Answer:
Almost all the galaxies were at the time moving away from us . All the elements that we see around us . Cosmic microwave background radiation . The formation of galaxies and the large scale structure of the cosmos .
Explanation:
Answer the amount of miles of O2
Answer:
3
Explanation:
the answer is 3 because it is 3 for the o2 so 3 you have to pay more attention for the small ditails
Distinguish between single and double replacement reactions and give an example of
each.
Answer:
i think this is right!
Explanation:
An example of a single replacement reaction occurs when potassium (K) reacts with water (H2O). A colorless solid compound named potassium hydroxide (KOH) forms, and hydrogen gas (H2) is set free. The equation for the reaction is: 2K + 2H2O → 2KOH + H.
An example of a double replacement reaction is the reaction between silver nitrate and sodium chloride in water. Both silver nitrate and sodium chloride are ionic compounds. Both reactants dissolve into their ions in aqueous solution.
Does gravity give objects their mass
Answer:
No
Explanation:
Mass affects the amount of gravity that acts on an object.
Answer:
Mass is determined by the quantity of matter in a physical object.
Mass is how much space something takes up, while weight is how much an object is acted on by a force because of gravity.
Explanation:
Gravity does not determine the mass of an object. For example, an object on the Moon would weigh less than it does on Earth because of the lower gravity, but it would still have the same mass. This is because weight is a force, while mass is the property that determines the strength of this force.
Predict the sign of delta H for a combustion reaction and suggest whether it is likely to be spontaneous or not.
A) + and spontaneous
B) + and uncertain
C) - and spontaneous
D) - and uncertain
What's a combustion
It means hydrocarbon burns in presence of excess oxygen to produce carbon dioxide and heat
Hence it's exothermic∆H=+veAs solid state is converted to gaseous so randomness increases hence it's spontaneous
Combustion is the process of combining with oxygen to form water and carbon dioxide. It is an exothermic reaction and will release energy. Thus delta H for combustion is negative.
What is enthalpy change ?Enthalpy change of reaction is the change in heat absorbed or released by a reaction. If heat is absorbed by the system , the reaction is called endothermic and the change in enthalpy delta H is positive.
For a reaction which release energy, the change in enthalpy delta H will be negative and thus the reaction is said to be exothermic. Combustion is an exothermic reaction.
During combustion new bonds are formed between carbon and oxygen and carbon and hydrogen. Thus bond making is happend more than bond breaking. Bond breaking needs much energy than bond making.
Hence, the released energy is more form combustion and enthalpy change is negative. The process needs no more energy thus the reaction is spontaneous. Thus option C is correct.
To find more about enthalpy change, refer the link below:
https://brainly.com/question/4526346
#SPJ2
Need help! Will give brainliest & 50 points.
What happens to iron when it reacts with acid?
Answer:
Iron will disolve in acid. The acid eats away at the iron. :)
Have an amazing day!!
Please rate and mark brainliest!!
HeLP PLeAsE~ HelP pLeASe~ 500 pOInTs~
Bromthymol blue is an acid-base indicator that changes color around pH 7. Adding a small amount of bromthymol blue to a basic solution would be most helpful in _____.
A. determining the identity of the base in the solution
B. tracking the pH as the solution is gradually acidified
C. precisely measuring the pH of the solution
D. calculating the concentration of the base in the solution
Answer:
B) tracking the pH as the solution is gradually acidified
Explanation:
Got it right on the quiz!
hope this helped!
brainliest please!
Answer:
B. tracking the pH as the solution is gradually acidified
How can you get a real gas to behave like the LEAST like an ideal gas (minimize attraction between particles)?
A real gas behaves least like an ideal gas under the conditions of low temperature and high pressure.
This is because at low temperature and high pressure molecules of gas will have negligible kinetic energy and strong force of attraction. Thus, real gas will not behave like an ideal gas.
Whereas at high temperature and low pressure a real gas will behave like an ideal gas.
