what is spaced practice what is spaced practice​

Since what we have is an alpha decay, the missing component is 234/90 Th

Alpha decay is a type of radioactive decay in which an atomic nucleus emits an alpha particle, which is a helium nucleus consisting of two protons and two neutrons. During alpha decay, the atomic number of the parent nucleus decreases by two, and the mass number decreases by four.

Apha particles can be stopped by a thin layer of material such as paper or skin, and they do not penetrate very far into matter.

Learn more about  Alpha decay:https://brainly.com/question/27870937

#SPJ1

Molecular formula S₂F₁₀ for the compound with the empirical formula SF₅ and formula weight 254.1 a.m.u.

Molecular formula for a compound with the empirical formula CH₂O and formula weight 180.156 a.m.u: C₆H₁₂O₆.

Molecular Formula:

Molecular formulas use subscripts that give the actual number of atoms of each type in the molecule of a compound. The molecular formula is related to the molecular weight in grams, which is a simple integer multiple of the mass of the corresponding empirical formula.

Empirical Formula:

The empirical formula of a compound is the formula for a substance written in terms of the smallest integer exponent. The empirical formula provides information about the atomic number ratio of a compound. The percent composition of a compound leads directly to the empirical formula.

Now,

The molecular formula of a compound with a given empirical formula can be calculated as:

molecular formula = (empirical formula)n

The molecular formula for this compound is: n = 254.1

⇒ 127n = 254.1

⇒ n = 2

Formula = (SF5)₂ = S2F10

⇒ (CH2O)n = 180.156amu 44 {41 24424} = 180. 156

⇒ (30)n = 180.156

⇒ n = 6

Molecular formula = (CH2O)₆ = C6H12O₆

Molecular formula of a compound with empirical formula CH2O and formula weight 180.156 amu: C₆H₁₂O₆.

Learn more about Molecular Formula:

https://brainly.com/question/28647690

#SPJ4

Answer:

The molecular formula of the compound with the empirical formula SF5 and a formula mass of 254.1 amu is S2F10. This can be determined by dividing the formula mass by the empirical formula mass (254.1/48.3 = 5.26) and then multiplying the elements of the empirical formula by this value (S x 5.26 = S2, F x 5.26 = F10).

The fact that sulphuric acid is extremely corrosive to skin is a part of physical chemistry (option B).

Physical chemistry is the science that uses theories and techniques from physics to study chemical systems.

Physical chemistry blends the principles of physics and chemistry to study the physical characteristics, or properties, of molecules.

According to this question, the corrosive feature of sulphuric acid is a physical attribute of the substance, hence, it is studied under physical chemistry.

Learn more about physical chemistry: https://brainly.com/question/27958732

#SPJ1

The molar mass of (NH4)2HPO4 ( N H 4 ) 2 H P O 4 is 132.06 grams per mole.

The millimole is 1/1000 of a mole. The mass in grams of a millimole is the millimolar mass (mM)= 1/1000 of the molar mass. The canine mass M of a substance is the mass in grams NH4 2HPO4 of 1 mole of that material. (M: 106.1 g/mol) that are carried in 2.00 g of pure sodium carbonate.

The formula weight of the amalgam, Al2(SO4)3 . ... The weight of a millimole of (NH4)2HPO4 is: (a) 132 g: (b) 114 g: (c) 1.14 x 10-3 g: (d) 0.132 g .(NH4)2HPO4 subatomic weight. The molar mass of (NH4)2HPO4 = 132.056221 g/mol. Convert grams (NH4)2HPO4 to moles or moles (NH4)2HPO4 to grams.

So we can conclude that A fusion of NH4NO3 and (NH4)2HPO4 contains 30.40 % mass percent of nitrogen.

Learn more about NH4 2HPO4 here: https://brainly.com/question/10252040

#SPJ1

There are two ways to measure pH: calorimetrically with indicator fluids or sheets and electrochemically with electrodes and a millivoltmeter for greater accuracy (pH meter).

The pH scale is used to indicate how basic or acidic a solution is (pH stands for potential of hydrogen). The pH scale gauges a substance's acidity or basicity. It falls between 0 and 14. Seven is the neutral pH.

