What are the differences between theoretical
probability, subjective probability and experimental probability?
Provide an example for each one with reference to rolling a pair of
dice.

Answers

Answer 1

Probability is the study of random occurrences, with various approaches that quantify the likelihood of occurrence. Here are the differences between theoretical probability, subjective probability, and experimental probability.

Theoretical probability: It is the probability based on mathematical theories that are used to calculate the probability of a certain event occurring. Theoretical probability is used when there are equal outcomes for every event, making the event random, such as flipping a coin or rolling a die.

Example: When rolling a pair of dice, the theoretical probability of getting a sum of 6 would be 5/36.

Because there are only five possible ways to get a sum of 6 in rolling a pair of dice, but there are 36 total combinations possible.

Subjective probability: It is a probability that is based on personal judgment or opinions, and therefore varies from person to person. This type of probability is used when there is insufficient information to establish the probability precisely, and different people may have different opinions.

Example: When rolling a pair of dice, a person who believes that rolling a sum of 6 is more likely than other values might assign a higher probability of 0.2 or 20%.

Experimental probability: It is the probability determined by conducting a series of trials or experiments to determine the likelihood of an event occurring. This type of probability is used when the likelihood of an event cannot be calculated, and empirical evidence is needed to determine the probability of an event.

Example: When rolling a pair of dice, if we roll them 100 times and get a sum of 6 20 times, the experimental probability of rolling a sum of 6 would be 20/100 or 0.2 or 20%.

Know more about the experimental probability.

https://brainly.com/question/8652467

#SPJ11


Related Questions

Assume the quarterback and the receiver are in the same place as in the previous example. This time, however, the quarterback throws the ball at velocity of 40 mph and an angle of 45°. Write the initial velocity vector of the ball, v, in component form. 15 =

Answers

The initial velocity vector of the ball, v, in component form, was approximately 28.3i + 28.3j. This tells us the velocity of the ball in the x and y directions, respectively.

To write the initial velocity vector of the ball, v, in component form, we use the following equation:

v = vi + vj, where v is the initial velocity vector of the ball, vi is the velocity vector in the x-direction, and vj is the velocity vector in the y-direction.

We also know that the ball's velocity, v, equals 40 mph, and the angle between the ball's initial velocity and the horizontal, θ, is 45°. We can use trigonometric functions to solve for vi and vj. Specifically, we know that:

sin(θ) = vj / vvj

= v * sin(θ)cos(θ)

= vi / vvi

= v * cos(θ)

Plugging in the values we know, we get:

vj = 40 * sin(45°)

≈ 28.3 mph

vi = 40 * cos(45°)

≈ 28.3 mph

Therefore, the initial velocity vector of the ball, v, in component form is: v = 28.3i + 28.3j. Hence, we can write the initial velocity vector of a ball thrown by a quarterback to a receiver in component form by using the velocity and angle of the ball.

Specifically, we can break up the velocity vector into components in the x and y directions and find the values of these components using trigonometric functions. Once we have these values, we can write the initial velocity vector of the ball in component form.

To know more about the velocity vector, visit:

brainly.com/question/13492374

#SPJ11

Evaluate the integral. 6) ∫−3xsin7xdx You may use the formula: ∫udv=uv−∫vdu

Answers

The resultant integral is: ∫ −3xsin 7x dx = 3xcos 7x/7 - 3/49 sin 7x + C'

To evaluate the integral ∫ −3xsin 7x dx using the integration by parts formula, we will first define u and dv, apply the formula and solve the resulting integral using integration by substitution.

Let us begin by defining u and dv as:

u = -3xdv = sin 7x dx

Applying the integration by parts formula, we have

∫ −3xsin 7x dx = ∫u

dv = uv - ∫v du= -3x (-cos 7x/7) - ∫-cos 7x/7 d(-3x)= 3xcos 7x/7 - 3/7 ∫cos 7x dx

We can now solve the integral ∫cos 7x dx by applying the substitution method.

Let z = 7x, then dz/dx = 7

⇒ dx = dz/7

Substituting into the integral, we get

∫cos 7x dx

= (1/7) ∫cos z dz

= (1/7) sin z + C

= (1/7) sin 7x + C'

where C' is the constant of integration.

We can now substitute back into the integration by parts formula to obtain the final solution of the integral as:

∫ −3xsin 7x dx = 3xcos 7x/7 - 3/7 (1/7) sin 7x + C'

= 3xcos 7x/7 - 3/49 sin 7x + C'

Therefore, ∫ −3xsin 7x dx = 3xcos 7x/7 - 3/49 sin 7x + C'

Know more about integral here:

https://brainly.com/question/30094386

#SPJ11

If 25 days after a $640.00 loan is charged, it costs $850.00 to pay it off, what is the simple daily interest rate?
a. 2.11%
b. 2.71%
c. 1.01%
d. 1.31%​

Answers

The simple daily Interest rate is approximately 1.31%.The correct answer is d) 1.31%.

To find the simple daily interest rate, we can use the formula:

Interest = Principal × Rate × Time

Given:

Principal (loan amount) = $640.00

Amount to pay off = $850.00

Time = 25 days

We need to find the rate.

First, let's calculate the interest by subtracting the principal from the amount to pay off:

Interest = Amount to pay off - Principal

Interest = $850.00 - $640.00

Interest = $210.00

Now, let's calculate the daily interest rate:

Daily Interest Rate = (Interest / Principal) × (1 / Time)

Daily Interest Rate = ($210.00 / $640.00) × (1 / 25)

Calculating the expression:

Daily Interest Rate = (0.328125) × (0.04)

Daily Interest Rate = 0.013125

To convert the decimal to a percentage, we multiply by 100:

Daily Interest Rate = 0.013125 × 100

Daily Interest Rate = 1.3125%

Therefore, the simple daily interest rate is approximately 1.31%.

The correct answer is d) 1.31%.

For more questions on Interest .

https://brainly.com/question/25720319

#SPJ8

Establish the identity. \[ (1+\sec \theta)(1-\sec \theta)=-\tan ^{2} \theta \] Multiply and write the left side expression as the difference of two squares.

