Share four pieces of content from others for each self-promotional item you post.
What does the 4 1 rule state group of answer choices?Post one video for every four photos. Share one item of material from others for every four pieces of self-promotional content you upload. There is a place for such kind of content, but your non-promotional postings ought to predominate over your promotional ones. Use the 80-20 rule, where 80% of your material is interesting, social content that your followers want to see, and the remaining 20% is commercial information.
Prior to completing a purchase, B2B buyers often read up to eight vendor-created pieces of information and five pieces from other sources, per FocusVision study. This content consists of videos, blog entries, whitepapers, analyst reports, testimonials, and reviews. The Rule of Four states that for a case to be accepted for review by the Court, four justices must vote in favour of reviewing it.
To learn more about 80/20 rule refer to :
https://brainly.com/question/26293311
#SPJ4
When entering the interstate, check for a gap in traffic in the nearest lane, adjust your speed to match traffic, signal, and:
When entering the interstate, check for a gap in traffic in the nearest lane, adjust your speed to match traffic, signal, and merge into the lane.
What is interstate?
Interstate is a term used to refer to the network of highways that connects the states within the United States of America. Interstate highways are the primary means of long-distance travel in the country and are maintained by the Federal Highway Administration. These highways are numbered for easy identification, and most are limited access highways with multiple lanes for both car and truck traffic. The Interstate Highway System includes more than 42,000 miles of highways and is the largest highway system in the world. The highways are typically divided into two or three lanes in each direction and speed limits are usually set between 55 and 75 miles per hour. Interstate highways also feature rest stops, gas stations, and restaurants, which provide travelers with necessary amenities during long-distance trips.
To learn more about interstate
https://brainly.com/question/30328725
#SPJ4
[what assumptions are we making with regards to the project? what are we assuming will or will not happen in our project? besides the information provided in the week 1 getta byte video, list at least three other project assumptions.]
Any project element that is assumed to be true, actual, or certain without supporting evidence or demonstration, according to the Project Management Institute, is an assumption.
What types of assumptions are there?You can hold an assumption even in the absence of supporting data. For example, even if it is untrue, people may assume you are a nerd if you wear glasses. or exemplary.
Why are assumptions crucial to projects?In order to create solid project frameworks, project assumptions are a crucial part of project management. However, as it is difficult to know every potential variable in a project, assumptions are crucial to planning.
To know more about project management visit:-
https://brainly.com/question/15610382
#SPJ4
for the ease of computation, it is important that the collection of data types and structures in a programming language matches the objects in the problem being addressed
Yes, it is crucial for a programming language's data collection types and structures to match the objects in the situation at hand.
Describe data type
A data type (or simply type) is a collection or grouping or data values in computer science and computer programming that is often defined by a set of potential values, a set of permitted operations on these values, and/or a portrayal of these values as machines. The various values that only an expression, such as a variable or a function call, may take are limited by the data type specification in a programme. It describes to the engine or interpreter how well the programmer wants to use literal data and is only applicable to literal data. The majority of computer languages provide integer numbers as basic data types.
To know more about data type
https://brainly.com/question/14581918
#SPJ4
which two of the following applications of the internet in campaigning are the most useful to candidates?
Answer:
The authors of the Federalist Papers argued that the - Constitution gave the states too much power and should be rejected.
Explanation:
"proxy error: could not proxy request /fetchcountries from localhost:3000 to http://localhost:5000/. see https://nodejs.org/api/errors.html" how to solve this problem?
Change localhost in your package.json's proxy command to 127.0.0.1 and restart your development server to resolve the error "Could not proxy request from localhost:3000 to http://localhost:5000."
What is Proxy Error?Proxy errors show that access to a particular website or URL is denied to online users. This restriction is put in place by the organization's Internet administrator or by the person who created the website or URL to safeguard private information that should only be seen by certain people.
Consequently, the server returns a http error code when a request you send to a web server through a proxy fails. You must be aware of the meaning of such error codes in order to comprehend them and take appropriate action because it is imperative that you continue using the proxy.
In the business world of 2020, proxy servers are the new solutions. Its main goals are to address the most pressing issues that many contemporary businesses are currently experiencing, namely a lack of data or information.
Learn more about Proxy Error
https://brainly.com/question/14403686?
#SPJ4
While reviewing a Web site about a medical condition your aunt was just diagnosed with, you decide to check on the writer of the site. You verify that the writer is a well-known doctor and is a frequent television expert on this medical condition. What characteristic of an effective Web site does this show?