The pH scale is a useful tool for illustrating how basic or acidic a solution is. By using the negative logarithm of the hydronium ion concentration, or pH = -log[H3O+], we may determine the pH of a solution.

To know more about pH visit:-

https://brainly.com/question/2288405

#SPJ1

Answer: here’s mine :)

Answer: Single Replacement

Explanation:

This is single replacement because the Fluorine replaces Bromine in the Sodium Bromide solution. This happens because Fluorine is higher on the halogens activity series.

The concentration at t = 300 s is  1.1 * 10^-30 M

The rate constant, also known as the reaction rate constant, is a constant of proportionality that relates the rate of a chemical reaction to the concentration of reactants. It is a measure of the speed at which a chemical reaction occurs and is dependent on temperature, pressure, and other physical and chemical factors.

The rate constant is represented by the symbol "k" and is usually expressed in units of reciprocal time, such as per second (s^-1).

We know that for the first order reaction;

ln[A] =ln [A]o - kt

[A] = final concentration at time t

[A]o = Initial concentration

k = rate constant

t = time taken

ln[A] = ln1 - 0.23 * 300

ln[A] = -ln69

[A] = e^-69

= 1.1 * 10^-30 M

Learn more about concentration:https://brainly.com/question/10725862

#SPJ1

The molar mass is 370 g/mol.

The freezing point is the temperature at which a substance changes from a liquid to a solid state. This change of state occurs when the thermal energy of the substance decreases to the point where the molecules can no longer move freely and instead become organized in a fixed, solid structure.

We know that;

ΔT = K m i

ΔT = Freezing point depression

K = freezing constant

m = molality

i  = Van't Hoff factor

Thus;

Molality = 35.3/M/148.5 * 10^-3

Where M is the molar mass

Then;

ΔT = Freezing point of pure solvent - Solution

= 0 - (-1.2°C) = 1.2°C

Thus;

1.2 = 1.86 * 35.3/0.148 M * 1

1.2 * 0.148 M = 1.86 * 35.3

M = 1.86 * 35.3/1.2 * 0.148

M = 65.658/0.1776

M = 370 g/mol

Learn more about freezing point:https://brainly.com/question/3121416

#SPJ1

The quantity of electrical energy released is a function of the quantity of energy coming from the energy source (low vs. high). The system will release (A) more (B) less energy depending on how much energy is introduced into it.

The rotor shaft of a generator is spun or rotated by the fluid's force on the blades. The generator then transforms the kinetic (mechanical) energy of the rotor into electrical energy.

Turbines come in a variety of forms, including steam, combustion (gas), hydroelectric, and wind turbines.

At the scale that a large utility would use them, solar and wind power are currently the least expensive sources of energy. They are much less expensive than coal and nuclear power plants and slightly less expensive than natural gas-fired power plants.

Therefore, Depending on how much energy is supplied into the system, it will either (A) release more (B) or less (C).

Learn more about electrical energy here:

https://brainly.com/question/16182853

#SPJ1

Answer:

Some are Oxidation, Reduction, Combustion and electronegativity

Explanation:

[tex]0.225 moles[/tex] of nitrogen gas are produced when[tex]36.0 g[/tex] of NH4NO3 reacts.

The reaction for the decomposition of ammonia nitrate (NH4NO3) is given by:

NH4NO3 → N2 + 2H2O

The number of moles of nitrogen gas (N2) produced when 36.0 g of NH4NO3 reacts can be determined using the following steps:

1. Calculate the molar mass of NH4NO3.

[tex]Molar mass of NH4NO3 = (1 *14.007 g/mol) + (4 *1.008 g/mol) + (3 * 14.007 g/mol) \\ = 80.042 g/mol[/tex]

2. Calculate the number of moles of NH4NO3 present in the given mass.

Number of moles =[tex]\farc{Mass}{Molar mass}\\ = \frac{36.0 g}{80.042 g/mol}\\ = 0.45 moles[/tex]

3. Calculate the number of moles of nitrogen gas produced.

Number of moles of N2 produced = [tex]\frac{0.45 moles}{2 }= 0.225 moles[/tex]

Therefore,36.0 g of NH4NO3 react with oxygen to generate g of nitrogen gas  [tex]0.225 moles[/tex].

learn more about nitrogen gas Refer:brainly.com/question/10069872

#SPJ4

Answer: 1 L

Explanation: M1V1 = M2V2

Given :

M1 =15  M

V1=0.2 L

M2=3  M

V 2= ?

