what are the products obtained from petroleum? ​

Answers

Answer 1

Petroleum is a naturally occurring liquid mixture of hydrocarbons, which is usually referred to as crude oil. It is a non-renewable resource that is extracted from the ground by drilling wells.

Petroleum is a complex mixture of various components, and it is refined into different products for use in different industries. There are various products obtained from petroleum. These products include gasoline, diesel fuel, heating oil, jet fuel, kerosene, asphalt, lubricants, and petrochemicals. Each of these products has its own unique properties and uses.

1. Gasoline: Gasoline is the most commonly used petroleum product. It is a liquid fuel that is used in internal combustion engines in cars, trucks, and other vehicles. Gasoline is a mixture of various hydrocarbons that have been refined from crude oil.

2. Diesel Fuel : Diesel fuel is another liquid fuel that is obtained from petroleum. It is used in diesel engines in trucks, buses, and other heavy-duty vehicles. Diesel fuel is made up of hydrocarbons that are heavier than those in gasoline.

3. Heating Oil :Heating oil is a liquid fuel that is used to heat homes and buildings. It is similar to diesel fuel but is refined to have a higher boiling point.

4. Jet Fuel: Jet fuel is a type of kerosene that is used to power jet engines in airplanes. It is refined to have a low freezing point and a high energy content.

5. Kerosene: Kerosene is a liquid fuel that is used for lighting, heating, and cooking. It is similar to jet fuel but is refined to have a higher boiling point.

6. Lubricants: Lubricants are oils that are used to reduce friction between moving parts in engines and machinery. They are made from refined petroleum and can be used in a variety of applications.

7. Petrochemicals: Petrochemicals are chemicals that are derived from petroleum. They are used in a wide range of products, including plastics, synthetic fibers, rubber, and detergents.

Overall, petroleum is an important resource that is used to produce a wide range of products that we use in our daily lives. The products obtained from petroleum have a significant impact on the economy, transportation, and various industries.

Know more about Lubricants here:

https://brainly.com/question/20427687

#SPJ8


Related Questions

Can H2 be broken down? (Not H)

Answers

Hello, this is Bing. I can help you with your question. Based on the information I found on the web, **H2** can be broken down into its two atoms of hydrogen (H) by supplying enough energy to overcome the bond that holds them together⁴. This process is called **dissociation** and requires an energy equal to or greater than the **dissociation energy** of H2, which is about 436 kJ/mol⁴.

One way to break down H2 is by using **electricity** to split water (H2O) into hydrogen (H2) and oxygen (O2) through a process called **electrolysis**¹. In this process, water is decomposed into its elements by passing an electric current through it. The electric current is provided by a battery or another source of electricity and the water needs to have an **electrolyte**, such as salt or acid, added to it to make it conductive¹. Two electrodes, usually made of metal or other conductive material, are inserted into the water and connected to the battery. The electrode connected to the positive terminal of the battery is called the **anode** and the one connected to the negative terminal is called the **cathode**¹. When the electric current flows through the water, hydrogen gas bubbles form at the cathode and oxygen gas bubbles form at the anode¹. The overall chemical reaction for electrolysis of water is:

2 H2O → 2 H2 + O2

Another way to break down H2 is by using **heat** to cause a reaction between hydrogen and oxygen that produces water and releases a large amount of energy. This reaction is called **combustion** or **oxidation** and can be ignited by a spark or a flame³. The reaction is very fast and explosive and can be dangerous if not controlled. The overall chemical reaction for combustion of hydrogen is:

2 H2 + O2 → 2 H2O

I hope this helps you understand how H2 can be broken down and what methods are used to do so.

PLEASE HURRY
50 POINTS !!!!

Select the correct compound.
Reactants undergo chemical reaction to form products.
This chemical equation represents one such reaction.
The coefficient for one of the reactants or products is incorrect.
Which part of the chemical equation is incorrect?

2C₂H₁0+ 100₂

8CO₂+ 10H₂O

Answers

The chemical equation that represents one such reaction is:

2C2H10 + 13O2 --> 8CO2 + 10H2O.

The answer is "There is no part that is incorrect".

In the given chemical equation, all the coefficients are correct. Hence, the answer is "There is no part that is incorrect".A chemical equation is defined as the symbolic representation of a chemical reaction in the form of symbols and formulae, where reactants are written on the left side of the equation and products are written on the right side. It describes the identity and quantity of the reactants and products involved in the chemical reaction. The reactants undergo the chemical reaction to form products. The reactants are written on the left side of the equation, and the products are written on the right side. Each element's number of atoms is conserved in both the reactants and the products.