A) relevant information
B) reputable author
C) verified data
D) unbiased presentation
Answer:
B) reputable author
E2020 GG 100% VERIFIED
TRUE OR FALSE no matter what type of object you select, if you select a grip on the object and right click, the menu will always have the same options available.
If you choose a grip on an object and right-click, the menu will always have the same choices no matter what kind of object you choose. The response is untrue.
Which AutoCAD command must be used to pick out a specific polyline section?When you click over a single arc or line segment, also known as a subobject, within a polyline, you can select it by holding down the Ctrl key (not available in AutoCAD LT). The prompt's Open option takes the place of the Close option if the polyline you choose is a closed polyline.
Why is AutoCAD only allowing me to select one object?When asked to add an additional object, click it while holding down the Shift key to include it in the selection set.
To know more about Ctrl key visit:-
brainly.com/question/30075502
#SPJ4
When using analytics programmes on your website, which of these do not fall under the category of a dimension?
O The device users access the site with
O The time a user spends on the site
O The browser a user uses to visit the site
O The geographical location of the user
The amount of time a person spends on your website does not qualify as a dimension when using analytics software.
What is program analysis?The process of automatically evaluating a computer program's performance in terms of a property like correctness, robustness, safety, and liveliness is known as program analysis.The two primary focuses of program analysis are program optimization and program correctness.In the former, emphasis is placed on ensuring that the program operates as intended, whereas in the latter, it is placed on improving program performance while consuming less resources.Static program analysis is performed before or after the program is run, dynamic program analysis is performed while the program is executing, or both can be done simultaneously.The four sorts of reasoning that make up the core of program analysis tools are:Concrete code-derived runs,Seeing runs in concreteUsing observations to extrapolate abstractions, andConducting experiments to pinpoint the causes of certain effects.Therefore, the amount of time a user spends on your website does not qualify as a dimension when you use analytics programs on it.
To Learn more About analytics software refer TO:
https://brainly.com/question/23860654
#SPJ4
TRUE OR FALSE applied geometric constraints can be removed by selecting the constraint flag and then pressing the delete key on the keyboard.
It is TRUE that The constraint flag can be selected, then the delete key on the keyboard can be used to remove any applicable geometric limitations.
Many CAD applications, including AutoCAD, Inventor, and other programs of a such nature, provide this as a standard feature. The user can change the design without being constrained by the restrictions that had already been placed by removing constraints.
When removing restrictions, it's crucial to exercise caution because doing so could have an impact on the overall design or lead to model errors. Before removing any limits, it is always advised to keep a backup of the design. It is an effective tool for designers to change the design to suit their needs. The geometric constraints are eliminated, allowing for flexibility in the design process and the exploration of other solutions while keeping the design's needs and specifications. It is simple to update and modify the design to meet user needs because geometric limitations can be removed.
Find out more about geometric constraints
brainly.com/question/13643976
#SPJ4
Which of the following options allows you to align text so that it is fully flush with both margins?
a. Align Right
b. Center
c. Justify
d. Align Left
According to the question, Justify allows you to align text so that it is fully flush with both margins.
What is margins?
Margins are the spaces that are left around the edge of a document. They are important in document design and layout, as they provide visual balance and organization. Margins are typically measured in inches or centimeters and can be adjusted to the user’s preference. Margins are used to separate the text from the edge of the page or other elements on the page such as images. Margins can also be used to create a hierarchy within the document, by making headings or titles larger and more prominent than the body text. Additionally, margins can be used to emphasize certain parts of the text or to set off important information.
To know more about margins
https://brainly.com/question/28579662
#SPJ4
Wifi, cell phone towers and telephone cables are examples of information systems in the ITC framework. 14 True False One of the disadvantages of desktop computers is that it is very expensive and require specialized hardware, software and list of cooling to operate.true false
Answer:true
Explanation:
. Suppose you have a computer and you're wanting to know if the IP address is being blocked or if SSH traffic is being blocked. What would you do to be able to determine which one actually is happening? Make sure to explain both cases.
Explain how you could prevent a host from being allowed to access a system for SSH.
To determine if an IP address is being blocked or if SSH traffic is being blocked, I would do the following:
Check the firewall settings on the computer or network. This can be done by accessing the router or firewall settings and looking for any rules that block specific IP addresses or traffic on specific ports (such as port 22 for SSH traffic).
