The basic sequence of events in the design process typically involves:
identifying the problem or need, gathering information and requirements, brainstorming and conceptualizing solutions, creating a detailed design plan, developing a prototype, testing and refining the prototype, and finally producing the final product.First, the problem or need is identified and information is gathered to better understand the requirements and constraints for the solution. Next, various solutions are brainstormed and a preferred solution is selected. A detailed design plan is then created, outlining the product's characteristics and technical specifications. From there, a prototype is developed and tested, with customer feedback and refinement being incorporated into the design as needed. Finally, the product is manufactured, distributed, and marketed to customers. The entire process is iterative and may involve multiple rounds of testing and refinement to achieve the desired outcome.To know more about prototype visit:
https://brainly.com/question/28370530
#SPJ1
Is dis rite?
Ples answer
Answer:
yass its right
Explanation:
When selecting a ENGR problem, what would be appropriate criteria. Select all possible answers.
Note that when selecting an Engineering Problem, the appropriate criteria are:
The selected criteria ensure that an engineering problem is both feasible and relevant.
The problem should be accomplishable within given constraints, interesting to the team, and meet a specific need. It is also important to consider potential marketability through initial research, target audience, and competitors.
Learn more about Engineering Problems:
https://brainly.com/question/25086863
#SPJ1
Which of the following brake fluid properties are necessary to
meet DOT specifications?
A) Low freezing point.
B) Ability to absorb moisture.
C) A boiling point over 400 degrees Fahrenheit.
D) All of the above.
All of the above. These properties are necessary to ensure safe and effective braking performance in a variety of driving conditions.
What is DOT specifications?
According to the Department of Transportation (DOT) specifications, brake fluid must have a low freezing point, the ability to absorb moisture, and a boiling point over 400 degrees Fahrenheit.
DOT stands for the Department of Transportation, which is a federal agency responsible for the regulation of transportation-related issues in the United States.
The DOT was established in 1966 and is responsible for promoting and regulating various modes of transportation, including highways, aviation, and maritime transportation.
The DOT's responsibilities also include the formulation of national transportation policy and the administration of various programs and activities aimed at improving transportation safety and efficiency.
To know more about braking , visit: https://brainly.com/question/28412116
#SPJ1
Of all of the important economic impacts of globalization, which of these is least significant?
International supply and demand may lead to more reliance on new technologies.
Goods produced internationally may meet different quality standards, fueling a need for more quality control.
Consumers demand products at lower prices, which leads to outsourcing.
As information is more widespread, consumers demand product and service offerings available outside of their own nation.
Answer:
It is difficult to say that any of the impacts of globalization is "least significant," as all can have major effects on different aspects of the economy. However, if one were to prioritize the impacts based on their significance, it could be argued that "international supply and demand may lead to more reliance on new technologies" may be the least significant, as it is one of several consequences of globalization and is likely to be influenced by other factors as well.
Explanation:
The functions f and g are defined as
f:x-5x-7
5x/x +4
(b) Find gf(2.6)
The value of the function that given will be 3.
How to calculate the functionIt should be noted that a function simply has to do with the statement that illustrates the variables given. In this case, it is vital to note that two or more components are considered in order to be able to describe the scenario.
In this case, f(2.6) will be:
= 5(32.6) - 7
= 13 - 7
= 6
g(6) = 5(6) / 6+4
= 30 / 10
= 3
Learn more about functions on:
brainly.com/question/10439235
#SPJ1
Trevor made the following table to compare the energy transformations of four household objects that use electrical energy. Which of the following would best replace X?
Form of Energy Used Other Form of Energy
Transformed By Item
Microwave Electrical Energy Heat
Blender Electrical Energy Energy of Motion
Doorbell Electrical Energy Heat
Lamp Electrical Energy X
Energy of Motion
Heat
Light
Sound
PLS HELP ME RIGHT NOW
The best replacement for X in the table would be "Light," as a lamp uses electrical energy to transform it into light energy.
When an electrical current flows through the lamp's filament, it heats up and emits light, creating a visible source of illumination.This process is an example of energy transformation, as the lamp converts electrical energy into another form of energy - in this case, light. Other examples of energy transformation listed in the table include the microwave converting electrical energy into heat energy, the blender converting electrical energy into energy of motion, and the doorbell converting electrical energy into sound energy.Understanding these energy transformations is important for understanding the workings of household appliances and for conserving energy. By using appliances that are more efficient at converting energy, such as LED lamps instead of incandescent lamps, individuals can reduce their energy consumption and environmental impact.To know more about transformation visit:
https://brainly.com/question/14299753
#SPJ1
Which of the following manufacturing careers is not responsible for actual production work? (Select all that apply.)
engineer
human resources manager
information technology specialist
sales and marketing
In the following industrial occupations, information technology specialists are not accountable for carrying out actual production activity. Installing hardware and software while reviewing general system requirements
A decent career in information technology?One of the occupations with the greatest growth rates is technology. An information technology degree is worthwhile since it offers a high rate of return on investment. There is double-digit yearly increase in a few professions, including cybersecurity professionals, network designers, and web developers.
An IT job is what?Any employment that includes the implementation, support, upkeep, maintenance, repair, or security of data or computer systems is classified as an IT job. The most typical examples of IT employment are those that work on the creation, implementation, or upkeep of the programs or systems that other people utilize.
To know more about Information technology visit:
https://brainly.com/question/14426682
#SPJ1
What requirements are necessary to protect an electric tool user from shock?
Tools must have a three-wire cord and be grounded
Tools must be double insulated or powered by a low-voltage isolation transformer
Both A and B
None of the above
Both A and B. Tools must have a three-wire cord and be grounded, or be double insulated or powered by a low-voltage isolation transformer to protect the user from electric shock.
What is the electric tool about?Electric tools can be dangerous if not properly designed and used. One potential hazard is electric shock, which can occur when an electrical current passes through the human body. To protect electric tool users from shock, there are two common approaches:
Double insulation or low-voltage isolation: Tools that do not have a ground prong can still be safe if they are designed with two layers of insulation, or are powered by a low-voltage isolation transformer. These approaches provide a barrier of insulation between the electrical current and the user, reducing the risk of shock.
Lastly, Grounding: Tools with metal cases or exposed metal parts must have a three-wire cord with a ground prong and be plugged into a properly grounded outlet. If there is a fault in the tool that could electrify the metal parts, the fault current will flow to ground, protecting the user from shock.
Learn more about electric tool from
https://brainly.com/question/13226398
#SPJ1
Why do careers in the manufacturing sector pay their workers more than careers in the service sector?
Manufacturing workers are more productive than service workers.
Service workers work more hours than manufacturing workers.
Service workers are not eligible for overtime.
Service workers receive more benefits than manufacturing workers.
Manufacturing workers typically receive higher wages because their jobs require a higher level of skill and pose greater physical demands than service workers. Manufacturing workers also tend to require a higher.
What is the Manufacturing ?Manufacturing is the process of transforming raw materials into finished products through the use of physical processes such as machining, casting, molding, stamping, assembling, and welding. It is a vital part of the production process, as it involves physically constructing products from component parts. Manufacturing involves a range of activities, from the design of products to the assembly and packaging of them. It also involves the development of assembly lines and other processes to ensure efficient and cost-effective production. Manufacturing processes are also used to produce components for other industries, such as automotive, aerospace, and medical.
To learn more about Manufacturing
https://brainly.com/question/13440987
#SPJ1
What effect did the Great Recession have on manufacturing employment?
An average of more than 50,000 jobs was lost every month for 10 years.
An average of more than 100,000 jobs was lost every year for 10 years.
An average of more than 500,000 jobs was lost every year for 10 years.
An average of more than 10,000 jobs was lost every month for 10 years.
The correct answer is "An average of more than 500,000 jobs was lost every year for 10 years."
What is the Great Depression?The Great Recession, which lasted from December 2007 to June 2009, had a significant impact on manufacturing employment in the United States.
According to the Bureau of Labor Statistics, the manufacturing sector lost an average of more than 500,000 jobs per year during the first decade of the 21st century.
This represented a significant decline in the number of manufacturing jobs, and many workers in this sector were affected by the economic downturn.
Read more about The Great Depression here:
https://brainly.com/question/441267
#SPJ1
High-reach support stands should be used to stabilize a raised vehicle and when a particularly heavy part is to be removed from the vehicle.
The statement "To stabilize a lifted vehicle and when removing a particularly heavy part from the vehicle, high-reach support stands should be employed." is true.
What is high-reach support?When a vehicle is elevated and a particularly heavy element needs to be removed from it, high-reach additional stands should be utilized to steady the vehicle. Never tie or block an operating control in an open position.
For tasks requiring significant weight displacement or shaking the vehicle, use high-reach vehicle support platforms to help stabilize it.
Therefore, the statement is true.
To learn more about high-reach support, refer to the link:
https://brainly.com/question/28357683
#SPJ9
The question is incomplete. Your most probably complete question is given below:
True or false.
What is the primary difference between a manufacturing business and a service business?
Service companies offer customer support for the goods they produce.
Manufacturers deliver tangible goods; service companies provide intangible goods.
Manufacturers deliver services only.
There are no differences.
The main distinction between a manufacturing company and a service company is that the former produces tangible items while the latter offers intangible ones.
What is tangible and intangible goods?A non-financial item that cannot be seen or handled is an intangible asset. According to Florence Bessette, Business Advisor at BDC Advisory Services, "Patents or goodwill are appropriate examples." Physical objects make up tangible assets. Land, structures, automobiles, furnishings, and equipment are some examples. Products with a physical aspect, such as clothing or household items, are referred to as tangible goods. Products that a business sells that are not physical in nature are referred to as intangible goods. Most frequently, digital goods like software and licenses are the most well-liked.
What is difference between tangible and intangible?An intangible asset is one that doesn't exist physically. Compared to a physical asset, it is more challenging to trade. A tangible asset exists physically. Comparatively speaking to an intangible asset, it is comparatively simple to trade.
To know more about Tangible and Intangible visit:
https://brainly.com/question/29840541
#SPJ1
If functional groups are unable to work together effectively, what changes might you suggest to improve productivity and efficiency?
suggest that the CEO or president act as the clearinghouse
institute a product-based organizational system
additional data collection and analysis
provide mediation when functional groups disagree
The change that might you suggest to improve productivity and efficiency is to provide mediation when functional groups disagree. Thus, the correct option for this question is D.
What is meant by Productivity?Productivity may be characterized as a type of measurement that includes the overall consumption and production of anything with specific efficiency. It's the quantity of output produced.
In this case, when functional groups are unable to work together effectively, it's important to provide mediation when functional groups disagree. This is because it gives them an actual idea and concept to build and make a strategy that enhance the level of productivity.
Therefore, the change that might you suggest to improve productivity and efficiency is to provide mediation when functional groups disagree. Thus, the correct option for this question is D.
To learn more about Productivity and efficiency, refer to the link:
https://brainly.com/question/9563570
#SPJ1
Describe the positive impact of new technologies on manufacturing
Technology in manufacturing has many positive outcomes. Automation can:
Improve quality: Automation controls the schedules and production lines without human interference. The program can optimize the schedule to reduce defects and inefficiencies, creating better-quality products.Reduce costs: Technology can operate with better efficiency, less waste, and fewer workers, creating long-term cost savings.Decrease production time: Manufacturing technology expedites the production process, so more batches can be made more quickly. You can create more products in less time and have a consistent run rate.Optimize the supply chain: The entire supply chain benefits from procurement and production that follows the delivery schedule.Have more consistent results: Automated technology is more consistent and eliminates the mistakes error-prone humans are more likely to create.Foster a safer workplace: Machines can do jobs that are dangerous for workers, preventing injury and risk. Technology can also identify risks and develop safety measures.Which of the following reasons for a proposed regulation might be important for a legislator voting on the issue to consider? (Select all that apply.)
The fair implementation of this regulation might require a level of technology that is unavailable to many in the industry or that does not yet exist in any reliable form.
The regulation concerns a safety issue that could have a major effect on people in the area affected.
It has been at least two decades since a regulation in this area has been passed.
The regulation will interact with employment law in that it will impose certification burdens on companies and workers that could eventually lead to terminations and lawsuits based on those terminations.
Answer:
The following reasons might be important for a legislator voting on a regulation:
The regulation concerns a safety issue that could have a major effect on people in the area affected.
The regulation will interact with employment law in that it will impose certification burdens on companies and workers that could eventually lead to terminations and lawsuits based on those terminations.
Explanation:
What are some functional and aesthetic qualities in Shigeru Ban's design?
Some functional and aesthetic qualities in his design:
Functional qualities:
Sustainability: One of the key functional qualities of Shigeru Ban's design is its emphasis on sustainability.
Who is Shigeru Ban?Shigeru Ban is a Japanese architect known for his innovative and sustainable designs
Other functional qualities are:
Flexibility: Shigeru Ban's designs often incorporate flexible and adaptable elements that allow for easy reconfiguration or dismantling.
Efficiency: Shigeru Ban's designs often emphasize efficiency in terms of space, material use, and construction methods. This allows him to create structures that are both functional and cost-effective.
Aesthetic qualities:
Minimalism: Shigeru Ban's designs often exhibit a minimalist aesthetic, with clean lines, simple shapes, and an emphasis on functionality over ornamentation.
Lightness: Shigeru Ban's structures often appear light and airy, with an emphasis on transparency and an open, uncluttered feel.
Natural materials: Shigeru Ban's designs often incorporate natural materials such as wood and paper, creating a connection to the environment and a sense of warmth and natural beauty.
Read more about designs here:
https://brainly.com/question/1020696
#SPJ1
What is the significance of lithium battery manufacturing?
The U.S. government treated their manufacture as critical to economic recovery.
They could replace other green initiatives in the auto industry.
The U.S. uses less than 2 percent of the world’s supply.
The significance is limited compared to the importance of semiconductors.
Our daily activities, from consumer gadgets to national security, are powered by lithium-based batteries. They offer fixed grid storage and make it possible for the transportation sector to be electrified.
What, for instance, is a consumer?Consumers are any person or entity who uses an item or service in its entirety. Here are a few instances: a client who spends money having their hair styled and trimmed by a hairstylist.
What is a customer vs. a consumer?A customer is always the one who uses a something or service in the end, even if they didn't buy it. When a client makes a purchase and uses the good or service personally, they are considered a consumer. Customers always buy goods or services, even if they are not the final consumers.
To know more about consumer visit:
https://brainly.com/question/30132393
#SPJ1
What could you do to promote energy conservation and the use of renewable energy at your school
or in your community?
How is the Internet of Things (IoT) changing manufacturing?
Manufacturers need fewer workers with degrees in science.
Manufacturers can outsource work more effectively.
Manufacturers can make better predictions about sales.
Products contain systems that let them talk to each other.
Adopting the Industrial Web of Things can benefit manufacturing companies on all fronts, including customer happiness, production efficiency, and strategic business choices.
What does the word "business" mean?An organization or entrepreneurial entity engaging in economic, commercial, or professional activities is referred to as a business. Organizations can be for-profit corporations or charitable institutions. Limited liability firms, sole proprietorships, trusts, and partnerships are among the several forms of businesses.
What does the word business also mean?Calling, employment, métier, vocation, pursuit, and work are a few typical synonyms for business. All of these terms refer to "a specific persistent activity engaged in specifically to earn one's living," but the word "business" implies involvement in commerce or the administration of finances.
To know more about business visit:
https://brainly.com/question/1384274
$SPJ1
How does manufacturing create the multiplier effect?
It spends money in additional sectors.
It supports economies of scale.
It multiplies profits from each sale.
It multiplies salaries and wages based on output.
The mining, utility, and supplier inputs are increased, and it opens up job and investment options in all the other industries that consume its goods, including retail, construction, and transportation.
What qualifies as retail?Commerce is the sale of products and services to people with the intention of making a profit from each transaction. It entails face-to-face or telephone-based direct interaction with consumers or clients.
Is a food store a retail establishment?This retail sales sector includes the subsector of food and beverage retailers. Businesses with in Food and drinks Stores subsector often sell food and drink products from fixed points of sale.
To know more about retail visit:
https://brainly.com/question/28963307
#SPJ1
What are the differences between job shop manufacturing and batch manufacturing?
the level of production and the way that an item is made
the organizational structure and the quality of materials
the size of the factory and the number of workers
the worker’s skill level and the number of items being made
While mass manufacturing employs highly specialized equipment, devices, and tools, shops use broad sense ones. Tools for general and specific purposes can both be used in batch manufacturing.
Devices What do you mean?Devices are objects or systems that have a specific purpose or goal, including online communications devices like cell phones. The phrase left on your own devices, on the other hand, alludes to your freedom and capacity for entertainment.
Is a desktop a device?A desktop computer is a piece that personal equipment designed to be placed on top of a typical office desk. It connects to the hardware that people have used to utilize a computer, such as the keyboard, mouse, and display.
To know more about devices visit:
https://brainly.com/question/11599959
#SPJ1
What is one reason striking an arc is more difficult with the 7018 electrode than the 6010?
A.Thickness of the flux coating on the electrode
b. Angle the arc must be struck
c. Length of the electrode
d. Type of electrode holder which must be used
One reason striking an arc is more difficult with the 7018 electrodes than the 6010 is due to the thickness of the flux coating on the electrodes.
What makes it strike?The 7018 electrode has a thicker coating of flux than the 6010 electrodes, which makes it more difficult to strike an arc. The flux coating on the 7018 electrodes is designed to provide better shielding of the weld pool and produce a higher-quality weld, but it also makes it more difficult to start the arc. In order to strike an arc with a 7018 electrode, the operator needs to use a more forceful and deliberate technique than with a 6010 electrode.
To know more about striking an arc, Check out:
brainly.com/question/30294802
#SPJ1
What is the interesting part of Shigeru Ban's design?
The interesting part of Shigeru Ban's design is his use of unconventional and sustainable materials, such as cardboard tubes and shipping containers, in his architecture.
Who is Shigeru Ban and why is he important?Shigeru Ban is a Japanese architect and engineer who is known for his innovative and environmentally conscious designs. He is particularly recognized for his work in disaster relief, where he has designed temporary shelters using recyclable materials for refugees and victims of natural disasters.
Ban has won numerous awards for his work, including the Pritzker Architecture Prize, and is widely regarded as a leader in sustainable and humanitarian architecture.
He is also an advocate for disaster relief and has established the Voluntary Architects' Network, an organization that provides architectural support to communities in need after natural disasters.
Learn more about Shigeru Ban:
https://brainly.com/question/28102463
#SPJ1
What is the negative side of Shigeru Ban's design?
One potential negative aspect of Shigeru Ban's design is that his buildings may not always be cost-effective. The use of unconventional and sustainable materials can be more expensive than traditional building materials, and the unique design elements of his buildings may also require specialized construction techniques and equipment, driving up costs.
What is Shigeru Ban's design?Shigeru Ban is a renowned architect known for his innovative designs, particularly in the use of sustainable and eco-friendly materials. While his designs are highly regarded by many in the architectural community, there are also some criticisms of his work.
Therefore, Another criticism of Shigeru Ban's work is that some of his designs may not be as functional or practical as more conventional buildings. For example, some of his structures may be less efficient in terms of space utilization or may require more maintenance than traditional buildings.
Learn more about design from
https://brainly.com/question/2604531
#SPJ1
What toxic substances is released when welding stainless steel?
Answer:
Chromium
Explanation:
Chromium is a component in stainless steel, nonferrous alloys, chromate coatings and some welding consumables. . Chromium is converted to its hexavalent state, Cr(VI), during the welding process. . Cr(VI) fume is highly toxic and can damage the eyes, skin, nose, throat, and lungs and cause cancer. .
What is the most important contribution that manufacturing makes to a nation’s status as a world power?
builds global networks through outsourcing
produces tools and equipment to defend the country
keeps manufacturing equipment and technology away from terrorists
maintains control over materials and equipment
____ are designed to make it easier for employees to get health and safety information about chemicals
A:Safety Data Sheets (SDS
B:ANSI standards
C:Personal protective equipment standards
D:Globally Harmonized Systems (GHS)
The correct answer is (D). Globally Harmonized Systems (GHS). The Office of Occupational Safety and Health of the US Labor Department developed the Hazard Communication Standard.
What does "Globally Harmonized System" mean?Globally Harmonized System for Classification and Labeling of Chemicals is known as GHS. It is a technique of chemical hazard communication that can be used by nations all around the world. GHS was created by a global team of hazard identification specialists from the United Nations (UN).
What does the Globally Harmonized System aim to achieve?In order to better protect the environment and human health during in the handling, transport, and use of chemicals, the GHS intends to ensure that data on the hazardous qualities of chemicals is accessible around the world.
Learn more about Globally Harmonized Systems here:
https://brainly.com/question/17672124
#SPJ1
need help with 1.2.3 multiview structure cards on PTLW
Answer:
I'm not sure I understand what the question would be.
but the build is a half cylinder layer on its side, with two rectangular pillars stacked upright beside that cylinder. and a shirt rectangular pillar across the top on its side, short side touching the upright pillars, broad side face front/back.
17.) A customer complains that a vehicle has an off-center steering wheel.
Technician A says that an incorrect toe adjustment could be the cause.
Technician B says that an incorrect camber setting could be the cause.
Who is right?
OA. A only
OB. B only
OC. Both A and B
OD. Neither A nor B
Answer:
C
Explanation:
An incorrect Camber can affect the wheel alignment
An incorrect toe adjustment can also be the cause ie C
Storing parts outside doesn't cause any environmental risks as long as the items are covered
False?
I'm guessing this is a true or false because if it is parts can easily be blown away and get damaged (or the covering can get blown away) but if its not a true or false then i dont gotchu
