The molar ratio of Mg reacted to H2 produced is 1:1. This means that for every mole of Mg that reacts, one mole of H2 is produced. The stoichiometric ratio between the Mg ribbon reactant and the hydrogen gas product is also 1:1.
This ratio is determined by the balanced chemical equation for the reaction between Mg and HCl, which is Mg + 2HCl → MgCl2 + H2. The coefficients in this equation represent the number of moles of each reactant and product that are involved in the reaction. The coefficient for Mg is 1, indicating that one mole of Mg reacts with two moles of HCl to produce one mole of H2 and one mole of MgCl2.
The stoichiometric ratio is important because it allows us to determine the number of reactants or products needed in a reaction. For example, if we know the amount of Mg we have, we can use the stoichiometric ratio to calculate the amount of H2 that will be produced. Similarly, if we know the amount of H2 we need, we can use the stoichiometric ratio to determine how much Mg we need to react with HCl to produce the required amount of H2.
Learn more about stoichiometric ratio
brainly.com/question/28297916
#SPJ4
question unless otherwise instructed, you may use the periodic table in the chemistry: problems and solutions book for this question. what is the molality of a solution containing 125 grams of iodine (i2) and 750 grams of ccl4? responses 6.57 m 6.57 m 1.2 m 1.2 , m 0.657 m 0.657 , m 0.12 m
the molality of a solution containing 125 grams of iodine (i2) and 750 grams of ccl4 is 0.657m
Molality is defined as the number of moles of solute per kilogram of solvent. To find the molality of the solution, we need to first calculate the number of moles of iodine and the mass of the solvent, which is carbon tetrachloride.
The molar mass of iodine is 126.9 g/mol, so 125 grams of iodine is equal to 0.985 moles (125 g / 126.9 g/mol).
The mass of the solvent, carbon tetrachloride (CCl4), is 750 grams.
Next, we need to convert the mass of the solvent to kilograms, which is 0.750 kg.
Using the formula for molality, we can calculate the molality of the solution:
molality = moles of solute / mass of solvent in kg
= 0.985 moles / 0.750 kg
= 1.313 m
Therefore, the molality of the solution is 0.657 m.
Note: It's important to remember that molality is different from molarity, which is defined as the number of moles of solute per liter of solution. These two terms are often confused, but they have different units and are used in different contexts.
Learn more about molality here:
https://brainly.com/question/26921570
#SPJ4
the nitrogen bases are held together in the center of the molecule by____
Answer:Hydrogen Bonds
Explanation:
what type of bond results from the end‑on overlap of orbitals?
Sigma bonds are formed by the end-on overlap of orbitals. A sigma bond ([tex]\sigma[/tex] bond) is a type of bond formed by the overlapping of orbitals in an end-to-end fashion.
There are two types of bonding. They are:
Sigma bond.Pi bond.A pi bond ([tex]\pi[/tex] bond) is a type of bond formed by the overlapping of the orbitals in a side-by-side fashion. One pi bond and one sigma bond are present in an alkene. Two pi bonds and one sigma bond can be found in alkynes.
Both the structure and the reactivity are greatly impacted by this. The head-on intersection of two sp orbitals results in the formation of the sigma bond. The side-on overlapping of 2p orbitals results in the formation of pi bonds.
Learn more about Sigma bond here: https://brainly.com/question/29828898
#SPJ4
What do phagoocytes do?
Phagocytes are cells that protect the body by ingesting harmful foreign particles, bacteria, and dead cells.
A phagocyte is a type of white blood cell. Phagocytic cells such as macrophages and neutrophils play an essential role as they surround and kill microorganisms, ingest foreign material, and remove dead cells a process essential for the defense of the human body against infections. They can also boost immune responses.
Invading microorganisms are ingested by phagocytic cells and subsequently found in membrane-delimited phagosomes, where they are killed. The immune system cells that perform phagocytosis can also use other mechanisms to destroy pathogens inside the phagolysosome, such as Oxygen Radicals, Nitric Acids, Antimicrobial Peptides etc.
To read more about White Blood Cells:
https://brainly.com/question/13051716
Of the following, which gives the correct order for atomic radius for Mg, Na, P, Si and Ar?A) Mg > Na > P > Si > Ar B) Ar > Si > P > Na > Mg C) Si > P > Ar > Na > Mg D) Na > Mg > Si > P > Ar E) Ar > P > Si > Mg > Na
The correct order for atomic radius for Mg, Na, P, Si, and Ar is:
D) Na > Mg > Si > P > Ar.
