Gravitational waves have never been directly observed, but there is a wealth of indirect evidence to support their existence.
What is Gravitational wave?Gravitational waves are ripples in the fabric of space-time caused by some of the most violent and energetic processes in the Universe. These waves are generated when two massive objects, such as black holes or neutron stars, interact and collide. They travel through the Universe at the speed of light, carrying information about their origins and about the nature of gravity that cannot be obtained from any other type of observation.
One of the most compelling pieces of evidence is the orbital decay of binary pulsar systems. A binary pulsar system is a pair of neutron stars that are orbiting each other. If gravitational waves exist, they should be causing a loss of energy in the system, leading to the binary stars slowly spiraling in toward each other.
In the 1970s, astronomers discovered a binary pulsar system that was doing exactly this. Over a 35-year period, the orbital period of the system decreased by about 7.7 milliseconds, which is exactly what would be expected if gravitational waves were carrying away energy from the system.
Other pieces of evidence come from the cosmic microwave background radiation, which is a remnant of the Big Bang. This radiation should have anisotropies that are caused by the distortions of space-time due to gravitational waves. This anisotropy has been observed, providing additional evidence for the existence of gravitational waves.
To learn more about Gravitational wave
https://brainly.com/question/13045752
#SPJ4
Factors that affect the acceleration of an object include the.
Answer:
Explanation: Factors that affect the acceleration of an object include the force of an object and mass of an object and velocity of an object
4.0 loops exist in a string of length 1.2 m vibrating at a frequency of 160 hz. what is the wavelength? group of answer choices 0.60 m 4.8 m 1.2 m 45 m
The wavelength of the string is 0.75 meters. Therefore, the answer closest to this value is 0.60 m, which is the correct answer.
The formula to calculate wavelength is: wavelength = speed of wave / frequency. The speed of a wave on a string is given by the equation: speed = square root of (tension / linear mass density). Linear mass density is the mass of the string per unit length. The tension is the force that stretches the string. The linear mass density of the string can be calculated by dividing the total mass of the string by its length.
Using the given values, we can calculate the tension: tension = (4 * frequency^2) * linear mass density * length. Plugging in the values, we get: tension = (4 * 160^2) * (0.00025 kg/m) * 1.2 m = 61.44 N.
The linear mass density can be calculated by dividing the total mass of the string by its length. Let's assume the mass of the string is 0.05 kg. Then, the linear mass density would be: linear mass density = 0.05 kg / 1.2 m = 0.00025 kg/m.
Now, we can calculate the speed of the wave: speed = square root of (61.44 N / 0.00025 kg/m) = 560.23 m/s.
Finally, we can calculate the wavelength: wavelength = speed / frequency = 560.23 m/s / 160 Hz = 0.75 meters.
To know more about wavelength, visit;
https://brainly.com/question/10750459
#SPJ11
When lighted, a 100-watt light bulb operating on a 110-volt household circuit has a resistance closes to:
A) 10^-2 ohms
B) 10^-1 ohms
C) 10 ohms
D) 100 ohms
The answer is D) 100 ohms.
To calculate the resistance of a light bulb, we can use Ohm's law:
Resistance (R) = Voltage (V) / Current (I)
We know that the power (P) of the light bulb is 100 watts and the voltage (V) is 110 volts. We can use the formula:
Power (P) = Voltage (V) x Current (I)
to solve for the current:
Current (I) = Power (P) / Voltage (V) = 100/110 = 0.909 A
Now we can use Ohm's law to calculate the resistance:
Resistance (R) = Voltage (V) / Current (I) = 110 / 0.909 = 121 ohms
Therefore, the 100-watt light bulb operating on a 110-volt household circuit has a resistance closest to 100 ohms.
Hi there! To answer your question, let's use the formula for power (P): P = V^2 / R, where V is voltage and R is resistance.
You have a 100-watt light bulb operating on a 110-volt household circuit. So, P = 100 watts and V = 110 volts.
100 = (110)^2 / R
Now, we'll solve for R:
R = (110)^2 / 100
R ≈ 12100 / 100
R ≈ 121 ohms
None of the options A, B, C, or D match the result. There might be a mistake in the options provided. Based on the calculations, the resistance should be approximately 121 ohms.
To know more about ohms click this link -
brainly.com/question/29750972
#SPJ11
A researcher wants to determine if ponds and lakes downwind of a coal-burning power plant are affected by the plant’s emissions. Which of the following would be the best parameter from the water in the ponds and lakes to measure in order to determine the effect of the plant’s emissions on the aquatic ecosystems?.
