Answer:
That its small pointed. Pink(Himalayan salt)or white(normal salt)
Explanation:
Summa dees questions are so stupid, deys makin me salty.
Each of the insoluble salts below are put into 0.10 M hydrobromic acid solution. Do you expect their solubility to be more, less, or about the same as in a pure water solution ?
a. Calcium sulfite
b. Calcium fluoride
c. Silver bromide
Answer:
A. Solubility of calcium sulfite increases
B. Solubility of calcium fluoride increases
C. Solubility of Silver bromide decreases
Explanation:
The solubility factor is proportional to ions' concentration. The solubility of a solution can be predicted from Le Chatelier's principle which states that if an external constraint is imposed on a system in equilibrium, the equilibrium position will shift in order to annul the effect of the external constraint. So, If the reactant's concentration increases, the equilibrium shifts to the right indicating a higher solubility of the solution and if the product's concentration increases, the equilibrium shifts to the left indicating a lesser solubility of the solution.
Case 1. Calcium sulfite
The dissociation reaction of CaSO3 is given below:
CaSO3 ----> Ca²+ + SO3²-
SO3²- is the conjugate base of the weak acid, H2SO3. Therefore, on the addition of hydrobromic acid, some of the sulfite ion is removed from the solution by the following reaction;
H+ + SO3²- ---> HSO3-
This shifts the equilibrium to the right, more dissociation, thereby resulting in more solubility of the solute.
Case 2. Calcium fluoride
The dissociation reaction of calcium fluoride (CaF2) is shown below.
CaF2 ----> Ca²+ + 2F-
Fluoride ion (F-) is a strong conjugate base of the weak acid. Therefore, some of fluoride ions is removed by the addition of hydrobromic acid as shown below:
H+ + F- ---->. HF
Hence, the concentration of fluoride ions reduces, shifting equilibrium in the forward direction. Therefore, the solubility will be more than in pure water solution.
Case 3: Silver bromide
The dissociation reaction of AgBr is as follows:
AgBr ----> Ag+ + Br-
The addition of HBr will increase the concentration of bromide ions. Hence, equilibrium will shift in backward direction resulting in a lesser solubility than in water.
The solubility of calcium sulfite and calcium fluoride is greater in 0.10 M hydrobromic acid solution than in pure water while the solubility of silver bromide is lesser in 0.10 M hydrobromic acid solution than in pure water.
Common ion effect refers to the decrease in solubility of a substance in a solution that contains another solute with which it has a common ion. If a substance is dissolved in a solution that contains a solute with which it has a common ion, the solubility of the substance in that solution is less than its solubility in pure water.
Considering the substances given, the solubility of calcium sulfite and calcium fluoride in 0.10 M hydrobromic acid solution is more than their solubility in pure water the equilibrium position is shifted in the forward direction.
However, solubility of silver bromide in 0.10 M hydrobromic acid solution is less than its solubility in pure water due to common ion effect.
Learn more: https://brainly.com/question/6505878
When you turn on the air conditioner during a hot summer day the cooler air will sink to the floor, while warmer air rises to the
ceiling
Which type of heat transfer is this an example of?
(A) conduction
(B) convection
(C) radiation
(D)
kinetic
symbol for carboxylic acid
what is the chemical symbol and name of the third element in the periodic table
Answer: Aluminum symbol Al or aluminum American English
Explanation:
Answer:
Hii
Li( Lithium)
Explanation:
Lithium has the atomic number of three and is the third element in periodic table.
Consider the following system at equilibrium: P(aq)+Q(aq)⇌3R(aq) Classify each of the following actions by whether it causes a leftward shift, a rightward shift, or no shift in the direction of the net reaction. Drag the appropriate items to their respective bins.
Items:1) Increase [P]2) Increase [Q]3) Increase [R]4) Decrease [P]5) Decrease [Q]6) Decrease [R]7) Triple [P] and reduce [Q] to one third8) Triple both [Q] and [R]
Explanation:
P(aq)+Q(aq)⇌3R(aq)
This problem involves applying LeChatelier's principle.