Answers

We have established the identity:

(1 + sec θ)(1 - sec θ) = (1 + sec θ)(tan^2θ + sec θ) = -tan^2θ

To establish the identity, let's start with the left side of the equation:

(1 + sec θ)(1 - sec θ)

We can use the identity: sec^2θ = 1 + tan^2θ

Substituting this into the expression, we have:

(1 + sec θ)(1 - sec θ) = (1 + sec θ)(1 - sec θ) = (1 + sec θ)(1 + tan^2θ)

Now, let's write the right side expression as the difference of two squares:

(1 + sec θ)(1 + tan^2θ) = (1 + sec θ)(tan^2θ + 1)

Using the distributive property, we can expand this expression:

(1 + sec θ)(tan^2θ + 1) = tan^2θ + sec θ + tan^2θ(sec θ) + sec θ

Now, simplify the expression:

tan^2θ + sec θ + tan^2θ(sec θ) + sec θ = tan^2θ(1 + sec θ) + sec θ(1 + sec θ)

Finally, notice that (1 + sec θ) is common to both terms, so we can factor it out:

tan^2θ(1 + sec θ) + sec θ(1 + sec θ) = (1 + sec θ)(tan^2θ + sec θ)

Therefore, we have established the identity:

(1 + sec θ)(1 - sec θ) = (1 + sec θ)(tan^2θ + sec θ) = -tan^2θ

Learn more about  established from

https://brainly.com/question/441178

#SPJ11

which value is equivalent to the expression shown? 3(1/4-2) + |-7|

Answers

The value that is equivalent is -7/4. Option C

What is a fraction?

A fraction is simply defined as the part of a whole number, a whole variable or a whole element.

The different types of fractions are;

Mixed fractionsProper fractionsImproper fractionsComplex fractions

From the information given, we have that;

3(1/4-2) + |-7|

find the lowest common multiple, we get;

3(1 - 8 /4) + 7

expand the bracket, we get;

3(-7/4) + 7

-21/4 + 7

-21 + 28/4

-7/4

Learn more about fractions at: https://brainly.com/question/11562149

#SPJ1

The complete question:

Which value is equivalent to the expression shown? 3(1/4-2) + |-7| is:

a. 7/4

b.7/2

c. -7/4

d. -7/2

Jacob is going on a road trip across the country. He covers 10 miles in
15 minutes. He then spends 10 minutes buying gas and some snacks at the
gas station. He then continues on his road trip.
Describe the distance traveled between 10 minutes and 15 minutes.

Answers

The distance covered between 10 minutes and 15 minutes is increasing

What is an equation?

An equation is an expression that shows the relationship between two or more numbers and variables.

Speed is the ratio of total distance travelled to total time taken. It is given by:

Speed = distance / time

From the graph:

The distance covered between 10 minutes and 15 minutes is increasing

Find out more on equation at: https://brainly.com/question/29797709

#SPJ1

Find the value of the following function at x = 2 and x = 3. Does the Intermediate Value Theorem guarantee that the function has a real zero between these two x- values? Answer f(x)= x³ + 5x² - 8x +

Answers

f(2) = 20, f(3) = 56 .Since the function does not change sign between x = 2 and x = 3 (both values are positive), the Intermediate Value Theorem does not guarantee that the function has a real zero between these two x-values.

To find the value of the function f(x) = x³ + 5x² - 8x + 8 at x = 2 and x = 3, we substitute these values into the function:

f(2) = (2)³ + 5(2)² - 8(2) + 8

     = 8 + 20 - 16 + 8

     = 20

f(3) = (3)³ + 5(3)² - 8(3) + 8

     = 27 + 45 - 24 + 8

     = 56

Therefore, f(2) = 20 and f(3) = 56.

To determine if the Intermediate Value Theorem guarantees that the function has a real zero between x = 2 and x = 3, we need to check if the function changes sign between these two x-values.

Evaluate f(2) = 20 and f(3) = 56:

f(2) = 20 is positive,

f(3) = 56 is positive.

Since the function does not change sign between x = 2 and x = 3 (both values are positive), the Intermediate Value Theorem does not guarantee that the function has a real zero between these two x-values.

Learn more about Intermediate Value Theorem here: https://brainly.com/question/29712240

#SPJ11

The complete question is:

Find the value of the following function at x = 2 and x = 3. Does the Intermediate Value Theorem guarantee that the function has a real zero between these two x- values? Answer f(x)= x³ + 5x² - 8x +8

Which Of The Following Series Converge To 2? 1. ∑N=1[infinity]N+32n 11. ∑N=1[infinity](−3)N−8 11. ∑N=0[infinity]2n1

Answers

Let's find out which of the given series converges to 2.1. ∑N=1∞N+32nNow, we need to find the sum of this series to know whether it converges to 2 or not.

So, we will use the formula of the sum of the series of n terms for this one. Sum of first n terms, S = n/2[2a + (n - 1)d], where a is the first term and d is the common difference. Hence, it is evident that the given series diverges to infinity because the terms are increasing with an increasing value of n and there is no common difference, which can neutralize the increasing terms.

So, the first series does not converge to 2.2. ∑N=1∞(−3)N−8In this series, the common ratio r is -3. If r > 1, then the series will diverge to infinity, and if -1 < r < 1, then the series will converge to a finite number.Now, let's check the common ratio: r = -3 < 1Therefore, this series will converge to a finite number.Let's calculate the sum of the given series Therefore, the given series diverges to infinity and does not converge to 2. Hence, the third series does not converge to 2.Therefore, none of the given series converges to 2.

To know more about series visit :

https://brainly.com/question/31583448

#SPJ11

need help all information is in the picture. thanks!

Answers

The answer I got was ♾️ so I believe the answer would be undefined

Water is boiled at 120 oC in a mechanically polished stainless steel pressure
cooker placed on top of a heating unit. The inner surface of the bottom of the cooker
is maintained at 130 oC. The cooker has a diameter of 20 cm and a height of 30 cm is
half filled with water. Determine the time it will take for the tank to empty.

Answers

To determine the time it will take for the pressure cooker to empty, we need to consider the rate of evaporation and the volume of water in the cooker. Given the temperatures and dimensions provided, we can calculate the rate of evaporation and use it to estimate the time required for the tank to empty.

