What is 20 newton in KG?.

An outside observer at rest would observe the spaceship decreasing in length and its clock ticking slower, as the spaceship approaches the speed of light.

A spaceship is a craft designed for interplanetary or interstellar travel. Spaceships are typically propelled by some form of energy, such as chemical propulsion, nuclear propulsion, or even solar sails. These craft usually have the capability to travel far and fast, allowing them to explore and even colonize distant planets and star systems. Most modern spaceships are heavily computerized, with computers controlling all aspects of the craft, from navigation to propulsion. They are also equipped with life support systems that can sustain long-term space travel, such as air and water recycling systems, airlocks, and temperature control. Some of the most advanced spaceships are equipped with artificial intelligence, allowing them to navigate autonomously and even make decisions on their own.

To learn more about spaceship

https://brainly.com/question/15992164

#SPJ4

The highest order number that can be observed with a grating is determined by the equation:

mλ = d(sin θ + sin θi)

where m is the order number, λ is the wavelength of light, d is the spacing between the lines on the grating, θ is the angle of incidence, and θi is the angle of diffraction.

Given that the grating has 1555 lines/cm, and the wavelength of light is 565 nm, we can use this equation to find the highest order number:

mλ = d(sin θ + sin θi)

m = d / λ

m = 1555 lines/cm / (565 nm/1cm)

m = 2.76

The highest order number that can be observed with this grating is 2.76. It's noteworthy that the order number is a positive number and it will not be a whole number, this means that it's not possible to observe the order number exactly 2.76 but it's the highest possible number that can be observed.

Answer:

11

Explanation above

An object's momentum can be increased by increasing its mass or velocity. As can be seen, momentum is directly proportional to an object's mass and velocity. So either of the two can be increased to gain momentum.

The quantity of motion of the body is defined as momentum. It is measured by "mass velocity," because momentum depends on velocity, and it also depends on the direction of the body's motion. Because velocity is a vector and mass is a scalar variable, momentum is a vector quantity. Momentum is defined as mass multiplied by velocity. Because all objects have mass, when they move, they have momentum - their mass is in motion. Momentum is a body's "power" when moving, showing how much force it can apply on another body. For example, a bowling ball (big mass) travelling slowly (low velocity) can have the same momentum as a baseball (small mass) thrown swiftly (high velocity).

Here,

The momentum of an object can be increased by increasing its mass or velocity. As can be seen, momentum is proportional to mass and velocity of an object. To gain momentum, either of the two can be increased.

To know more about momentum,

https://brainly.com/question/6271830

#SPJ4

The 12i, 8j, and 24k vector's magnitude is 28.

A vector's length is considered to be its magnitude. The vector's absolute value or its modulus are other names for it. Using the Pythagorean theorem, we can determine a vector's magnitude.

A vector's magnitude, represented by the symbol |v|, is used to determine a vector's length. The distance between the vector's beginning point and endpoint is what this amount essentially represents. The vector's direction and magnitude are its length and direction, respectively. It only takes a few basic steps to calculate a vector's magnitude.

Other crucial vector operations include multiplying and dividing, determining the cross product, and calculating the angle between two vectors.

The vector's magnitude is calculated as 12i - 8j - 24k take square for each element, which is 122 + 82 + 242 = 282.

square root of 282 once more

Once you have this, the magnitude is 28.

Learn more about magnitude Visit: brainly.com/question/3184914

#SPJ4

Correct Question:

What is the magnitude of the vector, 12i – 8j – 24k ?

Ceres has a radius of 476 kilometers, which is 1/13 the radius of Earth. If the Earth were the size of a nickel, Ceres would be the size of a poppy.

Ceres is the dwarf planet in the inner solar system. Ceres is a rock-and-ice object with a diameter of 950 km and is the smallest dwarf planet ever discovered. Ceres' mass is one-third the mass of the asteroid belt between the orbits of Mars and Jupiter. Ceres was discovered by the Italian astronomer Giuseppe Piazzi on January 1, 1801 and was classified as an asteroid at the time, but it was the first asteroid discovered.

As a planet, On August 24, 2006, the International Astronomical Union (IAU) decided to change Ceres to a "dwarf planet" along with Pluto, Sedna, and Makemake in the Kuiper belt.

For more information about asteroids, visit https:

//brainly.com/question/19161842.

#SPJ4 

The weight of the object of mass 50 kg on Earth is 490 N.

The amount of substance contained in a thing is defined as its mass. The kilogram is its SI unit (kg). The amount of force with which an object is attracted by the earth is defined as its weight. The SI unit of weight is Newton(N).

We have:

Mass of object (m)

m = 10 kg.

Gravitational acceleration on earth (g)  = 9.8m/s²

Weight(W)= mg  N

⇒ W = 50 kg × 9.8 m/s²

⇒ W = 490 N

Therefore, the weight of the object of mass 50 kg on earth is 490 N.

Learn more about Gravitational Field here:

https://brainly.com/question/3639812

Answer:

2.9s

Explanation:

When object was dropped from some height, it displacement

h=v_i t+(at^2)/2=(gt^2)/2

So

t=√(2h/g)=√((2×42)/9.8)=2.9 s

The magnitude of a vector minus another vector B is not defined, as vectors have both magnitude and direction and cannot be subtracted from one another.

The magnitude of a vector minus another vector B is not defined, as vectors have both magnitude and direction and cannot be subtracted from one another. If you would like to find the difference between two vectors, you can subtract their components (x,y,z) individually.

Also you can find the distance between them by doing vector subtraction and then finding the magnitude of the resultant vector.

To describe the difference between two vectors A and B, you can subtract their individual components. For example, if vector A has components (x1, y1, z1) and vector B has components (x2, y2, z2), the difference between the two vectors would be described by the following:

(x1 - x2, y1 - y2, z1 - z2)

This resulting vector is often referred as A-B.

Alternatively, you can also find the distance between two vectors A and B by taking the Euclidean distance between their tail points, which is the square root of the sum of the squares of the differences of the x, y, and z components. This is known as the magnitude of the vector A-B.

Learn more about Vector Subtraction Magnitude here:

https://brainly.com/question/27870005

#SPJ4

The weight of the transformer is 138.46 N.

Weight can be calculated by dividing workdone by height

To calculate the weight of the transformer, we use the formula below.

Formula:

Where:

Substitute these values into equation 1

Learn more about weight here: https://brainly.com/question/28704035

#SPJ1

The kid's speed at the bottom of the slide is 8 m/s.

To learn more about potential energy refer to:

https://brainly.com/question/14427111

#SPJ1

Torque is calculated using the following formula: Torque = (3*EMF2)/ (4*pi*Synchronous Speed*Reactance). When the rotor rotates at its fastest speed, the maximum running torque occurs.

It achieves mathematical equivalence between rotor reactance per phase and rotor resistance per phase. Torque is spelled with the letter T. This scenario is conceivable if the value of the denominator shown below equals zero. The maximum torque is thus produced when, while the motor is running, the rotor reactance per phase is equal to the rotor resistance per phase. When the value of sX 20 = R 2 is entered, equation (1) is transformed into the equation for maximum torque. The rotor's stationary reactance and maximum torque are inversely connected.

Learn more about Torque here

https://brainly.com/question/6855614

#SPJ4

Mass does not depend on density. Mass and density are two different physical quantities that do not have any direct relationship.

Mass is a scalar quantity that measures the amount of matter in an object and is independent of its location or motion. It is the total amount of matter in an object, and it doesn't change when the object is compressed or expanded.

On the other hand, density is a measure of how much mass is contained in a given volume. It is defined as the ratio of the mass of an object to its volume. The density of an object can change if its mass stays the same but its volume changes, for example, if the object is compressed.

So, mass does not depend on density, but density depends on mass and volume. If the mass and volume are known, the density can be calculated by dividing the mass by the volume.

Learn more about mass:

https://brainly.com/question/19694949

#SPJ4

Self-ignition, also known as pre-ignition, occurs in an internal combustion engine when the fuel-air mixture in the combustion chamber ignites before the spark plug fires.

One way to avoid pre-ignition is to limit the compression ratio of the engine, as a higher compression ratio can lead to higher temperatures in the combustion chamber.

The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

The compression ratio of an engine is the ratio of the volume of the combustion chamber when the piston is at the bottom of its stroke (the "swept volume") to the volume of the combustion chamber when the piston is at the top of its stroke (the "clearance volume").

Given that the temperature at which self-ignition would occur using a certain brand of petrol is 350°C, and assuming that the ideal gas law applies, we can calculate the highest compression ratio that may be used to avoid pre-ignition.

To do this, we need to know the initial temperature and pressure in the combustion chamber, as well as the final temperature and pressure after compression. We can then use the ideal gas law to calculate the compression ratio.

In conclusion, based on the information provided, it is possible to calculate the highest compression ratio that may be used to avoid pre-ignition in an engine using the ideal gas law. However, more specific information such as the initial temperature and pressure and the specific brand of petrol is needed for a more accurate calculation.

Learn more about ignition at

https://brainly.com/question/6481027

#SPJ4

The time it takes for the sandbag to reach the ground would depend on the height from which it was released.

To find out how long it takes for the sandbag to reach the ground, we can use the equation of motion for a vertically falling object under the influence of gravity:

s = v0*t + (1/2)gt^2

where s is the distance fallen, v0 is the initial velocity (which is 0 m/s for the sandbag), t is the time elapsed, and g is the acceleration due to gravity (approximately 9.8 m/s^2).

We know that the sandbag is being released from the balloon and has an upward acceleration of g/4. So, the equation of motion becomes

s = v0t + (1/2)(g - g/4)*t^2

We also know that s is the distance fallen to the ground, which we can take as the final distance.

Now solving the equation for t

t = sqrt(2*s/(g-g/4))

It is given that the magnitude of the upward acceleration is g/4, so (g-g/4) = 3g/4, so the final equation becomes

t = sqrt(2*s/(3g/4))

To learn more about gravity

https://brainly.com/question/14874038

#SPJ4

Conduction, and radiation are the two mechanisms through which thermal energy is transferred. Conduction is the process of transferring heat energy from molecules in close proximity to one another.

Conduction is the method through which heat is transferred through solids without the actual particles moving. Convection is the process of heat transfer in fluids (liquids and gases) accompanied by actual particle movement.

Basically, heat transmission takes place when a body's temperature rises and falls. Three mechanisms, namely conduction, convection, and radiation, may be used to transport heat from one body to another. We need to understand the three ways that energy is transferred: convection, radiation, and conduction.

Learn more about thermal energy Visit: brainly.com/question/19666326

#SPJ4

Because momentum is a vector, a system's total momentum might be 0 if there are numerous masses. A system comprising two objects having the same amount of momentum and travelling directly toward one another, for example, will have a total momentum of zero.

Momentum is defined as a body's amount of motion. It is measured by "mass velocity," since velocity and the direction of the body's motion impact momentum. Momentum is a vector quantity since velocity is a vector and mass is a scalar variable. Momentum is defined as the product of mass and velocity. Because all objects have mass, they have momentum as they move - their mass is in motion. Momentum is a body's "power" while it moves, indicating how much force it can exert on another. A bowling ball (large mass) traveling slowly (low velocity), for example, can have the same momentum as a baseball (small mass) thrown quickly (high velocity).

Here,

Because momentum is a vector, the overall momentum of a system might be 0 if there are numerous masses. A system consisting of two objects having the same amount of momentum and travelling in the same direction, for example, will have a total momentum of zero.

To know more about momentum,

https://brainly.com/question/6271830

#SPJ4

(a) The maximum torque the crane can withstand is 16,691.2 N m.

(b) The maximum load of the crane is 956.1 N.

What is the maximum torque the crane withstand

The maximum torque the crane can withstand if the maximum load the crane can handle is 864 N is calculated as follows;

τ = rF x cosθ

where;

The maximum torque the crane can withstand is calculated as follows;

τ = 20 m x 864 N x cos (15)

τ = 16,691.2 Nm

The maximum load of the crane is calculated as follows;

F = τ  / rcosθ

F = ( 16691.2 ) / ( 20 x cos 29.2 )

F = 956.1 N

Learn more about maximum torque here: https://brainly.com/question/6845979

#SPJ1

The moving charge from point A to point B, the electric force that has done work is 2.08 J.

The work done by the electric force exchanges with the amount of charge transferred and exchanges with the potential difference between the starting and destination points.

To complete the task, we must find out the potentials at nodes A and B. Then we can calculate the electric potential energy of the charge Q 3 in these places. The work done by the electric force by moving the charge from A to B is equal to the difference in the electric potential energy.

To answer this question, we use the following formula:

W = Q3 (Q1-Q2)/4πε₀ (1/a - 1/b)

Numerical substitution:

Q3 = -3. 1 μC = -3.1 x 10⁻⁶C

Q1 = -5.6 μC = -5.6 x 10⁻⁶C

Q2 = 3.4 μC = 3.4 x 10⁻⁶C

a = 3 cm = 3 x 10⁻² m

b = 4 cm = 4 x 10⁻² m

ε₀ = 8.85 x 10 ⁻¹² C²N⁻¹m⁻² (from the table)

W = Q3 (Q1-Q2)/4πε₀ (1/a - 1/b)

W = -3.1 x 10⁻⁶C (-5.6 x 10⁻⁶C - 3.4 x 10⁻⁶C)/4π8.85 x 10 ⁻¹² (1/0.03 - 1/0.04)

W = -3.1 x 10⁻⁶C (-9 x10⁻⁶C)/4π8.85 x 10 ⁻¹² (1/0.03 - 1/0.04)

W = 27.9 x 10⁻¹² C/4π8.85 x 10⁻¹² (8,3)

W = 27.9 x 10⁻¹² C/111,25 x 10⁻¹² (8,3)

W = 0,25 x 8,3

W = 2.08 J

Thus, moving the charge from point A to point B, the electric force that has done work is 2.08 J.

Your question is incomplete but most probably your full question was:

Three charges are positioned on the corner of a rectangle shown with charge Q1 = -5.6 μC, Q2 = 3.4 μC, and q = -3.1 μC. The side lengths of the rectangle are a = 3 cm and b = 4 cm. How much work must be done by the electric force to move charge Q3 diagonally from point A to point B?

Learn more about work on the electric force at https://brainly.com/question/25923373
#SPJ4

iv. Socioeconomic and political  whether or not the following are systems of power and meaning that anthropologists study through intensive fieldwork and the observation of people 's everyday lives

A subculture or group that has a common culture is the subject of ethnographic study, with the goal of creating detailed and comprehensive descriptions of the community. When doing an ethnographic study, the researcher will watch the group, describe, and then analyse the ingrained patterns.

The fundamental benefit of ethnography is that it allows the researcher to see a group's customs and culture up close. It is an effective strategy for learning firsthand about the behaviours and interactions of individuals in a certain setting.

learn more about ethnography

https://brainly.com/question/25575567

#SPJ4

After then, the meteorite accelerates quickly to achieve its terminal speed, which is between 200 and 400 miles per hour (90 to 180 meters per second).

The meteorite then swiftly reaches its final velocity, which is between 200 and 400 miles per hour (90 to 180 meters per second). The terminal velocity is the speed at which the acceleration caused by gravity is precisely cancelled out by the deceleration caused by atmospheric drag.

Researchers first classify the sort of rock in their investigation before dating the meteorite to ascertain its origin. Nakhla indicated that it originated 1.3 billion years ago, a significant amount of time after the majority of other meteorites, which date from the Solar system's creation, 4.56 billion years ago.

Meteorites are priced and sold by the gram because they are so rare. Price is influenced by a number of factors, including demand, scarcity, supply, specimen size, specimen quality, and preparation effort. The average cost per gram of a common iron meteorite is between US$0.50 and US$5.00.

Therefore, the correct answer is option d) a typical meteorite's weight, surface area, and coefficient of drag.

To learn more about meteorite refer to:

https://brainly.com/question/21295570

#SPJ1

The vectors 2i+3j+k and 3i+2j+k have a cross product of i+j-5k.

The cross product of two vectors in three dimensions is a binary operation. The result is a vector that is perpendicular to both vectors. The two vectors a and b are combined to form the symbol A B.

There are two vectors: 3i+2j+k and 2i+3j+k.

Finding the cross product of two separate vectors is required.

i(3×1 -2×1) -j(2×1 -3×1)+k(2×2-3×3)

= i(3-2)-j (2-3) +k (4-9) (4-9)

=i+j-5k

Any two vectors' cross product will always show how far apart they are from one another in a given direction. cross product of two vectors, always in three dimensions. Any two or three vectors can be crossed to always produce a vector.

The result of two vectors is therefore =i+j-5k.

Learn more about cross product Visit: brainly.com/question/14542172

#SPJ4

Correct Question:

What will be the cross product of the vectors 2i + 3j + k and 3i + 2j + k?

The power of a hairdryer with a current of 4A and a resistance of 60Ω is 240W (watts).

Resistance is the opposition to the flow of electric current or the process of slowing down the flow of electric current. It occurs when electrons collide with atoms in a conductor, such as a wire. Resistance is measured in ohms and is determined by a material's electrical properties, like its cross-sectional area, length and type. Resistance can be used to control the amount of current in a circuit. It can also be used to convert electrical energy into thermal energy.

This is calculated by multiplying the current (4A) by the voltage (V = I x R, so V = 4A x 60Ω = 240V) and then multiplying the voltage by the current (240V x 4A = 240W). The power of a hairdryer is measured in watts and is the rate at which energy is used by the appliance. The higher the wattage, the more powerful the hairdryer will be.

To know more resistance click-
https://brainly.com/question/17563681
#SPJ4

The law of gravitation is allegedly called the Newton's 4th law. This law gave the world a breakthrough in understanding the universe in a better way.

