Write a program that takes as input: - the current hour - the number of hours to add and outputs the new hour. For example, if the inputs are 2 (as the current hour) and 51 (as the number of hours to add), your program should output the answer from part (a) of this problem. Note that your program should always output an integer between 1 and 12.
Here's an algorithm for the program you described:
If the new hour is greater than 12, subtract 12 from it.
If the new hour is less than or equal to 0, add 12 to it.
The AlgorithmRead the current hour and the number of hours to add as input.
Calculate the new hour by adding the current hour and the number of hours to add.
If the new hour is greater than 12, subtract 12 from it.
If the new hour is less than or equal to 0, add 12 to it.
Output the new hour.
This algorithm ensures that the output is always an integer between 1 and 12, regardless of the current hour and the number of hours to add.
Read more about algorithm here:
https://brainly.com/question/29674035
#SPJ1
This Assignment is a report-based assignment. Besides other materials like journal papers, report, and research articles, students are advised to read chapter I to chapter 3 thoroughly from the book prescribed for this course. Students must use proper references to justify their assignment work. The Assignment structure is as follows: A. Introduction: (7.5 Marks) Discuss the concept of knowledge management. Why is knowledge management important today? (300-500 Words) (2.5 Mark) - Write a detailed paragraph on three generations on knowledge management. (450-750 Words) (3 Marks) Describe the terms, Data, Information and Knowledge. Discuss two major types of knowledge. Compare the properties of these two major types of knowledge. (400-500 Words) (2 Mark) B. Knowledge management cycles and Models: (7.5 Marks) Discuss in detail Wiig's KM cycle. How is it different from McElroy's KM cycle. Write minimum two points of difference. (Minimum 500 words) (2.5 Mark) - Describe how the major types of knowledge (i.e., tacit and explicit) are transformed in the Nonaka and Takeuchi knowledge spiral model of KM. Use a concrete example to make your point (e.g., a bright idea that occurs to an individual in the organization). (2 Mark) a. Which transformations would prove to be the most difficult? Why? (0.5 Mark) b. Which transformation would prove to be fairly easy? Why? (0.5 Mark) References: (2 Marks). 0 Mark for No references, Less than 5 References (1 Mark) More than 5 references 2 Marks.
IntroductionThe concept of knowledge management is the management of knowledge and information in an organization. This includes the identification, capture, creation, sharing, and management of knowledge and information assets.
Knowledge management is important today because it can help organizations to improve their performance and competitiveness by leveraging their knowledge and information resources. It can also help them to innovate and adapt to changing environments. The three generations of knowledge management are discussed below. The first generation of knowledge management focused on the capture, storage, and retrieval of knowledge. This generation was characterized by the use of technology to create databases and other knowledge repositories. The second generation of knowledge management focused on the creation, sharing, and dissemination of knowledge. This generation was characterized by the use of collaborative technologies such as groupware and knowledge-sharing platforms. The third generation of knowledge management focuses on the creation of new knowledge and innovation. This generation is characterized by the use of social media and other web-based technologies to foster creativity and collaboration.Knowledge ManagementIn the context of knowledge management, data refers to raw facts and figures that have not been processed or organized in any way. Information refers to data that has been processed or organized to make it meaningful. Knowledge refers to information that has been combined with experience, context, and judgment to create new insights and understanding. The two major types of knowledge are tacit and explicit knowledge. Tacit knowledge is knowledge that is difficult to express or codify. It is often based on personal experience and intuition. Explicit knowledge, on the other hand, is knowledge that can be expressed and codified in a formal language or other symbolic system. Comparison of Tacit and Explicit KnowledgeThe properties of tacit and explicit knowledge are different in several ways. Tacit knowledge is context-specific and highly personal. It is difficult to articulate or transfer to others. It is also difficult to formalize or codify. Explicit knowledge, on the other hand, is objective and universal. It can be expressed in a formal language or other symbolic system. It is also easier to formalize and codify. Knowledge Management Cycles and ModelsWiig's KM cycle is different from McElroy's KM cycle in several ways. Wiig's KM cycle is a four-stage cycle that consists of knowledge identification, knowledge acquisition, knowledge development, and knowledge deployment. McElroy's KM cycle, on the other hand, is a three-stage cycle that consists of knowledge creation, knowledge sharing, and knowledge utilization. One point of difference between the two models is that Wiig's model includes a stage for knowledge identification, while McElroy's model does not. Another point of difference is that Wiig's model includes a stage for knowledge deployment, while McElroy's model does not.Nonaka and Takeuchi's knowledge spiral model of KM describes how tacit and explicit knowledge are transformed into new knowledge. In this model, tacit knowledge is transformed into explicit knowledge through a process of externalization. Explicit knowledge is then transformed into tacit knowledge through a process of internalization. This cycle of transformation creates a spiral of knowledge creation that leads to the development of new knowledge and innovation. One transformation that would prove to be the most difficult is the transformation of tacit knowledge into explicit knowledge. This is because tacit knowledge is difficult to articulate or codify. Another transformation that would be fairly easy is the transformation of explicit knowledge into tacit knowledge. This is because explicit knowledge can be easily expressed and codified in a formal language or other symbolic system.References:In order to justify their assignment work, students must use proper references. At least five references should be used to support their work. These references should be properly cited and listed at the end of the report. Students should ensure that their references are from reliable and credible sources, such as academic journals, books, and research articles.
Learn more about identification here :-
https://brainly.com/question/28388067
#SPJ11
C++ question:
Code:(3 object constructor initialize)
Song::Song()
{
}
Song::Song(const char song_name[MAX_SONG_NAME_LENGTH], int length_in_seconds)
{
strcpy(name,song_name);
length_in_seconds = length_in_seconds;
}
Song::Song(const char song_name[MAX_SONG_NAME_LENGTH], int minutes, int seconds)
{
strcpy(name,song_name);
minutes = minutes;
seconds = seconds;
}
Question: how to implement operator << to have such out put
, length: 0m 0s
All Star, length: 3m 20s
Take On Me, length: 3m 45s
main function:
Song s00{};
Song s01{"All Star", 200};
Song s02{"Take On Me", 3, 45};
cout << s00 << endl;
cout << s01 << endl;
cout << s02 << endl;
The given C++ code consists of an object constructor. The constructor initializes objects of class `Song`.To implement the operator << for the desired output, the function must be overloaded to print the required information.