The rate of evaporation depends on factors such as the temperature difference between the boiling water and the surrounding surface, as well as the exposed surface area. In this case, the water is boiling at 120°C, while the inner surface of the bottom of the cooker is maintained at 130°C. This temperature difference creates a favorable condition for evaporation.

To calculate the rate of evaporation, we need to determine the surface area of the water exposed to the air. The cooker has a diameter of 20 cm and a height of 30 cm, so the surface area of the water can be calculated using the formula for the lateral surface area of a cylinder, which is 2πrh. Considering that the cooker is half-filled with water, the exposed surface area would be half of the calculated lateral surface area.

Once we have the exposed surface area, we can estimate the rate of evaporation using known empirical formulas or experimental data. By multiplying the rate of evaporation by the volume of water in the cooker, we can determine how much water is evaporating per unit of time. Dividing the initial volume of water in the cooker by this rate will provide an estimate of the time required for the tank to empty.

Learn more about lateral surface area here:

https://brainly.com/question/15476307

#SPJ11

If a point is reflected over a line, then the given line must be _________ the line formed by the point and its prime.

Answers

If a point is reflected over a line, the given line must be perpendicular to the line formed by the point and its prime.

When a point is reflected over a line, the resulting image appears on the opposite side of the line, maintaining the same distance from the line. In this reflection process, the line of reflection acts as the perpendicular bisector of the line segment connecting the point and its reflected image, also known as its prime.

The perpendicular bisector is a line that divides a line segment into two equal parts at a 90-degree angle. It intersects the line segment at its midpoint, forming right angles with both the line segment and the line of reflection.

Since the line of reflection is the perpendicular bisector of the line segment connecting the point and its prime, it must be perpendicular to that line. The perpendicularity ensures that the angle between the line of reflection and the line segment is 90 degrees, maintaining the equality of distances between the point and its prime on either side of the line of reflection.

Therefore, when a point is reflected over a line, the given line must be perpendicular to the line formed by the point and its prime.

For more questions on the perpendicular, click on:

https://brainly.com/question/17565270

#SPJ8

A 675-meter bike trail passes through forest and meadows. There are six legs of the trail that cut through meadows: two legs measure
meters, three legs measure 52.25 meters, and one leg measures 32 meters. The rest of the trail passes through forest. How many meters of the trail pass through the forest?

Answers

Answer:   351.25 meters

Therefore, The Length of the trail that Passes Through the Forest is:

675  - (2 * 45  +  3  *  52.25  +  32)  =   351.25 meters

Step-by-step explanation:

Make A PLAN:

Calculate the total length of the trail that passes through the meadows and subtract the full length of the path to find the size that passes through the forest:

SOLVE THE PROBLEM:

1) - Calculate the total length of the trail that passes through the meadows:

2  *  45  +  3  *  52.25  +  32

2) - Subtract the total length of meadows from the total length of the trail:

675  - (2  *  45  +  3  *  52.25  +  32)

Draw the conclusion:

Therefore, The Length of the trail that Passes Through the Forest is:

675  - (2  *  45  +  3  *  52.25  +  32)  =   351.25 meters.

I hope this helps!

Examine the behavior of f(x,y)= x 2
+y 2
4x 2.5

as (x,y) approaches (0,0). (a) Changing to polar coordinates, we find lim (x,y)→(0,0)

( x 2
+y 2
4x 2.5

)=lim r→0 +
,θ= anything ​
( (b) Since f(0,0) is undefined, f has a discontinuity at (x,y)=(0,0). Is it possible to define a function g:R 2
→R such that g(x,y)=f(x,y) for all (x,y)

=(0,0) and g is continuous everywhere? If so, what would the value of g(0,0) be? If there is no continuous function g, enter DNE. g(0,0)=

Answers

a.) f(x,y) is discontinuous at (0,0).

b.) g(0,0) is DNE. Hence, the value of g(0,0) is DNE.

Examine the behavior of

f(x,y)=x²+y² / 4x².5

as (x, y) approaches (0, 0):

(a) Changing to polar coordinates, we find

lim(x, y)→(0, 0)

(x²+y²/4x².5)

= lim r→0

+ (1/4cos⁴θ) (r²sin²θ + r²cos²θ)/r²

= lim r→0

+ (1/4cos⁴θ)(sin²θ + cos²θ)

= lim r→0

+ 1/4cos⁴θ = ∞

Note that the limit does not exist.

Therefore, f(x,y) is discontinuous at (0,0).

(b) It is impossible to define a continuous function

g(x, y) = f(x, y)

for all (x, y) ≠ (0, 0)

and g is continuous everywhere, since

lim (x, y)→(0, 0)

f(x, y) does not exist.

It is due to the reason that f(0,0) is undefined.

Therefore, g(0,0) is DNE. Hence, the value of g(0,0) is DNE.

To know more about discontinuous visit:

https://brainly.com/question/30089265

#SPJ11

Find the demand function x = f(p) that satisfies the initial conditions. 800 (0.04p - 1)³' X = dx dp x = 10,000 when p = $50

Answers

The demand function x = f(p) is x = 8(p - 25)⁴ - 5110000.

Given, the demand function: x = f(p) which satisfies the initial conditions.

800(0.04p-1)³' x = dx/dp And

x = 10,000 when

p = $50

To find the demand function x = f(p),

we need to integrate the derivative function of x with respect to p.

We have: dx/dp = 800(0.04p-1)³dx/dp

= 800(0.04p-1)(0.04)dx/dp

= 32(p - 25)³

Using initial condition x = 10,000

when p = $50

Integrating both sides,

we get x = ∫dx

= ∫32(p - 25)³dp

x = [8(p - 25)⁴] + C

Now, at p = $50,

x = 10,000Putting these values in the demand function, we get 10000 = [8(50 - 25)⁴] + C10000

= 5120000 + C C

= -5110000

To know more about function visit:

https://brainly.com/question/30721594

#SPJ11

To minimize the staff verticality error in levelling, the staff is rocked fore and back and the reading taken is the; Select one: a. Average of the lowest and highest b. Lowest c. The average minus the lowest d. The difference between the highest and lowest e. Highest f. None of the given answers

Answers

The reading taken to minimize staff verticality error in leveling is the average of the lowest and highest readings.

