The amount of molecules= 3.01 x 10²⁴
Further explanationGiven
5 moles of N2
Required
The number of molecules
Solution
The mole is the number of particles(molecules, atoms, ions) contained in a substance
1 mol = 6.02.10²³ particles
Can be formulated
N=n x No
N = number of particles
n = mol
No = Avogadro's = 6.02.10²³
For 5 moles :
= 5 x 6.02 x 10²³
= 3.01 x 10²⁴
which of these hypothesis is not falsifiable?
a. there is life on other planets.
b. our sun will burn out within the next billion years.
c. the universe is stagnant.
d. jupiter is the best planet in our solar system.
Answer: it is D
Explanation:its D cause that is a opinion it is not sientificly correct
A mole of Br2 and a mole of CH2Br2
Select one:
A. have a mass of 1g each
B. contain the same number of molecules
C. contain one molecule each
D. have the same mass
The term mole is defined as the amount of substance of a system which contains as many elementary entities. A mole of Br₂ and a mole of CH₂Br₂ have a mass of 1g each. Therefore, option A is correct.
What do you mean by mole ?The term mole is defined as the amount of substance of a system which contains as many elementary entities.
1 mole is equal to 6.023 × 10 ²³ molecules.
One mole of any substance is equal to 6.023 × 10²³ units of that substance such as atoms, molecules, or ions. The number 6.023 × 10²³ is called as Avogadro's number or Avogadro's constant.
The mole concept can be used to convert between mass and number of particles.
A mole of Br₂ and a mole of CH₂Br₂ have a mass of 1g each. Because one mole of substance is equal to 6.023 × 10 ²³ molecules.
Thus, option A is correct.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ5
Select the set of coefficients that would balance the following equation:
S + HNO3 →
H2SO4 + NO2 + H2O
O 3, 2, 2, 3,1
O 6, 2, 2, 6, 2
O 1.6, 1, 2,6
O 1,6, 1, 6,2
Select the correct answer.
Which statement best describes how chemical equations demonstrate conservation of mass?
A.
The number of reactants is the same as the number of products.
B.
The compounds are the same on each side of the reaction.
C.
The number of atoms of each element is the same on each side of the equation.
D.
The state of matter is the same on each side of the equation.
Answer:
All of the Above
A.The number of reactants is the same as the number of products.
B.The compounds are the same on each side of the reaction.
C.The number of atoms of each element is the same on each side of the equation.
D.The state of matter is the same on each side of the equation.
Explanation:
Answer:
C
Explanation:
I did the test
In which of these do you need to know the direction in which the object is moving?
velocity
instantaneous speed
average speed
mass
Answer:
velocity
Explanation:
Elements make up all things. What is it called
Answer:
Matter
Explanation:
All matter is made up of substances called elements
Give an example of elastic potential energy
Answer:
An archer's stretched bow.
Explanation:
Elastic potential energy is energy stored as a result of applying a force to deform an elastic object.
What is the density of an
object that has a mass of
120 g and volume of 5 ml?
The density of an object ρ = 24 g/ml
Further explanationGiven
mass of an object = 120 g
volume = 5 ml
Required
The density
Solution
Density is a quantity derived from the mass and volume
Density is the ratio of mass per unit volume
Density formula:
[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]
ρ = density
m = mass
v = volume
Input the value :
ρ = 120 g : 5 ml
ρ = 24 g/ml
help me out please!?
Answer:
area a
Explanation:
If 10.0 L of nitrogen gas reacts with 16.0 L of hydrogen gas, how many liters of ammonia gas (NH3) will be
produced?
Volume of ammonia gas : 10.67 L
Further explanationGiven
10.0 L of nitrogen gas
16.0 L of hydrogen gas
Required
Volume of ammonia gas
Solution
Reaction
N₂ + 3H₂ ⇒ 2NH₃
From Avogadro's hypothesis, at the same temperature and pressure, the ratio of gas volume will be equal to the ratio of gas moles
Find limiting reactant :
N₂ : 10 : 1 = 10
H₂ : 16 : 3 = 5.3
H₂ as a limiting reactant
So volume of NH₃ based on H₂
= 2/3 x volume H₂
= 2/3 x 16 L
= 10.67 L
8. Which type of bond results when one or more valence
electrons are transferred from one atom to another?
A) a hydrogen bond
B) an ionic bond
C) a nonpolar covalent bond
D) a polar covalent bond
Answer:
B
Explanation:
The Independent Variable is:
Kinetic Energy
Height
Mass
Speed
How many Joules of heat are required to melt 250 grams of ice at 0°C?
AHfus = 334 J/g
AHvap = 2258 J/g
Cp= 4.184 J/g C
Answer:
cp =4.184/c / j
Explanation:
ahvap=2258j/g
Heat required : Q = 83500 J = 83.5 kJ
Further explanationGiven
mass ice = 250 g at 0°C
Required
The heat required
Solution
The heat to change the phase can be formulated :
Q = m.Lf (melting/freezing)
Lf=latent heat of fusion
Input the value :
Q = 250 g x 334 J/g
Q = 83500 J
A by-product of photosynthesis that is not used by the plant, but rather released into the air, is ________________.
Answer: I think is carbon dioxide!!
Explanation: ( i havent learned about photosynthesis in a long time :) )
hope i helped!! also have a good day!
The theory of _______ of matter states that cannot be created or destoryed
Word bank: Matter Volume Element Conservation Mass Atoms Properties
Answer:
mass pic is explanation hope it helps
nuclear energy is created through the process of splitting apart atoms and releasing large amounts of heat energy that can be converted to electrical energy.this process is known as?
Which organelle of a prokaryotic cell contains genetic information?
cell membrane
ribosomes
nucleus
nucleoid
Answer:
The right option is the 4 one. nucleoid
Prokaryotic cells are simple cells that lack a definite nucleus and some membrane-bound organelles. Prokaryotic cells have a nucleoid region, which is an irregularly-shaped central region of the cell that contains the cell’s genetic information (DNA). Other organelles that can be found in prokaryotic cells include plasma membrane, cell wall, cytoplasm, and ribosomes.
Explanation:
Answer:
nucleoid
Explanation:
A chemical process used to produce ethanol as a fuel additive was expected to produce 5,000 kilograms of ethanol based on the amounts of starting materials used, but only 4,760 kilograms were produced. What was the percent yield for ethanol in this process?
A)1.09
B)4.80
C)95.2
D)105
Answer:
C)95.2
Explanation:
Given parameters:
Expected yield = 5000kg
Experimental yield = 4760kg
Unknown:
Percentage yield = ?
Solution:
The percentage yield of the substance is determined by find the ratio of the true experimental yield to the expect yield and multiply by 100;
Percentage yield = [tex]\frac{4760}{5000}[/tex] x 100 = 95.2%
A boy sets up a picnic on the beach next to a sand dune. how are sand dunes formed?
Answer:
Sand dunes are created when wind deposits sand on top of each other until a small mound starts to form. Once that first mound forms, sand piles up on the windward side more and more until the edge of the dune collapses under its own weight.
How many grams of NH3 can be dissolved in 50 grams of water at 50oC?
15 grams of NH3 can be dissolved
Further explanationGiven
50 grams of water at 50°C
Required
mass of NH3
Solution
Solubility is the maximum amount of a substance that can dissolve in some solvents. Factors that affect solubility
1. Temperature: 2. Surface area: 3. Solvent type: 4. Stirring process:We can use solubility chart (attached) to determine the solubility of NH3 at 50°C
From the graph, we can see that the solubility of NH3 in 100 g of water at 50 C is 30 g
So that the solubility in 50 grams of water is:
= 50/100 x 30
= 15 grams
List four rules for rounding numbers.
Answer:
the number you are rounding is followed by 5, 6, 7, 8, or 9, round the number up. Example: 38 rounded to the nearest ten is 40
If the number you are rounding is followed by 0, 1, 2, 3, or 4, round the number down. Example: 33 rounded to the nearest ten is 30
Rounding fractions works exactly the same way as rounding whole numbers. The only difference is that instead of rounding to tens, hundreds, thousands, and so on, you round to tenths, hundredths, thousandths, and so on.
By rounding off, you could easily figure out that you would need about $6.00 to pay for your groceries.
which part of the plant you think is the least important?
Answer:
Well maybe the pedals they don't help much
Explanation:
Answer:
brainliest please
Explanation:
the pollen probably because other plants have it
The stability of atomic nuclei is most affected by the
a)number of N
b) number of e
c) number of P
d) ratio of N to P
ASAP PLZZ
HELP ASAP DUE IN 5 MINUTES
the second one i think, hope this helps
Answer:
a
Explanation:
A gas that exerts a pressure of
15.6 psi in a container with a volume of
L will exert a
pressure
of
25.43 psi when transferred to a
container with a volume of 1.895 L.
Answer:
V1 = 3.09 L
Explanation:
Initial Pressure, P1 = 15.6 psi
Initial Volume, V1 = ?
Final Pressure, P2 = 25.43 psi
Final Volume, V2 = 1.895 L
The relationship between these quantities is given by boyles law;
V1P1 = V2P2
V1 = V2P2 / P1 = 1.895 * 25.43 / 15.6
V1 = 3.09 L
A solid has shape and volume?
Answer:
A solid has a definite volume and shape, a liquid has a definite volume but no definite shape, and there is no definite volume or shape of a gas. Usually, the transition from solid to liquid does not change a substance's volume substantially.
Explanation:
What rule/principle States that electrons fill orbital from lowest energy to highest energy?
A: Aufbau principle
B: Hund's rule
C: Pauli exclusion principle
The orbital filling and electron configuration are based on various principles. The Aufbau principle states that electrons fill the orbital from lowest to highest energy levels. Thus, option A is correct.
What is the Aufbau principle?The Aufbau principle is the rule that states about the filling of the electron in the various orbitals of an atom. It defines the filling of the lower atomic orbitals before the higher levels are filled.
This principle allows for determining the electronic configuration of the atom. The rule states that the electron first occupies the lowest energetically unrestricted orbits that can hold a certain number of electrons. The electron can only move to a higher level when the electron is filled in the previous subshell.
Therefore, option A. the Aufbau principle gave the filling of electrons in the lowest energy level.
Learn more about the Aufbau principle here:
https://brainly.com/question/15006708
#SPJ6
3. Iron + copper sulphate
Will it react
Answer: Iron displaces copper ions from an aqueous solution of copper sulphate. ... In this reaction, metallic iron is converted into ferrous ion (Fe2+) and cupric ion (Cu2 +) is converted into metallic copper. Fe (s) + Cu2 + (aq) —→ Fe2+ (aq) + Cu (s).
Explanation:
4) What is the Formula weight of MgCl2 and the explanation.
95.21 g/mol
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableExplanation:Step 1: Identify
MgCl₂
Step 2: Find Formula Weight
[PT] Molar Mass of Mg - 24.31 g/mol
[PT] Molar Mass of Cl - 35.45 g/mol
Molar Mass of MgCl₂ - 24.31 + 2(35.45) = 95.21 g/mol
Balance the equation
AgBr +
GaPO4 →
Ag3PO4 +
GaBi3
Answer:
3AgBr + GaPO4 ----> Ag3PO4 + GaBr3Explanation:
