what gauge pressure, in pascals, is required to lift a car with a mass of 1200 kg ? express the result of part a in atmospheres.

Researchers believe that asteroids in the asteroid belt are primal rocks that did not merge into a planet due to several reasons. First, the asteroid belt is located between Mars and Jupiter,

which is a region where the gravitational pull of Jupiter prevented the formation of a planet. This means that the asteroids in the region could not combine to form a planet and remained as individual bodies.

Second, the composition of the asteroids in the asteroid belt suggests that they are remnants of the early solar system. The asteroids are made up of primitive materials such as rock, metal, and ice,

which were present in the early solar system. This suggests that the asteroids did not undergo any significant changes or evolution, and remained as they were when they formed.

Finally, the size and distribution of the asteroids in the asteroid belt also support the idea that they are primal rocks that did not merge into a planet. The asteroids are of varying sizes,

ranging from tiny rocks to large bodies such as Ceres, which is the largest object in the asteroid belt. The distribution of the asteroids is also uneven,

with some regions being more densely populated than others, which would not be the case if they had formed into a planet.

In summary, researchers believe that asteroids in the asteroid belt are primal rocks that did not merge into a planet due to the location, composition, size, and distribution of the asteroids.

These factors suggest that the asteroids are remnants of the early solar system that did not undergo any significant changes or evolution.

To know more about asteroids refer here

https://brainly.com/question/19161842#

#SPJ11

Ranking the moments of inertia of two identical uniform solid spheres attached by a solid uniform thin rod about different axes is as follows:

              Axis passing through the center of the rod and perpendicular to the plane containing the two spheres: This axis passes through the center of mass of the system, and hence the moment of inertia is minimum about this axis.Axis passing through the center of one of the spheres and perpendicular to the axis of the rod: This axis passes through the center of mass of one of the spheres and is perpendicular to the axis of the rod, and hence the moment of inertia is intermediate about this axis.Axis passing through the center of one of the spheres and parallel to the axis of the rod: This axis is parallel to the axis of the rod and passes through the center of mass of one of the spheres, and hence the moment of inertia is maximum about this axis.The moment of inertia is a measure of an object's resistance to rotational motion and depends on the object's mass distribution and the axis of rotation. The moment of inertia is the lowest about the axis passing through the center of mass and perpendicular to the plane containing the two spheres because this axis passes through the point where the mass is concentrated, making it easier to rotate the system about this axis.

To learn more about moment of inertia:

https://brainly.com/question/15246709

#SPJ11

The critical angle is approximately 48.8 degrees.

The light must start in the plastic material to get total internal reflection at the interface.

The critical angle can be calculated using the formula:

sinθc = n₂/n₁ , where n₁ is the refractive index of the material in which light is initially traveling, and n₂ is the refractive index of the material in which the light is incident upon.

Here, n₁ = 1.33 (refractive index of water) and n₂ = 1.46 (refractive index of plastic)

So, sinθc = n₂/n₁ = 1.46/1.33 = 1.097

Using inverse sine function, we get:

θc = sin-1(1.097) = 48.8 degrees (approx.)

Therefore, the critical angle is approximately 48.8 degrees.

Learn more about “ critical angle “ visit here;

https://brainly.com/question/9896008

#SPJ4

Van de Graaff generator transfers charge by electrostatic induction via a motorized belt carrying a positive charge across a charging comb at the base of the generator.

A Van de Graaff generator transfers charge by the process of electrostatic induction. The generator consists of a hollow metal sphere or dome mounted on a column or pedestal, with a rubber belt running from a motorized pulley at the base to an upper pulley mounted on top of the column.

The belt is made of a non-conductive material and carries a positive charge as it moves across a metal comb called the "charging comb" at the base of the generator.

As the belt moves, it picks up electrons from the metal comb, which leaves the comb with a positive charge. The belt then carries the positive charge to the top of the generator where it is deposited on the metal sphere or dome.

Electrons are also repelled from the metal dome, so the dome builds up a strong positive charge. If a conductive object is brought close to the generator, the positive charge on the dome will induce a negative charge on the object, and vice versa.

This is why Van de Graaff generators are often used for scientific experiments and demonstrations, as they can create very strong electrostatic fields.

To know more about charge, refer here:

https://brainly.com/question/29789037#

#SPJ11

One condition under which Hooke's law is invalid is when the spring is stretched beyond its elastic limit. Simple harmonic oscillation is a type of motion that occurs when a system is displaced from its equilibrium position and experiences a restoring force that is proportional to the displacement.