For such more questions on chemical equation

https://brainly.com/question/29886207

#SPJ8

Write the structure of essential fatty acid with three double bonds and give the name

Answers

Essential fatty acids play a crucial role in human health and should be included as part of a balanced diet. The structure of an essential fatty acid with three double bonds is an omega-3 fatty acid known as alpha-linolenic acid.

Essential fatty acids are the dietary fats that are required by the human body for healthy functioning.

The human body cannot produce essential fatty acids on its own, so they must be obtained from dietary sources.

They are important components of cell membranes and are necessary for the synthesis of important molecules such as eicosanoids, which regulate inflammation and blood clotting.

There are two types of essential fatty acids: omega-3 and omega-6. Both types are polyunsaturated fatty acids, meaning that they contain more than one double bond in their carbon chain. The structure of an essential fatty acid with three double bonds is as follows: CH3(CH2)5CH=CHCH2CH=CHCH2CH=CH(CH2)7COOH.

This is an omega-3 fatty acid known as alpha-linolenic acid.

It is important for brain function and has been linked to a reduced risk of heart disease. The name of this fatty acid is derived from its chemical structure.

The first part of the name, alpha, refers to the position of the double bond closest to the carboxyl group (COOH). The second part of the name, linolenic, indicates that there are three double bonds present in the carbon chain.

The final part of the name, acid, refers to the fact that it is an acid due to the presence of the carboxyl group.

For more such questions on fatty acids

https://brainly.com/question/876346

#SPJ8

does the molecule which have C2 axis perpendicular to the Cn axis have mirror plane perpendicular to the Cn axis ?

Answers

No, a molecule with a [tex]C_2[/tex]axis perpendicular to the [tex]C_n[/tex]axis does not necessarily have a mirror plane perpendicular to the [tex]C_n[/tex]axis.

The presence of a [tex]C_2[/tex]axis perpendicular to the [tex]C_n[/tex]axis implies that the molecule possesses rotational symmetry around the [tex]C_n[/tex]axis. However, the presence of a mirror plane is determined by the presence of an additional symmetry element in the molecule.

A mirror plane is a symmetry element that divides the molecule into two halves, with one half being the mirror image of the other. In order for a mirror plane to be present perpendicular to the [tex]C_n[/tex]axis, there needs to be an additional symmetry element that produces the reflection symmetry.

While a molecule with a [tex]C_2[/tex] axis perpendicular to the [tex]C_n[/tex]axis has rotational symmetry, it does not necessarily possess reflection symmetry. For example, consider a molecule with a [tex]C_2[/tex]axis perpendicular to a [tex]C_3[/tex]axis.

The rotational symmetry is evident, as the molecule can be rotated by 120 degrees around the [tex]C_3[/tex] axis and still appear the same. However, this molecule does not possess a mirror plane perpendicular to the [tex]C_3[/tex]axis.

The presence of a mirror plane perpendicular to the [tex]C_n[/tex]axis depends on the specific molecular geometry and arrangement of atoms. It is possible for a molecule to possess both rotational symmetry and a mirror plane perpendicular to the [tex]C_n[/tex]axis, but it is not a general rule.

For more such questions on perpendicular visit:

https://brainly.com/question/23828050]

#SPJ8

Chemistry questions about dilutions with stoichiometry

Answers

9. The molarity of nitrate ions in the new solution will be A, 0.575 M.

10. The molarity of aluminum ions in the new solution will be D, 0.479 M.

How to find molarity?

Question 9

To solve this, first calculate the number of moles of nitrate ions in each solution:

The number of moles of nitrate ions in Solution A is 30.0 g Al(NO₃)₃ / 225 mL × 1 mol Al(NO₃)₃ / 213 g Al(NO₃)₃ = 0.575 mol NO₃⁻

The number of moles of nitrate ions in Solution B is 30.0 g Al₂(SO₄)₃ / 325 mL × 3 mol NO₃⁻ / 2 mol Al₂(SO₄)₃ = 0.478 mol NO₃⁻

The total number of moles of nitrate ions in the new solution is 0.575 mol NO₃⁻ + 0.478 mol NO₃⁻ = 1.053 mol NO₃⁻

The total volume of the new solution is 225 mL + 325 mL = 550 mL

The molarity of nitrate ions in the new solution is 1.053 mol NO₃⁻ / 550 mL = 0.575 M

Question 10

To solve this, first calculate the number of moles of aluminum ions in each solution:

The number of moles of aluminum ions in Solution A is 30.0 g Al(NO₃)₃ / 225 mL × 1 mol Al(NO₃)₃ / 213 g Al(NO₃)₃ × 1 mol Al / 1 mol Al(NO₃)₃ = 0.222 mol Al

The number of moles of aluminum ions in Solution B is 30.0 g Al₂(SO₄)₃ / 325 mL × 2 mol Al / 2 mol Al₂(SO₄)₃ = 0.333 mol Al

The total number of moles of aluminum ions in the new solution is 0.222 mol Al + 0.333 mol Al = 0.555 mol Al

The total volume of the new solution is 550 mL

The molarity of aluminum ions in the new solution is 0.555 mol Al / 550 mL = 0.479 M

Find out more on molarity here: https://brainly.com/question/30404105

#SPJ1

Acrylonitrile, C3H₂N, is a molecule used to produce a plastic called Orlon. How many grams of acrylonitrile
could be produced by reacting 583 g of propene, C3H, with excess ammonia, NH, and oxygen?
2C3H6+ 2NH3 + 30₂ → 2C,H₂N + 6H₂O

a. 368 g
b. 1470 g
C. 462 g
d. 735 g
e. 583 g

Answers

d. 735 g of acrylonitrile could be produced by reacting 583 g of propene, [tex]C_{3}H[/tex], with excess ammonia, NH, and oxygen

To determine the grams of acrylonitrile that could be produced, we need to find the limiting reactant in the given chemical equation. The limiting reactant is the one that is completely consumed and determines the amount of product formed.

First, we need to calculate the molar masses of propene ([tex]C_{3}H_{6}[/tex]) and acrylonitrile ([tex]C_{3}H_{2}N[/tex]).

Molar mass of propene ([tex]C_{3}H_{6}[/tex]):

3(C) + 6(H) = 3(12.01 g/mol) + 6(1.01 g/mol) = 42.09 g/mol

Molar mass of acrylonitrile ([tex]C_{3}H_{2}N[/tex]):

3(C) + 2(H) + 1(N) = 3(12.01 g/mol) + 2(1.01 g/mol) + 1(14.01 g/mol) = 53.06 g/mol

Next, we calculate the number of moles of propene:

583 g / 42.09 g/mol = 13.86 mol

According to the balanced equation, the stoichiometric ratio between propene and acrylonitrile is 2:2. Therefore, for every 2 moles of propene, 2 moles of acrylonitrile are produced.

Since the stoichiometric ratio is 1:1, the number of moles of acrylonitrile produced is also 13.86 mol.

Finally, we calculate the mass of acrylonitrile:

Mass = moles × molar mass = 13.86 mol × 53.06 g/mol = 735 g

Therefore, Option D is correct.

Know more about Molar mass here:

https://brainly.com/question/24191825

#SPJ8

it is difficult to cut the steam of water

Answers

It is difficult to cut the steam of water because of the unique properties of water and steam.Water and steam are two different states of matter, but they have a common property - they are both molecules of H2O. Steam is formed when water is heated, and the molecules of H2O begin to move faster and further apart from one another.

This results in steam, which is a gas and not a liquid like water. It is more challenging to cut the steam of water than the liquid water due to its unique properties.Therefore, the difficulty of cutting steam of water is due to the following properties of steam:Low density: Steam has low density because of the increased space between the water molecules due to heating. This means that steam takes up more space and is lighter than water, making it difficult to cut or separate from the atmosphere.Gaseous state: Steam is a gaseous state, which means it does not have a definite shape or volume like liquid water. Therefore, cutting steam would be difficult as it does not have a defined structure. Moreover, steam would disperse instantly if it is cut due to its gaseous form and become difficult to capture.Very hot: Steam is at a temperature that is harmful to human skin, and can cause severe burns. This means that cutting steam is also a safety concern, which makes the process even more challenging.

For such more question on molecules

https://brainly.com/question/475709

#SPJ8

Explain one way you could set up a tug-of-war that was imbalanced.Explain one way you could set up a tug-of-war that was imbalanced.

Answers

Answer:

have 5 people on one side and 3 people on the other side

Explanation:

Give the symbol and name for the ion with 34 protons and 36 electrons.

Answers

Answer:

That element is selenium, Se

How many moles of gold are there in 28 grams of gold?

Answers

Answer: There are approximately 0.142 moles in 28 grams of Gold.

Explanation:

To calculate the number of moles 28 grams of Gold, we need to know the molar mass of gold. The molar mass of gold (Au) is approximately 197 grams per mole.

We can use the formula:

Number of moles = Mass (in grams)  / Molar mass

Substituting the given values:

Number of moles = 28 g / 197 g per mole

Number of moles ≈ 0.142 moles (approx.)

Therefore, there are approximately 0.142 moles of gold in 28 grams.

For more questions on Molar mass and moles, see :

https://brainly.in/question/11731

0.142 mol/dm^3 in 28 grams of gold

Describe the relationship between molecular structure and acid strength.

Answers

The relationship between molecular structure and acid strength is crucial in understanding the behavior and properties of acids. Acid strength is determined by the ability of an acid to donate protons (H+) in an aqueous solution. The molecular structure of an acid plays a significant role in determining its strength.

