What is the Celsius temperature of 100.0 g of chlorine gas in a 35.0 L container at 800 mmHg?
a. 159 ∘C
b. 46 ∘C
c. 318 ∘C
d. -114 ∘C

The difference between the two is the height of the mercury in the manometer (0.170 atm).

Mercury has the chemical symbol Hg and the atomic number 80. It was formerly known as hydrargyrum, derived from the Greek phrase hydor (water) as well as argyros (silver) (silver). Mercury is the one metallic element known to just be liquid at normal temperatures and pressures; the only other element known to be liquid under such conditions is indeed the halogen bromine, tho metals including caesium, gallium, but also rubidium melt a little above room temperature.

The height difference between the two sides of the mercury in the manometer that the student found was 0.890 atm - 762 Torr = 0.170 atm. This is because the pressure of the gas in the bulb (0.890 atm) is higher than the atmospheric pressure (762 Torr).

To learn more about mercury
https://brainly.com/question/24257702
#SPJ4

One mole of each element contains Avogadro's number of atoms, which is 6.022 x 10^23 atoms. Therefore, all three substances have the same number of atoms, which is 6.022 x 10^23 atoms.

Considering the definition of molality, the molality of the KCl in the solution is 6.56 moles/kg.

Molality, or molal concentration, is the amount of a substance dissolved in a given mass of solvent. It is defined as the moles of a solute per kilogram of solvent.

The Molality of a solution is determined by the expression:

molality= number of moles of solute÷ kilograms of solvent

Molality in this case

In this case, you know:

mass of KCl= 105 g

mass molar of KCl= 74.55 g/mole

number of moles of solute= mass of KCl÷ mass molar of KCl= 105 g÷ 74.55 g/mole= 1.41 moles

Mass of solvent = 215 g of water= 0.215 kg (being 1000 g=1 kg)  

Replacing in the definition of molality:

Molality= 1.41 moles÷ 0.215 kg

Molality= 6.56 moles/kg

The molality of the solution is 6.56 moles/kg.

Learn more about molality:

brainly.com/question/20366625

#SPJ4

The answer is that the percent composition of sulfate in the unknown sulfate salt is 100%. This indicates that all of the salt was sulfate, and that the white precipitate was composed entirely of sulfate.

Percent composition is a concept in chemistry that refers to the relative proportions of the elements that make up a chemical compound, expressed as a percentage by mass.

The percent composition of sulfate in the unknown salt can be calculated using the following equation:
(Mass of precipitate/Mass of unknown sulfate salt)*100 = % composition of sulfate
In this case, the calculation is:
(0.563 g/0.343 g)*100 = 164.4%
Since it is not possible for something to have more than 100% composition, the answer is that the percent composition of sulfate in the unknown sulfate salt is 100%. This indicates that all of the salt was sulfate, and that the white precipitate was composed entirely of sulfate.

To learn more about percent composition
https://brainly.com/question/17021926
#SPJ4

Once an action potential reaches the end bulbs of a neuron, the first event in synaptic transmission is the release of neurotransmitters from the presynaptic neuron.

When an action potential reaches the end bulbs, it causes the opening of voltage-gated calcium channels in the presynaptic membrane. This influx of calcium ions into the presynaptic neuron triggers the release of neurotransmitters stored in vesicles at the synapse.

The neurotransmitters then diffuse across the synaptic cleft, the small space between the presynaptic and postsynaptic neurons, and bind to receptors on the postsynaptic membrane. This binding causes a change in the electrical or chemical properties of the postsynaptic neuron, leading to the initiation or inhibition of an action potential in the postsynaptic neuron.

It's worth noting that, this process is called synaptic transmission, it's the process by which an action potential in one neuron causes an electrical or chemical signal in another neuron, muscle cell or gland cell.

In the octahedral crystal field, there are two subgroups of the d orbitals that are separated from one another by energy: three t2g and two eg orbitals.

Crystal field splitting in the octahedral complex. The splitting of the degenerate level in the presence of a ligand is referred to as crystal field splitting. The energy difference between the t2g and eg levels is denoted by the letter "o." (subscript o stands for octahedral).

A regular octahedron is a closed crystallographic structure that has isometric symmetry and eight equilateral triangle-shaped faces to set it apart from the definition of an octahedron that is given below. Frequently found in isometric minerals like magnetite, pyrite, fluorite, and diamond.

For more information on octahedral crystal, go to:

https://brainly.com/question/29805362

#SPJ4

Under a standard conditions diamond converts to graphite spontaneously.

The constant of thermodynamic equilibrium K is the correct quotient of species activities in a reaction equilibrium. An activity cannot be many orders of magnitude greater than 1 at ordinary temperature as well as pressure.

Thermodynamic properties are termed as system characteristics that can specify the system's state. Some constants, such as R, do not explain the state of a system and so they are not attributes. Transformation of diamond to graphite is spontaneous as well as advantageous, according to thermodynamics. However, because of kinetics rather than thermodynamics governs this reaction, it proceeds at an exceedingly slow rate. Diamond will be kinetically stable but thermodynamically unstable.

To know more about diamond here

https://brainly.com/question/9286031

#SPJ4

We know that oven cleaners are basic in nature ranging pH from 11-13 and hence can change the universal indicator Blue or purple.

To learn more about universal indicator from the given link

https://brainly.com/question/26797119

#SPJ1

Answer: The correct answer is Option A. Compound Y will have the highest boiling point.

Intermolecular forces are the forces that hold the molecules of compounds together. The more the strength of these forces is more will be the force of attraction between them. Hence a compound having stronger intermolecular forces will be hard to break or boil.

So a compound having strong intermolecular force will have a high boiling point as it takes more energy to break apart these molecules.

In the given question compound Y has highest boiling point so it has the maximum intermolecular force between its atoms or molecules.

For more information on intermolecular forces ,click below:

https://brainly.com/question/1277429?referrer=searchResults

The molarity of 2500 ml of a solution that contains 160 grams of ammonium nitrate (nh4no3) is 0.600M.

Molarity is a measure of the concentration of a solution. The concentration of a solution can be determined by measuring the mass of the solute and the volume of the solution. Molarity is a useful measure when trying to understand how much of a solute is present in a given volume of solution. It can be used to compare the strength of different solutions, and also to calculate how much solute is required for a given volume. Molarity is an important concept in chemistry and is used in many areas of science.

To learn more about molarity
https://brainly.com/question/14469428
#SPJ4

To calculate the percent yield, we need to divide the actual yield (the amount of product produced) by the theoretical yield (the amount of product that should be produced based on the stoichiometry of the reaction) and multiply by 100.

Actual yield = 280 kg acetaminophen

Theoretical yield = 280 kg acetaminophen + 70 kg waste

percent yield = (actual yield / theoretical yield) x 100

percent yield = (280 / (280 + 70)) x 100 = 280/350 x 100 = 80%.

So the percent yield is 80%. This means that 80% of the theoretical yield was actually produced, and 20% of the theoretical yield was lost as waste.

The key difference between test and negative control groups in an experiment is that Control groups check the mean effectiveness of an intervention whereas test use the technique of matching.

Assigning people on the basis of chance ensures that both known and unknown invalidating factors are cancelled out, and that this occurs automatically rather than being dependent on individual judgment and trustworthiness. In behavioral and social (as well clinical) research, the ideal scientific experiment is a so-called randomized controlled trial, briefly an RCT.

Members of control groups are not supposed to develop group cohesion because that would entail a contaminating factor in the experiment. Researchers are interested in the average response of individual members rather than in their behavior as a group (see Clinical Trials and Intervention Studies).

To know more about control group here

https://brainly.com/question/28601688

#SPJ4

The carbon-nitrogen link in the N-methylidene hydroxylamine molecule has a bond order of 2.

A molecule is the smallest unit of any material that is composed of one or more elements and is capable of existing independently while maintaining all of the substance's physical and chemical properties. Further atom division occurs within molecules. For instance, the symbols for the oxygen atom and molecule are O and O2, respectively.

Its original definition, "the smallest unit of a substance that yet preserves the qualities of that substance," was intended to be encompassed by this designation. "An atom is a body that cannot be cut in two; a molecule is the smallest conceivable component of a specific substance," wrote James Maxwell in 1873 when defining atom and molecule.

To know more about molecule visit:

https://brainly.com/question/19556990

#SPJ4

The [OH-] Of A 0.180 min F- Solution. Ka For HF Is 6.8 X 10-4. E.

[OH^-] = 0.004 Moles

To determine the [OH-] of a solution, we can use the relationship between the acid dissociation constant (Ka) and the base dissociation constant (Kb).

The relationship is: Kb x Ka = Kw

Where Kw is the ion product constant of water which is 1.0 x 10^-14 at 25°C.

We know that the Ka of HF is 6.8 x 10^-4. To find the Kb of F-, we'll use the above terms.

Kb x 6.8 x 10^-4 = 1.0 x 10^-14

Kb = 1.0 x 10^-14 / 6.8 x 10^-4

Kb = 1.47 x 10^-11

To find the [OH-] of the solution, we'll use theformulae:

[OH-] = sqrt(Kb)

[OH-] = sqrt(1.47 x 10^-11)

[OH-] = 0.0038

So the [OH-] of the solution is 0.0038 M

However, the question requires to express the answer using two significant figures. So, the [OH-] of the solution is 0.004 M

To know more about solution please refer: https://brainly.com/question/1416865

#SPJ4

The Ksp expression for A2B3(s) in terms of [A] and [B] is Ksp,  the Ksp Equation for the specified solid is Ksp = 4x3.

Ksp = [a] [b]2, where Ksp is the maximum amount of solute that can dissolve at equilibrium. If you make x=a, you know that b=2x because there is twice as much b as a. Molar solubility is merely another word for molarity. These values for both a and b in respect of x allow you to calculate Ksp as [x] [2x]2, which equals Ksp=4x3.

∠K=∠K                           [Common]

∴  △KNP∼△KML        [By AA-criterion of similarity]⇒  KMKN =

ML

NP

[∵ Corresponding sides of similar triangles are proportional] ⇒   b+cc= ax⇒x= b+cac

​KSP=[x] [2x]2:

You may make Ksp equal to [x] [2x]2 with all those values a and conversely in terms of x, which implies that Ksp equals [x] [4x]3.

To know more about ksp visit:

https://brainly.com/question/27132799

#SPJ4

The ratio of partial pressures (o2:ne) in the container is 2.07.

The pressure that is exerted by one among the mixture of gases if it occupies the same volume on its own is known as Partial pressure. Every gas exerts certain pressure in a mixture. The total pressure of a mixture of an ideal gas is the sum of partial pressures of individual gases in the mixture, based on the following equation:

[tex]V_{x}[/tex] denotes the partial pressure of the particular gas.

[tex]P_{x}[/tex] indicates the partial pressure of the gas x.

[tex]V_{tot}[/tex] denotes the total volume of the mixture.

Nx indicates the amount of gaseous substance.

[tex]P_{tot}[/tex]denotes the total pressure of the mixture.

[tex]N_{tot}[/tex] is the total amount of substance in a mixture.

Given that,

[tex]$$P_0=7.36 \text { with, } v_0=36 . \quad T=298 k$$[/tex]

we know that,

[tex]$$\begin{aligned}P_{O_2} v_3=n_0 & \{T \\\text { m } \quad n_{2_2} & =\frac{P_0 \times V_{\mathrm{O}_2}}{R T}=\left(\frac{7.362 m \times 34}{0.082 \times 298}\right) \\n_{\mathrm{B}_2} & =0.90_3 \mathrm{~m} 1\end{aligned}$$[/tex]

Now,

[tex]$$\begin{aligned}& P_{\text {Ne }}=5.08 \mathrm{~atm} \quad V_{\text {Ne }}=2.10 \mathrm{~L} \\& n_{\text {re }}=\frac{P_{\text {re }} \times V_{\text {Ne }}}{R T} \\& n_{\text {re }}=\frac{(5.08 \times 2.10)}{(0.182 \times 298)}=0.436\end{aligned}$$[/tex]

Now,

in container pressure of [tex]$O_2=P_{0_2}({mix})$[/tex]

in container pressure of Ne [tex]=P_{Ne}({mix})$[/tex]

[tex]& P_2({mix})=x_{0_2} \times P_{\text {total }} . \quad \quad P_{\text {total }}=f_2+P_{\text {are }} \\&\end{aligned}[/tex]

[tex]P_{0_2}({mix})$[/tex] = [tex](\frac{0.903}{0.90308})[/tex]×[tex]12.44[/tex]      = [tex]( 7.36+5.08)[/tex]

[tex]P_{0_2}({mix})$[/tex] = [tex]8.38[/tex]atm                [tex]Patom[/tex] [tex]=12.44[/tex] atm

[tex]$$\begin{aligned}& P_{\text {Ne (mix)}}=x_{\text {ne }} \times P_{\text {total }} \\& =\frac{0.436}{(0.90870 .436)} \times 12.44 \\& P_{\text {Ne(mix) }}=4.03 \text { atm } \\&\end{aligned}$$[/tex]

Now,

[tex]$\begin{aligned} \frac{P_{0_2 \text { (mixther) }}}{P_{\text {Ne (Mistare) }}} & =\left(\frac{8.38}{4.03}\right) \\ & =2.07\end{aligned}$[/tex]

Therefore, the ratio of partial pressures (o2:ne) in the container is 2.07.

For more such questions on Partial pressures:

https://brainly.com/question/13199169

#SPJ4

The expression can be factored as (4h + 11)(4h + 11).

What exactly is an expression?

In chemistry, an expression is a basically statement or equation that describes the relationship between different chemical quantities. It usually involves mathematical operations and chemical symbols that represent elements and compounds. Expressions are used to describe chemical reactions, predict their outcomes, and develop new theories and models of chemical behavior.

This is because 4h + 11 can be written as (2h + 5)(2h + 5) and since 4h + 11 appears twice in the expression, we can factor it out of the entire expression.

To know more about expression,

https://brainly.com/question/112703

#SPJ1

The wavelength will be longer the higher the magnitude of the fundamental quantum number to which the electron is hopping. Thus, the longest wavelength is produced by the n = 6 to p = 8 transition.

The length of a wave is expressed by its wavelength. The wavelength is the distance between one wave's crest and the following wave's crest. The wavelength can also be determined by measuring from the "trough" (bottom) of one wave to the "trough" of the following wave.

The distance that a wave repeats is measured by its wavelength. The letter lambda () stands for these recurrences, also known as wavelengths. Energy travels through a medium as waves (like the atmosphere, the vacuum, or even the ocean).

To know more about wavelength visit-

https://brainly.com/question/12924624

#SPJ4

This indicates that it is a proton acceptor, which qualifies it as a Bronsted base.

Any species that can accept a proton and needs one pair of electrons to bond to the H+start text, H, end text, start superscript, plus, end superscript is referred to as a Brnsted-Lowry base. Since water is amphoteric, it can function as both a Brnsted-Lowry acid and a base. A Bronsted-Lowry base is a compound that can accept a hydrogen ion, whereas a Bronsted-Lowry acid can donate one. A Lewis base is a substance that can give up two electrons, whereas a Lewis acid can take in two electrons.

Here,

It qualifies as a Bronsted base because this suggests that it is a proton acceptor.

To know more about Bronsted base,

https://brainly.com/question/148529

#SPJ4

The amount that would be produced by the reaction if it were complete is known as the theoretical yield. yield in percentage: 0.15 / 0.16 x 100 = 93.75%

Chemical Response: Chemical reactions are the processes by which a substance or substances change chemically to create a new substance or substances with entirely new attributes. Products are completely distinct in nature and identity from reactants.

Combination, decomposition, single-replacement, double-replacement, and combustion are the five fundamental types of chemical reactions. You can classify a reaction into one of these groups by looking at the reactants and products. Several categories will apply to some reactions.

To know more about reaction visit:

https://brainly.com/question/28984750

#SPJ4

As the pressure on an increases, the volume of a gas declines because the gas atoms are forced closer together.

Let's first go through PV = nRT, the ideal gas law. P stands for pressure in atmospheres, V for volume in liters, n for moles of particles, T for temperature in Kelvin, and R for the ideal gas constant in this equation (0.0821 liter atmospheres per moles Kelvin).

What impact does pressure have on the reaction's speed? Pressure raises the concentration of the gases, which raises the pace of reaction. The reaction rate falls in the opposite direction and rises in the direction of less gaseous molecules.

To know more about pressure visit:

https://brainly.com/question/15110960

#SPJ4

The dissolution of agcl 55.7  kJ⋅mol−1, The free energy change for the dissolution of AgCl is 55.7  kJ⋅mol−1 and the solubility product of silver chloride is 1.7  × 10^-10.

The mathematical concept of "product" is the combination of more than one number. In those other words, a formula that specifies the multiplicands. The outcome of multiplication the two numbers together, multiplier and multiplicand, is the product.

AgCl(s) ⇄ Ag+(aq) + Cl−(aq)

ΔG∘rxn =  77.1 kJ⋅mol−1 + (−131.2 kJ⋅mol−1) - ( −109.8 kJ⋅mol−1)

ΔG∘rxn = 55.7  kJ⋅mol−1

Then;

ΔG∘rxn = -RTlnKsp

Ksp = e^-(ΔG∘rxn/RT)

Ksp = e^-(55.7  × 10^3J⋅mol−1 /8.314 × 298 K)

Ksp = 1.7  × 10^-10

A product, or an expression that specifies factors to be multiplied, is what happens when you multiply two numbers in mathematics. For instance, 30 is the result of multiplying 6 by 5 to get 5.

To know more about product visit:

https://brainly.com/question/22852400

#SPJ4

The equilibrium constant at 615 K for each of the following reactions-

A.)  4.622 * 10^(-5)

B.)  5.545

The ratio of reactant to product amounts that is used to predict chemical behavior is the definition of the equilibrium constant for a chemical process. In a state of equilibrium, the forward reaction rate equals the backward reaction rate.

A static (like a body acted upon by forces whose resultant is zero) or dynamic (like a reversible chemical reaction where the velocities in both directions are equal) state of balance between opposing forces or actions: a state of intellectual or emotional equilibrium.

To know more about equilibrium constant visit-

https://brainly.com/question/15118952

#SPJ4

The total work performed is nRT * 0.693

The work done by an ideal gas during an expansion at a constant temperature from volume V to 2V can be calculated using the equation work = nRT * ln(Vf/Vi).

Where n is the number of moles of gas, R is the ideal gas constant, T is the temperature, Vf is the final volume and Vi is the initial volume.

In this case, the initial volume is V and the final volume is 2V, so

the work done is nRT * ln(2V/V).

Since ln(2) is equal to 0.693, the work done is nRT * 0.693. Keep in mind, this equation is only true for certain types of gas at specific temperatures and pressures.

Read more about ideal gas:

https://brainly.com/question/15634266

#SPJ4

The pH of a neutral aqueous solution at 0 °c will be 7.46.

In case of H2O, the concentration of hydronium ions, or H⁺, will be equal to the concentration of the hydroxide ions i.e [H⁺] = [OH⁻].

Remember, Kw = [H⁺][OH⁻] for water and if [H⁺] and [OH⁻] are both equal, we can easily solve by taking the square root of Kw.

[H⁺] = sqrt(0.12*10^-14) = 3.46*10^-8

(2 sig figs. Keep some extra so there will be not a rounding error.)

and remember that pH = -log[H⁺] = -log(3.46*10^-8) = 7.46

(The rules for sig figs are that if you take the log of a number with x significant figures, then the result will have x significant decimal places.)

The pH of water is 7.46

To know more about pH here

https://brainly.com/question/15289741

#SPJ4

The concentration of the lithium hydroxide solution is 0.034 M.

To find the concentration of the lithium hydroxide solution, we can use the balanced equation for the neutralization reaction between phosphoric acid and lithium hydroxide:

H₃PO₄ + 3LiOH -> Li₃PO₄ + 3H₂O

We can also use the stoichiometry of the reaction to determine the number of moles of lithium hydroxide that were neutralized by the phosphoric acid. Since the ratio of moles of acid to moles of base is 1:3, we can use the following formula:

C(LiOH) = (moles of LiOH) / (volume of LiOH in liters)

To find the moles of LiOH, we can use the volume and concentration of the phosphoric acid:

moles of H₃PO₄

= (18.48 mL) * (1.66 M)

= 30.6248 moles

moles of LiOH

= (30.6248 moles) * (1 mol LiOH / 3 mol H₃PO₄)

= 10.2083 moles

To find the concentration of the lithium hydroxide solution, we can divide the moles of LiOH by the volume of LiOH:

C(LiOH) = (10.2083 moles) / (298.70 mL * 0.001 L/mL) = 0.034 M

Learn more about  phosphoric acid from

https://brainly.com/question/14812997
#SPJ1

The molar mass of the unknown gas is 17.64 g/mol.

Molar mass is a measure of the mass of a given chemical compound, which is calculated by dividing the mass of the substance in grams by its amount in moles.

The molar mass of the unknown gas can be calculated using Graham's law of effusion, which states that the rate of effusion of a gas is inversely proportional to the square root of its molar mass. The equation can be written as follows:
rate of effusion of unknown gas = (rate of effusion of methane) x (sqrt(molar mass of unknown gas))/sqrt(molar mass of methane)
Substituting the given values, we get:
29.0 ml/min = (47.8 ml/min) x (sqrt(molar mass of unknown gas))/sqrt(16.04 g/mol)
Solving for the molar mass of the unknown gas, we get:
molar mass of unknown gas = (16.04 g/mol) x (29.0 ml/min)^2 / (47.8 ml/min)^2
molar mass of unknown gas = 17.64 g/mol

To learn more about molar mass
https://brainly.com/question/21334167
#SPJ4

Phosphorus pentoxide is the chemical name for a molecule in which five oxygen atoms are bound to two phosphorus atoms (P2O5).

A potent drying & dehydrating agent is phosphorus pentoxide. P2O5 can be used in a wide range of processes, including the dehydrating of amides to nitriles, which requires for the elimination of a water molecule.

Triple super phosphate is the name given to the concentrated superphosphate, which contains 46% P2O5. It is possible to use this fertiliser on any soil and with any crop. It should be used along with organic manure on acidic soils. It may be used prior to, during, or after transplantation.

To know more about Phosphorus pentoxide visit :

https://brainly.com/question/28024394

#SPJ4

If the reaction between 8.3g of sodium & 4.5g of chlorine produces an actual yield for sodium chloride of 6.4g, so the percent yield becomes 86%.

The ionic compound salt, also known as sodium chloride, has the chemical formula NaCl. Sodium chloride is utilized as electrolytes replenisher to help lessen heat cramps caused over by excessive sweating. This drug is also used to make a standard isotonic sodium chloride solution. It's used as a preservative as well as a spice for enhance flavor. In addition, sodium chloride is used to make polymers and other products.

By using the formulae -

Actual yield divided by theoretical yield multiplied by 100 to get percent yield.

percent yield = 6.4 / 7.4 × 100

percent yield = 86%

To know more about sodium chloride visit :

https://brainly.com/question/14516846

#SPJ4

H₂ gas is collected over water in a sample. The pressure exerted by this gas is 0.97 atm.

Water displacement can be used to gather a gas created during a chemical reaction. As a result of being collected above water, the gas isn't really pure because it has been mixed with water vapor via evaporation. Dalton's law can be used to calculate how much of the desired gas is present after taking the contribution of the water vapor into account.

Then, the total pressure is given by [tex]\mathrm{P_{total}=P_{dry\;gas}+P_{water\;vapor}}[/tex]. Then, the total pressure for the given situation is written as [tex]\mathrm{P_{total}=P_{H_2}+P_{H_2O}}[/tex]. Using this formula, the pressure exerted by the hydrogen is calculated as follows,

[tex]\begin{aligned}\mathrm{P_{H_2}}&=\mathrm{P_{total}-P_{H_2O}}\\&=\mathrm{1.03\;atm-0.06\;atm}\\&=\mathrm{0.97\;atm}\end{aligned}[/tex]

The required answer is 0.97 atm.

To know more about Dalton's law:

https://brainly.com/question/14119417

#SPJ4