Hooke's law is a principle that states that the amount of deformation or stretching of a spring is proportional to the force applied to it. This law holds true only under certain conditions, and it can become invalid in certain circumstances.

One condition under which Hooke's law is invalid is when the spring is stretched beyond its elastic limit. The elastic limit is the point beyond which the spring will no longer return to its original shape and size when the applied force is removed. When a spring is stretched beyond its elastic limit, it can become permanently deformed and may not obey Hooke's law.

Another condition under which Hooke's law is invalid is when the spring experiences plastic deformation. Plastic deformation occurs when a spring is stretched beyond its yield point, which is the point at which it can no longer support the applied force without undergoing permanent deformation. When a spring undergoes plastic deformation, it will not obey Hooke's law and will not return to its original shape and size.

Simple harmonic oscillation is a type of motion that occurs when a system is displaced from its equilibrium position and experiences a restoring force that is proportional to the displacement. This type of motion is characterized by a periodic motion in which the system oscillates back and forth around its equilibrium position.

In a simple harmonic oscillator, the system's displacement is proportional to the force applied to it, and the system oscillates at a constant frequency. This type of motion is found in many systems, including pendulums, springs, and electrical circuits.

In summary, Hooke's law is only valid under certain conditions and can become invalid when a spring is stretched beyond its elastic limit or undergoes plastic deformation. Simple harmonic oscillation is a type of motion characterized by a periodic motion in which a system oscillates back and forth around its equilibrium position.

To know more about Hooke's law, refer

https://brainly.com/question/17068281

#SPJ11

If A diffraction grating has 45,000 slits/cm then The distance between adjacent slits on this diffraction grating is approximately 2.22 micrometers.

To determine the distance between adjacent slits on a diffraction grating, we need to use the formula:
d = 1/n * dλ/a
where d is the distance between adjacent slits, n is the number of slits per unit length (in this case, 45,000 slits/cm), dλ is the wavelength of the incident light, and a is the angle between the incident light and the diffracted light.
Assuming we are working with visible light (with a wavelength of approximately 500 nm) and a diffraction angle of 30 degrees, we can calculate the distance between adjacent slits as follows:
d = 1/(45,000/cm) * (500 nm)/(sin(30 degrees))

d = 1/(4.5 x 10^5 /m) * (500 x 10^-9 m)/(0.5)
d = 2.22 x 10^-6 m
Therefore, the distance between adjacent slits on this diffraction grating is approximately 2.22 micrometers.

To know more about diffraction visit :

https://brainly.com/question/12290582

#SPJ11

The formula for the spacing of a diffraction grating: d = 1/N * λ/sin(θ)

To answer this question, we need to use the formula for the spacing of a diffraction grating: d = 1/N * λ/sin(θ)

Where d is the distance between adjacent slits,

N is the number of slits per unit length (in this case, 45,000 slits/cm),

λ is the wavelength of the incident light, and θ is the angle between the incident light and the diffracted light.

Assuming we are using visible light with a wavelength of 500 nm (0.0005 cm), and that the diffraction angle is 30 degrees, we can calculate the spacing as follows:

d = 1/45000 * 0.0005 / sin(30) = 1.155 x 10^-6 cm

So the distance between adjacent slits in this diffraction grating is approximately 1.155 micrometers (or 1155 nanometers).

In conclusion, the distance between adjacent slits in a diffraction grating with 45,000 slits/cm is 1.155 x 10^-6 cm, or approximately 1.155 micrometers. This calculation is based on the formula for diffraction grating spacing, which takes into account the number of slits per unit length, the wavelength of the incident light, and the diffraction angle.

To know more about diffraction grating visit: https://brainly.in/question/40622849?referrer=searchResults

##SPJ11

on the underlined line the awnser is primary somatosensory cortex

HOPE IT WILL HELP YOU

The speed of the train is approximately 29.9 m/s.

The centripetal force that keeps the lamp suspended during the turn is provided by the horizontal component of the tension force in the cable. We can equate this force to the force required to keep an object of mass m moving in a circle of radius r at a constant speed v, which is given by F = mv²/r.

Let θ be the angle that the lamp swings out from the vertical, which is equal to the angle between the cable and the vertical. Then, the horizontal component of the tension force is T cos θ. Setting this equal to mv²/r, we get:

T cos θ = mv²/r

Solving for v, we get:

v = √(Tr/mcosθ)

We are given the radius of the curve r = 235 m and the angle θ = 17.5°. We can calculate the tension in the cable T using the weight of the lamp, which is given by T sin θ = mg, where g is the acceleration due to gravity. Therefore:

T = mg/sinθ

Substituting this expression for T into the equation for v, we get:

v = √(mgr/tanθ) = √(g r tanθ)

Plugging in the values, we get:

v = √(9.81 m/s² × 235 m × tan(17.5°)) ≈ 29.9 m/s

Therefore, the speed of the train is approximately 29.9 m/s.

Learn more about Uranium here:

https://brainly.com/question/31564123

#SPJ11

The kinetic-molecular theory states that gas particles are very far apart. This idea explains the low density of a gas.

The kinetic-molecular theory of gases is a theoretical model that describes the behavior of gases based on the motion of the gas particles. According to this theory, gas particles are considered to be very far apart and have negligible volume compared to the volume of the container they occupy. The kinetic-molecular theory helps to explain several macroscopic properties of gases, including pressure, temperature, volume, and the behavior of mixtures of gases. For example, the theory explains how an increase in temperature leads to an increase in the kinetic energy of gas particles, resulting in an increase in the pressure and volume of the gas. It also explains how gases mix uniformly and move from high to low pressure regions to reach equilibrium.

Learn more about “ kinetic-molecular theory  “ visit here;

https://brainly.com/question/12644965

#SPJ4

To determine the volume of water displaced by a floating wood block, you need to measure the volume of the submerged portion of the block.

1. Find the dimensions (length, width, and height) of the submerged portion of the wood block. You can do this by marking the waterline on the block, then removing it from the water and measuring the submerged part below the waterline.
2. Calculate the volume of the submerged portion using the formula: Volume = Length x Width x Height.
3. The volume of the submerged portion is equal to the volume of water displaced by the floating wood block.
By measuring the submerged portion of the wood block and calculating its volume, you can determine the volume of water displaced when the block is floating.

For more information on floating of wood kindly visit to

https://brainly.com/question/19596136

#SPJ11

An object weighing 50 kg, the Schwarzschild radius is roughly

1.70 × 10⁻³³km.

In the following formula, the Schwarzschild radius (Rs) is denoted.

Rs = (2GM) / c²

Where M is the object's mass, G is the gravitational constant, and c is the speed of light.

The mass M for a 50 kg object can be translated into kilos as follows:

M = 50 kg × (1 kg/2.246 lbs) = 22.6796 kg.

The Schwarzschild radius can be determined using the provided values of     G = 6.67430× 10⁻¹¹ N m2/kg² and c = 299792458 m/s as follows:

Rs = 2 ×6.67430 ×10⁻¹¹ N m/kg² * 22.6796 kg) ÷ (299792458 m/s)².

Rs = 1.695 10⁻²⁷ meters.

We can divide this by 1000 twice to get kilometers:

R = 1.695 x 10⁻²⁷ meters (1 km = 1000 m)

Rs ≈ 1.70 × 10⁻³³km

Therefore, an object weighing 50 kg, the Schwarzschild radius is roughly 1.70 × 10⁻³³km.

Learn more about Schwarzschild radius

https://brainly.com/question/29534114

#SPJ4

The amplitude of the electric field of the light wave is typically measured in volts per meter (V/m).  It is a measure of the intensity of the light wave.

The amplitude of the electric field of a light wave is the maximum value of the electric field strength at any point in space during one cycle of the wave. It is a measure of the intensity of the light wave. The unit for measuring the electric field strength is volts per meter (V/m).

This means that for each meter of distance, the electric field strength changes by a certain number of volts. The amplitude of the electric field of a light wave can vary depending on the frequency and energy of the photons that make up the wave. In general, higher frequency light waves have a higher amplitude and are more intense than lower frequency light waves. The amplitude of the electric field is a key factor in determining the properties and behavior of light waves.

Learn more about amplitude here:

https://brainly.com/question/9525052

#SPJ11

The focal length of the glasses needed is 18.04cm.

1) To determine the focal length (f) of the glasses needed when they are 2 cm away from her eyes, we can use the lens equation:

1/f = 1/do + 1/di

Where do is the object distance (25 cm), di is the image distance (60 cm - 2 cm = 58 cm). Plugging in the values:

1/f2cm = 1/25 + 1/58
f2cm = 1/(1/25 + 1/58) ≈ 18.04 cm

2) For the glasses that are 3 cm away from her eyes, di will be 60 cm - 3 cm = 57 cm. Using the lens equation:

1/f3cm = 1/25 + 1/57
f3cm = 1/(1/25 + 1/57) ≈ 17.32 cm

3) To find the focal length of the contact lenses needed for a nearsighted person, we need to use the lens equation:

1/f = 1/do + 1/di

Since he wants to see objects at a great distance (infinity), the image distance (di) will be at his farpoint. For the left eye, the farpoint is 482 cm, and the object is at infinity (do = ∞). Plugging in the values:

1/fleft = 1/∞ + 1/482
fleft = 1/(0 + 1/482) ≈ -482 cm

4) For the right eye, the farpoint is 632 cm. Using the lens equation:

1/fright = 1/∞ + 1/632
fright = 1/(0 + 1/632) ≈ -632 cm

To learn more about equation, refer below:

https://brainly.com/question/29657983

#SPJ11

According to the question the current in the 3Ω resistor is I = 5A/2 = 0.67A.

Current is defined as the flow of electricity or a particular direction of movement. It is the rate of flow of electric charge in an electrical circuit. Current is measured in amperes (amps) and is the result of an electric charge moving through a conductor, such as a wire. Current can also refer to the speed with which things move in a particular direction, such as the current of a river.

This can be determined by using the formula for total current I = V/R, where R is the total resistance of the circuit and V is the voltage. The total resistance of the circuit is given by the formula R = (1/R1 + 1/R2)⁻¹.
In this case, R1 = 3Ω and R2 = 1.5Ω, so R = (1/3 + 1/1.5)⁻¹ = 2Ω. Therefore, the total current is I = 10V/2Ω = 5A.
Since the 3Ω resistor is wired in parallel with the 1.5Ω resistor, the current through the 3Ω resistor must be equal to the current through the 1.5Ω resistor.
Therefore, the current in the 3Ω resistor is I = 5A/2 = 0.67A.

To learn more about current
https://brainly.com/question/25922783
#SPJ4

It would take 435 seconds to deposit an even layer of gold 1.00 x 10-3 cm thick on the object with a current of 3.25 A.

To calculate the time required to deposit an even layer of gold 1.00 x 10-3 cm thick on an object with a surface area of 49.8 cm2, we will use the following terms: surface area, density of gold, current, and Faraday's constant.

Step 1: Calculate the volume of gold needed to cover the object.
Volume = Surface Area x Thickness
Volume = 49.8 cm2 x 1.00 x 10-3 cm = 0.0498 cm3

Step 2: Calculate the mass of gold required using the density of gold.
Mass = Volume x Density
Mass = 0.0498 cm3 x 19.3 g/cm3 = 0.961 g

Step 3: Convert the mass of gold to moles using the molar mass of gold (Au = 197.0 g/mol).
Moles = Mass / Molar Mass
Moles = 0.961 g / 197.0 g/mol = 0.00488 mol

Step 4: Calculate the total charge required to deposit the gold.
Total Charge = Moles x Faraday's Constant x Oxidation State
Total Charge = 0.00488 mol x 96,485 C/mol x 3 = 1,414 C

Step 5: Calculate the time required to deposit the gold using the given current.
Time = Total Charge / Current
Time = 1,414 C / 3.25 A = 435 s

For more about deposit:

https://brainly.com/question/2507231

#SPJ11

The ratio of the radii of their event horizons is [tex]0.59[/tex] .

Ratio is a comparison between two or more quantities expressed in terms of their relative sizes. It is used to determine the relationship between different values or measures and to compare the sizes of different quantities. Ratios can be expressed in various ways, such as fractions, percentages, decimals, and even in terms of simple words.

The ratio of the radii of their event horizons is determined by the mass of each black hole using the formula R = 2GM/c², where G is the gravitational constant, M is the mass of the black hole, and c is the speed of light. Therefore, for black hole A, R₁ = [tex]2 \times (6.67 \times 10- m^3 kg-1 s-2)\times(3.98\times1030 kg)/(3.00\times108 m s^{-1})^2 = 8.82\times106 m.[/tex]

For black hole B, R₂ =[tex]2 \times (6.67 \times 10-11 m^3 kg{-1} s^{-2}) \times (6.64 \times 1030 kg)/(3.00 \times 108 m s^{-1})^2 = 1.50 \times 107 m.[/tex]

The ratio of the radii of their event horizons is therefore [tex]R1/R2 =[/tex][tex]8.82106 m/1.50107 m = 0.59.[/tex]

To learn more about ratio

https://brainly.com/question/17223098

#SPJ4

Therefore, the largest acceleration that can be given to the block without breaking the rope is approximately 0.67 m/s².

To find the maximum acceleration that can be given to the block without breaking the rope, we need to consider the forces acting on the block and the tension in the rope.

At rest, the weight of the block is balanced by the tension in the rope:

Tension = Weight of block = 30 N

To find the maximum acceleration, we need to find the maximum tension in the rope. We know that the breaking strength of the rope is 50 N, so the tension cannot exceed this value.

When the block is accelerating upward, the tension in the rope will be greater than when it is at rest. We can use Newton's second law to relate the acceleration and tension:

Tension - Weight of block = Mass of block x Acceleration

Substituting the values we know:

50 N - 30 N = 30 N x Acceleration

20 N = 30 N x Acceleration

Acceleration = 20 N / 30 N

Acceleration = 0.67 m/s² (rounded to two significant figures)

To know more about acceleration,

https://brainly.com/question/30824577

#SPJ11

A ball is dropped from a height of 9ft. The elasticity of the ball is such that it always bounces upward one third the distance it has fallen. The total distance the ball has traveled at the instant it hits the ground for the fifth time is 48 feet.


When the ball is dropped from a height of 9ft, it will first bounce back up to 6ft (one-third of the distance it has fallen). Then, it will fall back down to the ground, traveling a total distance of 9+6 = 15ft.  

For the second bounce, the ball is dropped from a height of 6ft (the height of the first bounce), and it will bounce back up to 4ft (one-third of the distance it has fallen). So, the total distance traveled by the ball in the second bounce is 6+4 = 10ft.  

Using the same process, we can find that the ball travels 6+4 = 10ft in the third bounce, 4+2.67 = 6.67ft in the fourth bounce, and 2.67+1.78 = 4.45ft in the fifth bounce.  

Therefore, the total distance the ball has traveled at the instant it hits the ground for the fifth time is: 15+10+10+6.67+4.45 = 48ft.

Learn more about distance here:

https://brainly.com/question/13034462

#SPJ11

If you see Alice going to your left at exactly 0.99c and Bob going to your right at exactly 0.99, Alice will say that Bob is b) going away from her at exactly 0.99c.

According to special relativity, the laws of physics are the same for all observers in uniform motion relative to one another. This means that both Alice and Bob can consider themselves at rest and the other moving at a speed of 0.99c.

From Alice's point of view, Bob is moving away from her at a speed of 0.99c. This is because she sees Bob's velocity as the difference between his velocity relative to her and the speed of light, which is always constant. Therefore, Alice will say that Bob is going away from her at exactly 0.99c.

On the other hand, from Bob's point of view, Alice is also moving away from him at a speed of 0.99c. However, since the speed of light is constant for both observers, Bob will not see Alice moving away from him at a speed greater than 0.99c. This is because if Alice were to move away from him at a speed faster than this, she would be breaking the laws of physics as we currently understand them.

In summary, Alice will say that Bob is going away from her at exactly 0.99c, but Bob will not see Alice moving away from him at a speed faster than 0.99c. The correct option is b) going away from her at exactly 0.99c.

for more about  Alice and Bob

https://brainly.com/question/31491367

#SPJ11

The other contributing resonance structure for dimethylformamide (DMF) involves the nitrogen atom donating its lone pair of electrons to the carbonyl carbon, which leads to the formation of a double bond and the creation of a positive charge on the nitrogen.

This is shown by drawing a double-headed arrow between the nitrogen lone pair and the carbonyl carbon. The resulting molecule has a positive charge on the nitrogen atom and a double bond between the carbon and nitrogen atoms.

This resonance structure contributes to the stability of DMF because it allows for delocalization of the positive charge and electron density over multiple atoms, reducing the overall energy of the molecule. Additionally, this resonance form can interact with other molecules through hydrogen bonding or other interactions that are not possible in the main structure. By showing all lone pairs of electrons and charges, the resonance form on the right can be fully represented and understood. Overall, the presence of resonance in DMF contributes to its unique properties and reactivity in chemical reactions.