Answer: No real gas is ideal. All molecules have a volume and intermolecular forces of attraction. So a "real molar volume" is different from an ideal molar volume.
Explanation: I hope this help
Can someone help me explain three features that make Lake Baikal one of the most unique lakes in the world.
Explanation:
1,it's crystal clear water and unique wild life.
2,It is home to many unique species animals and plants.
3, It's sediment have not been scoured by overriding continental ice sheet
An impure sample of potassium hydrogen phthalate was titrated to determine the percent composition KHP. What is the percentage of potassium hydrogen phthalate if 2.81 g of the mixture required 35.61 mL of 0.152 mol/L NaOH to reach the end point
For an impure sample of potassium hydrogen phthalate, the percentage of potassium hydrogen phthalate is
m'=39.3%
What is the percentage of potassium hydrogen phthalate if 2.81 g of the mixture required 35.61 mL of 0.152 mol/L NaOH to reach the end point?Generally, the equation for the mol base is mathematically given as
mol base = M*V
mol base = 0.152*35.61
mol base = 5.41272 mmol
In conclusion
mass = mmol/1000*MW
m== 5.41272 /1000*204.22
m= 1.1053 g of KHP
Hence, m'=39.3%
Read more about Chemical reaction
https://brainly.com/question/16416932
A small sample of methane burns, producing co2 and water vapor. as the hot gas mixture expands, it releases 120.0 kj of heat and does 830.0 kj of work pushing against a piston. what is the total amount of energy released in this reaction
A small sample of methane burns, releasing 120.0 kJ of heat and doing 830.0 kJ of work. The total energy released is -950.0 kJ.
What is energy?Energy is a property that is transferred to a physical system, recognizable in the performance of work and in the form of heat and light.
A small sample of methane undergoes combustion. As the hot gas mixture expands, it releases energy (E).
It releases 120.0 kJ of heat. By convention, when heat is released, we assign it a negative sign. Thus, q = -120.0 kJ.It does 830.0 kJ of work. By convention, when the system does work on the surroundings, we assign it a negative sign. Thus, w = -830.0 kJ.The change in the energy is the sum of the heat released and the work done.
ΔE = q + w = -120.0 kJ + (-830.0 kJ) = -950.0 kJ
A small sample of methane burns, releasing 120.0 kJ of heat and doing 830.0 kJ of work. The total energy released is -950.0 kJ.
Learn more about energy here: https://brainly.com/question/13881533
What volume of water is used to prepare a 3.5 M solution if 45 grams of Na2CO3 is used?
Answer:
121.3 ml
Explanation:
Mole wts
Na 22.989 x 2
C 12.011
O 15.999 x 3 total = 105.986
45 grams is 45/105.986 of a mole
45/105.986 in one liter would be .424584 M
.424585 mole / x liter = 3.5
x = .1213 liter = 121.3 ml
Determine whether Z is a “poison”. Explain your reasoning.
The substance Z will be a poison if it produces adverse effects on th body even in small quantities.
What is a poison?A poison is a substance which when ingested into the body of an organism causes harm or injury to that organism.
Poisons can be in gaseous, solid or liquid form.
Poisons may be natural or synthetic in nature.
The characteristics of poison include:
The produce adverse effects in the body they are toxic even in small amountsTherefore, the substance Z will be a poison if it produces adverse effects on th body even in small quantities.
Learn more about poisons at: https://brainly.com/question/24442473
A gas is formed in the reaction shown below. The gas laws can help determine the volume of gas produced.
Zn(s) + 2 HCl(aq) → ZnCl₂ + H₂(g)
Assume that 130.8 grams of Zn was used in this reaction. To determine the number of moles of hydrogen gas formed, you need to know the number of moles of Zn reactant was used. What quantity in moles of Zn were used?
Considering the definition of molar mass, the number of moles of Zn reactant used is 2 moles.