Try to access the computer using the IP address from a different device or location. If the connection is refused or times out, it could be an indication that the IP address is being blocked.
Try to connect to the computer using SSH from a different device or location. If the connection is refused or times out, it could be an indication that SSH traffic is being blocked.
Check the system or application logs for any error messages or alerts related to blocked IP addresses or traffic.
To prevent a host from being allowed to access a system for SSH, I would do the following:
Configure the firewall to block incoming traffic on port 22 from the specific IP address or range of IP addresses.
Configure the SSH server to only accept connections from specific IP addresses or ranges of IP addresses.
Use an intrusion detection system (IDS) or intrusion prevention system (IPS) to monitor and block attempts to connect to the SSH server from unauthorized IP addresses or ranges of IP addresses.
Use access control lists (ACLs) to limit access to the SSH server to specific users or groups of users.
Use a combination of these methods for maximum security, such as using a firewall to block traffic from unauthorized IP addresses, and then using access controls to limit the users that can connect to the server once the traffic is allowed.
the abbreviation lad refers to which of the following aspects of the nativist approach to language development? group of answer choices an acquired process of language development a learned language processor an innate language processor a language directional device
Language Acquisition Tool (LAD). Language is a uniquely human accomplishment, according to Noam Chomsky's nativist theory of language evolution.
What is the nativist approach to language development?According to nativist theory, children naturally organise the rules of language, making it simple for them to pick up a native tongue. They contend that children possess linguistic skills that help them on their path to language mastery.According to the nativist theory, our brains are predisposed to acquire languages from an early age. Regardless of their surroundings, nativists contend that children are hardwired to learn language. According to the behaviourist theory, imitation is one of the actions that leads to the development of language.Four theoretical orientations—structural, cognitive, psychological, and functional—can be used to categorise the various teaching strategies in this essay.To learn more about Acquisition refer to:
https://brainly.com/question/29644707
#SPJ4
NIST, in its special publication 800-61r2, refines the mitigation phase by breaking it down into which of the following steps?
NIST, in its special publication 800-61r2, refines the mitigation phase by breaking it down into plan and prepare, identify and classify, contain, eradicate, and recover.
What is mitigation?Mitigation is a set of strategies and actions that are taken to reduce or minimize the potential negative impacts of a hazard, such as a natural disaster or man-made event. It may involve physical measures, such as building a levee or constructing a seawall, or it may involve non-structural measures such as public awareness campaigns and training. Mitigation can also include the implementation of land-use planning and zoning, and the establishment of building codes to ensure that structures are built with the appropriate level of safety. Mitigation is an important part of emergency preparedness and risk management, as it can reduce the risk of damage and loss of life.
To learn more about mitigation
https://brainly.com/question/23971370
#SPJ4
A machine learning model is trained to predict tumor in patients. The test dataset consists of 100 people. Calculate the Accuracy, Precision, Recall and F1-Scorebased on the given confusion matrix. What is the weakness and strength of this model?
Answer:
Explanation:
Confusion matrix:
Actual Negative Actual Positive
Predicted Negative 50 20
Predicted Positive 10 20
Accuracy = (50 + 20) / 100 = 0.7
Precision = 20 / (20 + 10) = 0.67
Recall = 20 / (20 + 20) = 0.5
F1-Score = 2 * (Precision * Recall) / (Precision + Recall) = 0.57
A model's strength is measured by its ability to accurately predict the positive class, which is measured by precision, and by its ability to find all the positive instances, which is measured by recall. A model's weakness is measured by its ability to accurately predict the negative class, which is measured by the true negative rate.
In this case, the model has a high accuracy of 0.7, however, it has a low precision of 0.67 and recall of 0.5, and a low F1-Score of 0.57. This means that the model is not very good at correctly identifying positive cases, and is also not very good at correctly identifying negative cases. This model is not a good model for this problem and it is needed to improve the model.
according to the map below, which of the following is the most likely location of the famc lignite mine?
The most likely location of the FAMC lignite mine according to the map is Latrobe Valley Basin.
Lignite has a higher volatile matter content than higher-ranking coals, making it easier to convert into gas and liquid petroleum products. Unfortunately, its high moisture content and susceptibility to spontaneous combustion make transportation and storage difficult. Water removal processes reduce the risk of spontaneous combustion to the same level as black coal, increase the calorific value of brown coal to a level comparable to or better than most black coals, and significantly reduce the emissions profile of 'densified' brown coal to a level comparable to or better than most black coals. However, removing the moisture raises the final cost of the lignite fuel.