The key factor influencing acid strength is the stability of the resulting conjugate base after the acid donates a proton. The more stable the conjugate base, the stronger the acid. There are several factors that contribute to the stability of the conjugate base.

Firstly, electronegativity plays a role. Acids with more electronegative atoms, such as oxygen, tend to have stronger acidity because they can stabilize the negative charge on the conjugate base through resonance or inductive effects.

Secondly, the presence of electron-withdrawing groups enhances acid strength. These groups, like halogens or nitro groups, withdraw electron density from the acidic hydrogen, making it easier to dissociate and donate a proton.

Thirdly, molecular size also affects acid strength. Acids with larger molecules tend to have weaker acidity because the electron density is spread over a larger area, making it less likely for the acidic hydrogen to dissociate.

Overall, the molecular structure of an acid influences its acidity by determining the stability of the resulting conjugate base. Factors such as electronegativity, electron-withdrawing groups, and molecular size all contribute to the strength of an acid.

For more such questions on molecular structure

https://brainly.com/question/27789666

#SPJ8

what is the scope of humidity?

Answers

Humidity refers to the amount of moisture present in the air or atmosphere. It is a crucial atmospheric parameter that impacts various aspects of our environment and daily lives.

The scope of humidity extends across multiple domains, including meteorology, agriculture, health, and technology. In meteorology, humidity plays a vital role in determining weather patterns, cloud formation, and precipitation. In agriculture, it affects crop growth, irrigation requirements, and pest control. Humidity also influences human comfort and well-being, as high humidity can make temperatures feel hotter and exacerbate respiratory conditions. Moreover, industries such as manufacturing and electronics depend on humidity control to ensure product quality and prevent damage.Understanding and managing humidity levels are essential for optimizing numerous processes, improving human health, and maintaining the balance of ecosystems.

For such more question on Humidity

https://brainly.com/question/21494654

#SPJ8

What is the temperature at which the reaction below is at equilibrium?
2NO(g) + O2(g)  2NO2(g), ΔH° = -113 kJ/mol and ΔS° = -145 J/K mol

Answers

The temperature at which the system can be able to attain equilibrium is 779 K.

What is the entropy?

The concept of entropy is often associated with the second law of thermodynamics, which states that the entropy of an isolated system tends to increase over time. In simple terms, the second law suggests that natural processes tend to move from a state of order to a state of greater disorder.

We know the temperature can be obtained from the enthalpy and the entropy of the system. We have that;

ΔS= ΔH/T

T = ΔH/ΔS

T =  -113 [tex]* 10^3[/tex]J/mol / -145 J/K mol

= 779 K

Learn more about entropy:https://brainly.com/question/20166134

#SPJ1

PLEASE HELP ME :(

In a certain complex ion, the central ion or atom has 5d electrons and is complexed by a strong ligand. The coordination number of the central ion / atom is 6.
a. Draw an energy level diagram that represents the five d orbitals with their electrons.
b. Describe the ion in terms of whether it is high spin or low spin, number of unpaired electrons, and whether the central atom is diamagnetic or paramagnetism [and if "para", how much].

Answers

From the description in the question;

1) The image is shown in attachment

2) The energy levels are shown in the image attached.

3) The complex is diamagnetic

What is the complex?

For a strong ligand, the crystal field splitting energy is larger, and it results in a larger energy gap between the d orbitals. As a result, the electrons tend to be pairing up. We would have a low spin complex as a result of this.

Since we know that in  the low spin there would be the pairing up of the electrons as we gave envisaged in the paragraph that is before this, then it naturally follows that the complex would be diamagnetic.

Learn more about complexes:https://brainly.com/question/29377605

#SPJ1

What is the velocity of an electron that has a de Broglie wavelength approximately the length of a chemical bond? Assume the length of a chemical bond is 2.1×10−10 m . (The mass of an electron is 9.11×10−31kg .) Express the velocity to two significant figures and include the appropriate units.

Answers

The velocity of the electron with a de Broglie wavelength approximately equal to the length of a chemical bond is approximately 3.46 x 10^6 m/s.

The de Broglie wavelength (λ) of a particle is given by the equation:

λ = h / p

where λ is the wavelength, h is the Planck constant (6.626 x 10^-34 J*s), and p is the momentum of the particle. The momentum (p) of a particle is given by the equation:

p = m * v

where p is the momentum, m is the mass of the particle, and v is the velocity of the particle.

In this case, we have the de Broglie wavelength (λ) approximately equal to the length of a chemical bond, which is 2.1 x 10^-10 m. The mass of an electron (m) is 9.11 x 10^-31 kg.

