The properties of an ionic compound are as follows:
Conducts electricity and heat efficiently. Resists melting at high temperatures.Thus, the correct options for this question are C and D.
What do you mean by Ionic compound?An Ionic compound may be defined as a type of chemical compound that is significantly composed of ions that are held together by electrostatic forces referred to as ionic bonding.
The properties of ionic compounds are determined by the process through which they dissociate from one another when they dissolve in water. For example, NaCl. They are good conductors of heat and electricity.
Therefore, the correct options for this question are C and D.
To learn more about Ionic compounds, refer to the link:
https://brainly.com/question/21796142
#SPJ1
What is the ph of a solution prepared by diluting 25.0 ml of 0.10 m hcl with enough water to produce a total volume of 100.0 ml?
The pH of a solution is 1.60.
Chemical dissotiation of hydrochloric acid:
HCl(aq) → H⁺(aq) + Cl⁻(aq)
c₁(HCl) = 0.10 M; original concentration of the solution of hydrochloric acid (HCl) before it gets diluted
V₁(HCL) = 25.0 ml; the volume of HCl to be diluted
V₂(HCl) = 100.0 ml; final volume of HCl after dilution.
c₂(HCl) = ?; final concentration of the solution of HCl, after dilution
c₁ · V₁ = c₂ · V₂; formula to calculate concentration of a solution
c₂(HCl) = c₁ · V₁ ÷ V₂.
c₂(HCl) = 0.10 M · 25.0 ml ÷ 100 ml
c₂(HCl) = 0.025 M
From chemical reactio: c₂(HCl) = c(H⁺)
c(H⁺) = 0.025 M; concentration of hydrogen ions
pH = -logc(H⁺)
pH = 1.60
More about diluted solution: brainly.com/question/24881505
#SPJ4
please help me I need to know these answers rn A, B, OR C to each one
Answer:
First one
Explanation:
Because water molecules at the surface of the water puddle attract more to one other than they do to the air molecules above them
Answer:
Question 2:
Cohesion and adhesion
Water has forces of attraction between different molecules, so its molecules are locomotive.
Question 3:
Surface tension
It experiences a perpendicular force which keeps the area of the pepper on surface
[tex]{}[/tex]
Giving away 100 points Fast
What type of mixture is a solution?
Choose All the right answers
homogeneous mixture
all of the choices
none of the choices
heterogeneous mixture
Answer:
Homogeneous mixtures
Explanation:
This is because the substances are fully mixed together
When an ionic compound is added to water, the will be attracted to the partially positive h atom of water and the will be attracted to the partially negative o atom of water. As the compound dissolves the ions separate from each other, or.
Answer:
Ionic compounds dissolve in water because the water molecules hydrate the ions.
Explanation:
To dissolve an ionic compound, the water molecules must be able to stabilize the ions that result from breaking the ionic bond.
They do this by hydrating the ions.
Water is a polar molecule. It has a permanent dipole.
The
O
atom has a partial negative charge, and the
H
atoms have a partial positive charge.
When an ionic compound is added to water, the anion is attracted to partially positive hydrogen atom of water and cation is attracted to partially negative oxygen atom of water.
What is an ionic compound?Ionic compound or electrovalent compound is a type of compound which is formed between the two elements when there is an exchange of electrons which takes place between the atoms resulting in the formation of ions.
When the atom looses an electron it develops a positive charge and forms an ion called the cation while the other atom gains the electron and develops a negative charge and forms an ion called the anion.
As the two atoms are oppositely charged they attract each other which results in the formation of a bond called the ionic bond.
Learn more about ionic compounds,here:
https://brainly.com/question/9167977
#SPJ2
Help, please!! Been stuck on this question. Is it only neutral?
Answer:
neutral
Explanation:
.....................
What is the difference between a suspension and a solution?
a. A suspension is more concentrated than a solution.
b. A suspension is less concetrated than a solution
c. A suspension is heterogeneous while a solution is homogeneous
d. A suspension is homogeneous while a solution is heterogeneous.
plss answer correctly
Answer:
C
Explanation:
Solutions are mixtures that are homogeneous while suspensions are mixtures that are heterogeneous.
If 501 J of heat is available,
what is the mass in grams of
iron (specific heat = 0.450 J/g.
°C) that can be heated from
22.5°C to 120.0°C?
The mass of iron heated during temperature change is 11.42g
Given:
Temperature (denoted by ΔT) = Final temperature – Initial temperature = 120.0°C – 22.5°C = 97.5°C
Quantity of heat involved (denoted by q) = 501 Joules
Specific heat capacity of iron (denoted by C) = 0.45 J/g°C
To find:
Mass of iron (denoted by m) = ?
Formula:
C = q / (mΔT)
Calculation:
On substitution of the given values in the formula to find the mass of iron by first making mass of iron (m) as the subject of the formula
m = q / (CΔT)
m = 501 / (0.45 x 97.5)
m = 11.42g
Result:
The mass of iron heated during temperature change is found to be 11.42g
Learn more about mass of iron here:
https://brainly.com/question/17203919
#SPJ9
WILL GIVE BRAINLIEST
A student measures the mass of a bag of sand to be 9,321 g. What is the bag's mass
in kg?
Answer: 9.321 kg
Explanation:
1,000 g=1 kg
9,321 g * 1 kg/1,000 g=
9,321 * 1/1,000=
9,321/1,000=9.321 kg
I need help asap! It’s the scale model of the solar system project on science.
A scale model of the solar system can be defined as the small representation of the real solar system. A scale model mimics the real solar system with the sun at the center and nine planets revolving around the sun.
What benefits can scale models have for those studying the solar system?
Using this scale model, it is possible to comprehend space distances, the sizes of the planets and the sun in relation to one another, space travel periods, and the separation of the planets from one another as they orbit the sun.
What is Astronomical Unit(A.U.)?Approximately 93 million miles or 150 million kilometers between Earth and the Sun. The Astronomical Unit (A.U.) is the name given to this distance because it is so significant to humans living on Earth. One astronomical unit separates the Earth from the Sun.
To know more about the solar system visit:
https://brainly.com/question/12075871
#SPJ9
The phenomenon of waves changing direction as they approach the shoreline is known as ________.
The phenomenon of waves changing direction as they approach the shoreline is known as Wave refraction.
What is wave refraction?Refraction is the change in direction of waves as they move between materials with different properties. In Physics, when the speed changes the direction of wave passes from one medium to the another medium.Like wise, Water waves are refracted as they move from deep water to shallow water. Water waves travel faster in deep water than in shallow water.The wave refraction gets the changes in direction as it slows down because of reaching the shore line. In shallower water near the coast, waves slow down because of the force exerted on them by the seabed.
And the phenomenon of waves changing in the direction as they approach the shoreline is known as Wave refraction.
Learn more about wave refraction,
https://brainly.com/question/17227614
#SPJ4
Abnormal levels of _________ are linked to migraines, seizures, and schizophrenia. a. dopamine b. glutamate c. norepinephrine d. acetycholine please select the best answer from the choices provided a b c d
Answer:
b. glutamate
Explanation:
How many different signals would we expect in the 1h nmr spectrum of nicotinic acid? (give a number.)
four signals that expect in the 1H NMR spectrum.
What is the number of 1H NMR signals produced by each compound?There are four signals in the spectrum: triplet (0.7 ppm), multiplet (1.4 ppm), singlet (1.9 ppm), and triplet (2.2 ppm). Compounds, and should have four signals in the 1H NMR spectrum based on their structures. H NMR is the technique of choice for determining or confirming the structure of organic compounds or those containing protons. A solution-state proton spectrum is relatively fast to acquire when compared to other nuclei, and it can reveal a lot about the structure of a compound.Therefore, the four aromatic protons can be divided into three sets. The two methyl groups are equivalent. There are four signals in total in the 1H NMR spectrum.
To learn more about NMR spectrum refer to
https://brainly.com/question/24419453
#SPJ4
What is the force used with a centrifuge to rapidly separate the precipitate from the liquid?.
A centrifuge operates on the sedimentation principle, which states that substances divide according to density under the effect of gravitational force (g-force).
Separation methods include density gradient, phase separation, isopycnic, ultrafiltration, and pelleting.
Centrifugation is a process that uses centrifugal force to separate mixtures. A centrifuge is a gadget that, often powered by an electric engine, rotates an item around a given axis, such as a rotor.
Centrifugation protocols generally specify the relative centrifugal force (rcf) and the magnitude of acceleration in g multiples (g-force).
To learn more about a centrifuge: brainly.com/question/10472461
#SPJ4
What is the concentration of [h] in molars, millimolars, and micro-molars for a solution of ph 5?
The concentration of [H⁺] is 10⁻⁵ molar, 10⁻² millimolar and 10 micro-molar.
pH is a numeric scale used to specify the acidity or basicity of an aqueous solution.
pH = -log[H⁺], approximately the negative of the base 10 logarithm of the molar concentration of hydrogen ions.
When pH is less than seven (pH<7), solution is acidic (like this example).
pH = 5
[H⁺] = 10⁻⁵ M; concentration of hydrogen ions
Milli (symbol m) is a unit prefix in the metric system denoting a factor of one thousandth (10⁻³).
Micro (symbol µ) is a unit prefix in the metric system denoting a factor of one millionth (10⁻⁶).
[H⁺] = 10⁻⁵ × 10³ mM = 10⁻² mM
[H⁺] = 10⁻⁵ × 10⁶ µM = 10µM
More about pH: brainly.com/question/13557815
#SPJ4
What is (are) the product(s) in this reaction?
Answer: A
Explanation:
The arrow points towards what the finishing product is when you combine them, So H2CO3 would be the product.
I'm not amazing at this because I learned it 2 years ago lol, but that's my best educated guess. I hope it works!!
Curtis wanted to measure the volume of a rock using the method shown above. Which of the
following Sl units should he use?
A. grams
B. meters
C. milliliters
D. kilometers
Answer:
A. grams
Explanation:
Grams and milliliters are used to measure mass while meters and kilometers are used to measure distance. The mass of an object is the volume of it. Milliliters are used for liquids while grams are used for solids. Hence, grams is the answer.
One reason that explains the need for the isomerization step in the citric acid cycle is that _
One reason that explains the need for the isomerization step in the citric acid cycle is that citrate is a tertiary alcohol, which cannot be oxidized.
Citric acid cycle is the main source of energy for a living organism.
Citrate is isomerized to isocitrate by dehydration and rehydration. The enzyme aconitase catalyzes this step (see picture below).
Tertiary carbon (3°) withy hydroxyl group (-OH) is attached to three other carbons.
Tertiary carbon cannot be oxidized, while secondary carbon in isocitrate can. Isocitrate is secondary alcohol.
Secondary carbon (2°) is attached to two other carbons.
Primary carbon (1°) is attached to only one carbon.
More about oxidation: brainly.com/question/157342
#SPJ4
2. Question I don’t understand on this one buttt
Answer:
1st question is B
Explanation:
metal is a good conductor of heat and electricity
which of the following changes demonstrates a chemical properties?
1. substance breaks in half
2. substance combusts
3. Hammer bounces off substance
4. substance floats in water
Answer:
option 2( substance combusts)
Explanation:
mark me as brainliest
Another classmate argues that wind power merits more investment and development, and cites data in Figure 2 as evidence. Evaluate this argument. Do you agree with the classmate? What additional evidence would help strengthen your position?
I agree that wind power merits more investment and development.
Wind power is renewable resource of energy consumption but it has a few problems associated with it.
One of the issue is in the installation of the wind power plants because most of the wind power plants are located in the remote places which required extensive installation cost.
Wind power plants are also a potential threat to the wild life of the local area. Therefore, development is needed to sort this issue.
Also one of the major problems is the damage to the aesthetics and noise pollution due to which wind turbines.
You can learn more about wind power from
https://brainly.com/question/883099
#SPJ4
Please find the below attached image mentioned in the question
6. The function of the general adaptation syndrome (GAS) is to...
a) Return the body to a state of homeostasis.
b)
Enable the body to deal with increasing amounts of stress.
c) Increase the body's awareness of the stress response.
d) Change the body's response to stress.
Explanation:
C) increase body's awareness of the stress response
The function of the general adaptation syndrome (GAS) is to:
d) Change the body's response to stress.
The general adaptation syndrome (GAS) is a three-stage model that describes how the body responds to stress. The first stage is the alarm reaction, which is when the body releases hormones such as cortisol and adrenaline in response to a perceived threat. The second stage is the resistance stage, which is when the body tries to adapt to the stressor. The third stage is the exhaustion stage, which is when the body's resources are depleted and it can no longer cope with the stressor.
The function of GAS is to change the body's response to stress so that it can better cope with future stressors. This is done by increasing the production of stress hormones, such as cortisol, and by increasing the body's ability to use glucose for energy.
So the answer is (d) Change the body's response to stress.
To know more about general adaptation syndrome here
https://brainly.com/question/33560674
#SPJ2
CHz+ O2-> CO+H2O
Mrs. Jones asked her class to come up with 3 true statements about the chemical equation shown above.
Jenny said that the reactants in the equation were CH₂ and O2 and the products were CO + H₂O.
• Jeffery said that there were 2 atoms of oxygen (O) on the reactants side and 2 atoms of oxygen on the products
. Lisa said the chemical bonds of the reactants were broken to produce one molecule of water (H₂O) and one mo
Who was correct?
All three students were correct.
Jeffery is the only one who is correct since he counted the atoms.
None of the students are correct
Only Jenny and Jeffery are correct since chemical bonds were broken on the products side too. / HELP PLEASE
All three students are correct,
CH₂+ O₂-> CO+H₂O is combustion reaction
What is a chemical reaction?
A process in which one or more substances also called reactants, are converted to one or more different substances, known as products.yes, Jenny's statement is correct. Both CH₂ and O2 are reactants and CO + H₂O are products.⇒ Reactants - The substances that go into a chemical reaction
⇒ Products - The substances produced at the end of the reaction
Jeffery's statement is also correct. Reactant side has O₂ which has 2 a oxygen atoms while product side has H₂O and CO, both have 1 oxygen in each making a total of 2 oxygen atoms on product side.Lisa's statement is also correct. In a chemical reaction bonds are broken within reactant molecules and new bonds are formed within product molecules in order to form a new substance ( here H₂O and CO )Thus we can conclude that all three students were correct.
Learn more about chemical reaction at https://brainly.com/question/11231920
#SPJ1
For mercury, the enthalpy of vaporization is 58. 51 kj/mol and the entropy of vaporization is 92. 92 j/k·mol. What is the normal boiling point of mercury?.
The normal boiling point of mercury is 629.68 K.
ΔHvap(Hg) = 58. 51 kJ/mol
ΔHvap(Hg) = 58510 J/mol; the enthalpy of vaporization of mercury
ΔSvap(Hg) = 92. 92 J/K·mol; the entropy of vaporization of mercury
Tvap(Hg) = ΔHvap(Hg) ÷ ΔSvap(Hg)
Tvap(Hg) = 58510 J/mol ÷ 92. 92 J/K·mol
Tvap(Hg) = 629.68 K; the boiling point of mercury
The enthalpy of vaporization is the amount of energy that must be added to a substance in liquid state to transform that substance into a gas.
The entropy of vaporization is proportional to the ratio of the degree of randomness in the vapor and liquid phases.
More about entropy: brainly.com/question/4006598
#SPJ4
Cscl has a crystal stucture where each cl- ion is surrounded by 8 cs+ ions. derive the minimum r/r ration drequired for stability for the general case of cn=8
Cscl has a crystal stucture where each cl- ion is surrounded by 8 cs+ ions.
Caesium (Cs+) and chloride (Cl-) ions make up an equal amount of the crystals in caesium chloride. Two ions' radii—169 pm for Cs+ and 181 pm for Cl-—led to a radius ratio of 0.93, which suggests a body-centered cubic structure with a cubic hole.
The minimal ratio is 169/181 = 0.93 for rCs+/rCl-.
What is CsCl structure?
The physical makeup of calcium chloride, abbreviated CsCl. An unending chain of ions makes up the cubic structure of csCl. The cube's eight corners contain Cs (or Cl) ions, while the cube's centre contains Cl (or Cs) ions (thus it is NOT a body-centered lattice since that requires the SAME ion to occupy the edges and center).
Caesium (Cs+) and chloride (Cl-) ions make up an equal amount of the crystals in caesium chloride. Two ions' radii—169 pm for Cs+ and 181 pm for Cl-—led to a radius ratio of 0.93, which suggests a body-centered cubic structure with a cubic hole.
Thus the minimal ratio is 169/181 = 0.93 for rCs+/rCl-.
To learn more about CsCl structure from the given link below,
https://brainly.com/question/2999585
#SPJ4
A 15.33 gram sample of copper is heated in the presence of excess oxygen. a metal oxide is formed with a mass of 19.20 g. determine the empirical formula of the metal oxide.
The empirical formula will become CuO.
The formula of a specific chemical compound in its most basic form is known as an empirical formula. It's a condensed whole number ratio of the atoms in a formula.
Mass of copper = 15.33g
Mass of oxygen= 19.20g-15.33g = 3.87g
Calculations:
Moles of copper= 15.33 /63.54
Moles of copper =0.24
Moles of oxygen= 3.87 / 16
Moles of oxygen = 0.24
The number of moles of copper and oxygen are same. Hence, the empirical formula will become CuO.
Learn more empirical formula about here;
https://brainly.com/question/14044066
#SPJ4
What is the force used with a centrifuge to rapidly separate the precipitate from the liquid?.
Centrifugal force (centripetal acceleration) is used with a centrifuge to rapidly separate the precipitate from the liquid.
What is a centrifuge?
According to particle size and density, medium viscosity, and rotor speed, particles suspended in a liquid are separated using a centrifuge. Gravitational forces within a solution cause particles with densities greater than the solvent to sink and those with densities less than the solvent to float to the top.
Using the centrifugal force to separate particles found in a solution, centrifugation is a mechanical technique for separation. Depending on the size, shape, density, and rotor speed of the particles, different groups are created.
Thus, A centrifuge is used to quickly separate the precipitate from the liquid using centrifugal force (centripetal acceleration).
To learn more about centrifuge from the given link below,
https://brainly.com/question/12954017
#SPJ4
What is the charge of an atom with and equal number of protons and electrons
What is the density of an object that weighs 30.73 g that when added to a graduated cylinder filled with 50.0 ml of water, if the final volume is 60.7 ml?
The density of the object that weighs 30.73 g is: 2.87 g/ml
The density formula and the procedure we will use is:
d = m/v
Where:
v= volumed= densitym= massInformation about the problem:
m = 30.73 gv1 = 50.0 mlv2= 60.7 mlv(total)=?d=?Calculating the total volume we get:
v(total)= v2 - v1
v(total)= 60.7 ml - 50.0 ml
v(total)= 10.7 ml
Applying the density formula, we get:
d = m/v
d = 30.73 g/ 10.7 ml
d = 2.87 g/ml
What is density?It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.
Learn more about density in: brainly.com/question/1354972
#SPJ4
What quantity of moles of glucose (c6h12o6) in 0.500 l of a 0.400 m l of a 0.400 m?
Quantity of moles of glucose is 0.2 mol.
V (glucose) = 0.500 l; volume of glucose solution
c (glucose) = 0.400 M; concentration of glucose solution
n (glucose) = c (glucose) × V (glucose)
n (glucose) = 0.400 mol/l × 0.500 l
n (glucose) = 0.2 mol; amount of glucose in the solution
Glucose is chemical compound composed of carbon, hydrogen and oxygen atoms connected with covalent bonds.
Volume is the amount of space that a substance occupies.
The mole is the unit of measurement for amount of substance, the mole is an SI base unit, with the unit symbol mol.
The concentration is the amount of solute that has been dissolved in a given amount solution.
More about concentration: brainly.com/question/4789731
#SPJ4
Enter the masses of these particles in kilograms. Express the masses of proton and neutron to six significant figures. Express the mass of electron to two significant figures. Enter your answers in kilograms.
The masses of proton ( in kilogram) = 1.67262 × 10−27 kg ( six significant figure).
The masses of neutron ( in kilogram) = 1.67493 × 10−27 kg (six significant figure)The masses of electron ( in kilogram) = 9.1× 10−31 kg (two significant figure)Proton is a stable subatomic particle with symbols p, H+ or 1H+ and a positive charge of +1 e elementary charge. Its mass is slightly less than that of a neutron.
A neutron is a subatomic particle (symbol n or n⁰ ) with a neutral charge and a mass slightly greater than that of a proton. Protons and neutrons form the nucleus. Electrons, protons, and neutrons are the elementary particles that make up atoms. Atoms consist of a central nucleus containing neutrons and protons. Electrons revolve around the nucleus. Electrons are negatively charged, protons are positively charged, and neutrons are neutral. The electron mass is the mass of the rest electron, also known as the invariant mass of the electron.
Learn more about proton here:-https://brainly.com/question/1805828
#SPJ1