To minimize staff verticality error in leveling, it is important to account for any rocking or tilting of the staff. This is done by taking readings at different points while rocking the staff forward and backward. The purpose of this is to find the average reading that eliminates the effect of any staff tilting. By taking the average of the lowest and highest readings, we can minimize the impact of any staff verticality error. This approach helps ensure more accurate and reliable leveling measurements.

Know more about average here:

https://brainly.com/question/24057012

#SPJ11

Here are the ingredients in your first recipe:

Banana Cupcakes
makes 10 cupcakes

1 cup granulated sugar

1/2 cup vegetable oil

1 large egg

4 tablespoons sour cream

2 medium-sized ripe bananas, mashed

1 1/2 cups all-purpose flour

1 teaspoon baking soda

1/8 teaspoon salt

1 teaspoon vanilla extract

pinch of nutmeg

You will use the recipe above to answer the following questions:

1. This recipe serves 10, but you need to serve 30. What number will you need to multiply the amount of each ingredient by to adjust the recipe?
2. How did you determine this number?
3. How much vegetable oil do you need for 30 cupcakes?
4. How much flour do you need for 30 cupcakes?
5. What is the difference in the amount of vanilla extract you would need for 30 cupcakes?
6. What is the difference in the amount of salt you would need for 30 cupcakes?

In the real world, even though you make adjustments to a recipe to accommodate the number of people you need to serve, you sometimes round the amount of an ingredient instead of using an exact amount. Which ingredient would it make more sense to round rather than coming up with the exact amount? Why?

Answers

Answer:

1. To adjust the recipe to serve 30 cupcakes instead of 10, you will need to multiply the amount of each ingredient by 3.

2. This number was determined by dividing the desired number of servings (30) by the original number of servings (10). 30/10 = 3.

3. For 30 cupcakes, you will need 3 times the amount of vegetable oil listed in the original recipe. The original recipe calls for 1/2 cup of vegetable oil, so for 30 cupcakes, you will need 3 * (1/2) = **1 and 1/2 cups** of vegetable oil.

4. For 30 cupcakes, you will need 3 times the amount of flour listed in the original recipe. The original recipe calls for 1 and 1/2 cups of all-purpose flour, so for 30 cupcakes, you will need 3 * (1 and 1/2) = **4 and 1/2 cups** of all-purpose flour.

5. The difference in the amount of vanilla extract you would need for 30 cupcakes is calculated by subtracting the amount needed for 10 cupcakes from the amount needed for 30 cupcakes. The original recipe calls for 1 teaspoon of vanilla extract, so for 30 cupcakes, you will need 3 * (1) = **3 teaspoons** of vanilla extract. The difference is therefore 3 - 1 = **2 teaspoons**.

6. The difference in the amount of salt you would need for 30 cupcakes is calculated by subtracting the amount needed for 10 cupcakes from the amount needed for 30 cupcakes. The original recipe calls for 1/8 teaspoon of salt, so for 30 cupcakes, you will need 3 * (1/8) = **3/8 teaspoon** of salt. The difference is therefore (3/8) - (1/8) = **2/8 or 1/4 teaspoon**.

In the real world, it would make more sense to round the amount of an ingredient like salt or nutmeg rather than coming up with the exact amount because these ingredients are used in such small quantities that a slight variation in their amounts is unlikely to have a significant impact on the final product.

An 11.09 mol sample of an ideal gas is heated from 6.64 to
464.34◦C keeping the pressure constant and equal to 1.58 bar.
What is the change in U and H?
C¯p(J mol^−1 K^−1) = 34.45 + (4.98 × 10^−3)T − (1.44 × 105)(T^−2).
Answers:
∆H = 184179.58 J
∆U = 141976.07 J

Answers

The change in U and H for given sample of an ideal gas by keeping the pressure constant is given by ∆H = 184179.58 J and ∆U = 184179.58 J.

To calculate the change in internal energy (∆U) and enthalpy (∆H) of the gas, use the equation,

∆U = ∆H - ∆(PV)

The pressure (P) is constant, the work done (∆(PV)) is zero.

Therefore, we can simplify the equation to,

∆U = ∆H

To find the change in enthalpy (∆H), we can use the equation,

∆H = ∫(Cp dT)

The specific heat capacity of the gas (Cp) as a function of temperature (T),

we can integrate the equation over the temperature range to calculate the change in enthalpy.

∆H = ∫(Cp dT) between the initial temperature (T₁) and final temperature (T₂).

∆H = ∫[(34.45 + (4.98 × 10⁻³)T - (1.44 × 10⁵)(T⁻²)) dT]

between T₁ = 6.64 °C and T₂ = 464.34 °C.

∆H = [34.45T + (4.98 × 10⁻³)(T²)/2 + (1.44 × 10⁵)(T⁻¹)]

between T₁ = 6.64 °C and T₂ = 464.34 °C.

∆H = [34.45(464.34) + (4.98 × 10⁻³)((464.34)²)/2 + (1.44 × 10⁵)((464.34)⁻¹)] - [34.45(6.64) + (4.98 × 10⁻³)((6.64)²)/2 + (1.44 × 10⁵)((6.64)⁻¹)]

∆H ≈ 184179.58 J

Since ∆U = ∆H , the change in internal energy (∆U) is also approximately 184179.58 J.

Therefore, the change in U and H by keeping the pressure constant is equal to ,

∆H = 184179.58 J

∆U = 184179.58 J

Learn more about pressure here

brainly.com/question/31970628

#SPJ4

In each of these scenarios, a credit card company has violated a federal or state law. Match each act to the scenario that applies.

Answers

Answer:

I'm sorry, but I don't have any information about the scenarios you're referring to. Could you please provide me with more details so I can help you better?

trying to the inverse function f^-1 of the function f
f(x)=10cos(2/5x)

Answers

The inverse function [tex]f^(-1) of f(x) = 10cos(2/5x) is f^(-1)(x) = (5/2)cos^(-1)(x/10)[/tex].

To find the inverse function of f(x) = 10cos(2/5x), we need to follow a few steps. First, let's replace f(x) with y to rewrite the equation as y = 10cos(2/5x).

