The electromagnetic wave used in nuclear research and mineral exploration are gamma rays.
Electromagnetic waves refer to those rays that are found in the electromagnetic spectrum. They are collectively called light. Electromagnetic waves are used for different purposes.
Gamma rays are useful in nuclear research especially in identifying decaying radionuclides. Also, gamma rays are used for geologic mapping, mineral exploration, and identification of environmental contamination.
Learn more: https://brainly.com/question/17638582
what is refraction?
this my in sta id-:akhilrawat9453
Answer:
refers to the bending of light
the fact or phenomenon of light, radio waves, etc. being deflected in passing obliquely through the interface between one medium and another or through a medium of varying density.
Help ! will give Brainliest to who Answer first.
Acceleration is a ______ quantity.
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct statement is ~
Acceleration is a vector quantity.
Answer:
Acceleration is a vector quantity.
Which wave has the highest frequency?
Answer:its E
Explanation:
a person weighing 500 N climbs 3 m how much power. is needed to make the climb in 5 s?
Answer:
300watts
Explanation:
Answer:
300 watts
lol hoped this helped
:)
which statement about moist air moving over a mountain is correct?
Answer:
Explanation:
The orographic effect occurs when air masses are forced to flow over high topography. As air rises over mountains, it cools and water vapor condenses. As a result, it is common for rain to be concentrated on the windward side of mountains, and for rainfall to increase with elevation in the direction of storm tracks.
What is thermal energy.
Explanation:
thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat the flow of thermal energy
How can you cause a cart moving to the right at a constant speed to move to the left at a constant speed.
Answer:
The answer is below hoped it helped
Explanation:
Forces, when unbalanced, cause objects to accelerate. And the direction of the acceleration is the same as the direction of the extra force. Just because an object is moving to the right does not mean there is more right force than left force. Whether the right or the left force is bigger depends on whether the object is speeding up or slowing down. There must be more right force than left force if an object is moving to the right and speeding up. There must be more left force than right force if an object is moving to the right and slowing down.
what is the name of the spot where man first walked on the moon
Answer:
the tranquility base
Explanation:
How fast is an object going if it travels from San Diego to Anaheim in 1.25 hours (hr)? The distance from San Diego to Anaheim is 93 miles (mi).
a) 74.4 mi/hr
b) 116.25 mi/hr
c) 0.013 mi/hr
d) 84.25 mi/hr
e) None of the answers
Answer:
74.4 mph
Explanation:
Since we have the distance in miles and the time it took in hours, we can divide the two to get miles per hour.
speed = mi/hr
speed = 93/1.25
speed = 74.4 mph
Mxcbccbhf chucklingbdbfbfndbfnf
Answer:
4 seconds
Explanation:
On the Y axis - you go to 12. Go directly horizontally till you hit the line. Then go directly down. If you do this correctly, you should hit 4 seconds on the X axis.
What type of machine is used to measure the location of an earthquake epicenter.
Answer:
Seismometer
Explanation:
Seismometer measures Earth quake epicenter while seismograph measures Earth quake size
Evidence of liquid water in mars' distant past suggests that it had a substantial atmosphere compared to what it has presently. What happened to its water vapor?.
Answer:
The atmosphere has frozen out into the polar ice caps and permafrost as Mars has cooled.
Explanation: Good luck box BrokenTag27
Calculate the weight of a 2kg chicken on earth. .. (use the formulas)
Answer:
weight =m x g =2kg × 10m/s 2 = 20N
Formulas:
weight = m × gravity
=unit for weight is newtons
Mass=weight ÷ gravity
= unit for mass is kilograms
Gravity=weight ÷ mass
=unit for gravity is 10m/sec 2
Historia de baloncesto internacional resumen
Answer:
?
Explanation:
Around the time that _______ burning finishes, the inert core of ________ in very massive stars will collapse and the star will explode as a supernova.
The Sun can explode in a supernova. Around the time that sun (massive star) burning finishes, the inert core of Iron in very massive stars will collapse and the star will explode as a supernova.
When the sun explode, their inert iron cores often collapse into an extremely dense neutron star.
In a massive star, hydrogen fusion in the core is accompanied by other different fusion reactions involving heavier elements.
When the core of a massive star dies during a supernova, The supergiant will explodes as a supernova.
Learn more from
https://brainly.com/question/18179049
What is the best reference point for the car that is not in motion
Answer:
A reference point is a place or object used for comparison to determine if something is in motion. An object is in motion if it changes position relative to a reference point.
Explanation:
How long would it take a 500 w electric motor to do 150,000 j of work
Explanation:
300 second = 5 minutes
details
500 watts = 500 joules per second
Time = (1.50 x 10^5 joules)/(5 x 10^2 joules per second) = .3 x 10^3 seconds =300 second
A spring has a spring constant of 150N/m
Calculate:
The mass in grams which must be hung from the spring in order to extend it by 0.1 m
Answer:
15N
Explanation:
mass=w/g 150N/m×0.1m
Ans=15N
Answer:
Both springs have a constant of 25Nm and the block is motionless. If the bottom spring is compressed 0.4m past its equilibrium and the block has a mass of 3kg, how far is the top spring stretched past its equilibrium?
g=10ms2
Possible Answers:
1.0m
0.8m
0.2m
0.4m
0.6m
Correct answer:
0.8m
Explanation:
Since the block is motionless, we know that our forces will cancel out:
Fnet=0
There are three forces in play: one from each spring, as well as the force of gravity. If we assume that forces pointing up are positive, we can write:
Fspring,top+Fspring,bot−mg=0
Plugging in expressions for each spring force, we get:
kxtop+kxbot−mg=0
Rearring for the displacement of the top spring, we get:
xtop=mg−kxbotk=(3kg)(10ms2)−(25Nm)(0.4m)25Nm
xtop=30N−10N25Nm=0.8m
if the magntidude of the sum and difference of two non zero vectors A and B is equal. what can we say about the two vectors
Answer:
A + B = B - A
The above equation must hold for the sum and difference to be zero.
How can one of the vectors not be zero?????
Define displacement in your own word
Answer:
Displacement is a vector quantity that refers to "how far out of place an object is"; it is the object's overall change in position.
Explanation:
Which is the force that results from use of a machine?
O a. input force
Oc. input work
Ob. output force
Od. output work
Answer:
D. Output force
Explanation:
The input force is the effort used to run the machine and this results in an output force.
dark energy has been hypothesized to solve which problem?
Answer:
The expansion of the universe is accelerating.
Explanation:
How does the diameter of a black hole (size of the event horizon) depend on the mass inside the black hole
Answer:
The greater the mass, the greater is the diameter
Explanation:
The greater the mass, the greater is the diameter. almost all galaxies contain supermassive black holes.
An astronomer discovers a massive galaxy which has four nuclei. What is a likely explanation for a galaxy having more than one nucleus
The universe is made of a lot of galaxies. The likely explanation for a galaxy having more than one nucleus is that the galaxy must have swallowed several smaller galaxies that were its neighbors.
There are some reason behind the theory that the eating up of a galaxy is by another galaxy. The galaxy is said to have a powerful past due to the fact that a lot of smaller galaxies were eaten up.The universe is known to have a very largest galaxy called the giant elliptical galaxy that is made up of about a trillion stars.
Learn more from
https://brainly.com/question/22885678
No links plz!!
Why can't we observe the image of a distant object in a concave mirror, but we can observe in a convex mirror? Both images are diminished.
Answer:
Light
Explanation:
The way a concave mirror works is that since it's concave, the light bounces off of each other. a convex mirror, it curved the opposite, and the mirror has no way to bounce off of itself.
150 J of work is done on a closed system, and 270 J of heat is added to the system. Does the internal energy of the system increase, decrease, or stay the same? If the internal energy changes, state the change in energy.
The change in the internal energy of the system will increase.
The given parameters;
work on the system, w = 150 Jheat added to the system, Q = 270 JThe change in the internal energy of the system is calculated by applying first law of thermodynamics as follows;
ΔU = Q + w
where;
ΔU is the change in the internal energyΔU = 150 J + 270 J
ΔU = 420 J
Thus, the change in the internal energy of the system increases.
Learn more here:https://brainly.com/question/16148588
A ball is thrown from ground level at an angle of 0 and the initial velocity components are 7.5m/s and 13m/s. Ignoring air resistance, calculate each of:
1- The initial velocity is vi
2- The value of the angle at which the ball was thrown
3 - The horizontal range of the ball R
I assume you mean an angle of θ, and not 0. I also assume the given components of the initial velocity are horizontal and vertical, respectively, so that
1. the initial velocity vector is
[tex]\boxed{\vec v_i = (7.5\,\vec\imath + 13\,\vec\jmath) \dfrac{\rm m}{\rm s}}[/tex]
which means the ball is thrown with an initial speed of
√((7.5 m/s)² + (13 m/s)²) ≈ 15 m/s,
and
2. the angle made by [tex]\vec v_i[/tex] with the positive horizontal axis is θ such that
[tex]\tan(\theta) = \dfrac{13}{7.5} \implies \theta \approx \arctan(1.7) \approx \boxed{60^\circ}[/tex]
3. At time t, the ball attains a height y and horizontal range x according to
y = (13 m/s) t - g/2 t²
x = (7.5 m/s) t
where g = 9.8 m/s². When the ball reaches the ground (y = 0) for t > 0, we have
(13 m/s) t - g/2 t² = 0
13 m/s - g/2 t = 0
t = 2 (13 m/s)/g = (26 m/s)/g
Plugging this time into the x equation gives a horizontal range of
x = (7.5 m/s) (26 m/s)/g ≈ 20. m
Help, please. I am not sure what to do.
Answer:
option D) -3m
Explanation:
if 6m is diplaced by -3m then it would be -3+6=3m
feel free to ask if you are confused
In an exothermic reaction, energy is
the surroundings.
In an endothermic reaction, energy is
the surroundings.
Trick to identify:-
Exothermic reaction has +∆H sign on product sideEndothermic reaction has -∆H sign on product side or +∆H sign on reactant sideAnswer:
In an exothermic reaction, energy is
✔ released to
the surroundings.
In an endothermic reaction, energy is
✔ absorbed from
the surroundings.
Explanation:
when light enters water, it bends. what does the amount of bending depend on?
Answer:
the change of speed!
Explanation:
if light speeds up or slow down more it bend more