LeChatelier's principle states that whenever a system in equilibrium is disturbed, the equilibrium position would change in order to annul that change.
1) Increase [P]
This would cause the equilibrium position to shift to the right. This is because more reactions have been added, to annul that change more products have to be formed.
2) Increase [Q]
This would cause the equilibrium position to shift to the right. This is because more reactions have been added, to annul that change more products have to be formed.
3) Increase [R]
This would cause the equlibrium position to shift to the left. This is because more products have been formed, to annul that change more reactants have to be formed.
4) Decrease [P]
This would cause the equlibrium position to shift to the left. This is because there are now less reactants, to annul that change more reactants have to be formed.
5) Decrease [Q]
This would cause the equilibrium position to shift to the left. This is because there are now less reactants, to annul that change more reactants have to be formed.
6) Decrease [R]
This would cause the equilibrium position to shift to the right. This is because there are now less products, to annul that change more products have to be formed.
7) Triple [P] and reduce [Q] to one third
No shift in the direction of the net reaction because both changes cancels each other.
8) Triple both [Q] and [R]
No shift in the direction of the net reaction because both changes cancels each other.
Which table represents a relation that is not function?
Please
Answer:
1
Explanation:
Any relation with a repeated input value is not a function.
Table 1 has the input value 2 listed twice, so does not represent a function.
A 25.0 mLsample of an acetic acid solution is titrated with a 0.175 M NaOH solution. The equivalence point is reached when 37.5 mL of the base is added. The concentration of acetic acid in the sample was:_______,
A) 0.263
B) 0.365
C) 0.175
D) 1.83×10−4
E) 0.119
Answer:
0.263M of CH₃COOH is the concentration of the solution.
Explanation:
The reaction of acetic acid (CH₃COOH) with NaOH is:
CH₃COOH + NaOH → CH₃COO⁻Na⁺ + H₂O
1 mole of acetic acid reacts per mole of NaOH to produce sodium acetate and water.
In the equivalence point, moles of acetic acid are equal to moles of NaOH and moles of NaOH are:
0.0375L × (0.175 moles / L) = 6.56x10⁻³ moles of NaOH = moles of CH₃COOH.
As the sample of acetic acid had a volume of 25.0mL = 0.025L:
6.56x10⁻³ moles of CH₃COOH / 0.0250L =
0.263M of CH₃COOH is the concentration of the solution
What happens in a neutralization reaction?
a
The hydrogen (H+) ions from the base and the hydroxide (OH-) ions from the acld come together to form water.
The hydrogen (H+) ions from the acid and the hydroxide (OH) ions from the base come together to form water.
A substance's pH is increased to a value greater than 7.
A solution of a known concentration and volume is added until the reaction is completed.
Answer:
Answer is letter B
Explanation:
The first one is wrong because acids release H+, not bases.
The third one is wrong because the pH is exactly 7, not greater.
The last one is wrong because it is vague and does not fit a neutralization reaction.
Question 5 of 20:
Select the best answer for the question.
5. Which of the following is a homonuclear diatomic molecule?
O A. NH3
O B. 2002
O C. Hz
O D. CO
Answer:
Homo nuclear molecule mean having atoms of only one element,
I cant see clearly the option B and C can you correct them , 2002? Hz?
Explanation:
Answer:
H2
Explanation:
The aluminum in a package containing 75 ft2 of kitchen foil weighs approximately 12 ounces. Aluminum has a density of 2.70 g/cm3 . What is the approximate thickness of the aluminum foil in millimeters?(1 ounce = 28.4g)
Answer:
18130 mm
Explanation:
Now we have a lot of unit conversions to do in order to correctly answer this question. We shall do these conversions gradually.
First we convert the weight in ounce to grams.
If 1 ounce = 28.4g
12 ounces = 12×28.4 = 340.8 g
Next we convert the area of aluminum from ft2 to m2
1ft2= 0.0929 m2
75 ft2= 75 × 0.0929= 6.9675m2
Now density of aluminum= 2.70 gcm-3
Density= mass/volume
But volume= area× thickness
Density= mass/ area × thickness
Density × area × thickness= mass
Thickness= mass/ density × area
Thickness= 340.8g / 2.70gcm-3 × 6.9675m2
Thickness= 340.8/18.8
Thickness= 18.13 m
Since 1000 milimeters make 1 metre
Thickness= 18130 mm
In this problem, you will use Lenz's law to explore what happens when an electromagnet is activated a short distance from a wire loop.