Using the equation λ = h / p, we can rearrange it to solve for the momentum (p):

p = h / λ

Substituting the given values, we get:

p = (6.626 x 10^-34 Js) / (2.1 x 10^-10 m) ≈ 3.15 x 10^-24 kgm/s

Now, we can use the momentum (p) to calculate the velocity (v) using the equation p = m * v:

v = p / m

Substituting the values:

v = (3.15 x 10^-24 kg*m/s) / (9.11 x 10^-31 kg) ≈ 3.46 x 10^6 m/s

For more such question on de Broglie visit:

https://brainly.com/question/30216495

#SPJ8

What is the predominant form of ethylenediamine at pH 6.184 ?

H2NCH2CH2NH+3

H2NCH2CH2NH2

H+3NCH2CH2NH+3

Answers

The predominant form of ethylenediamine at pH 6.184 is H2NCH2CH2NH+3.

At pH 6.184, which is slightly acidic, the amino groups in ethylenediamine (H2NCH2CH2NH2) can partially protonate, resulting in the formation of ammonium ions (H+3NCH2CH2NH+3). The equilibrium between the neutral form and the protonated form is pH-dependent.

Therefore, at pH 6.184, the predominant form of ethylenediamine is H2NCH2CH2NH+3.

An Ibuprofen (MW = 206.29) solution was made by dissolving 4,421 milligrams into water with a
final volume of 0.172 L. What is the concentration of Ibuprofen in Molarity?

Answers

The concentration of Ibuprofen in the solution is approximately 0.124 M (Molarity), calculated by dividing the moles of Ibuprofen (0.0214 mol) by the volume of the solution (0.172 L).

To calculate the concentration of Ibuprofen in molarity, we need to use the formula:

Concentration (Molarity) = moles of solute / volume of solution in liters

First, we need to convert the mass of Ibuprofen into moles. The molar mass of Ibuprofen is given as 206.29 g/mol.

Step 1: Convert milligrams to grams:

4,421 mg = 4.421 g

Step 2: Convert grams to moles:

moles = mass / molar mass

moles = 4.421 g / 206.29 g/mol

moles ≈ 0.0214 mol

Step 3: Calculate the concentration:

Concentration = moles / volume

Concentration = 0.0214 mol / 0.172 L

Concentration ≈ 0.124 M

Therefore, the concentration of Ibuprofen in the solution is approximately 0.124 M (Molarity). This means that there are 0.124 moles of Ibuprofen dissolved in every liter of the solution.

Know more about Molarity here:

https://brainly.com/question/30404105

#SPJ8

78.54 of nitrogen dioxide contain how many molecules

Answers

To calculate the number of molecules in a given amount of a substance, we need to know the molar mass of the substance and use Avogadro's number.

Given:

Amount of nitrogen dioxide (NO2) = 78.54 g

To determine the number of molecules, we'll follow these steps:

Calculate the number of moles of nitrogen dioxide:

Number of moles = Mass / Molar mass

The molar mass of nitrogen dioxide (NO2) can be calculated as follows:

Molar mass of NO2 = (Molar mass of N) + 2 × (Molar mass of O)

The molar masses are:

Molar mass of N = 14.01 g/mol

Molar mass of O = 16.00 g/mol

Molar mass of NO2 = 14.01 g/mol + 2 × 16.00 g/mol = 46.01 g/mol

Plugging in the values, we have:

Number of moles = 78.54 g / 46.01 g/mol

Calculate the number of molecules:

Number of molecules = Number of moles × Avogadro's number

Avogadro's number = 6.022 × 10^23 molecules/mol

Plugging in the values, we have:

Number of molecules = Number of moles × Avogadro's number

Now, let's calculate:

Number of moles = 78.54 g / 46.01 g/mol ≈ 1.7078 mol

Number of molecules = 1.7078 mol × 6.022 × 10^23 molecules/mol

Number of molecules ≈ 1.028 × 10^24 molecules

Therefore, approximately 1.028 × 10^24 molecules are present in 78.54 grams of nitrogen dioxide (NO2).

Sodium chloride can be obtained from
underground deposits or from the…….
What is the missing word?

Answers

Answer:Common salt is sodium chloride, NaCl. It can be made in a laboratory by the reaction of sodium with chlorine. However, it is found naturally in large amounts in sea water or in underground deposits. It is often obtained either by evaporating sea water or by mining underground deposits.

Explanation:

why do nonmetals tend to gain electrons to form negative loss?
a. they gain the few electrons they need to form full octets
b. they have fewer protons in their nuclei, so they attract electrons
c. they gain electrons to balance the protons in their nuclei
d. they have low electronegativities

Answers

Nonmetals are found on the right side of the periodic table and they tend to gain electrons to achieve stable electronic configurations. These elements have high ionization energies and low electromagnetism which make it difficult for them to lose electrons and easier for them to gain electrons.