When exposed to air, lignite degrades rapidly. This is referred to as slacking or slackening.
Learn more about Petroleum here:
https://brainly.com/question/27428790
#SPJ4
Consider the following method, inCommon, which takes two Integer ArrayList parameters. The method returns true if the same integer value appears in both lists at least one time, and false otherwise.public static boolean inCommon(ArrayList a, ArrayList b){for (int i = 0; i < a.size(); i++){for (int j = 0; j < b.size(); j++) // Line 5{if (a.get(i).equals(b.get(j))){return true;}}}return false;}Which of the following best explains the impact to the inCommon method when line 5 is replaced by for (int j = b.size() - 1; j > 0; j--) ?A. The change has no impact on the behavior of the method.B. After the change, the method will never check the first element in list b.C. After the change, the method will never check the last element in list b.D. After the change, the method will never check the first and the last elements in list b.E. The change will cause the method to throw an IndexOutOfBounds exception.
After the change, the method will never check the first element in list b, explains the impact to the in Common method when line 5 is replaced by for (int j = b.size() - 1; j > 0; j--).
What is element?In computing, a "element" is a more compact component of a bigger system. In computer programming, an array is a list that is stored that contains different elements or pieces of data.
There are four key components in every programming language I've come across so far. Variables, conditionals, loops, and functions are some examples. if discussing Hypertext Markup Language. The term Elements is frequently used as an acronym for Adobe Photoshop Elements.
An element is a discrete component of a bigger group. For instance, in computer programming, an array may contain various elements (indexed), each of which may be stored and used independently.
Learn more about components
https://brainly.com/question/29377319
#SPJ4
is there a service bulletin on mtd snow blowers regarding drive disk cable to tight and cant adjust it?
Yes, there is a service bulletin on mtd snow blowers regarding drive disk cable to tight and cant adjust it.
What is snow blowers?A snow blower or snow thrower is a device used to clear snow from troublesome areas like a driveway, sidewalk, road, railroad track, ice rink, or runway. The term "snow blower," which is frequently used, is inaccurate because the snow is actually moved with an auger or impeller rather than being blown (by air).
It can throw snow to another location or into a truck to be hauled away using electric power (line power or battery), as well as a gasoline or diesel engine. Snow ploughs, on the other hand, push snow to the front or side of a vehicle. Snow is usually discharged to one side.
Learn more about snow blowers
https://brainly.com/question/4439903
#SPJ4
Which of the following is the cyber threat intelligence model that have been widely used in the industry?Choose the correct option from below list(1)The Diamond Model of intrusion analysis(2)Both the options(3)The Cyber Kill Chain(4)None of the options
The Cyber Kill Chain is the cyber threat intelligence model that has been widely used in the industry.
What is cyber threat intelligence?Cyber threat intelligence (CTI) is information about malicious cyber actors, their tactics, techniques, and procedures (TTPs), and the associated malicious tools and infrastructure used to carry out cyber attacks. It is used to inform organizations about the potential threats they may face, and the associated risks, so that they can take the necessary steps to protect their networks and systems. CTI can provide insight into the motivations and intentions of malicious actors, their capabilities, and any vulnerabilities they may exploit. It can also help organizations detect malicious activity and respond to incidents more quickly. Furthermore, CTI can be used to develop proactive strategies to mitigate risks and prevent future attacks.
To learn more about cyber threat intelligence
https://brainly.com/question/29677132
#SPJ4
Which of the following are features of the Windows taskbar component? (Select two.)
Can be moved to the left or left-centered on the screen.
Displays breadcrumb navigation when accessing components.
Can be hidden.
Includes a search field for quick location of applications.
Provides options to personalize your news feed and interests.
Answer:
CAN BE HIDDEN
Includes a search field for quick location of applications.
Explanation:
How to fix "failed to convert value of type 'java.lang.string' to required type 'java.time.localdate'; nested exception is org.springframework.core.convert"?
This error is due to the Spring framework being unable to convert a String value to the required type of LocalDate.
How can Java convert a String into a LocalDateTime?The static LocalDateTime can be used to construct a LocalDateTime object from a string. parse() technique. As a parameter, it accepts a DateTimeFormatter and a string. The date/time pattern is specified by using the DateTimeFormatter.
String data is what?A string is typically implemented as an array data structure of bytes (or words) that stores a sequence of elements, typically characters, using some character encoding. A string is generally regarded as a data type. String may also refer to more general arrays or other data structures and sequence (or list) data types.
Learn more about string value:
brainly.com/question/7143302
#SPJ4
which of the following can be used to replace /* missing constructor */ so that the object t is correctly created?
The three primary linters have contained this warning in two different formats. It was initially included in JSLint's initial release and has since been added to the other two tools.
Missing "a" is the generic error message displayed by JSLint.
Why do I get this error?To show a lack of tradition, this mistake is brought up. If you ignore this problem, your code will run without a hitch, but you risk going against coding standards and best practises. New expressions do not need to be accompanied by a pair of parentheses, as the ECMAScript 5 specification reveals (in a perplexing fashion). According to ES5 11.2, parentheses are only necessary when passing arguments to the function Object() { [native code] }:Members:... new MembersExpression Arguments
Expression: MemberExpression new NewExpression
Arguments: ( ( ArgumentList )
The above demonstrates that the Arguments nonterminal is optional, despite the somewhat ambiguous grammar. The function Object() { [native code] } can be omitted if you do not need to supply any arguments to it. To be consistent and to make it crystal clear that an invocation is being made, many style manuals, however, advise including parenthesis at all times.The expression will evaluate to a reference to the function rather than its return value if the parentheses are missing from a regular (non-constructor) function invocation. Your code may be less self-explanatory if you omit the parenthesis on a function Object() { [native code] } call.To Learn more About primary linters refer TO:
https://brainly.com/question/1202004
#SPJ4
How to return a value if a given value exists in a certain range in Excel?
You can use the IF and AND functions to check if a value exists in a certain range and return a value if it does exist. The syntax for this formula would be:
=IF(AND(value>=range_start, value<=range_end), return_value, 0)
A function is a named sequence of statements that performs a task. It can take inputs, process them, and return a result. Functions are a fundamental building block of programming, as they allow code to be reused and organized into logical blocks. They also provide a way to separate complex tasks into manageable chunks.
In this formula, value is the value you want to check, range_start and range_end are the start and end points of the range you are checking, and return_value is what you want to return if the value exists in the given range.
To learn more about functions
https://brainly.com/question/30220794
#SPJ4
A data analyst in a human resources department is working with the following selection of a spreadsheet:
CONCATENATE is the function used to generate the ID number in row 5.
What is CONCATENATE function?Microsoft Excel's CONCATENATE function allows you to join or combine the values of multiple cells. The CONCATENATE function can also combine a cell's value and text.Since the row 5 value 20093208 contains the year hired 2009 and the final 4 digits of the social security number 3208, the CONCATENATE function is as follows:=CONCATENATE(A5,B5)
The cell or text is separated with the symbol ",". While the symbol ";" is used in other versions of Microsoft Excel, the symbols "+," "*," or "!" are never used as separators.The Complete Question is CONCATENATE.
To Learn more About CONCATENATE, refer TO:
https://brainly.com/question/16185207
#SPJ4
pdas such as iphones use touchscreen technology. 2. presentation software can produce spreadsheets for demonstrations. 3. the most common word-processing program is microsoft word. 4. an abbreviation for wireless fidelity is wi-fi. 5. most small businesses use the accounting software called oracle.
1. Yes, iPhones and other PDAs use touchscreen technology, which allows users to interact with the device by touching the screen.
What is technology?Technology is the application of scientific knowledge for practical purposes, especially in industry. It is the collection of techniques, skills, methods, and processes used in the production of goods or services or in the accomplishment of objectives, such as scientific investigation. Technology can be the knowledge of techniques, processes, and the like, or it can be embedded in machines, computers, devices, and factories, which can be operated by individuals without detailed knowledge of the workings of such things.
2. Yes, presentation software such as Microsoft PowerPoint and Apple Keynote can produce spreadsheets to be used in a presentation.
3. Yes, the most common word-processing program is Microsoft Word. It is used by many businesses and individuals for creating and editing text documents.
4. Yes, Wi-Fi is an abbreviation for Wireless Fidelity, which is a technology for connecting to a wireless network.
5. Yes, many small businesses use Oracle, a popular accounting software. It is used for managing finances, creating invoices, and tracking inventory.
To learn more about technology
https://brainly.com/question/4903788
#SPJ4
which of the following is not one of the six steps of crisp-dm process? A. data understanding B. evaluation deployment C. data execution
Data Execution is not one of the six steps of CRISP-DM Process. The CRISP-DM Process consists of the following six steps: Business Understanding, Data Understanding, Data Preparation, Modeling, Evaluation, and Deployment.
What is Data Execution?Data Execution is the process of executing a computer program or algorithm that is stored in a computer's memory. This involves running the program's instructions and retrieving data from the memory to be used in calculations. Data Execution also involves storing the results of the calculations back into memory. This process is necessary in order for the computer to carry out its tasks efficiently and accurately. Data Execution is a key element of computer programming, as it is responsible for the actual execution of a program's code and commands. Without it, a computer would not be able to perform any tasks.
To learn more about Data Execution
https://brainly.com/question/29220726
#SPJ4
question 1 based on what you have learned in this course, spreadsheets are digital worksheets that enable data analysts to do which of the following tasks? select all that apply.
You have learned in this course, spreadsheets are digital worksheets that enable data analysts to do of the following tasks: analyze large amounts of data, create charts and graphs, perform calculations.
What is spreadsheets?
A spreadsheet is a type of software used to store and manipulate data. It consists of cells organized into columns and rows and can include formulas to link cells and perform calculations. Spreadsheets are used in a variety of applications such as budgeting, accounting, data analysis, and other financial tasks. Spreadsheets are often used to create graphical representations of data, such as charts and graphs. Spreadsheets can also contain macros, which are commands that allow users to automate tasks and make complex calculations easier. Spreadsheets are versatile and efficient tools for organizing, analyzing, and presenting data.
To learn more about spreadsheets
https://brainly.com/question/28609285
#SPJ4
In order to find out how much box office revenue each genre earned, you would use the sum function in the values menu to summarize the data. T/F?
It's False. The sum function in the values menu is used to add up the values in a column of data. To find out how much box office revenue each genre earned, you would need to group the data by genre and then use the sum function on the box office revenue column within each group.
This would give you a total for each genre. The syntax for the SUM function is typically "=SUM(range of cells)" where the "range of cells" is replaced with the specific cells or column that you want to add up. For example, if you have a column of numbers in cells A1 to A10, you could use the formula "=SUM(A1:A10)" in a cell to add up the values in that column and return the total. The SUM function can also take multiple ranges separated by commas which would add all the ranges together.
Learn more about the sum function, here https://brainly.com/question/21846827
#SPJ4
You need to install Windows 11 on a new computer system that uses a SATA SSD device to store data.
Which of the following is the BEST method for installing Windows 11 on this system?
O Set the SATA configuration in the UEFI firmware to RAID.
O Install Windows the same way you would install a system that uses a standard hard disk drive.
O Add a standard hard disk to the system and install Windows on the disk instead of the SSD device.
O Load the drivers for the SSD device during the initial phase of the Windows installation.
The easiest way to install Windows 11 on this system that utilizes a sata SSD device to store data is to do so similarly to how you would install Windows on a system that uses a regular hard drive.
With an SSD, programs load more quickly, the operating system of the device boots up faster, and files may be saved more quickly. In contrast, an SSD has no moving parts that might break or spin up and down. An SSD's two most important components are the flash controller and NAND flash memory chips.
How can I get Windows 11 the most effectively?Users can download Windows 11 in the same way they would any new Windows update. simply select Windows from Settings > Update & Security.
To know more about install Windows visit:-
https://brainly.com/question/30225112
#SPJ4
A company decided to install a new type of database software to keep track of inventory. The information systems staff was responsible for backing up all inventory data prior to installing the new software. Which of the following types of technology risks is being addressed in this scenario? O Misusing data O Updating systems O Technology usage O Corrupting data
Information systems utilise data from computer databases to provide the necessary information. A database is a structured collection of connected data that reflects a key part of a company's operations.
What is the process of data management?The collection, processing, validation, and storage of data are only a few of the many jobs and processes that make up the data management process.
Which of the following computer programmes creates, manages, and runs databases?Users can maintain databases with ease thanks to a tool called a database management system (DBMS).. It enables users to view and interact with the database's underlying data.
To know more about databases visit:-
https://brainly.com/question/6447559
#SPJ4