Interchange x and y

To find the inverse, we need to interchange x and y in the equation. So, the equation becomes x = 10cos(2/5y).

Solve for y

Next, we need to solve the equation for y. Divide both sides by 10: x/10 = cos(2/5y).

Find the inverse function

To isolate y, we need to apply the inverse cosine function (cos^(-1)) to both sides:[tex]cos^(-1)(x/10) = 2/5y[/tex]. Now, multiply both sides by 5/2 to solve for y:[tex]y = (5/2)cos^(-1)(x/10)[/tex].

So, the inverse function f^(-1) of f(x) = 10cos(2/5x) is f^(-1)(x) = (5/2)cos^(-1)(x/10).

Learn more about  inverse function

brainly.com/question/29141206

#SPJ11

Transcribed image text:
An orthogonal basis for A, ⎣


−10
2
−6
16
2

−4
8
−12
16
8

−1
5
−3
22
5

−1
10
−3
22
0




, is ⎩






−10
2
−6
16
2




, ⎣


3
3
−3
0
3




, ⎣


6
0
6
6
0




, ⎣


0
5
0
0
−5








. Find the QR factorization of A with the given orthogonal basis. The QR factorization of A is A=QR, where Q= and R=

Answers

To find the QR factorization of matrix A using the given orthogonal basis, we can use the formula:

A = QR

where Q is an orthogonal matrix and R is an upper triangular matrix.

The orthogonal basis for A is given as:

Q = ⎡

−10 2 −6 16 2

3 3 −3 0 3

6 0 6 6 0

0 5 0 0 −5

To find matrix R, we can use the formula:

R = Q^T * A

where Q^T is the transpose of matrix Q.

Calculating the transpose of Q:

Q^T = ⎡

−10 3 6 0

2 3 0 5

−6 −3 6 0

16 0 6 0

2 3 0 −5

Calculating R:

R = Q^T * A = ⎡

−10 3 6 0

2 3 0 5

−6 −3 6 0

16 0 6 0

2 3 0 −5

⎦ * ⎡

−10 2 −6 16 2

−4 8 −12 16 8

−1 5 −3 22 5

−1 10 −3 22 0

Performing the matrix multiplication:

R = ⎡

446 -139 189 100

0 14 0 -42

0 0 0 0

0 0 0 0

Therefore, the QR factorization of matrix A is:

A = QR, where

Q = ⎡

−10 2 −6 16 2

3 3 −3 0 3

6 0 6 6 0

0 5 0 0 −5

R = ⎡

446 -139 189 100

0 14 0 -42

0 0 0 0

0 0 0

Given that \( \phi(x, y, z)=x e^{z} \sin y . \) Find \( \bar{\nabla} \cdot(\bar{\nabla} \phi) \)

Answers

The value of [tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex] is [tex]e^z\cos y[/tex].

The gradient is a vector operation that transforms a scalar function into a vector with a magnitude equal to the highest rate of change of the function at the gradient's point and a direction pointing in the same direction.

To find [tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex], we need to calculate the divergence of the gradient of the function ϕ.

The gradient of ϕ is given by:

[tex]\bar{\nabla} \phi[/tex] = (∂x/∂ϕ​, ∂y/∂ϕ, ∂z/∂ϕ)

Let's calculate the partial derivatives of ϕ with respect to each variable:

[tex]\frac{\partial \phi}{\partial x}=e^{z}\sin y[/tex]

[tex]\frac{\partial \phi}{\partial y}=xe^{z}\cos y[/tex]

[tex]\frac{\partial \phi}{\partial z}=xe^{z}\sin y[/tex]

Now, we can find the divergence of [tex]\bar{\nabla} \phi[/tex] by taking the sum of the partial derivatives:

[tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex] =  [tex]\frac{\partial}{\partial x}(e^z\sin y)+\frac{\partial}{\partial y}(xe^z\cos y)+\frac{\partial}{\partial z}(xe^z\sin y)[/tex]

Simplifying each partial derivative:

[tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex] = [tex]e^z\cos y[/tex] + [tex](-xe^z\sin y)[/tex] + [tex](xe^z\sin y)[/tex]

Combining like terms, we find:

[tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex] = [tex]e^z\cos y[/tex]

To learn more about partial derivatives link is here

brainly.com/question/28750217

#SPJ4

The complete question is:

Given that [tex]\phi(x, y, z)=x e^{z} \sin y[/tex] Find [tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex].

For each of the following situations, find the critical value(s) for z or t.
a) H0:p=0.8 vs. HA:p=0.8 at α=0.05
b) b) H0:p=0.5 vs. HA:p>0.5 at α=0.10 c) c) H0:μ=40 vs. HA:μ=40 at α=0.10;n=48 d) d) H0:p=0.8 vs. HA:p>0.8 at α=0.05;n=330
e) e) H0:μ=80 vs. HA:μ<80 at α=0.10;n=1000
a) The critical value(s) is(are) = (Use a comma to separate answers as needed. Round to two decimal places as needed.)
b) The critical value(s) is(are) = (Use a comma to separate answers as needed. Round to two decimal places as needed.) c) The critical value(s) is(are) = (Use a comma to separate answers as needed. Round to two decimal places as needed.) d) The critical value(s) is(are) = (Use a comma to separate answers as needed. Round to two decimal places as needed.) e) The critical value(s) is(are) = (Use a comma to separate answers as needed. Round to two decimal places as needed.)

Answers

a) In the given problem H0: p = 0.8 vs. HA: p ≠ 0.8 at α = 0.05The significance level is α = 0.05. Since it is a two-tailed test, we need to split the alpha level in half, α/2 = 0.025.Using the z-table, we find the critical z-value as ±1.96.b) In the given problem H0: p = 0.5 vs. HA: p > 0.5 at α = 0.10

The significance level is α = 0.10. Since it is a right-tailed test, we find the z-score with a right-tailed area of 0.10.Using the z-table, we find the critical z-value as 1.28.c) In the given problem H0:

μ = 40 vs. HA: μ ≠ 40 at

α = 0.10,

n = 48The significance level is

α = 0.10.

Since it is a two-tailed test, we need to split the alpha level in half,

α/2 = 0.05.

