The rotational inertia is,I = 2.0 kg m²
The clockwise torque is, T = 4.0Nm
The time period is,t= 4.0s,
The angular speed is,ω= 24 * (rad)/s
The initial angular momentum of the propeller is,I₀
The angular acceleration is found by the relation;
[tex]\rm \tau = I \times \alpha \\\\ \alpha =\frac{\tau}{i} \\\\ \alpha =\frac{4.0}{2.0} \\\\ \alpha= 2.0 \ rad/sec^2[/tex]
The initial angular velocity is found as;
[tex]\rm \omega_f = \omega_0 + \alpha t \\\\ \omega_0 = \omega_f -\alpha t \\\\ \omega_0 =24 -[(-2.0)\times 4.0)] \\\\ \omega_0 = 16 \ rad/sec[/tex]
The initial angular momentum of the propeller is found as;
[tex]\rm L_0 = I \omega_0 \\\\ L_0 = 20 \times (1.6) \\\\ I_0 = -32 \ kgm^2/s[/tex]
Hence,the initial angular momentum will be 32 kg m²/s.
To learn more about the torque, refer to the link;
brainly.com/question/6855614
#SPJ1
Answer: 14 kg•m2/s
Explanation:
Trust me it’s from khan
Diagram of simple cell and dry cell
Answer:
Please see the file attached
A student measures the voltage and current between two points in an electrical circuit. If the voltage is 220 V and the current is 1.2 A, what is the resistance, according to Ohm's law?
A. 2190
B. 2640
C. 1830
D. 0.0050
Answer:
Your answer is C
Explanation:
V=IxR
220 divide by 1.2=183.0
The answer was probably a type error so it should be C
g Two point charges -6 C and -8 C charge are 12 cm apart. What is the magnitude of the electric field at a point half-way between the two charges
Explanation:
q1 = -6
q2 = -8
d^2 = (6/100)^2 = 0.0036
k = 1/4*(pi*E) where E js the permittivity of free space
F = (k*q1*q2)/(d^2)
Substitute your values into this equation and solve
The downward motion of an elevator is controlled by a cable that unwinds from a cylinder of radius 0.20 m. what is he angular velocity of the cylinder when the downward speed of the elevator is 1.2 m/s
The angular velcoity of this cylinder when the downward speed of the elevator is 1.2 m/s would be 6 rad/s.
Given the following data:
Radius of cylinder = 0.20 meter.
Linear velocity = 1.2 m/s.
What is angular velocity?Angular velocity can be defined as the rate of change of angular displacement of an object with respect to time. Thus, it is a measure of how fast and quickly an object revolves or rotates relative to another point or how its angular position changes with respect to time.
The formula for angular velcoity.Mathematically, angular velcoity is given by this formula:
[tex]V =r\omega\\\\\omega =\frac{V}{r}[/tex]
Substituting the given parameters into the formula, we have;
[tex]\omega = \frac{1.2}{0.2}[/tex]
Angular velocity = 6 rad/s.
Read more on angular velcoity here: https://brainly.com/question/6860269
What is the angular speed, in rad/s, of a flywheel turning at 813. 0 rpm?.
Answer:
The angular speed will be 85.13 rad/sec
Explanation:
