what happens to the co2 that is produced in the reaction?

Answer:

Accuracy refers to how close the arrows are to the bull's eye, while precision refers to how close the arrows are to each other.

In this scenario, the archer's shots are precise but not accurate. The arrows are all within 1 cm of each other, which shows that the archer's shots are consistent and repeatable, but none of the arrows are within 30 cm of the bull's eye. This means that the archer's shots are accurate to a certain extent, but not accurate enough to hit the bull's eye.

To improve the accuracy of the archer, he/she could practice aiming at the bull's eye, and focusing on form and technique. The archer could also get feedback from a coach or mentor to understand what might be causing the arrows to land away from the bull's eye.

On the other hand, the archer's precision is good, and this can be maintained by regular practice and fine-tuning the aim and form. The archer should aim to keep the consistency of the shots and keep the arrows close to each other.

If metal x is lower than metal y in the activity series, then metal x replaces ions of metal y in a solution and loses electrons more readily than metal y.

The activity series or also known as the reactivity series is a list of elements that are arranged in the order of their decreasing reactivity. Because metals replace other metals and nonmetals replace other nonmetals, each has its own activity series.

Metals and halogens are ranked in the activity series based on their ability to displace other metals or halogens below them.

There are single replacement reactions occurring in nature that only occur when the element that is doing the replacement is more reactive than the element that is being replaced. Therefore, it is important for the activity series to exist.

There are elements placed in the activity series which react with cold water, steam, and even acids.

Learn more about replacement reactions here:

https://brainly.com/question/15995721

#SPJ4

The student that gave the correct response is student 3.

We know that there are three main subatomic particles that we can be able to find in the atom and these are;

We know that the electrons can be classified in to groups based on the valence electrons that the elements have and this is what we can be able to use to judge the reactivity of the atoms of the elements as we know in chemistry.

Hence, the valence electrons determine the chemical reactivity of the atom.

Learn more about valence electrons:https://brainly.com/question/28977387

#SPJ1

With the rising cost of energy and the growing demand for electricity, energy efficiency has become increasingly important.

Finding ways to reduce electricity usage and increase efficiency can save money in the long run, while also having a positive impact on the environment.

There are a number of different methods to help increase energy efficiency, such as using energy-efficient appliances, making sure your home is properly insulated, and utilizing energy-saving strategies such as turning off lights and unplugging appliances when not in use.

Additionally, you can take advantage of energy-saving programs offered by local utilities, or even install renewable energy systems such as solar panels.

By taking steps to become more energy efficient, you can help reduce your energy bills, protect the environment, and ensure a sustainable future.

To learn more about energy, click here:

https://brainly.com/question/1932868

#SPJ4

Thin layer chromatography (TLC) is an affinity derived approach that works to separate compounds in a mixture. TLC is deeply versatile separation method used for both qualitative and quantitative sample analysis.

In general, Thin layer chromatography is performed by using a thin, uniform layer of silica gel or alumina coated onto a piece of glass, metal or rigid plastic. These silica gel is present in stationary phase. There are three most important industrial applications that thin layer chromatography has are clinical, pharmaceutical, and food testing approaches. One of the most common specific types of clinical tests performed with TLC is for the presence of drugs of abuse.

To learn more about Thin layer chromatography , here

brainly.com/question/10296715

#SPJ4

The molar mass of H₂O is 18 g/ moles, in 2 moles there are 36 g.

A substance's atomic mass is essentially the sum of the masses of its protons and neutrons. A molecule may contain more than one atom; in this case, the molecular mass is the sum of the masses of all the atoms in the molecule. Now, the unit is transformed into grams for the number of moles (g).

For instance, we all know that the atomic mass of oxygen is 16 g/moles, the molecular mass of Hydrogen is 1 g/moles

so the mass molar of H₂O is 16g/moles +2 (1 g/moles) = 18 g/ moles so in 2 moles of H₂O there are 36 g

Learn more about mass molar at https://brainly.com/question/7585012

#SPJ4

The band of light rock is younger.

What rock has bands of light and dark minerals?

Granite is a type of rock that has bands of light and dark minerals. It is composed of two main minerals, quartz and feldspar, and can contain smaller amounts of othGranite is a common type of intrusive, felsic, igneous rock that is granular and phaneritic in texture. Granite is a common type of intrusive, felsic, igneous rock that is granular and phaneritic in texture. It is a very hard, durable rock that is resistant to erosion and weathering, making it a popular choice for construction and building materials. Granite is also popular for use in countertops, flooring, and other decorative applications.

The band of light rock is usually younger than the rock that surrounds it. This is because light rock is typically formed through a process of erosion, which requires time for the rock to wear away. On the other hand, the rock that surrounds the light rock is typically much older, often having been formed millions of years ago.

Hence, the band of light rock is usually younger.

To learn more about band of light rock from the link

https://brainly.com/question/14098376

#SPJ4

London Dispersion and Ion-dipoled intermolecular forces contribute to creating a solution of KBr in H₂O.

London Dispersion forces occur between all molecules and result from the fluctuating distribution of electrons in the molecules, leading to a temporary dipole moment. Dipole-dipole forces are attractive interactions between the positively charged end of one molecule and the negatively charged end of another molecule.

The underlying universal forces that cause attractive interactions between nonpolar molecules are Van der Waals or London dispersion forces. London dispersion forces (LDF), dipole-dipole interactions, and hydrogen bonds are the three different intermolecular forces. All substances at least have LDF, but molecules can have any combination of these three types of intermolecular interactions.

To know more about London Dispersion refer to: https://brainly.com/question/1454795

#SPJ4

Carbonyl peak in a ring as the size of the ring contracts will B. Peak wavenumber shifts right by 30 for every carbon atom removed  .

In general ,carbonyl group C=O is having a larger dipole moment and hence it is intense in stretching and vibration these peak generally appears from 1900 to 1600. As a result, an aromatic ring is attached to a carbonyl carbon, the C=O. Also a stretching peak position is lowered due to the phenomenon of conjugation.

Also , carbonyl group act in the functional role for diminishing the bonds within the carbon chain. That makes electronegative oxygen atom to attract more electrons with the carbon it is bonded and within the carbonyl group.

To learn more about carbonyl group , here

brainly.com/question/13564853

#SPJ4

The length of time it takes a competitor to cover a distance of 500 meters flat, the speed at 5 m/s is 100 seconds.

Speed ​​is a quantity that indicates how fast an object is moving. The International Unit of Speed ​​is m/s

Distance is a number that indicates how far an object changes position. The international unit of distance is the meter (m).

Time is the interval between two states/events, or it can be the duration of an event. Unit of Time seconds or seconds (s).

How to calculate the travel time, namely the distance traveled divided by the speed.

                                         t = s/v

Formula Description:

s = Distance traveled (m, km)

t = Travel time (hours, seconds)

v = Speed ​​(km/h, m/s)

Then the time needed is

t = s/v

t = 500m/ 5m/s

t = 100 seconds

Learn more about calculating travel time at https://brainly.com/question/26046491

#SPJ4

A buffer solution of diclofenac (pKa= 4.15) is buffered at ph 5.5.

The Henderson-Hasselbalch equation is commonly used to calculate the pH of buffer solutions. Buffers are made up of a weak acid and a conjugate base. As a result, for a generic weak acid, we could call it HA, and its conjugate base would be A-. To calculate the pH of the buffer solution, find the pKa of the weak acid and multiply it by the log of the conjugate base concentration divided by the concentration of the weak acid.

First, we need to know the pKa of the weak acid, which is acetic acid.The Ka value is less than one because acetic acid is a weak acid. To find the pKa of acetic acid, we take the negative log of the Ka value. So the negative log of 1.8 times 10 to the negative fifth is equal to 4.74. So we can go back to the Henderson-Hasselbalch equation and write that the pH is equal to the pKa, which we just calculated to be 4.74 plus the log of the concentration of the conjugate base.

And therefore, the pH of the buffer solution is less than the pKa of the weak acid. And in the third example, the concentration of the weak acid was less than the concentration of the conjugate base.

Learn more about Henderson-Hasselbalch equation here:

https://brainly.com/question/13423434

#SPJ4

216 grams of aluminum oxide will react 25. 0 grams aluminum

What Is Molar mass?

The mass in grams of one mole of a chemical is its molar mass. A mole is the measurement of the number of things, such as atoms, molecules, and ions, that are present in a substance. Any material has 6.022 x 1023 molecules in a mole.

Cookware made of anodized aluminum conducts heat just as effectively as cookware made of regular aluminum, but it has a firm, non-stick surface that makes it scratch-resistant, long-lasting, and simple to clean. Additionally, anodization lessens the amount of aluminum that leaches out of cookware and into foods, especially acidic foods like tomatoes and rhubarb.

4Al+3O2→2Al2O3

The number of moles of aluminium is 25/27 i.e. 0.93moles

4 moles of Al react with 3 moles of O2,

The mole ratio is 4:3.

So, we need (3/4)*0.93 mol= 0.69 mol of O2.

The molar mass of O2 (32 g/mol),

Required amount of oxygen will be 32*0.69g

2 moles of Al2O3 is produced by 4 moles of Al.

The mole ratio is 4:2 i.e. we need (2/4)*0.93 = 0.465 moles of Al2O3

102*0.465 = 216g of Al2O3 is needed.

To learn more about aluminium oxide use link below:

https://brainly.com/question/25869623

#SPJ4

(d.) ionic lattice hydrating. Because water's lattice energy and hydration energy differ from one another, ionic compounds dissolve in it. Ions with opposing charges attract each other, while ions with like charges repel one another.

Ionic substances are  ionic compounds. These ions are made up of atoms with an overall positive or negative charge as a result of electron gain or loss. Because they frequently lose electrons, metals acquire a net positive charge and change into cations. Non-metals frequently acquire electrons, giving anions a net negative charge. results in ionic, or electrovalent, compounds; they are best represented by the mixtures of nonmetals and alkali and alkaline-earth metals. A compound known as an ionic compound is one that is created when two oppositely charged ions come together to form a chemical bond, such as sodium chloride.

learn more about ionic compounds here:

https://brainly.com/question/9167977

#SPJ4

If metal X is lower than metal Y on the activity series, then: A are listed below.

What is metal?

Contrary to alloys, a chemical element is any of a wide range of opaque, fusible, ductile, and generally glossy materials that are good conductors of electricity and heat, yield basic oxides and hydroxides through the loss of electrons, and form cations.

What is ion ?

When ions are positively charged, we refer to them as cations. Ions with a negative charge are known as "anion" particles. Ions of several common substances can be found in the body. Salt, bicarbonate, potassium, calcium, and chloride are common examples.

Reactivity series, for instance, places copper (Cu) higher than silver (Ag). So, in a single replacement/displacement reaction, copper will replace/displace silver.

Cu(s) + 2AgNO 3 (aq) 2Ag(s) + Cu(NO3) 2 (aq)

Silver is positioned below copper in the reactivity series, hence the reverse reaction won't occur.

Cu(NO 3 ) 2 and Ag (s) don't react in aqueous form.

Therefore, if metal X is lower than metal Y on the activity series, then: A are listed above.

Learn more about metals from the given link.

https://brainly.com/question/9719018

#SPJ4

Using the expression of Clausius-Clapeyron equation we can calculate the vapor pressure. Putting all the values in the expression we get the result.

The vapor pressure can be defined as the force that an evaporating substance exerts against the walls of a sealed container. ln (P1/P2) = (ΔHvap. /R) (1/T2 - 1/T1). where, P1 and  P2 are the vapor pressures at two temperatures T and T2 . A solution made from 23.5 g of glycerin in 130 g of methanol at 50 °C. The vapor pressure of pure methanol at 50 °C is 400 torr. Clausius-Clapeyron equation allows to estimate the vapor pressure at another temperature if the vapor pressure is known at some temperature and if the enthalpy of vaporization is known. The partial vapor pressure of a component in a mixture is equal to the vapor pressure of the component at that temperature multiplied by the component's mole fraction.

To learn more about Vapor pressure please visit:

https://brainly.com/question/2272852

#SPJ4

Answer:

This is a timeline of subatomic particle discoveries, including all particles thus far discovered which appear to be elementary (that is, indivisible) given the best available evidence. It also includes the discovery of composite particles and antiparticles that were of particular historical importance.

More specifically, the inclusion criteria are:

Elementary particles from the Standard Model of particle physics that have so far been observed. The Standard Model is the most comprehensive existing model of particle behavior. All Standard Model particles including the Higgs boson have been verified, and all other observed particles are combinations of two or more Standard Model particles.

Antiparticles which were historically important to the development of particle physics, specifically the positron and antiproton. The discovery of these particles required very different experimental methods from that of their ordinary matter counterparts, and provided evidence that all particles had antiparticles—an idea that is fundamental to quantum field theory, the modern mathematical framework for particle physics. In the case of most subsequent particle discoveries, the particle and its anti-particle were discovered essentially simultaneously.

Composite particles which were the first particle discovered containing a particular elementary constituent, or whose discovery was critical to the understanding of particle physics.

Cellulose

Nitrocellulose

Wax

Nylon

Fatty acids

Mixed hydrocarbons

Any chemical compound that has carbon-hydrogen or carbon-carbon bonds is considered an organic compound.

Examples of organic compounds are:

Learn more about organic compounds at: https://brainly.com/question/20066589

#SPJ1

The SN2 reaction is a type of nucleophilic substitution reaction in which a nucleophile (Nu) attacks the carbon atom of a substrate (S) from the back side, causing the inversion of configuration and the formation of a new carbon-nucleophile bond.

To learn more about reaction rate refer:

brainly.com/question/12904152

#SPJ4

One mole of carbon dioxide ([tex]CO_{2}[/tex]) contains 6.022×10^23 molecules.

This number is referred to as Avogadro's number and it is the same for any substance.

To put it another way, one mole of a substance is equal to 6.022×10^23 atoms, molecules, or other particles of that substance. In the case of [tex]CO_{2}[/tex], a one mole sample contains 6.022×10^23 molecules.

To explain further, when the number of molecules of a substance is known, the mass of that substance in grams can be determined.

The mass of one mole of carbon dioxide, [tex]CO_{2}[/tex] is 44.01g, which means that one mole of [tex]CO_{2}[/tex] contains 44.01g/6.022×10^23 molecules or 7.316×10^-23g/molecule. This is the average mass of a [tex]CO_{2}[/tex] molecule.

To learn more about molecules, click here:

https://brainly.com/question/19922822

#SPJ4

9.32 grams of W and 4.66 grams of X are required to make the required amount of z.

What is a compound?

A compound is a material created by the chemical joining of two or more distinct components. Examples of compounds are table salt (NaCl), which is formed of the elements sodium and chloride, and water (H2O), which is made of the elements hydrogen and oxygen.

Given;

Mass of Z = 14 grams

W:X:Y = 2:1:3

4 grams of W and 2 grams of X are required to make 6 grams of Y

W:X = 4:2 = 2:1

Substituting the composition of Y to Z

Z = W:X:Y = 2:1:3

We have;

Z = W:X = 4:2 = 2:1

The final mixing ratio for W and X are 2:1,

To make 14 grams of Z, we need;

W = 2/3 × 14grams = 28/3 grams

W = 9.33 grams

X = 1/3 × 14grams = 14/3 grams

X = 4.67 grams

To learn more about compounds use link below:

https://brainly.com/question/26487468

#SPJ4

Answer:

Although amino acids may have other formulas, those in protein invariably have the general formula RCH(NH2)COOH, where C is carbon, H is hydrogen, N is nitrogen, O is oxygen, and R is a group, varying in composition and structure, called a side chain.

Explanation:

(⁠◕⁠ᴗ⁠◕⁠✿⁠)(⁠◕⁠ᴗ⁠◕⁠✿⁠)(⁠◕⁠ᴗ⁠◕⁠✿⁠)

Alcohols are organic compounds that contain a hydroxyl (-OH) group bonded to a carbon atom. They can be classified as primary, secondary, or tertiary based on the number of carbon atoms bonded to the carbon atom bearing the hydroxyl group.

Reactions of alcohols include:

Dehydration - the removal of water from the alcohol to form an alkene or alkyne.

Oxidation - the process by which the alcohol is converted into a more highly oxidized compound such as a carboxylic acid or a ketone.

Substitution - the replacement of the hydroxyl group with another group, such as a halogen.

Esterification - the reaction of an alcohol with a carboxylic acid to form an ester.

Synthesis of alcohols can be done through a variety of methods including:

Hydrolysis of alkyl halides or alkyl sulfates.

Reduction of aldehydes, ketones, or carboxylic acids.

Fermentation of sugars using yeast or bacteria.

Grignard reaction - the addition of a Grignard reagent (a Organo magnesium compound) to a carbonyl compound.

To know more about organic compounds, visit:

https://brainly.com/question/5994723

#SPJ1

The speed of the football player in yards per seconds is 3.10 yard line per second.

Speed refers to the rate of motion or action, specifically the magnitude of the velocity. It is the rate distance is traversed in a given time.

This suggests that the speed can be calculated by dividing the distance of the football player by the time taken.

According to this question, the football player runs in a straight line down the field, crossing the 20-yard line when the stopwatch reads 12 seconds and crossing the 70-yard line when the stopwatch reads 17 seconds.

Speed = 90 ÷ 29 = 3.10 yard line/seconds

Learn more about speed at: https://brainly.com/question/12759408

#SPJ1

To solve this we must be knowing each and every concept related to mole and  and its calculations. Therefore, 388.15g  is the mass of 3.5 moles of CaCl[tex]_2[/tex].

A mole is merely a measuring unit. In reality, it is one of International System of Units' seven foundation units (SI). When basically determines are insufficient, new units are created.

Chemical reactions frequently occur at levels that use grams would be inappropriate, but using actual figures of atoms/molecules/ions would also be misleading.

It's much easier to write' mole' than '6.02x10²³' whenever you wish to refer to a huge number of things. That is essentially why and how this particular component was created.

mole =given mass ÷ molar mass

moles of CaCl[tex]_2[/tex] = 3.5 moles

Molar mass of CaCl[tex]_2[/tex] =110.9g/mol

mass of  CaCl[tex]_2[/tex] =3.5 moles × 110.9g/mol

                        =388.15g

Therefore, 388.15g  is the mass of 3.5 moles of CaCl[tex]_2[/tex].

To know more about mole, here:

brainly.com/question/15209553

#SPJ1

The size of micropipette that you would select to deliver 215 microliters would be a micropipette with a volume range of 200-1000 microliters.

What is a micropipette?

A micropipette is a laboratory instrument used to measure and dispense small volumes of liquid, typically in the range of microliters (µL) or nanoliters (nL). They are commonly used in chemistry, biology, and biochemistry experiments, as well as in clinical and industrial settings.

Micropipettes consist of a handle, a digital or manual volume adjustment mechanism, and a tip that is placed into the liquid to be dispensed. They work by creating a vacuum or positive pressure inside the tip, which draws or pushes the liquid out of the tip.

Micropipettes come in different volume ranges and it is important to select the right one to ensure accurate delivery of the desired volume. For example, a micropipette with a volume range of 2-10 microliters would not be suitable for delivering 215 microliters, while a micropipette with a volume range of 200-1000 microliters would be more appropriate.

It's also important to note that, even if the micropipette is able to deliver 215 microliters, you should always check the calibration of the micropipette before use, to make sure that it's delivering the correct volume.

Hence, a micropipette with a volume range of 200-1000 microliters is suitable to deliver 215 microliters.

To learn more about a micropipette from the given link:

https://brainly.com/question/28425080

#SPJ4

25000 J or 25kJ   is the kinetic energy of a 2000 kg ball moving at 5 m/s.

KE= [tex]\frac{1}{2}[/tex]m[tex]v^{2}[/tex]

Kinetic energy is equal to  [tex]\frac{1}{2}[/tex]  * mass *  [tex]velocity^{2}[/tex].

where kg represents kilogrammes and mass

Its speed is measured in metres per second (m/s).

here, m= 2000

v = 5

[tex]\frac{1}{2}[/tex]m[tex]v^{2}[/tex]  =  1/2 ⋅2000 ⋅ 25

= [tex]\frac{50000}{2}[/tex]

= 25000

KE = 25000 J or 25kJ

Kinetic energy is the energy an object has while in motion. An object can only be accelerated by the application of a force. Applying force requires effort on our part. Energy is transmitted to the object once the work is accomplished, at which point it moves at a new, constant speed. Kinetic energy is a type of energy present in moving particles or objects. For such more questions on Kinetic energy:

brainly.com/question/15764612

#SPJ4

13.015  grams of acetylene (C2H2) are required to produce 1.0 moles of CO2.

To find the number of grams of acetylene (C2H2) required to produce 1.0 moles of CO2, we can use the balanced equation for the combustion of acetylene: 2C2H2(g) + 5O2(g) → 4CO2(g) + 2H2O(g)

From the balanced equation, we know that for every 2 moles of C2H2 that react, 4 moles of CO2 are produced. Therefore, if we want to produce 1.0 moles of CO2, we need to react 1.0 moles of CO2 / 4 moles CO2/ 2 moles C2H2 = 0.5 moles of C2H2.

To convert moles to grams, we use the molar mass of C2H2 which is 26.03 g/mol

So, 0.5 moles of C2H2 = 0.5 x 26.03 g/mol = 13.015 g C2H2

Therefore 13.015  grams of acetylene (C2H2) are required to produce 1.0 moles of CO2

For more questions like Acetylene click the link below:

https://brainly.com/question/26432975

#SPJ4