You will need to use the right-hand rule to find the direction of the induced current. When the switch is open, which of the following statements about the magnetic flux through the wire loop is true? Assume that the direction of the vector area of the wire loop is to the right.
A) There is no magnetic flux through the wire loop.
B) There is a positive flux through the wire loop.
C) There is a negative flux through the wire loop.
Answer:
The correct answer is Option A (There is no magnetic flux through the wire loop.)
Explanation:
Magnetic flux measures the entire magnetic field that passes through the wire loop.
The right hand rule can be demonstrated on how magnetic flux is generated through the moving current in the wire loop. The magnetic flux through the wire loop will decrease as it moves upward through the magnetic field region.
If the direction of the vector area of the wire loop is to the right, and the switch is closed, it will push the magnetic flux to the right which will now be increased due to an equal increase in the current in the wire loop. But, when the switch is open, this will halt the movement of current through the wire loop thus affecting the generation of magnetic field. This would make the magnetic flux to be zero.
The statement related to the magnetic flux is option A i.e. no magnetic flux is there.
What is magnetic flux?It determined the overall magnetic field that should be passed via the looping of the wire. here the right-hand rule represent how the magnetic flux should be created via the movement of the current.
Also, it should be decreased in the case when it should be moved upward. Also, in the case when the direction of the vector area should be right so the switch should be closed.
Therefore, the option A is correct.
Learn more about magnetic here: https://brainly.com/question/18704022
Coefficient of balanced equation: __Fe + ___020) — _Fe_036)
Answer:
- Four for iron, three for oxygen and 2 for iron (III) oxide:
[tex]4Fe+3O_2\rightarrow 2Fe_2O_3[/tex]
Explanation:
Hello,
In this case, the oxidation of iron is a widely acknowledged reaction occurring in ships and other machines exposed to the air or highly oxidizing medias. Thus, by the effect of oxygen, iron undergoes oxidation typically to iron (III) oxide:
[tex]Fe+O_2\rightarrow Fe_2O_3[/tex]
Nonetheless, the law of conservation of mass must be respected, therefore the coefficients balancing the reaction are four for iron, three for oxygen and 2 for iron (III) oxide:
[tex]4Fe+3O_2\rightarrow 2Fe_2O_3[/tex]
Best regards.
Nitrogen forms more oxides than any other element. The percents by mass of in three different nitrogen oxides are (1) (II) and (III) 25.94 For each compound, determine (a) the simplest whole-number ratio of to and (b) the number of grams of oxygen per 1.00 of nitrogen.
Complete question;
Nitrogen forms more oxides than any other element. The percents by mass of N in three different nitrogen oxides are (|) 46.69%;(II) 36.85 %; (III) 25.94%. For each compound, determine (a) the simplest whole-number ratio of N to O, and (b) the number of grams of oxygen per 1.00 g of nitrogen.
Answer:
a. (i) The ratio is 1:1 , the formula = NO (ii)The ratio is 1 : 1.5 which is 2 : 3, the formula = N₂O₃ (iii) The ratio is 1 : 2.5 which is 2:5 , the formula = N₂O₅
b. (i)number of grams of oxygen = 53.31/46.69 = 1.14 g
(ii)number of grams of oxygen = 63.15/36.8 = 1.71 g
(iii)number of grams of oxygen = 74.06/25.94 = 2.855 g
Explanation:
a.
(i) The percentage by mass of the nitrogen in Nitrogen oxide (i) is 46.69% which is taken as 46.69 grams . Since the other element is oxygen the mass of oxygen will be 100 - 46.69 = 53.31 grams.
The relative atomic mass of Nitrogen and oxygen is 14 amu and 16 amu respectively.
Therefore, to know the whole number ratio of N and O we find the number of moles.
number of moles of N = 46.69/14 = 3.335
number of moles of O = 53.31/16 = 3.332
The ratio is 1:1 , the formula = NO
(ii)
number of moles of N = 36.85/14 = 2.632
number of moles of O = 63.15/16 = 3.947
The ratio is 1 : 1.5 which is 2 : 3, the formula = N₂O₃
(iii)
number of moles of N = 25.94/14 = 1.85
number of moles of O = 74.06/16 = 4.63
The ratio is 1 : 2.5 which is 2:5 , the formula = N₂O₅
b.
(i) 46.69 g of nitrogen = 53.31 g of oxygen
1 g of nitrogen = ? of Oxygen
number of grams of oxygen = 53.31/46.69 = 1.14 g
(ii)
Using similar method in b(i)
number of grams of oxygen = 63.15/36.8 = 1.71 g
(iii)
Using similar method in b(i)
number of grams of oxygen = 74.06/25.94 = 2.855 g
What is the balanced chemical equation for this reaction? H3PO4 + HCl → PCl5 + H2O Question 7 options: H3PO4 + 5HCl → PCl5 + H2O 2H3PO4 + 10HCl → 2PCl5 + 4H2O 2H3PO4 + 5HCl → 2PCl5 + 3H2O H3PO4 + 5HCl → PCl5 + 4H2O
Answer:
H3PO4 + 5HCl → PCl5 + 4H2O
Explanation:
In a chemical reaction, the number of atoms of each element must be the same on both sides of the equation. Notice that, originally, there's only one atom of chlorine on the left side and five atoms of chlorine on the right. The coefficient of 5 is added to the HCl compound to correct this. However, now there are eight atoms of hydrogen on the left and only two on the right. Adding the coefficient of 4 to the H2O compound balances the hydrogen and also balances oxygen on both sides at the same time.
The balanced chemical equation for the reaction:
H₃PO₄ + 5HCl → PCl₅ + 4H₂O (last option)
How to write balance equation?To write the balance equation for any given reaction, all we need to do is to ensure that the number of atoms in the reacting species and products formed are equal on both sides of the equation.
The balanced chemical equation for the reaction given in the question can be obtained as follow:
H₃PO₄ + HCl → PCl₅ + H₂O
There are 5 atoms of Cl on the right side and 1 atom on the left. It can be balanced by writing 5 before HCl as shown below:
H₃PO₄ + 5HCl → PCl₅ + H₂O
There are a total of 8 atoms of H on the left side and 2 atoms on the right. It can be balanced by writing 4 before H₂O as shown below:
H₃PO₄ + 5HCl → PCl₅ + 4H₂O
Now, we can see that the number of atoms in the reactants and products are equal.
Thus, the balanced equation for the reaction is
H₃PO₄ + 5HCl → PCl₅ + 4H₂O (last option)
Learn more about balancing equation:
https://brainly.com/question/12192253
#SPJ6
What is the balanced form of the chemical equation shown below?
Na2SO4(aq) + Sr(NO3)2(aq) → SrSO4(s) + NaNO3(aq)
A. Na2SO4(aq) + Sr(NO3)2(aq)
SISO4(s) + NaNO3(aq)
B. NaSO4(aq) + SINO3(aq) → SSO4(s) + NaNO3(aq)
C. Na2SO4(aq) → SrSO4(s) + 2NaNO3(aq)
Ο Ο
D. Na2SO4(aq) + 2Sr(NO3)2(aq) → 2SSO4(s) + 2NaNO3(aq)
Answer:
C. Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + 2 NaNO₃(aq)
Explanation:
Based on the equation:
Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + NaNO₃(aq)
As you can see, sulfate ions (SO₄) are been replaced for nitrate ions (NO₃). That is a double replacement reaction and is a very important information because 2 NO₃ ions in Sr(NO₃)₂ are producing 1 NO₃ ion. To balance NO₃:
Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + 2 NaNO₃(aq)
1 SO₄ ion in Na₂SO₄ produce 1 SO₄ ion in SrSO₄. And Na and Sr metals are balanced yet. Thus, the balanced form of this chemical equation is:
Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + 2 NaNO₃(aq)1 Ammonia, NH3, reacts with incredibly strong bases to produce the amide ion, NH2 -. Ammonia can also react with acids to produce the ammonium ion, NH4 +. (a) Which species (amide ion, ammonia, or ammonium ion) has the largest H ¬ N ¬ H bond angle? (b) Which species has the smallest H¬N¬H bond angle?