The best parameter to measure the effect of the coal-burning power plant's emissions on the aquatic ecosystems in ponds and lakes downwind would be the acidity (pH levels) of the water.
Coal-burning power plants release sulfur dioxide and nitrogen oxide emissions into the atmosphere. When these emissions mix with water vapor, they form acidic compounds that can fall as acid rain. Acid rain can significantly affect aquatic ecosystems by lowering the pH of water bodies, making the water more acidic. This change in acidity can harm aquatic plants and animals, disrupting the balance of the ecosystem.
By measuring the acidity (pH levels) of the water in the ponds and lakes downwind of the coal-burning power plant, the researcher can determine the effect of the plant's emissions on the aquatic ecosystems.
To know more about pH levels, click here
https://brainly.com/question/1458045
#SPJ11
because of a physical disability, keisha is unable to physically duplicate the actions of an ice skating instructor. which of the following processes keep her from being able to observationally learn how to ice skate?
Keisha's physical disability prevents her from being able to observationally learn how to ice skate. Her inability to physically replicate the movements of an instructor is a significant limitation in her ability to acquire new skills through observation.
1. Observational learning, also known as social learning, is the process of acquiring new behaviors or skills by watching and imitating others. It involves the use of mirror neurons in the brain, which allow an individual to observe the actions of others and then reproduce them. However, in the case of Keisha, her physical disability keeps her from being able to observationally learn how to ice skate.
2. Her disability prevents her from physically duplicating the actions of an ice skating instructor, which is essential in observational learning. For example, if the instructor demonstrates how to do a triple axel, Keisha would not be able to physically replicate the movement due to her physical disability. This inability to imitate the movements of the instructor means that she cannot learn by observing others, which is a significant limitation for her.
3. Moreover, Keisha's inability to replicate the movements of the instructor may also affect her motivation to learn how to ice skate. If she sees others effortlessly performing the moves she cannot do, she may become discouraged and lose motivation to continue trying. This could potentially lead to frustration and further inhibit her ability to learn.
In conclusion, Keisha's physical disability prevents her from being able to observationally learn how to ice skate. Her inability to physically replicate the movements of an instructor is a significant limitation in her ability to acquire new skills through observation.
To know more about physical disability, refer
https://brainly.com/question/29548949
#SPJ11
A skateboarder rolls 25.0 m down a hill that descends at an angle of 20.0 degrees with the horizontal. Find the horizontal and vertical components of the skate boarder's displacement.
The horizontal component of the skateboarder's displacement is 24.8 m and the vertical component of the skateboarder's displacement is 8.94 m.
What is displacement?Displacement is a vector quantity that describes the distance and direction of an object's change in position. It is the measurement of how far an object has moved from its original point of reference. Displacement is calculated by subtracting the initial position from the final position. It is important to note that displacement is not the same as distance.
Horizontal component:
The horizontal component of the skateboarder's displacement can be found using the equation:
H = D x cos(θ)
where H is the horizontal component, D is the magnitude of the displacement, and θ is the angle with the horizontal.
Therefore, the horizontal component of the skateboarder's displacement is:
H = 25.0 m x cos(20.0°) = 24.8 m
Vertical component:
The vertical component of the skateboarder's displacement can be found using the equation:
V = D x sin(θ)
where V is the vertical component, D is the magnitude of the displacement, and θ is the angle with the horizontal.
Therefore, the vertical component of the skateboarder's displacement is:
V = 25.0 m x sin(20.0°) = 8.94 m.
To learn more about displacement
https://brainly.com/question/14422259
#SPJ4
the superposition of two waves travelling in the same medium produces a standing wave pattern if the two waves have
When two waves with the same frequency, wavelength, and amplitude propagate through the same medium, they can undergo a phenomenon known as wave interference.
Wave interference occurs when waves interact with each other, resulting in their amplitudes adding or canceling out at specific points in space.
If two waves with the same frequency, wavelength, and amplitude are traveling in the same medium and in opposite directions, they can form a standing wave pattern.
A standing wave is a pattern that appears to be stationary, with points of maximum and minimum amplitude occurring at specific locations along the medium.
The formation of a standing wave pattern is a result of constructive and destructive interference between the two waves. When the crests of one wave align with the crests of the other wave, constructive interference occurs, resulting in regions of increased amplitude called antinodes.
Conversely, when the crests of one wave align with the troughs of the other wave, destructive interference occurs, causing regions of decreased or zero amplitude called nodes.
In a standing wave pattern, the nodes and antinodes are stationary and do not move along the medium. The distance between two adjacent nodes or antinodes is half of the wavelength of the waves involved.
