What is the activation energy for the reverse reaction? express your answer as an integer.

When compounding a sterile product, you should keep all supplies and manipulations at least  6 inches within the hood from all walls (including the filter) and the front edge of the hood.

What does a sterile compounding room mean?

A well-lit buffer space, an ante area, a storage area for sterile supplies and products, and both are secondary engineering controls are all included in the sterile compounding area. An space where a PEC is situated and where operations like preparation, compounding, and staging of CSPs take place is referred to as a buffer area (or "cleanroom").

When preparing a sterile product, you must keep all materials and operations at least 6 inches away from the hood's front edge, all walls (including the filter), and all manipulations.

To learn more about sterile compounding room from the given link below,

https://brainly.com/question/22978608

#SPJ4

The balanced chemical equation for the reaction that occurs when strong acid H₃O⁺ is added to the buffer:

C₅H₅N + H₃O⁺ → C₅H₅NH⁺ + H₂O

A buffer can be defined as a substance that prevents the pH of a solution from changing by either releasing or absorbing H⁺ in a solution.

Buffer is a solution that can resist pH change upon the addition of an acidic or basic components and it is able to neutralize small amounts of added acid or base, pH of the solution is relatively stable.

This buffer is example of weak acid (C₅H₅NH⁺) and its conjugate base (C₅H₅N).

C₅H₅NH⁺ gain protons from strong acid H₃O⁺.

More about buffer: brainly.com/question/4177791

#SPJ4

Aluminum is a metal whose temperature rises by 52.0 °C when it absorbs 4680 J of heat in a 100 g sample. It has low density, non-toxicity, high thermal conductivity, good corrosion resistance.

The unknown metal has a mass (m) of 100.g and absorbs 4680 J of heat (Q) resulting in a temperature rise of 52.0 °C (ΔT).

It has low density, non-toxicity, high thermal conductivity, good corrosion resistance, and can be quickly cast, machined, and formed. Non-magnetic and non-flammable. It is the second most malleable metal and the sixth most malleable metal.

Aluminum is a metal with a specific heat capacity of 0.900 J/g.°C.

Specific heat, the amount of heat required to raise 1 gram of a substance by 1 degree Celsius. The units for specific heat are usually calories or joules/grams/Celsius.

Learn more about Specific heat capacity here https://brainly.com/question/27991746

#SPJ4

The density of the liquid is 0.79.

Density can be determined by the ratio of mass and volume of a particular substance. It can be denoted by the symbol d. The concept of density is crucial because it enables us to predict which compounds will float and which ones will sink in a liquid. As long as an object's density is lower than that of the liquid's density, it will often float.

Density can be determined by the formula:

Density = mass / volume.

Given data:

Volume = 35.20mL

Mass = 28.54 g

Put the values of given data in above formula:

Density = 28.20 / 35.54

Density = 0.79 m³

Therefore, the density of the liquid will be 0.79.

To know more about density.

https://brainly.com/question/13289733

#SPJ1

The density of a liquid if a 35.2 mL sample has a mass of 28.548 g is 0.811 g/mL.

What is density?

Density is defined as the mass of the substance per unit of volume. It can be understood by the mass of a substance divided by its volume. Density is denoted using symbol ρ. Density of a liquid can be calculated by -

                                      ρ = m

                                             v

where,

ρ = density

m = mass

v = volume

Density is a physical property of a matter. Higher the density of a substance, higher will be its mass and volume. As long as an object's density is lower than that of the liquid's density, it will often float.

To calculate density of given liquid -

we have,

mass = 28.548 g

volume = 35.2 mL

Using the formula,

         Density =   mass  

                           volume

                    ρ = 28.548

                            35.2

                    ρ = 0.811 g/mL

Therefore, density of liquid is 0.811 g/mL or m³

To learn more about density,

brainly.com/question/13289733

#SPJ1

The difference between the sum of the measures of the interior angles in an octagon and the sum of the measures of the interior angles in a hexagon is 360°.

Interior angle refers to the angle inside a polygon that is formed by two of its adjacent sides. The sum of the measures of the interior angles of a polygon is given by the equation:

180°(n - 2)

where n is the number of sides

An octagon is a polygon that has 8 vertices and 8 sides. The sum of the measures of the interior angles of an octagon is:

180°(8 - 2) = 180°(6) = 1080°

On the other hand, a hexagon is a polygon that has 6 vertices and 6 sides. The sum of the measures of the interior angles of an octagon is:

180°(6 - 2) = 180°(4) = 720°

Subtracting the sum of the interior angles of the two polygons,

1080° - 720° = 360°

Learn more about interior angles here: https://brainly.com/question/7888180

#SPJ4

The partial pressure of helium (He) in the mixture containing 1 g of H₂ and 1 g of He is 0.16 atm

Partial pressure can be explained if each specific gas contributes a part of the total pressure and that part is the partial pressure of that gas.

At first to find Mole For H₂:

Mass of H₂ = 1 g

Molar mass of H₂ = 2 × 1 = 2 g/mol

Mole of H₂ =?

Mole = mass / molar mass

Mole of H₂ = 1/2

Mole of H₂ = 0.5 mole

To find the mole For He:

Mass of He = 1 g

Molar mass of He = 4 g/mol

Mole of He =?

As we know, Mole = mass / molar mass

Mole of He = 1/4

Mole of He = 0.25 mole

Total Mole = Mole of Hydrogen+ Helium

Total mole = 0.5 + 0.25

Total mole = 0.75 mole

Next, we shall determine the mole fraction of He.

Mole fraction = mole / total mole

Mole of He = 0.25 mole

Total mole = 0.75 mole

Mole fraction of He = 0.25 / 0.75

Mole fraction of He = 0.33

To determine the partial pressure of He.

Partial pressure = mole fraction × total pressure

Mole fraction of He = 0.33

Total pressure = 0.48 atm

Partial pressure of He = 0.33 × 0.48

Partial pressure of He = 0.16 atm

Therefore, the partial pressure of helium (He) in the mixture is 0.16 atm

Learn more about Partial pressure,

brainly.com/question/15712083

#SPJ4

The major intermolecular force that governs how soluble ethyl 4-benzoate's amine hydrochloride salt is in water is ion-dipole. In conclusion, (b) is the correct response.

Since water is polar and the amino hydrochloride salt of ethyl amino benzoate will be ionic, ion-dipole will be the predominant intermolecular force.

The electromagnetic forces between molecules of attraction or repulsion that operate between atoms and other types of nearby particles, such as atoms or ions, are examples of intermolecular forces (IMFs), also known as secondary forces.

The strongest intermolecular forces are ion-dipole forces. A powerful dipole-dipole interaction of a hydrogen atom and an extremely electronegative atom, like oxygen, nitrogen or fluorine is known as a hydrogen bond.

The complete question is:

What is the dominant intermolecular force that determines the solubility of the amine hydrochloride salt of ethyl 4-aminobenzoate in water?

a) ion-ion

b) ion-dipole

c) London dispersion

d) hydrogen bonding

Learn more about Intermolecular forces here:

https://brainly.com/question/13588164

#SPJ4

Answer:

57

Explanation:

Biochemical sequences that are similar to one another are found via BLAST. The application calculates the statistical significance by comparing nucleotide or protein sequences to sequence databases.

Advantages

1) Creating phylogeny

2) DNA analysis

Disadvantages

1) You require repeatable, unbiased outcomes.

2) Finding small sequences can be challenging

In addition to assisting in the identification of gene family members, BLAST can be used to infer functional and evolutionary links between sequences.

Learn more about Nucleotide sequences here

https://brainly.com/question/1569358

#SPJ4

The byproduct of fermentation that creates the characteristic holes in swiss cheese is a. carbon dioxide.

Swiss cheese is a cheese made in Switzerland.

Swiss cheese is, usually, a semihard cheese made from cows milk with a characteristic holes.

Fermentation of milk is a metabolic process in which lactic acid and carbon dioxide are produced from sugar lactose:

C₆H₁₂O₆ → CH₃CHOHCOOH + C₂H₅OH + CO₂

Carbon dioxide (CO₂) is a gas. It gets stuck in swiss cheese and it makes bubbles, which make holes.

Fermentation is a way of extracting energy from molecules and it is the oldest metabolic pathway.

More about fermentation: brainly.com/question/11554005

#SPJ4

The heat of reaction is obtained as 190 kJ/mol .

The term heat of reaction is used to show the energy that is absorbed or emitted in a reaction. Recall that a reaction is exothermic when heat is given out and the reaction is endothermic when heat is absorbed.

In this case;

H- H bond energy = 436 kJ/mol

Cl - Cl bond energy = 242 kJ/mol

H - Cl bond energy = 432 kJ/mol

Then we know that;

ΔH reaction = ∑H products - ∑H reactants

We now have;

ΔH reaction = 2(432 kJ/mol) - [242 kJ/mol + 432 kJ/mol]

ΔH reaction =  864  kJ/mol - 674 kJ/mol

ΔH reaction = 190 kJ/mol

Learn more about heat of reaction:https://brainly.com/question/16648056

#SPJ1

Answer:

23g/mole

Explanation:

And whereas one sodium atom has an approximate mass of 23 u, 1 mol of Na atoms has an approximate mass of 23 grams. One mole of a substance has the same mass in grams that one atom or molecule has in atomic mass units.

The element iodine appears in Period 5 of the Periodic Table. This means that an iodine atom has five orbitals in its electron cloud. so the correct option is (b).

As a member of group 7, iodine possesses seven outer electrons. Since it is in the fifth period, its electrons will be in orbitals 5s and 5p. The chemical formula for iodine is 5s25px25py25pz1.

total amount of electrons that could occupy each orbital

Again using iodine as an example, we can observe on the periodic table that it has an atomic number of 53. ( In neutral state it contains 53 electrons). The configuration of the entire electron cloud is 1s22s22p63s23p64s23d104p65s24d105p5.

Iodine is a trace element that can be found as a dietary supplement, as well as naturally in some foods and some forms of salt. Iodine is a necessary component of the thyroid hormones triiodothyronine (T3) and thyroxine (T4) (T3).

To know more about Iodine, visit:

https://brainly.com/question/6773013

#SPJ9

The acceleration of the object is 12 m/s².

Given:

Force = 72N

Mass = 6 kg

To calculate acceleration apply the formula,

Acceleration = Force/mass

                     = 72N / 6kg

                     = 12 m/s²

Therefore, the acceleration of the object is 12 m/s².

To learn more about acceleration visit:

https://brainly.com/question/12550364

#SPJ9

Option D) is the correct option. The role of the catalyst is to provide a new pathway for the reaction to take place which has lower activation energy.

The function of the catalyst is to change the rate of reaction without interfering with the reaction itself or without getting consumed in the reaction itself.

Catalyst only affects the activation energy of the reaction and does not change the enthalpy difference of the reaction. In other words, the final and initial energy of the product and reactant respectively remains the same even in presence of the catalyst.

In options C) and B) the final and initial energy of the reaction is different for both pathways, hence these are incorrect.

In option A) the activation energy of the uncatalyzed reaction is less than the catalyzed one which is not possible.

Therefore Option D) is the correct reaction pathway showing the effect of catalyst on an uncatalyzed reaction.

LEARN MORE ABOUT CATALYSTS HERE: https://brainly.com/question/847624

#SPJ4

Your question was incomplete. Please check below the full content

IUPAC name of vinylcyclohexane is vinylcyclohexane, ethynylcyclohexane  is 1-ethynylcyclohexane, allylcyclohexane  is prop-2-enylcyclohexane and of acetylcyclohexane is 1-Cyclohexylethan-1-one.

IUPAC stands for International Union of Pure and Applied Chemistry. It is the universally-recognized authority on chemical nomenclature. It is based on naming the molecule's longest chain of carbons connected by single bonds, whether in a continuous chain or in a ring.

It creates a standardized way to name chemical compounds. The use of Common names can lead to confusion and misinformation.

IUPAC name of vinylcyclohexane is 1-ethenylcyclohexane.

IUPAC name of ethynylcyclohexane  is 1-ethynylcyclohexane.

IUPAC name of  allylcyclohexane is prop-2-enylcyclohexane.

IUPAC name of acetylcyclohexane is 1-Cyclohexylethan-1-one.

To know more about IUPAC Naming refer to the link:

https://brainly.com/question/27888104

#SPJ4

Partial pressure = total pressure * volume of gas.

Partial pressure of oxygen (po2) = 1*0.5 = 0.5 atm L

what is partial pressure?

According to Dalton's Law of Partial Pressure, the total pressure of a gas mixture is equal to the sum of the partial pressures of all the constituent gases that make up the mixture. Dalton's Law of Partial Pressure has a straightforward equation.

It claims that the overall pressure exerted by the combination of non-reactive gases is equal to the sum of the partial pressures of the various gases. The pressure applied by each individual gas in a gas mixture is referred to as partial pressure.

Partial pressure = total pressure * volume of gas.

Thus, given here,

volume = 0.5 l

Pressure = 1 atm at STP

Therefore, partial pressure of oxygen = 1*0.5 = 0.5 atm L

To learn more about partial pressure from the given link below,

https://brainly.com/question/28116497

#SPJ4

A weak acid and its conjugate base are typically present in a buffer solution. When H+ is added to a buffer, the conjugate base of the weak acid accepts a proton (H+), “absorbing” the H+ before the pH of the solution drops significantly. The buffering region is approximately 1 pH unit on either side of the conjugate acid’s pKa. The buffering region’s midpoint occurs when one-half of the acid reacts to dissociation

A titration curve graphically depicts buffer capacity. The middle of the curve is flat because the addition of base or acid has little effect on the pH of the solution. This is known as the buffer zone. When a small amount of acid or base is added to the buffer system.

This portion of the titration curve corresponds to the buffer region: it exhibits the smallest change in pH per increment of an added strong base.

The acid-base properties of the solution are dominated by the equilibrium for dissociation of the weak acid, corresponding to Ka, in the region of the titration curve at the lower left, before the midpoint. The acid-base properties of the solution are dominated by the equilibrium for the reaction of the conjugate base of the weak acid with water, corresponding to Kb, in the region of the titration curve at the upper right, after the midpoint. However, because Ka and Kb are related by Kw, we can calculate one from the other.

For more information on buffer region click on the link below:

https://brainly.com/question/24188850

#SPJ4

The layer of ethyl alcohol forms on the surface if some ethyl alcohol is poured into the container after the ice cube has melted.

The density of a substance is its mass per unit volume.

The SI derived unit for density is the kilogram/cubic meter, but chemist usually use gram per cubic centimeter.

Ethyl alcohol has lower density of water, so it would form on the surface.

The density of the water is an around 1000 kg/m³.

Mass is a fundamental measure of the amount of matter in the object.

Volume is the amount of space that a substance occupies.

More about density: brainly.com/question/1354972

#SPJ4

Since silicone breast implants need a security and the implanter is required to guarantee and replace the implant fixture by the business or manufacturer in accordance with their rules, silicone breast implants are protected by UCC Article 2 warranties.

As per the mandate, drugs, medications, stents, implants and other consumables and incidentals given to patients during a medical procedure or treatment cannot be considered to be the sale of commodities and are therefore subject to taxation under state laws.

Hence, breast implants are covered under UCC Article 2 warranties and silicone gel implantation does not constitute sale of goods via the surgeon.

To read more about uniform commercial code (ucc) visit:

https://brainly.com/question/15980446

#SPJ4

Three samples of sodium chloride are analyzed and found to contain differing percent by mass of chlorine this indicates that only one solution has actual content of chlorine.

There may be differential volume of chlorine in sodium chloride solution in Nacl the mass percent of chlorine should be 60.8%.

With respect to 1 mole sodium chloride,

Mass of sodium in sodium chloride =23 g

Mass of chloride in sodium chloride =35.5 g

Total mass of sodium chloride =58.5 g

% of chlorine in NaCl =

58.5/35.5×100 = 60.85

​

To learn more about sodium chloride:

https://brainly.com/question/9811771

#SPJ4

In addition to mass, physicists' two commonly used dimensions to derive additional measurements are length and time.

The SI system's fundamental units are those of the basic physical quantities that are not created from other units. There are seven fundamental units, including the meter, kilogram, ampere, and second. Derived units are those which are calculated and expressed with the help of above mentioned fundamental quantities.

The dimensional formula of any quantity is the expression that specifies the powers to which the fundamental units should be raised in order to obtain one unit of a derived quantity. It is written as [M^aL^bT^x] where a, b, and x are the power to which the fundamental quantity is raised.

Therefore the additional two dimensions used by the physicists to derive additional measurements are length and time.

LEARN MORE ABOUT DIMENSIONAL ANALYSIS HERE:

https://brainly.com/question/18559676

#SPJ4

Phosphoric acid (H3PO4) has three dissociable protons, with the pKa's.

With the chemical formula H3PO4, phosphoric acid, also known as orthophosphoric acid, monophosphoric acid, or phosphoric(V) acid, is an inorganic solid that contains phosphorus. Colorless and odorless, phosphoric acid is a substance. In its most common form, an 85% aqueous solution, it appears as a syrupy liquid that is colorless, odorless, and non-volatile. Considering that many fertilizers include it, it is a significant industrial chemical.

Acid makes up the substance. The phosphate ion PO results from the removal of all three H+ ions. H2PO, or hydrogen phosphate, is produced when one or two protons are removed, correspondingly. Organophosphate esters are produced by phosphoric acid.

To learn more about Phosphoric acid from the given links:

https://brainly.com/question/27983519

#SPJ4

The pH of a mixture of 0.25 m acetic acid (CH3COOH) and 0.1 m sodium acetate (CH3COO- Na ) in a total volume of 1 l is 4.37.

The above situation represents a case of buffer solution.

Buffer solutions are those solutions that can resist change in their pH if any acid or base is added to them.

To calculate the pH of a buffer solution, the Henderson-Hasselbalch equation is used

pH = pKa + log [Salt]/[Acid]

Putting

pKa = 4.76

[Salt] = Concentration of sodium acetate = 0.1 M

[Acid] = Concentration of acetic acid = 0.25 M

pH = 4.76 + log [0.1]/[0.25]

pH = 4.76 + log[0.4]

pH = 4.76 - 0.39

pH = 4.37

Hence, the pH of a mixture of 0.25 m acetic acid (ch3cooh) and 0.1 m sodium acetate (ch3coo- na ) in a total volume of 1 l is 4.37.

To know more about "buffer solution", refer to the link given below:

https://brainly.com/question/24262133?referrer=searchResults

#SPJ4

manganese(ii) sulfate and chromium(ii) nitrate precipitation reaction takes place.

Manganese(II) sulfate MnSO₄ and chromium nitrate Cr(NO₃)₂ are both water-soluble ionic compounds. When mixed in solution, the following constituent ions are formed:

Mn2+, Cr2+ NO

Possessing relatively good water solubility, manganese(II) nitrate remains dissolved in solution. . However, calcium sulfate is insoluble and common to most ionic compounds that bind Group 2A metal cations and sulfate anions. Therefore, a precipitation reaction takes place. The balanced molecular reaction equation is:

MnSO₄(aq) + Cr(NO₃)₂(aq) → CrSO₄

The ionic formula describes all strong electrolyte species in terms of fully dissociated ionic components.

Mn2+(aq) + SO2(aq) + Cr₂+(aq) + 2N

The net ion equation excludes manganese (II) and nitrate spectator ions.

Dissolution completely dissociates both reactant compounds into their constituent ions, allowing these ions to pair to form two new ionic compound products. A key feature is that one of these products is relatively insoluble in water, which can usually be predicted without calculation. The net ion equation for the precipitation reaction system focuses on the formation of this solid insoluble product so that all spectator ions are removed.

Learn more about double displacement reaction here https://brainly.com/question/23918356

#SPJ4

Answer:

Reactants are starting materials and are written on the left-hand side of the equation. Products are the end result of the reaction and are written on the right-hand side of the equation.

The Heisenberg uncertainty principle is true at the atomic level because  we cannot simultaneously determine the accuracy of both velocity and the position of a particle.

Heisenberg's Uncertainty Principle states that there is inherent uncertainty in the act of measuring a variable of a particle.

The Heisenberg uncertainty principle was found to be contrary to classical Newtonian physics which stipulates that all variables of particles to be measurable to an arbitrary uncertainty given standard equipment.

The Heisenberg uncertainty principle is true at the atomic level because  we cannot simultaneously determine the accuracy of both velocity and the position of a particle.

Learn more about Heisenberg uncertainty principle :

https://brainly.com/question/11488878

#SPJ1

Answer:

y= .31120332x