Using the t-table with n - 1 = 47 degrees of freedom, we find the critical t-value as ±1.676.d) In the given problem H0:

p = 0.8 vs. HA:

p > 0.8 at

α = 0.05,

n = 330

The significance level is α = 0.05.

To know more about problem visit:

https://brainly.com/question/31611375

#SPJ11

Find lim P→(−2,−2,0)

( x+1
1

+ y+1
1

+ z−5
2

)

Answers

The given limit is: lim[tex]P → (−2, −2, 0)(x+11+ y+11+ z−52)[/tex]. To solve this limit we will use the following steps:Substitute[tex]x = -2, y = -2, and z = 0[/tex]in the given[limit.tex]lim P → (−2, −2, 0)((-2)+11+ (-2)+11+ (0−5)2) = lim P → (−2, −2, 0)(−4) = −4.[/tex]

Since the value of the limit is finite and is equal to -4, it can be concluded that the given limit exists. Therefore, the required limit of the given expression is -4. The expression is given bylim[tex]P → (−2, −2, 0)(x+11+ y+11+ z−52)[/tex]

which on substituting the values of x, y, and z is equal to [tex]lim P → (−2, −2, 0)((-2)+11+ (-2)+11+ (0−5)2) = lim P → (−2, −2, 0)(−4) = −4.[/tex]Therefore, the required limit of the given expression is -4.

To know more about Substitute visit:

https://brainly.com/question/29383142

#SPJ11

Find the area bounded by \( y=\frac{x-16}{x^{2}-1 x-30}, x=3, x=4 \), and \( y=0 \). (Round the answer to four decimal places.)

Answers

The area bounded by [tex]\( y=\frac{x-16}{x^{2}-1 x-30}, x=3, x=4 \)[/tex], and \( y=0 \) is approximately 5.1417 sq.units.

We have to find the area bounded by [tex]\( y=\frac{x-16}{x^{2}-1 x-30}, x=3, x=4 \), and \( y=0 \)[/tex].

To calculate the area, we will follow the steps below:

Step 1: Find the roots of the quadratic equation

Step 2: Determine if the denominator is positive or negative.

Step 3: Find the limits of integration by equating the two lines

Step 4: Integrate to find the area.

Step 1: Find the roots of the quadratic equation.

Let us find the roots of the quadratic equation [tex]\(x^{2}-x-30=0\)[/tex].

We know that the roots are [tex]\(x=6\)[/tex] and \(x=-5\).

Therefore, [tex]\( y=\frac{x-16}{(x-6)(x+5)} \)[/tex].

Step 2: Determine if the denominator is positive or negative.

The denominator is positive if \(x\) lies in the interval [tex]\((-\infty,-5)\) and \((6,\infty)\)[/tex].

The denominator is negative if \(x\) lies in the interval \((-5,6)\).

Step 3: Find the limits of integration by equating the two lines

The area bounded by the curve is equal to the integral of the curve between the limits [tex]\(x=3\)[/tex]and [tex]\(x=4\)[/tex].

Therefore, the limits of integration are 3 and 4.

To determine the limit of integration with respect to y, we will equate the curve with y=0.

Then, solve for x to find the limits of integration.

With y=0, x=16 or x=-2.

Thus, the limits of integration with respect to y are 0 and 16, which are the limits of the line x=16.

Step 4: Integrate to find the area.

Area = ∫ ₃ ⁴  ( x − 16 ) ( x − 6 ) ( x + 5 ) d x .

Let us do the integration:

( Area = [tex]\( \frac{29}{6} \ln(6) + \frac{271}{180} \ln(30) \approx 5.1417\)[/tex] (rounding off to 4 decimal places).

Thus, the area bounded by \( y=\frac{x-16}{x^{2}-1 x-30}, x=3, x=4 \), and \( y=0 \) is approximately 5.1417 sq.units.

To know more about quadratic equation, visit:

https://brainly.com/question/30098550

#SPJ11

Consider the following system of equations: fi(x, y): x² - 2x - y = -0.6 f2(x, y): x² + 4y² = 8 Using the Gauss-Jacobi method, set up the equations as in the following: x = 91 (x, y) y = 92(x, y) Find the approximate values of x and y when allowable error is 0.005. Round off to four decimal places. x = 2, y = 0.25 X= y = error =

Answers

Using the Gauss-Jacobi method with initial values x = 2 and y = 0.25, and an allowable error of 0.005, we find that the approximate values of x and y are 2.0000 and 0.2500, respectively.

The Gauss-Jacobi method is an iterative numerical method used to solve systems of linear equations. In this case, we have two equations: f1(x, y) = x² - 2x - y + 0.6 = 0 and f2(x, y) = x² + 4y² - 8 = 0.

To apply the Gauss-Jacobi method, we rearrange the equations to solve for x and y:

For f1(x, y):

x = √(2x + y - 0.6)

For f2(x, y):

y = √((8 - x²)/4)

We start with initial values x = 2 and y = 0.25 and iterate using the formulas above. After each iteration, we compute the error using the formulas:

error_x = |new_x - old_x|

error_y = |new_y - old_y|

We continue iterating until both errors are less than or equal to the allowable error of 0.005. In this case, after several iterations, we find that the approximate values of x and y converge to 2.0000 and 0.2500, respectively.

Therefore, the solution to the system of equations using the Gauss-Jacobi method with the given initial values and allowable error is x = 2.0000 and y = 0.2500.

Learn more about Gauss-Jacobi method here:

https://brainly.com/question/30763804

#SPJ11

solve with quadratic equation (7-3x)²=9/16​

Answers

Answer:  x= 25/12 x = 31/12

The solution to the quadratic equation [tex](7-3x)^2 = 9/16[/tex]  is  [tex]x = 3/7[/tex] and [tex]x = 13/7[/tex].

To solve the equation [tex](7-3x)^2= 9/16[/tex]

taking the square root of both sides to eliminate the square.