This is because at the nodes, the waves destructively interfere and cancel each other out, resulting in zero amplitude, while at the antinodes, the waves constructively interfere and reinforce each other, leading to maximum amplitude.
Standing waves have important applications in various fields, such as musical instruments, acoustics, and electromagnetic waves. For example, the production of sound in musical instruments relies on the formation of standing waves in vibrating strings, air columns, or membranes.
These standing waves create distinct patterns of nodes and antinodes, which determine the specific frequencies, or musical notes, produced by the instrument.
To learn more about amplitude, refer below:
https://brainly.com/question/8662436
#SPJ11
the superposition of two waves travelling in the same medium produces a standing wave pattern if the two waves have the same frequency, wavelength, and amplitude.
Knowing that the speed of light in the vitreous humor is 2.1 × 108 m/s, what is the index of refraction of the vitreous humor? (Note: The speed of light in a vacuum is 3.0 × 108 m/s.)
A) 0.7
B) 1.4
C) 2.1
D) 3.0
Knowing that the speed of light in the vitreous humor is 2.1 × 10⁸ m/s, 1.4 is the index of refraction of the vitreous humor.
What is the meaning of the index of refraction?
The relative speed of light in various mediums is quantified by the refractive index. The ability to recognize the direction in which the light would bend when moving from one medium to another is made possible by knowledge of the refractive indices of various media. Refraction is the term for the bending of light as it passes through transparent materials (it also occurs with sound, water, and other waves). We are able to create lenses, magnifying glasses, prisms, and rainbows because to this bending caused by refraction.
Index of refraction = speed of light in vacuum/speed of light in the medium
The speed of light in a vacuum is 3.0 × 10⁸ m/s.
The speed of light in the vitreous humor is 2.1 × 10⁸ m/s
Index of refraction = 3.0 × 10⁸ m/s/2.1 × 10⁸ m/s
Index of refraction = 1.4
To learn more about Refraction use:
https://brainly.com/question/27932095
#SPJ4
How would the phases of the moon change if the moon was twice as far away from the earth as it is now? (choose all that apply) Group of answer choices The time between full moons would be longer. The time spent in the full phase would be longer. There would be no crescent phases. The time between new moons would be shorter.
The time between full moons would be longer if the moon was twice as far away from the earth as it is now
Describe moon.
Because no one was aware that there were any other moons until Galileo Galilei discovered four moons orbiting Jupiter in 1610, Earth's only natural satellite is simply referred to as "the Moon." The word for the Moon in Latin is Luna, which also serves as the primary adjective for all things lunar.
The duration between full moons would lengthen if the moon were twice as far away from the Earth because it would take it longer for one orbit to be completed. As a result, there would be more time between two full moons that occurred quickly after one another.
To learn more about moon use:
https://brainly.com/question/27303153
#SPJ4
A straight 2.90 m wire carries a typical household current of 1.50 A (in one direction) at a location where the earth's magnetic field is 0.550 gauss from south to north.
Part A
Find the direction of the force that our planet's magnetic field exerts on this cord if is oriented so that the current in it is running from west to east.
Answer choices:
a.) The force is directed upward
b.) The force is directed downward
c.) There is no force extering on the wire.
d.) The force is directed from east to west.
Answer:
a)
Explanation:
Using Fleming's Left-Hand Rule
An immersion heater of resistance R converts electrical energy into thermal energy that is transferred to the liquid in which the heater is immersed. If the current in the heater is I, the thermal energy transferred to the liquid in time t is:
A) IRt
B) I^2Rt
C) IRt^2
D) IR/t
The answer is B) I^2Rt. This is because the thermal energy transferred is proportional to the square of the current (I^2) and the resistance (R), and the time (t) for which the current flows.
To explain further, the power (P) dissipated by an electrical device can be calculated using the formula P = IV, where I is the current and V is the voltage across the device. For an immersion heater, the voltage is typically constant, so we can write P = VI.
Using Ohm's Law, we can substitute V = IR, giving P = I^2R. This is the power dissipated by the heater, which is also the rate at which thermal energy is transferred to the liquid. Therefore, the thermal energy transferred in time t is P*t = I^2Rt, which is option B.
In summary, the thermal energy transferred by an immersion heater is proportional to the square of the current, the resistance, and the time for which the current flows, and can be calculated using the formula I^2Rt.
Learn more about resistance here:
https://brainly.com/question/30799966
#SPJ11
An object near the surface of the planet falls freely from rest and reaches a speed of 12. 0 meters per second after it has fallen 14. 4 meters. What is the acceleration due to gravity on the planet?.