Definition of molar massThe molar mass of substance is a property defined as its mass per unit quantity of substance, in other words, molar mass is the amount of mass that a substance contains in one mole.
Number of moles of Zn usedThe balanced reaction is:
Zn(s) + 2 HCl(aq) → ZnCl₂ + H₂(g)
Assume that 130.8 grams of Zn was used in this reaction.
To determine the number of moles of hydrogen gas formed, you need to know the number of moles of Zn reactant was used.
So to determine the number of moles used you know that the molar mass of Zn is 65.37[tex]\frac{g}{moles}[/tex]. Then:
[tex]molar mass=\frac{mass}{number of moles}[/tex]
[tex]65.37\frac{g}{moles} =\frac{130.8 g}{number of moles}[/tex]
Solving:
number of moles× 65.37[tex]\frac{g}{moles}[/tex]= 130.8 g
[tex]number of moles=\frac{130.8 g}{65.37\frac{g}{moles}}[/tex]
number of moles≅ 2 moles
Finally, the number of moles of Zn reactant used is 2 moles.
Learn more about molar mass:
brainly.com/question/5216907
brainly.com/question/11209783
brainly.com/question/7132033
brainly.com/question/17249726
Contrast (Compare) the Sun's gravitational pull on Earth when Earth is
closest to the Sun and when Earth is farthest from the sun.
Answer:
gravity equation.
Explanation:
use this gravity equation
F= G(m1*m2/d²)
please help
If the colored spheres represent different solute particles, based on the principles of osmosis, in which overall direction is water (not pictured) most likely to move?
A.
Water will move into the cell.
B.
Water will not move into or out of the cell.
C.
Water will move into and out of the cell equally.
D.
Water will move out of the cell.
If the colored spheres are solutes, the overall direction of water would be out of the cell based on the principle of osmosis.
What is osmosisIt is the movement of water molecules from the region of high water potential (low solutes) to the region of low water potential (high solute) through a selectively permeable membrane.
In the illustration, there are more colored spheres outside of the cell than inside of it. This means that there are more solutes outside the cell (lower water potential) than inside of the cell (higher water potential).
Thus, water will move from the inside of the cell to the outside until an equilibrium is established.
More on osmosis can be found here: https://brainly.com/question/1799974
4. One mole of H2O has a mass of 18g. How many moles of H,0 are there in 54g of
H2O?
Answer: 3 moles
Explanation: Divide 54 by 18 to get 3.
Which of the following is a reasonable explanation for the effect that stirring or agitation has on the dissolution rate?
A.
The water molecules have more kinetic energy and have a greater chance of interacting with (and dissolving) the potassium iodide.
B.
The water molecules have an increased charge, since stirring removes electrons from the molecules. This increases the chance of a potassium ion being attracted to water.
C.
Stirring converts large amounts of energy into heat from friction and the heat increases the dissolution rate.
D.
Stirring breaks the bonds between water molecules so that they are free to bond with the potassium and iodine ions.
The water molecules have more kinetic energy and have a greater chance of interacting with (and dissolving) the potassium iodide.
What is the effect of stirring on the dissolution rate?Stirring breaks a solute into smaller pieces which increases its surface area as well as its rate of dissolution. Stirring brings unused portions of the solvent in contact with the solute which allows the solute to dissolve faster.
So we can conclude that option A is the right answer.
Learn more about dissolution here: https://brainly.com/question/4529762
A person sitting in a rolling chair at rest throws a basketball forward. Since the person and the rolling chair have a greater mass than the basketball, how will the person and the rolling chair respond?
They will have the same forward momentum as the basketball.
They will move backward at a lower speed than the basketball moves forward.
They will move backward at a higher speed than the basketball moves forward.
They will travel the same distance as the basketball travels but in the opposite direction
They will move backward at a lower speed than the basketball moves forward.
Conservation of linear momentumThe principle of conservation of linear momentum states that the sum of the initial momentum is equal to sum of final momentum.
Initial momentum = Final momentum
The forward momentum of the basketball = Backward momentum of the person and the chair
Since the mass of the person and the chair is greater than the mass of the basketball, the person and the rolling chair will move backward at a lower speed than the basketball moves forward.
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
help I would really appreciate it tyy!!
Answer:
This image attached should help:
Explanation:
The reason that food web contains all organisms is because it shows every relationship, where food chain shows a more basic one. And the reason that they both have producers, consumers, and decomposers, is because they bothat least highlight a part of the almost every aspect, although it leans more to food web.
here's the answer to the question in the image, I couldn't comment on the right question because a bot already did.
1. ant, love
active
2. dog, man
dormant
3. bug, ring
burning
4. dress, up
pressure
5. think, tiger
trinker
What are the forms of energy that are transfer from the abiotic factors to the biotic factors and back to the abiotic factors of an ecosystem
Answer:
sunlight, light energy from the sun
Explanation:
energy is transferred from the sun to plants then animal's eat plants
At what age did Lavoisier die?
Answer:
50 years old
Explanation:
Antoine Lavoisier died by the guillotine at the age of 50 on May 8, 1794 in Paris.
Hope this helps...
- profparis
Answer:
Antoine Lavoisier died at the age of 50
Calculate: Describe the RGB value and color you would obtain with each combination described below. Use the Gizmo to check your answers.
RGB value Color
Yellow (255, 255, 0) and blue (0, 0, 255) ______________ ______________
Plum (120, 0, 120) and dark green (0, 120, 0) ______________ ______________
Teal (0, 90, 90) and bronze (185, 150, 0) ______________ ______________
In the RGB color model, each color is represented by a numerical code that is written in parentheses and separated by commas.
What is the RGB model?RGB is a color model with which it is possible to represent a color by mixing by adding the three primary colors of light.
A special feature of this model is that it is not a reference point for defining the color red, green, or blue because the same RGB values can display noticeably different colors on different devices.
To form a color, it must be taken into account that in the RGB model the incidence of each color (red, green or blue) is measured on a scale that goes from 0 to 255.
These values are represented in parentheses, separated by commas as shown in the image below:
Learn more about RGB in: https://brainly.com/question/19262252
what is ozen. gas? How is it formed?
[tex]\sf\huge\underline\purple{Ozone\: Gas:-}[/tex]
Ozone, O3, an unstable, blue, diamagnetic gas with a characteristic pungent odor, protects the earth and its inhabitants from intense ultraviolet radiation from the sun.[tex]\rightarrow[/tex]Ozone is an allotropic molecular form of oxygen containing three atoms of oxygen (O3). Ozone O3 is generated through the passage of oxygen O2 through a high voltage potential resulting in the attachment and formation of a third oxygen atom.
[tex]\rightarrow[/tex]The molecular formula for ozone (O3) was established by Soret (1863) by taking the ratio of the change in volumes when O3/O2 mixtures were either heated or exposed to turpentine and cinnamon oil.
Formation:-[tex]\rightarrow[/tex]Ozone is formed when heat and sunlight cause chemical reactions between oxides of nitrogen (NOX ) and Volatile Organic Compounds (VOC), which are also known as Hydrocarbons. This reaction can occur both near the ground and high in the atmosphere.
__________________________________
Hope it helps you:)
what mass of CO2 gas occupies 6.7L at 2 atm and 245k
At constant temperature, a sample of helium at 760. Torr in a closed container was compressed from 5. 00 l to 3. 00 l. What was the new pressure exerted by the helium on its container?.
P₁V₁=P₂V₂
760.5=P₂.3
P₂=1266.6 torr
This type of intermolecular force relates to the
big difference in the electronegativities. It exists
when N, O or F atom attracts with hydrogen
atom. Medium strength of attraction is
exhibited
The type of intermolecular force relates to the big difference in the electronegativities and is known as hydrogen bonding.
What are intermolecular forces?Intermolecular forces may be defined as the mechanism that mediates the interaction between the atoms of the molecules. It significantly includes the electromagnetic forces of attraction and repulsion between the atoms.
Some examples of intermolecular forces include London-dispersion force, dipole-dipole interaction, van der Waals interaction, hydrogen bonds, etc. Each one of them possesses a different set of characteristic properties distinctly. Some types of forces are also present in the body of living organisms.
Hydrogen bonding is a characteristic kind of interaction that remarkably includes dipole-dipole attraction between the most electronegative elements like Nitrogen, Oxygen, fluorine, etc., and the hydrogen atom.
Therefore, hydrogen bonding is a type of intermolecular force relates to the big difference in the electronegativities.
To learn more about Intermolecular forces, refer to the link:
https://brainly.com/question/13588164
#SPJ2
Is Iron rusting a physical, or chemical change?
Answer:
the answer is chemical change because the act of rusting changes the substance of iron
Explanation:
How many grams are in 4.80 mol of sodium chloride ( NaCl )?
[tex]w = \text{Number of mols} \times \text{Molar mass}=4.8 \times 58.5=280.8~ g[/tex]
We know,
Molar Mass of Sodium= 23 and,
Molar Mass of Chlorine= 35.45
[tex] \therefore \text{Molar Mass of Sodium chloride= 58.44 }\text{g/mol}[/tex]
So, The Molar Mass in Grams=
[tex]58.44 \frac{\text{g}}{ \cancel\text {mol}} \times 4.80 \: \cancel\text{mol} \\ \\ \text{Mass of NaCl }= 280.51\: \text {gram}[/tex]
Hope This Helps!!Name and Describe two properties of water that’s important to life on earth
"The Univeral Solvent"
- Water is known to be the universal solvent because of its ability to dissolve more particles than any other liquid.
Cohesion- Cohesion is the property of water to attract other molecules. This helps in making solutions that are essential for most life to propagate.
#learnwithbrainly
what is the pH of 3.65 grams of HCl dissolved in 1250 mL distilled H2O
Considering the definition of pH, the pH of 3.65 grams of HCl dissolved in 1250 mL distilled H₂O is 1.0969.
Definition of pHpH is the Hydrogen Potential. It is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.
Mathematically, pH is calculated as the negative base 10 logarithm of the activity of hydrogen ions:
pH= - log [H⁺]
The numerical scale that measures the pH of substances includes the numbers from 0 to 14. The pH value 7 corresponds to neutral substances. Acidic substances are those with a pH lower than 7, while basic substances have a pH higher than 7.
Concentration of HClMolar concentration or molarity is a measure of the concentration of a solute in a solution and indicates the number of moles of solute that are dissolved in a given volume.
The molarity of a solution is calculated by dividing the moles of solute by the volume of the solution:
[tex]Molarity=\frac{number of moles}{volume}[/tex]
In this case, you know:
number of moles=[tex]3.65 grams x\frac{1 mole}{36.45 grams} =[/tex] 0.1 moles (being 36.45 g/mole the molar mass of HCl)volume= 1250 mL= 1.250 L (being 1000 mL= 1 L)Replacing in the definition of molarity:
[tex]Molarity=\frac{0.1 moles}{1.250 L}[/tex]
Solving:
Molarity= 0.08 [tex]\frac{moles}{liter}[/tex]= 0.08 M
pH of the solutionHydrochloric acid is a strong acid, so in aqueous solution it will be totally dissociated. So the concentration of protons is equal to the initial concentration of acid. This is: [H⁺]= [HCl]= 0.08 M
Replacing in the definition of pH:
pH= - log (0.08 M)
Solving:
pH= 1.0969
Finally, the pH of 3.65 grams of HCl dissolved in 1250 mL distilled H₂O is 1.0969.
Learn more about
pH:
brainly.com/question/3992824
https://brainly.com/question/12200689
molarity:
brainly.com/question/9324116
brainly.com/question/10608366
brainly.com/question/7429224