Given below is the overloaded operator << function:std::ostream& operator<< (std::ostream& out, const Song& song){out << song.name << ", length: " << song.minutes << "m " << song.seconds << "s";return out;}Below is the entire C++ code:Code:#include #include #define MAX_SONG_NAME_LENGTH 100class Song{private:char name[MAX_SONG_NAME_LENGTH]
nt minutes, seconds;public:Song();Song(const char song_name[MAX_SONG_NAME_LENGTH], int length_in_seconds);Song(const char song_name[MAX_SONG_NAME_LENGTH], int minutes, int seconds);friend std::ostream& operator<< (std::ostream& out, const Song& song);};Song::Song(){strcpy(name,"");minutes = 0;seconds = 0;}Song::Song(const char song_name[MAX_SONG_NAME_LENGTH], int length_in_seconds){strcpy(name,song_name);minutes = length_in_seconds / 60;seconds = length_in_seconds % 60;}Song::Song(const char song_name[MAX_SONG_NAME_LENGTH], int minutes, int seconds){strcpy(name,song_name);minutes = minutes;seconds = seconds;}std::ostream& operator<< (std::ostream& out, const Song& song){out << song.name << ", length: " << song.minutes << "m " << song.seconds << "s";return out;}int main(){Song s00{};Song s01{"All Star", 200};Song s02{"Take On Me", 3, 45};std::cout << s00 << std::endl;std::cout << s01 << std::endl;std::cout << s02 << std::endl;return 0;}The output of the above code will be:Output:, length: 0m 0sAll Star, length: 3m 20sTake On Me, length: 3m 45s.
To know more about C++ visit:
https://brainly.com/question/31062579
#SPJ11
the website dhmo.org is a classic example of an internet source that can mislead readers. which criterion below is violated by this website?
The website dhmo.org violates the criterion of credibility or reliability as an internet source.
Credibility refers to the trustworthiness and reliability of the information presented. It is crucial to evaluate the credibility of internet sources to ensure the accuracy and validity of the information being accessed. In the case of dhmo.org, the website intentionally presents misleading information about "dihydrogen monoxide" (DHMO), which is actually a scientific term for water. The website uses a satirical approach to create a false sense of danger around DHMO, leading readers to believe that it is a dangerous chemical that should be banned.
However, the intention behind the website is to highlight the importance of critical thinking and evaluating sources, rather than providing accurate scientific information. As a result, dhmo.org misleads readers by presenting false claims and distorting facts. This violation of credibility makes it an unreliable source for obtaining accurate and trustworthy information.
To ensure the reliability of internet sources, it is essential to critically evaluate the credibility, authority, accuracy, relevance, and currency of the information provided.
Learn more about website here
https://brainly.com/question/28431103
#SPJ11
Do you think many countries lack proper legislations to protect their user information on the Internet? Explain your answer with examples. (5 marks) Identify and explain the clauses you have learnt in this unit which relate to your answer. (5 marks)
Yes, many countries lack proper legislations to protect their user information on the Internet. There are several reasons why these countries fail to protect user information, including a lack of awareness of the need for such protections, inadequate funding for cybersecurity measures, and insufficient legal frameworks.
The GDPR, or General Data Protection Regulation, is one such clause. This clause applies to all organizations, both inside and outside the EU, that process the personal data of EU citizens and residents. Among other things, it requires companies to obtain explicit consent from users before collecting and processing their data, and to provide users with the right to access and delete their data.Another clause is the California Consumer Privacy Act (CCPA), which went into effect on January 1, 2020. The CCPA, among other things, gives California residents the right to know what personal information businesses collect about them, the right to request that this information be deleted, and the right to opt-out of the sale of their personal information.
The CCPA applies to all businesses that collect data on California residents, regardless of where those businesses are located.In conclusion, it is imperative that governments around the world enact and enforce strong data protection legislation to protect users' information on the Internet. The GDPR and CCPA are examples of such clauses that have been established to safeguard users' data.
To know more about frameworks visit:-
https://brainly.com/question/28266415
#SPJ11
Conceptualize information using the latest trend in IT such as
AI, Cloud Computing, Internet of things, and others. Explain your
system briefly and give at least 5 extraordinary features.
The latest trends in IT such as AI, cloud computing, the Internet of things and others are known for revolutionizing the digital world by creating more interactive, smarter, and efficient systems.
Here is how to conceptualize information using the latest trends in IT: Conceptualizing an AI-based system AI is revolutionizing the world by enabling machines to perform tasks that previously required human intervention. The AI system can analyze data, recognize speech, and understand natural language, and process and translate documents. The AI-based system can make predictions based on trends and patterns, and can identify potential problems before they occur.
The extraordinary features of an AI-based system include: The system can analyze data at a faster rate than humans. The system can identify potential problems before they occur. The system can make predictions based on trends and patterns. The system can recognize speech and understand natural language. The system can process and translate documents.Conceptualizing a cloud computing systemA cloud computing system enables users to store, manage, and access data and applications over the internet. The cloud computing system can be accessed from any location with an internet connection, and users can access data and applications on different devices.The extraordinary features of a cloud computing system include: The system can be accessed from any location with an internet connection. The system provides access to data and applications on different devices. The system allows users to store, manage, and access data and applications over the internet. The system provides a cost-effective solution for managing data and applications. The system allows users to scale up or down based on their needs. Conceptualizing an Internet of Things (IoT) systemAn IoT system is a network of physical objects, devices, vehicles, and buildings that are connected to the internet. The IoT system can collect, store, and analyze data in real-time, and can make decisions based on the data it collects. The system can reduce energy consumption and lower costs. The system can enhance safety and security.
To know more about computing visit :
https://brainly.com/question/17204194
#SPJ11
One running process is paused because time slice has expired, its state changes from execution to (5) __ state; One blocked process becomes(6)___ state after process waiting event has happened; A ready process changes its state from ready to (7) ___ state when its time slice has arrived.. A ) Ready B) Blocked C) Running D) Dead
The process goes from execution state to the ready state when a running process is paused because time slice has expired. The following answer options could be inferred from the statements provided in the question.
One running process is paused because time slice has expired, its state changes from execution to (5) Ready state;One blocked process becomes(6) Blocked state after process waiting event has happened;A ready process changes its state from ready to (7) Running state when its time slice has arrived.In conclusion, from the statement
It could be inferred that a running process is paused because time slice has expired, and it changes its state from execution to the Ready state; a blocked process becomes Blocked state after the process waiting event has happened, and a ready process changes its state from Ready to Running state when its time slice has arrived. Therefore, the answer options are:A) ReadyB) BlockedC) RunningD) Dead.
To know more about running visit :
https://brainly.com/question/30763349
#SPJ11
Fifi and her toy poodle join a friend, Fred, at a newly opened pet friendly café in Bruce, The Sparkling Poodle. Fred is taking Fifi to breakfast for her 18th birthday. Seated in the outdoor part of the café, Fifi decides to visit the washroom and tells Fred she would like the vegetarian omelette. Katrina, the waitress, arrives and hands Fred a written menu, but Fred refuses it, saying "I already know what we want, a vegetarian omelette for my friend, and I will have the almond croissant with a large coffee please". Fred tells Katrina that Fifi cannot tolerate mushrooms and asks whether there are mushrooms in the omelette. Katrina says, "we only serve mushrooms as an extra, but I will double check with the chef". Fred then says, "If the omelette can’t be made without mushrooms, my friend will also have the almond croissant instead". At that moment, Katrina is distracted by another customer, Viktor, who wants a table inside the café, out of the cold. Katrina forgets to check with the chef and puts Fifi’s order through. Katrina shows Viktor to a table near the main door. He notices that instead of chairs there are stools, which has him concerned since he is a large man. He asks whether the stools are safe to hold his weight. Katrina chuckles saying, "I assure you, that unlike cheaper plastic stools, our stools are made of metal designed to withstand all body weights". Viktor feels reassured and decides to stay. He proceeds to remove his woollen overcoat and scarf when Katrina points to hanging hooks on a wall, next to the door, with a sign that says, "Patrons, please consider others and hang your coats and belongings on these hooks before being seated". Viktor hesitates. He informs Katrina that his overcoat is cashmere and very expensive. Since his table is facing away from the door, he is unable to watch it, so he suggests that he will just keep it on. Katrina warns that the fireplace is about to be lit and he will likely be much too hot. She adds "don’t worry, your coat will be safe. We keep a close eye on our guests’ personal belongings, and we have never had any go amiss". Viktor is persuaded and hangs his coat and scarf on the hooks. Katrina then hands him the menu. He explains he forgot his glasses at home and asks Katrina to read out the house specials. He chooses the ‘big breakfast’ and Katrina takes the menu away. At the bottom of the Café’s menu it states, "for terms and conditions see back". Clause 3 of the Ts & Cs states, in small font, "Due to Covid-19, the staff, managers and owners of The Sparkling Poodle are not liable for any loss or damage to patrons, howsoever such loss or damage is incurred". Clause 3 also appears on a large sign on the counter next to the cash register where customers pay their bills. As it turns out, Fifi’s omelette did contain mushrooms, and after Viktor finished his breakfast, his stool collapsed, and he injured his back. To make matters worse, Jules, a new waitress slipped carrying a tray of food that collided with the wall and splashed onto Viktor’s cashmere coat, badly staining it. Explain the following: a) Are the statements made by Katrina about the mushrooms, stools, and safety of the hanging hooks contractual terms or mere representations? (10 marks) b) If the statements are terms, what type of terms are they and what remedy would be available to either or both Fifi and Viktor if the terms are breached? (10 marks) c) Can the Sparkling Poodle and its employees rely on Clause 3 to escape liability if Fifi or Viktor sue the café for breach of contract? (10 marks) In your answer apply relevant legislation and/or case law?
The statements made by Katrina about the mushrooms, stools, and safety of the hanging hooks can be considered contractual terms rather than mere representations.
A contractual term is a provision that forms part of a contract and is legally enforceable. In this case, when Fred asked Katrina about the mushrooms in the omelette, she checked with the chef and informed him that the omelette could be made without mushrooms. This statement created an expectation that the omelette would be mushroom-free, and it can be considered a contractual term.
b) If the terms regarding the omelette and the stools are breached, both Fifi and Viktor may be entitled to remedies for breach of contract. The terms regarding the omelette and the stools can be classified as conditions. A condition is an essential term that goes to the root of the contract. If a condition is breached, the innocent party may have the right to terminate the contract and seek damages.
c) The Sparkling Poodle and its employees cannot rely on Clause 3 to escape liability if Fifi or Viktor sue the café for breach of contract. Clause 3 attempts to exclude or limit the café's liability for any loss or damage incurred by patrons due to Covid-19. However, such exclusion or limitation of liability may not be enforceable if it is deemed to be unfair or unreasonable under relevant legislation or case law.
Overall, the statements made by Katrina about the mushrooms, stools, and safety of the hanging hooks can be considered contractual terms. If these terms are breached, Fifi and Viktor may be entitled to remedies such as refunds, replacements, or damages.
To know more about statements visit:
https://brainly.com/question/2285414
#SPJ11
Compare and contrast the procedural, object orientated and event driven paradigms used in the above source code (Report). 2.4 Critically evaluate the code samples that you have above in relation to their structure and the unique characteristics (Report).
Procedural, object-oriented, and event-driven programming paradigms are all used in the above source code. The procedural programming paradigm is used in the above source code to execute a set of statements in a particular order to achieve a specific objective. It is a basic programming paradigm that organizes a program as a series of steps (functions) that process data.
A single function is written to handle a particular task in procedural programming.The object-oriented programming paradigm is used in the above source code to create objects that have data and behavior. In the above source code, objects are created for the window and button. It includes the four fundamental concepts of OOP: inheritance, abstraction, encapsulation, and polymorphism. In OOP, objects have a state and behavior, and their behavior is determined by their class definition. Event-driven programming paradigm is used in the above source code to respond to user inputs and actions.
Events are generated by users, devices, or other sources and cause the program to react and execute a specific section of code.In relation to their structure and the unique characteristics, the code samples given above are well-structured. Each code block contains a specific set of instructions to execute a particular task. The unique characteristics of procedural programming paradigm include its simplicity, ease of maintenance, and debugging. On the other hand, the unique characteristics of object-oriented programming paradigm include data encapsulation, abstraction, and inheritance. Event-driven programming is efficient in handling user interactions and input events.
To know more about programming visit:-
https://brainly.com/question/14368396
#SPJ11
) In the selection sort (assume ascending order)
(a) A divide and conquer approach is used.
(b) A minimum/maximum key is repeatedly discovered.
(c) A number of items must be shifted to insert each item in its correctly sorted position.
(d) None of the above
In the selection sort, the following statement is accurate: A minimum/maximum key is repeatedly discovered.In a selection sort, the list of elements is divided into two parts: sorted and unsorted. Initially, the sorted portion is empty, and all of the data is in the unsorted section.
The correct answer is-B
The minimum or maximum element from the unsorted portion of the list is chosen and placed in the sorted portion. To put it another way, it selects the smallest element from the unsorted list and places it in the beginning of the sorted list. The search continues in the remaining list for the minimum element. The next smallest element is added to the sorted list after it has been located.
This method continues until the whole list is sorted.Answer: (b) A minimum/maximum key is repeatedly discovered. A minimum/maximum key is repeatedly discovered.In a selection sort, the list of elements is divided into two parts: sorted and unsorted. Initially, the sorted portion is empty, and all of the data is in the unsorted section.
To know more about data visit:
https://brainly.com/question/29117029
#SPJ11
A transaction is a sequence of database operations that access the database. 5.1 List and describe the properties that all database transactions should display. 5.2 Briefly discuss the techniques used in transaction recovery procedures.
Properties that all database transactions should display are as follows: Atomicity: If the transaction is broken down into smaller sub-tasks, the transaction's Atomicity property ensures that either all of them succeed or all of them fail.
If any part of a transaction fails, the database is returned to its previous state before the transaction was started. Consistency: A transaction should ensure that the database's integrity constraints are maintained, regardless of whether it is a successful or unsuccessful transaction.
Isolation: Simultaneously executing transactions should not interfere with each other. They should be treated as if they were running alone, in isolation. Durability: A transaction's effects should be permanent and persistent, even if the system crashes or fails.5.2 Techniques used in transaction recovery procedures are as follows: Backward recovery: In the event of a failure, the Backward recovery technique restores the database to a prior, saved state, ensuring that the transaction's Atomicity and Consistency properties are maintained. It rolls back the changes to the point before the failure occurred. Forward recovery: In the event of a failure, the Forward recovery technique restores the database to a state after the failure occurred, ensuring that the transaction's Durability property is preserved. The database is restored to its previous state, and all transactions that occurred after the point of failure are rolled forward.
To know more about database visit:
https://brainly.com/question/30163202
#SPJ11
what is open source? any proprietary software licensed under exclusive legal right of the copyright holder. any software whose source code is made available free for any third party to review and modify. contains instructions written by a programmer specifying the actions to be performed by computer software. nonproprietary hardware and software based on publicly known standards that allow third parties to create add-on products to plug into or interoperate.
Answer:
I have no idea where the answers break, but this one is the right answer:
any software whose source code is made available free for any third party to review and modify.
Explanation:
Open source means the application's code is available for the public to see and use. Anyone can take the code, modifying it accordingly, and distribute it without infringing on the rights of the original developer as the application is open to anyone.
What is the best use for a single accumulator on a 2d list? What
are some applications that would only need a single accumulator on
a 2d list?(python)
In Python programming, the single accumulator is used in a 2D list for different applications like summing up all values in a 2D list, counting the number of elements in a 2D list, or finding the maximum or minimum value in the list.
An accumulator is a variable that holds the result of an operation. It is used to store intermediate values in a calculation. In Python, an accumulator is a variable used to keep a running total. It is commonly used in for loops. An accumulator is a common programming pattern in Python that involves building up a result as you iterate over a sequence of values. You can use an accumulator to perform operations like summing the values in a list, counting the number of elements in a list, or finding the maximum or minimum value in the list.
What are some applications that would only need a single accumulator on a 2D list?The single accumulator can be used in a 2D list for a variety of applications. Some of these applications include:Summing up all values in a 2D list.Counting the number of elements in a 2D list.Finding the maximum or minimum value in the list.Average of values in the 2D listConcatenation of all elements in the 2D list.Filtering of all elements in the 2D list.
To know more about programming visit :
https://brainly.com/question/30391554
#SPJ11
Write a Python program that first creates empty list. You should then use some kind of loop that asks the user to enter 20 email addresses. Add each email address to the list.
Then, use a second loop to print each email address in the list together with its length.
Sample: Suppose there are 3 names, your program output (input in red) should look like this:
Enter email: stevewilliams2133
Enter email: steven21
Enter email: stevenwill21
Email: stevewilliams2133
Length: 17
Email: steven21
Length: 8
Email: stevenwill21
Length: 12
The code for a Python program that first creates an empty list, uses a loop that asks the user to enter 20 email addresses and then adds each email address to the list, and uses a second loop to print each email address in the list together with its length is as follows:```python
email_list = []
for i in range(20):
email = input("Enter email: ")
email_list.append(email)
for email in email_list:
print("Email:", email)
print("Length:", len(email))
```
In this program, the empty list is created using `email_list = []`. Then, the first loop runs for 20 iterations using the `range(20)` function, and in each iteration, the user is asked to enter an email address using the `input()` function. The entered email address is then appended to the email list using the `append()` method. After the first loop completes, the second loop runs over each email in the email list, and in each iteration, it prints the email using the `print()` function and calculates its length using the `len()` function.
To know more about Python visit :
https://brainly.com/question/17204194
#SPJ11
The following Python programs produces two lines of output. Write the exact formatted output of each line in the given spaces below: import math def main(): lines = for degree in range (10,90,5): sine = math.sin(math.radians (degree)) formatted_sin = format (sine, '8.5f) lines += str (degree)+formatted_sin+'\n' print (lines [:81) print (lines[-11:-31) main() Output linel is Output line2 is
Given the Python program:import math def main(): lines = for degree in range (10,90,5): sine = math.sin(math.radians (degree)) formatted_sin = format (sine, '8.5f) lines += str (degree)+formatted_sin+'\n' print (lines [:81) print (lines[-11:-31) main()Output line1 is '10 0.17365\n15 0.25882\n20 0.34202\n25 0.42262\n30 0.50000\n35 0.57358\n40 0.64279\n45 0.70711\n50 0.76604\n55 0.81915\n60 0.86603\n65 0.90631\n70 0.93969\n75 0.96593\n80 0.98481'Output line2 is ' 5. \n3'
As the lines variable holds the string representation of the degree and sine values, each line in the output shows the degree and the sine value, which is formatted in 8 spaces of 5 digits after the decimal point. As for the first line, the output shows the first 81 characters of the variable lines; it shows the degree and sine values from 10 to 80 and truncated sine value of 84. The second output line shows the last 11 to 31 characters of the lines variable, which shows the degree and the sine value for 85 and 90 degrees as well as the truncated sine value for 90 degrees.
So, the formatted output of the first line is:10 0.17365\n15 0.25882\n20 0.34202\n25 0.42262\n30 0.50000\n35 0.57358\n40 0.64279\n45 0.70711\n50 0.76604\n55 0.81915\n60 0.86603\n65 0.90631\n70 0.93969\n75 0.96593\n80 0.98481The formatted output of the second line is:5. \n3
To know more about output visit:-
https://brainly.com/question/14227929
#SPJ11
1-Make a report containing any simple binary search tree implementation project. 2- Make a report containing any simple combination of Queue and Stack implementation project. C++ data structure
Implementation of Simple Binary Search Tree in C++ Data Structure Binary Search Tree is a special type of binary tree which is designed to store elements in a specific order. In a binary search tree, the left sub-tree of a node contains only nodes with keys lesser than the node’s key.
The right sub-tree of a node contains only nodes with keys greater than the node’s key. Here's a simple implementation of Binary Search Tree in C++ language:#include using namespace std;struct Node{ int data; Node *left; Node *right;};// Creating a new node Node* new Node(int val){ Node* temp = new Node(); temp->data = val; temp->left = NULL; temp->right = NULL; return temp;}// Inserting a new node into the BSTNode* insert(Node* root, int val){ if(root == NULL) return newNode(val); if(val < root->data) root->left = insert(root->left, val); else if(val > root->data) root->right = insert(root->right, val); return root;}// In-order traversal of BSTvoid inorder(Node* root){ if(root == NULL) return; inorder(root->left); cout << root->data << " "; inorder(root->right);}//
Main functionint main(){ Node* root = NULL; root = insert(root, 5); insert(root, 3); insert(root, 2); insert(root, 4); insert(root, 7); insert(root, 6); insert(root, 8); inorder(root); return 0;} 2. Implementation of Simple Queue and Stack in C++ Data StructureA Stack is a LIFO (Last In First Out) data structure where the element that is inserted last will be the first one to come out. On the other hand, a Queue is a FIFO (First In First Out) data structure where the element that is inserted first will be the first one to come out. Here's a simple implementation of Stack and Queue in C++ language:#include using namespace std;#define MAX 100int top = -1; int stack[MAX];// Pushing an element into the stackvoid push(int val){ if(top >= MAX-1){ cout << "Stack Overflow" << endl; return; } stack[++top] = val;}// Removing an element from the stackint pop(){ if(top < 0){ cout << "Stack Underflow" << endl; return -1; } int val = stack[top--]; return val;}// Checking if the stack is empty or notbool isEmpty(){ return top < 0;}// Displaying all elements in the stackvoid displayStack(){ for(int i=top;i>=0;i--) cout << stack[i] << " "; cout << endl;}// Implementing a Queueint front = -1; int rear = -1; int queue[MAX];// Adding an element to the Queuevoid enqueue(int val){ if(rear == MAX-1){ cout << "Queue Overflow" << endl; return; } if(front == -1) front = 0; queue[++rear] = val;}// Removing an element from the Queueint dequeue(){ if(front == -1 || front > rear){ cout << "Queue Underflow" << endl; return -1; } int val = queue[front++]; return val;}// Checking if the Queue is empty or notbool isQueueEmpty(){ return front == -1 || front > rear;}// Displaying all elements in the Queuevoid displayQueue(){ for(int i=front;i<=rear;i++) cout << queue[i] << " "; cout << endl;}// Main functionint main(){ push(5); push(3); push(2); push(4); push(1); displayStack(); cout << pop() << endl; cout << pop() << endl; displayStack(); enqueue(5); enqueue(3); enqueue(2); enqueue(4); enqueue(1); displayQueue(); cout << dequeue() << endl; cout << dequeue() << endl; displayQueue(); return 0;}
To know more about Binary visit:
https://brainly.com/question/28222245
#SPJ11
what is an isp? instant service provider is a company that provides access to the internet for a monthly fee. internet service provider is a company that provides access to the internet for a monthly fee. internet sales provider is a company that provides access to the internet for a monthly fee. instant sales provider is a company that provides access to the internet for a monthly fee.
Answer:
internet service provider is a company that provides access to the internet for a monthly fee.
Explanation:
ISP stands for Internet Service Provider. They provide you internet access. Examples of ISPs would be Verizon, T-Mobile, AT&T, Rogers, Bell, and Spectrum.
public class TurtleTest {
public static void main(String[] args) {
int distance; // line 1
World window; // 2
Turtle turtle1; // 3
window = new World(); // 4
turtle1 = new Turtle(window); // 5
turtle1.forward(100); // 6
turtle1.turnLeft(); // line 7
}
}
ANSWER THESE QUESTIONS HERE:
Examine line 1’s variable declaration.
What is the name of the variable being declared in line 1?
What is the data type of the variable being declared?
Is it a primitive data type or a class data type?
Examine line 2’s variable declaration.
What is the name of the variable being declared in line 2?
What is the data type of the variable being declared?
Is it a primitive data type or a class data type?
There are three variable declarations in the above code segment. What is the data type of the third variable?
In lines 4 and 5, a new object was assigned to a reference variable.
What type of object was created by the fourth line of code?
What type of object was created by the fifth line of code?
What keyword was used in lines 4 and 5 to create the new objects?
What is the argument on line 5?
Consider lines 6 and 7.
Based on the context, what do you think lines 6 and 7 will cause to happen?
Which words caused these actions to happen?
How would you categorize these words in terms of Java / programming?
Line 1’s variable declaration The name of the variable being declared in line 1 is "distance".The data type of the variable being declared is "int".It is a primitive data type.
Line 2’s variable declaration The name of the variable being declared in line 2 is "window".The data type of the variable being declared is "World".It is a class data type.The data type of the third variable is "Turtle".Type of object createdThe fourth line of code creates a "World" object.
The fifth line of code creates a "Turtle" object. The "new" keyword was used in lines 4 and 5 to create the new objects. The argument on line 5 is "window". Based on the context, lines 6 and 7 will cause the turtle to move forward by 100 units and then turn left by 90 degrees. The words "forward" and "turnLeft" caused these actions to happen. These words can be categorized as Java method calls or function calls.
To know more about variable visit:
https://brainly.com/question/15078630
#SPJ11
The organization I picked is AdventHealth (a statewide healthcare organization). Develop a storyline or synopsis which outlines how your organization's information system was impacted by an event. Minimum of two pages.
Title: Resilience in Crisis: How AdventHealth's Information System Overcame a Devastating Cyberattack
Synopsis: AdventHealth, a leading statewide healthcare organization, faced a formidable challenge when it fell victim to a severe cyberattack that targeted its information system. This event disrupted critical operations, compromised patient data, and posed significant risks to the organization's reputation and patient care.
The storyline follows the organization's response to the cyberattack, highlighting the key moments, challenges faced, and the resilience displayed by AdventHealth's information system and dedicated team. It showcases the importance of cybersecurity measures and the critical role of information systems in safeguarding patient information and maintaining the continuity of care.
The narrative emphasizes the immediate actions taken by AdventHealth, such as isolating affected systems, engaging cybersecurity experts, and implementing enhanced security protocols. It highlights the collaboration between IT professionals, healthcare staff, and external partners to restore the system's functionality, recover compromised data, and reinforce cybersecurity defenses.
Ultimately, the storyline concludes with AdventHealth emerging stronger from the cyberattack, having learned valuable lessons about the significance of proactive cybersecurity measures and the need for continuous improvement in protecting sensitive healthcare information.
This storyline demonstrates AdventHealth's commitment to patient privacy, security, and resilience in the face of unprecedented cyber threats.
Learn more about Cyberattack here
https://brainly.com/question/29971706
#SPJ11
Which of the following is not the documents that would likely be reviewed in the planning and preparation phase of a formal external security audit?
A) Network diagrams
B) Data schemas
C) Policies and procedures
D) Various log files
The documents that would not likely to be reviewed in the planning and preparation phase of a formal external security audit are; D) Various log files.
Risk analysis involves identifying potential risks that could affect the accuracy and completeness of the financial statements which includes evaluating internal controls, identifying potential fraud or errors, and assessing external factors that could impact the organization's financial performance.
Then output of the risk analysis provides the auditor with insights into the areas of the organization that require additional security.
During the planning phase of the audit, the auditor reviews the risk analysis output to determine the areas of the organization that require additional attention that allows the auditor to design an audit plan that addresses the risks identified in the analysis.
Thus the documents that would not likely to be reviewed in the planning and preparation phase of a formal external security audit is D) Various log files.
Know more about the audit;
https://brainly.com/question/32352793
#SPJ4
Submission Task: Circle Class
2. What is printed by the following application?
// Circle.java: Contains both Circle class and its user class
1. public class Circle
2. 3. public double x, y; // center of the circle public double r; // radius of circle
//Methods to return circumference and area public int circumference () 4.
5. return 2*3.14*r;
6. public double area()
7.
return 3.14 * r * r;
// User class MyMain
8. class MyMain (
9. public static void main(String args[])
t
10. 11.
Circle aCircle; // creating reference aCircle = new Circle(); // creating object
12. 13.
aCircle.x = 10; // assigning value to
aCircle.y = 20;
14.
aCircle.r= 5;
15.
16.
double area = acircle.area();
double circumf aCircle.circumference ();
17. 18.
System.out.println("Radius="+aCircle.r+" Area="+area); System.out.println("Circumference ="+circumf);
3. What are the names of Class identifiers in two classes?
4. What are identifiers x and y called on line 2? 5. What is return type on line 4 in method header of circumference(), is it the correct type?
6. What is name of object for class Circle, give line number where it is initiated? 7. Add another identifier in the class to save the color for the circle and also add a method to
return the color of any object.
The following application prints "Radius=5.0 Area=78.5 Circumference =31.400000000000002" when executed: // Circle.java: Contains both Circle class and its user classpublic class Circle{ public double x, y; // center of the circle public double r;
// radius of circle//Methods to return circumference and area public int circumference () { return 2*3.14*r; } public double area() { return 3.14 * r * r; }}// User class MyMainclass MyMain { public static void main(String args[]) { Circle aCircle; // creating reference aCircle = new Circle(); // creating object aCircle.x = 10; // assigning value to x aCircle.y = 20; aCircle.r= 5; double area = acircle.area(); double circumf aCircle.circumference (); System.out.println("Radius="+aCircle.r+" Area="+area); System.out.println("Circumference ="+circumf); }}
The class identifiers in two classes are as follows: Circle and MyMain. The identifiers x and y are called fields or instance variables on line 2. The return type on line 4 in the method header of circumference() is an int, but it should be double to be the correct type. The name of the object for class Circle is acircle and it is initiated on line 11. Another identifier in the class to save the color for the circle can be named color and the method to return the color of any object can be named getColor. The following code shows how to add the color field and the getColor() method to the Circle class:// Circle.java: Contains both Circle class and its user classpublic class Circle{ public double x, y; // center of the circle public double r; // radius of circle public String color; // color of circle//Methods to return circumference, area, and color public int circumference () { return 2*3.14*r; } public double area() { return 3.14 * r * r; } public String getColor() { return color; }}
To know more about application visit:
https://brainly.com/question/31164894
#SPJ11
In a particular spreadsheet, the data in each cell is password protected. When cells are selected, the formula is visible in the formula bar. Which is true?
The true statement regarding the spreadsheet is - "When cells are selected, the formula is visible in the formula bar."
How is this so?In this particular spreadsheet, although the data in each cell is password protected, the formula bar displays the formula when the corresponding cells are selected.
This means that even with password protection on the cells, the formulas can still be viewed, potentially revealing sensitive information or calculations used in the spreadsheet.
Learn more about spreadsheet at:
https://brainly.com/question/4965119
#SPJ1
Question 7: How can you convert String ‘7E’ of any base to integer in JavaScript? Please name the function.
Question 8: What is the purpose of strict mode in JavaScript and how it can be enable? explain with code.
Question 9: What will be the output of the code below?
Let x = 1; If(function F(){}) {
X += typeof F;
} Console.log(x);
Question 10: Write a JS code to find the power of a number using for loop.
The function which is used in JavaScript to convert String ‘7E’ of any base to integer is `parse Int()`. It is used to convert a string with a given radix to an integer. The `parseIn t()` function parses a string and returns an integer, while `parse Float()` function parses a string and returns a floating-point number.
console.log(parseInt('7E', 16)); // expected output: 126
Strict mode in JavaScript is a way to write secure JavaScript code that contains fewer errors and is less prone to bugs. It helps in improving the efficiency of code and makes debugging easier. The following code shows how to enable strict mode:
'use strict';
var x = 3.14; // This will cause an error because x is not declared
It can be enabled globally or for individual functions. The global strict mode can be enabled by writing the code mentioned above in the beginning, while the function-specific strict mode can be enabled by writing `"use strict";` at the beginning of the function.
The output of the code will be `1undefined`.This is because the typeof operator returns `undefined` for functions that are defined, but not given a return value. The function F is not returning anything, so the `typeof` operator is returning `undefined`. Since `x` is `1` and the typeof `F` is `undefined`, when we add them together, we get `"1undefined"`.Example:
let x = 1;
if(function F(){}) {
x += typeof F;
}
console.log(x); // output: 1undefined
The following JS code can be used to find the power of a number using a for loop:
function findPower(base, exponent) {
let result = 1;
for (let i = 0; i < exponent; i++) {
result *= base;
}
return result;
}
console.log(findPower(2, 3)); // expected output: 8
To know more about JavaScript visit:
https://brainly.com/question/16698901
#SPJ11
Your aunt decided to open a day-care centre. The number of kids at her day-care centre is rapidly increasing and her methods of keeping data about the kids and their parents and guardians are becoming difficult to maintain. When a child is enrolled at her day-care centre, details about the child are recorded on a card and the card is indexed and stored in a filing cabinet. The details that are recorded about the child include the name(s), surname, date of birth, whether the child is a boy or a girl, date of enrolment and the category into which the child falls (new born, kindergarten or R-Grade). On the same enrolment card, details about the parents/guardians are also recorded. These details include name(s) and surname(s) of the parent/guardian, relationship with the child, residential address, contact details and emergency contact details. Your aunt has approached you and asked if you can develop a simple computerised form that would enable electronic capturing of these details. As an Information Technology student who is proficient in programming, you have decided to create this system using the Java programming language. 8 HPX100-1-Jan-Jun2022-SA1-CZ-V2-04012022
As an Information Technology student, you can develop a simple computerized form that will enable electronic capturing of these details. You have decided to create this system using the Java programming language.
Java is a high-level programming language and computing platform developed by Sun Microsystems (now Oracle). It was released in 1995 and is one of the world's most widely used programming languages.Java runs on a variety of platforms, such as Windows, Mac OS, and Linux, and is now widely used to create mobile applications, web applications, and games, as well as other forms of software development. Electronic capturing refers to the process of digitizing information from various sources, such as paper documents, audio, video, and images, and converting it into an electronic format that can be stored, retrieved, and processed more efficiently by computers.
What does the simple computerized form that you are developing involve The simple computerized form you are developing involves electronic capturing of details about the child and their parents/guardians. The details that are recorded about the child include the name(s), surname, date of birth, whether the child is a boy or a girl, date of enrollment and the category into which the child falls (newborn, kindergarten or R-Grade).On the same enrollment card, details about the parents/guardians are also recorded. These details include name(s) and surname(s) of the parent/guardian, relationship with the child, residential address, contact details and emergency contact details.
To know more about Technology visit
https://brainly.com/question/31591173
#SPJ11
The training set has 3 unique label values (A, B, C). Assume
that you have 3 trained binary classifiers (M1, M2, M3) using logistic
regression. M1 classifies an input to A or B; M2 classifies an input to B
or C and M3 classifies an input to A or C. How can you combine the 3
classifiers to one multinomial classifier to classify an input to A, B or
C?
To combine the three binary classifiers (M1, M2, M3) into a multinomial classifier that can classify the input into three labels (A, B, or C), you can use the One-Rest (OvR) approach. Here's how you can proceed:
1. Create three separate models:
Model M1: Trained to classify an input as A or not-A (B/C).
Model M2: Trained to classify an input as B or not-B (A/C).
Model M3: Trained to classify an input as C or not-C (A/B).
2. To classify a new input, use the following steps:
Apply all three models (M1, M2, M3) to the input independently.
Obtain the probability or confidence score of the input belonging to each label:
For M1, you get probabilities for A (P(A)) and not-A (P(not-A)).
For M2, you get probabilities for B (P(B)) and not-B (P(not-B)).
For M3, you get probabilities for C (P(C)) and not-C (P(not-C)).
3. Combine the probabilities from the three models to determine the final classification:
If the maximum probability is P(A), and P(A) is greater than both P(B) and P(C), classify the input as A.
If the maximum probability is P(B), and P(B) is greater than both P(A) and P(C), classify the input as B.
If the maximum probability is P(C), and P(C) is greater than both P(A) and P(B), classify the input as C.
In case there is a tie between the probabilities, you can decide on a tie-breaking rule, such as choosing the label alphabetically (e.g., A < B < C) or based on the order of precedence in your specific application.
By combining the three binary classifiers using the One-Rest approach and determining the maximum probability, you can create a multinomial classifier capable of classifying inputs into the labels A, B, or C.
Know more about probability:
https://brainly.com/question/32004014
#SPJ4
Write an assembly language program for the 8085 Microprocessor to calculate the sum of series of odd numbers. Input: 4250H = 04H 4251H = 6EH = 4252H = 32H = 4253H = 69H = 4254H = 3AH Store the result in memory location 4300H. Note: Starting Address of the Program (Mnemonic) Code: 4200H (2 marks)
Assembly language program for the 8085 Microprocessor to calculate the sum of the series of odd numbers is as follows:MOV H, M ;Load MSB of memory location 4250H into the H registerINX H ;Increment H to 4251HLXI D, 0000H
;Initialize the D register with 0000HMVI E, 00FFH ;Load E with 00FFH which is equivalent to 255LOOP:INX H ;Increment H to point to the next memory locationMOV A, M ;Load content of memory location into A registerANI 01H ;Mask the lower 7 bitsCMP E ;Compare with 255 (00FFH)JZ TERMINATE ;If A = 255, then terminateADI D ;Add the content of the D register to A register and store the result in the A registerMOV D, A ;Move the content of A register to the D registerJNC LOOP ;If there is no carry, repeat the process otherwise go to the label
TERMINATETERMINATE:MOV A, D ;Move the content of D register to A registerSTA 4300H ;Store the content of the A register to memory location 4300HHLTThe above program will calculate the sum of the series of odd numbers and stores the result in memory location 4300H.
To know more about Microprocessor visit:-
https://brainly.com/question/30514434
#SPJ11
In computer networking, please explain why the Data Link Layer
may need to add zeros (or ones) to a long string of ones (or zeros)
when framing a packet?
Short version, please.
In computer networking, Data Link Layer may need to add zeros (or ones) to a long string of ones (or zeros) when framing a packet because this enables the receiver to distinguish the packet from an idle line and synchronize correctly with the sender.
In computer networking, the data link layer is the second layer of the OSI (Open Systems Interconnection) reference model that provides the functional and procedural means for transferring data between network entities (usually nodes) that are operating on the same physical layer. The data link layer is the protocol layer that transfers data between adjacent network nodes in a wide area network (WAN) or between nodes on the same local area network (LAN) segment. In order to do this, the data link layer may need to add zeros (or ones) to a long string of ones (or zeros) when framing a packet.This enables the receiver to distinguish the packet from an idle line and synchronize correctly with the sender. Also, framing provides synchronization and data transparency. So, the framing allows the receiver to know the beginning and end of each packet, therefore it can avoid copying any unwanted data to the network layer.
A packet is framed before it is transmitted on the communication channel. This framing process involves inserting additional bits, referred to as framing bits, to define the start and end of the frame. Hence, in computer networking, Data Link Layer may need to add zeros (or ones) to a long string of ones (or zeros) when framing a packet because it provides synchronization and data transparency.
To know more about computer networking visit:
https://brainly.com/question/13992507
#SPJ11
How to build adjacency matrix for undirected/directed graph?
An adjacency matrix is a 2D array in which each row and column represent a vertex in the graph. The value stored in the matrix indicates whether the two vertices have an edge between them or not. The adjacency matrix for an undirected graph is symmetrical along the diagonal, whereas the adjacency matrix for a directed graph is not.
Both the rows and columns in an adjacency matrix for an undirected graph have the same number of entries. Additionally, when there is an edge from vertex i to vertex j in an undirected graph, the value at A[i,j] and A[j,i] is 1. It is symmetrical about the leading diagonal in this way. Furthermore .
An adjacency matrix for a directed graph, on the other hand, is not symmetrical around the main diagonal. The number of entries in the rows and columns may vary in an adjacency matrix for a directed graph, depending on the number of incoming and outgoing edges for each vertex. If there is an edge from vertex i to vertex j, the value in A[i,j] is 1, but the value in A[j,i] is 0 if there is no edge from j to i. An example of a directed graph's adjacency matrix is given below:
To know more about column visit
https://brainly.com/question/31591173
#SPJ11
This C++ code takes 4 points as teh rectagnle and then take a fifth point to check if it lies outside or inside the rectangle. Add the functionality of finding if the point lies on the rectangle (The lines of the rectangle).
#include
using namespace std;
float Ar(int x1, int y1, int x2, int y2,int x3, int y3)
{
int as;
as = ((x1 * (y2 - y3) + x2 * (y3 - y1) + x3 * (y1 - y2)) / 2.0);
return as;
}
double distance(int x1, int y1, int x2, int y2)
{
double tot = sqrt(pow(x2 - x1, 2) + pow(y2 - y1, 2));
return tot;
}
bool isRectangle(int x1, int y1, int x2, int y2, int x3, int y3, int x4, int y4)
{
int d1 = distance(x1, y1, x2, y2);
int d2 = distance(x2, y2, x3, y3);
int d3 = distance(x3, y3, x4, y4);
int d4 = distance(x1, y1, x4, y4);
float d5 = distance(x1, y1, x3, y3);
float d6 = distance(x2, y2, x4, y4);
if (d1 == d3 && d4 == d2)
{
if (d5 == d6)
{
return true;
}
}
else
{
return false;
}
}
bool find(int x1, int y1, int x2, int y2, int x3, int y3, int x4, int y4, int x, int y)
{
float d = Ar(x1, y1, x2, y2, x3, y3) + Ar(x1, y1, x4, y4, x3, y3);
float d1 = Ar(x, y, x1, y1, x2, y2);
float d2 = Ar(x, y, x2, y2, x3, y3);
float d3 = Ar(x, y, x3, y3, x4, y4);
float d4 = Ar(x, y, x1, y1, x4, y4);
if (d == d1 + d2 + d3 + d4)
{
return true;
}
else
return false;
}
int main()
{
int p1x, p1y, p2x, p2y, p3x, p3y, p4x, p4y,px,py;
cout << "\nP1: ";
cin >> p1x >> p1y;
cout << "\nP2: ";
cin >> p2x >> p2y;
cout << "\nP3: ";
cin >> p3x >> p3y;
cout << "\nP4: ";
cin >> p4x >> p4y;
cout << "\nPoint to find: ";
cin >> px >> py;
if (isRectangle(p1x, p1y, p2x, p2y, p3x, p3y, p4x, p4y) == true)
{
if (find(p1x, p1y, p2x, p2y, p3x, p3y, p4x, p4y, px, py))
{
cout << "(" << px << ", " << py << ") lies inside/on the Rectangle.";
}
else
{
cout << "(" << px << ", " << py << ") lies outside the Rectangle.";
}
}
else
{
cout << "\nThe given points doesn't make a rectangle.";
}
}
The additional functionality to find if the point lies on the rectangle (the lines of the rectangle) in the given C++ code that takes 4 points as the rectangle and then takes a fifth point to check if it lies outside or inside the rectangle can be added by using the following condition in the `find()` function:
```if ((((y2-y1)*(x-x1)+(x2-x1)*(y-y1))==0)||(((y3-y2)*(x-x2)+(x3-x2)*(y-y2))==0)||(((y4-y3)*(x-x3)+(x4-x3)*(y-y3))==0)||(((y1-y4)*(x-x4)+(x1-x4)*(y-y4))==0))```
The above condition checks whether the given point `(x,y)` lies on any of the four sides of the rectangle defined by the four points `p1(x1, y1)`, `p2(x2, y2)`, `p3(x3, y3)`, and `p4(x4, y4)` by comparing the areas formed by the point and the adjacent vertices of the sides with the total area of the rectangle represented by these four points. If the point lies on any of the sides, the area formed by the point and the adjacent vertices of that side will be zero.
Hence, this condition can be used to find if the point lies on the rectangle (the lines of the rectangle). The updated `find()` function with the above condition is as follows: ```bool find(int x1, int y1, int x2, int y2, int x3, int y3, int x4, int y4, int x, int y){float d = Ar(x1, y1, x2, y2, x3, y3) + Ar(x1, y1, x4, y4, x3, y3);float d1 = Ar(x, y, x1, y1, x2, y2);float d2 = Ar(x, y, x2, y2, x3, y3);float d3 = Ar(x, y, x3, y3, x4, y4);float d4 = Ar(x, y, x1, y1, x4, y4);if (d == d1 + d2 + d3 + d4){if ((((y2-y1)*(x-x1)+(x2-x1)*(y-y1))==0)||(((y3-y2)*(x-x2)+(x3-x2)*(y-y2))==0)||(((y4-y3)*(x-x3)+(x4-x3)*(y-y3))==0)||(((y1-y4)*(x-x4)+(x1-x4)*(y-y4))==0)){cout << "(" << x << ", " << y << ") lies on the Rectangle.";return true;}else{cout << "(" << x << ", " << y << ") lies inside the Rectangle.";return true;}}else{cout << "(" << x << ", " << y << ") lies outside the Rectangle.";return false;}}```Thus, the required additional functionality of finding if the point lies on the rectangle (the lines of the rectangle) can be added to the given C++ code by using the above condition.
To know more about functionality visit:
https://brainly.com/question/29847182
#SPJ11
Which statement about XLSTART is TRUE?
a. XLSTART stores the Personal Macro Workbook
b. Any file that is stored in XLSTART is opened automatically each time that you open Excel
c. Both A and B are true
d. Neither A nor B is true
The statement that is true about XLSTART is B. Any file that is stored in XLSTART is opened automatically each time that you open Excel. When you start Excel, Excel runs any Excel 4.0 macros (XLMs) or Excel version 4.0 international macros that are stored in the XLStart folder in your Microsoft Excel startup folder and in your Personal.xls workbook.
XLSTART folder stores files that are loaded in Excel every time Excel starts up. When you store files in the XLSTART folder, they are opened every time Excel starts up. It is important to note that if a workbook is stored in the XLSTART folder, Excel will open this workbook as an add-in, which is invisible by default. It does not show in the list of open workbooks.
Thus, any VBA code contained in the workbook can only be executed from within the Excel environment. There are two locations where you can store the XLSTART folder: the Excel default startup folder and the alternate startup folder. The Excel default startup folder is usually located in a path similar to: C:\Documents and Settings\user\Application Data\Microsoft\Excel\XLStart , On the other hand, Personal Macro Workbook is an Excel file that contains macros that you use often. It is stored in a default location on your computer and used as a repository for all macros that you record or create. When you record or create a macro, Excel automatically stores it in the Personal Macro Workbook so that you can use the macro across all of your workbooks.
To know more about file visit:
https://brainly.com/question/29055526
#SPJ11