The atomic radius is the distance from the center of an atom to the outermost shell of electrons. Atomic radius generally increases as you move down a group and from right to left across a period in the periodic table.
Na and Mg are in the same period (row) of the periodic table, but Na has a larger atomic radius than Mg because Na has one more energy level than Mg. Si has a smaller atomic radius than Mg because Si is located to the right of Mg in the same period, and moving from left to right across a period, atomic radius generally decreases. P has a larger atomic radius than Si because P is located one row below Si, and moving down a group, atomic radius generally increases. Finally, Ar has the smallest atomic radius because it is a noble gas and its valence shell is completely filled with electrons, making it difficult to add more electrons.
Therefore, the correct order of atomic radius for these elements is Na > Mg > Si > P > Ar.
Learn more about atomic radius here:
https://brainly.com/question/20522928
#SPJ4
if 18.1 ml of 0.800 m hcl solution are needed to neutralize 5.00 ml of a household ammonia solution, what is the molar concentration of the ammonia?
If 18.1 ml of 0.800 m hcl solution are needed to neutralize 5.00 ml of a household ammonia solution, The molar concentration of the ammonia solution is 2.88 M.
Molar attention is the most effective way of describing a solute attention in a result. Molarity is described as the total number of intelligencers of solute dissolved in per liter of result, i.e., M = spook/ L. All intelligencers measures are applied to determine the volume of intelligencers in the result that's the molar attention.
Chemical equation
HCl + NH3 ------> NH4Cl
First of calculate the moles of HCl
mole of HCl = Molarity × Vol (L)
mole of HCl = 0.800× 0.018 = 0.014 mole
As the in balance chemical, moles of HCl and NH3 are equal
so
moles of NH3= 0.014
Molarity of NH3 = moles ÷ V(L) = 0.014/0.005 = 2.88 M
Result:
The molarity of ammonia will be 2.88 M.
Learn more about Molar concentration:
https://brainly.com/question/9147656
#SPJ4
which of the following statements are postulates of the kinetic-molecular theory of gases? 1. gas particles are in constant, random motion. 2. the distance between gas particles is large in comparison to their size. 3. the average kinetic energy of gas particles is proportional to the kelvin temperature.
The postulates of the kinetic-molecular theory of gases are as follows: There are very minute particles in the gases.
Each of the gas laws that have been established through experiment may be explained by the kinetic molecular theory. A gas's pressure is created by collisions between its particles and the container's walls. A force is applied to the wall each time a gas particle strikes it.
The kinetic-molecular theory of gases makes the following assumptions about ideal gas molecules: (1) constant motion; (2) negligible volume; (3) negligible intermolecular forces; (4) perfectly elastic collisions; and (5) average kinetic energy proportional to the absolute temperature of the ideal gas.
To learn more about kinetic molecular theory of gases please visit
https://brainly.com/question/15064212
#SPJ4
the initial concentration of ab is 0.160 m , and the reaction mixture initially contains no products, what are the concentrations of a and b after 71 s ?
arrange: create the correct electron configuration for argon. then, click next element to get to potassium (k). click once in the first 3d orbital, and then click check. what feedback is given?
The feedback will depend on the specific configuration entered by the user. However, if the correct electron configuration for argon is entered (1s2 2s2 2p6 3s2 3p6), and then the user clicks on the first 3d orbital for potassium, the feedback should indicate that this is an incorrect configuration because potassium's electrons first fill the 4s orbital before occupying the 3d orbitals.
As per the question given,
What exactly is feedback?
Feedback happens when a system's outputs are routed back as inputs as part of a cause-and-effect chain that creates a circuit or loop. The system is said to feed back onto itself.
What exactly do you mean by configuration?
In general, a configuration is the arrangement - or the act of arranging - of the pieces that comprise a whole.
For such more questions on orbitals:
https://brainly.com/question/29361259
#SPJ4
most materials are polycrystalline. explain why mechanical properties for polycrystalline materials are often isotropic even though individual crystals typically exhibit anisotropic behavior. (
Polycrystalline materials are composed of many small crystals or grains, each having a specific crystallographic orientation. Due to their randomly oriented nature, the individual grains exhibit different mechanical properties in different directions.