Most nonmetals have four, five, six, or seven valence electrons and they need to gain one, two, or three electrons to complete their outermost energy level and obtain a stable electronic configuration, often similar to that of a noble gas.For instance, Fluorine (F), Chlorine (Cl), and Oxygen (O) are nonmetals and they have seven, seven, and six valence electrons, respectively. They are very electromotive which means that they tend to attract electrons towards themselves. When they gain an electron, they form an anion with a negative charge that is isoelectronic to the nearest noble gas in the periodic table.In summary, nonmetals tend to gain electrons to form negative ions because they have high ionization energies and low electromagnetism. These properties make it difficult for them to lose electrons and easier for them to gain electrons. When they gain electrons, they form anions with negative charges that are isoelectronic to the nearest noble gas.

For such more question on electromagnetism

https://brainly.com/question/12555869

#SPJ8

A continous fractionating column separates 1500 kg/h of a solution of benzene and toluene containing 0.75 mass benzene into an overhead product containing 0.925 mass fraction benzene and bottom product containing 0.075 mass fraction of benzene. A reflux ration of 2.5 kg of reflux per kg of product is to be used. Calculate the quanity of top and bottom product in kg/h.

Answers

The quantity of the top product is approximately 1483.4 kg/h, and the quantity of the bottom product is approximately 1116.7 kg/h.

What is the quantity of top and bottom products in kg/h?

We solve using the concept of material balances.

Given:

F = Feed rate of the solution (benzene + toluene) = 1500 kg/h

Fb = Feed rate of benzene in the feed = 0.75 * F = 1125 kg/h

Ft = Feed rate of toluene in the feed = F - Fb = 375 kg/h

Benzene Balance:

Fb = Bt + Bb

where Bt is the flow rate of benzene in the top product and Bb is the flow rate of benzene in the bottom product.

1125 kg/h = Bt + Bb

Toluene Balance:

The mass balance equation for toluene can be written as:

Ft = Tt + Tb

where Tt is the flow rate of toluene in the top product and Tb is the flow rate of toluene in the bottom product.

375 kg/h = Tt + Tb

The reflux ratio is given as 2.5 kg reflux per kg of product

The total product flow rate (Pt) will be:

Pt = Bt + Tt = Bb + Tb

Therefore, the reflux flow rate (R) is:

R = 2.5 * Pt

Solving the equations, we find:

Bt = 1116.7 kg/h

Tb = 8.3 kg/h

Top Product Flow Rate = Bt + Tt = Bt + (Ft - Tb) = Bt + (375 - 8.3) = 1116.7 + 366.7 = 1483.4 kg/h

Bottom Product Flow Rate = Bb + Tb = 1125 - 8.3 = 1116.7 kg/h

Learn more about material balance at: https://brainly.com/question/30705511

#SPJ1

what is the density of a liquid with volume 1817.cm and mass of 1.14kg

Answers

Answer:[tex]d=\frac{1817 cm}{1.14kg} d= 1593.86 \frac{cm}{kg}[/tex]

Explanation:

[tex]d= \frac{v}{m}[/tex]

When this chemical equation is balanced, what is the coefficient of NeCI?
- NaCI +
_РЬ(N03)2 ->
_PbCI2 + NaNO3

Answers

By process of elimination, the coefficient of NaCl is 1, as it does not appear in the given chemical equation.

To balance the chemical equation:

NaCl + Pb(NO3)2 -> PbCl2 + NaNO3

We can start by balancing the atoms individually. We begin with the least complex atom, in this case, sodium (Na):

NaCl + Pb(NO3)2 -> PbCl2 + NaNO3

The equation already has one Na on the left side, so we place a coefficient of 1 in front of NaCl:

1NaCl + Pb(NO3)2 -> PbCl2 + NaNO3

Next, we move on to chlorine (Cl). On the left side, there is one Cl in NaCl, while on the right side, there are two Cl in PbCl2:

1NaCl + Pb(NO3)2 -> 1PbCl2 + NaNO3

We balance the nitrate ions (NO3). On the left side, there are two NO3 in Pb(NO3)2, while on the right side, there is only one NO3 in NaNO3:

1NaCl + Pb(NO3)2 -> 1PbCl2 + 2NaNO3

Finally, we balance the lead (Pb) atoms. There is one Pb on the right side in PbCl2, so we place a coefficient of 1 in front of Pb(NO3)2:

1NaCl + 1Pb(NO3)2 -> 1PbCl2 + 2NaNO3

For more such questions on elimination visit;

https://brainly.com/question/17101814

#SPJ8

An exothermic process will result in:

a. a reaction vessel that feels cold as heat is absorbed from the surroundings.

b. a reaction vessel that feels warm as heat passes to the surroundings

c. products with more energy content than reactants

d. a positive energy gain for the reaction (+q).