Answer:
a) ammonium ion
b) amide ion
Explanation:
The order of decreasing bond angles of the three nitrogen species; ammonium ion, ammonia and amide ion is NH4+ >NH3> NH2-. Next we need to rationalize this order of decreasing bond angles from the valence shell electron pair repulsion (VSEPR) theory perspective.
First we must realize that all three nitrogen species contain a central sp3 hybridized carbon atom. This means that a tetrahedral geometry is ideally expected. Recall that the presence of lone pairs distorts molecular structures from the expected geometry based on VSEPR theory.
The amide ion contains two lone pairs of electrons. Remember that the presence of lone pairs causes greater repulsion than bond pairs on the outermost shell of the central atom. Hence, the amide ion has the least H-N-H bond angle of about 105°.
The ammonia molecule contains one lone pair, the repulsion caused by one lone pair is definitely bless than that caused by two lone pairs of electrons hence the bond angle of the H-N-H bond in ammonia is 107°.
The ammonium ion contains four bond pairs and no lone pair of electrons on the outermost nitrogen atom. Hence we expect a perfect tetrahedron with bond angle of 109°.
4.The reaction of 0.25 g magnesium with 100.0 mL of 2 M hydrochloric acid (density d = 1.039 g/ml) raises the temperature of the solution from 20.0 °C to 35.0 °C. The specific heat for HCl is 3.98 J/(g.C). Mg(s) + 2HCl(aq) —> MgCl2(aq) + H2(g) Calculate the heat of the reaction. (Use the equation Q = s . m .ΔT where s is the specific heat, m is the mass of solution and ΔT is the change in temperature)
Answer:
[tex]Q=450.14J[/tex]
Explanation:
Hello,
In this case, for the given equation to compute the heat, we should compute the mass of the solution of hydrochloric acid, thus, the first step is to compute its reacting mass:
[tex]m_{HCl}^{reacting}=2\frac{mol}{L}*0.1000L *\frac{36.45g}{1mol}=7.29g[/tex]
Then, we obtain the total mass of the formed solution:
[tex]m=0.25g+7.29g=7.54g[/tex]
In such a way, we can infer that the specific heat of the solution is mainly the specific heat of hydrochloric acid, therefore the heat turns out:
[tex]Q=3.98\frac{J}{g\°C} *7.54g*(35.0\°C-20.0\°C)\\\\Q=450.14J[/tex]
Regards.
What is the name of this molecule? (will give BRAINLIEST)
A straight chain of four carbons. There is a triple bond between the second and third carbons when counting from left to right or right to left.
Answer:
2 - Butyne
Explanation:
The name of the molecule with a carbon atoms arranged in a straight chain with a triple bond between the second and third carbons is 2 - Butyne.
2- Butyne is an alkyne with structural formula given below. Some of the properties of Butyne include it is a produced artificially, it is volatile and colorless in nature.
Hence, the given molecules described is 2 - Butyne.
if 196L of air at 1 atm is compressed to 2600mL,what is the new temperature?
Answer:
Around 3.62 degrees kelvin
Explanation:
Assuming this is at STP:
The first step is to convert 2600mL to liters. There are 1000 milliliters in a liter, meaning that this is equal to 2.6L.
Now:
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\\\\\dfrac{196(1)}{273}=\dfrac{2.6(1)}{T_2} \\\\\\T_2\approx 3.62K[/tex]
Hope this helps!
Draw the Lewis structure of H2O. Include any nonbonding electron pairs. Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons. - CHONSPFBrClIXMore Request Answer Part B What is the electron geometry of H2O
Answer:
Concepts and reason
Lewis structure is a structure that explains the bonding between atoms of a molecule and lone pair of electrons that is present in the molecule is called a Lewis structure.