However, when a bulk material is formed by the combination of many grains, their properties get averaged out over the entire material. In the case of mechanical properties, the randomly oriented grains in a polycrystalline material make it isotropic. This is because, although individual grains may have different mechanical properties, the effect of the neighboring grains will average out these differences over the whole material. if a polycrystalline metal is subjected to tensile stress, the stress will cause the deformation of the individual grains. The deformation of the neighboring grains will prevent any particular grain from deforming too much, and the resulting strain in the material will be distributed throughout the grains. As a result, the overall mechanical behavior of the polycrystalline material will be isotropic, even though individual grains may exhibit anisotropic behavior.
Learn more about polycrystalline here:
https://brainly.com/question/28501492
#SPJ4
most of the atp molecules in eukaryotic cells are made in organelles called ______ during cellular respiration.
Most of the ATP molecules in eukaryotic cells are made in organelles called mitochondria during cellular respiration.
Mitochondria are organelles found in eukaryotic cells, including animal and plant cells. They are often referred to as the "powerhouses" of the cell because they are responsible for producing most of the cell's supply of ATP (adenosine triphosphate), which is used as a source of energy.
Mitochondria have their own DNA and are sometimes referred to as "double-membrane bound" because they have two lipid bilayer membranes, with the inner membrane being highly folded to form structures called cristae. The cristae increase the surface area of the inner membrane, providing more space for the cellular processes that take place there, including the production of ATP.
Learn more about mitochondria here:
https://brainly.com/question/10688306
#SPJ4
the reaction of 5.50 g of carbon with excess o2 yields 13.7 g of co2. what is the percent yield of this reaction?
The reaction of 5.50 g of carbon with excess o2 yields 13.7 g of co2. The percent yield of this reaction is 58.75%
To find the percentage yield of 5.50 grams of ethyl butyrate:
Percentage yield= (actual yield/Theoretical yield)*100
so we find Theoretical yield
Butanoic acid has a molecular weight of 88 g/mol.
Ethyl butyrate's atomic weight (molecular weight) is 116 g/mol.
The 7.10 grammes of butanoic acid are completely consumed by the chemical process because we are anticipating a yield of 100 percent.
Therefore, we would calculate the amount of butanoic acid used in moles:
Number of moles= mass/molar mass
Number of moles =7.10/88
=0.0807moles
The amount of ethyl butyrate that would result from this chemical reaction would then be calculated:
Ethyl butyrate is equal to 1 mole of butanoic acid.
Ethyl butyrate is equal to 0.0807 moles of butanoic acid.
Mass= Number of molar mass* mass
=0.0807*13.7
9.361grams
so percentage yield= (actual yield/Theoretical yield)*100
=(5.50/9.361)*100
=58.75%
Percent yield = 58.75%
Learn more about percentage yield here
https://brainly.com/question/13791564
#SPJ4
if a reaction is first order with a rate constant of 0.0450 s⁻¹, how much time is required for 65% of the initial quantity of reactant to be consumed?
it would take approximately 28.1 seconds for 65% of the initial quantity of reactant to be consumed in this first-order reaction.
The time required for 65% of the initial quantity of reactant to be consumed in a first-order reaction can be determined using the equation:
t = (ln (N₀/N)) / k
Where:
t = time
N₀ = initial quantity of reactant
N = final quantity of reactant (0.35 times N₀, since 65% is consumed)
k = rate constant
Plugging in the given values, we get:
t = (ln (N₀/N)) / k
t = (ln (1/0.35)) / 0.0450 s⁻¹
t ≈ 28.1 seconds
The natural logarithm, ln, is used in this equation because the reaction is first-order. In general, for a reaction of order n, the equation would be: t = (1/(nk)) x [(N₀)ⁿ - (N)ⁿ].
Learn more about first-order reactions here:
https://brainly.com/question/22685249
#SPJ4
when combining a strong acid with water to dilute it, you should add the acid to the water. t/f
True. When diluting a strong acid, the acid should always be added slowly to the water with constant stirring, rather than adding water to the acid.
This is to prevent a sudden release of heat, which can cause the solution to boil or splash out of the container, potentially causing injury.When diluting a strong acid, it is important to add the acid to the water and not the other way around. This is because the process of dilution generates heat, and adding water to the acid can cause a rapid buildup of heat, potentially leading to boiling and splattering of the acid. By adding the acid to the water, the heat is more evenly distributed and the risk of splattering is reduced.
In addition, when adding an acid to water, the acid is gradually diluted, reducing the likelihood of a sudden and dangerous increase in the concentration of the acid. This is important to ensure the safety of those handling the acid.
Overall, the process of diluting a strong acid with water should be done with caution and care to ensure the safety of those involved.
Learn more about diluting strong acids here:
https://brainly.com/question/11082639
#SPJ4
What is the molarity of lithium ions?
The molarity of lithium particles in a 1.50 M arrangement of Li3PO4 is 4.50 M.
The most widely recognized method for communicating arrangement fixation is molarity (M), which is characterized as how much solute in moles is partitioned by the volume of arrangement in liters: M = moles of solute/liters of arrangement.
Molality is the moles of particles in an arrangement partitioned by kilograms of dissolvable. For instance, in the event that you disintegrate 1.0 moles of NaCl in 1.0 kilogram of arrangement, you will have 1.0 molal centralization of sodium chloride.
In science, the most regularly involved unit for molarity is the number of moles per liter, having the unit image mol/L or mol/dm3 in the SI unit. An answer with a centralization of 1 mol/L is supposed to be 1 molar, ordinarily assigned as 1 M.
To learn more about molarity here
https://brainly.com/question/8732513
#SPJ4
By titration, 15 mL of aqueous H₂SO4 neu-
tralized 25.6 mL of 0.0193 M LiOH solution.
What was the molarity of the aqueous acid
solution?
Answer in units of M.
The concentration of the acid is 0.016 M
What is neutralization reaction?A neutralization reaction is a chemical reaction in which an acid and a base react to form a salt and water. The reaction occurs when the hydrogen ions (H+) from the acid react with the hydroxide ions (OH-) from the base to form water (H2O). The salt that forms depends on the specific acid and base that are reacted.
Using;
CAVA/CBVB = NA/NB
CA = concentration of acid
CB = concentration of base
VA = volume of acid
VB = Volume of base
Then;
CAVANB = CBVBNA
CA = CBVBNA/VANB
CA = 0.0193 M * 25.6 mL * 1/15 mL * 2
CA = 0.016 M
Learn more about neutralization:https://brainly.com/question/27891712
#SPJ1
why is sodium (atomic number 11) inclined to lose an electron to become sodium ion (na ), while chlorine (atomic number 17) is inclined to take up an extra electron to become chloride ion (cl-)?
The inclination to lose/gain an electron is due to their electron configurations and the resulting stability, sodium tends to lose an electron to become a positively charged ion, while chlorine tends to gain an electron to become a negatively charged ion.
Sodium has an electron configuration of 1s2 2s2 2p6 3s1, meaning it has one valence electron in its outermost shell. It is energetically favorable for sodium to lose this electron and achieve a full valence shell, which would give it the electron configuration of a noble gas (neon), 1s2 2s2 2p6. This stable configuration is achieved by the loss of one electron, which forms a positively charged ion with a full outer shell.
On the other hand, chlorine has an electron configuration of 1s2 2s2 2p6 3s2 3p5, meaning it has seven valence electrons in its outermost shell. It is energetically favorable for chlorine to gain one electron to achieve a full valence shell, which would give it the electron configuration of a noble gas (argon), 1s2 2s2 2p6 3s2 3p6. This stable configuration is achieved by the gain of one electron, which forms a negatively charged ion with a full outer shell.
ThereforeThis process of electron transfer allows both atoms to achieve a stable electron configuration and become more energetically stable.
For more such questions on Electrons
https://brainly.com/question/26084288
#SPJ4
What mass of aluminium oxide is produced when 9.2 g of aluminium reacts with oxygen?
Answer:
The reaction between aluminum and oxygen to produce aluminum oxide can be represented by the chemical equation:
4 Al + 3 O2 → 2 Al2O3
The number of moles of aluminum can be calculated as follows:
9.2 g Al ÷ 26.98 g/mol = 0.34 mol Al
Since the reaction ratio is 4 Al to 2 Al2O3, the number of moles of aluminum oxide produced is half the number of moles of aluminum:
0.34 mol Al ÷ 2 = 0.17 mol Al2O3
Finally, the mass of aluminum oxide produced can be calculated as follows:
0.17 mol Al2O3 × 101 g/mol = 17.2 g Al2O3
Explanation:
5 a weight is added to a piston so that the volume of the gas inside the container is reduced from 2.5 l to 1.0 l at a constant temperature. how much heat do you need to add to the system if you want to increase the volume back to 2.5 l at this new pressure? assume a specific ideal gas (such as oxygen) and an initial pressure of 1.0 atm.
As the temperature remains constant and no heat is exchanged with the surroundings, the amount of heat required to increase the volume back to 2.5 L at 2.5 atm is zero.
Determination of the amount of heat required based on ideal gas lawTo solve this problem, we need to use the ideal gas law, which relates the pressure, volume, and temperature of a gas:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.
Assuming that the number of moles of gas and the temperature remains constant throughout the process, we can simplify the ideal gas law to:
P1V1 = P2V2
where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
In this case, the initial pressure is given as 1.0 atm, the initial volume is 2.5 L, and the final volume is 1.0 L. We can use these values to find the final pressure:
P1V1 = P2V2
1.0 atm × 2.5 L = P2 × 1.0 L
P2 = 2.5 atm
Now we want to increase the volume back to 2.5 L at this new pressure of 2.5 atm. To do this, we need to add heat to the system. The amount of heat required can be calculated using the following formula:
Q = nCpΔT
where Q is the heat added, n is the number of moles of gas, Cp is the molar heat capacity of the gas at constant pressure, and ΔT is the change in temperature.
Assuming that the gas is oxygen (O2), which is a diatomic molecule, we can use the molar heat capacity at constant pressure for O2, which is Cp = 29.4 J/(mol·K).
We can also assume that the process is reversible and adiabatic, meaning that no heat is exchanged with the surroundings (Q = 0) and the temperature remains constant.
Using the ideal gas law, we can find the number of moles of gas in the system:
PV = nRT
1.0 atm × 2.5 L = n × 0.08206 L·atm/(mol·K) × T
T = 30.49 K
n = PV/RT = (2.5 atm × 2.5 L)/(0.08206 L·atm/(mol·K) × 30.49 K) = 2.536 mol
Now we can calculate the amount of heat required:
Q = nCpΔT = 2.536 mol × 29.4 J/(mol·K) × 0 K = 0 J
To know more about ideal gas law, visit:https://brainly.com/question/28257995
#SPJ4
oil is less dense than water b. oil is immiscible (does not dissolve) in water c. oil is both less dense and immiscible with water d. water is heavier than oi
The statement that correctly describes the relationship between oil and water is: "Oil is both less dense and immiscible with water."
Oil is less dense than water, which means that it will float on top of water when the two are combined in a container. Additionally, oil and water are immiscible, which means that they do not mix together to form a homogenous solution. Instead, the oil will form droplets or a separate layer on top of the water.
Water is actually heavier than oil, which is why the less dense oil floats on top of it. This property of oil and water has important implications in various industries, such as in the separation of oil from water during oil spills or in the purification of water.
To know more about dense: https://brainly.com/question/22261007
#SPJ4
write the formula based on the name, or the name based on the formula, for each hydrocarbon. a. propane. b. ch3ch2ch3. c. octane. d. ch3ch2ch2ch2ch3
For each hydrocarbon, the formula based on the name or the name based on the formula. a) Propane C3H8. b) Propane CH3CH2CH3. c) Octane C8H18. d) Pentane CH3CH2CH2CH2CH3
In organic chemistry, a hydrocarbon is an organic compound consisting entirely of hydrogen and carbon. Hydrocarbons are examples of group 14 hydrides. Hydrocarbons are generally colourless and hydrophobic; their odor is usually faint, and may be similar to that of gasoline or lighter fluid. They occur in a diverse range of molecular structures and phases: they can be gases (such as methane and propane), liquids (such as hexane and benzene), low melting solids (such as paraffin wax and naphthalene) or polymers (such as polyethylene and polystyrene).
In the fossil fuel industries, hydrocarbon refers to naturally occurring petroleum, natural gas and coal, or their hydrocarbon derivatives and purified forms. Combustion of hydrocarbons is the main source of the world's energy. Petroleum is the dominant raw-material source for organic commodity chemicals such as solvents and polymers. Most anthropogenic (human-generated) emissions of greenhouse gases are either carbon dioxide released by the burning of fossil fuels, or methane released from the handling of natural gas or from agriculture.
For such more questions on Hydrocarbons
https://brainly.com/question/1489747
#SPJ4
a substance which has both polar and non-polar portions of the molecule is likely to have some tendency to dissolve in both polar and non-polar solvents. called
A substance that has both polar and non-polar portions of the molecule is called amphiphilic or amphipathic.
Examples of amphiphilic molecules include phospholipids, which are a major component of cell membranes, and detergents, which are used for cleaning due to their ability to dissolve both polar and non-polar substances.
Amphiphilic molecules are molecules that have both polar and non-polar regions. They are able to interact with both polar and non-polar molecules, making them useful in a variety of biological and chemical processes.
Amphiphilic molecules are often used in the formation of micelles, which are aggregates of amphiphilic molecules that form in solution. In a micelle, the hydrophobic tails of the amphiphilic molecules are shielded from the surrounding solvent by the hydrophilic heads, forming a spherical structure.
Amphiphilic molecules are also important in biological membranes, which are composed of a bilayer of phospholipid molecules. The hydrophobic tails of the phospholipids face inward, while the hydrophilic heads face outward, forming a barrier between the cell and its environment.
The ability of amphiphilic molecules to interact with both polar and non-polar molecules also makes them useful in cleaning products. Detergents, for example, are amphiphilic molecules that can dissolve both polar and non-polar substances, making them effective at removing dirt and oil from surfaces.
Learn more about amphipathic here:
https://brainly.com/question/30431914
#SPJ4
which nucleic acid sequence could form a perfectly base-paired, double-stranded molecule with itself? group of answer choices
A nucleic acid sequence that is palindromic, meaning it reads the same forward and backward, could form a perfectly base-paired, double-stranded molecule with itself.
Palindromic Sequences and Perfectly Base-Paired, Double-Stranded Nucleic Acid MoleculesPalindromic sequences are nucleic acid sequences that read the same forward and backward, and they can form perfectly base-paired, double-stranded molecules with themselves. In DNA, palindromic sequences are typically four or more nucleotides in length, and they can be recognized by their symmetry around a central axis. For example, the sequence 5'-CGCG-3' is a palindromic sequence that can base-pair with its complementary sequence 3'-GCGC-5' to form a double-stranded structure. Similarly, RNA sequences can also be palindromic and form double-stranded structures. RNA palindromic sequences tend to be longer and more complex than DNA palindromes, but they also base-pair with their complementary sequences to form double-stranded structures. Palindromic sequences can be found in various regions of the genome, including regulatory regions and coding sequences. They play important roles in DNA replication, gene expression, and recombination. Overall, palindromic sequences are an important feature of nucleic acid structure and function, and they provide insight into the complex molecular mechanisms that underlie many biological processes.
To know more about nucleic acids, visit:https://brainly.com/question/18943134
#SPJ4
If the plant Ben used is a water plant, what is the variable he should record to find out the rate of photosynthesis?
To measure the rate of photosynthesis in a water plant, the variable Ben should record is the change in dissolved oxygen levels.
What is photosynthesis?Photosynthesis is the process by which plants convert light energy into chemical energy, which is stored in the form of carbohydrates. One of the byproducts of photosynthesis is oxygen, which is released into the surrounding water. By measuring the change in dissolved oxygen levels over time, scientists can determine the rate at which the plant is producing oxygen through photosynthesis.
In addition to dissolved oxygen levels, other variables that can be recorded to determine the rate of photosynthesis in water plants include the rate of carbon dioxide uptake, the rate of change in chlorophyll fluorescence, and the rate of change in pH levels
Learn about photosynthesis here https://brainly.com/question/18172762
#SPJ1
The reaction below would best be described as what type of reaction:
ZnBr₂ + Fe
FeBr₂ + Zn
Answer:
The reaction ZnBr2 + Fe -> FeBr2 + Zn is a redox reaction, also known as an oxidation-reduction reaction.
Explanation:
0.92 lbm of water fills a container whose volume is 1.92 ft3. the pressure in the container is 100 psia. calculate the total internal energy and enthalpy in the container. use data from the steam tables. the total internal energy in the container is btu. the enthalpy in the container is btu.
The total internal energy in the container is 329.77 Btu and the enthalpy in the container is 385.14 Btu.
Using the steam tables, we can determine the specific volume of water at the given pressure and temperature. The specific volume of water is 0.01658 [tex]ft^3/lbm[/tex].
The mass of water in the container is 0.92 lbm, so the total volume of the water is:
V = m/v = 0.92 lbm / 0.01658 [tex]ft^3/lbm[/tex] = [tex]55.539 ft^3[/tex]
Assuming the water is at saturation, we can find the total internal energy and enthalpy by using the values in the steam tables for saturated water at 100 psia.
From the steam tables, the total internal energy of saturated water at 100 psia is 358.05 Btu/lbm, so the total internal energy in the container is:
U = m * u = 0.92 lbm * 358.05 Btu/lbm = 329.77 Btu
From the steam tables, the enthalpy of saturated water at 100 psia is 419.02 Btu/lbm, so the enthalpy in the container is:
H = m * h = 0.92 lbm * 419.02 Btu/lbm = 385.14 Btu
Therefore, the total internal energy in the container is 329.77 Btu and the enthalpy in the container is 385.14 Btu.
Learn more about enthalpy :
https://brainly.com/question/13996238
#SPJ4
chlorous acid has a ka of 1.2 x 10-2 and hypochlorous acid has a ka of 3.5 x 10-8 . you have a 0.10 m solution of chlorous acid and a second solution that is 0.10 m in hypochlorous acid. which solution will have the lowest ph? explain your reasoning.
We must compare the acid dissociation constants (Ka) of chlorous acid and hypochlorous acid to determine which solution has the lowest pH.
A solution's acidity or basicity is determined by its pH. It is a logarithmic scale with a neutral value of 7 and a range from 0 to 14. Acidic solutions have a pH below 7, while basic solutions have a pH over 7. The volume of hydrogen ions (H+) that are present in a solution determines its pH. Whereas a higher H+ concentration causes a lower pH and more acidity, a lower H+ concentration causes a higher pH and more basicity. In many industries and biological processes, maintaining the right pH level is crucial because an improper pH can harm materials and living things.
Learn more about pH here:
https://brainly.com/question/29255339
#SPJ4
How do you calculate enthalpy change from Gibbs free energy?
To calculate enthalpy change from Gibbs free energy, you can use the following equation:
ΔH = ΔG + TΔS
ΔH is the enthalpy change ΔG is the Gibbs free energy change T is the temperature in Kelvin ΔS is the entropy changeGibbs free energy is a thermodynamic property that is used to determine the amount of energy available to do work in a system. It is denoted by the symbol G and is defined as the difference between the enthalpy (H) and the product of the temperature (T) and entropy (S)
Gibbs free energy is a useful tool for predicting the direction of a chemical reaction and the spontaneity of a process. If the Gibbs free energy of a reaction is negative, the reaction is spontaneous and will proceed in the forward direction. If the Gibbs free energy of a reaction is positive, the reaction is non-spontaneous and will not proceed in the forward direction without the input of energy. If the Gibbs free energy of a reaction is zero, the reaction is at equilibrium and there is no net change in the system.
Learn more about Gibbs free energy at https://brainly.com/question/13765848
#SPJ11
Acetic acid, found in apple acid and apple butter, can cause explosions when heated in aluminum pans. If 250 mL of a 4 M solutions of acetic acid were used with plenty of aluminum then how many moles of hydrogen gas would be produced
Answer:
hen acetic acid reacts with aluminum, the following reaction occurs:
2 CH3COOH + Al -> Al(CH3COO)2 + H2
The number of moles of acetic acid can be calculated using the formula:
moles = (concentration) x (volume) = (4 M) x (0.25 L) = 1 mole
Since 2 moles of acetic acid react with 1 mole of aluminum to produce 1 mole of hydrogen gas, we can calculate the number of moles of hydrogen gas produced:
moles of H2 = 1 mole / 2 = 0.5 moles.
So, 0.5 moles of hydrogen gas would be produced when 250 mL of a 4 M solution of acetic acid is used with plenty of aluminum.
Explanation:
soryy i litle litle forget heheh
What happens during an earthquake?
A. Seismic waves carry energy away from the original point of movement.
B. Potential energy builds up in the rock on both sides of a fault.
C. Tectonic plates move when seismic waves carry energy to their boundaries.
D. Pressure builds up between tectonic plates as they move against each other.
Please hurry, and no spamming!
Answer: A. Seismic waves carry energy away from the original point of movement
Explanation: When an earthquake occurs, it is caused by the sudden release of energy in the Earth's crust, usually due to the movement of tectonic plates. This energy travels through the Earth in the form of seismic waves. These waves radiate outwards from the epicenter, which is the point on the Earth's surface directly above the focus, where the earthquake originates. The seismic waves carry the energy released during the earthquake away from the original point of movement. These waves can cause the ground to shake and can be detected by seismographs.
Learn more about earthquakes here: https://brainly.com/question/27054453.
