What force will cause a displacement of 2m, while doing a work of 50J

The car can take the curve at a speed of 35.89 m/s without skidding to the outside of the curve.

To calculate the maximum speed at which the car can take the curve, we need to first determine the maximum force of static friction that can act on the car. This can be calculated using the formula:

F_friction = friction coefficient * normal force

The normal force is equal to the weight of the car and can be calculated using the formula:

N = m * g (where m is the mass of the car and g is the acceleration of gravity)

So:

N = 1151 kg * 9.8 m/s^2 = 11,288.8 N

F_friction = 0.37 * 11,288.8 N = 4,162.96 N

Next, we need to determine the centripetal force required to keep the car moving in a circle of radius 26m. This can be calculated using the formula:

F_centripetal = m * a

Where a is the centripetal acceleration and can be calculated using the formula:

a = v^2 / r

So we have to find v:

v = sqrt(F_friction*r /m)

v = sqrt(4,162.96 N * 26 m / 1151 kg) = 35.89 m/s

So, the car can take the curve at a speed of 35.89 m/s without skidding to the outside of the curve.

For more questions like Curve click the link below:

brainly.com/question/30278549

#SPJ4

A solution of 0.625 g of argon dissolved in 150 g of water has a molality of 0.104 mol/kg.

The molality of a solution is defined as the number of moles of solute (in this case argon) per kilogram of solvent (in this case water).

To find the number of moles of argon in the solution, we need to first find the molar mass of argon, which is 39.948 g/mol.

0.625 g of argon / 39.948 g/mol = 0.0156 moles of argon

To find the number of kilograms of water in the solution.

150 g of water / 1000 g/kg = 0.15 kg of water

Now we can use the definition of molality to find the molality of the solution:

0.0156 moles of argon / 0.15 kg of water = 0.104 mol/kg

Rounded to the third decimal place, the molality of the solution is 0.104 mol/kg.

To learn more about morality

https://brainly.com/question/4580605

#SPJ4

The total of all classes' relative frequencies will always equal: (a) 1

A frequency is a measurement of how frequently a certain value, occurrence, or feature takes place. It is employed in a wide range of disciplines, including science, engineering, mathematics, and statistics. Frequency is often expressed as a number, percentage, or ratio. For example, a frequency chart might show the number of times a particular product was purchased over a certain time period. Frequency can also refer to the number of times a particular wave pattern occurs in a given time period. In physics and engineering, frequency is used to measure the number of cycles per second of a wave or periodic phenomenon. For example, a wave with a frequency of 440 hertz (Hz) has 440 complete cycles per second.

To learn more about frequencies
https://brainly.com/question/27151918
#SPJ4

Answer:

4/3 kg

Explanation:

KE = (1/2)mv^2

6=0.5*m*(3)^2

m=4/3

The tendency of moving objects is to continue moving. The simplest Newton's rule, known as inertia, governs motion. With inertia, an item starts going in one direction and needs an equal or stronger force to stop.

According to Newton's first law, unless compelled by an external force to change its state, an object will remain at rest or in uniform motion along a straight line.

A body's propensity to resist modifications to its state of motion is known as inertia. There is no net force applied on the object if all external forces cancel one another out.

The object will keep moving at a steady speed if there is no net force acting on it.

Learn more about Inertia:

brainly.com/question/2419201

#SPJ4

The application of Newton's 1st law is a) a cricket ball stops after going through some distance, for 2nd law is b) Force applied by the bullet on gun, for 3rd law is c) launching of a rocket from earth, respectively.

Newton's first law also known as the law of inertia. A balling rolling on the ground stops after some time due to the opposite force of friction working between the ball and the ground.

Newton's second law of force states that the rate of change of momentum of an object is equal to the force applied by the object. When a bullet is fired from a gun change in the momentum of the bullet generate the force that cause the bullet to be fired and to generate the recoil velocity in the gun.

Newton's 3rd law states the action-reaction relationship. When a rocket is launched from the earth, it applies a force on the ground that generate the enough reaction force that causes the rocket to generate  orbital velocity.

To know more about Force, here

https://brainly.com/question/13191643

#SPJ4

The crate moves with velocity vecv in the positive X-direction, as shown in the FBD above. Forces acting upon that crates are A 65 kilogramme crate is being kept from sliding to across warehouse floor by a force pf 250 N.

Writing equal forces in their component parts using Newton's second law

0 for Sigma F x.

0 Rightarrow F-F friction

----(1) \s\

0 for Sigma F y.

-mg=0 rightarrow

——(2)

Equation (1) yields F friction=F.

Rightarrow ___k=F ___k

Rightarrow mu _k=frac F N

Rightarrow mu k=frac fmg

——-from Equation (2)

Rightarrow _k=frac 250*65*9.8=0.39

fr = Fr/N

The resistive frictional force (Fr) divided more by normal of perpendicular energy (N) pushing adjacent objects together yields the friction coefficient (fr), which is a numerical value. Equation fr = Fr/N serves as a representation of it.

To know more velocity about :-

https://brainly.com/question/28738284

SPJ1

The crate moves with velocity vecv in the positive X-direction, as shown in the FBD above. Forces acting upon that crates are A 65 kilogramme crate is being kept from sliding to across warehouse floor by a force pf 250 N.

0 for Sigma F x.

0 Rightarrow F-F friction

----(1) \s\

0 for Sigma F y.

-mg=0 rightarrow

——(2)

Equation (1) yields F friction=F.

Rightarrow ___k=F ___k

Rightarrow mu _k=frac F N

Rightarrow mu k=frac fmg

——-from Equation (2)

Rightarrow _k=frac 250*65*9.8=0.39

fr = Fr/N

The resistive frictional force (Fr) divided more by normal of perpendicular energy (N) pushing adjacent objects together yields the friction coefficient (fr), which is a numerical value. Equation fr = Fr/N serves as a representation of it.

To know more velocity about :-

brainly.com/question/28738284

#SPJ1

They each pull equally hard, forcing the Sun to shift slightly. when the Sun's gravitational pull holds the planets in their orbits,

The average period of the solar cycles, including irradiance, sunspots, solar flares, radio flux, and polarity flip, is 11 Earth years. According to scientists, the Sun's internal processes and atmospheric interactions are what cause various solar activity. According to the authors, these behaviours and cycles also have an outside origin. Because planets need external constant loading to support their ongoing internal processes and dynamic systems. Here, the Sun's dynamical system and internal processes are activated by the planets' uneven gravitational fields, particularly by the biggest planet in the solar system, Jupiter, which has 67 moons and an orbital period of 11.856 years. As a result, distinct solar cycles are produced.

Learn more about Gravitational here:

https://brainly.com/question/3009841

#SPJ4

The equation that models the ball's height is: h = -16t2 + vt + h0, where h0 is the initial height of the ball and v is the initial velocity of the ball.

Velocity is a measure of the rate of change of an object's position in a certain direction. It is a vector quantity, meaning that it has both magnitude and direction. Velocity is typically measured in meters per second (m/s) or kilometers per hour (km/h).

The equation that models the ball's height is: h = -16t2 + vt + h0, where h0 is the initial height of the ball and v is the initial velocity of the ball. This equation models the ball's height based on the principles of projectile motion, which states that the vertical motion of an object can be modeled using the equation h = -16t2 + vt + h0, where h0 is the initial height of the ball and v is the initial velocity of the ball. The negative sign indicates that the object is being affected by gravity, and the -16 represents the gravitational acceleration of 9.8 m/s2 divided by 2.

To learn more about velocity

https://brainly.com/question/80295

#SPJ4

Answer:

16 24  6

Explanation:

It would need to go 685.2 km/h quicker to equal the sound speed in air.

speed of sound at 0°= 331.5 m/s

Sound travels through cold air = 1,190 kilometers per hour

world's fastest train can travel= 574.8 kilometers per hour

match the speed of sound in air= 1,190*331.5/574.8.

                                                    =  685.2 km/h

Sound does not move in space at all. In the void of space, there is rarely any air. There is no sound in space because there is no air there, and sound is nothing more than air vibrating. If you were inside one, you wouldn't hear an explosion from another spacecraft.

To know more about speed of sound visit:-

https://brainly.com/question/14921533

#SPJ1

To emit electrons, the experimenter must try blue light.

Light emits electrons when electromagnetic radiation hits a material, such as the photoelectric effect. Photoelectron is a term used to describe electrons emitted in this manner. When light hits a metal, electrons are emitted from the metal's surface, known as the photoelectric effect. This process is also called photoemission, and the electrons emitted from the metal are called photoelectrons. To eject electrons, we need to try blue light, which has a shorter wavelength than the green light needed for light emission. To emit electrons, the experimenter must try blue light.

Learn more about Electrons

brainly.com/question/15216746

#SPJ4

Answer:

The mineral's hardness is greater than 4 but less than 5.5 on the Mohs hardness scale.

It will take 3/2 miles approximately to stop the train safely, if the deceleration of the train is 833.33 miles/h² and initial speed of the train 50 mph.

Initial velocity of the train, u = 50 mph

Deceleration of the train, a = - 833.33 m/h²

Let the final velocity of the train, = v

By the third equation of motion, which related the final velocity, with initial velocity, acceleration ( or deceleration), and the distance covered between two velocities.

v² = u² + 2aS

v² = 50² + 2 × (-833.33) × S

0 = 2500 - 1633.33 ×S

S = 2500/1633.33

S = 1.5 miles

Hence option C is correct.

__ The given question is incomplete, the complete question is

"If the safe deceleration to stop a train is 833.33 m/h², then it takes a train going at 50 mph approximately ___ to stop safely.

To know more about deceleration, here

https://brainly.com/question/4403243

#SPJ4

The 'quantity of motion' is another name for momentum.

The result of mass and velocity is momentum.

Momentum = mass times of velocity

momentum =mv

Momentum is characterizes as the intensity of a body's which is in motion. As momentum depends both on velocity and the direction of the body's motion, it is quantified by "mass velocity."

The word "momentum" is frequently used in sports. A squad which is moving front and has momentum which is  difficult to stop. A team that is genuine moving forward and charging momentum will be challenging to stop. A physics phrase, momentum tells us the amount of motion that an item has.

To learn more about Momentum:

https://brainly.com/question/6271830

#SPJ4

As per the problem statement the acceleration of the dropped ball is 9.8 m/s^2.

The pace at which a speed changes over time is called acceleration.It is the rate at which an object's speed, or velocity, changes. Depending on the direction of the change in velocity, acceleration can be either positive or negative. A positive acceleration indicates that the object is speeding up, while a negative acceleration indicates that the object is slowing down. Acceleration can be expressed using the equation a = (vf - vi) / t, where a is the acceleration, vf is the final velocity, vi is the initial velocity, and t is the time elapsed.

The acceleration of the dropped ball can be calculated using the equation a = (v-u)/t, where a is the acceleration, v is the final velocity, u is the initial velocity, and t is the time elapsed. In this case, u = 0 m/s (since the ball is dropped from rest), v = 19.6 m/s, and t = 2 seconds. Plugging these values into the equation, we get a = (19.6-0)/2 = 9.8 m/s^2, which is the acceleration of the dropped ball.

To learn more about acceleration

https://brainly.com/question/460763

#SPJ4

A 15 m/s throw of a 0.50 kilogramme football is made to the right. In 0.020 seconds, a motionless player receives the ball and pulls it to a stop.

It is beneficial to be capable to kick the ball far or quickly in all football codes. The speed of the foot at the moment it makes contact with the ball is a crucial factor in determining ball speed or kick distance.

The four forces are gravity, shear forces, contact pressure, and applied force. Football players continually use the force of gravity when they kick, throw, or leap into the air to dodge a tackle or receive the ball.

to know more about velocity visit:

https://brainly.in/question/54346754

#SPJ4

A 15 m/s throw of a 0.50 kilogramme football is made to the right. In 0.020 seconds, a motionless player receives the ball and pulls it to a stop.

It is beneficial to be capable to kick the ball far or quickly in all football codes. The speed of the foot at the moment it makes contact with the ball is a crucial factor in determining ball speed or kick distance.

The four forces are gravity, shear forces, contact pressure, and applied force. Football players continually use the force of gravity when they kick, throw, or leap into the air to dodge a tackle or receive the ball.

To know more about velocity visit:

https://brainly.com/question/80295

#SPJ1

All of the given except environment friendly are advantages of pneumatic systems. Sometimes these systems causes sound pollution and that's why it cannot be said as environment friendly.

A pneumatic system is a group of linked parts that uses compressed air to operate automated machinery. Industrial production, a garage at home, or a dentist's office are a few examples.

The motion used to generate this job might be either linear or rotational. To safeguard the working cylinders, actuators, tools, and bladders, compressed air or pressured gas is often filtered and dried.

A lubrication device that provides an oil mist to the closed pressured system is necessary for some applications. The noise produced by pneumatic system greater compared to other systems. Hence , option D is correct.

Find more on pneumatic systems:

https://brainly.com/question/12008408

#SPJ1

15 is the horizontal distance from the cliff did the projectile traveled.

In projectile motion, use the following formula to determine the horizontal distance:

Divide the gravity-induced acceleration (g) by the vertical height (h) multiplied by two.

You may calculate the horizontal distance by taking the square root of the step 1 result and multiplying it by the projection's initial velocity, u.

Using the Pythagorean Theorem, the slope length is determined by multiplying the rise and run distances, where the rise and run are the vertical and horizontal distances, respectively.

20/2 = 10 * 1.5 = 15.

To learn more about horizontal distance visit:

brainly.com/question/24784992

#SPJ1

The formula for magnitude is ' |v| =√(x^2 + y^2) ' and the formula for direction is ' θ = arctan(y/x) '.

In Physics, the term magnitude answers 'how much? and the term direction answers 'which way?'. For instance, North is a direction and 5 meters is a magnitude. '5 meters' north is a vector quantity with both magnitude and direction.

Thus, for vector quantities, the formula to determine the magnitude to be used is |v| =√(x^2 + y^2), while to determine the direction the formula θ = arctan(y/x) is used.

You can learn more about magnitude and direction at

https://brainly.com/question/24256733

#SPJ4

We use the perpendicular distance in the Torque equation because it represents the distance that the force is applied from the axis of rotation.

Torque is a measure of the twisting force applied to an object, often used in mechanical engineering. It is defined as the product of the force applied and the perpendicular distance from the axis of rotation to the point where the force is applied. This perpendicular distance is also known as the lever arm.

A larger lever arm means that the force is applied farther from the axis of rotation, resulting in a torque of greater magnitude.

Additionally, using the perpendicular distance in the torque equation allows for the quantification of the torque generated by a force regardless of the direction of force. The torque would be the same if the force is applied in the opposite direction, as long as the lever arm is the same.

In summary, the use of the perpendicular distance in the torque equation allows us to quantify the twisting force applied to an object, considering force and distance from rotation axis. This information can be used to design and analyze mechanical systems, such as engines and gears, and predict how they will perform under different loads and conditions.

Learn more about Torque here:

https://brainly.com/question/30187135

#SPJ4

Rest, motion and direction are the three different types of inertia.

Inertia is defined as the property of a material to remain in the same straight line at rest or in uniform motion unless acted upon by an external force. Rest Inertia is the inability of an object to change its rest state by itself is called rest inertia. Directional inertia is the inability of the body to change the direction of motion on its own. The inertia of movement is the inability of the body itself to change its state of motion is called motion inertia. These are the different types of inertia.

Learn more about the inertia in

https://brainly.com/question/3268780

#SPJ4

Sister chromatids fail to separate if nondisjunction occurs during meiosis II. In this case, 50% of the gametes produced are normal haploid gametes, 25% have an extra chromosome, and 25% lack a chromosome.

Nondisjunction and premature separation of sister chromatids appear to be the two main nondisjunction mechanisms in human spermatogenesis during the first meiotic division, and both mechanisms contribute equally to the emergence of aneuploidy. The elevated disomy frequencies detected in spermatocytes II are significantly higher than those previously described in human spermatozoa, implying the existence of a postmeiotic checkpoint monitoring numerical abnormalities.

At the onset of puberty, spermatogonia in males undergo constant mitotic proliferation, and these primordial germ cells differentiate, undergo meiosis without arrest, and eventually form mature spermatozoa.

Learn more about spermatogenesis here:

https://brainly.com/question/14546768

#SPJ4

The change in momentum is a measure of how much an object's motion has changed. When a force acts on an object, it can make the object move faster or slower, or change the direction of its motion. The amount of this change is called the change in momentum.

In this case, a 15 N force acted on a 1 kg ball for 10 seconds, which means that the force was pushing or pulling on the ball for 10 seconds. This force caused the ball to change its motion and its momentum.

To find out how much the ball's momentum changed, we multiply the force by the time it acted on the ball. So in this case, 15 N (the force) x 10 s (the time) = 150 Ns (change in momentum).

It's important to note that the unit of impulse is Ns.

So, this ball's change in momentum is 150 Ns, it means that the ball's motion changed by 150 Ns due to the force that acted on it for 10 seconds.

Δp = F * t = 15 N * 10 s = 150 Ns

So, the ball's change in momentum is 150 Ns. This is also known as impulse, which is the product of force and time.

The forces acting on the book as it is at rest on the table include gravity pushing down and the table pushing up, and these forces are balanced.

The book is under the influence of two forces. The downward force of the Earth's gravity and the upward force of the table's weight on the book are the two forces at play.

The table pulls on the book with an equal amount of force to that which the book pulls on the table, in accordance with Newton's third law. The book remains at rest on the table as a result of the net force being zero.

To know more about force visit:

https://brainly.com/question/13492374

#SPJ4

The earth’s spheres which are involved in the melting of a glaciers include the following below:

This is referred to as a persistent body of dense ice that is constantly moving under its own weight.

The cryosphere is described as the portions on Earth where water appears in solid form such as glaciers while the hydrosphere is all the forms water on a planet including liquid water, ice etc and the geosphere which contains athenosphere provides the heat which is involved in the melting.

Read more about Glacier here https://brainly.com/question/6666513

#SPJ1

The full question:

Which of the earth’s spheres are involved in the melting of a glaciers?

geosphere, troposphere, cryosphere atmosphere, geosphere, cryosphere atmosphere, asthenosphere, biosphere hydrosphere, asthenosphere, atmosphere

The gravitational force is altered more by an increase in the separation between the objects than by an equivalent increase in mass.

It is based on the mass and gravitational acceleration of the item. Mass is a fundamental, immutable feature. Weight depends on gravitational force, which is a force. The mass has a direct relationship with this force. The force of gravity will be stronger the more mass an item has. As a result, when we compare the distance traveled by objects of various masses, gravity is shown to be irrelevant. Air resistance, often known as drag, is a significant component of the force.

The slope tells us how much force, in newtons, is applied to each kilogram of mass. A thing's mass is a measure of how much matter there is in it. This is a physical trait that cannot be altered. Mass cannot be created or destroyed. The combination of mass and gravitational acceleration produces weight.

To know more about gravity on

https://brainly.com/question/28860845

#SPJ4

Edge computing improves performance and provides a more pleasant user experience. It improves privacy and data security while also lowering operational costs.

What exactly is edge computing?

Edge computing is a computing model in which key processing tasks are performed within the framework or environment in which data was generated. It is a framework that enables the generation, storage, and processing of data in the location where it is generated, rather than relying on a data center or central data computing environment.

Edge computing also helps AI/ML applications because data is processed close to where it is generated, making AI/ML results easier and faster to obtain.

Learn more about edge computing here:

https://brainly.com/question/28256857

#SPJ4

A computer network with low latency is one that is built to quickly handle lots of data packets (latency).

These networks are intended to assist activities that require quick access to constantly changing data in close to real time. By moving processing work from the cloud to local devices, such laptops and smartphones, edge computing reduces latency for consumers. Consumers may increase the adaptability and affordability of their gadgets while still using them as dependable financial instruments by utilizing edge computing.

When compared to cloud services, which are concentrated on a single data center, data processing requires a more scattered network. It decreases latency and offers real-time response by removing the round-trip to the cloud. Edge computing, like an Internet of Things (IoT) device, controls compute and communication closer to where they will be utilized, which can speed up processing. Increased uniformity is a further advantage.

To know more about latency on

https://brainly.com/question/29781666

#SPJ4

The density of water vapor is 11.6 grams/cubic meter if the  water vapor density if the maximum water vapor in air at this temperature is 20 grams/cubic meter.

All the related temperature and dew point calculated for the specified hour are used to calculate relative humidity. It is expresses as %.

Given data in the question can be formulated as that the maximum water vapor in air at this temperature is 20 grams/cubic meter at 22°C, that is, density of vapor at 100% humidity can be expressed as 20g/  at 22°C.

The device shows that at 22 degrees Celsius the relative humidity is 58%.

The water vapor density at that moment can be calculated as = 20g/ × 58%

= 11.6 g/ .

= 11.6 grams/cubic meter.

As per the according to the measurement of device, the water vapor density is 11.6 grams/cubic meter.

Learn more about relative humidity here:

brainly.com/question/22069910

#SPJ4

The name Margaret Curie is still used to refer to the founder of modern physics. She and her husband Pierre discovered radio and polonium in 1898, and in 1903,

She was awarded the first Physics Nobel Prize in recognition of their discoveries. We have to think that everyone of us has a unique gift that has to be developed. "Nothing in life has to be feared; merely understand," the saying goes. Like Nobel, I believe that humankind will gain more from scientific developments than it will lose.

She discovered polonium and radium, promoted the use of radiation in medicine, and radically altered our understanding of radioactivity despite a career of physically taxing and ultimately deadly labor. Born was Curie. Skowron, John

To know more about  physics on

https://brainly.com/question/20375130

#SPJ4