With the help of Lewis structure the electronic geometry of a molecule can be determine.
Fundamentals
According to Lewis structure, every atom and their position in the structure of a molecule by using its chemical symbol.
Lines connecting the atoms that are bonded to them are drawn. Lone pairs are expressed by pairs of dots and are located beside the atoms.
Lewis structure of [tex]H_{2}O[/tex] is, the total number of valence electrons is eight in [tex]H_{2}O[/tex].
what type of bond is most likely form between 2 gold atoms
Answer:
Metallic
Explanation:
"Metallic bonding is a type of chemical bonding that rises from the electrostatic attractive force between conduction electrons and positively charged metal ions. It may be described as the sharing of free electrons among a structure of positively charged ions." -Wikipedia
In the compound Fe2O3, iron's oxidation number is +3, and oxygen's oxidation
number is
Answer here
Answer: The oxygen's oxidation number is -2.
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
In [tex]Fe_2O_3[/tex], Fe is having an oxidation state of +3 called as cation and oxygen is an anion with oxidation state of -2. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]Fe_2O_3[/tex]
The cations and anions being oppositely charged attract each other through strong coloumbic forces and form an ionic bond.
Which process absorbs the greatest amount of heat?
a. the cooling of 10 g of liquid water from 100°C to 0°C.
b. the heating of 10 g of liquid water from 0°C to 100°C.
c. the freezing of 10 g of liquid water the melting of 10 g of ice.
d. the condensation of 10 g of gaseous water.
Answer:
b. the heating of 10 g of liquid water from 0°C to 100°C.
Explanation:
Hello,
In this case, we must notice a., c. and d. processes are not actually absorbing heat but releasing it since cooling, freezing and condensation are processes with negative heat sign since matter changes from a state of more energy to a state of less energy. We can prove this by realizing that freezing enthalpy of water is -6.00 kJ/mol, condensation enthalpy of eater is -40.8 kJ/mol and a change of temperature from 100 °C to 0 °C is negative.
In such a way, the only process absorbing heat is b. the heating of 10 g of liquid water from 0°C to 100°C since energy must be added to the system, or absorbed by it in order to attain the heating.
Regards.
The process having the greatest amount of heat is:
b. the heating of 10 g of liquid water from 0°C to 100°C.
Looking at all the options:The options a., c. and d. processes are not actually absorbing heat but releasing it since cooling, freezing and condensation are processes with negative heat sign since matter changes from a state of more energy to a state of less energy.
The freezing enthalpy of water is -6.00 kJ/mol, condensation enthalpy of eater is -40.8 kJ/mol and a change of temperature from 100 °C to 0 °C is negative.
So out of all the options, only process at b is a heating process thus it will absorb greatest amount of heat.
Find more information about Heat here:
brainly.com/question/13439286
Ba(OH)2:_______.
A. 1 barium atom, 1 oxygen atom and 1 hydrogen atom.
B. 1 barium atom, 1 oxygen atom and 2 hydrogen atoms.
C. 1 barium atom, 2 oxygen atoms and 2 hydrogen atoms.
D. 1 barium atom, 2 oxygen atoms and 1 hydrogen atom.
Answer: D
Explanation: Expand this (OH)2 you will get 2O, 2H
Hence 1Ba, 2O, 2H
Answer:
B. 1 barium atom, 1 oxygen atom and 2 hydrogen atoms.
A chemist working as a safety inspector finds an unmarked bottle in a lab cabinet. A note on the door of the cabinet says the cabinet is used to store bottles of diethylamine, tetrahydrofuran, chloroform, ethanolamine, and acetone. First, from her collection of Material Safety Data Sheets (MSOS), the chemist finds the following information:
liquid density
diethylamine 1.1 gcm-3
tetrahydrofuran 0.7 9gcm-3
chloroform 0.71 gcm-3
ethanolamine 0.89 gcm-3
acetone 1.6 gcm-3
Next, the chemist measures the volume of the unknown liquid as 0.767 L and the mass of the unknown liquid as 682 g.