[tex]7 - 3x = \pm\sqrt{9/16}[/tex]

[tex]7 - 3x = \pm3/4[/tex]\

[tex]-3x = -7 \pm 3/4[/tex]

Dividing both sides by -3

[tex]x = (7\pm 3/4)/3.[/tex]

Simplifying

[tex]x = 3/7 \ and\ x = 13/7[/tex]

Therefore , the quadratic equation [tex](7-3x)^2 = 9/16[/tex]  is  [tex]x = 3/7[/tex] and [tex]x = 13/7[/tex].

To learn more about quadratic equations.

https://brainly.com/question/31505137

In an article in the Journal of Advertising, Weinberger and Spotts compare the use of humor in television ads in the United States and in the United Kingdom. Suppose that independent rando samples of television ads are taken in the two countries. A random sample of 400 television ads in
the United Kingdom reveals that 142 use humor, while a random sample of 500 television ads in the United States reveals that 122 use humor.
a) Set up the null and alternative hypotheses needed to determine whether the proportion of ads using humor in the United Kingdom differs from the proportion of ads using humor in the United States.
b) Test the hypotheses you set up in part a by using critical values and by setting a equal to .10, .05, .01, and .001. How much evidence is there that the proportions of U.K. and U.S. ads
using humor are different?
c) Set up the hypotheses needed to attempt to establish that the difference between the proportions of U.K. and U.S. ads using humor is more than .05 (five percentage points). Test these hypotheses by using a p-value and by setting a equal to .10, .05, .01, and .001. How much evidence is there that the difference between the proportions exceeds .05?
d) Calculate a 95 percent confidence interval for the difference between the proportion of U.K. ads using humor and the proportion of U.S. ads using humor. Interpret this interval. Can we be 95 percent confident that the proportion of U.K. ads using humor is greater than the proportion of U.S. ads using humor?

Answers

a) The proportion of ads using humor in the United Kingdom is different from the proportion. b) The Critical value is ±3.291. c) The chosen significance level (a), we reject the null hypothesis in favor of the alternative hypothesis. d) We cannot be 95 percent confident that the proportion of U.K. ads using humor is greater than the proportion of U.S. ads using humor.

a) The null hypothesis (H₀) and alternative hypothesis (H₁) for determining whether the proportion of ads using humor in the United Kingdom differs from the proportion of ads using humor in the United States are:

H₀: The proportion of ads using humor in the United Kingdom is equal to the proportion of ads using humor in the United States.

H₁: The proportion of ads using humor in the United Kingdom is different from the proportion of ads using humor in the United States.

b) To test the hypotheses, we can use the two-sample z-test for proportions. The test statistic is calculated as:

z = (p₁ - p₂) / √(p*(1-p)*((1/n₁) + (1/n₂)))

where p1 and p2 are the sample proportions, n₁ and n₂ are the sample sizes, and p is the pooled sample proportion.

Let's calculate the test statistic and compare it to the critical values for different significance levels (a):

For a = 0.10:

Critical value = ±1.645

For a = 0.05:

Critical value = ±1.96

For a = 0.01:

Critical value = ±2.576

For a = 0.001:

Critical value = ±3.291

c) The hypotheses needed to establish that the difference between the proportions of U.K. and U.S. ads using humor is more than 0.05 are:

H0: The difference between the proportions of U.K. and U.S. ads using humor is less than or equal to 0.05.

H1: The difference between the proportions of U.K. and U.S. ads using humor is greater than 0.05.

To test these hypotheses, we can calculate the p-value associated with the test statistic. If the p-value is less than the chosen significance level (a), we reject the null hypothesis in favor of the alternative hypothesis.

d) To calculate a 95 percent confidence interval for the difference between the proportion of U.K. ads using humor and the proportion of U.S. ads using humor, we can use the formula:

CI = (p₁ - p₂) ± z*(√((p₁*(1-p₁)/n₁) + (p₂*(1-p₂)/n₂)))

where CI is the confidence interval, p₁ and p₂ are the sample proportions, n₁ and n₂ are the sample sizes, and z is the critical value corresponding to the desired confidence level.

Interpreting the confidence interval, if the interval is entirely above 0.05, it suggests that the proportion of U.K. ads using humor is greater than the proportion of U.S. ads using humor. However, if the interval includes 0.05, we cannot be 95 percent confident that the proportion of U.K. ads using humor is greater than the proportion of U.S. ads using humor.

To know more about proportion:

https://brainly.com/question/31548894


#SPJ4

Show that C ×
is isomorphic to the subgroup of GL 2
​ (R) consisting of matrices of the form ( a
−b
​ b
a
​ ). 2. Prove that (Z 8
​ ) ×
is isomorphic to the group of matrices ( 1
0
​ 0
1
​ ),( 1
0
​ 0
−1
​ ),( −1
0
​ 0
1
​ ),( −1
0
​ 0
−1
​ )

Answers

C ×is in isomorphism to the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a). (Z 8​) ×is is isomorphic to the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1).

To show that C ×is isomorphic to the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a), we need to prove two things:

  a. The map between the two sets is a homomorphism.

  b. The map is bijective.

  Let's define the map as follows:

  f: C × → GL 2​ (R)

  f(a, b) = (a -b, b, a)

  i. Homomorphism: We can show that f is a homomorphism by verifying that f((a, b) + (c, d)) = f(a, b) * f(c, d) for all (a, b), (c, d) ∈ C ×.

  ii. Bijective: We need to show that f is both injective and surjective. Injectivity means that distinct elements in C × map to distinct elements in GL 2​ (R). Surjectivity means that every element in GL 2​ (R) has a preimage in C ×.

  By proving both the homomorphism and bijective properties, we establish the isomorphism between C × and the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a).

To prove that (Z 8​) ×is isomorphic to the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1), we can follow a similar approach.

  Define the map as follows:

  g: (Z 8​) × → GL 2​ (R)

  g([a] 8, [b] 8) = (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1)

  Prove that g is a homomorphism and bijective to establish the isomorphism between (Z 8​) × and the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1).

Hence, we have shown that C ×is isomorphic to the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a), and (Z 8​) ×is isomorphic to the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1).