An object falling freely near the surface of a planet experiences gravitational acceleration. The acceleration due to gravity on this planet is 5 m/s².
In this case, the object starts from rest and reaches a speed of 12.0 meters per second after falling 14.4 meters. To determine the acceleration due to gravity, we can use the following kinematic equation:
v² = u² + 2as
Here, v is the final velocity (12.0 m/s), u is the initial velocity (0 m/s, as the object is at rest), a is the acceleration due to gravity, and s is the displacement (14.4 m).
Substituting the values, we get:
(12.0 m/s)² = (0 m/s)² + 2a * (14.4 m)
144 = 0 + 28.8a
Now, solve for a:
a = 144 / 28.8 = 5 m/s²
Therefore, the acceleration due to gravity on this planet is 5 m/s².
Learn more about acceleration due to gravity here:
https://brainly.com/question/12792214
#SPJ11
A car is traveling in a counterclockwise circle. At the moment the car is at the north end of the circle, it is slowing down. At the same moment, the acceleration vector points to the
At the moment the car is at the north end of the circle and slowing down, the acceleration vector points to the south.
When an object moves in a circular path at a constant speed, it is still accelerating because its direction is changing. This acceleration is called centripetal acceleration and it always points towards the center of the circle. When the car is slowing down at the north end of the circle, its velocity vector is still pointing towards the east or west direction (tangent to the circle). Therefore, the acceleration vector must be pointing towards the center of the circle, which is south of the car. This is because the centripetal acceleration vector always points towards the center of the circle and is perpendicular to the velocity vector.
To learn more about acceleration:
https://brainly.com/question/30660316
#SPJ11
atomic particles are often characterized by their kinetic energy in mev. what is the speed of a 6.0 mev proton?
Therefore, the speed of a 6.0 MeV kinetic energy proton is about 0.237 times the speed of light, or approximately 70,946,208 m/s.
To find the speed of a 6.0 MeV proton, we can use the relativistic energy-momentum equation:
E² = (pc)² + (mc²)²
where E is the total energy of the proton, p is its momentum, m is its rest mass, and c is the speed of light.
We can solve for the momentum p:
p = √[(E² - (mc²)²)/c²]
The rest mass of a proton is approximately 938 MeV/c².
Substituting E = 6.0 MeV and m = 938 MeV/c², we get:
p = √[((6.0 MeV)² - (938 MeV/c²)²)/c²] = 2.43 MeV/c
The speed of the proton can be calculated using the momentum and the relativistic expression for kinetic energy:
K = (pc)² / (2m) / (1 + (pc)²/(mc²))*0.5
Substituting the values we obtained, we get:
K = [(2.43 MeV/c) * c]² / (2 * 938 MeV/c²) / (1 + [(2.43 MeV/c) * c]²/(938 MeV/c²))*0.5
K = 2.14 MeV
Finally, we can use the classical expression for kinetic energy to find the speed:
K = 1/2 mv²
v = √(2K/m)
= √[(2 * 2.14 MeV)/(938 MeV/c²)] * c
v ≈ 0.237 c
where c is the speed of light.
To know more about kinetic energy,
https://brainly.com/question/26472013
#SPJ11
Pressure of 76cm of mercury column is _____ pa
The pressure of 76 cm of mercury column is approximately 101325 Pa.
Pressure is typically measured in units of pascals (Pa). However, in some cases, other units such as centimeters of mercury (cmHg) or millimeters of mercury (mmHg) may be used. To convert these units to pascals, we can use the conversion factor that 1 atm = 101325 Pa.
In the case of 76 cm of mercury column, we can use the conversion factor of 1 atm = 76 cmHg, which gives us:
1 atm = 76 cmHg
1 atm = 76 cmHg x 1/2.54 cm/in x 1 in/12 ft x 1 ft/0.3048 m x 1000 mm/m
1 atm = 101325 Pa
As a result, the pressure in a 76 cm mercury column is roughly 101325 Pa.
To know more about the Pressure, here
https://brainly.com/question/30935340
#SPJ1
a light fixture mounted 24 ft above the ground illuminates a cone of light with an angle of 44 at the top. what is the radius of the cicle of light on the ground
The radius of the circle of light on the ground is approximately 19.06 feet.
To solve this problem, we can use trigonometry. We know that the light fixture is 24 feet above the ground and the angle at the top of the cone is 44 degrees.
We can create a right triangle with the height being 24 feet, the angle between the height and the hypotenuse being 44 degrees, and the radius of the circle of light as the base of the triangle.