1. Calculate the density of the liquid.
2. Given the data above, is it possible to identify the liquid?
3. If it is possible to identify the liquid, do so.
a. dimethyl sulfoxide.
b. acetone.
c. diethylamine.
d. tetrahydrofuran .
e. carbon tetrachloride
Answer:
1. density = 0.89 g/cm3
2. Yes is possible to identify the liquid
3. ethanolamine
Explanation:
Data:
mass = 682 g
volume = 0.767 L = 767 mL or cm3
1.
To calculate the density of the liquid it is necessary to know that the density formula is:
[tex]density=\frac{mass(g)}{volume(cm^{3}) }[/tex]
The data obtained is replaced in the formula:
[tex]density=\frac{682g)}{767(cm^{3}) }=0.89\frac{g}{cm^{3} }[/tex]
2.
With the given data it is possible to identify the liquid, this because the density value is a basic property of each liquid.
3.
It is possible to determine what liquid it is, since when comparing the value obtained with those reported in the collection of Material Safety Data Sheets (MSOS), the value that agrees is that of ethanolamine.
Indicate whether the following represents a Chemical or Physical change: Gasoline burns in air
Answer:
Chemical
Explanation:
Whenever "burns" is being used, most of the time it is a chemical change
Answer:
chemical change
Explanation:
it's a chemical change because when gas burn it produces water and carbon dioxide
Coral reefs support more species per unit area than any other marine
environment on Earth. What role do coral reefs play in the health of the
biosphere?
A. Coral reefs tend to drain nearby wetlands of stagnant water.
B. Their productive organisms play a major role in nutrient recycling.
C. Their colorful organisms attract millions of tourists each year.
D. Coral reefs require very specific environmental conditions.
SUBMIT
Answer:
B. Their productive organisms play a major role in nutrient recycling.
Explanation:
Coral reefs contain photosynthetic algae that help coral reefs in processing nutrients and contribute in the nutrient cycle.
The process of photosynthesis in corals leads to carbon fixing in which corals transform, carbon dioxide, into organic carbon. carbon fixing property allows corals to become primary producers.
Dissolve organic matter produced by corals is consumed by several organisms such as crabs, worms, fish, and snails.
Hence, coral reefs maintain the flow of energy and nutrient cycle in the biosphere and the correct option is B.
rinking water suggest an upper limit of 250 mg/L for chloride ion. If 1.03×104 liters of water in a storage tank contains 1.40 grams of Cl-, what is the contaminant level in ppm? in ppb? Is this level acceptable based on EPA guidelines?
Answer:
This water has a level acceptable, 0.1359ppm and 135.9ppb.
Explanation:
1.40g of Cl⁻ are:
1.40g Cl⁻ × (1000mg / 1g) = 1400mg Cl⁻
In 1.03x10⁴L:
1400mg / 1.03x10⁴L = 0.1359mg/L.
As the upper limit of Cl⁻ in water is 250mg/L, this water has a level acceptable
ppm are the ratio between mg of solute and liters of solution, that means the tank contains 0.1359mg/L = 0.1359ppm
ppb, parts per billion are 1000 times ppm, thus, parts per billion of the storage tank are:
0.1359ppm × 1000 = 135.9ppb
Hydrocarbon X has the formula C6H12. X reacts with one molar equivalent of hydrogen in the presence of a palladium catalyst to form a product having 12 primary hydrogens. Treatment of X with ozone followed by zinc in aqueous acid gives a mixture two aldehydes. What is the structure of X
Answer:
Explanation:
X( C₆H₁₂ )= (CH₃)₃-C-CH=CH₂
(CH₃)₃-C-CH=CH₂ + H₂ = (CH₃)₃-C-CH₂-CH₃ ( 12 primary hydrogen bonds )
(CH₃)₃-C-CH=CH₂ + O₃ = (CH₃)₃-C-CH= O + HCHO
What are the number of protons, neutrons, and electrons in 19 F
9?
Answer:
This isotope of fluorine has 9 protons, 9 electrons and 10 neutrons.
Explanation:
