what causes a 3 cylinder desiel engine to lead oil out of the hose going to the oil cover at top engine utube

Statement about the medium spiny neurons in the caudate and putamen

The false statement among the given options is: "They outnumber their target neurons in the globus pallidus by about a factor of 1,000."

Medium spiny neurons in the caudate and putamen are GABAergic, meaning they release the neurotransmitter gamma-aminobutyric acid (GABA). They do receive input from dopaminergic neurons, which play a crucial role in regulating the activity of medium spiny neurons. Additionally, medium spiny neurons are the major output neurons of the striatum, projecting their axons to various target areas.

However, it is incorrect to state that medium spiny neurons outnumber their target neurons in the globus pallidus by about a factor of 1,000. In reality, the connectivity and ratios between these neurons can vary, and the specific ratio mentioned here is not accurate. The connectivity and ratios between medium spiny neurons and their target neurons in the globus pallidus can be more complex and depend on various factors.

To know more about caudate and putamen here

https://brainly.com/question/31811397

#SPJ4

The spring constant of the heavy duty spring is 1.12 x 10^5 N/m.

To solve this problem using conservation of energy, we need to consider the initial potential energy of the elevator cabin when it is at a height of 80 m above the spring, and the final potential energy of the spring when it is compressed by 40 cm. The difference in potential energy will be equal to the energy absorbed by the spring as it is compressed.
Using the formula for gravitational potential energy, the initial potential energy of the elevator cabin is:
PEi = mgh = 1800 kg x 9.81 m/s^2 x 80 m = 1.41 x 10^6 J
When the elevator cabin hits the spring, all of its potential energy is converted into elastic potential energy stored in the spring. The formula for elastic potential energy is:
PEe = 1/2 kx^2
Where k is the spring constant and x is the displacement of the spring from its equilibrium position. In this case, x is equal to 0.4 m (40 cm) since the spring is compressed by 40 cm.
Equating the two potential energies and solving for k, we get:
1/2 kx^2 = mgh
k = 2mgh/x^2
k = 2(1800 kg)(9.81 m/s^2)(80 m)/(0.4 m)^2
k = 1.12 x 10^5 N/m
Therefore, the spring constant of the heavy duty spring is 1.12 x 10^5 N/m.

To know more about spring constant visit:
https://brainly.com/question/29975736
#SPJ11

The ranking from largest to smallest initial frequency is: Evita, Buffy, Aiko, Freja, Chandra.

To rank each member of the guitar septet based on the initial frequency of their low E string.

We can list the members in descending order

Evita = 5 Hz (highest initial frequency)

Buffy = 4 Hz

Aiko = 3 Hz

Freja = 3 Hz

Chandra = 1 Hz (lowest initial frequency)

Therefore, the ranking from largest to smallest initial frequency is: Evita, Buffy, Aiko, Freja, Chandra.

To know more about frequency here

https://brainly.com/question/14316711

#SPJ4

To answer your question, we need to use the conservation of momentum and conservation of energy principles. Since the collision between the two pendula is elastic, the total momentum and total energy before and after the collision remains the same.

Let's assume that the initial velocity of the bowling ball pendulum is v and the final velocity of both pendula after the collision is v'. According to conservation of momentum,
(m_bowlingball * v) = (m_bowlingball * v') + (m_golfball * v')
where m_bowlingball and m_golfball are the masses of the bowling ball and golf ball pendula respectively.
Similarly, using conservation of energy,
(1/2 * m_bowlingball * v^2) = (1/2 * m_bowlingball * v'^2) + (1/2 * m_golfball * v'^2) + m_golfball * g * h
where g is the acceleration due to gravity and h is the maximum height reached by the golf ball after the collision.
Solving these two equations for v' and h, we get:
v' = (m_bowlingball - m_golfball)/(m_bowlingball + m_golfball) * v
h = (m_bowlingball^2/(m_bowlingball + m_golfball)^2) * (v^2/2g)
Substituting the values given in the problem, we get:
v' = (16/21) * v
h = (256/441) * (v^2/2g)
Therefore, the approximate maximum height that the golf ball reaches after the collision is (256/441) * (v^2/2g), which is approximately 0.58 times the height from which the bowling ball was released.
Note: The exact height reached by the golf ball may vary slightly due to friction and air resistance.

To know more about momentum visit:
https://brainly.com/question/30677308
#SPJ11

Using Coulomb's law, the magnitude of the force (|FE|) between the two charged clouds can be calculated as:

|FE| = k * (|q1| * |q2|) / r^2

where k is Coulomb's constant, |q1| and |q2| are the magnitudes of the charges on the two clouds, and r is the distance between them.

Substituting the given values, we get:

|FE| = (9 x 10^9 N m^2/C^2) * (|-1.0 C| * |5.0 C|) / (1.5 x 10^3 m)^2

|FE| = (9 x 10^9 N m^2/C^2) * (5.0) / (1.5 x 10^3 m)^2

|FE| = 15 x 10^6 N

To express this answer in scientific notation with two significant figures, we can write:

|FE| = 1.5 x 10^7 N (rounded to two significant figures)

Therefore, the magnitude of the force between the two charged clouds is 1.5 x 10^7 N.

When you swim, you create a forward motion by pushing the water backwards. This action is known as propulsion or thrust. The reaction force is the force exerted by the water back onto the swimmer.

This force is equal in magnitude and opposite in direction to the force that the swimmer applies to the water. It allows the swimmer to move forward through the water.

The reaction force also creates a wake behind the swimmer, which is why you can feel the water moving around you when you swim.

The size of the reaction force depends on the speed and power of the swimmer's stroke, as well as the density and viscosity of the water.

Understanding the principles of propulsion and reaction is important for mastering the technique of swimming and improving your overall performance in the water.

To know more about swimmer please visit....

brainly.com/question/30829807

#SPJ11

Answer:

A) What is the moment of inertia of the bowling ball?

The moment of inertia of a bowling ball is 2/5mr

2

, where m is the mass of the ball and r is the radius. In this case, m=6 kg and r=10.8 cm=0.108 m. Therefore, the moment of inertia of the bowling ball is:

I=

5

2

​

(6 kg)(0.108 m)

2

=0.023328 kg m

2

B) What is the translational kinetic energy of the bowling ball?

The translational kinetic energy of a bowling ball is  

2

1

​

mv

2

, where m is the mass of the ball and v is the velocity. In this case, m=6 kg and v=8 m/s. Therefore, the translational kinetic energy of the bowling ball is:

KE

t

​

=

2

1

​

(6 kg)(8 m/s)

2

=192 J

C) What is the initial rotational kinetic energy of the bowling ball?

The initial rotational kinetic energy of a bowling ball is  

2

1

​

Iω

2

, where I is the moment of inertia of the ball and ω is the angular velocity. In this case, I=0.023328 kg m

2

 and ω=v/r=8 m/s/0.108 m=74.074 rad/s. Therefore, the initial rotational kinetic energy of the bowling ball is:

KE

r

​

=

2

1

​

(0.023328 kg m

2

)(74.074 rad/s)

2

=119.36 J

D) The bowling ball comes to the bottom of a ramp that is inclined 20 degrees with respect to the horizontal. What maximum height will the ball reach up this ramp?

The maximum height that the ball will reach up the ramp can be found using the following equation:

h=

2g

v

2

​

sin

2

(θ)

where v is the initial velocity of the ball, g is the acceleration due to gravity, and θ is the angle of the ramp. In this case, v=8 m/s, g=9.8 m/s

2

, and θ=20

∘

. Therefore, the maximum height that the ball will reach up the ramp is:

h=

2(9.8 m/s

2

)

(8 m/s)

2

​

sin

2

(20

∘

)=1.53 m

Explanation:

The expansion of the universe becomes more apparent when considering the vast distances between galaxies. At these larger scales, the influence of gravity weakens, and the expansion due to dark energy dominates. This leads to galaxies moving away from each other over time as the universe continues to expand.

We know that the universe is expanding because of the observations made by Edwin Hubble in the 1920s. Hubble found that the galaxies were moving away from each other and that the farther apart they were, the faster they moved away. This is evidence of cosmic expansion, and it is believed that this expansion is caused by a mysterious force known as dark energy. It is also observed that the light from distant galaxies is shifted to the red end of the spectrum. This redshift occurs because the galaxies are moving away from us and their light waves are stretched out as they travel through expanding space. This is a strong evidence of cosmic expansion because it shows that the galaxies are not just moving away from us, but also from each other.

Computer simulations of the universe's evolution also support the idea of cosmic expansion. These simulations show how gravity causes the matter in the universe to clump together to form galaxies and clusters, while dark energy causes the expansion of the universe to accelerate. The evidence strongly suggests that the stars within a galaxy move away from one another due to the expansion of the universe. This is a fundamental concept in cosmology and has important implications for our understanding of the universe's past, present, and future. By studying cosmic expansion, scientists hope to gain insights into the nature of dark energy and the ultimate fate of the universe.

To know more about gravity visit :-

https://brainly.com/question/31816446

#SPJ11

The schedule that is not an intermittent schedule is FR 1.

Intermittent schedules of reinforcement involve reinforcing a behavior only some of the time, rather than every time it occurs. This type of reinforcement schedule is often used in behavior modification and can result in more persistent and resistant behavior.

The four reinforcement schedules mentioned in the question are:

Fixed Ratio (FR): Reinforcement is delivered after a fixed number of responses.

Variable Ratio (VR): Reinforcement is delivered after a variable number of responses.

Fixed Interval (FI): Reinforcement is delivered for the first response after a fixed interval of time has elapsed.

Variable Interval (VI): Reinforcement is delivered for the first response after a variable interval of time has elapsed.

Out of these four schedules, FR 1 is not an intermittent schedule because it involves reinforcing a behavior after every single occurrence. In other words, it is a continuous schedule of reinforcement.

FR 1 involves reinforcing a behavior after a fixed number of responses, where the number is one. This means that every time the behavior occurs, it is immediately followed by reinforcement, which is not intermittent. The other schedules involve some degree of variability in the number or timing of responses required for reinforcement, making them intermittent schedules.

Learn more about intermittent schedule  

https://brainly.com/question/30329122

#SPJ11

The newly discovered element with atomic number 108 and atomic mass 277 has a neutral atom with 108 protons, 169 neutrons, and 108 electrons.

The atomic number of an element represents the number of protons in its nucleus, which determines its identity. In this case, the element has an atomic number of 108, indicating that it has 108 protons. Since the atom is neutral, it means that the number of electrons is equal to the number of protons. Therefore, there are also 108 electrons orbiting the nucleus.

To find the number of neutrons, we subtract the atomic number from the atomic mass. The atomic mass represents the sum of protons and neutrons in the nucleus. In this case, the atomic mass is 277, and the atomic number is 108. Subtracting 108 from 277 gives us 169 neutrons.

In summary, a neutral atom of this newly discovered element with an atomic number of 108 and atomic mass of 277 consists of 108 protons, 169 neutrons, and 108 electrons.

Learn more about atomic masshere:

https://brainly.com/question/29117302

#SPJ11

The period of a motion refers to the time it takes for one complete cycle of the vibration or oscillation. The frequency, on the other hand, is the number of cycles per second. Therefore, the period of the tuning fork's vibration is 0.0045 seconds. This means that it takes 0.0045 seconds for the tuning fork to complete one cycle of its vibration.

In this case, we are given that a tuning fork vibrates at a frequency of 222 Hz and has an amplitude of 0.894 mm at each tip of its two prongs. To find the period of this motion, we can use the formula:
Period = 1 / Frequency
Plugging in the given frequency of 222 Hz, we get:
Period = 1 / 222
Simplifying this expression, we get:
Period = 0.0045 seconds

to know more about oscillation visit:

https://brainly.com/question/31837305

#SPJ11

The correct answer is A. A water molecule entering the lake will remain in the lake for 600 years.

Residence time refers to the average amount of time that a water molecule spends in a particular body of water, such as a lake. In the case of Lake Tahoe, the residence time is approximately 600 years. This means that, on average, a water molecule that enters the lake will remain in the lake for 600 years before leaving through the outlet.

Option B is incorrect because the total volume of water in Lake Tahoe can vary due to precipitation, evaporation, and other factors.

Option C is also incorrect because the residence time of water in Lake Tahoe does not necessarily relate to the ability of the lake to sustain aquatic life.

Option D is incorrect because outflow from Lake Tahoe occurs regularly and is not limited to once every 600 years.

Learn more about residence time

brainly.com/question/13103571

#SPJ11

To fully describe the velocity of the bicyclist, we would need to know both the units (likely km/hour) and the direction (e.g. north, south, east, west). Without this information, we can only make assumptions and calculations based on what we do know.

To answer your question, the missing piece in the bicyclist's velocity is the units. It's important to note that velocity is a vector quantity, meaning it has both magnitude and direction. In this case, the direction is not given, but we know the distance traveled (50 km) and the average velocity (35).
Average velocity is calculated by dividing the total distance traveled by the total time taken. So if we assume the bicyclist took 2 hours to complete the 50-km race, the average velocity would be 25 km/hour. However, since the bicyclist claims their average velocity was 35, we can assume that either the units are missing or they made a mistake in their calculation.

To know more about velocity visit :

https://brainly.com/question/30559316

#SPJ11

D. luminosity and surface temperature are the two physical parameters of stars that are plotted in the Hertzsprung-Russell (H-R) diagram. The H-R diagram is a graph that plots the luminosity (or brightness) of stars against their surface temperature (or color).

It allows astronomers to classify stars based on their properties and evolutionary stages. The luminosity is usually represented on the vertical axis, while the surface temperature is represented on the horizontal axis. The H-R diagram is an essential tool for understanding stellar evolution, and it shows the relationship between a star's temperature, luminosity, and evolutionary stage.

To know more about physical parameters click this link -

brainly.com/question/30158745

#SPJ11

The van't Hoff factor of Na3PO4 in this solution is 3.01.

The van't Hoff factor (i) can be calculated using the formula:

ΔTf = Kf * i * molality

where ΔTf is the freezing point depression, Kf is the freezing point depression constant, molality is the molal concentration, and i is the van't Hoff factor.

We know that ΔTf = -2.6°C and the molality of the solution is 0.40 m.

The freezing point depression constant (Kf) for water is 1.86°C/m.

Substituting these values in the equation, we get:

-2.6°C = (1.86°C/m) * i * 0.40 m

Solving for i, we get:

i = -2.6°C / [(1.86°C/m) * 0.40 m] = 3.01

Therefore, the van't Hoff factor of Na3PO4 in this solution is 3.01.

To know more about van't Hoff factor , refer here :

https://brainly.com/question/30540760#

#SPJ11

the rocket will rise an additional height of 18.6 meters before it reaches its maximum height and begins to fall back down to Earth. By using formula of potential energy  = mgh. This calculation assumes that air resistance is negligible.

To calculate the additional height the rocket will rise, we need to use the conservation of energy principle. The initial kinetic energy of the rocket, given as 1950 J, will be converted entirely to potential energy as the rocket rises.
We can use the formula for gravitational potential energy:
PE = mgh
where PE is potential energy, m is the mass of the rocket, g is the acceleration due to gravity (approximately 9.81 m/s^2), and h is the height the rocket rises.
Rearranging the formula, we get:
h = PE / (mg)
Substituting the given values, we get:
h = 1950 J / (10.5 kg x 9.81 m/s^2)
h = 18.6 meters
To know more about potential energy Visit:

https://brainly.com/question/3910603

#SPJ11

The people outside of a plane do not hear the same sound volume as those inside the plane. the nuclear volume of the sound outside the plane is likely to be much lower and may not cause the same level of discomfort or hearing damage.

The sound waves are inside an enclosed space like a plane cabin, they bounce off the walls and ceiling, which can amplify the volume of the sound. On the other hand, when sound waves are outside, they can disperse in all directions, and the distance between the source of the sound and the listener can affect how loud the sound is perceived. Another factor that affects the nuclear volume of sound inside and outside a plane is the type of sound. For example, the sound of the engines is likely to be much louder outside the plane, while other sounds like conversations may be louder inside the cabin. In general, the sound volume inside a plane can be quite high, especially during takeoff and landing, and it is important for passengers to protect their hearing by using earplugs or noise-cancelling headphones. However, the volume of the sound outside the plane is likely to be much lower and may not cause the same level of discomfort or hearing damage.

learn more about nuclear here.

https://brainly.com/question/13090058

#SPJ11

The threshold frequency (f0) for sodium metal, at which electrons are just barely ejected, can be estimated based on the observation that no electrons are ejected at 540 nm. Since frequency (f) and wavelength (λ) are inversely proportional, we can calculate the threshold frequency using the equation f = c/λ, where c is the speed of light. By substituting the given wavelength (540 nm) into the equation, we can determine an approximate value for the threshold frequency of sodium metal.

To find the threshold frequency (f0), we can use the equation f = c/λ, where f represents the frequency, c is the speed of light (approximately 3 x 10^8 meters per second), and λ is the wavelength. Since no electrons are ejected at a wavelength of 540 nm, we can substitute this value into the equation to calculate the corresponding frequency.

Converting the wavelength to meters (λ = 540 x 10^(-9) meters), we can substitute it into the equation: f = (3 x 10^8 meters per second) / (540 x 10^(-9) meters). Simplifying this expression yields a threshold frequency of approximately 5.56 x 10^14 Hz.

Therefore, the estimated threshold frequency for sodium metal is approximately 5.56 x 10^14 Hz. It represents the minimum frequency required to overcome the binding energy of electrons in sodium metal and cause their ejection.

learn more about frequency here:brainly.com/question/29739263

#SPJ11

The object is located 10.4 cm away from the concave mirror.

1/f = 1/v + 1/u

Substituting the given values into the formula, we get:

1/-8.20 = 1/18.8 + 1/u

Multiplying both sides by -8.2018.8u, we get:

u = -8.20*18.8/(-8.20+18.8) = 10.4 cm

A concave mirror, also known as a converging mirror, is a curved mirror with a reflective surface that curves inward like the interior of a sphere. When light rays pass through the concave mirror, they converge and intersect at a point known as the focal point. This point is located on the principal axis, which is an imaginary line that passes through the center of the mirror and the focal point.

Concave mirrors have a variety of applications, including in telescopes, searchlights, and headlights. In a telescope, a concave mirror is used to gather and focus light from distant objects, making them appear closer and clearer. In a searchlight or headlight, a concave mirror is used to reflect light in a specific direction, creating a powerful beam of light.

To know more about Concave mirror refer to-

brainly.com/question/31379461

#SPJ4

The wavelength (in meters) of a wave traveling along the x-axis, with a given y-displacement, can be found by analyzing the equation provided. Unfortunately, you did not provide the equation in your question. If you can provide the equation, I would be happy to help you determine the wavelength of the wave traveling along the x-axis.

to know more about wavelength visit:

https://brainly.com/question/7143261

#SPJ11

Assume that the wave is a simple sinusoidal wave, then we can use the equation: wavelength = speed of wave / frequency of wave

To determine the wavelength of the wave, we need to first identify its wave pattern. The equation provided only gives us information about the y-displacement of the wave, but we need to know how the wave behaves in the x-direction as well. Without this information, we cannot determine the wavelength.

To determine the wavelength of a wave traveling along the x-axis, you need the equation for the wave's y-displacement. However, the equation you intended to provide seems to be missing. Typically, a wave's displacement is described by a sinusoidal function, such as y(x) = A * sin(kx - ωt), where A is amplitude, k is the wave number (2π/λ), λ is the wavelength, ω is the angular frequency, and t is time.

Once you have the equation, you can find the wavelength (λ) by determining the wave number (k) and using the relationship λ = 2π/k.

To know about wave :

https://brainly.com/question/25954805

#SPJ11

Answer:

Explanation:

What is current?

Current is the flow of electric charge through a conductor or a circuit. It is measured in amperes (A), and it is the rate at which charge flows past a given point in a circuit.

How to calculate resistance in a parallel circuit?

In a parallel circuit, the total resistance (Rtotal) can be calculated using the following formula:

1/Rtotal = 1/R1 + 1/R2 + 1/R3 + ...

Where R1, R2, R3, ... are the resistances of each resistor in the circuit. Once you have calculated the total resistance, you can calculate the current in each branch of the circuit using Ohm's law (I = V/R).

Answer

yes

Example

The adiabatic compression of an ideal gas.

since the process is an adiabatic process,Q=0.

The work done by the external ageant increases the internal energy of a gas.

The average acceleration of the runner at the initial instant t0 (when the runner started from rest) is 3.5 m/sec^2.

To answer your question, we first need to calculate the acceleration of the runner. We can use the formula:
acceleration = (final velocity - initial velocity) / time
In this case, the final velocity is 7 m/sec, the initial velocity is 0 m/sec (since the runner started from rest), and the time is 2 seconds. So we can plug these values into the formula:
acceleration = (7 m/sec - 0 m/sec) / 2 sec
acceleration = 3.5 m/sec^2

To know more about acceleration visit :-

https://brainly.com/question/2303856

#SPJ11

The sum of the formal charges of the atoms in a molecule or polyatomic ion must equal the overall charge of the species. Formal charge is a way of keeping track of the distribution of electrons in a molecule or ion.

It is calculated by subtracting the number of electrons assigned to an atom in a molecule from the number of valence electrons of that atom in the neutral state. For a neutral molecule, the sum of the formal charges of all the atoms should be zero. For a polyatomic ion with a positive or negative charge, the sum of the formal charges of all the atoms should be equal to the overall charge of the ion. This is a useful tool for determining the most likely arrangement of atoms in a molecule or ion, and for predicting the polarity of a molecule.

To know more about polyatomic ion click here:

brainly.com/question/792714

#SPJ11

The second-order fringes for the two wavelengths are 9.1 x 10^-4 m and 7.75 x 10^-4 m apart on the screen, respectively.

To answer this question, we need to use the equation for the distance between fringes on a screen due to light passing through two slits:
y = (λL) / d
where y is the distance between fringes, λ is the wavelength of the light, L is the distance from the slits to the screen, and d is the distance between the slits.

For the first wavelength, λ = 730 nm = 7.3 x 10^-7 m, and for the second wavelength, λ = 620 nm = 6.2 x 10^-7 m.

We also know that d = 0.80 mm = 8 x 10^-4 m and L = 1.0 m.

Using the equation for each wavelength, we get:
For the first wavelength:
y = (7.3 x 10^-7 m)(1.0 m) / (8 x 10^-4 m)
y = 9.1 x 10^-4 m

For the second wavelength:
y = (6.2 x 10^-7 m)(1.0 m) / (8 x 10^-4 m)
y = 7.75 x 10^-4 m

So the second-order fringes for the two wavelengths are 9.1 x 10^-4 m and 7.75 x 10^-4 m apart on the screen, respectively. This is due to the different wavelengths of light, which causes the interference pattern to have different spacing between fringes.

To know more about wavelength visit:

https://brainly.com/question/31143857

#SPJ11

A lens with a diameter of 100 cm has a theoretical resolution limit of about 0.011 arcseconds for visible light observations.

The resolution of a telescope or lens is determined by its aperture size and the wavelength of the observed light. The theoretical limit of resolution is given by the Rayleigh criterion, which states that the smallest angular separation between two objects that can be resolved is approximately equal to the wavelength of the observed light divided by the aperture diameter.

For a lens of diameter 100 cm, the resolution can be estimated as:

resolution = wavelength / aperture diameter

Assuming a typical visible light arcseconds of 500 nm (5 x 10^-7 m), we can convert this to arcseconds using the formula:

1 radian = 206265 arcseconds

Therefore, the resolution in arcseconds is:

resolution = (wavelength / aperture diameter) * (180 / pi) * 3600 * 206265

resolution = (5 x 10^-7 m / 100 m) * (180 / pi) * 3600 * 206265

resolution ≈ 0.011 arcseconds

So a lens with a diameter of 100 cm has a theoretical resolution limit of about 0.011 arcseconds for visible light observations.

To know more about arcseconds , refer here:

https://brainly.com/question/30512979#

#SPJ11

Answer:

F= 129.6 N ≈ 130 N

Explanation:

According to Hook's Law:

F = kx

F = Force necessary to stretch the spring

k = spring constant

x = displacement of the spring (stretch in the spring), in meters

Given x = 48 cm = 0.48 m

k = 270 N/m

F = kx

F = (270 N/m)(0.48 m) = 129.6 N

F = 129.6 N ≈ 130 N

The law of reflection states that when light strikes a flat surface and is reflected, you can draw a line perpendicular to the surface so that the angle of incidence (light moving toward the surface) and the angle of reflection (light reflected away from the surface) will be equal.

If the angle of incidence O1, is 22 degrees, what is the angle of reflection is also 22 degree.

When two distinct media come together at an interface, a wavefront might reverse direction so that it returns to the first medium, which is known as reflection. The reflection of light, sound, and water waves are typical examples. According to the law of reflection, the angle at which the wave impinge on the surface matches the angle at which it is reflected for specular reflection (such as at a mirror).

To know more about Reflection :

https://brainly.com/question/30270479

#SPJ1.

The weight of a typical froghopper with a mass of 12.3 mg is approximately 0.0001206 Newtons.

To calculate the weight of a typical froghopper in Newtons, you need to use the formula: weight (in Newtons) = mass (in kg) × gravity (9.81 m/s²).

1. First, convert the mass of the froghopper from milligrams (mg) to kilograms (kg): 12.3 mg = 0.0000123 kg (divide by 1,000,000).

2. Next, multiply the mass (in kg) by the acceleration due to gravity (9.81 m/s²):
Weight (Newtons) = 0.0000123 kg × 9.81 m/s².

3. Finally, calculate the weight:
Weight (Newtons) ≈ 0.0001206 N.

The weight of a typical froghopper with a mass of 12.3 mg is approximately 0.0001206 Newtons.

Learn more about "weight ":

https://brainly.com/question/25973294

#SPJ11