To know more about carbonyl carbon refer to

https://brainly.com/question/12308782

#SPJ11

During the simple harmonic motion of a pendulum, the velocity is greatest at the equilibrium point. The equilibrium point is the position at which the pendulum is at rest, and its potential energy is at its minimum.

At this point, the pendulum has the maximum amount of kinetic energy, which translates to the highest velocity. As the pendulum swings away from the equilibrium point, its velocity decreases, and the potential energy increases.

This decrease in velocity is due to the force of gravity acting on the pendulum, which causes it to slow down and eventually come to a stop at the maximum displacement point. As the pendulum swings back towards the equilibrium point, the potential energy is converted back into kinetic energy, and the velocity increases once again.

Thus, the velocity is greatest at the equilibrium point during the simple harmonic motion of a pendulum.

To know more about pendulum please visit....

brainly.com/question/31839277

#SPJ11

When considering the motion of a hoop and a disk rolling down a ramp without slipping, it is important to note that their mass and radius will have an impact on their speed and the time it takes to reach the end of the ramp.

As the hoop has all of its mass concentrated at its outer edge, it will have a larger moment of inertia compared to the disk. This means that it will require more energy to start moving and accelerate than the disk.

However, once it is in motion, the hoop will have a higher speed due to its larger radius and will therefore cover a greater distance in a shorter amount of time.

On the other hand, the disk has its mass more evenly distributed throughout its body and a smaller moment of inertia compared to the hoop.

This means that it will require less energy to start moving and accelerate than the hoop. However,

its smaller radius means that it will have a lower speed than the hoop and will therefore cover a shorter distance in a longer amount of time.

Therefore, in this scenario, the hoop will get to the end of the ramp first due to its larger radius and higher speed. However,

it is important to note that the exact time it takes for each object to reach the end of the ramp will depend on various factors such as the angle and length of the ramp, as well as the initial position and velocity of the objects.

To know more about mass and radius refer here

https://brainly.com/question/30297803#

#SPJ11

The overall resistance in the circuit decreases and the total current increases. The voltage across each resistor remains the same and the total power increases due to increased current flow.

A simple series circuit consists of a single pathway for the flow of electric current, where all components (such as resistors and batteries) are connected in a sequence, end-to-end. In this type of circuit, the total resistance is the sum of the individual resistances. When a second resistor is connected in parallel with the original resistor in the circuit, it creates an additional pathway for the flow of current. This results in a reduction in the total resistance of the circuit since the parallel combination of resistors provides a lower effective resistance than the original resistor alone. As a result, more current flows through the circuit. However, the voltage across both resistors remains the same as the original voltage provided by the battery.

Learn more about simple series circuits here:

https://brainly.com/question/30762848

#SPJ11

The motor turns the disk with an angular velocity of ω = (3[tex]t^{2}[/tex], 3t)rad/s, where t is in seconds.

Part A The magnitude of the velocity of point A at t = 3s is

|v| = r|ω| = r|(27, 9)| = r√([tex]27^{2}[/tex]+[tex]9^{2}[/tex])

Part B At t = 3s, αn = 3 rad/[tex]s^{2}[/tex], and the normal component of acceleration is

an = rαn = rαcos(90°) = -rα = -r(3) = -3r

Let's start with the given information

Angular velocity, ω = (3[tex]t^{2}[/tex], 3t) rad/s

To solve the problem, we need to find the velocity and acceleration of point A on the disk. We can use the following equations

v = rω (for velocity)

a = rα (for acceleration)

Where r is the distance of point A from the center of the disk, and α is the angular acceleration.

Part A

To find the magnitude of the velocity of point A when t = 3s, we need to find the value of ω at t = 3s, and then calculate the velocity using the above equation.

Given ω =  (3[tex]t^{2}[/tex], 3t) rad/s

At t = 3s, ω = (27, 9) rad/s

Let the radius of the disk be r. Then the velocity of point A is

v = rω

The magnitude of the velocity is

|v| = |rω| = r|ω|

We are given that the disk is rotating counterclockwise, so the velocity vector at point A is tangent to the circle, and has a direction perpendicular to the radius.

Therefore, the magnitude of the velocity of point A at t = 3s is

|v| = r|ω| = r|(27, 9)| = r√([tex]27^{2}[/tex]+[tex]9^{2}[/tex])

Part B

To find the magnitudes of the n and t components of acceleration of point A when t = 3s, we need to find the value of α at t = 3s, and then calculate the acceleration using the above equation.

Since the angular velocity is changing with time, we need to find the angular acceleration using the derivative of the angular velocity

α = dω/dt

Given ω =  (3[tex]t^{2}[/tex], 3t) rad/s

Differentiating with respect to t, we get

α = (6t, 3) rad/[tex]s^{2}[/tex]

At t = 3s, α = (18, 3) rad/[tex]s^{2}[/tex]

Let the tangential and normal components of acceleration be at and an respectively. Then, we have

a = rα = rat + ran

The tangential component of acceleration is given by

at = rαt

where αt is the tangential component of angular acceleration. Since the disk is rotating counterclockwise, the direction of αt is along the tangent to the circle at point A, and is perpendicular to the radius.

Therefore, at t = 3s, αt = 18rad/[tex]s^{2}[/tex], and the tangential component of acceleration is:

at = rαt = rαsin(90°) = rα = r(18) = 18r

The normal component of acceleration is given by

an = rαn

Where αn is the normal component of angular acceleration. The direction of αn is perpendicular to the tangent and the radius, and points towards the center of the circle.

Therefore, at t = 3s, αn = 3 rad/[tex]s^{2}[/tex], and the normal component of acceleration is

an = rαn = rαcos(90°) = -rα = -r(3) = -3r

Hence, the magnitudes of the tangential and normal components of acceleration of point A at t = 3s are

|at| = 18r

|an| = 3r

To know more about angular velocity here

https://brainly.com/question/15407837

#SPJ4

The Magnitude of the net force on the 10-N falling object encountering 4 N of air resistance would be 6N. This can be calculated by subtracting the force of air resistance (4N) from the force of gravity (10N), resulting in a net force of 6N.

This net force will determine the object's acceleration, which will be affected by factors such as its mass and the surface it is falling on. Understanding the concept of net force is essential in analyzing object encounters, as it helps us determine the overall effect of various forces acting on an object.

learn more about Magnitude here:

https://brainly.com/question/15681399

#SPJ11

In the context of the variation of blackbody emissive power with wavelength, the wavelength at which the peak occurs for a specified temperature is given by Wien's Displacement Law.

This law states that the wavelength of maximum emissive power (λ_max) is inversely proportional to the absolute temperature (T) of the blackbody. The formula for Wien's Displacement Law is:

λ_max = b / T

where b is Wien's displacement constant, approximately equal to 2.898 x 10^-3 m·K.

When a blackbody is heated, it emits radiation at various wavelengths. As the temperature increases, the peak of the emitted radiation shifts to shorter wavelengths. This is why objects appear to change color as they are heated, starting from dull red to yellow, and eventually to white as the temperature increases.

Wien's Displacement Law is important for understanding the relationship between a blackbody's temperature and the peak wavelength of its emitted radiation. It allows us to estimate the temperature of celestial bodies, such as stars, by analyzing their emitted radiation spectrum. By determining the peak wavelength of a star's radiation, we can use Wien's Displacement Law to estimate its temperature, which is crucial for understanding its characteristics and life cycle.

For more about Wien's Displacement Law:

https://brainly.com/question/28365925

#SPJ11

The mass fraction of 235U (3.0%) in the uranium is 6.0 MeV

Mass fraction is a way of expressing the amount of a particular substance in a mixture as a fraction of the total mass of the mixture. It is calculated by dividing the mass of the particular substance by the total mass of the mixture, and expressing it as a decimal or a percentage. Mass fraction is used in many industries and processes, such as chemical engineering, pharmaceuticals, food science, and metallurgy.

The question is asking for the energy released in the fission of 1.00 kg of uranium enriched to 3.0% 235U. The nuclear reaction they are referring to is the fission of 235U, which is expressed as:[tex]$$\ce{^{235}_{92}U - > ^{140}_{56}Ba + ^{95}_{36}Kr + 3n + Q}$$[/tex]
Where Q is the amount of energy released in the reaction. The Q value for this reaction is approximately 200 MeV. Therefore, the energy released in the fission of 1.00 kg of uranium enriched to 3.0% 235U is calculated by multiplying the Q value by the mass fraction of 235U (3.0%) in the uranium:

[tex]$$Energy released = Q \times \frac{mass\;fraction\;of\;235U}{100}$$[/tex]

[tex]$$Energy\;released = (200\;MeV) \times (3.0\%) = 6.0\;MeV$$[/tex]

To learn more about mass fraction
https://brainly.com/question/28236073
#SPJ4

A. the specific internal energy change can be 707.1 kJ/kg and B. the specific internal energy change can be 707.3 kJ/kg.

Internal energy is the sum of the kinetic and potential energies of the molecules of a system. It is the energy associated with the random motion of atoms or molecules in a system. It is also known as the thermal energy of a system and is denoted by U.

(a) For the PG model, the change in specific internal energy (∆u) is calculated by:
[tex]\Delta u = Cv * (T_2-T_1)[/tex]
where Cv is the specific heat capacity at constant volume and [tex]T_1[/tex] and [tex]T_2[/tex] are the initial and final temperatures, respectively.
For air at 300 K to 1000 K, the specific internal energy change can be calculated as follows:
[tex]\Delta u = 1.007 kJ/kg-K * (1000 K - 300 K)\\\Delta u = 707.1 kJ/kg[/tex]

(b) For the IG model, the change in specific internal energy (∆u) can be calculated using the IG system-state TEST calc. The specific internal energy change can be calculated as follows:

[tex]\Delta u = u_2-u_1,[/tex]
where u1 and u2 are the initial and final specific internal energy, respectively.
For air at 300 K to 1000 K, the specific internal energy change can be calculated as follows:
[tex]\Delta u = (1.080 kJ/kg) - (0.373 kJ/kg)\\\Delta u = 707.3 kJ/kg.[/tex]

To learn more about internal energy
https://brainly.com/question/30702359
#SPJ4

The speed of the car before impact was 6.22 m/s.


We can use the principle of conservation of mechanical energy to find the initial speed of the car before impact. Since no mechanical energy is transformed or transferred away during the impact, the initial mechanical energy of the car is equal to its final mechanical energy, which is zero since the car comes to rest after hitting the wall.

The initial mechanical energy of the car can be expressed as the sum of its kinetic energy and the elastic potential energy stored in the compressed bumper, where m is the mass of the car, v is its initial speed, k is the force constant of the bumper, and x is the compression distance of the bumper.

Setting the initial mechanical energy equal to zero and solving for v, we get:

1/2mv² + 1/2kx² = 0

Substituting the given values, we get:

1/2(4430 kg)v² + 1/2(6.00 x 10⁶ N/m)(0.0346 m)² = 0

Solving for v, we get:

v =√(-(1/2(6.00 x 10⁶ N/m)(0.0346 m)²)/(1/2(4430 kg)))

v ≈ 6.22 m/s

Therefore, the speed of the car before impact was 6.22 m/s.

To know more about principle of conservation of mechanical energy, visit:

https://brainly.com/question/3725754

#SPJ11

To answer this question, we need to use the formula I = P/V, where I is the current in amps, P is the power in watts, and V is the voltage in volts.

For the toaster, I = 1780/120 = 14.83 amps (long answer: The current drawn by the toaster is 14.83 amps.)

For the electric frying pan, I = 1300/120 = 10.83 amps (long answer: The current drawn by the electric frying pan is 10.83 amps.)

For the lamp, I = 70/120 =0.5 8 amps (long answer: The current drawn by the lamp is 0.58 amps.)

Since the devices are in parallel, the total current drawn from the outlet will be the sum of the currents drawn by each device.

Total current = 14.83 + 10.83 + 0.58 = 26.24 amps . The total current drawn from the outlet by all three devices is 26.24 amps.)

Since the circuit has a 15 amp capacity, this means that these three devices should not be used simultaneously on the same circuit.

I'd be happy to help with your question.

To calculate the current (in amperes) drawn by each device, you can use the formula:

Current (A) = Power (W) / Voltage (V)

For the 1,780 W toaster:
Current = 1,780 W / 120 V ≈ 14.83 A

For the 1,300 W electric frying pan:
Current = 1,300 W / 120 V ≈ 10.83 A

For the 70 W lamp:
Current = 70 W / 120 V ≈ 0.58 A

So, the current drawn by the toaster is approximately 14.83 A, by the electric frying pan is approximately 10.83 A, and by the lamp is approximately 0.58 A.

To know more about power visit:-

https://brainly.com/question/29575208

#SPJ11