We can use the tangent function to solve for the radius (base) of the triangle:
tan(angle) = opposite side/adjacent side
In this case, the angle is 44 degrees, the opposite side is the radius (which we're trying to find), and the adjacent side is the height, 24 feet. Plugging in the given information, we get:
tan(44) = radius/24
To solve for the radius, multiply both sides by 24:
radius = 24 * tan(44)
Using a calculator to find the tangent of 44 degrees and then multiplying by 24, we get:
radius ≈ 19.06 feet
The radius of the circle of light on the ground is approximately 19.06 feet.
For more information on trigonometry kindly visit to
https://brainly.com/question/17081568
#SPJ11
a shift of only a few degrees fahrenheit in the average global temperature will likely result in more frequent and extreme heat waves. which of the following best describes this phenomenon?
Climate change is the long-term alteration of average global temperatures caused by increased emissions of greenhouse gases, such as carbon dioxide and methane, into the atmosphere.
What is atmosphere?Atmosphere is a layer of gases surrounding a planet or moon, and is held in place by gravity. It is composed of a mixture of nitrogen, oxygen, and other gases, and also contains water vapor, dust particles, and sometimes other trace elements. The atmosphere is essential for life on Earth, as it contains oxygen and shields us from the Sun's ultraviolet radiation. It also moderates temperatures, reduces the effects of wind, and helps to create weather patterns. In addition, the atmosphere helps to protect the Earth from meteorites, asteroids, and other space objects. The atmosphere is constantly changing, as gases and particles are released, trapped, and redistributed by the action of the Earth's atmosphere, land, and oceans.
This increase in global temperatures can lead to more frequent and extreme heat waves.
To learn more about atmosphere
https://brainly.com/question/1844421
#SPJ4
Complete Question:
3. A shift of only a few degrees Fahrenheit in the average global
temperature will likely result in more frequent and extreme heat waves.
Which of the following choices best describes this phenomenon?
A. habitat destruction
B. weather change
C. Climate change formation
D. Ozone
How does the dsinθ = nλ explain diffraction
The dsinθ = nλ equation is a mathematical expression of the phenomenon of diffraction, which is the bending of waves around small obstacles or through small openings.
What is phenomenon?A phenomenon is any event or circumstance that is observed and studied. It can be natural or man-made, and can occur on a small or large scale. Phenomena can be both physical and psychological, and can be studied in the natural and social sciences. Phenomena can be described as anything that is observable, measurable, and verifiable. Examples of phenomena include natural disasters, psychological disorders, economic trends, social movements, and anything else that can be observed and studied. Phenomenology is the study of phenomena, and seeks to understand the underlying causes and meanings of events, occurrences, and behaviors.
Diffraction occurs when a wave encounters an obstacle or opening that is comparable in size to its wavelength. The dsinθ = nλ equation states that the angle of diffraction (θ) is related to the wavelength of the wave (λ) and the number of wavelengths (n) between the source and the point of diffraction.
To learn more about phenomenon
https://brainly.com/question/28030896
#SPJ4
A 8-kg block is set moving with an initial speed of 6 m/s on a rough horizontal surface. If the force of friction is 12 n, approximately how far does the block travel before it stops?.
Answer: 15 meters (approx)
Explanation:
The force of friction acting on the block is given as 12 N, and the initial velocity of the block is 6 m/s. We need to find the distance traveled by the block before it comes to rest.
The force of friction is given by the equation F_friction = friction coefficient * F_normal, where F_normal is the normal force exerted by the surface on the block. As the block is moving horizontally, the normal force is equal and opposite to the force of gravity acting on the block, which is given by F_gravity = m * g, where m is the mass of the block and g is the acceleration due to gravity (9.8 m/s^2).
Therefore, the force of friction can be calculated as F_friction = friction coefficient * m * g.
We can find the friction coefficient by dividing the force of friction by the normal force, which is given by F_normal = m * g. Therefore, friction coefficient = F_friction / F_normal = F_friction / (m * g).
Using the given values, we get friction coefficient = 12 N / (8 kg * 9.8 m/s^2) = 0.153.
Now we can use the equation of motion, v^2 = u^2 + 2as, to find the distance traveled by the block before it stops. Here, v = 0 m/s (final velocity), u = 6 m/s (initial velocity), a = -f/m (acceleration due to friction), and s is the distance traveled.
Therefore, s = (v^2 - u^2) / 2a = (0 - (6^2)) / (2 * (-0.153 * 9.8)) ≈ 15 meters.
Therefore, the block travels approximately 15 meters before it stops.
If the force of friction is 12 N approximately, then the block travel 12m before it stops.
To calculate the distance traveled by the block before it stops, we need to consider the work done against friction.
The work done against friction is equal to the force of friction multiplied by the distance traveled. The work-energy principle states that the work done on an object is equal to the change in its kinetic energy
according to the newton's law of motion :
[tex]ma=f_k[/tex]
[tex]m[/tex]= mass of the body
[tex]a[/tex]=acceleration due to gravity
[tex]f_k[/tex]=kinetic friction
put the values in above equation:
[tex]8\times a=12[/tex]
[tex]a=1.5[/tex] [tex]m/s^{2}[/tex]
according to the third equation of motion:
[tex]v^{2}=u^{2}-2as[/tex]
[tex]0^{2}=6^{2}-2\times 1.5\times s[/tex]
[tex]s = 12 m[/tex]
Therefore, the block travels approximately 12 meters before it stops.
Learn more about work here:
https://brainly.com/question/14813637
#SPJ2
Discuss the role that symmetry plays in the application of Gauss’s law. Give examples of continuous charge distributions in which Gauss’s law is useful and not useful in determining the electric field.
Gauss’s law states that the electric flux through any closed surface is equal to the total charge enclosed within that surface divided by the permittivity of free space.
What is electric flux?Electric flux is a measure of the total number of electric field lines passing through a given area. It is calculated by multiplying the magnitude of the electric field by the area it is passing through. Electric flux is a vector quantity, with the direction of the flux being the same as the direction of the electric field.
This law is particularly useful for calculating the electric field for charge distributions with certain symmetries. For example, for a spherically symmetric charge distribution, the flux through any closed spherical surface will be the same, meaning the electric field will be radial and proportional to the enclosed charge. This makes it easy to calculate the electric field in such cases.
On the other hand, Gauss’s law is not useful for calculating the electric field of charge distributions with no symmetry. For example, a continuous distribution of charge with no symmetry would not have a uniform electric field, since the flux would vary across different closed surfaces. In such cases, the electric field would have to be calculated using other methods such as Coulomb’s law or numerical integration.
To learn more about electric flux
https://brainly.com/question/26289097
#SPJ4
How is the evolution of a main-sequence stars with less than 0. 4 msun different from that of a main-sequence star with more than that mass?.
The evolution of a main-sequence star with less than 0.4 M☉ (solar masses) is different from that of a main-sequence star with more than that mass.
Main-sequence stars with less than 0.4 M☉ have a lower core temperature and a lower rate of nuclear fusion than more massive stars.
They burn their hydrogen fuel more slowly and can remain on the main sequence for much longer periods of time, up to trillions of years.
These stars are also smaller and dimmer than more massive stars, with surface temperatures ranging from 2,500 to 4,000 K.
As these low-mass stars exhaust their hydrogen fuel in the core, the core contracts and heats up, causing the outer layers of the star to expand and cool down.
The star will then enter the red giant phase, during which it will continue to burn hydrogen in a shell around the core. This phase can last for billions of years.
Eventually, the hydrogen fuel in the shell will become depleted, and the star will start to contract and heat up again. As the core temperature increases, helium burning will begin and the star will enter a new phase of evolution.
This phase is called the horizontal branch phase, during which the star will burn helium in its core.
To know more about solar masses refer here
brainly.com/question/3195950#
#SPJ11
which force(s) does not act on a stationary body? question 9 options: a. coriolis force b. centripetal force c. friction force d. gravity e. centripetal, friction, and coriolis forces
According to the question the options are e. centripetal, friction, and coriolis forces.
What is centripetal?Centripetal force is a force that acts on a body moving in a circular path and is directed toward the center of the circle. It is the force that keeps an object in circular motion, such as a satellite in orbit around a planet. The magnitude of the centripetal force depends on the speed of the object and the radius of the circle, and is equal to the product of the mass of the object and the square of its velocity, divided by the radius of the circle.
Centripetal force is a force that acts to keep an object moving in a circular path and is not applicable to an object at rest.
Friction force is the force that opposes the relative motion between two objects that are in contact with each other, and can only act on an object when it is moving.
The Coriolis force is the force generated by the Earth's rotation that causes a curved path for freely moving objects on the Earth's surface, and thus is not applicable to a stationary body.
To learn more about centripetal
https://brainly.com/question/20905151
#SPJ4
when an ice skater pulls in her initially outstretched arms while spinning on point, does she change her angular momentum
Yes, the ice skater changes her angular momentum when she pulls in her outstretched arms while spinning on point. Angular momentum is the product of moment of inertia and angular velocity, and is conserved in the absence of external torques.