Answers

Answer:An exothermic process releases heat, causing the temperature of the immediate surroundings to rise.

Explanation:

81. Which of the following is NOT composed of protein? A. sex hormones C. Hair B. Muscle D. Enzymes​

Answers

Answer: A. sex hormones

Explanation:

Sex hormones are steroid compounds synthesized from cholesterol mainly in the testes, ovaries, and adrenal cortex.

Describe the energy in wind and the way in which its converted to electrical energy?

Answers

Answer:Wind rotates the rotor blades

Explanation:

Wind turbines use blades to collect the wind's kinetic energy. Wind flows over the blades creating lift (similar to the effect on airplane wings), which causes the blades to turn. The blades are connected to a drive shaft that turns an electric generator, which produces (generates) electricity.

Describe the weather conditions for a Stationary front.

Answers

A stationary front is a boundary between two air masses that are not moving relative to one another. When a cold front or warm front meets and can't push one another, they create a stationary front. The wind direction around a stationary front changes slightly in one or both directions, but not enough to create a cold front or warm front.

The weather conditions for a stationary front are a mixture of cold and warm fronts' characteristics. When a stationary front is formed, the warm and cold air masses are separated. The result is often a band of precipitation, cloudiness, and humid conditions. Stationary fronts cause lengthy periods of precipitation, including mist, fog, and drizzle, and they can cause flooding in some regions.They can also generate thunderstorms and other kinds of inclement weather, and the intensity of the rain or snow is typically determined by the temperature and humidity levels.The warm air mass' instability often results in thunderstorms, tornadoes, and heavy rain and hail in the area where it meets the cooler, more stable air mass. Precipitation occurs, but it is usually light and steady rather than heavy and thundery. In summary, stationary fronts create a mix of weather conditions, which can vary depending on the air masses involved and the specific geography of the location.

For such more question on inclement

https://brainly.com/question/31765968
#SPJ8

Identify the physical state(s) corresponding to the regions on the cooling curve below.

Answers

Based on the information, we can infer that the labels for each letter according to the physical state of matter would be: A. gas, B. liquid and gas, C. liquid, D. liquid, E. liquid and solid.

How to complete the chart?

To complete the table we must take into account the graph that shows the variation of temperature in an element. In this case we can infer that the descending curve refers to the decrease in temperature.

In this case we can infer that the element may be water because its boiling point is close to 100° and its freezing point is at 0°. According to the above, the letters in the box correspond to the following labels:

A. gas, B. liquid and gas, C. liquid, D. liquid, E. liquid and solid.

Learn more about states of matter in: https://brainly.com/question/29476563

#SPJ1

Read the paragraph below and choose the central idea from options given below.

Water
We use water every day. Water is an important factor in human life. Water can take
many forms. Generally, water is in liquid form. Frozen water is called ice. When ice
cubes are kept at room temperature, they turn into liquid again. If the pool of
melted water is not wiped up, it will disappear after some time. Do you know where
it goes? It becomes water vapor, or a gas, and disappears into the air. There is water
vapor in clouds. Water can be liquid, solid, or a gas.

Water is a liquid.
Water can take many forms.
Water can become ice.
Water can become vapor.

Answers

Answer:

ok, here is your answer

"Water can take many forms".

Mark me as brainliest

Question 8 of 10
What conditions make AG always negative?

Answers

The conditions that make ∆G (Gibbs free energy) always negative are when a reaction is spontaneous and thermodynamically favorable. This occurs when the system has a decrease in enthalpy (∆H) and an increase in entropy (∆S).

A negative ∆H indicates an exothermic reaction, where the products have lower energy than the reactants. An increase in entropy (∆S) means that the disorder or randomness of the system increases during the reaction.

When ∆H is negative and ∆S is positive, the equation ∆G = ∆H - T∆S (where T is the temperature in Kelvin) results in a negative ∆G. In this case, the reaction is spontaneous, meaning it can proceed without requiring an external input of energy.

Furthermore, when the reaction is carried out under standard conditions (standard temperature, pressure, and concentration), the resulting ∆G° (standard Gibbs free energy change) will always be negative for a spontaneous reaction.

In summary, negative ∆G is achieved when the reaction is exothermic, increases the disorder of the system, and occurs under standard conditions or conditions where ∆H is negative and ∆S is positive.

Know more about exothermic here:

https://brainly.com/question/2924714

#SPJ8

Other Questions
3. James says he paid $25,000 down on a new house and will pay $525 per month for 30 years. If interestis 7.8% compounded monthly, what was the selling price of the house? Twelve people are to be seated at a rectangular table for dinner. Tanya will sit at the head of the table. Henry must not sit beside either Wilson or Nancy. In how many ways can the people be seated f a. Type the equation in center-radius form. (Simplify your answer.) b. Type the equation in general form. (Simplify your answer.)-10 (4,6) (-8,2) (4-2) 10 10 10 e find f xx(x,y),f xy(x,y),f yx(x,y), and f yy(x,y) for each function f. f(x,y)= yx 2 xy 2 Given the following table of values, find h' (-1) if h(x) = (x4 + p(x))". 2 1 1 0 -1 -2 3 1 p(2) p(x) 2 3 -2 -4 Provide your answer below: W(-1)= Red Bulls promotional events promote the brand image of an adrenaline-fueled lifestyle. Which type of objective does this branding goal represent?aCorporate objectivebBusiness unit objectivecTactical missiondMarketing objectiveeCorporate mission Use the product code breakdown provided at the top of the worksheet as a guide to create appropriate nested functions to complete the following: If the product is White insert the product Quantity, otherwise the cell should be blank. Copy the function down to the other cells in the column. In cell D14 use the appropriate function to calculate the total from the results. A 700-gram salt and water solution contains 45 g of salt. This mixture is left in the open air and 100 g of water evaporates from the solution. What is the percent concentration of salt in the remaining solution? The manager of a seafood restaurant was asked to establish a pricing policy on lobster dinners. The manager intends to use the pricing S/LB to predict the lobster sales on each day. The pertinent historical data are collected as shown in the table. Anaswer the following questions Day 12 13 4 15 16 Lobster Sold/day Price (S/lb.) 191 6.3 189 177 164 171 169 157 6.2 6.9 7.7 7.2 7.1 7.8 a) x = independent variable. According to this problem, the Ex- b)r is the coeefficient of correlation. Use the requation to compute the value of the denominator part of the equation. The value for the r denominator = (in 4 decimal places) e) According to this problem, the correlation of coefficient, r, between the two most pertinent variables is places) (in 4 decimal d) According to the instructor's lecture, the correlation strength between any two variables can be described as strong, weak or no correlation The correlation strength for this problem can be described as correlation e) According to the instructor's lecture, the correlation direction between any two variables can be described as direct or indirect relationshup The correlation direction for this problem can be described as relationship 1) Regardless, you were told to use the Associative Forecasting method to predict the expected lobater sale. If the lobster price-$8.58, the expected of (round to the next whole ). lobster sold Problem 1Is the Sales variable normally distributed?- Use Sales document- Your analysis must include (see the example posted online)o Descriptive statistics (use Data Data Analysis Descriptive statistics)o Five-number summaryo Interquartile rangeo Number of observations within +/-1 and +/-2 standard deviations of the meano Range and 6 standard deviations comparisono Normal probability ploto Conclusions 1) Ethernet and Wi-Fi systems operate in the data link layer and they share many protocols from higher layer.A. TrueB. False2) Virtual Private Network (VPN) physically splits the network into subnetworks to improve the network bandwidth and to better utilize the IP space.A. TrueB. False Assume that the weights of quarters are normally distributed with a mean of 5.55 g and a standard deviation 0.049 g. A vending machine will only accept coins weighing between 5.43 g and 5.67 g. What percentage of legal quarters will be rejected? A.0.0142% B.1.57% C.1.42% D.0.0157% E.1.65% Analysis Question: Explain why the turn-off point on the H-R Diagram of a cluster tells you the age of that cluster. Include information about the life cycle of stars and properties of clusters. Enter your answer below On todays work I need help with my English Find the magnitude of vector \( \vec{u}=\langle 6,-4\rangle \). \[ \|\vec{u}\|= \] In 2005-06 the average cost of tuition and fees at private four-year colleges was reported at just over $21,000 per year (www.collegeboard.com, October 18th, 2005). More specifically, the population average cost of tuition and fees for private four-year colleges is $21,235 and the standard deviation is $33,952. Assume that a random sample of 35 private four-year colleges will be selected. (b) What is the standard deviation of the sampling distribution of the sample means? Lucy needs to buy some organic apples, and her grocery store is having a sale on them. If she buys 3 or fewer pounds of apples, the price will be $1.50 per pound. If she buys more than 3 pounds of apples, the price is $1.10 per pound. What is the domain of the piecewise-defined function, where x represents the number of pounds of apples?{x| x 0}{x| x is a real number}{x| 0 x 3}{x| x 3} When evaluating percentage daily values, what is considered "a lot" of macro and micro nutrients? 15% or more 20% or more 25% or more 10% or more What do GPS devices do? Rightway Co. has paid $20/share and purchased 200 shares of Treasury stock with $10/share par value. Three months later, half of this Treasury stock was reissued at $22/share. Journalize the purchase and the reissuance of Treasury stock as two separate transactions