Newton's law of gravitation states that every object attracts every other object in the universe with a force, called gravitational force. This force is directly proportional to the product of the masses of both the object and inversely proportional to the square of the distance between them. Mathematically it is described as:

F = GmM/R²

Where, F is the gravitational force, G is the universal gravitational constant, M & m are the masses of the objects and R is the distance between the objects.

To know more about gravitation, here

https://brainly.com/question/12528243

#SPJ4

The combined mass of the Cessna and passengers is 44.9 kg.

The quantity of matter in an object is expressed in terms of mass. It is typically measured in kilograms or grams, though other units such as pounds or ounces can also be used. Mass is distinct from weight, which is a measure of the force of gravity acting on an object. Mass is an inherent property of an object and does not depend on the environment or gravity, while weight is affected by gravity and can change depending on location.

The combined mass of the Cessna and passengers can be found by using the equation for potential energy, PE = mgh, where m is the combined mass, g is the h is the height, g is the gravitational acceleration. Rearranging the equation to solve for m, we get m = PE/gh. Plugging in the given values, we get m = 860 J/(2 km x 9.8 m/s2), which equals 44.9 kg. Therefore, the combined mass of the Cessna and passengers is 44.9 kg.

To learn more about mass

https://brainly.com/question/19385703

#SPJ4

The sum of an object's individual vector velocities is its final velocity. The scalar product of an object's mass and its acceleration vector is equal to the sum of its vector forces.

Formula 2: To get the resultant vector, subtract vectors moving in opposite directions from one another. R is the resulting vector because the vector B moves in the opposite direction of the vector A in this case.

As a result, we can directly use the equations v tot = v x 2 + v y 2 and v tot = v x 2 + v y 2 to perform the addition of the two velocities.

Definition: Velocity. The velocity vector is the derivative of the position vector if r(t) is a differentiable vector-valued function that represents the particle's position vector at time t. v(t)=r′(t)=x′(t)ˆi+y′(t)ˆj+z′(t)ˆk.

To learn more about vector velocities here:

https://brainly.com/question/13492374

#SPJ4

No one rated this answer yet — why not be the first?

BobbieRan

Expert

1.5K answers

26.1K people helped

Answer

The relative velocity of the motor boat =5.59 m/s in 26.5° East south direction.

Time for the boat to travel shore-shore  = 16. sec

The distance traveled downstream is 40 m.

The Scenario Depicts about the Calculations of Relative Velocity

What is Relative Velocity?

When two objects A and B are thought of as moving at velocities Va and Vb relative to a shared fixed frame of reference, such as the ground, a bridge, or a fixed platform

The velocity of an object in relation to another observer is known as its relative velocity. It is the pace at which one object's relative location changes in relation to another object over time

V → = V A B → + V B C → Where. VAB is the velocity with respect to A and B, VBC is the velocity with respect to B and C and VAC is the velocity with respect to A and C.

Given,

A motorboat traveling 5 m/s, East.

encounters a current traveling 2.5 m/s, South.

the resultant velocity of the motor boat =  =5.59 m/s in 26.5° East south direction

time does it take the boat to travel shore to shore = 80/ 5

= 16. sec.

The distance traveled downstream is d = v • t = (2.5 m/s) • (16 s) = 40 m.

To know more about Relative Velocity,Refer To:

brainly.com/question/17228388

#SPJ1

Total Cost is =  $107,380 if The farm is 340 acres and had corn planted  add fertilizer to the soil before you plant this years' crop.

A fertiliser is a natural or artificial substance containing chemical elements (such as Nitrogen (N), Phosphorus (P) and Potassium (K)) that improve growth and productiveness of plants. Some synonyms include the terms "enrichment" or "plant nutrient".

Without fertilizers, nature struggles to replenish the nutrients in the soil. When crops are harvested, important nutrients are removed from the soil, because they follow the crop and end up at the dinner table. If the soil is not replenished with nutrients through fertilizing, crop yields will deteriorate over time.

To know more about fertilizer visit

brainly.com/question/14012927

#SPJ1

An object in motion continues to move at a constant speed and in a constant direction because there is no outside force acting upon it to change its speed and direction.

According to the first law of Newton, an object remains at rest or moves at a constant speed in a constant direction unless it is acted on by an unbalanced force or outside force.

Newton's first law of motion signifies that an object in motion is continued to be moving at a constant speed and in a constant direction.; only an outside force can change the speed and direction of the object. According to this law, if an object is at rest, it remains at rest, unless an outside force is applied on it.

You can learn more about Newton's first law of motion at

https://brainly.com/question/1222214

#SPJ4