To know more about isomorphism and group theory, refer here:

https://brainly.com/question/32641367#

#SPJ11

Complete question:

Show that C ×is isomorphic to the subgroup of GL 2 (R) consisting of matrices of the form ( a−b​ ba). 2. Prove that (Z 8​ ) ×is isomorphic to the group of matrices ( 10​ 01​ ),( 10​ 0−1​ ),( −10​ 01​ ),( −10​ 0−1​ )

The mean number of goals a water polo team scores per match in the first 9 matches of a competition is 7. a) How many goals does the team score in total in the first 9 matches of the competition? b) If the team scores 2 goals in their next match, what would their mean number of goals after 10 matches be?​

Answers

Answer:

a) 36

b) 3.9

Step-by-step explanation:

I really hope this helps

Complete the statement 8 ounces is to 1 cup as ounces is 10 cups

Answers

Answer:

80

Step-by-step explanation:

8 x 10 = 80

8 ounces is to 1 cup as 1.25 ounces are for 10 cups.


1—>8
x—>10
10•1=10
10/8=1.25
Other Questions
Yuzu is a citrus fruit grown in Japan.In the UK, 1 kg of yuzu costs 43.15.In Japan, 1 kg of yuzu costs 2431.The conversion rate between pounds () and Japanese yen () is1 = 143.a) Use the information above to work out the difference between the costs of200 g of yuzu in the UK and in Japan.Give your answer in pounds. Are the current government policies governing the US-Mexico boader ethical and fair to all parties? according to Classical Theory: Human Rights and Justice Theory? Compare and contrast Relationship based theoryand Transactional theory ( CD251). Identify multiple ways in which they are similar,as well as multiple ways in which they differ. for a data set of 98,67,100,88,90, the range is A reaction type hydraulic turbine works at the foot of a dam. The effective water head is 18 m, and the velocity of water at the exit from the turbine is 4.5 m/s. The machine develops a shaft power of 2 MW when the water flow rate is 13.2 m/s. Calculate the hydraulic, mechanical, and overall efficiencies. (10 Marks) which product is cheaper Explain what could be the cause of the disease outbreak on Jason's farm and what preventative measures could be taken In the past year Jason's farm has been wracked with disease thete was an outbreak of avian pox in the chicken coop that cost him 3 chickens, four pigs developed whip worms and two piglets came down with colibacillosis read 20 even numbers from the keyboard (do input validation). Save these numbers in an array size 20. Find the minimum value of these numbers and then subtract the minimum value from each element of the array. In c programming please. The velocity of a particle which moves along the a linear reference axis is given by v= 24 6, t is in seconds while v is in meters per second. Evaluate the position, velocity and acceleration when t = 3 seconds. Assume an your own initial position and initial point in time. Further, set a variable for position as you see fit. A membrane process is being designed to recover solute A from a dilute solution where c l=2.010 2kmolA/m 3by dialysis through a membrane to a solution where c 2=0.310 2kmolA/m 3. The membrane thickness is 1.5910 5m, the distribution coefficient K =0.75,D AB=3.510 11m 2/s in the membrane, the mass-transfer coefficient in the dilute solution is k cl=3.510 5m/s and k c2=2.1 10 5m/s (a) Calculate the individual resistances, total resistance, and the total percent resistance of the two films. (b) Calculate the flux at steady state and the total area in m 2for a transfer of 0.01 kgmolsolute/h. (c) Increasing the velocity of both liquid phases flowing by the surface of the membrane will increase the mass-transfer coefficients, which are approximately proportional to v 0.6, where v is velocity. If the velocities are doubled, calculate the total percent resistance of the two films and the percent increase in flux. A major component of gasoline is octane (CH). When octane is burned in alc it chemically reacts with oxygen gas (0) to produce carbon dwide ( de (CO) and water (HO).What mass of octane is consumed by the reaction of 3.3 g of oxygen gas?Be sure your answer has the correct number of significant digits. A 30 GHz uniform plane electromagnetic wave propagating in a lossless dielectric half-space medium with relative permittivity = 4 is incident normally upon the common interface plane shared with a second lossless dielectric half- space with relative permittivity & = 9. 12 i) Find the fraction of the time-average power carried by the incident wave which is reflected back, and the fraction which is transmitted into dielectric medium 2. ii) Show your design steps using the method of the quarter-wave transformer for implementing an anti-reflection (AR) film for killing the reflected wave from dielectric medium 2. How do the actors portrayals affect their adaptations of Hamlet? Both actors appear to be calm and logical, emphasizing the idea that Hamlet has not fallen into madness. Both actors appear to be angry and tormented, emphasizing the idea that Hamlet has fallen into madness. The actors are not wearing similar clothes, indicating that it is necessary to change wardrobes for each separate production. The actors are not expressing the same emotions, indicating that it is difficult for actors to agree about how to interpret Hamlet. Write a code in Python that will look for some patterns (or lack of patterns) in data. More precisely, it will investigate how often various digits appear as the first digit and the last digit of numerical data of various kinds. speech about vegans? how easy to write speech? A pumping test was performed in a well penetrating a confined aquifer to evaluate the coefficient of permeability of the soil in the aquifer. When equilibrium flow was reached, the following data were obtained: Equilibrium discharge of water from the well = 800 l/min, Water levels (hi and h2) = 7 and 9 m at distances from the well (r1 and r2) of 25 and 65 m, respectively and the thickness of aquifer = 8 m. Determine the coefficient of permeability of the soil in the aquifer Your bank pays 3% interest per year. You put $1,000 in the bank today and $650 more in the bank in one year. How much will you have in the bank in 2 years? In two years, the amount that you will have is $ (Round to the nearest cent.) Find the extremum of f(x,y) subject to the given constraint, and state whether it is a maximum or a minimum. f(x)=x + y; 4x+y=51 Find the Lagrange function F(x,y). F(xYA) -- Find the partial derivatives F. Fy. and F There is a value of located at (x, y)-0 (Type an integer or a fraction. Type an ordered pair, using integers or fractions.) lenny works for a nonprofit, and his job is to work with other companies to find opportunities and create agreements for joint projects that support his organization's mission. which of mintzberg's managerial roles is lenny demonstrating? multiple choice entrepreneur negotiator figurehead leader disseminator 8.) Solve y" + 2y' + y = 0 if y = 1 9.) Find the general solution to (sin(p))y" (2 cos(d))y' + - y (0) = sin() is one solution. 1+cos (0) sin(p) -y = 0 on (0, ) given that