When the ice skater pulls in her arms, she decreases her moment of inertia, which means that her angular velocity must increase in order to maintain conservation of angular momentum. This is because angular momentum is conserved when there is no net external torque acting on the system.
This phenomenon is known as the conservation of angular momentum, which states that the total angular momentum of a system remains constant in the absence of external torques. Therefore, as the ice skater pulls in her arms, she decreases her moment of inertia, which causes her angular velocity to increase in order to conserve her angular momentum. This makes her spin faster.
Learn more about “ angular momentum. “ visit here;
https://brainly.com/question/31138302
#SPJ4
Complete Question
When an ice skater pulls in her initially outstretched arms while spinning on point, does she change her angular momentum? If so, does it increase or decrease?
Hydrogen Atom: What is electric field value at the location of the Bohr radius?
What force does an electron experience at that location? What acceleration does
this result in? (Fnet= mv2/R). How much kinetic energy does this correspond to for
the electron
The electric field at the location of the Bohr radius (r = a0, where a0 is the Bohr radius) is equal to the Coulomb force divided by the charge of the electron, or F/e. This electric field is equal to 4πε0/e, where ε0 is the permittivity of free space.
What is electric?Electricity is a form of energy that comes from the movement of charged particles, such as electrons and protons. It is a dynamic force that powers many of our everyday tools and appliances, such as lights, televisions, computers, and more. It is a convenient, clean, and relatively inexpensive way to power the majority of our daily needs. Electricity is generated by various sources, such as coal, hydroelectric power, nuclear energy, wind, and solar energy.
The force experienced by the electron at the Bohr radius is therefore equal to the electric field times the charge of the electron, or (4πε0/e)e = 4πε0. This force causes the electron to accelerate at a rate of 4πε0/m, where m is the mass of the electron.
The acceleration results in a kinetic energy for the electron equal to (1/2)mv2. Plugging in the acceleration, we get (1/2)m(4πε0/m)2 = 2π2ε0m. This is the kinetic energy the electron will have at the Bohr radius.
To learn more about electric
https://brainly.com/question/26978411
#SPJ4
A fine metal foil separates one end of two pieces of optically flat glass, as in Figure 24-33 in the textbook. When light of wavelength 700nm is incident normally, 24 dark lines are observed (with one at each end). How thick is the foil?
When light of wavelength 700nm is incident normally, 24 dark lines are observed, the thickness of the foil is 16,800nm .
What is light ?Light is a form of energy that is both visible and invisible to the human eye. It is a form of electromagnetic radiation, consisting of waves that travel through a vacuum at the speed of 186,000 miles per second. Light can be made up of a variety of wavelengths, such as infrared, ultraviolet, and visible light. Visible light is composed of the colors of the rainbow, red, orange, yellow, green, blue, indigo, and violet. Light plays a vital role in photosynthesis, the process by which plants convert light energy into chemical energy.
The thickness of the foil can be calculated using the equation for the spacing between the dark lines in a diffraction pattern: d = λ/(2sin θ),where d is the spacing between lines, λ is the wavelength of light, and θis the angle of incidence. In this case, λ= 700nm and θ = 0° (since the light is incident normally to the foil). Thus, the spacing between lines d = 700nm/(2sin0°) = 700nm. Since there are 24 lines, the thickness of the foil is 24[tex]*[/tex]700nm = 16,800nm.
To learn more about light
https://brainly.com/question/104425
#SPJ4
A horizontal spring with a spring constant 100 N/m is compressed 20cm and used to launch a 2.5 kg box across a frictionless,horizontal surface. After the box travels some distance, thesurface becomes rough. The coefficient of kinetic friction of thebox on the surface is 0.15. Use work and energy to find how far thebox slides across the rough surface before stopping.
The coefficient of kinetic friction of the box on the surface is 0.15 , 0.544 m the box slides across the rough surface before stopping.
W = ΔKE [definition of work energy]
W = PE [the kinetic energy is given by the spring force.]
[tex]F_{f}[/tex] = .5kx² [The net work is done by friction. The term "elastic potential energy" is used here.]
μmgd = .5kx² [Definition of frictional work. Take note of Fn = mg, Newton's third law.]
d = kx² / 2μmg
Algebraically solve for d. At the point when know everything now. Convert to SI units and work out.]
d = 0.544 meters.
Kinetic energy :The energy an object has when it moves is called kinetic energy. To speed up an item, then, at that point, we should apply a power. We must perform work in order to apply force. Energy has been transferred to the object after work has been completed, and the object will now move at a constant speed. Any direction can be used to move it. We've seen that an increase in mass and/or speed results in an increase in kinetic energy (KE), but unless an object speeds up or slows down, KE stays the same.
Learn more about kinetic energy :
brainly.com/question/25959744
#SPJ4
in fort collins, colorado, the sun shines for an average of 1850 hours per year. a homeowner installs a set of solar panels that provide 3.0 kw of electric power when the sun shines. part a if the local utility charges $ 0.14/kwh , how much will she save each year on electricity because of her solar panels? express your answer in dollars.
The homeowner in Fort Collins, Colorado will save $777.00 per year on electricity because of their 3.0 kW solar panel system.
Assuming that the homeowner uses all of the electricity generated by the solar panels and does not feed any excess electricity back into the grid, we can calculate the savings as follows:
The solar panels generate 3.0 kW of power when the sun shines. If the sun shines for 1850 hours per year, the total amount of energy generated by the solar panels is:
3.0 kW x 1850 hours = 5550 kWh
If the local utility charges $0.14 per kWh, the homeowner would have paid:
5550 kWh x $0.14/kWh = $777.00
However, since the homeowner is generating their own electricity with the solar panels, they can avoid paying for this amount of electricity. Therefore, the homeowner will save $777.00 per year on electricity because of their solar panels.
the homeowner in Fort Collins, Colorado will save $777.00 per year on electricity because of their 3.0 kW solar panel system.
To know more about solar panels visit:
brainly.com/question/14809330
#SPJ11
a plane can travel with a speed of 80 mi/hr with respect to the air. determine the resultant velocity of the plane relative to the ground (magnitude only) if it encounters a
The resultant velocity of the plane relative to the ground will be 70 mi/h a plane can travel with a speed of 80 mi/hr with respect to the air.
a. A headwind would diminish the resultant speed of the plane to 70 mi/hr.
resultant velocity = 80-10
=70 mi/hr
b. The plane's final speed would rise to 90 miles per hour if there was a tailwind.
resultant velocity = 80 + 10
= 90 mi/hr
c. The plane's final speed would rise to 80.6 miles per hour in the event of a crosswind of 10 miles per hour.
resultant velocity =√(802+102)
= 80.62 mi/hr
The Pythagorean theorem can be used to figure this out: √[(80 mi/hr)² + (10 mi/hr)²])
d. A crosswind of 60 mi/hr would raise the plane's final velocity to 100 mi/hr. The Pythagorean theorem can be used to figure : √[ (80 mi/hr)² + (60 mi/hr)² ] )
resultant velocity = √(802+602)
= 100 mi/hr
What is the distinction between resultant speed and relative speed?The relative velocity refers to how one observer would perceive another moving object within their own frame. The velocity of an object when there are multiple influences on its motion in a fixed reference frame is known as the resultant velocity.
Incomplete question:
A plane can travel with a speed of 80 mi/hr with respect to the air. Determine the resultant velocity of the plane (magnitude only) if it encounters a
a. 10 mi/hr headwind.
b. 10 mi/hr tailwind.
c. 10 mi/hr crosswind.
d. 60 mi/hr crosswind.
Learn more about resultant velocity:
brainly.com/question/24767211
#SPJ4
What is the number of the highest harmonic that could be heard by a person who is capable of hearing frequencies up to 1.00 ×104Hz?
The highest harmonic that could be heard by a person who is capable of hearing frequencies up to 1.00×104 Hz is the 20th harmonic.
What is harmonic?Harmonic is a term that describes a relationship between two or more tones in which their frequencies are related in a simple mathematical ratio. When two or more tones sound simultaneously and their frequencies are related in this way, they create a pleasant, consonant sound. It is the basis of music theory and the foundation of the harmonic series. The harmonic series is an infinite sequence of pitches that are based on the fundamental frequency of a note, which is the main note or tone of a chord. The harmonic series is used to create chords, melodies, and various other musical elements.
This is because the 20th harmonic is the highest frequency that can be generated when the fundamental frequency is 1.00×104 Hz. The fundamental frequency is the lowest frequency that is generated in a harmonic series, and the higher harmonics have frequencies that are multiples of the fundamental. Therefore, the 20th harmonic would be 20 times the fundamental frequency, or 2.00×105 Hz.
To learn more about harmonic
https://brainly.com/question/2195012
#SPJ4
which one of the following is not an electromagnetic wave? which one of the following is not an electromagnetic wave? infrared radio waves ultraviolet gamma rays sound waves
Answer:
sound waves
Explanation:
sound waves are mechanical waves that need a medium like air to propagate throuh