15 × 0.2 = 3V2

​Thus, V 2=1  L

The equation for the formation of each compounds are given below:

N₂ (g) + 3 H₂ (g) --> 2 NH₃ (g)

C (s) + O₂ (g) --> CO₂ (g)

4 Fe (s) + 3 O₂ (g) --> 2 Fe₂O₃ (s)

C (s) + 2 H₂ (g) --> CH₄ (g)

The standard enthalpy of formation of a substance is defined as the enthalpy change that occurs when 1 mole of the substance is formed from its constituent elements in their standard states.

Hf for NH₃ is -46.0 kJ/mol.

Hf for CO₂ is -393.5 kJ/mol

Hf for solid Fe₂O₃ is -826.0 kJ/mol.

Hf for methane gas is -74.9 kJ/mol.

Learn more about standard enthalpy from the link given below.

https://brainly.com/question/30262557

#SPJ4

The percent fat, carbohydrates and protein for this sandwich are   18%, 56.4% and 24.71% respectively.

The mass percent might be used to denote a degree. Furthermore, it defines the component during a certain mixing. The solution composition usually frequently defined in terms of mass percentage.

It represents the amount of solute contained in a constant amount of solution. The quantity of solutes can be stated in terms of mass or moles.

Mass percent of fat= (10.1/ 53.7)×100=18%

Mass percent of carbohydrate = (30.3/ 53.7)×100=56.4%

Mass percent of protein= (13.3 / 53.7)×100=24.71%

Therefore,  the percent fat, carbohydrates and protein for this sandwich are   18%, 56.4% and 24.71% respectively.

To learn more about mass percentage, here:

https://brainly.com/question/28998211

#SPJ1

Answer:

In order to calculate the theoretical yield of Aluminum Sulfate in this reaction, you would need to know the balanced chemical equation for the reaction between Copper (II) Sulfate and Aluminum.

Without that information, it is not possible to determine the amount of Aluminum Sulfate that would be produced from 2.50 grams of Copper (II) Sulfate.

Explanation:

For a given mass of gas at a constant temperature, when volume decreases pressure increases.

For at a constant temperature, when mass decreases pressure increases.

According to Boyle's Law, at a constant temperature, the pressure of a gas is inversely proportional to its volume.

Thus, a decrease in the volume of a gas will result in an increase in pressure, assuming that the temperature and amount of gas remain constant.

Assuming that the temperature and volume remain constant, an increase in the mass of a gas will result in an increase in its pressure. This is because as the mass of the gas increases, the number of gas particles also increases, which leads to an increase in the frequency and force of their collisions with the container walls. These increased collisions result in an increase in the pressure of the gas.

Learn more about pressure and volume gases at: https://brainly.com/question/24719118

#SPJ1

Answer:  Kc = 0.5625

Explanation: The equilibrium constant, Kc, can be calculated using the equilibrium concentrations of the reactants and products: Kc = ([SO₂] * [NO]) / ([SO] * [NO₂]) Plugging in the given concentrations: Kc = (0.350 * 0.650) / (0.650 * 0.350) Kc = 0.5625

It shows that the number of individuals in the population will decrease until the carrying capacity of the environment is reached.

What is the environment?

To know more about environment, click the link given below:

https://brainly.com/question/13107711

#SPJ1

When a pot of water is put on a stove, the water at the surface gets hot primarily by conduction.

When a pot of water is put on a stove, the water at the surface gets hot primarily by conduction.

Conduction is the transfer of heat through a material by direct contact. When the pot is heated on the stove, the metal of the pot gets hot, and this heat is conducted to the water molecules in contact with the pot. These water molecules then transfer the heat to neighboring water molecules through conduction, and so on. As a result, the heat gradually spreads throughout the pot and heats up the water.

It's important to note that convection also plays a role in heating the water in a pot. As the water near the bottom of the pot gets heated, it becomes less dense and rises to the top, while cooler water near the top sinks to the bottom to replace it. This movement of water, called convection, helps to distribute the heat more evenly throughout the pot. However, in the initial stages of heating, when the water is still and has not yet started to convect, conduction is the primary mechanism by which the surface water gets heated.

To learn more about Conduction:

https://brainly.com/question/18568158

#SPJ4

Answer:

12.0 grams of hydrogen would produce 12.0 grams of water.

Explanation:

The reaction between hydrogen and oxygen to form water can be represented as follows:

2H2(g) + O2(g) -> 2H2O(l)

From the equation, it can be seen that for every 2 grams of hydrogen, 1 gram of oxygen is required to produce 2 grams of water. Therefore, if 12.0 grams of hydrogen reacts with oxygen, 12.0/2 = 6.0 grams of oxygen would be required. This amount of oxygen would produce 2 * 6.0 = 12.0 grams of water.

Answer:

Explanation:

the grams of water produced= 44 grames  

If a 5.68-g sample of ZnS contains 3.80 g of Zn then the mass of Zn that can be obtained from 7.53 kg of Zns. is 5.04kg so correct option is

(b) 5.04kg.

With the provided data, we can first determine the mass percent content of zinc in ZnS:

(Mass of Zn / Mass of ZnS) times 100% Equals mass percent of Zn

3.80 g / 5.68 g x 100%, where mass percent of Zn

Zn mass percentage is 66.9%.

This indicates that zinc accounts for 66.9% of the mass of ZnS. This number can be used to determine how much Zn can be extracted from 7.53 kg of ZnS:

mass of Zn from 7.53 kg of ZnS is equal to (66.9 / 100) × 7.53 kg, or 5.04 kg.

As a result, 5.04 kg of Zn can be extracted from 7.53 kg of ZnS. 5.04 kg is the correct answer (b).

Learn more about Zns here:

https://brainly.com/question/28157336

#SPJ4

On changing dielectric, charge changes directly. It is directly proportional to dielectric permittivity of free space.

In electromagnetism, a dielectric (or dielectric medium) is an electrical insulator that can be captivated by an applied electric field. At the point when a dielectric material is put in an electric field, electric charges don't course through the material as they do in an electrical conduit, since they have no inexactly bound, or free, electrons that might float through the material, however rather they shift, just somewhat, from their typical balance positions, causing dielectric polarization.

Due to dielectric polarization, positive charges are dislodged toward the field and negative charges change in the course inverse to the field (for instance, assuming that the field is moving lined up with the positive x hub, the negative charges will change in the negative x course). This makes an inside electric field that decreases the general field inside the actual dielectric. Assuming a dielectric is made out of pitifully reinforced particles, those atoms become energized.

We know that Q=CV where Q is charge, C is capacitance and V is the voltage of capacitor.

Since, capacitance is equal to= (∈A₀) /d  where ∈ is permittivity of free space or dielectric value.

If we increase dielectric value, capacitance will increase. When capacitance increase ,charge will also increase.

To know more about dielectric,visit here:

https://brainly.com/question/13265076

#SPJ4

As per the temperature, the molecules of a substance act differently. The melting point is -114.2 °C and The boiling point of hydrogen chloride (HCl) is -85.05 °C. The correct sketch in each set is as follows:

Thus, if the temperature is kept above  -85.05 °C, the molecules will be placed widely apart and will be in the gaseous state, revealing their properties.

If the temperature is between -114.2 °C and -85.05 °C, the molecules will be organized in layers capable of slipping over one another since they will be in a liquid state.

At last, the molecules will be arranged in an orderly manner because they will be in a solid state if the temperature is below -114.2 °C.

To learn more about hydrogen chloride,

brainly.com/question/17429912

#SPJ4

Answer:

The molar mass of Mg2SiO4 can be calculated by adding the atomic masses of each element:

Mg: 2 x 24.31 g/mol = 48.62 g/mol

Si: 1 x 28.09 g/mol = 28.09 g/mol

O: 4 x 16.00 g/mol = 64.00 g/mol

Molar mass of Mg2SiO4 = 48.62 + 28.09 + 64.00 = 140.71 g/mol

To calculate the number of oxygen atoms in a 120.0 g sample of forsterite, we first need to calculate the number of moles of Mg2SiO4 in the sample:

n = mass / molar mass = 120.0 g / 140.71 g/mol = 0.853 mol

Next, we can use the molecular formula to determine the number of oxygen atoms in one mole of Mg2SiO4:

Mg2SiO4 has 4 oxygen atoms per molecule, so one mole of Mg2SiO4 has 4 moles of oxygen atoms.

Therefore, the number of oxygen atoms in 0.853 mol of Mg2SiO4 is:

0.853 mol Mg2SiO4 x 4 mol O / 1 mol Mg2SiO4 = 3.412 mol O

Finally, we can convert the number of oxygen atoms to a more convenient unit, such as atoms. One mole of oxygen atoms contains 6.022 x 10^23 atoms, so the total number of oxygen atoms in 0.853 mol of Mg2SiO4 is:

3.412 mol O x 6.022 x 10^23 atoms/mol = 2.055 x 10^24 atoms of oxygen

Rounding this result to 4 significant digits, we get:

2.055 x 10^24 atoms of oxygen (to 4 significant digits)

Explanation:

Answer:

Organic solidarity

Explanation:

its right

Taking into account the definition of density, the volume of a rock that weighs 52.0 g and has a density of 19.4 g/mL is 2.68 mL.

Density is defined as the property of matter, whether solid, liquid or gas, that allows to measure the amount of mass in a certain volume of a substance.

The expression for its calculation is the quotient between the mass of a body and the volume it occupies:

denstiy= mass÷ volume

In this case, you know that:

Replacing in the definition of density:

19.4 g/mL= 52 g÷ volume

Solving:

19.4 g/mL× volume= 52 g

volume= 52 g÷ 19.4 g/mL

volume= 2.68 mL

In summary, the volume is 2.68 mL.

Learn more about density:

brainly.com/question/952755

#SPJ1

Yes, all of these energy sources can cause a turbine to generate electrical energy.

Energy source is an entity or substance that provides energy, typically in the form of electricity, heat, or fuel. This energy can be used to provide light, motion, heat, and to power machinery, among other things. Examples of energy sources include fossil fuels such as coal and natural gas, renewable sources such as solar, hydro, and wind power, and nuclear sources such as uranium and thorium. Energy sources can be used for many different applications, from powering vehicles to providing heat and light for homes and businesses.

A tea kettle or faucet can generate steam to power a turbine, a bicycle can provide mechanical energy to spin the turbine, and solar energy can be converted into electricity by a solar panel and used to power a turbine.

To learn more about energy source
https://brainly.com/question/28447755
#SPJ1

Answer:

the final temperature of the aluminum after losing 2.87 x 10^3 J of heat is approximately 91.3 °C.

Explanation:

The relationship between heat, mass, and temperature change can be described by the formula:

Q = mcΔT

where Q is the heat transferred (in joules), m is the mass of the sample (in kilograms), c is the specific heat capacity of aluminum (about 0.9 J/g°C), and ΔT is the change in temperature (in degrees Celsius).

Rearranging the equation to solve for ΔT, we get:

ΔT = Q / (mc)

First, we need to convert the mass from grams to kilograms:

m = 53.2 g / 1000 g/kg = 0.0532 kg

Next, we can plug in the values for Q, m, and c and solve for ΔT:

ΔT = (2.87 x 10^3 J) / (0.0532 kg * 0.9 J/g°C) = approximately 63.7 °C

Finally, we can subtract the ΔT from the initial temperature to find the final temperature:

T_final = 155 °C - 63.7 °C = 91.3 °C

Phenacetin is more polar than aspirin because of its molecular structure. Phenacetin has a polar functional group, the acetamide group (-CONH2), which makes the molecule more polar overall. This group has a positive charge on the nitrogen atom and a negative charge on the oxygen atom, making it a dipole, or a molecule with a positive and negative end.

In contrast, aspirin has a non-polar functional group, the acetyl group (-COCH3), which does not have a dipole moment. This makes aspirin less polar overall.

The polarity of a molecule affects its solubility in different solvents. Polar molecules are soluble in polar solvents, such as water, while non-polar molecules are soluble in non-polar solvents, such as oil. Phenacetin is more soluble in water because of its polar functional group, while aspirin is less soluble in water because of its non-polar functional group.

In summary, phenacetin is more polar than aspirin because it has a polar functional group, the acetamide group, while aspirin has a non-polar functional group, the acetyl group. This difference in polarity affects the solubility of the two molecules in different solvents.